FULLY WELDED
BALL VALVES
2
PERFORMANCE
FROM START TO
FINISH
Ensuring the safety of the entire pipeline system requires the valves
for oil and gas applications to be able to meet the most challenging
demands.
The design is optimised for each specific field of application and complies
with the latest standards and regulations. BÖHMER-Ball Valves are a
guarantee for long lasting reliability.
Renowned oil and gas companies trust in our quality.
3
EXPERIENCE, EXPERTISE,
PERFORMANCE.
WE ARE BÖHMER!
We have been a reliable ball valve manufacturer since 1956. More than 300 highly
qualified employees and modern machinery are the components of our success.
The structure of our plant and equipment, as well as our production, which is based
on the most modern economic and ecological requirements, guarantee
our customers maximum performance, quality and cost-effectiveness.
Decades of research and development enable us to manufacture a
wide variety of ball valves for diverse applications. Thanks to our
modular design system, we can always react flexibly to market
needs. Needless to say, we offer special designs for individual
customer requirements.
Branch factory in Hattingen
Main factory in Sprockhövel
4
Branch factory in Kunshan, China
Branch factory in Karaganda, Kazakhstan
Today we are proud to have facilities located on 23,000 m² of
production and administration floor-space in our main factory and
13,500 m² in our branch factory in Hattingen.
Furthermore we are present outside of Europe with two production facilities.
In China we produce split body ball valves for the local market. Our plant in
Kazakhstan is delivering district heating ball valves to regional customers.
Our large warehousing capacity enables us to meet even short-term deadlines. Ontime deliveries are standard for us.
Our regular customers are demanding and therefore appreciate our first-class service. They
have relied on the quality and reliability of BÖHMER ball valves for decades. We are proud to be
recognized as one of the leading valve manufacturers.
5
THE BÖHMER
PRODUCT LINE
Our ball valves set standards because our products are designed for the most demanding conditions. The various applications for which our ball valves were designed require
maximum durability and performance.
Generally our ball valves can be used wherever gases, liquids and solids are
transported. It goes without saying that our ball valves fulfill all requirements
for certification and procedure approvals.
We can transport all media without difficulty up to the nominal size
DN1400 / 56”, even with pressures of up to 500 bar.
The standards that our ball valves now fulfill are the highest
on the market. But we go a step further. Our team of highly
qualified engineers and designers takes special care to
further develop our ball valves with maximum quality of
design and material as well as cost-effectiveness.
6
OIL; GAS AND PRODUCT
PI PE LI N E S
COMPRESSOR; MEASURING
AND REDUCTION STATIONS
GAS STORAGE
PLANTS AND VESSELS FOR THE OIL;
GAS AND PETROCHEMICAL INDUSTRY
LIQUID GAS
ON- AND OFFSHORE PLATFORMS
SHIPBUILDING
POWER STATIONS
DISTRICT HEATING / STEAM
SCRAPER LAUNCH AND
RECEIVING STATIONS
SPECIAL APPLICATIONS / TAILOR MADE
Certifications
DIN EN ISO 9001
API 6D/API 6DSS
DIN-DVGW
EN 13774
EAC
EN 14141
TA-Luft
ATEX 94/9/EG
BS 5351
Fire Safe
PED 97/23/EC
BAM
(structural component approvals)
Type approvals
Safety Shutoff Units (SAE)
(VdTÜV)
acc. to EN 14382
acc. to BS6755/API6FA and others
7
PRECISELY DESIGNED
AND PROVEN IN THE FIELD
Böhmer fully welded ball valves fullfil the
requirements of the most common national and
international standards.
8
9
BASIC DESIGN FEATURES
Seat Seal System
The Böhmer ball valves provide spring supported
seats as a standard. The seats are pressed against the
ball surface by the spring elements and ensure a tight
shut-off at low line pressure. In addition the sealing
effect is assisted by the pressure in line. So the total
sealing force is the sum of the spring force and the
force resulting from the pressure which increases
proportionally with the line pressure. Depending on
applications and customer requirements the below
mentioned sealing systems can be delivered:
• soft seated
• primary metal seated / secondary soft seated
• metal to metal seated
Stem Sealing
The sealing of the stem to the atmosphere is achieved
by three independent sealing systems. The stem
sealing design ensures the anti-blow-out function, too.
