Georg Fischer Fifth Wheel Assemblies and Accessories

advertisement
FIFTH WHEEL
ASSEMBLIES
FOR YOUR
TRACTOR UNIT
Efficiency
Safety
and Reliability
SECTION F
20
SK-S 36.20 PLUS (standard)
The lightweight, cast 20t fifth wheel
•
•
•
•
•
•
•
•
•
Weight optimised fifth wheel
Dead weight reduced by 8 kg
Reliable and robust
Single-handed operation
Automatic safety lock
Simple and safe wear adjustment
Permanent, maintenance-free bearings
Optimised lubrication channels for effective
grease flow
Connections for central lubrication
Technical data
Automatic locking
Type
SK-S 36.20 PLUS
SK-S 36.20 PLUS
SK-S 36.20 PLUS
SK-S 36.20 PLUS
SK-S 36.20 PLUS
Overall height
mm
128
150
185
225
250
Imposed load
t
20
20
20
20
20
D-value
kN
152
152
152
152
152
Weight
kg
116
116
119
121
131
Angle of inclination
degree (w1/w2)
4.5° / 6°
8° / 13°
17° / 26°
23° / 30°
29° / 42°
Imposed load
t
20
20
20
20
20
D-value
kN
152
152
152
152
152
Weight
kg
116
116
119
121
131
Angle of inclination
degree (w1/w2)
4.5° / 6°
8° / 13°
17° / 26°
23° / 30°
29° / 42°
Order no.
662 129 046
662 129 047
662 129 048
662 129 031
662 129 049
Locking with carabiner hook
Type
SK-S 36.20 PLUS
SK-S 36.20 PLUS
SK-S 36.20 PLUS
SK-S 36.20 PLUS
SK-S 36.20 PLUS
•
•
•
•
Overall height
mm
128
150
185
225
250
Order no.
662 129 026
662 129 027
662 129 028
662 129 030
662 129 029
Tilt angle to ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486
Approved for forced steering
EU test no.: e 1-00-0218
Type approval, Germany: M 5134
Dimensions
Mounting hole pattern according to DIN 74081
Subject to modifications in dimensions and design
21
Spare parts SK-S 36.20 PLUS
Item
1
2
2
2
2a
2a
Component (price per piece)
Repair kit for locking mechanism and bearings
Repair kit for locking mechanism and bearings
Repair kit for locking mechanism (9, 11, 12, 18, 21)
Repair kit for locking mechanism (9, 11, 12, 18, 21)
Repair kit for bearings (13, 15, 23)
Repair kit for wear ring (12,18)
Repair kit for wear ring (12,18)
Fifth wheel plate (PLUS)
Operating handle, complete (2a, 2b)
Operating handle
Operating handle
Adjustment plate
Adjustment plate
Serial no.
13000 - ...
0 - 12999
13000 - ...
0 - 12999
Pcs.
13000 - ...
0 - 12999
13000 - ...
12000 - 12999
0 - 11999
13000 - ...
0 - 12999
22
1
1
1
1
1
1
Order no.
662 101 493
662 101 477
662 101 492
662 101 475
662 101 473
662 101 566
662 101 565
662 129 471
662 129 166
662 129 146
662 129 130
662 129 158
662 129 133
Item
2b
2b
3
3
Component (price per piece)
Cap bolt
Cap bolt
Mounting bracket 128 mm
Mounting bracket 150 mm
3
3
3
9
10
10
10
10a
10b
10c
10d
11
12
Mounting bracket 185 mm
Mounting bracket 225 mm
Mounting bracket 250 mm
Coupler jaw
Locking hook
Locking hook
Locking hook
Stopper
Locking plate
Bush
Hex. bolt
Pin
Wear ring
12
13
14
15
16
16a
Wear ring
Rubber damper
Tensioning bar
Bearing insert
Tension spring
Tension spring
17
18
18
19a
19a
20
21
21a
23
24
26
26a
27
27
28
29
29
30
34
35
35
36
37
38
Carabiner hook with chain
Cap bolt
Cap bolt
Hex. bolt
Hex. bolt
Washer
Circlip
Supporting washer
Hex. bolt
Manufacturer's plate
Rivet
Rivet
Plastic plug
Plastic plug
Hammer rivet
Lubrication tube
Lubrication tube
Grease plug
Automatic latch
Safety flange for carabiner hook
Safety flange for carabiner hook
Guide plate
Lock nut
Hex. bolt
Lock nut (not shown)
Grease nipple (not shown)
Eyebolt (not shown)
Plastic plug (not shown)
Serial no.
13000 - ...
0 - 12999
13000 - ...
12000 - 12999
0 - 11999
13000 - ...
0 - 12999
12999 - ...
0 - 13000
13000 - ...
0 - 12999
13000 - ...
0 - 12999
13000 - ...
0 - 12999
13000 - ...
12000 - ...
0 - 11999
0 - 12999
0 - 12999
0 - 12999
0 - 12999
0 - 12999
The spare parts for the SK-S 36.20 PLUS are fully compatible with the SK-S 36.20.
Repair kits also apply to SK-S 36.20 PLUS D.
23
Pcs.
2
1
2
2
Order no.
659 112 371
659 100 017
662 129 383
662 129 484
2
2
2
1
1
1
1
1
1
1
1
1
1
662 129 485
662 129 389
662 129 386
662 129 134
662 129 156
662 129 143
662 129 129
662 129 381
662 129 387
662 129 374
662 129 600
662 129 375
662 129 377
1
2
2
2
1
1
662 129 373
662 114 110
662 129 388
662 130 101
662 126 411
662 129 317
1
2
2
7
5
1
1
1
4
1
2
1
4
2
1
1
1
1
1
1
1
1
1
2
1
1
1
4
662 100 574
659 112 372
662 126 155
659 112 359
662 126 172
662 126 175
659 100 027
659 100 026
662 129 606
659 120 380
662 126 173
662 126 179
662 126 223
662 126 223
662 126 151
659 144 106
662 129 392
662 129 380
662 129 153
662 129 147
662 129 376
662 129 144
659 100 029
662 111 202
662 126 176
662 126 224
662 126 465
662 129 393
SK-S 36.20 PLUS W (low maintenance)
The lightweight, low maintenance cast 20t fifth wheel
•
•
•
•
•
•
•
•
•
•
Weight optimised fifth wheel
Dead weight reduced by 8 kg
Designed for highway application
Less grease consumption*
Plastic wear plates easy to change
Central lubrication system connection not
required
Single-handed operation
Automatic safety lock
Simple and safe wear adjustment
Permanent, maintenance-free bearings
* For automatic lubrication of the locking mechanism,
we recommend the use of our grease dispenser with adaptor.
Technical data
Automatic locking
Type
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
Overall height
mm
128
150
185
225
250
Imposed load
t
20
20
20
20
20
D-value
kN
152
152
152
152
152
Weight
kg
116
116
119
121
131
Angle of inclination
degree (w1/w2)
4.5° / 6°
8° / 13°
17° / 26°
23° / 30°
29° / 42°
Imposed load
t
20
20
20
20
20
D-value
kN
152
152
152
152
152
Weight
kg
116
116
119
121
131
Angle of inclination
degree (w1/w2)
4.5° / 6°
8° / 13°
17° / 26°
23° / 30°
29° / 42°
Order no.
