ks42 mf series panels - Kingspan Insulated Panels

advertisement
KS42 MF SERIES PANELS
CI-DS-01-KS42 MF
CI-PJ-01-KS42 MF
CI-PJ-02-KS42 MF
CI-PJ-03-KS42 MF
CI-PJ-04-KS42 MF
CI-PJ-05-KS42 MF
CI-PJ-06-KS42 MF
CI-PJ-07-KS42 MF
CI-PJ-08-KS42 MF
CI-PJ-09-KS42 MF
CI-BS-01-KS42 MF
CI-BS-02-KS42 MF
CI-BS-03-KS42 MF
CI-BS-04-KS42 MF
CI-OC-01-KS42 MF
CI-OC-02-KS42 MF
CI-OC-03-KS42 MF
CI-IC-01-KS42 MF
CI-IC-02-KS42 MF
CI-IP-01-KS42 MF
CI-IP-02-KS42 MF
C & I DISCLAIMER
KS42 MF AZTECO EXPANDED PANEL JOINT
KS42 MF AZTECO ENGAGED PANEL JOINT
KS42 MF GRANITSTONE EXP. PANEL JOINT
KS42 MF GRANITSTONE ENG. PANEL JOINT
KS42 MF MICRO-RIB EXPANDED PANEL JOINT
K342 MF MICRO-RIB ENGAGED PANEL JOINT
KS42 MF SHADOWLINE EXP. PANEL JOINT
KS42 MF SHADOWLINE ENG. PANEL JOINT
INTERMEDIATE SUPPORT
FLUSH BASE
BASE AT NOTCHED CONCRETE
OVERHANG WITH BASE SUPPORT
OVERHANG WITH BASE ANGLE
OUTSIDE CORNER WITH PROFILED TRIM
OUTSIDE CORNER WITH FLAT TRIM
OUTSIDE CORNER WITH MITER CUT
INSIDE CORNER WITH PROFILED TRIM
INSIDE CORNER WITH FLAT TRIM
BASE DETAIL - PARTITION
PARTITION TO ROOF
INDEX SHEET
KS42 MF SERIES PANELS
CI-FO-01-KS42 MF
CI-FO-02-KS42 MF
CI-FO-03-KS42 MF
CI-FO-04-KS42 MF
CI-FO-05-KS42 MF
CI-FO-06-KS42 MF
CI-FO-07-KS42 MF
CI-FO-08-KS42 MF
CI-FO-09-KS42 MF
CI-FO-10-KS42 MF
CI-FO-11-KS42 MF
CI-FO-12-KS42 MF
CI-SJ-01-KS42 MF
CI-PR-01-KS42 MF
CI-PR-02-KS42 MF
CI-TL-01-KS42 MF
CI-TL-02-KS42 MF
CI-TL-03-KS42 MF
CI-TL-04-KS42 MF
CI-TL-05-KS42 MF
CI-TL-06-KS42 MF
INDEX SHEET
F.O. TWO PIECE HEAD
F.O. HEAD WITH DRIP EDGE
F.O. TWO PIECE JAMB
F.O. ONE PIECE JAMB
F.O. ONE PIECE SILL
F.O. INTERIOR PARTITION
O.H. DOOR TWO PIECE HEAD
O.H. DOOR HEAD WITH DRIP EDGE
O.H. DOOR TWO PIECE JAMB
REMOVABLE PANEL HEAD
REMOVABLE PANEL SILL
REMOVABLE PANEL JAMB
STACK JOINT
PARAPET WITH FLUSH TRIM
PARAPET WITH PROFILED TRIM
TRIM END LAP
TRIM END LAP WITH HEM
TRIM END LAP WITH LAP STRIP
TRIM LAP AT F.O.
WALL PENETRATION
STRUCTURAL MEMBER PENETRATION
KS42 MF SERIES PANELS
DISCLAIMER:
THESE DETAILS ARE PROVIDED AS A GUIDELINE FOR PROPER PANEL AND ASSOCIATED
COMPONENT INSTALLATION, AND ARE BASED ON INDUSTRY ACCEPTED PRACTICES.
