Project:
Type:
Archer LED
Qty:
Patient Room Wall Light
S P EC IF ICATI ONS
I n terior
ARCHER LED
SPECIFICATIONS
The Archer bed light provides versatility with optional sequential switching for patient room ambient and task lighting. The sleek housing profile echoes the Chrysalite and can be used together to create a
complementary look in a lighting design. Multiple lamping and switching options allow this fixture to be used in a wide array of applications. As a bed light, placement above the patient on the headwall delivers
optimal distribution of light for reading and also comfortable ambient illumination. If a low voltage controller is included (optional), light levels can be adjusted via the nurse call system or using a separate pendant
pillow switch (optional). This fixture is also a good choice for guest lighting.
• Delivers multiple light levels for patient: indirect, direct, both
• Separate mounting plate makes installation easy; mount rigid but lightweight plate to wall and then install fixture
• Low voltage controller (option) allows patient control from nurse call system or separate pillow switch (option)
• Tool-free access to ballast compartment while fixture remains on wall
• Single-piece extruded aluminum body for extreme durability
• Entirely serviceable without removal from wall
Construction
Extruded aluminum housing
Die-cast aluminum handles
High impact acrylic lenses, UV treated to prevent yellowing with age
Polyester powder coat finish; anti-microbial powder coat finish
available
Wall mount brackets included. Packaged separately.
Voltage
120V
Dimming
0-10V dimming standard
Switching
Line voltage switching (by others)
Low voltage controller (optional) for patient control of up and down
light sequentially from nurse call system or pillow switch (optional)
2-position pull chain for on/off control or 4-position pull chain for
sequential control of up and down light (optional, 120V only)
Color Quality
>80 CRI
Driver
Roal Strato RSL035-09 or equivalent
Input Watts (As Tested)
Top and bottom mode 2U2D configuration, 4ft fixture – 102 WATTS
Top mode 2U2D configuration, 4ft fixture - 51 WATTS
Listings
CSA certified to meet US and Canadian standards. Damp location listed.
Weight
HPW336 – approximate shipping weight 20 lbs.
HPW348 – approximate shipping weight 30 lbs.
Light Output (As Tested)
Top and bottom mode 2U2D configuration, 4ft fixture - 10860 lumens
Top mode 2U2D configuration, 4ft fixture - 5490 lumens
Source
Nichia LED chips (or equivalent) mounted on linear boards
CATALOG NUMBER
Life Estimate
50,000 hours*
*LED life projection based on IES TM-21 and IES LM-80
Warranty
5-year limited warranty. Complete warranty terms located at:
www.AcuityBrands.com/CustomerResources/Terms_and_Conditions.aspx
Note: Actual performance may differ as a result of end-user
environment and application.
All values are design or typical values, measured under laboratory
conditions at 25 °C.
Example: HPW348 120 LED35 2U2D LV LCR AM
Series
HPW336
HPW348
Archer 3ft in Length
Archer 4ft in Length
Voltage
Lamping Type
Lamping
120
LED27
LED30
LED35
LED40
2U1D
2U2D
1U1D
1U2D
120V
2700K LED
3000K LED
3500K LED
4000K LED
Switching Config
LV
LV1L1
LV1R1
LV2L1
LV2R1
S2L2
S2R2
S2C2
Low Voltage Controller - Sequential Switching
LVC with Pillow Switch for Down Light on Left
LVC with Pillow Switch for Down Light on Right
LVC with Pillow Switch on Left - Sequencing Up + Down Light
LVC with Pillow Switch on Right - Sequencing Up + Down Light
On/Off Pull Chain on Left (top & bottom)
On/Off Pull Chain on Right (top & bottom)
On/Off Pull Chain on Center (top & bottom)
0U1DMT
0U2DMT
1U0DMB
2U0DMB
2 Rows LEDs Up, 1 Row LEDs Down
2 Rows LEDs Up, 2 Rows LEDs Down
1 Row LEDs Up, 1 Row LEDs Down
1 Row LEDs Up, 2 Rows LEDs Down
Only 1 Row LEDs Down with Top Plate
2 Rows LEDs Down with Top Plate
Only 1 Row LEDs Up with Bottom Plate
2 Rows LEDs Up with Bottom plate
Option
S2LDL1,2
S2RDL1,2
S2CDL1,2
S4L1,2
S4R1,2
S4C1,2
SX
On/Off Pull Chain on Left (bottom only)
On/Off Pull Chain on Right (bottom only)
On/Off Pull Chain on Center (bottom only)
4-Position Pull Chain on Left
4-Position Pull Chain on Right
4-Position Pull Chain on Center
No Switch
LCL3
LCR3
LCLHW3
LCRHW3
BD
Finish
3W LED Chart Light with Switch on Left
3W LED Chart Light with Switch on Right
3W LED Chart Light “Hard Wired” Left
3W LED Chart Light “Hard Wired” Right
Bed-Stop Switch
FW
AM
CC4
Flat White
(standard)
Anti-Microbial
White
Custom Color
Notes are on following page.
Healthcare Lighting • 888-834-5684 • www.healthcare-lighting.com
©2015-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting.
Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 08/31/16
HPW3LED
1
Project:
Archer LED
Type:
Patient Room Wall Light
Qty:
S P EC IF ICATI ONS
I n terior
ARCHER LED
Notes
1
2
3
4
Switching: S2 and S4 options are compatible with 120V only
For pull chain and pillow switch, specify “left” or “right” as viewed facing the head wall
3W LED chart light (option) always installed opposite end from pull chain or pillow switch
Custom color requires factory pricing
DIMENSIONS
BLOCKING BY
OTHERS
Fixture
HPW348 LED
4.22
HPW336 LED
NOMINAL
LENGTH
48”
36”
ACTUAL LENGTH
49.56”
37.56”
6.85
SIDE VIEW
CROSS SECTION
MOUNTING INFORMATION
•
•
•
•
Installation is made easy by the incorporation of a separate mounting plate (blocking by others).
After the plate is mounted to the wall the fixture can be quickly connected and hung.
It is the responsibility of the party installing the fixture to select appropriate fasteners that are suitable for the wall material and construction.
It is the responsibility of the person inst alling the light fixture to ensure that the materials, hardware and building structural members that are selected will support the light fixture(s) and that they meet
all applicable building and safety codes.
• Complete electrical connections according to the wiring diagram on ballast tray, following all applicable building codes and regulations.
HPW336 LED
HPW348 LED
FIXTURE MOUNTING STUDS
SEE INSTALLATION INSTRUCTIONS
3 "
8
615 16"
7"
6"
7"
7"
7"
613 16"
615 16"
1 "
HOLES FOR 4 BOLTS
OR #14 WOOD SCREWS
APPLIES TO ALL PLATES
29 16"
SIDE PROFILE
APPLIES TO ALL PLATES
245 8"
LINE VOLTAGE WIRE WAY
83 4"
81 4"
7"
613 16"
7"
LINE VOLTAGE WIRE WAY
LOW VOLTAGE WIRE WAY
467 16"
493 16"
185 8"
83 4"
347 16"
LOW VOLTAGE WIRE WAY
373 16"
Healthcare Lighting • 888-834-5684 • www.healthcare-lighting.com
©2015-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting.
Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 08/31/16
HPW3LED
2
Project:
Archer LED
Type:
Patient Room Wall Light
Qty:
S P EC IF ICATI ONS
I n terior
ARCHER LED
PERFORMANCE DATA
Lumen Output
Electrical Load
Lumen values are from photometric tests from an accredited laboratory. Data is considered to be representative of the configurations
shown, within the tolerances allowed within generally accepted industry tolerances. Actual performance may differ as a result of
end-user environment and application. Contact factory for performance data on any configurations not shown here
Light Switch Mode
top and bottom on
DIRECT: bottom on
INDIRECT: top on
For 4ft Fixture
Lumen Output
10860 lumens
5370 lumens
5490 lumens
Max CD
2370 candela
2260 candela
2370 candela
For 4ft Fixture
Light Switch Mode
Input Watts
top and bottom on
102 watts
DIRECT: bottom on
51 watts
INDIRECT: top on
51 watts
Actual performance may differ as a result of end-user environment or application
PHOTOMETRICS
DIRECT
Test Report: 501927
HPW348-120-LED352U2D-LV1R-LCL-GLR
Lumens: 4,496
Input Wattage: 63.5
Max. Candela: 2,062 H: 15º, V: 7.5º
180º 170º160º 150º
2,700
2,250
1,800
1,350
900
450
CD: 0
450
900
1,350
1,800
2,250
2,700
140º
130º
120º
110º
100º
90º
80º
70º
60º
50º
- 0º H
- 90º H
VA: 0º 10º 20º 30º
40º
Illuminance at a Distance
Center Beam
Height
Footcandle
4.0
125.4fc
8.0
31.4fc
12.0
13.9fc
16.0
7.8fc
20.0
5.0fc
INDIRECT
Test Report: 501929
HPW348-120-LED352U2D-LV1R-LCL-GLR
Lumens: 4,660.1
Input Wattage: 62.7
Max. Candela: 2,035 H: 10º, V: 157.5º
180º 170º160º 150º
1,700
1,417
1,133
850
567
283
CD: 0
283
567
850
1,133
1,417
1,700
140º
130º
120º
110º
100º
90º
80º
70º
60º
50º
- 0º H
- 90º H
VA: 0º 10º 20º 30º
40º
Illuminance at a Distance
Center Beam
Height
Footcandle
4.0
0fc
8.0
0fc
12.0
0fc
16.0
0fc
20.0
0fc
DIRECT & INDIRECT (All On)
Test Report: 501930
HPW348-120-LED352U2D-LV1R-LCL-GLR
Lumens: 9,077.8
Input Wattage: 125.7
Max. Candela: 2,062 H: 15º, V: 7.5º
180º 170º160º 150º 140º
1,700
1,417
1,133
850
567
283
CD: 0
283
567
850
1,133
1,417
1,700
130º
120º
110º
100º
90º
80º
70º
60º
50º
- 0º H
- 90º H
VA: 0º 10º 20º 30º
40º
Illuminance at a Distance
Center Beam
Height
Footcandle
4.0
125.4fc
8.0
31.4fc
12.0
13.9fc
16.0
7.8fc
20.0
5.0fc
Photometric data based on test results from an independent NIST traceable testing lab. IES data is available at www.healthcare-lighting.com. Always refer to our website for the latest IES file updates.
Healthcare Lighting • 888-834-5684 • www.healthcare-lighting.com
©2015-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting.
Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 08/31/16
HPW3LED
3