662 131 011
662 131 012
662 131 013
662 131 042
662 131 014
Locking with carabiner hook
Type
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
SK-S 36.20 PLUS W
•
•
•
Overall height
mm
128
150
185
225
250
Order no.
662 131 005
662 131 006
662 131 007
662 131 045
662 131 008
Tilt angle to ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486
Approved for forced steering
EU test no.: e 1-00-0218
Dimensions
Mounting hole pattern according to DIN 74081
Subject to modifications in dimensions and design
24
Spare parts SK-S 36.20 PLUS W
25
Item
1
2
2a
2b
3
3
3
3
3
9
10
10a
10b
10c
10d
11
12
13
14
15
16
16a
17
18
19a
20
21
21a
23
24
26
28
29
29
32
34
35
36
38
39
Component (price per piece)
Repair kit for locking mechanism and bearings (9,11,12,13,15,18,21,23)
Repair kit for locking mechanism (9,11,12,18,21)
Repair kit for bearings (13,15,23)
Repair kit for wear plate (38, 39)
Repair kit for wear ring (12, 18)
Fifth wheel plate (PLUS)
Operating handle, complete ( incl. 2a, 2b)
Adjustment plate
Cap bolt
Mounting bracket 128 mm
Mounting bracket 150 mm
Mounting bracket 185 mm
Mounting bracket 225 mm
Mounting bracket 250 mm
Coupler jaw
Locking hook
Stopper
Locking plate
Bush
Hex. bolt
Pin
Wear ring
Rubber damper
Tensioning bar
Bearing insert
Tension spring
Tension spring
Carabiner hook with chain
Cap bolt
Hex. bolt
Washer
Circlip
Supporting washer
Cap bolt
Manufacturer's plate
Rivet
Hammer rivet
Lubrication tube
Lubrication tube
Grease nipple
Automatic latch
Safety flange
Guide plate
Wear plate
Flanged screw
The spare parts for the SK-S 36.20 PLUS W are fully compatible with the SK-S 36.20 W.
Repair kits also apply to SK-S 36.20 PLUS DW.
26
Serial no.
35178 - ...
0 - 35177
35178 - ...
Pcs.
1
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
2
1
1
1
2
7
1
1
1
4
1
2
1
1
1
1
1
1
1
2
12
Order no.
662 101 516
662 101 517
662 101 518
662 101 469
662 101 534
662 131 471
662 129 166
662 129 158
659 112 371
662 129 383
662 129 484
662 129 485
662 129 389
662 129 386
662 131 107
662 129 156
662 129 381
662 129 387
662 129 374
662 129 600
662 129 375
662 131 114
662 114 110
662 129 388
662 130 101
662 126 411
662 129 317
662 100 574
659 112 372
659 112 359
662 126 175
659 100 027
659 100 026
659 112 365
659 120 380
662 126 173
662 126 151
659 144 146
659 144 106
662 126 224
662 129 153
662 129 147
662 129 144
662 131 103
662 130 114
5(&266Š 6DIHW\ 6HQVRU6\VWHP
5HPRWH&RQWUROOHG6DIHW\6\VWHP
2SWLPXP&RXSOLQJ
7KHFRPSHWLWLYHVLWXDWLRQLQWKHWUDQVSRUWVHFWRULVFR
HOVH&RVWRSWLPLVDWLRQLVUHTXLUHGLQDOODUHDV1RER
GULYHUVVWDQGLQJLGOH
7KHSURSRUWLRQRIDUWLFXODWHGWUXFNVLQYHKLFOHIOHHWV
WKHPDLQFRPSRQHQWVLVWKHILIWKZKHHODVOLQNEHWZ
LPPXQLW\WRZHDULWVUHOLDELOLW\DQGHDV\RSHUDWLRQ
SHUIHFWIXQFWLRQRIWKHDUWLFXODWHGWUXFNDQGWKHUH
HIILFLHQF\
7RVWUHQJWKHQWKHZHDNHVWOLQNLQWKHFKDLQ*)
5(&266Š 5HPRWH&RQWUROOHG6DIHW\6\VWHP
9LVLEOH6DIHW\
:LWK5(&266Š*HRUJ)LVFKHUGHYHORSHG
V\VWHPIRUILIWKZKHHOV7KHQHZWKUHHVHQ
KLWFKLQJHYHQHDVLHU6WDWXVDQGRSHUDWLR
GLVSOD\HGYLVXDOO\DQGDFRXVWLFDOO\LQWKH
3HUIHFW6DIHW\
7KH5(&266Š V\VWHPLVDYDLODEOHH[
6.6‡ILIWKZKHHOVUHJDUGOHVV
VSHFLILFDWLRQVXFKDVORZPDLQWHQD
PRXQWLQJRUGXDOKHLJKW
([LVWLQJ6.6‡ILIWKZKHHOVF
XSJUDGHGZLWKWKHHDV\DQGFRVW
WLYHWRLQVWDOO5(&266Š UHWURILWN
1RWLFHDEOH/LJKWZHLJKW
7KH6.6‡3/86LVDQ
HFRQRPLFDOO\VRXQGFKRLFH
RIIHULQJJRRGYDOXHIRU
PRQH\7KHILIWKZKHHOKDV
IHZZHDULQJSDUWVDQGLV
H[WUHPHO\ORZPDLQWH
QDQFH7KHRSWLPLVHG
VSKHURLGDOJUDSKLWHFDVW
LURQILIWKZKHHOZHLJKV
NLORJUDPVOHVV7KH
3OXVLVIRUWKHOLJKWHVW
DSSURYHGWRQILIWK
ZKHHORILWVFDWHJRU\
27
6DIHW\
6HQVRUVDQGRQFRXSOHUMDZDQG
DXWRPDWLFODWFKPRQLWRUWKHVDIHDQG
FRUUHFWFRQGLWLRQRIWKHILIWKZKHHORQ
DSHUPDQHQWEDVLV
,WLVWKHGULYHU¶VGXW\WRPDNHVXUHWKDWHYHU\WKLQJLVHQJDJHG
DQGORFNHGFRUUHFWO\±DIWHUHYHU\FRXSOLQJSURFHVVDQGDIWHU
HYHU\VWRS5(&266ŠJLYHVWKHGULYHUHOHFWURQLFDVVLVWDQFH
LQGRLQJWKLV7KLVUHGXFHVWKHGULYHU¶VVWUHVVFRQVLGHUDEO\
$FFLGHQWVDQGXQQHFHVVDU\LGOHWLPHIRUYHKLFOHUHSDLUVFDQ
EHDYRLGHG
$5(&266Š VHQVRULQGLFDWHVWKHFRUUHFWKLWFKLQJKHLJKW7ZR
RWKHUVHQVRUVSHUPDQHQWO\PRQLWRUWKHFRQGLWLRQRIWKHILIWK
ZKHHO$Q\SUREOHPVDUHGLVSOD\HGYLVXDOO\DQGDFRXVWLFDOO\LQ
WKHFRFNSLW±WKDWPHDQVVDIHGULYLQJ
&RPIRUW
5(&266ŠHQDEOHVWKHPRQLWRULQJRIWKHHQWLUHFRXSOLQJ
SURFHVVIURPWKHFDE
7KHGULYHUGRHVQRWKDYHWROHDYHWKHYHKLFOHGXULQJEDG
ZHDWKHUWRFRQWUROWKHSURFHVV7KDWVDYHVWLPHDQGPDNHV
ZRUNPRUHSOHDVDQW±WKDWPHDQVGULYLQJZLWKFRPIRUW
(FRQRPLFHIILFLHQF\
7KH6.6‡ZLWK5(&266ŠLVDOVRWKHILUVWFKRLFHIURP
DQHFRQRPLFSRLQWRIYLHZ$ORQJHUVHUYLFHOLIHLVWKHUHVXOW
RIOHVVZHDUSDUWVDQGKLJKTXDOLW\PDWHULDOV7KHLQFUHDVH
LQFRPIRUWDQGVDIHW\ZLWK5(&266Š HQKDQFHVWKHGULYHUV
SHUIRUPDQFHDQGUHGXFHVLGOHWLPHUHVXOWLQJIURPWUDFWRU
IDXOWV±WKDWPHDQVHFRQRPLFGULYLQJ
6HQVRUPRQLWRUVWKHGLVWDQFHEH
WZHHQWUDLOHUSODWHDQGILIWKZKHHODQG
HQVXUHVWKHFRUUHFWSRVLWLRQGXULQJ
KLWFKLQJ
28
RECOSS® - the proven safety sensor system
for the SK-S 36.20 fifth wheel
Audio and visual display function in drivers cabin.