DUE TO THE FIBROUS NATURE OF MINERAL WOOL, ALL DETAILS ARE SHOWN WITH
SEALANT IN BOTH JOINTS.
FIRE PROTECTION OF STRUCTURAL SUPPORTS MAY BE REQUIRED (NOT BY KINGSPAN)
PLEASE CONSULT WITH KINGSPAN TECHNICAL SERVICES FOR ADDITIONAL DESIGN
AND INSTALLATION RECOMMENDATIONS WHEN USING MINERAL WOOL CORE PANELS
IN COLD STORAGE APPLICATIONS.
COMMERCIAL/INDUSTRIAL
DISCLAIMER
KS42 MF SERIES PANELS
SHADOWLINE
INTERIOR FACE
4" - 8"
KS42MF
EXTERIOR FACE
AZTECO
42" COVERAGE (1,067mm)
HORIZONTAL SUPPORT
MALE JOINT
FEMALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
CONTINUOUS
SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
NOTES:
1) FACTORY CAULKING OF PANEL JOINTS NOT AVAILABLE WITH SILICONE SEALANT.
2) JOINT SEALANT NOT REQUIRED FOR FIRE RATING.
KS42 MF AZTECO
EXPANDED
PANEL JOINT
KS42 MF SERIES PANELS
AZTECO EMBOSSING
HORIZONTAL SUPPORT
MALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
FEMALE JOINT
CONTINUOUS
SILICONE SEALANT
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
KS42 MF AZTECO
ENGAGED
PANEL JOINT
KS42 MF SERIES PANELS
SHADOWLINE
INTERIOR FACE
4" - 8"
KS42MF
EXTERIOR FACE
GRANITSTONE
42" COVERAGE (1,067mm)
HORIZONTAL SUPPORT
MALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
FEMALE JOINT
CONTINUOUS
SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
NOTES:
1) FACTORY CAULKING OF PANEL JOINTS NOT AVAILABLE WITH SILICONE SEALANT.
2) JOINT SEALANT NOT REQUIRED FOR FIRE RATING.
KS42 MF GRANITSTONE
EXPANDED
PANEL JOINT
KS42 MF SERIES PANELS
GRANITSTONE TEXTURE
FINISH
HORIZONTAL SUPPORT
MALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
FEMALE JOINT
CONTINUOUS
SILICONE SEALANT
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
KS42 MF GRANITSTONE
ENGAGED
PANEL JOINT
KS42 MF SERIES PANELS
SHADOWLINE
INTERIOR FACE
4" - 8"
KS42MF
EXTERIOR FACE
MICRO-RIB
42" COVERAGE (1,067mm)
HORIZONTAL SUPPORT
MALE JOINT
FEMALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
CONTINUOUS
SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
NOTES:
1) FACTORY CAULKING OF PANEL JOINTS NOT AVAILABLE WITH SILICONE SEALANT.
2) JOINT SEALANT NOT REQUIRED FOR FIRE RATING.
KS42 MF MICRO-RIB
EXPANDED
PANEL JOINT
KS42 MF SERIES PANELS
HORIZONTAL SUPPORT
MALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
FEMALE JOINT
CONTINUOUS
SILICONE SEALANT
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
KS42 MF MICRO-RIB
ENGAGED
PANEL JOINT
KS42 MF SERIES PANELS
SHADOWLINE
INTERIOR FACE
4" - 8"
KS42MF
EXTERIOR FACE
SHADOWLINE
42" COVERAGE (1,067mm)
HORIZONTAL SUPPORT
MALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
FEMALE JOINT
CONTINUOUS
SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
NOTES:
1) FACTORY CAULKING OF PANEL JOINTS NOT AVAILABLE WITH SILICONE SEALANT.
2) JOINT SEALANT NOT REQUIRED FOR FIRE RATING.
KS42 MF SHADOWLINE
EXPANDED
PANEL JOINT
KS42 MF SERIES PANELS
HORIZONTAL SUPPORT
MALE JOINT
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
FEMALE JOINT
CONTINUOUS
SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
WALL PANEL INSTALLATION DIRECTION
KS42 MF SHADOWLINE
ENGAGED
PANEL JOINT
KS42 MF SERIES PANELS
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
4"
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
INTERMEDIATE
SUPPORT
3
4"
KS42 MF SERIES PANELS
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
POP RIVETS
CONTINUOUS SILICONE SEALANT
BASE TRIM
BASE ANGLE W/ MIN. 3" VERT.
