Works when you do
GeoMax General Catalogue
GeoMax
About Us
At GeoMax we provide a
group with strong market
At GeoMax, we concentrate
comprehensive portfolio
positions within measurement
on providing you with the
of integrated solutions by
technologies, grants GeoMax
quality and functionality
developing, manufacturing
access to state of the art
you need in your daily work.
and distributing quality
development and production
Removing the frills enables us
construction and surveying
facilities in Europe, America
to deliver products that “work
instruments and software.
and Asia. Our technology
when you do” – independent
We address professional as
is supported by a broad
of weather, location and
well as occasional users with
sales and service network
task. You get a price-to-
our easy-to-use, yet highly
covering all continents and
performance ratio which
productive total stations, GPS/
over 100 branches. Through
you need to succeed in your
GNSS instruments, software,
this continually growing
tough business environment.
lasers, optical and digital
distribution and service
levels and accessories.
network, our products
are available worldwide
Being part of the Hexagon
delivering outstanding
Group, a global technology
price-performance ratio.
GeoMax
GeoMax Total Stations
4
GeoMax Digital Level
Zoom80 Series
6
ZDL700 Series
Zoom35 Pro Series
10
37
Zoom30 Pro Series
12
GeoMax Automatic Level
Zoom20 Pro Series
14
ZAL300 Series
38
Zipp20 - Open WinCE® Series
16
ZAL100 Series
39
Zipp10 Pro Series
18
GeoMax GNSS
20
ZEL400 Series
40
Zenith25 Pro Series
22
ZLT300/200 Series
41
Zenith10 & 20 Series
24
Zone50 Series
42
GeoMax Dataloggers
28
GeoMax Software
44
PS336 Series
30
GGO – GeoMax Geo Office
46
Z710 for X PAD Android
32
GeoMax FieldGenius Premium
48
GeoMax Laser Rotator
•
GeoMax Locators
EZiTEX Signal Transmitter
34
EZiCAT Series
35
GeoMax Layout Pro
49
X·PAD Survey & Construction
50
X·PAD Android
51
GeoMax Accessories
52
GeoMax Quality Management
58
GeoMax Digital Theodolite
Zipp02
36
GeoMax Total Stations
Zoom80 Series
Zoom80R robotic and Zoom80S servo are technologically advanced
motorised total stations that scout, track, and aim reflectors fully
automatically.
Zoom35 Pro Series
With non-prism measurements of 1,000 m and its 1” angular accuracy
models, the Zoom35 Pro opens a new class of total stations for all those
requiring highest performance and accuracy on all levels.
Zoom30 Pro Series
The Zoom30 Pro brings all the functionality you expect from a total station
right at your fingertips. A total station for all those, demanding highest
performance and comfort that “works when you do”.
Zoom20 Pro Series
The Zoom20 Pro includes an environmentally protected USB port that
allows fast, simple and dependable data transfer between the instrument
and your PC, or even to other total stations.
Zipp20 - Open WinCE® Series
Featuring GeoMax FieldGenius, X·PAD, Carlson SurvCE or any localised field
software, the Zipp20 allows you to work the way that best fits your needs.
Zipp10 Pro Series
The Zipp10 provides a choice of angular accuracies and distance
measurement technology to suit your budget.
4
GeoMax Total Station
Zoom80 Series
With this motorised total station you have a lot of comfort and all the advantages of one-man
surveying. The advanced positioning technology ensures that it "works when you do”.
SCOUT360
Scans the entire working area
within seconds and quickly
finds the point you need
positioned. All measurement
tasks can therefore be
performed by one person.
TRACK360
AIM360
Provides continuous tracking
The telescope is perfectly
of targets. Once locked onto
aimed at any prism, without
a prism, the instrument will
needing to look through the
remain targeted exactly
telescope. Measurements are
on the moving prism.
performed automatically with
constant and repeatable
results.
6
accXess™ EDM technology
GeoMax’s accXess EDM
technology provides
class-leading reflectorless
measurements up to 1,000 m.