Therefore, the three stem sealings are easily replaceable under full line pressure in open or closed position.
6
4
Trunnion Mounted Ball
The standard design of Böhmer ball valves provides a
trunnion mounted ball for the nominal sizes 3 inch and
higher. The maintenance-free bearings for stem and
trunnion are self-lubricating, thus ensuring a lower
torque especially for high pressure ratings.
Fire Protection
The design ensures the fire safe requirements in
accordance with the international standards as API 6FA,
API 607, BS 6755 P 2 and ISO 10497.
Anti-Static Device
The ball valve design includes an electric conductive
connection between the internal parts of the ball valve
and the body, providing the anti-static function.
Emergency Sealing
As an option, Böhmer ball valves can be delivered with an
additional emergency sealant injection for the seat-rings
and stem sealing.
3
7
6
Double Block and Bleed
The cavity can be relieved via vent or drain connections at the cavity.
The upstream and downstream seat rings ensure the tight shut off to
the cavity in closed position (optional in open position as well). This
enables the verification of the tightness of the ball valve under full
working pressure.
5
2
Single-Piston-Effect (Self-relieving Seat Design)
This seat system is designed to automatically vent any excessive
build-up pressure in the body cavity. The floating seat design allows
for relieving the overpressure into the pipeline.
1
➀ Body
➁ Ball
➂ Stem
➃ Trunnion
➄ Seat-rings
➅ Self lubricating bearings
➆ Anti blow-out device
of the stem
➇ Top mounting flange for
gearboxes or actuators
➈ Emergency sealant injection
as an option
Double-Piston-Effect (Bi-directional Seating System)
With this design the seat rings tighten independently of the actual
pressure relations. A redundant sealing system is created. Self
relieving of the cavity does not happen in closed position (optional
in open position as well).
9
Ball Valve with Flange or Weld Ends
DN 25 - 400, ANSI Class 150 | PN 16*
Standard Materials:
Nom. size
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Diameter
DN
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
Seat Rings: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Face to face dimensions
Di
L(RF)
L(RTJ)
L(PN*)
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
mm
kg
kg
25
50
80
100
150
200
250
300
350
400
1
2
3
4
6
8
10
12
14
16
25
51
78
102
152
203
254
305
336
387
127
178
203
229
394
457
533
600
686
762
191
216
241
406
470
546
622
699
775
150
180
190
350
400
650
750
850
950
216
241
283
305
400
460
600
700
800
900
35
63
100
113
166
201
283
325
353
435
27
45
70
86
157
192
249
313
340
406
4.5
12
28
45
85
130
295
505
680
850
2
6
20
32
59
90
265
450
610
750
* DIN face-to-face dimensions are deliverable as well.
10
Weight
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
DN 450 - 1400, ANSI Class 150 | PN 16*
Standard Materials:
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; P250 GH
Ball: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
Seat Rings: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Nom. size
Diameter
DN
Di
L(RF)
Face to face dimensions
L(RTJ)
L(PN*)
Weight
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
mm
kg
kg
450
500
550
600
700
750
800
900
1000
1050
1200
1400
18
20
22
24
28
30
32
36
40
42
48
56
438
489
540
591
686
736
781
876
978
1020
1166
1360
864
914
1016
1067
1245
1295
1372
1524
1948
2015
2145
2360
876
927
1028,7
1080
-
1050
1150
1350
1550
-
1000
1090
1130
1150
1295
1346
1397
1499
2010
2085
2210
2445
470
512
649
688
742
785
852
912
1110
1163
1322
1530
450
488
551
594
661
711
774
830
978
1026
1192
1348
1180
1660
2100
2500
3100
3680
4830
6650
8900
9900
16000
20500
1050
1400
1800
2300
2800
3250
4400
6050
8250
9150
14900
19300
* DIN face-to-face dimensions are deliverable as well.
The information given is subject to change and potential clerical errors.