LEG FOR PANEL ATTACHMENT
(NOT BY KINGSPAN)
BASE FLASHING
CONTINUOUS SILICONE
SEALANT BELOW BASE
FLASHING
FASTENER TO CONCRETE
(NOT BY KINGSPAN)
SEALANT MARRIAGE BEAD TO
VERTICAL PANEL JOINT
NOTE: SEE DETAIL CI-TL-01-KS42 MF AND CI-TL-02-KS42 MF FOR TYPICAL
TRIM LAP INSTRUCTIONS
FLUSH BASE
KS42 MF SERIES PANELS
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
POP RIVETS
BASE ANGLE W/ MIN. 3" VERT.
LEG FOR PANEL ATTACHMENT
(NOT BY KINGSPAN)
112"
(TYP.)
BASE TRIM
BASE FLASHING
FASTENER TO CONCRETE
(NOT BY KINGSPAN)
CONTINUOUS SILICONE
SEALANT BELOW BASE
FLASHING
CONTINUOUS SILICONE SEALANT
NOTE: SEE DETAIL CI-TL-01-KS42 MF AND CI-TL-02-KS42 MF FOR TYPICAL
TRIM LAP INSTRUCTIONS
BASE AT NOTCHED
CONCRETE
KS42 MF SERIES PANELS
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
POP RIVETS
BASE SUPPORT W/ MIN. 3" VERT.
LEG FOR PANEL ATTACHMENT
(NOT BY KINGSPAN)
112"
(TYP.)
BASE TRIM
CONTINUOUS SILICONE SEALANT
FASTENER TO CONCRETE
(NOT BY KINGSPAN)
NOTE: SEE DETAIL CI-TL-01-KS42 MF AND CI-TL-02-KS42 MF FOR TYPICAL
TRIM LAP INSTRUCTIONS
OVERHANG WITH
BASE SUPPORT
KS42 MF SERIES PANELS
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
BASE ANGLE W/ MIN. 3" VERT.
LEG FOR PANEL ATTACHMENT
(NOT BY KINGSPAN)
POP RIVETS
112"
(TYP.)
BASE TRIM
SILICONE SEALANT
FASTENER TO CONCRETE
(NOT BY KINGSPAN)
NOTE: SEE DETAIL CI-TL-01-KS42 MF AND CI-TL-02-KS42 MF FOR TYPICAL
TRIM LAP INSTRUCTIONS
OVERHANG WITH
BASE ANGLE
KS42 MF SERIES PANELS
WILL VARY WITH
FIELD CONDITION
WILL VARY WITH
FIELD CONDITION
FIELD CUT
CONTINUOUS
SILICONE SEALANT
OUTSIDE CORNER TRIM
FILL ALL VOIDS WITH
MINERAL WOOL INSULATION
1
4" - 14 THROUGH FASTENERS
W/ 118" BONDED WASHER
(AS REQUIRED FOR WIND LOAD)
3
4"
PHIL. PAN HEAD
ATTACHMENT CLIP
(BY OTHERS)
INSIDE CORNER TRIM
POP RIVETS
CONTINUOUS
SILICONE SEALANT
HORIZONTAL SUPPORT
OUTSIDE CORNER
WITH PROFILED TRIM
KS42 MF SERIES PANELS
WILL VARY WITH
FIELD CONDITION
WILL VARY WITH
FIELD CONDITION
FIELD CUT
CONTINUOUS
SILICONE SEALANT
OUTSIDE CORNER TRIM
FILL ALL VOIDS WITH
MINERAL WOOL INSULATION
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER WITH
118" BONDED WASHER (AS
REQUIRED FOR WIND LOAD)
3
4"
PHIL. PAN HEAD
ATTACHMENT CLIP
(BY OTHERS)
INSIDE CORNER TRIM
POP RIVETS
CONTINUOUS
SILICONE SEALANT
HORIZONTAL SUPPORT
OUTSIDE CORNER
WITH FLAT TRIM
KS42 MF SERIES PANELS
WILL VARY WITH
FIELD CONDITION
WILL VARY WITH
FIELD CONDITION
FIELD CUT
CONTINUOUS
SILICONE SEALANT
FILL ALL VOIDS WITH
MINERAL WOOL INSULATION
OUTSIDE CORNER TRIM
POP RIVETS
CONTINUOUS
SILICONE SEALANT
3
MIN. 4"
4"
PHIL. PAN HEAD
EXPANSION FASTENER