RECOSS is available for all models of the SK-S 36.20 PLUS fifth wheel.
To connect the RECOSS system you will need our RECOSS installation kit.
Model SK-S 36.20 PLUS S (standard, RECOSS)
Type
SK-S 36.20 PLUS S
SK-S 36.20 PLUS S
SK-S 36.20 PLUS S
SK-S 36.20 PLUS S
SK-S 36.20 PLUS S
•
•
Overall height
mm
128*
150
185
225
250
Imposed load
t
20
20
20
20
20
D-value
kN
152
152
152
152
152
Weight
kg
116
116
119
121
131
Angle of inclination
degree (w1/w2)
4.5° / 6°
8° / 13°
17° / 26°
23° / 30°
29° / 42°
Order no.
662 129 060
662 129 061
662 129 062
662 129 064
662 129 063
Tilt angle to ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486.
EU test no.: e1-00-0218
Model SK-S 36.20 PLUS WS (low maintenance, RECOSS)
Type
SK-S 36.20 PLUS WS
SK-S 36.20 PLUS WS
SK-S 36.20 PLUS WS
SK-S 36.20 PLUS WS
SK-S 36.20 PLUS WS
•
•
•
Overall height
mm
128*
150
185
225
250
Imposed load
t
20
20
20
20
20
D-value
kN
152
152
152
152
152
Weight
kg
116
116
119
121
131
Angle of inclination
degree (w1/w2)
4.5° / 6°
8° / 13°
17° / 26°
23° / 30°
29° / 42°
Order no.
662 131 037
662 131 038
662 131 039
662 131 041
662 131 040
Tilt angle to ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486.
For automatic lubrication of the locking mechanism, we recommend the use of our grease dispenser with adaptor.
EU test no.: e1-00-0218
Model SK-S 36.20 PLUS DS (direct mounting, RECOSS)
Type
SK-S 36.20 PLUS DS
SK-S 36.20 PLUS DS
SK-S 36.20 PLUS DS
•
•
•
Overall height
mm
148*
190
225
Imposed load
t
20
20
20
D-value
kN
152
152
152
Weight
kg
126*
135
143
Angle of inclination
degree (w1/w2)
9.5° / 13°
19° / 25°
24° / 30°
* Additional vendor-specific mounting plate
Please indicate vehicle type when placing orders (Mercedes-Benz, MAN, IVECO, DAF,...)
EU test no.: e1-00-0218
29
Order no.
662 129 225
662 129 226
662 129 227
Model SK-S 36.20 PLUS DWS (direct mounting, low maintenance, RECOSS)
Type
SK-S 36.20 PLUS DWS
SK-S 36.20 PLUS DWS
SK-S 36.20 PLUS DWS
•
•
•
•
Overall height
mm
148*
190
225
Imposed load
t
20
20
20
D-value
kN
152
152
152
Weight
kg
126*
135
143
Angle of inclination
degree (w1/w2)
9.5° / 13°
19° / 25°
24° / 30°
Order no.
662 131 046
662 131 047
662 131 048
* Additional OEM specific mounting plate
Please indicate vehicle type when placing orders (Mercedes-Benz, MAN, IVECO, DAF,...)
For automatic lubrication of the locking mechanism, we recommend the use of our grease dispenser with adaptor.
EU test no.: e1-00-0218
Model SK-S 36.20 HS (dual height, RECOSS)
•
RECOSS order no. for SK-S 36.20 H G2 see page 36
Model SK-S 36.20 PLUS VS (mounting angle, RECOSS, VOLVO)
Type
Overall height
mm
SK-S 36.20 PLUS VS
160
SK-S 36.20 PLUS VS
160
SK-S 36.20 PLUS VS
200
200
230
230
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
•
•
Imposed load
t
20
20
20
D-value
kN
152,3
152,3
152,3
Weight
kg
146
146
150
Angle of inclination
degree (w1/w2)
13° / 15°
13° / 15°
20° / 23°
Length L
mm
462,5
437,5
462,5
Order no.
662 129 228
662 129 231
662 129 229
20
20
20
152,3
152,3
152,3
150
153
153
20° / 23°
24° / 30°
24° / 30°
437,5
462,5
437,5
662 129 232
662 129 230
662 129 233
Length L
mm
462,5
437,5
462,5
437,5
462,5
437,5
Order no.