The extra small laser footprint
and sophisticated signal
processing technology,
ensures you maximum
accuracy, regardless of the
distance or conditions.
GeoMax Total Station
Zoom80 Series
Robotic surveying
Imagine an instrument that
does the majority of the work
for you, allowing you to survey
on your own. There is no need
for assistance, it is quick to
set up and has many easy-touse functionalities, simplifying
the entire process even more.
The GeoMax Zoom80R models
provide everything you ever
desired in your daily work. Wide
angle search technology quickly
locates the survey pole and
once positioned, it continues to
follow the prism as you move.
Automated Surveying
All Zoom80 total stations
are equipped with target
recognition technology, for
automated centring on prisms.
The total station needs only
to face the prism in order
for precise targeting and
NavLight
The telescope comes equipped
with NavLight, a practical
alignment aid for speeding up
staking-out work. The flashing
red and yellow lights guide the
rodman quickly and exactly
into the line of sight.
position measurement to
automatically be performed
by the instrument. With
Automated Surveying, you
are much more productive,
since each measurement can
be completed in only a few
seconds.
GeoMax Zoom80S (Servo)
5”, 2”, 1”
AIM360, TRACK360
GeoMax Zoom80R (Robotic)
5”, 2”, 1”
Technical Data
Accuracy (ISO 17123-3)
5 ”, 2 ”, 1 ”
Prism (range, accuracy)
3,500 m, 1 mm + 1.5 ppm
Prism, long-range (range, accuracy)
10,000 m, 5 mm + 2 ppm
Non-prism (range, accuracy)
1,000 m, 2 mm + 2 ppm*
SCOUT360 range 300 m, typical search time 5 – 10 sec
TRACK360 range (round / 360° prism) 800 / 600 m
AIM360 range (round / 360° prism) 1’000 / 800 m
* > 500 m: 4 mm + 2 ppm
8
AIM360, TRACK360, SCOUT360
GeoMax PS336
3.5” Full-VGA Quadra-Clear™
technology colour- & touchscreen,
Windows® Embedded Handheld 6.5,
29 illuminated keys
Powerful XSite software
Xsite software, together with a
complete range of applications,
cover the requirements for
all measurement tasks. From
simple measuring to complex
road stake-outs, you can be
certain that GeoMax “works
when you do”.
Standard applications
•
Setup
•
Survey
•
Stake-out
•
CoGo routines
PS336 controller
The PS336 controller is a high
performance fully rugged
handheld for use even in harsh
conditions.
The featured Windows®
Embedded Handheld 6.5
provides an open system for
any compatible software, such
as GeoMax FieldGenius, X·PAD
or Carlson SurvCE.
Optional applications
•
Volume
•
Reference line
•
Area division
•
Hidden point
•
Sets of angles
•
Road
•
Traverse
•
Face scan
•
DTM Stake-out
•
Cross section
•
Tunnel
•
Monitoring
•
Traverse adjust
9
GeoMax Total Station
Zoom35 Pro Series
With non-prism measurements of 1,000 m and 1” angle accuracy, the new Zoom35 Pro opens a new class of
total stations for all those requiring highest performance on every levels.
Superior accXess10 EDM
Easy connectivity
With the proven accXess10
The GeoMax Zoom35 Pro
technology, the Zoom35 Pro
manual total station includes
features an intelligent distance
an environmentally protected
measurement engine designed
USB port, internal Bluetooth®
for outstanding speed and
and a cable connection port
highest accuracy even on
that allow for fast, simple
extremely long ranges. This
and dependable data transfer
means a wider operational
between the instrument and
coverage and significant less
your PC or handheld controller
time lost with switching set
using easy to connect Plug and
ups.
Play
Colour touch screen
The extra large 3.5” colour
touch screen with Q-VGA
display provides for brilliant
readability even in strong
sunlight. Together with an
extra large high-resolution
display the easy-to-use
graphical interface makes
regular tasks such as
stake-outs easier and more
productive than ever before.
technology.