ATTACHMENT CLIP
(BY OTHERS)
INSIDE CORNER TRIM
HORIZONTAL SUPPORT
NOTE: VERIFY WIND LOADS WITH KINGSPAN PRIOR TO USING EXPANSION FASTENERS
FOR PANEL ATTACHMENT
OUTSIDE CORNER
MITER CUT
KS42 MF SERIES PANELS
WILL VARY WITH
FIELD CONDITION
WILL VARY WITH
FIELD CONDITION
3
4"
FIELD CUT
PHIL. PAN HEAD
SILICONE SEALANT APPLIED
AT FASTENER LOCATIONS
CONTINUOUS
SILICONE SEALANT
OUTSIDE CORNER TRIM
FILL ALL VOIDS WITH
MINERAL WOOL INSULATION
CONTINUOUS
SILICONE SEALANT
POP RIVETS
INSIDE CORNER TRIM
HORIZONTAL SUPPORT
1
4" - 14 THROUGH FASTENERS
W/ 118" BONDED WASHER
(AS REQUIRED FOR WIND LOAD)
INSIDE CORNER
WITH PROFILED TRIM
KS42 MF SERIES PANELS
WILL VARY WITH
FIELD CONDITION
WILL VARY WITH
FIELD CONDITION
3
4"
FIELD CUT
PHIL. PAN HEAD
SILICONE SEALANT APPLIED
AT FASTENER LOCATIONS
CONTINUOUS
SILICONE SEALANT
OUTSIDE CORNER TRIM
FILL ALL VOIDS WITH
MINERAL WOOL INSULATION
CONTINUOUS
SILICONE SEALANT
POP RIVETS
INSIDE CORNER TRIM
HORIZONTAL SUPPORT
1
4" - 14 THROUGH FASTENERS
W/ 118" BONDED WASHER
(AS REQUIRED FOR WIND LOAD)
INSIDE CORNER
WITH FLAT TRIM
KS42 MF SERIES PANELS
CONTINUOUS SILICONE
SEALANT
3
4"
PHIL. PAN HEAD
16 GA. BASE CHANNEL
(NOT BY KINGSPAN)
SET CHANNEL IN
SILICONE SEALANT
BASE DETAIL PARTITION
CONTINUOUS SILICONE
SEALANT
CONCRETE FASTENER
(NOT BY KINGSPAN)
KS42 MF SERIES PANELS
112"
GAP
ROOF DECK
(NOT BY KINGSPAN)
FILL ALL VOIDS WITH
MINERAL FIBER INSULATION
3" X 6" 16 GA. GALV STEEL
CONTINUOUS DEFLECTION
ANGLE W/ 1 4"-14 HEX HEAD
FASTENER TO ROOF DECK
1
CONTINUOUS SILICONE
SEALANT
PARTITION TO ROOF
4"-14
HEX HEAD BOLT
KS42 MF SERIES PANELS
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
1
INTERIOR CAP TRIM
4"
- 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS
SILICONE SEALANT
POP RIVETS
EXTERIOR CAP TRIM
FRAMED OPENING
(NOT BY KINGSPAN)
FIELD DRILL 3 8" WEEP HOLES
TO ALIGN WITH PANEL JOINTS
DOOR/WINDOW FRAME
(NOT BY KINGSPAN)
EXPOSED SEALANT
(NOT BY KINGSPAN)
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
FRAMED OPENING
TWO-PIECE HEAD
KS42 MF SERIES PANELS
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS
SILICONE SEALANT
POP RIVETS
EXTERIOR CAP TRIM
FRAMED OPENING
(NOT BY KINGSPAN)
DOOR/WINDOW FRAME
(NOT BY KINGSPAN)
DRIP FLASHING
EXPOSED SEALANT
(NOT BY KINGSPAN)
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
FRAMED OPENING
HEAD W/ "DRIP EDGE"
KS42 MF SERIES PANELS
FRAMED OPENING
(NOT BY KINGSPAN)
DOOR/WINDOW FRAME
(NOT BY KINGSPAN)
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS SILICONE SEALANT
INTERIOR CAP TRIM
EXPOSED SEALANT
(NOT BY KINGSPAN)
POP RIVETS