Angle of inclination in accordance with ISO 1726
EU test no.: e1-00-0218
Model SK-S 36.20 VS with central lubrication kit (mounting angle, RECOSS, VOLVO)
Type
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
SK-S 36.20 PLUS VS
•
•
Overall height
mm
160
160
200
200
230
230
Imposed load
t
20
20
20
20
20
20
D-value
kN
152,3
152,3
152,3
152,3
152,3
152,3
Weight
kg
146
146
150
150
153
153
Angle of inclination
degree (w1/w2)
13° / 15°
13° / 15°
20° / 23°
20° / 23°
24° / 30°
24° / 30°
662 129 236
662 129 239
662 129 237
662 129 240
662 129 238
662 129 241
Angle of inclination in accordance with ISO 1726
EU test no.: e1-00-0218
Model SK-S 36.20 PLUS VWS (mounting angle, low maintenance, RECOSS, VOLVO)
Type
SK-S 36.20 PLUS VWS
SK-S 36.20 PLUS VWS
SK-S 36.20 PLUS VWS
SK-S 36.20 PLUS VWS
SK-S 36.20 PLUS VWS
SK-S 36.20 PLUS VWS
•
•
•
Overall height
mm
160
160
200
200
230
230
Imposed load
t
20
20
20
20
20
20
D-value
kN
152,3
152,3
152,3
152,3
152,3
152,3
Weight
kg
146
146
150
150
153
153
Angle of inclination
degree (w1/w2)
13° / 15°
13° / 15°
20° / 23°
20° / 23°
24° / 30°
24° / 30°
Length L
mm
462,5
437,5
462,5
437,5
462,5
437,5
Angle of inclination in accordance with ISO 1726
For automatic lubrication of the locking mechanism, we recommend the use of our grease dispenser with adaptor.
EU test no.: e1-00-0218
30
Order no.
662 131 055
662 131 065
662 131 056
662 131 066
662 131 057
662 131 067
RECOSS® installation kits
Our RECOSS installation kits contain all necessary components (electric control unit and wiring loom) for connecting the
sensor safety system. Not included are the indicator lights which must be separately ordered from the respective vehicle
manufacturer.
Type
Installation kit for all SK-S 36.20 PLUS models
Installation kit for all SK-S 36.20 PLUS models (ADR version)
Order no.
662 129 343
662 129 344
RECOSS® conversion kits
All models of the SK-S 36.20 and SK-S 36.20 W can be retro-fitted with our RECOSS 2 sensor safety system.
Type
Order no.
662 129 188
662 129 189
Conversion kit for SK-S 36.20, complete
Conversion kit for SK-S 36.20 W, complete
RECOSS® spare parts
Item
1
1
2
3
3
4
5
6
7
8
8
9
10
11
12
13
Type
Repair kit for lock mechanism SK-S 36.20 S
Repair kit for lock mechanism and bearings SK-S 36.20 S
Repair kit for lock mechanism SK-S 36.20 WS
Repair kit for lock mechanism and bearings SK-S 36.20 WS
Coupler jaw SK-S 36.20 S
Coupler jaw SK-S 36.20 WS
Circlip
Automatic latch, complete (2 sensors)
Automatic latch, complete
Bolts for lock mechanism (M10)
Bolts for coupler jaw sensor (M4)
Bracket for top plate sensor
Bolts for top plate sensor (M6)
Wiring loom 2 sensors (8a, 8b, 8c, 8d)
Wiring loom 3 sensors (8a, 8b, 8c, 8d)
Electronic control unit (ADR / GGVS type)
Mounting adaptor for control unit
Cable clip
Cable tie
Labels for indicator lights
RECOSS installation and operating manual
31
Pcs.
1
1
1
2
2
1
2
1
1
3
3
1
1
Order no.
662 101 716
662 101 717
662 101 718
662 101 719
662 129 161
662 131 115
659 100 027
662 129 165
662 129 174
659 112 359
659 112 376
662 129 195
659 112 352
662 129 170
662 129 173
662 129 184
662 129 169
662 129 168
659 100 045
662 129 190
662 129 187
SK-S 36.20 H G2 (dual height)
Dual height fifth wheel, Generation 2
The Georg Fischer dual height fifth wheel is designed
for 2-axle semi-trailer tractors for large-volume transport.
The dual height feature allows the use of the same
semi-trailer tractor with various trailers.
•
•
•
•
•
•
•
•
Extremely robust and user-friendly
Weight optimized model
Permanent, maintenance-free bearings
Connections for central lubrication
Simple and safe wear adjustment
Automatic safety lock option
Approved for forced steering
EU test no.: e 11-00-1381
Ordering instructions
•
•
•
•
•
The standard versions listed are not pre-drilled
Mounting hole patterns available for DAF, Mercedes-Benz, IVECO, MAN, Renault, SCANIA, VOLVO
Indicate type and coupling point of semi-trailer tractor when ordering
The coupling point is measured from the centre of the rear axle to the centre of the kingpin in lowered position
The manufacturer's mounting kits are to be used.
SK-S 36.20 H G2
Type
Spec.
Standard
Standard
Standard
SK-S 36.20 H G2
SK-S 36.20 H G2
SK-S 36.20 H G2
Overall height
mm
167 - 267
167 - 317
167 - 367
Imposed load
t
15
15
15
D-value
kN
110
110
110
Weight
kg
333
338
340
Dimensions
mm
1205 x 980
1205 x 980
1205 x 980
D-value
kN
110
110
110
Weight
kg
333
338
340
Dimensions
mm
1205 x 980
1205 x 980
1205 x 980
D-value
kN
110
110
110
Weight
kg
333
338
340
Dimensions
mm
1205 x 980
1205 x 980
1205 x 980
Weight
kg
333
338
340
Dimensions
mm
1205 x 980
1205 x 980
1205 x 980
Order no.
662 132 311
662 132 312
662 132 313
SK-S 36.20 HS G2 (RECOSS)
Type
Spec.
SK-S 36.20 HS G2
SK-S 36.20 HS G2
SK-S 36.20 HS G2
Standard
Standard
Standard
Overall height
mm
167 - 267
167 - 317
167 - 367
Imposed load
t
15
15
15
Order no.
662 132 331
662 132 332
662 132 333
SK-S 36.20 HW G2 (low maintenance fifth wheel plate)
Type
Spec.
SK-S 36.20 HW G2
SK-S 36.20 HW G2
SK-S 36.20 HW G2
Standard
Standard
Standard
Overall height
mm
167 - 267
167 - 317
167 - 367
Imposed load
t
15
15
15
Order no.
662 132 351
662 132 352
662 132 353
SK-S 36.20 HWS G2 (low maintenance fifth wheel plate, RECOSS)
Type
Spec.
SK-S 36.20 HWS G2
SK-S 36.20 HWS G2
SK-S 36.20 HWS G2
Standard
Standard
Standard
Overall height
mm
167 - 267
167 - 317
167 - 367
Imposed load
t
15
15
15
D-value
kN
110
110
110
Order no.
662 132 371
662 132 372
662 132 373
Lift sub-assembly, complete
Type
Lift sub-assembly, complete
Lift sub-assembly, complete
Lift sub-assembly, complete
Spec.
Standard
Standard
Standard
Overall height
mm
167 - 267
167 - 317
167 - 367
32
Weight
kg
252
257
259
Dimensions
mm
1205 x 980
1205 x 980
1205 x 980
Order no.
662 132 051
662 132 052
662 132 053
Technical data
•
•
•
Movement around lateral axis at basic height ±8°
Operation: adjustable (to max. 8 bar) in unhitched state by means of the tractor's compressed air system with
pneumatic support (air bellows)
Coupling point change when adjusting height: 11 mm [267] / 24 mm [317] / 34 mm [367]
Dimensions
•
•
•
•
The fixing holes (max. Ø 21 mm) may be drilled in these 10 areas.