Technical Data
Hz, V Standard deviation (ISO 17123-3)
Compensator system
Measuring range with prism Accuracy on reflector (Fine/Tracking)
Reflectorless range accXess10
Accuracy reflectorless Communication
1 ”, 2 ”, 3 ”, 5 ”
Quadruple-axis compensation
10,000 m
2 mm + 2 ppm / 3 mm + 2 ppm
>1,000 m
2 mm + 2 ppm (>500 m 4 mm + 2 ppm)
USB, Bluetooth, USB Host, RS232
10
GeoMax Zoom35 Pro accXess10
Distance measurement to
reflector and 1,000 m reflectorless
measurement
Powerful apps
Every Zoom35 Pro series
instrument comes with a
complete range of powerful
applications. From survey
to stake-outs to CoGo and
volume calculations, the
Zoom35 Pro has an app
to get the job done.
•
Survey
•
Set-up with resection
•
Set out
•
Area 3D & volume
•
Remote elevation
•
Construction
•
Reference element
•
CoGo routines
•
Missing line measurement
•
Two Prism Offsets
•
Road
GeoMax Total Station
Zoom30 Pro Series
The Zoom30 Pro has all the functionality you expect from a total station right at your fingertips. A total station for all those, demanding high performance and ease that “works when you do”.
Easy connectivity
Colour touch screen
Highest functionality
The GeoMax Zoom30 Pro
The extra large 3.5” colour
The Zoom30 Pro combines
manual total station includes
touch screen with Q-VGA
faster stake-outs with
an environmentally protected
display provides brilliant
NavLight™ and outstanding
USB port, internal Bluetooth
readability even in strong
non-prism distance
and a cable connection port
sunlight. Together with an
measurement over 600 m. With
that allow for fast, simple and
extra large high-resolution
the NavLight™ alignment aid,
dependable data transfer be-
display, the easy-to-use
the rod man can quickly align
tween the instrument and your
graphical interface makes
himself to the line-of-sight
PC or handheld controller using
regular tasks like stake-outs
without needing instructions.
easy to connect Plug and Play
easier and more productive
technology.
than ever before.
®
GeoMax Zoom30 Pro accXess6
Technical Data
Hz, V Standard deviation (ISO 17123-3)
Compensator system
Measuring range with circular prism
Accuracy on reflector (Fine/Tracking)
Reflectorless range accXess 6 / accXess 4
Accuracy reflectorless Communication
2 ”, 3 ”, 5 ”, 7 ”
Quadruple-axis compensation
3,500 m
2 mm + 2 ppm / 3 mm + 2 ppm
600 / 400 m (white target)
2 mm + 2 ppm (>500 m 4 mm + 2 ppm)
USB, Bluetooth, USB host, RS232
12
Distance measurement to
reflector and 600 m reflectorless
measurement
GeoMax Zoom30 Pro accXess4
Distance measurement to
reflector and 400 m reflectorless
measurement
Powerful apps
Every Zoom30 Pro series
instrument comes with a
complete range of powerful
applications. From survey to
stake-out to CoGo and volume
calculations, the Zoom30 Pro
has an app to get the job done.
•
Survey
•
Set-up with resection
•
Set out
•
Area 3D & volume
•
Remote elevation
•
Construction
•
Reference element
•
CoGo routines
•
Missing line measurement
•
Two Prism ooffsets
•
Road
GeoMax Total Station
Zoom20 Pro Series
The Zoom20 Pro withstands the toughest environments. With the optional polar certification, the Zoom20 Pro
is individually tested at -30° C. Our extensive factory tests ensure that GeoMax “works when you do”.
Onboard software
accXess™ EDM technology
Built for all environments
Easily control your data with
GeoMax’s accXess EDM tech-
The Zoom Pro withstands the
the flexible and easy-to-use
nology delivers outstanding
toughest environments. With
onboard software. Areas
dependability and class leading
the optional polar certification,
and volumes, reference
accuracy with and without a
the Zoom Pro is individually
elements, CoGo and more can
prism in even the most dif-
tested at – 30° C. With our
be accessed using the large
ficult conditions. Reflectorless
extensive factory tests, you
graphic display. Import and
accXess EDM technology is
can be sure that GeoMax
export in the format you want
available as accXess2 (250 m)
“works when you do!”.
for total control and flexibility.
and accXess4 (400 m) on the
GeoMax Zoom20 Pro series.
