E-therm Product Information DL Brochure

advertisement

Products

5mm

The E-therm 5mm product has been designed as the economical choice of product in the E-therm range and can be installed in sheds, walls, roofs and even under floor applications. It is the thinnest and most compact of the E-therm products making it ideal for use in tight spaces or cavities. Installed R Values ranging up to R2.0 for walls, R2.9 for Tile Roofs, R2.8 for Metal

Roofs, R2.7 for floors.

6.5mm

The E-therm 6.5mm product is the all-round solution designed for walls, roofs, sheds and under floor applications while also achieving the BCA requirement for thermal break. High acoustic performance rounds off the list of features making the E-therm

6.5mm product the ideal choice for many applications. Installed

R Values ranging up to R2.0 for walls, R2.9 for Tile Roofs, R2.8 for Metal Roofs, R2.7 for floors.

> 4 in 1 solution - Thermal insulation; Vapour Barrier; Acoustic

Insulation; and meets BCA requirements for Thermal Break

8mm

The E-therm 8mm product is the highest rated product in the

E-therm range, achieving impressive thermal and acoustic performance. With some of the highest reflectivity and acoustic values on the market, while retaining effective cost savings, it also makes E-therm 8mm one of the premium products available. Installed R Values ranging up to R2.1 for walls, R3.0 for Tile Roofs, R2.9 for Metal Roofs, R2.8 for floors.

> 4 in 1 solution - Thermal insulation; Vapour Barrier; Acoustic

Insulation; and exceeds BCA requirements for Thermal Break

> Amongst the highest acoustic values on the market

*Please contact your supplier for specific R-Value details

Product Dimensions

> Roll sizes 1.35m x 22.25m (30m 2 )

> Overlap piece for full 30m 2 coverage

> All products available as ‘breathable’

for vapour permeable applications

Features Checklist

INSULATION PERFORMANCE

Radiant barrier

Conduction barrier

Moisture barrier

Draft barrier

Yes

Yes

Yes

Yes

Good in tropical- humid climates

Moisture resistant

Yes

Yes

Effective acoustic barrier Yes

E-therm™ has been independently tested by

Australian Hearing National Acoustic Laboratories, an accredited and recognised

Australian testing authority.

E-therm™ insulation on it’s own achieves a STC 12 giving up to 12dB sound reduction to help minimise rain, aircraft and traffic noise. This is one of the highest acoustic ratings amongst reflective insulation products.

RESISTANT TO

Most chemicals

Mould and fungus

Yes

Yes

Rodents

Dust entrapment

Yes

Yes

HEALTH AND SAFETY

Fibre free

Allergy free

Yes

Yes

APPLICATIONS

Roofs

Walls

Sub-floors

Yes

Yes

Yes

Anti glare

Formaldehyde free

Shed lining

Self supporting

ENVIRONMENT

Recyclable/Reusable

Made using recycled foam materials

In-house recycle facility

Yes

Yes

Yes

Foam contains no CFC’s or HCFC’s

Energy Efficient

Australian Made

Distributed by

Yes

Yes

Yes

Yes

(semi rigid)

Yes

Yes

Yes

refle

I N S U L A T I O N

Phone

1300 720 185

SA/NT Fax (08) 8284 1293 • VIC/TAS Fax (03) 9012 4286

Mobile 0428 147 258

Email info@reflexinsulation.com.au

www.reflexinsulation.com.au

The R-Values shown are for heat flow down and are Total R-Values for the building system

refle

I N S U L A T I O N

www.reflexinsulation.com.au

™ the quality solution without the compromise

> Safe

> Ecofriendly

>100% Australian

Product Benefits

Thermal

E-therm is a “4 in 1” solution replacing traditional foil sarking, bulk fibre and acoustic insulation while also acting as a thermal break with one easy application. With the innovative and superior foam technology that is incorporated in the product, E-therm will achieve the “Thermal Break” requirement set by the Building

Code of Australia when used on buildings with steel framework.