Increase number of bolts accordingly when using reduced diameter
Mounting hole pattern in accordance with DIN 74081
Subject to modifications in dimensions and design
Mounting kits for SK-S 36.20 H G2
Type
Mounting kit 726
Mounting kit 728
Mounting kit 729
Mounting kit 730
Mounting kit 731
Mounting
IVECO (Stralis), MAN (TGA), DAF (XF95)
VOLVO (FH12)
SCANIA (CA, LA, DA)
Mercedes-Benz (Actros)
RENAULT (Magnum, Premium)
33
Model
14 x M16
20 x M14
14 x M18
14 x M20
14 x M16
Order no.
662 101 726
662 101 728
662 101 729
662 101 730
662 101 731
Spare parts SK-S 36.20 H G2
When placing your order, please always indicate the article no. as well as the serial no. of your dual height fifth
wheel. Spare parts for fifth wheel plate see spare parts list of the respective fifth wheel type.
34
Item
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
17
18
19
20
23
24
25
26
27
28
29
30
31
32
33
34
35
38
39
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
60
61
62
63
Component (price per piece)
Repair kits for rocker bearing (11,23,39)
Repair kits for support bearing (19,20,24,25,35)
Base plate
Gear bolt
Actuating rod
Left support 100 mm
Right support 100 mm
Rocker arm
Locking lever
Toothed wheel
Splint pin
Stud
Right locking plate
Left locking plate
Guide pipe
Washer
Hex. bolt
Spring washer
Hex. bolt
Hex. bolt
Locking nut
Bush
Bush
Bush
Air bellows
Air inlet adaptor
90° elbow connector
Cap
Washer
Grease nipple
Spring washer
Hex. bolt
Sealing ring
Spacer
Spacer set **
Spacing washer
Spring lock
Spring lock
Left support 150 mm
Right support 150 mm
Left support 200 mm
Right support 200 mm
Mounting plate
Operating valve (3/2-way valve)
Pneumatic hose
Central lubrication system BEKA-MAX
Toothed rack (LHS)
Flanged bush
Cap head bolt
Nut
Nut
Fifth wheel top plate assembly (available on request)
Shaft
Hex. bolts
Spring pin
*) Set contains spacers D 116x80x0.5, D 116x80x1, D 116x80x2
**) Set contains spacers D 80x45x0.5, D 80x45x1, D 80x40.5x2
***) Set contains spacing washers D 65x40.5x0.5, D 65x40.5x1, D 65x40.5x2
35
Pcs.
1
1
1
1
1
1
1
1
1
2
1
1
1
8
4
2
2
2
2
4
2
4
1
1
1
4
6
4
4
4
1
3
3
3
2
1
1
1
1
1
1
1
1
1
1
5
5
3
2
1
2
4
2
Order no.
662 132 195
662 132 196
662 132 105
662 132 161
662 132 162
662 132 122
662 132 123
662 132 165
662 132 170
662 132 119
662 132 205
662 132 110
662 132 111
662 132 155
662 132 120
662 132 206
662 101 359
662 132 202
662 132 203
662 132 211
662 132 215
662 132 132
662 132 130
662 132 146
662 132 200
662 132 135
662 126 493
659 144 142
662 126 204
662 132 214
662 132 208
662 132 207
662 132 201
662 132 198
662 132 197
662 132 199
662 132 172
662 132 171
662 132 125
662 132 126
662 132 128
662 132 129
662 132 139
662 132 156
662 132 169
662 132 041
662 132 173
662 132 174
662 132 381
659 115 313
659 115 312
662 132 292
659 112 627
662 132 293
SK-HD 38.36
Fifth wheels for extra heavy transportation
•
•
•
•
•
Permanent, maintenance-free bearings
Conversion from 3½" to 2" and vice versa
possible
Simple adjustment of lock mechanism
Suitable for steering wedge
Special pneumatically operated version for
harbour application
Technical data
Type
SK-HD 38.36
SK-HD 38.36
SK-HD 38.36.2
SK-HD 38.36.2
•
•
•
Lock
size
inch
3½"
3½"
2"
2"
Overall height
mm
150
190
150
190
Imposed
load
t
36
36
23
23
D-value
Weight
Angle of inclination
Order no.
kN
260
260
162
162
kg
185
185
185
185
degree (w1/w2)
12° / 12°
15° / 12°
12° / 12°
15° / 12°
662 111 065
662 111 066
662 111 085
662 111 074
Approved for forced steering
EU test no.: e 1-00-0386 (3½")
EU test no.: e 1-00-0387 (2")
Dimensions
Mounting hole pattern according to DIN 74081
Subject to modifications in dimensions and design
36
Spare parts SK-HD 38.36 from serial no. 40001301
Please note: Also applies to the serial no. 40001055-1144 and 40001195-1216
37
Item
1
2
4
6
9
9
10
10a
10b
11
12
12
13
14
15
16
16a
17
18
19
19a
19b
20
22
23
24
26
28
32
35
Component (price per piece)
2" Repair kit for locking mechanism and bearings (9,11,12,13,15,18,23)
2" Repair kit for locking mechanism (9,11,12,18)
2" Repair kit for bearings (13,15,23)
2" Repair kit for wear ring (12,18)
3½" Repair kit for locking mechanism and bearings (9,11,12,13,15,18,23)
3½" Repair kit for locking mechanism (9,11,12,18)
3½" Repair kit for bearings (13,15,23)
3½" Repair kit for wear ring (12,18)
Conversion kit from 3½" to 2" (9,12,18,24,26)
Conversion kit from 2" to 3½" (9,12,18,24,26)
Fifth wheel plate
Operating handle
Mounting bracket 150 mm
Mounting bracket 190 mm
Coupler jaw, 2"
Coupler jaw, 3½"
Locking hook
Cam
Lubrication tube assembly
Pin
Wear ring 2"
Wear ring 3½"
Rubber damper
Tensioning bar
Bearing
Tension spring
Tension spring
Carabiner hook with chain
Cap bolt
Stud
Hex. bolt
Cap bolt
Washer
Grease nipple
Hex. bolt
Manufacturer's plate
Rivet
Hammer rivet
Fork assembly
Safety flange
Tube clamp (not shown)
Plug for lubrication tube (not shown)
38
Pcs.
1
1
2
2
1
1
1
1
2
2
1
1
2
2
2
1
1
1
4
1
3
3
2
2
8
1
2
1
1
1
1
1
Order no.
662 101 706
662 101 708
662 101 457
662 101 710
662 101 707
662 101 709
662 101 457
662 101 711
662 101 704
662 101 705
662 111 254
662 111 276
662 111 293
662 111 256
662 111 249
662 111 247
662 111 239
662 111 317
659 144 106
662 111 344
662 111 342
662 111 343
662 111 259
662 111 258
662 111 264
662 126 410
662 111 130
662 100 574
659 112 624
662 126 449
659 112 359
659 112 358
662 126 175
662 126 224
659 112 510
659 120 380
662 126 173
662 126 151
662 111 314
662 111 281
662 111 345
662 111 346
Spare parts SK-HD 38.36 up to serial no. 40001300
Please note: Spare parts for serial numbers 40001055-1144, 40001195-1216
see new spare parts list from serial no. 40001301.