11
Ball Valve with Flange or Weld Ends
DN 25 - 400, ANSI Class 300 | PN 25/40*
Standard Materials:
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
Seat Rings: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Nom. size
Diameter
DN
Di
L(RF)
Face to face dimensions
L(RTJ)
L(PN*)
L(WE)
H1
H2
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
mm
kg
kg
25
50
80
100
150
200
250
300
350
400
1
2
3
4
6
8
10
12
14
16
25
51
78
102
152
203
254
305
336
387
140
216
283
305
403
502
568
648
762
838
232
298
321
419
518
584
664
778
854
150
180
190
350
400
650
750
850
950
216
241
283
305
400
460
600
700
800
900
35
63
100
113
198
233
283
325
353
435
27
45
95
108
165
201
249
313
340
406
4,5
12
28
45
89
135
310
520
710
890
2
6
20
32
59
90
265
450
610
750
* DIN face-to-face dimensions are deliverable as well.
12
Weight
Flange
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
DN 450 - 1400, ANSI Class 300 | PN 25/40*
Standard Materials:
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Body: TSTE 355N/P355 NL1; ASTM A350 LF2
Ball: ASTM A350 LF2; ASTM A105; ASTM A182;
ASTM A694; ENP or hard chrome;
stainless steel on request
Seat Rings: ASTM A350 LF2; ASTM A105;
ENP or hard chrome; stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Nom. size
Diameter
DN
Di
L(RF)
Face to face dimensions
L(RTJ)
L(PN*)
Weight
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
mm
kg
kg
450
500
550
600
700
750
800
900
1000
1050
1200
1400
18
20
22
24
28
30
32
36
40
42
48
56
438
489
540
591
686
736
781
876
978
1020
1166
1360
914
991
1092
1143
1346
1397
1524
1727
2048
2112
2257
2470
930
1010
1114
1165
1372
1422
1553
1756
-
1050
1150
1350
1550
-
1000
1090
1130
1150
1295
1346
1397
1499
2010
2085
2210
2445
470
512
649
688
742
785
852
912
1110
1163
1322
1530
450
488
551
594
661
711
774
830
978
1026
1192
1348
1210
1710
2100
2580
3190
3800
4950
6900
9200
10700
16600
21300
1050
1450
1850
2300
2840
3350
4500
6200
8400
9800
15500
19700
* DIN face-to-face dimensions are deliverable as well.
The information given is subject to change and potential clerical errors.
13
Ball Valve with Flange or Weld Ends
DN 25 - 400, ANSI Class 600 | PN 100*
Standard Materials:
Nom. size
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
DN
Diameter
Body: TSTE 355N/P355 NL1; ASTM A350 LF2
Ball: ASTM A350 LF2; ASTM A694; ENP or hard chrome; stainless steel on request
Seat Rings: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Face to face dimensions
Di
L(RF)
L(RTJ)
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
kg
kg
25
50
80
100
150
200
250
300
350
400
1
2
3
4
6
8
10
12
14
16
25
51
78
102
152
203
254
305
336
387
216
292
356
432
559
660
787
838
889
991
216
295
359
435
562
663
791
841
892
994
216
292
356
432
559
660
787
838
889
991
55
78
160
192
228
295
343
403
451
492,5
29
61
116
135
178
224
275
320
363
400
6
17
41
72
157
300
455
690
980
1310
3
10
32
56
115
225
365
590
830
1080
* DIN face-to-face dimensions are deliverable as well.
14
Weight
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
DN 450 - 1400, ANSI Class 600 | PN 100*
Standard Materials:
Body: TSTE 355N/P355 NL1; ASTMA 350 LF2; ASTM A694
Ball: ASTM A350 LF2; ASTM A694;
ENP or hard chrome; stainless steel on request
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Nom. size
Diameter
DN
Di
Seat Rings: ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; HNBR
Face to face dimensions
L(RF)
L(RTJ)
Weight
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
kg
kg
450
500
550
600
700
750
800
900
1000
1050
1200
1400
18
20
22
24
28
30
32
36
40
42
48
56
438
489
540
591
686
736
781
876
978
1020
1166
1360
1092
1194
1295
1397
1549
1651
1778
2083
2165
2240
2385
2710
1095
1200
1305
1407
1562
1664
1794
2099
2194
2269
2414
2739
1030
1090
1130
1245
1295
1346
1397
1499
2010
2085
2210
2445
548
603,5
649
688
742
785
852
912
1110
1163
1322
1530
458
504
551
594
661
711
774
830
978
1026
1192
1348
1770
2210
2720
3400
4580
5750
7000
8800
10600
11700
18900
26800
1490
1830
2250
2950
3850
4890
6000
7500
9300
10400
16800
23800
* DIN face-to-face dimensions are deliverable as well.
