®
HyFlex STATIC CONTROL
The 11-100 HyFlex® SC is manufactured with conductive
X-Static™ yarn and a patented foamed nitrile static
dissipative coating. This exceptionally ergonomic glove
provides high performance dexterity with
exceptional electrical properties.
Extremely effective for electronic assembly operations where
user hand protection and product protection against static
discharge is needed. In addition to potentially reducing hand
injuries associated with demanding assembly operations,
HyFlex SC may also reduce the risk of yield loss due to
exposure to oils and residual contaminants
associated with bare hand assembly.
Industry Leading Gloves from the Industry Leader
Ansell is the world leader in industrial hand protection.
All gloves are produced from the highest quality materials in
ISO 9002 registered manufacturing facilities, and are tested
in accordance with ASTM standards. Supporting you with
the largest global technical group–Ansell is your best choice.
Product Characteristics
Electrical Properties
Dexterity
Grip
Chemical Resistance
Best
11-100
Recommended Usage:
Electronics assembly,
circuit board assembly,
wiring applications,
ESD sensitive component
handling, equipment
maintenance
Technical Data
Material
Glove Design
Cuff Design
Color and Finish
Cleanroom Compatibility
Launderability
Quality Standards
Electrical Properties
Surface Resistance (S11.11)
Volume Resistance (S11.12)
In-Use Resistance
(NFPA electrode on palm)
In-Use Static Charge
Decay Time, 1000-10 V
Tribocharge, Finger Swipe
on Steel Charge Plate
11-100
15-gauge knit
yarn liner with patented* foamed nitrile palm
and finger coat. X-Static yarn is anti-microbial and anti-fungal.
Hand-specific. Ergonomically designed for excellent dexterity, comfort and long wear.
Elasticized knit wrist. Color banded cuff indicates glove size.
Heather knit with gray palm coat.
HyFlex SC gloves are not specifically designed or packaged for cleanroom environments.
However, final usage should be determined by the purchaser.
Glove may be laundered and re-used following laundering instructions
included with each package.
Manufactured in ISO 9002 registered facilities.
Liner
Coating
Bare Hand
<1 Megohm
<1000 Megohm
—
<1 Megohm
<650 Megohm
—
<1 Megohm
<1 Megohm
<1 Megohm
X-Static™
<0.1 sec.
<0.1 sec.
<0.1 sec.
20V
50V
20V
S11.11 and S11.12 conducted at 22°C and 12% RH; in-use and tribocharge tests conducted at 22°C at 50% RH
with a standard one-megohm-connected wrist strap.
Typical Properties
Tabor at 500g
EN Performance Ratings:
Abrasion
Cut
Puncture
Tear
Sizes:
Color Band
Packaging
1500 revolutions
6
Purple
7
Red
2
1
3
1
8
Yellow
9
Brown
10
Black
12 pairs (1 dozen) gloves per polybag, 144 pairs (12 dozen) gloves per case.
NOTE: The information contained herein represents typical performance values and characteristics for the product and
is not to be construed or used as actual product performance specifications.
*U.S. Patent No. 4,515,851
Canada- 105 Lauder; Cowansville, Que. J2K 2K8
Tel. 800-363-8340 Fax. 888-267-3551
United States- 1300 Walnut St.; Coshocton, OH 43812
Tel. 800-800-0444 Fax. 800-800-0445
www.ansellpro.com/ce
2131
©2001 Ansell
All Rights Reserved.
HyFlex 11-100/5/01