NAFCO National Aerospace Fasteners Corp. NSTL SERIES NL SERIES STUD NSTL Test Method NL SERIES STUD Non-rotational matting part BL Thread Engineering Data GRIP RANGE Max. Torque Unified Thread C Thread Size IL AIL # 6 -32 # 8 -32 #10 -32 1/4 -20 5/16-18 HOLE SIZE D Thread Size UNIFIED THREAD # 6 -32 # 8 -32 #10 -32 1/4-20 5/16-18 UNC UNC UNF UNC UNC PART NUMBER NSTL-632-80-500 NSTL-832-80-500 NSTL-1032-130-500 NSTL-420-165-625 NSTL-518-150-625 M4X0.7 M5X0.8 M6X1.0 M8X1.25 PART NUMBER NSTL-470-2.0-12 NSTL-580-3.3-12 NSTL-610-4.2-15 NSTL-8125-3.8-16 M4X0.7 M5X0.8 M6X1.0 M8X1.25 Unit: Inch GRIP RANGE Min. Max. .020 .080 .020 .080 .020 .130 .027 .165 .027 .150 IL ± . 020 .485 .485 .545 .670 .810 B Min. .380 .380 .405 .490 .660 Max. .400 .400 .425 .510 .710 C D AIL BL ± . 003 Max. .266 .266 .297 .391 .531 Ref. .360 .360 .380 .465 .600 Max. .560 .560 .610 .763 .748 .030 .030 .030 .030 .035 METRIC THREAD THREAD SIZE UNC UNC UNF UNC UNC 20 31 56 142 262 Metric Thread B THREAD SIZE Max. Torque* (Lb-In) HOLE SIZE +.004/-.000 .266 .266 .297 .391 .531 * ** Max. Torque* (N-m) 3.1 6.1 18.4 49.6 Max. Torque is the maximum recommended torque to be applied to the bolt (class 8.8/9.8), which will not cause the separation of the bolt and the Insert. These values are averages only- certain variations must be expected in actual application. NAFCO recommends that these values be used only as a guide. Unit: mm GRIP RANGE Min. Max. 0.50 2.00 0.50 3.30 0.70 4.20 0.70 3.80 IL ± 0 .50 12.32 13.84 17.02 20.57 B Min. 9.66 10.29 12.45 16.76 Max. 10.16 10.79 12.95 18.04 C D AIL BL ± 0 .08 0.76 0.76 0.76 0.89 Max. 6.75 7.60 10.00 13.50 Ref. 9.15 9.65 11.81 15.24 Max. 13.70 14.40 17.70 18.60 *Actual grip range can be affected by parent material and hole size, contact NAFCO for details. **Other sizes, threads and grip ranges are available on request. HOLE SIZE +0.10/-0.00 6.75 7.60 10.00 13.50 Fastener Specifications Material: Screw: Steel 10B21 or Equiv. per SAE J403 Insert: Steel 1008, 1010, or Equiv. per SAE J403 (Special Material and Plating also Available on Request) Finish: Blank - Zinc plate Yellow Chromate 02 - Zinc plate Colorless Chromate 12 - Zinc-Nickel plate Yellow Chromate 42 - Zinc-Nickel plate Colorless trivalent Chromate (Special Plating also Available on Request) Part Number Explanation Example: NSTL-580-3.3-12 N STL - 580 - 3.3 - 12 - 02 Plating code (ex. Zinc Plated Colorless Chromate) Stud Length Call out Grip Call Out Thread Call Out STUD-NL Series Nafco QS9000 ISO9001 TEL: 886-3-4508868 FAX: 886-3-4604183 http://www.nafco.com.tw e-mail: sales@ms1.nafco.com.tw QS9000 ISO9001 TEL: 886-3-4508868 FAX: 886-3-4604183 http://www.nafco.com.tw e-mail: sales@ms1.nafco.com.tw NSTL Test Method NL SERIES STUD Non-rotational matting part BL Thread Engineering Data GRIP RANGE Max. Torque Unified Thread C Thread Size IL AIL # 6 -32 # 8 -32 #10 -32 1/4 -20 5/16-18 HOLE SIZE D Thread Size UNIFIED THREAD # 6 -32 # 8 -32 #10 -32 1/4-20 5/16-18 UNC UNC UNF UNC UNC PART NUMBER NSTL-632-80-500 NSTL-832-80-500 NSTL-1032-130-500 NSTL-420-165-625 NSTL-518-150-625 M4X0.7 M5X0.8 M6X1.0 M8X1.25 PART NUMBER NSTL-470-2.0-12 NSTL-580-3.3-12 NSTL-610-4.2-15 NSTL-8125-3.8-16 M4X0.7 M5X0.8 M6X1.0 M8X1.25 Unit: Inch GRIP RANGE Min. Max. .020 .080 .020 .080 .020 .130 .027 .165 .027 .150 IL ± . 020 .485 .485 .545 .670 .810 B Min. .380 .380 .405 .490 .660 Max. .400 .400 .425 .510 .710 C D AIL BL ± . 003 Max. .266 .266 .297 .391 .531 Ref. .360 .360 .380 .465 .600 Max. .560 .560 .610 .763 .748 .030 .030 .030 .030 .035 METRIC THREAD THREAD SIZE UNC UNC UNF UNC UNC 20 31 56 142 262 Metric Thread B THREAD SIZE Max. Torque* (Lb-In) HOLE SIZE +.004/-.000 .266 .266 .297 .391 .531 * ** Max. Torque* (N-m) 3.1 6.1 18.4 49.6 Max. Torque is the maximum recommended torque to be applied to the bolt (class 8.8/9.8), which will not cause the separation of the bolt and the Insert. These values are averages only- certain variations must be expected in actual application. NAFCO recommends that these values be used only as a guide. Unit: mm GRIP RANGE Min. Max. 0.50 2.00 0.50 3.30 0.70 4.20 0.70 3.80 IL ± 0 .50 12.32 13.84 17.02 20.57 B Min. 9.66 10.29 12.45 16.76 Max. 10.16 10.79 12.95 18.04 C D AIL BL ± 0 .08 0.76 0.76 0.76 0.89 Max. 6.75 7.60 10.00 13.50 Ref. 9.15 9.65 11.81 15.24 Max. 13.70 14.40 17.70 18.60 *Actual grip range can be affected by parent material and hole size, contact NAFCO for details. **Other sizes, threads and grip ranges are available on request. HOLE SIZE +0.10/-0.00 6.75 7.60 10.00 13.50 Fastener Specifications Material: Screw: Steel 10B21 or Equiv. per SAE J403 Insert: Steel 1008, 1010, or Equiv. per SAE J403 (Special Material and Plating also Available on Request) Finish: Blank - Zinc plate Yellow Chromate 02 - Zinc plate Colorless Chromate 12 - Zinc-Nickel plate Yellow Chromate 42 - Zinc-Nickel plate Colorless trivalent Chromate (Special Plating also Available on Request) Part Number Explanation Example: NSTL-580-3.3-12 N STL - 580 - 3.3 - 12 - 02 Plating code (ex. Zinc Plated Colorless Chromate) Stud Length Call out Grip Call Out Thread Call Out STUD-NL Series Nafco QS9000 ISO9001 TEL: 886-3-4508868 FAX: 886-3-4604183 http://www.nafco.com.tw e-mail: sales@ms1.nafco.com.tw QS9000 ISO9001 TEL: 886-3-4508868 FAX: 886-3-4604183 http://www.nafco.com.tw e-mail: sales@ms1.nafco.com.tw