GeoMax Zoom20 Pro accXess4
Distance measurement to
reflector and 400 m reflectorless
measurement
Technical Data
Hz, V Standard deviation (ISO 17123-3)
Compensator system
Measuring range with circular prism
Accuracy on reflector (Fine/Tracking)
Reflectorless range accXess 4 / accXess 2
Accuracy reflectorless Communication
GeoMax Zoom20 Pro accXess2
2 ”, 3 ”, 5 ”, 7 ”
Quadruple-axis compensation
3,500 m
2 mm + 2 ppm / 3 mm + 2 ppm
400 / 250 m (white target)
2 mm + 2 ppm (>500 m 4 mm + 2 ppm)
USB, RS232
14
Distance measurement to
reflector and 200 m reflectorless
measurement
GeoMax Zoom20 Pro
Distance measurement on reflector
Powerful apps
Every Zoom20 Pro series
instrument comes with a
complete range of powerful
applications. From survey
to stake-outs to CoGo and
volume calculations the
Zoom20 Pro has an app
to get the job done.
•
Survey
•
Set-up with resection
•
Set out
•
Area 3D & volume
•
Remote elevation
•
Construction
•
Reference element
•
CoGo routines
•
Missing line measurement
•
Two prism offsets
GeoMax Total Station
Zipp20 - Open WinCE® Series
... operate it your way, store it your way, process it your way! Running fully open Windows® CE allows you
to operate the field software of your choice onboard the Zipp20 – Open WinCE® Series.
Totally open WinCE®
The Zipp20 is a fully open
WinCE® total station.
Featuring GeoMax FieldGenius,
X·PAD, Carlson SurvCE or any
localised field software, the
Zipp20 allows you to work as
best fits your needs. WinCE®
even allows you to run your
own developments and to
personalise your system.
Totally connected
With integrated Bluetooth®
and the capability to connect
to any tablet or data logger,
the Zipp20 provides you with
highest flexibility. Data and file
exchange using the USB stick
makes working with the Zipp20
quite simple and easy.
Technical Data
Accuracy (ISO 17123-3) Range with prism Non-prism range (Zipp10 R Pro) Accuracy with prism Non-prism accuracy Measuring time (Tracking/Quick/Fine) Reflectorless measuring time Totally featured
All the openness and
connectivity combined in a
system offering a colour &
touch display, long range nonprism measurement and all
your favourite Windows® CE
applications make the Zipp20
the total station that “works
when you do.”
GeoMax Zipp20 R2 5”, 2”
2”, 5”
3,000 m
250 m / 400m (white target)
2 mm + 2 ppm
3 mm + 2 ppm
0.33 sec / 2.0 sec / 2.4 sec
3.0 – 6.0 sec
16
Distance measurement on reflector
and 250m reflectorless
GeoMax Zipp20 R4 5”, 2”
Distance measurement on reflector
and 400m reflectorless
Zipp20 - Open WinCE®
Series
Featuring GeoMax FieldGenius,
GeoMax Layout Pro, X·PAD,
Carlson SurvCE or any localised
field software, the Zipp20
allows you to work the way
that best suits your needs.
With integrated Bluetooth®
and the capability to connect
to any tablet or data logger,
the Zipp20 provides you with
highest flexibility.
All this combined in a system
offering a colour & touch
display, long range non-prism
measurement and all your
favourite Windows® CE
applications make the Zipp20
the total station that “works
when you do.”
17
GeoMax Total Station
Zipp10 Pro Series
The Zipp10 Pro is your economic choice when price counts as much as performance. It provides seamless
data flow via a USB stick, coaxial reflectorless measurements and a full set of applications. These benefits
are proving again best price-to-performance.
