Power Switching & Controls
For Business-Critical ContinuityTM
Edco CP-24 Series
Camera Power Surge Protector
CCTV
The Edco CP-24 surge protector is easily installed directly at and in series with a
camera's power terminal. The Edco CP-24 uses 2.1mm jacks to connect to the
cameras power adaptor and power feed. High-speed SAD technology clamps high
energy transients that could damage the CCTV equipment.
General Technical Specifications
Maximum Operating Voltage
36.8 VDC
Clamping Voltage
59.3 VDC
Operating Current
.5 A
Peak Pulse Power (10 x 1000 µs)
1500W
Peak Surge Current
25.6A
SPD Technology
Connection Type
Silicon Avalanche Diode (SAD)
2.1mm x 5.5mm Female/Male Power Jack
Operating Temperature
Dimensions (Inches [mm])
-40°C to +85°C
2.240 [56.9] L x .460 [11.7] W
Weight
0.6 oz
Warranty
1 year
Ordering Information
Attached in series with camera power wiring.
CP-24 (For 12 VDC, 24 VDC, 25 VAC Systems)
Features
Fits 2.1mm Camera Power Jack
Works for 12 VDC, 24 VDC and 24 VAC
camera power
High energy silicon avalanche
technology
Operating current .5 Amps
Combination camera power/video kit
available.
1 year warranty
Installation
See Note 1.
1. Disconnect the power wire at
camera and at the source.
2. Connect "protected" side of Edco
CP-24 to the camera side of the
wire and "unprotected" side of
the device to the power source
side of the wire.
3. Reconnect power source to camera.
Edco CP-24 Camera Power
Surge Protector
Notes:
1.The Edco CP-24 may be purchased in combination with the Edco CCTV-1 video
line surge protector. For both devices order the Edco CP-CCTV.
2.The Edco CP-24 shall be installed per the applicable requirements of the
National Electric Code, ANSI/NFPA 70.
Emerson Network Power.
The global leader in enabling
Business-Critical ContinuityTM.
AC Power
Embedded Computing
Infrastructure Management & Monitoring
Precision Cooling
Connectivity
Embedded Power
Outside Plant
Racks and Integrated Cabinets
DC Power
Industrial Power
Power Switching & Control
Services
Emerson Network Power Contact information
www.emersonnetworkpower.com/surge
Headquarters
Surge Protection
100 Emerson Parkway
Binghamton, New York 13905
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: contactsurge@emerson.com
IO-50182 12/12 Rev.0 Printed in USA
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power
logo are trademarks and service marks of Emerson Electric Co. ©2012 Emerson Electric Co.
Surge Protection
For Business-Critical ContinuityTM
Edco CCTV-1
Closed Circuit TV Camera Protection
The Edco CCTV-1 application is specifically designed for lightning protection on
closed circuit TV cameras. The protector is easily installed with standard type BNC
coax connectors. The Edco CCTV-1 offers low loss even at frequencies approaching
500 Mhz. This is important for error-free data communication applications.
General Technical Specifications
Operating Voltage
5 VDC
Clamping Voltage
90 VDC (Spark Over Voltage)
Operating Current
1A
Peak Surge Current
10 kA (8 x 20 µs)
Frequency Range
0 to 1 GHz
Insertion Loss
< 0.5 dB at 500 MHz
<1.0 dB at 900 MHz
SPD Technology
Gas Discharge Tube (GDT)
Connection Type
BNC, 75 Ohms
Operating Temperature
-40°C to +85°C
Dimensions (Inches)
0.6H x 0.6W x 2.0L
Weight
1 oz
Features
Automatic recovery
Low insertion loss
Easily installed
Shielded case
Miniature size
5 year warranty
Typical Installation
Camera
CCTV-1
Emerson Network Power.
The global leader in enabling
Business-Critical ContinuityTM.
AC Power
Embedded Computing
Outside Plant
Racks and Integrated Cabinets
Connectivity
Embedded Power
Power Switching & Control
Services
DC Power
Monitoring
Precision Cooling
Surge Protection
Emerson Network Power Contact information
Headquarters
Surge Protection
328 Water Street
Binghamton, NY 13901
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: contactsurge@emerson.com
IO-50121 2/09 Rev. 1 Printed in USA
www.emersonnetworkpower.com
650 SW 27th Avenue
Ocala, FL 34471
T: (352) 732-3029
T: (800) 648-4076
F: (352) 867-1237
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power
logo are trademarks and service marks of Emerson Electric Co. ©2009 Emerson Electric Co.