39
Item
1
2
4
6
9
9
10
10a
10b
11
12
12
13
14
15
16
16a
17
18
19
19a
19a
19b
20
22
23
24
26
28
29
30
31
32
35
Component (price per piece)
2" Repair kit for locking mechanism and bearings (9,11,12,13,15,18,23)
2" Repair kit for locking mechanism (9,11,12,18)
2" Repair kit for bearings (13,15,23)
2" Repair kit for wear ring (12,18)
3½" Repair kit for locking mechanism and bearings (9,11,12,13,15,18,23)
3½" Repair kit for locking mechanism (9,11,12,18)
3½" Repair kit for bearings (13,15,23)
3½" Repair kit for wear ring (12,18)
Conversion kit from 3½" to 2" (9,12,18,24,26)
Conversion kit from 2" to 3½" (9,12,18,24,26)
Fifth wheel plate
Operating handle
Mounting bracket 150 mm
Mounting bracket 190 mm
Coupler jaw, 2"
Coupler jaw, 3½"
Locking hook
Cam
Lubrication tube
Pin
Wear ring 2"
Wear ring 3½"
Rubber damper
Tensioning bar
Bearing
Tension spring
Tension spring
Carabiner hook with chain
Cap bolt
Stud
Hex. bolt
Hex. bolt
Cap bolt
Washer
Grease nipple
Hex. bolt
Manufacturer's plate
Rivet
Hammer rivet
Lubrication tube
Lock nut
Eyebolt
Fork
Safety flange
40
Serial no.
651711 - ...
0 - 651710
651711 - ...
Pcs.
1
1
2
2
1
1
1
1
1
2
1
1
2
2
2
1
1
1
4
1
3
5
3
2
2
8
1
2
1
1
2
2
1
1
Order no.
662 101 453
662 101 455
662 101 457
662 101 563
662 101 454
662 101 456
662 101 457
662 101 564
662 101 431
662 101 432
662 111 254
662 111 276
662 111 293
662 111 256
662 111 249
662 111 247
662 111 239
662 111 317
662 130 118
662 111 316
662 111 319
662 111 250
662 111 259
662 111 258
662 111 264
662 126 410
662 111 130
662 100 574
659 112 363
662 126 449
662 126 172
662 126 172
659 112 358
662 126 175
662 126 224
659 112 510
659 120 380
662 126 173
662 126 151
662 111 289
662 126 176
662 126 465
662 111 314
662 111 281
SK-HD 38.36 G (off-road use)
The cast 36t heavy duty fifth wheel
•
•
•
•
•
•
Suitable for off-road use with oscillating bearings
Max. tilt ± 7° around the longitudinal axis
Simple and safe handling
5-stage wear adjustment
Quick conversion from 3½" to 2" and back
Suitable for steering wedge applications
Technical data
Type
SK-HD 38.36 G
SK-HD 38.36.2 G
Lock Overall
size height
inch
mm
3½
290
2
290
D-value
kN
260
162
Imposed
load
t
36
23
Weight
Angle of inclination
Order no.
kg
272
272
degree (w1/w2)
17° / 14°
17° / 14°
662 111 088
662 111 089
Dimensions
Mounting hole pattern according to DIN 74081
Subject to modifications in dimensions and design
41
Spare parts SK-HD 38.36 G from serial no.
40001301
Important: Also applies to the serial no. 40001055-1144 and 40001195-1216
42
Item
1
2
9
9
10
10a
10b
11
12
12
16
16a
17
18
19
19a
20
22
24
26
28
35
55
56
57
58
59
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
Component (price per piece)
Repair kit for locking mechanism 3½" (9,11,12,18)
Repair kit for bearing sub-assembly 3 ½" (73,74,78,79,80,81,84,85,86)
Repair kit for locking mechanism 2" (9,11,12,18)
Repair kit for bearing sub-assembly 2" (73,74,78,79,80,81,84,85,86)
Locking mechanism kit (55, 56, 57, 58, 59)
Conversion kit 3½" to 2"
Conversion kit 2" to 3½"
Fifth wheel plate
Operating handle
Coupler jaw assembly 3½"
Coupler jaw assembly 2"
Locking hook assembly
Cam
Lubrication tube assembly
Pin
Wear ring 3½"
Wear ring 2"
Tension spring
Tension spring
Carabiner hook with chain
Cap bolt
Stud
Hex. bolt
Washer
Grease nipple
Manufacturer's plate
Rivet
Hammer rivet
Safety flange
Operating handle
Stopper
Countersunk screw
Locking plate
Cap bolt
Mounting bracket
Rocker arm
Trunnion pin
Bearing sleeve
O-ring
Spacing washer
Plate
Counterplate
Locking plate
Locking plate
Hex. bolt
Hex. bolt
Circlip
Spacing washer
Cylindrical notched pin
Grease nipple assembly
Grease nipple
Complete base assembly (not shown)
43
Pcs.
1
1
1
1
1
1
2
2
1
1
1
1
3
4
1
2
1
2
1
2
1
1
2
2
4
2
2
2
1
1
4
6
4
1
1
1
2
4
2
2
2
8
1
6
Order no.
662 101 456
662 101 487
662 101 455
662 101 487
662 111 313
662 101 704
662 101 705
662 111 261
662 111 276
662 111 247
662 111 249
662 111 239
662 111 317
659 144 106
662 111 347
662 111 343
662 111 342
662 126 410
662 111 130
662 100 574
659 112 624
662 126 449
659 112 359
662 126 175
662 126 224
659 120 380
662 126 173
662 126 151
662 111 281
662 111 297
662 111 296
662 100 371
662 111 298
662 126 155
662 111 299
662 111 303
662 111 306
662 111 300
662 111 301
659 122 075
662 111 304
662 111 307
662 111 305
662 111 308
662 111 203
659 112 320
662 111 302
659 122 074
662 111 311
662 111 312
662 126 224
662 111 096
Spare parts SK-HD 38.36 G up to serial no.
40001300
Important: Spare parts for serial numbers 40001055-1144, 40001195-1216
see new spare parts list from serial no. 40001301.