Easy connectivity
Performance, robustness
Multifunctional keyboard
The Zipp10 Pro features a
Providing a 250 m reflectorless
With an ergonomic full numeric
simple transfer using a USB
measurement range, a long
keypad for rapid navigation
stick of all your data and files.
prism range of 3,000 m, a
and data entry provides for
Transferring data between
coaxial visible laserbeam
direct access to apps and
different total stations or the
combined with a dust and
fast navigation. The large
office is now easier than ever
water resistant sealed durable
high-resolution bright display
and liberates you from the
housing, makes the Zipp10 Pro
provides brilliant readability
need to use any PC.
a top performer in its class.
even in strong sunlight.
Technical Data
Accuracy (ISO 17123-3) Range with prism Non-prism range (Zipp10 R Pro) Accuracy with prism Non-prism accuracy Measuring time (tracking/quick/fine) Reflectorless measuring time GeoMax Zipp10 Pro 5”, 2”
2”, 5”
3,000 m
250 m
2 mm + 2 ppm
3 mm + 2 ppm
0.33 sec / 2.0 sec / 2.4 sec
3.0 – 6.0 sec
18
Distance measurement on reflector
GeoMax Zipp10 R Pro 5”, 2”
Distance measurement on reflector
250 m non-prism distance
measurement
The complete total station
With its 250 m reflectorless
measurement range, 2” and
5” angle accuracy, large
bright display and easy-to-use
applications, the Zipp10 Pro is
your ideal tool for all surveying
or construction tasks.
The Zipp10 Pro is the world’s
first total station in its class
featuring easy transfer via
a USB stick of all your data
and files. Transferring data
between different total
stations or the office is
now easier than ever and
liberates you from the need
to use any PC. Keeping your
total station where you
need it – in the field! Zipp10
Pro – “works when you do".
•
Data collect
•
Set out
•
Resection
•
Area & volume
•
Remote elevation
•
Missing line
•
Road
GeoMax GNSS
Zenith25 Pro Series
Equipped with the most advanced GNSS receiver
technology, Zenith25 Pro delivers ultimate performance.
Even in extreme environments, the dependable,
robust GNSS system “works when you do”.
Zenith20 Series
With the capability of tracking 60 satellites of GPS, GLONASS &
BeiDou simultaneously, Zenith20 provides a dependable positioning.
Zenith10 Series
The GeoMax Zenith10 is a complete and fully integrated
GNSS receiver, allowing to track simultaneously 38
satellites of the GPS and GLONASS systems.
20
GeoMax GNSS
Zenith25 Pro Series
Equipped with the most advanced GNSS receiver technology, Zenith25 Pro delivers ultimate performance.
Even in extreme environments, the reliable, robust GNSS system “works when you do”.
Extremely rugged
The Zenith25 Pro GNSS series
provides IP68 dust- and
waterproofness, enabling use
even in extreme environments.
The system is robust enough
to withstand a 2 m topple over
and a complete submersion
under water.
Truly future-proof
Powerful handheld
With its internal UHF, its
The PS336 series is a high
3.75G Penta band GSM and the
performance, robust handheld
full support of GPS, GLONASS,
for real time communications,
Galileo, BeiDou and SBAS
even in harsh conditions. With
systems, the Zenith25 Pro
Windows® embedded, this
Series is truly future-proof and
datalogger provides an open
suitable for any application.
system to any compatible
software, including GeoMax
FieldGenius and X·PAD.
Receiver Specifications
Q-Lock™ technology Max. No. of satellites Channels
Satellite signals tracked
Positioning rate Warm/cold start High fix availability and reliability
60 satellites simultaneously
120, dual frequency
GPS L1, L2, L2C; GLONASS L1, L2;
BeiDou B1, B2; SBAS
20Hz, 5Hz;
5 s / 43 s
Receiver Accuracy*
Static horizontal Static vertical Kinematic horizontal Kinematic vertical 5 mm ± 0.5 ppm (rms)
10 mm ± 0.5 ppm (rms)
10 mm ± 1 ppm (rms)
20 mm ± 1 ppm (rms)
22
* Measurement accuracy and reliability are
dependent on various factors including satellite,
geometry, obstructions, observation time,
ionospheric conditions, multipath, etc. Figures
quoted assume normal to favourable conditions.