CONTINUOUS SILICONE SEALANT
POP RIVETS
EXTERIOR CAP TRIM
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
FRAMED OPENING
TWO PIECE JAMB
KS42 MF SERIES PANELS
FRAMED OPENING
(NOT BY KINGSPAN)
1
DOOR/WINDOW FRAME
(NOT BY KINGSPAN)
4" - 14 "LOW PROFILE"
FASTENER (AS REQUIRED)
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS SILICONE SEALANT
EXPOSED SEALANT
(NOT BY KINGSPAN)
CONTINUOUS SILICONE SEALANT
POP RIVETS
CONTINUOUS SILICONE SEALANT
CAP TRIM
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
FRAMED OPENING
ONE PIECE JAMB
KS42 MF SERIES PANELS
EXPOSED SEALANT
(NOT BY KINGSPAN)
DOOR/WINDOW FRAME
(NOT BY KINGSPAN)
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
EXTERIOR CAP TRIM
CONTINUOUS SILICONE
SEALANT
POP RIVETS
1
4"
- 14 "LOW PROFILE"
THROUGH FASTENER
1
4" - 14 "LOW PROFILE"
FASTENER (AS REQUIRED)
FRAMED OPENING
(NOT BY KINGSPAN)
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
FRAMED OPENING
ONE PIECE SILL
KS42 MF SERIES PANELS
PAINTED CEE CHANNEL
(NOT BY KINGSPAN)
PHIL. PAN HEAD FASTENERS
CONTINUOUS SILICONE SEALANT
PAINTED CEE CHANNEL
(NOT BY KINGSPAN)
CONTINUOUS
SILICONE SEALANT
THROUGH BOLT AS
REQUIRED FOR ATTACHMENT
OF DOOR CASING
(NOT BY KINGSPAN)
DOOR CASING
(NOT BY KINGSPAN)
FRAMED OPENING
PARTITION
KS42 MF SERIES PANELS
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
1
2
INTERIOR CAP TRIM
4"
- 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS
SILICONE SEALANT
POP RIVETS
EXTERIOR CAP TRIM
3
FRAMED OPENING
(NOT BY KINGSPAN)
FIELD DRILL 3 8" WEEP HOLES
TO ALIGN WITH PANEL JOINTS
EXPOSED SEALANT
(NOT BY KINGSPAN)
FASTENER
(NOT BY KINGSPAN)
1
HEADER TRIM
(OPTIONAL)
TRIM INSTALLATION SEQUENCE:
1
HEADER TRIM (OPTIONAL) & ALL APPLICABLE SEALANTS
2
INTERIOR CAP TRIM & ALL APPLICABLE SEALANTS PRIOR TO
INSTALLING THE PANEL AND THROUGH FASTENERS
3
EXTERIOR CAP TRIM
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
OVERHEAD DOOR
TWO PIECE HEADER
KS42 MF SERIES PANELS
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS
SILICONE SEALANT
POP RIVETS
EXTERIOR CAP TRIM
DRIP FLASHING
3
FRAMED OPENING
(NOT BY KINGSPAN)
2
FASTENER
(NOT BY KINGSPAN)
1
EXPOSED SEALANT
(NOT BY KINGSPAN)
HEADER TRIM
(OPTIONAL)
TRIM INSTALLATION SEQUENCE:
1
HEADER TRIM (OPTIONAL) & ALL APPLICABLE SEALANTS
2
DRIP FLASHING & ALL APPLICABLE SEALANTS PRIOR TO
INSTALLING THE PANEL AND THROUGH FASTENERS
3
EXTERIOR CAP TRIM
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
OVERHEAD DOOR
HEAD W/ DRIP EDGE
KS42 MF SERIES PANELS
FASTENER
(NOT BY KINGSPAN)
FRAMED OPENING
(NOT BY KINGSPAN)