44
Item
1
2
9
9
10
10a
10b
11
12
12
16
16a
17
18
19
19a
20
22
24
26
28
29
30
31
35
55
56
57
58
59
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
Component (price per piece)
Repair kit for locking mechanism 3½" (9,11,12,18)
Repair kit for bearing sub-assembly 3 ½" (73,74,78,79,80,81,84,85,86)
Repair kit for locking mechanism 2" (9,11,12,18)
Repair kit for bearing sub-assembly 2" (73,74,78,79,80,81,84,85,86)
Locking mechanism kit (55, 56, 57, 58, 59)
Conversion kit 2" to 3½"
Conversion kit 3½" to 2"
Fifth wheel plate
Operating handle
Coupler jaw assembly 3½"
Coupler jaw assembly 2"
Locking hook assembly
Cam
Lubrication tube
Pin
Wear ring 3½"
Wear ring 2"
Tension spring
Tension spring
Carabiner hook with chain
Cap bolt
Stud
Hex. bolt
Washer
Grease nipple
Manufacturer's plate
Rivet
Hammer rivet
Lubrication tube
Lock nut
Eyebolt
Safety flange
Operating handle
Stopper
Countersunk screw
Locking plate
Cap bolt
Complete base assembly (70-86)
Mounting bracket
Rocker arm
Trunnion pin
Bearing sleeve
O-ring
Spacing washer
Plate
Counterplate
Locking plate
Locking plate
Hex. bolt
Hex. bolt
Circlip
Spacing washer
Cylindrical notched pin
Grease nipple assembly
Grease nipple
45
Pcs.
1
1
1
1
1
1
1
2
1
1
1
1
3
4
1
5
1
2
1
2
1
1
2
2
1
2
2
4
2
2
2
1
1
4
6
4
1
1
1
2
4
2
2
2
8
1
6
Order no.
662 101 456
662 101 487
662 101 455
662 101 487
662 111 313
662 101 432
662 101 431
662 111 261
662 111 276
662 111 247
662 111 249
662 111 239
662 111 322
662 130 118
662 111 316
662 111 250
662 111 319
662 126 410
662 111 130
662 100 574
659 112 363
662 126 449
662 126 172
662 126 175
662 126 224
659 120 380
662 126 173
662 126 151
662 111 289
662 126 176
662 126 465
662 111 281
662 111 297
662 111 296
662 100 371
662 111 298
662 126 155
662 111 096
662 111 299
662 111 303
662 111 306
662 111 300
662 111 301
659 122 075
662 111 304
662 111 307
662 111 305
662 111 308
662 111 203
659 112 320
662 111 302
659 122 074
662 111 311
662 111 312
662 126 224
SK-L 26.3
The new "lightweight" for distribution vehicles
Specially developed for distribution vehicles, Georg Fischer
offers a particularly lightweight and maintenance-friendly
fifth wheel with an imposed load of up to 3 tonnes for
reliable and flexible application.
•
•
•
Maintenance-friendly
Higher payload - lower dead weight
Optimum component design through spheroidal
graphite cast iron construction
Technical data
Type
SK-L 26.3
SK-L 26.3
•
•
Overall height
mm
120
120
D-value
kN
22.5
22.5
Weight
kg
34.5
34.5
Angle of inclination
degree (w1/w2)
30°/17.5°
30°/17.5°
Coupling point
Order no.
from 101 mm
up to 100 mm
662 119 005
662 119 006
Later conversion from ..005 to ..006 possible and vice-versa
EU test no.: e 1-00-0474
Dimensions
Subject to modifications in dimensions and design
46
Spare parts SK-L 26.3
Item
1
2
2a
3
9
10
11
11a
11b
13
14
Component (price per piece)
Fifth wheel plate
Operating handle for 662,119,005
Operating handle for 662,119,006
Mounting bracket
Coupler jaw assembly
Locking hook assembly
Pin
Hex. bolt
Nut
Rubber bush
Trunnion pin
16
17
18
19
19a
19b
23
24
26
28
34
35
35a
35b
35c
Tension spring
Carabiner hook with chain
Cap bolt
Stud
Hex. bolt
Nut
Cap bolt
Manufacturer's plate D/E/F
Rivet (3x8)
Hammer rivet
Bridge plate
Safety flange
Hex. bolt
Hex. bolt
Bush
Serial no.
0 - 108683
0 - 108683
108684 - ...
0 - 108683
47
Pcs.
1
1
1
2
1
1
2
2
2
2
2
Order no.
662 119 118
662 119 134
662 119 148
662 119 147
662 119 137
662 119 139
662 119 141
659 112 355
662 126 152
662 119 111
662 119 143
2
1
1
1
1
1
4
1
2
1
1
1
1
4
1
662 126 410
662 100 574
659 112 358
662 119 144
659 112 357
659 100 036
659 112 356
659 120 375
662 126 173
662 126 151
662 119 142
662 119 135
659 112 360
659 112 359
662 119 146
Mounting plates without holes for mounting
angles
Mounting plates serve to attach the fifth wheel to the vehicle
and must be securely connected to the frame assembly of the
semi-trailer tractor.
Georg Fischer mounting plates with diverse heights enable
you to optimally take advantage of the permissible total overall
heights of tractors.
•
•
•
•
•
•
•
•
Made of high-grade, weldable steel plate
Large assortment, optimal design for all tractors and fifth wheels
7 individual mounting plate heights: 12, 16, 22, 40, 50, 100 and 150 mm
The combinations of mounting plates and fifth wheels allow 23 different total overall heights and thereby cover all
needs from the lowest to the highest construction type
Approved for forced steering
Mounting hole pattern according to DIN 74081, 74084 and ISO 3842
Wider range of application due to higher imposed load and higher D-value
Type approved
Mounting plates without holes for mounting angles
for fifth wheels up to 22t imposed load
Mounting hole pattern according to DIN 74081 / ISO 3842
Type
MP 300
MP 299
MP 433 *
MP 486 **
Overall Imposed
height
load
mm
t
12
22
12
22
12
22
12
20
D-value
Weight
kN
162,4
162,4
162,4
152,0
kg
64,0
69,0
60,0
44,5
MP 106
22
22
162,4
41,0
MP 199
22
22
162,4
45,0
MP 249
22
22
162,4
48,5
MP 060
MP 078
MP 331
MP 445
40
40
100
150
22
22
16
15
162,4
162,4
108,0
108,0
45,0
49,0
81,0
A
B
Mounting kit
Type approval
Order no.
EG
e11-00-0379
e11-00-0379
e11-00-0382
e11-00-0953
662 101 300
662 101 299
662 101 433
662 101 486
e11-00-0380
662 101 106
e11-00-0380
662 101 199
e11-00-0384
662 101 249
e11-00-0378
e11-00-0378
e11-00-0383
e11-00-0117
662 101 060
662 101 078
662 101 331
662 101 445
Mounting kit
Type approval
Order no.
FW-MP
662 101 553
662 101 551
EG
e11-00-0385
e11-00-0387
662 101 301
662 101 274
mm mm
710 960
710 1060
710 960
650 960
FW-MP
662 101 555
662 101 555
662 101 514
662 101 555
662
101 353 / 662
665 960
101 442
662
101
353 / 662
665 1060
101 442
353 / 662
710 1060 662 101
101 442
665 960
662 101 498
665 1060
662 101 498
710 970
662 101 498
665 960
662 101 498
*) for SK-S 36.22 / Overall height 128 mm
**) for SK-S 36.20 / Overall height 128 mm (with cutout)
Mounting plates without holes for mounting angles
for fifth wheels up to 36t imposed load
Mounting hole pattern according to DIN 74084 / ISO 3842
Type
MP 301
MP 274 *
Overall Imposed
height
load
mm
t
16
36
50
36
D-value
Weight
kN
280
220
kg
85,0
72,0
A
B
mm mm
710 960
730 960
Suitable for SK-HD 38.36 / G
*) No stockkeeping, please request price and delivery schedule
48
Special mounting plates without holes for mounting angles
No stockkeeping. Prices, delivery schedules and additional pre-drilled mounting plates available by request.