Q-Lock™ technology
The Q-Lock™ technology
tracks all satellites with
the highest available signal
strength and performs regular
independent checks to ensure
that you can work even in
challenging environments
such as urban canyons or
under heavy foliage.
This is all combined in a
system robust enough to
withstand a 2 m topple
over and a complete
submersion under water.
GeoMax GNSS
Zenith10 & 20 Series
The Zenith Series are completely flexible systems, with all of the communication devices integrated into the
antenna. A rugged handheld packed with features supports the work in demanding environments and ensures
an excellent price-to-performance without compromising quality.
Fully integrated GNSS
Zenith10 & Zenith20 are
complete and fully integrated
satellite positioning systems.
They consist of only two main
components, a GNSS antenna
and a handheld computer
that can be setup on a pole or
tripod.
The integrated wireless
technology, provides a
completely cable-free and lightweight solution that is ready
for an entire day’s work.
GeoMax FieldGenius software
makes positioning easy
and includes many features
to satisfy even the most
demanding user. Finish tasks
faster than ever before with
the fully integrated Zenith
Series.
Quality GNSS
Equipped with state-of-theart NovAtel satellite receiver
technology, the Zenith10 &
Zenith20 provide maximum
performance. The AdVance®
RTK technology, developed by
NovAtel, ensures maximum
positioning availability under
challenging conditions.
Both receivers can track
satellite signals of the GPS
and GLONASS type. The
Zenith20 additionally supports
BeiDou and Galileo. By having
access to a maximum number
of satellites, positions can
be determined at any time,
ensuring that GeoMax GNSS
"works when you do".
24
Complete flexibility
The Zenith10 & Zenith20 are
completely flexible systems,
with all of the communication
devices integrated into the
antenna. It’s easy to switch
between the UHF radio to
receive correction data from
a local reference station and
the GSM modem to receive
corrections from a regional
network. At times when no
corrections are available, raw
data can be easily logged for
post-processing in the office.
The Zenith10 & Zenith20
can also operate as a local
reference station, transmitting
data either with the internal
radio or an external high power
transmitter.
One box, one price
Zenith10 & Zenith20
include all components and
accessories required for any
type of measurement task.
These are supplied in one
rugged container to ensure
nothing is left behind.
With no additional hidden
costs, you’re ready to go
from day one with Zenith10
& Zenith20. This is the
only GNSS series you’ll
ever need because it has
a quality and price that's
unique in the market.
GeoMax GNSS
Zenith10 & 20 Series
Office software
GeoMax offers GeoOffice
(GGO) as a versatile PC
software to handle all your
fieldwork. GGO is based
on an intuitive, graphical
interface making it quick
to learn and easy to use.
All the data is displayed
Flexible import and export
Coordinate transformations
graphically providing a clear
Data can be transferred
GGO includes a range of
overview of your work. By
directly between GeoMax
tools for defining coordinate
simply selecting any element,
instruments and GGO. The
systems and to transform
the related information can
ASCII export allows the crea-
coordinates into a local
be accessed or edited.
tion of data files in any format.
system. Using geoidal models,
GNSS measured ellipsoidal
Receiver specifications
heights can be converted
NovAtel AdVance® technology
Zenith10 72 channels (GPS/GLONASS), max. 36 satellites simultaneously
Zenith20 120 channels (GPS/GLONASS/Galileo/BeiDou), max. 60 satellites
simultaneously
Satellite signals tracked: GPS L1, L2, L2C, GLONASS L1, L2, Galileo*, BeiDou
5 Hz raw measurement & position outputs, 20Hz optional
RTK signal initialization typically less than 10 sec***
Initial capture time < 15 sec***
Internal memory 256 MB (more than 60 days of raw static data storage with
recording sample every 15 sec)
to orthometric heights.
