Large Globe Series
SINGLE COLOR STRANDS
PROJECT
FIXTURE TYPE
LOCATION
CONTACT
Product Description
MaxiLED Strands provide exceptionally long
strands of globe-lensed LEDs that can be
used to outline seafronts, buildings, and
bridges or connect architectural features
with colorful or white lighting. Each strand
is built for permanent installations with rugged, injection-molded outer globes and
heavy gauge wiring.
Product Specifications
• Power Input: 110-240VAC
(50/60 Hz)
PHONE
• Power Output: 24VDC.
• Light Output: Contact factory
or see maxiledlighting.com.
• Watts: .6W per Globe.
• Cable/Run Length: 200
Globes per strand. 105 m (345
ft) maximum strand length
including starter cable.
• LED Colors: Cool white, warm
white, red, green, blue, and
amber. More than one color
can be used on a single strand.
• Connectors: Water-tight (IP
68) and self-locking.
• Lumen Maintenance:
Estimated 85% lumen
maintenance at 30,000 hours,
L70 predicted life of 55,000
hours.
• Environment: Dry, damp, and
wet locations (IP 68). Not for
use as a submersible light.
Proper drainage required.
• Cable: 16 AWG. Weather
resistant insulated rubber
sheath with two core copper
conductors. Black or white.
• Mounting: Clips available
for zip-tie mounting to any
surface or walls. Trunking for
concealing cables and elastic
cable ties also available for
trees and live landscaping.
• Globe Lenses: UV stabilized
clear polycarbonate. Internally
prismatic for maximum optical
light output. Globe halves are
hermetically sealed.
• Operating Temperature: -25°
to 50°C (-13° to 122°F)
• Weight: Cable is 74g (2.6 oz)
per meter. Globe and LED are
44g (1.5 oz) per assembly.
• Listings: UL/cUL (pending),
CE, FCC, IK07 impact
protection, BS EN 60598, IEC
60598
MM (INS)
Dimensions
CABLE 6 (1/4) DIAMETER
16 (5/8)
26 (1-1/16)
82
(3-1/4)
62
(2-7/16)
63 (2-1/2)
www.maxiledlighting.com
Copyright © 2015. MaxiLED Lighting. All rights reserved. Specifications subject to change. Visit www.maxiledlighting.com for the most current product data. 060315-1.
Large Globe Series • SINGLE COLOR STRANDS
Ordering
EXAMPLES: SLG-CW-CL-BC-I-1000-9000-100-90, SLG-WW-ML-WC-M-180-3000-100-30
PRODUCT CODE
LED COLOR
LENS
-
SLG
CABLE COLOR
-
SLG MaxiLED Large
Globe Series
CW Cool white
-
WW Warm white
R Red
G Green
B Blue
A Amber
CL Clear lens
BC Black cable
ML Matte lens
WC White cable
PAT Pattern. Enter PAT and complete the following:
EXAMPLE: 2 red (R), 2 white
(W), two blue (B), repeat (<)
R
MEASUREMENT
UNITS
R
W
W
LENGTH OF
STARTER CABLE
M Metric units (cm)
I Imperial units (in)
B
B
<
LENGTH OF
GLOBE CABLE
CMS OR INS
NUMBER OF
GLOBES
-
GLOBE SPACING
-
CMS OR INS
1 TO 200
Starter Cable + Globe Cable <= 10,500 cm (4,133 ins)
CMS OR INS
Assumes Globes are spaced at
the same distance on the strand.
For inconsisently spaced Globes
on a strand, contact factory.
Ordering Definitions and Assistance
POWER
SUPPLY
GLOBE SPACING GLOBE SPACING STARTER CABLE
GLOBE SPACING GLOBE CABLE LENGTH OF GLOBE CABLE
NUMBER OF GLOBES
GLOBE SPACING
If you know the NUMBER OF GLOBES and the GLOBE
SPACING for a strand, you can verify your LENGTH
OF GLOBE CABLE.
If you know the LENGTH OF GLOBE CABLE and the
GLOBE SPACING, you can verify your NUMBER OF
GLOBES.
If you know the LENGTH OF GLOBE CABLE and the
NUMBER OF GLOBES for a strand, you can verify
your GLOBE SPACING.
A) NUMBER OF GLOBES (MAX 200)................
B) GLOBE SPACING (CMS OR INS).................
C) Divide answer A by answer B...........
www.maxiledlighting.com
A
B
A÷B
A) LENGTH OF GLOBE CABLE (CMS OR INS).
B) GLOBE SPACING (CMS OR INS).................
C) Divide answer A by answer B...........
A
B
A÷B
A) LENGTH OF GLOBE CABLE (CMS OR INS).
B) NUMBER OF GLOBES (MAX 200)................
C) Divide answer A by answer B...........
A
B
A÷B
Copyright © 2015. MaxiLED Lighting. All rights reserved. Specifications subject to change. Visit www.maxiledlighting.com for the most current product data. 060315-1.
Large Globe Series • SINGLE COLOR STRANDS
Installation Accessories
TREE
SURFACE MOUNT CLIP
ML-SLG-0001 Tree tie
ML-SLG-0005 Cable saddles
ML-SLG-0002 Cable tie
CATENARY
ML-SLG-0002 Cable tie
ML-SLG-0003 Rubber grommet
IP 68 CONNECTOR
SURFACE MOUNT TRUNKING
ML-SLG-0004 D line trunking. 3 m (39-3/8 in) length.
ML-SLG-0007 Flat bend
ML-SLG-0010 End cap
ML-SLG-0008 Equal tee
ML-SLG-0011 Internal bend
ML-SLG-0009 Coupler
ML-SLG-0012 External bend
ML-SLG-0006 Plug/socket
ML-SLG-0002 Cable tie
MM (INS)
Catenary Cable Installation 1
1. Place rubber grommets over MaxiLED cable
20 (13/16)
2. Secure MaxiLED cable
20 (13/16)
Make sure catenary cable is taught and secure. With the secure catenary cable above the MaxiLED cable, place a rubber grommet 20
mm (13/16 in) on both sides of the globe.
3. Repeat procedure
Using an appropriately sized UV resistant zip tie, secure the grommet
against the catenary cable. NOTE: Ensure grommet is placed on the
MaxiLED cable and not the catenary cable.
Alternative installation method
Repeat steps 1 and 2 until the entire strand is installed. Connect the
installed strand to the transformer.
Create a hoop effect. Ensure grommet is a minimum of 20 mm (13/16
in) from the globe where cables connect. Connect the installed strand
to the transformer.
This product must be installed by a qualified electrician in accordance
with all national and local electrical and construction codes. Failure to
comply with the installation instructions can result in injury or death.
1 Contact factory for instructions on installing product in landscaping (trees)
or in surface mounted applications.
!
www.maxiledlighting.com
Copyright © 2015. MaxiLED Lighting. All rights reserved. Specifications subject to change. Visit www.maxiledlighting.com for the most current product data. 060315-1.