Type
MP 515
MP 302 *
MP 246 **
Overall Imposed
height
load
mm
12
16
40
t
22
36
22
D-value
Weight
kN
162,4
280,0
162,4
kg
64,0
85,0
45,0
A
B
mm mm
710 960
710 1060
710 960
Mounting kit
Type approval
Order no.
FW-MP
662 101 555
662 101 553
EG
e11-00-0379
e11-00-0385
e11-00-0217
662 101 515
662 101 302
662 101 246
*) for SK-HD 38.36
**) Replaced by MP 060 (Observe special mounting instructions)
Dimensions
Hole pattern in accordance with DIN 74081/84 and ISO 3842
49
Mounting plates with predrilled holes for
mounting angles
The following mounting plates are already equipped with the respective mounting hole patterns of the manufacturers.
Prices and delivery schedules as well as additional pre-drilled mounting plates available by request.
Type
MP 526 *
MP 532
MP 544 *
MP 525 *
MP 464
MP 527 *
MP 531
MP 512
MP 574
MP 542
MP 511
MP 543
OEM
Overall Imposed
manufacturer height
load
hole pattern
mm
t
MB
12
20
IVECO
12
22
IVECO
12
20
MAN
12
20
MAN
12
22
SCANIA
12
20
SCANIA
12
22
DAF
22
22
MAN
22
22
SCANIA
22
22
DAF
40
20
SCANIA
40
22
D-value
Weight
A
B
Type approval
Order no.
kN
152,0
162,4
152,0
152,0
162,4
152,0
162,4
152,0
162,4
162,4
152,0
162,4
kg
40,0
63,0
63,0
40,0
64,0
40,0
64,0
40,0
41,0
41,0
40,0
45,0
mm
650
715
715
650
710
650
710
700
665
665
700
665
mm
960
960
960
960
960
960
960
960
960
960
960
960
EG
e11-00-0953
e11-00-0379
e11-00-0953
e11-00-0953
e11-00-0379
e11-00-0953
e11-00-0379
e11-00-0952
e11-00-0380
e11-00-0380
e11-00-0951
e11-00-0378
662 101 526
662 101 532
662 101 544
662 101 525
662 101 464
662 101 527
662 101 531
662 101 512
662 101 574
662 101 542
662 101 511
662 101 543
*) for SK-S 36.20 / overall height 128 mm (with cutout)
Technical data and fastener sets
Mounting hole pattern according to DIN 74084 / ISO 3842
Type
MP 526 *
MP 532
MP 544 *
MP 525 *
MP 464
MP 527 *
MP 531
MP 512
MP 574
MP 542
MP 511
MP 459
MP 543
Mounting kit
MP-VC
662 101 550
IVECO
IVECO
662 101 552
662 101 551
663 101 552
662 101 551
662 101 552
Mounting kit
FW-MP
662 101 555
662 101 555
662 101 555
662 101 555
662 101 555
662 101 555
662 101 353 / 442
662 101 353 / 442
662 101 353 / 442
662 101 498
662 101 498
662 101 498
A
mm
650
715
715
650
710
650
710
700
665
665
700
665
665
*) for SK-S 36.20 / overall height 128 mm (with cutout)
50
B
mm
960
960
960
960
960
960
960
960
960
960
960
960
960
C
mm
50
45
45
50,75
50,75
50
50
50
50,75
50
50
50,75
50
D
mm
860
860
860
880
880
880
880
880
880
880
880
880
880
E
8
12
12
8
8
8
8
12
8
8
12
8
8
F
mm
21
19
19
18
18
19
19
18
18
20
18
18
20
Slider
Bolted modular construction
Bolt-on slider base and fifth wheel assemblies
No welding required
Manual or air operation
Three different heights to obtain optimal towing height
525mm of travel at 37.5mm increments
Self-cleaning for easy trouble-free operation
51
TECHNICAL SPECIFICATION
TYPE SK-V 20 is produced in two versions:
Narrow slider
Wide slider
Part number
Z-662204507
Z-662206401
Overall width
960mm
1060mm
Overall length
1250mm
1250mm
Sliding distance
525mm
525mm
Application suits
European models
American and Japanese models
Suitable for all standard frame hole patterns.
Bolt hole centres (width): Narrow slider 880mm, Wide slider 952mm.
The slider type SK-V 20 is designed to move the fifth wheel on the tractor unit in a longitudinal direction.
The slider has 14 positions at increments of 37.5mm.
•
•
•
•
•
Maximum slider imposed load
Maximum D-thrust value
Minimum height fifth wheel
Slider base thickness
Weight
180 kN
135 kN
150mm
35mm
110/120kg
These sliders are designed to suit Georg Fischer fifth wheels with heights of 150, 185 and 250mm.
52
Gauge
The coupling lock and kingpin are subject to a certain amount
of wear. Our reference gauges for 2" and 3½" kingpins and
fifth wheels facilitate measurement of wear limits. Check the
kingpin for deformation and firm seating.
If the readings are lower than the limits shown here, the
kingpins or wear rings must be replaced by original Georg
Fischer parts.
A 3½" reference gauge is under development.
Technical data
Type
gauge
Nominal
size
inch
2"
Dimensions
Weight
Order no.
mm
166 x 108
kg
0.155
659 920 032
Operating instructions
The gauge surfaces may not slide over the Georg Fischer
kingpins. Measure lengthways and crossways, as well as at
various heights.
After performing these checks, thoroughly coat the semi-trailer
plate and the kingpin, as well as the top of the fifth wheel plate,
the locking mechanism and the wear ring, using a long-life,
high-pressure grease with molybdenum or graphite additive.
At short intervals, but at least at every lubrication servicing of
the semi-trailer tractor, the fifth wheel, semi-trailer plate and the
kingpin must be recoated with lubricant.
The reference gauge should not be able to slide into the closed
fifth wheel locking mechanism from above. Measure lengthways
and crossways.
Safety instructions
Before hitching, and especially before attaching the
semi-trailer for the first time and after each lubrication,
ensure that the locking mechanism of the fifth wheel is
in the "hitching" position.
After hitching by attaching the carabiner hook or by
setting the safety lever (with automatic locking), check
whether the locking mechanism is completely closed.
After hitching the fifth wheel
•
with carabiner hook: attach it
•
with automatic latch: check whether it is
engaged and the cam does not protrude
next to the operating handle
Important: Perform PULL TEST in a low gear.
53
5th WHEEL MAINTENANCE PLATE
Vehicle Reg
5th Wheel Make
Model
SN
Maintained to
Manufactures
Date
or NZS5450 7.2 & 7.3
Mileage
Serviced at
Job Number
Truck Stops (NZ) Limited P/N
54
Z-020175
Download