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
1
JAMB TRIM
(OPTIONAL)
CONTINUOUS SILICONE SEALANT
2
INTERIOR CAP TRIM
EXPOSED SEALANT
(NOT BY KINGSPAN)
POP RIVETS
CONTINUOUS SILICONE SEALANT
POP RIVETS
3
EXTERIOR CAP TRIM
TRIM INSTALLATION SEQUENCE:
1
JAMB TRIM (OPTIONAL) & ALL APPLICABLE SEALANTS
2
INTERIOR CAP TRIM & ALL APPLICABLE SEALANTS PRIOR TO
INSTALLING THE PANEL AND THROUGH FASTENERS
3
EXTERIOR CAP TRIM
NOTE: SEE DETAIL CI-TL-01-KS42 MF, CI-TL-02-KS42 MF, AND CI-TL-04-KS42 MF
FOR TYPICAL TRIM LAP INSTRUCTIONS
OVERHEAD DOOR
TWO-PIECE JAMB
KS42 MF SERIES PANELS
FIXED VERT. WALL
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
POP RIVETS
EXTERIOR CAP TRIM
DRIP FLASHING
EXTERIOR CAP TRIM
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
REMOVABLE VERT. WALL
PANEL
REMOVABLE PANEL
HEAD
CONTINUOUS
SILICONE SEALANT
KS42 MF SERIES PANELS
REMOVABLE VERT. WALL
PANEL
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
POP RIVETS
EXTERIOR CAP TRIM
DRIP FLASHING
EXTERIOR CAP TRIM
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
FIXED VERT. WALL
REMOVABLE PANEL
SILL
CONTINUOUS
SILICONE SEALANT
KS42 MF SERIES PANELS
1
4" - 14 "LOW PROFILE"
THROUGH FASTENER
CONTINUOUS SILICONE SEALANT
INTERIOR CAP TRIM
FIXED VERT. WALL
REMOVABLE VERT. WALL
PANEL
CONTINUOUS SILICONE SEALANT
POP RIVETS
EXTERIOR CAP TRIM
REMOVABLE PANEL
JAMB
KS42 MF SERIES PANELS
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
POP RIVETS
STACK TRIM
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
HORIZONTAL SUPPORT
STACK FLASHING
CONTINUOUS SILICONE
SEALANT BELOW STACK
FLASHING
CONTINUOUS SILICONE SEALANT W/
MARRIAGE BEAD TO VERTICAL
PANEL JOINT
STACK JOINT
KS42 MF SERIES PANELS
SEALANT MARRIAGE BEAD TO
VERTICAL PANEL JOINT
WRAP MEMBRANE
(NOT BY KINGSPAN)
PARAPET BLOCKING
(NOT BY KINGSPAN)
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
CONTINUOUS
SILICONE SEALANT
PARAPET CAP
1
4" - 14 "LOW PROFILE"
FASTENER
FASTENER TO PARAPET
BACKER (NOT BY KINGSPAN)
CONTINUOUS CLEAT
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
PARAPET
WITH FLUSH TRIM
MEMBRANE ROOF &
PARAPET BACKER
(NOT BY KINGSPAN)
KS42 MF SERIES PANELS
SEALANT MARRIAGE BEAD TO
VERTICAL PANEL JOINT
WRAP MEMBRANE
(NOT BY KINGSPAN)
12 GA. STAINLESS STEEL
HIDDEN FASTENER CLIP
(1 PER PANEL, PER SUPPORT)
SET CLIP IN SILICONE SEALANT
PARAPET BLOCKING
(NOT BY KINGSPAN)
CONTINUOUS
SILICONE SEALANT
PARAPET CAP
FASTENER TO PARAPET
BACKER (NOT BY KINGSPAN)
POP RIVET
1
4" - 14 HEX HEAD
FASTENERS WITHOUT WASHER
PARAPET
WITH PROFILED TRIM
PARAPET BACKER
(NOT BY KINGSPAN)
KS42 MF SERIES PANELS
3"
P
N.