E-therm is made using high quality materials and incorporates a bimetallic highly reflective aluminium film that sandwiches a low conductive layer of low density closed cell polyethylene foam.

This foam has a very low rate of conduction effectively reducing the amount of heat transmission into the building.

E-therm works by reducing heat transfer in 3 ways:

1. Reflectivity: E-therm reflects up to 97% of radiant heat back to its source to ensure you are kept cool in summer and warm in winter. By re-radiating heat, E-therm keeps energy loss to a minimum, reducing heating and cooling costs.

2. Low Conduction: The specially developed foam reduces heat transfer through closed cell air pockets.

3. Low Convection: E-therm traps still air and reduces the event of convection occurring.

Acoustic

Whilst E-therm boasts great thermal performance in many applications the product also contributes to minimising the amount of noise transmitted through common building structures such as roofs, walls and floors. The acoustic performance is one of the highest amongst the reflective foil insulation products that are available.

E-therm has been independently tested with a very respectable

Standard Transmission Class rating of STC12. E-therm will effectively eliminate 12 decibels in any given application. This helps protect you against rain noise, aircraft noise, traffic noise and neighbourhood noise.

Applications

> Thermal Break

> Commercial Roofs

> Domestic Roofs

> Ceilings

> Walls

> Double Brick Cavity

> Floors

> Hospitals

> Schools

> Warehouses

> Factories

> Sheds & Barns

> Wineries

> Portable Buildings

> Animal Shelters

> Shopping Centres

> Aged Care Facilities

Environment

By choosing E-Therm you put the environment FIRST as

E-Therm’s energy efficient products greatly reduce cooling and heating costs. This helps achieve the 5 Star Energy Rating, lowering greenhouse gas emissions.

E-Therm is Australian made not transported from overseas, a further reduction in harmful greenhouse gas emissions.

E-therm also contributes to reducing it’s own carbon footprint, by utilizing an in house recycling facility, and incorporating up to

80% recycled foam content in the manufacture of the product.

E-therm is Greenstar and Basix compliant in that it meets

International ODP-EMI9 requirements. This means there are no ozone depleting substances used in either the manufacturing process or the composition of the actual product.

By choosing E-Therm you are maximizing both energy savings & environmental benefits for the whole life of the building, which will not only benefit the planet but also create long term energy cost saving solutions for you!

refle

I N S U L A T I O N

Health & Safety

E-therm is fibre-free, non-toxic and non-allergenic. This presents a clean, safe and effective alternative to more conventional types of insulation that can lose their effectiveness over time. Being fibre-free and non-itchy, E-therm is quick and easy to install and is rated ‘Extra Heavy Duty’ for maximum strength and durability.

E-therm also acts as a vapour barrier reducing the passage of moisture and dust particles into the roof and wall cavities.

E-therm has been tested to the latest Australian Insulation

Standard AS/NZS 4859.1 and is fully compliant with the Building

Code of Australia.

E-therm is also designed to help fire-proof your building, and is suitable for Bush Fire Prone Areas having been tested to AS/NZS 1530.2

Cost Savings

While E-therm offers effective reductions in cooling and heating costs, it also delivers further costs savings in product material.

When installing other similar products, in most cases you are required to overlap the product, causing a loss of around 3m 2 every roll. This means you need to purchase an extra 10% of product than the square metres actually required.

Now with E-Therm’s solution the overlap is provided for you, gone are the days of buying 30m 2 but only getting 27m 2 coverage. Using E-Therm’s unique overlap piece gives an extra 10% coverage on every roll, so when you buy 30m 2 of E-Therm you get 30m 2 coverage.

Overlap Piece

Anti-Glare Metallic Film

Microcellular Foam

Metallic Film

Greater coverage per roll means less rolls per job, less labour and less transport costs. This all adds up to further cost savings for you!

Download