The information given is subject to change and potential clerical errors.
15
Ball Valve with Flange or Weld Ends
DN 25 - 400, ANSI Class 900 | PN 160*
Standard Materials:
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A694
Ball: ASTM A350 LF2; ASTM A182; ASTM A694;
ENP or hard chrome; stainless steel on request
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Seat Rings: ASTM A350 LF2; ASTM A694; ASTM A182;
ENP or hard chrome; stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Nom. size
Diameter
DN
Di
Face to face dimensions
L(RF)
L(RTJ)
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
kg
kg
25
50
80
100
150
200
250
300
350
400
1
2
3
4
6
8
10
12
14
16
25
51
78
102
152
203
254
305
324
375
216
368
381
457
610
737
838
965
1029
1130
216
372
384
460
613
740
841
968
1038
1140
216
292
356
432
559
660
787
838
889
991
55
78
160
192
228
295
343
413
461
505
29
61
116
135
178
224
275
330
373
412,5
7
23
49
83
185
395
620
920
1280
1620
3
10
32
56
115
230
405
670
920
1210
* DIN face-to-face dimensions are deliverable as well.
16
Weight
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
DN 450 - 1200, ANSI Class 900 | PN 160*
Standard Materials:
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A694
Ball: ASTM A350 LF2; ASTM A182; ASTM A694;
ENP or hard chrome; stainless steel on request
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Seat Rings: ASTM A350 LF2; ASTM A694; ASTM A182;
ENP or hard chrome; stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; HNBR
Nom. size
Diameter
DN
Di
Face to face dimensions
L(RF)
L(RTJ)
Weight
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
kg
kg
450
500
550
600
700
750
800
900
1000
1050
1200
18
20
22
24
28
30
32
36
40
42
48
425
473
524
572
667
714
762
857
956
1006
1149
1219
1321
1422
1549
1549
1651
1778
2083
2225
2285
2460
1232
1334
1435
1568
1562
1664
1794
2099
2254
2314
2489
1030
1190
1130
1295
1359
1422
1486
1625
2010
2085
2210
563
621,5
671
708
772
820
887
945
1120
1187
1380
471
519
566
615
685
740
805
865
995
1055
1215
2100
2680
3420
4290
6100
7800
9750
13900
17800
19600
28500
1650
2040
2750
3320
4950
6500
7800
10400
14700
16300
24500
* DIN face-to-face dimensions are deliverable as well.
The information given is subject to change and potential clerical errors.
17
Ball Valve with Flange or Weld Ends
DN 25 - 900, ANSI Class 1500 / PN 250
Standard Materials:
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A694
Ball: ASTM A350 LF2; ASTM A182; ASTM A694;
ENP or hard chrome; stainless steel on request
Nom. size
DN
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
18
Diameter
Seat Rings: ASTM A350 LF2; ASTM A694; ASTM A182;
ENP or hard chrome; stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; PTFE; PTFE-filled; HNBR
Face to face dimensions
Weight
Di
L(RF)
L(RTJ)
L(WE)
H1
H2
Flange
Weld Ends
mm
inch
mm
mm
mm
mm
mm
mm
kg
kg
25
50
80
100
150
200
250
300
350
400
450
500
600
700
750
800
900
1
2
3
4
6
8
10
12
14
16
18
20
24
28
30
32
36
25
51
78
102
146
194
241
289
318
362
406
454
546
641
686
730
819
254
368
470
546
705
832
991
1130
1257
1384
1537
1664
1950
-
257
372
473
549
711
841
1000
1146
1276
1407
1559
1686
1972
1990
-
254
368
410
470
580
710
820
940
1075
1200
1254
1295
1390
1497
1575
1610
1770
60
85
175
212
253
330
388
463
527
575
533
743
849
1001
1078
1120
1235
35
70
131
155
203
254
310
382
433
482,5
474
612
753
859
910
965
1080
21
35
73
126
255
625
845
1430
1900
2400
3100
3900
5600
7900
10000
12800
17400
13
18
48
88
165
410
650
1120
1430
1750
2100
2850
4500
6600
8500
11000
15000
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
DN 25 - 300, ANSI Class 2500 / PN 420
Standard Materials:
Body: TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A694
Ball: ASTM A350 LF2; ASTM A182; ASTM A694;
ENP or hard chrome; stainless steel on request
For deviating operating conditions please
send us a written request stating the fluids, as
well as the pressure and temperature range.