MI LA
M
I
TR
(2) BEADS
SILICONE SEALANT
3"
N. AP
I
L
M
IM
TR
TRIM END LAP
KS42 MF SERIES PANELS
FIELD NOTCH HEM(S)
AS REQUIRED
(NOT BY KINGSPAN)
3"
N. AP
I
L
M
IM
TR
(2) BEADS
SILICONE SEALANT
3"
N. AP
I
L
M
IM
TR
TRIM LAP WITH HEM
KS42 MF SERIES PANELS
(2) BEADS
SILICONE SEALANT
8" LONG LAP STRIP
1 "
. 4
M
NO AP
G
TRIM END LAP WITH
LAP STRIP
KS42 MF SERIES PANELS
FIELD NOTCH AND OVERLAP
TRIMS, POP RIVET AND SEAL AS
NECESSARY (NOT BY KINGSPAN)
FIELD MITER AND OVERLAP
TRIMS, POP RIVET AS
NECESSARY (NOT BY KINGSPAN)
SEALANT END DAM
2
INTERIOR HEAD TRIM
WITH TABS BENT DOWN
M
RI
PT
CA
D
EA
M
RI
OR
EX
T
AP
H
AT
C
EXTERIOR CAP TRIM AT JAMB
R
IO
ER
T
IN
AD
HE
T
A
I
ER
T
5
EXTERIOR HEAD TRIM W/
FIELD DRILL 3 8
(NOT BY KINGSPAN)
1
INTERIOR JAMB TRIM
6
EXPOSED SEALANT
(NOT BY KINGSPAN)
3
SILL TRIM WITH TABS
BENT UP
RIM
S
AT
T
AP
RC
T
EX
4
EXTERIOR JAMB TRIM
FIELD CUT/NOTCH CAP
TRIM AT CORNERS TO
ALLOW FOR LAP
(NOT BY KINGSPAN)
ILL
IO
ER
FIELD CUT/NOTCH CAP
TRIM AT CORNERS TO
ALLOW FOR LAP
(NOT BY KINGSPAN)
TRIM LAP AT
FRAMED OPENING
FIELD MITER AND OVERLAP
TRIMS, POP RIVET AND SEAL AS
NECESSARY (NOT BY KINGSPAN)
TRIM INSTALLATION SEQUENCE:
1
INTERIOR JAMB TRIM
2
INTERIOR HEAD TRIM WITH TABS DOWN
3
SILL TRIM WITH TABS UP
4
EXTERIOR JAMB TRIM
5
EXTERIOR HEAD TRIM
6
EXTERIOR SEALANTS AS REQUIRED
KS42 MF SERIES PANELS
FIELD BENT TRIM W/
SEALANT & #12 HEX-HEAD
COLOR MATCH FASTENER
FILL ALL VOIDS WITH
MINERAL FIBER INSULATION
AROUND OPENING
STEEL TUBE
CUT TRIMS ON SITE
TO FIT
2" MIN.
LAP
TOP PIECE
INSTALL FIRESTOP CAULK
4800DX/3600EX MIN. THICKNESS
1
1
2" AROUND 0" - 4" ANNULAR
SPACE ON BOTH SURFACES
OF WALL
CONTINUOUS SILICONE
INSIDE JOINT ON WARM SIDE
BOTTOM PIECE
WALL PENETRATION
KS42 MF SERIES PANELS
FIELD BENT TRIM W/
SEALANT & #12 HEX-HEAD
COLOR MATCH FASTENER
FILL ALL VOIDS WITH
MINERAL FIBER INSULATION
AROUND OPENING
STEEL TUBE
CUT TRIMS ON SITE
TO FIT
2" MIN.
LAP
TOP PIECE
INSTALL FIRESTOP CAULK
4800DX/3600EX MIN. THICKNESS
1
1
2" AROUND 0" - 4" ANNULAR
SPACE ON BOTH SURFACES
OF WALL
CONTINUOUS SILICONE
INSIDE JOINT ON WARM SIDE
BOTTOM PIECE
STRUCTURAL MEMBER
PENETRATION
Related documents
Download