The materials which are mentioned in the
list are the Böhmer standard materials. They
comply with the most common national and
international standards.
Other materials, which may be necessary
due to special applications / conditions
(such as corrosion / abrasion as well as
temperature etc.) or customers´ demands
are deliverable on request.
Seat Rings: ASTM A350 LF2; ASTM A694; ASTM A182;
ENP or hard chrome; stainless steel on request
O-Rings: FPM; EPDM; NBR; HNBR
Seat Insert: FPM; HNBR
Nom. size
Diameter
DN
Di
Face to face dimensions
L(RF)
L(RTJ)
L(WE)
H1
H2
Flange
Weld Ends
mm
mm
kg
kg
105
155
180
234
290
345
415
37
82
175
340
770
1250
2000
2700
20
36
80
185
380
720
1050
1400
mm
inch
mm
mm
mm
mm
25
50
80
100
150
200
250
300
1
2
3
4
6
8
10
12
25
42
62
87
131
179
223
265
254
451
578
673
914
1022
1270
1422
257
454
584
683
927
1038
1292
1445
254
368
410
490
610
870
995
1145
Weight
145
195
232
285
363
415
498
The information given is subject to change and potential clerical errors.
19
ACTUATORS FOR
BÖHMER BALL VALVES
Lever
Gear Unit
Electric
actuator
Hydraulic
actuator
Pneumatic
actuator
Ball valves with gear units
An economical solution for actuating large ball valves.
Pneumatic, hydraulic and electric
ball valve actuators
BÖHMER ball valves can be combined with actuators
made by all established actuator manufacturers. We
look forward to receiving your technical inquiries.
The actuating torque is defined by the range of
application, the operating conditions and the design of
the ball valve. Our technical engineers will be at your
service in order to select the best suitable actuator for
your ball valve.
20
OPTIONAL EQUIPMENT
Emergency sealing injection
Stem extension
Extended lines for drain, vent and
emergency sealing injection
Bypass directly at the valve
Locking device
Underground installation
Other design features on request
Our product range
includes more than
100.000 different kinds
of ball valves.
21
BÖHMER BALL VALVES
IN OPERATION
We keep in step with time!
Thanks to our comprehensive product line, we are already able to fulfill almost
every customer demand.
But we do not rest on our laurels!
In order to be able to satisfy all customers’ wishes in the future, our
highly qualified engineers and designers take meticulous care
to develop the next generations of ball valves. As a result,
we develop innovative solutions which are successful
in fields such as district heating, the gas industry,
pipeline construction, hydraulics, pneumatics, plant
engineering and construction, petrochemicals
and subsea applications.
District heating
Oil, gas, petrochemicals
22
Shipbuilding
Power plants
As one of the world’s leading manufacturers of ball valves, we are
always conscious of our responsibilities to our customers.
Now and in the future, the name BÖHMER will continue to be a
distinguished synonym for our comprehensive promise to perform.
BÖHMER
OUR EXPERIENCE – YOUR SAFETY
23
Gedulderweg 95
45549 Sprockhövel / Germany
Phone: +49 2324 7001-0
Fax:
+49 2324 7001-79
E-Mail:boehmer@boehmer.de
www.boehmer.de
Version: VV2.2
24