Receiver Accuracy**
the parameters used in
Static horizontal accuracy Static vertical accuracy Kinematic horizontal accuracy Kinematic vertical accuracy DGPS/RTCM differential positioning 5 mm ± 0.5 ppm (RMS)
10 mm ± 0.5 ppm (RMS)
10 mm ± 1 ppm (RMS)
20 mm ± 1 ppm (RMS)
0.25 m (RMS)
* The optional Galileo tracking will be made available once there are sufficient of these satellites.
** The position accuracies depend on various factors including number of satellites, geometry, ionospheric
conditions, multipath, etc.
26
GNSS post processing
Raw data can be imported
into GGO from all types of
GNSS sensors. The post
processing module allows
extended user control over
the baseline computations.
Resulting reports provide
detailed information about
the processing procedure
and data obtained.
Field software
Zenith10 & Zenith20 are open systems that support any Windows
Mobile-based field software. A standard Zenith Series configuration
is supplied with GeoMax FieldGenius, a fully featured intuitive field
software package. With large main menu icons, tasks can be quickly
found and executed directly with the touch screen.
Your survey work is always shown graphically ensuring you see all of
your design and measured data. Elements can simply be selected by
using the touch screen display.
Supporting a full range of export formats, your field work can be
transferred directly to your office software.
27
GeoMax Dataloggers
PS336 Series
These rugged field-ready Windows® embedded handhelds were built to
meet GeoMax requirements for power, functionality and ruggedness,
ensuring that they always “work when you do”.
Z710 for X•PAD Android
We have chosen the compact and powerful, new Android-powered
Z710 rugged tablet to provide you the flexibility to work in nearly
any environment. Compact, durably built and equipped with a brilliantly readable touch display, built-in 5 Megapixel camera, GPS,
E-compass and 3 axis accelerometer – the Z710 has you covered.
X•PAD Android is world´s first Android surveying solution.
28
GeoMax Datalogger
PS336 Series
These rugged field ready Windows Mobile® handhelds were built to meet GeoMax requirements for power,
functionality and reliability, ensuring that they always “work when you do”.
Fully equipped
Extremely rugged
Fully flexible
The PS336-E model contains
The PS336 series is a high
The featured Windows
high-speed communication
performance fully rugged
Mobile® provides an open
technology for internet
handheld for real-time
system for any compatible
connection to all network
communications even in
software, such as GeoMax
types. Built-in GPS receiver,
harsh conditions. It is rated
FieldGenius, X·PAD, SurvCE,
E-compass, altimeter and
IP68 dust and waterproof and
etc. for full connectivity
5M pixel auto-focus camera
meets military standards.
to all GeoMax devices.
are neatly integrated into
an all-in-one solution.
The PS336-E extended
PS336
PS336-E
Wireless LAN
•
•
Internal Bluetooth®
•
•
Micro SD card slot
•
•
Up to 32 GB memory *
•
•
29 keys
•
•
Illuminated keys
•
•
5M pixel autofocus camera
•
48 channels GPS receiver
•
Electronic compass
•
Altimeter
•
Long-range Bluetooth® **
•
* Optional, ** Requires optional long-range Bluetooth® cap
30
model`s expansion slot
enables the fitting of a long
Range Bluetooth® cap which
can be used as remote control
in combination with the
Zoom80 robotic Total Station.
PS336
Standard
PS336-E
Extended
Physical specifications
Weight: 0.53 kg (PS336)
Operating temp.: – 30°C to 60°C
Protection class:
IP68 dust- and waterproof /
MIL-STD-810G
Humidity: 95 %, non-condensing
Computing platform
Operating system:
Windows® embedded handheld 6.5
Processor: Texas Instruments 1 GHz
Memory: Up to 32 GB *
Interface
Keyboard: 29 keys, illuminated
Display: 3.5” Full-VGA QuadraClear™ technology colour- &
touchscreen
I/O interface: serial,
USB On-The-Go, DC jack
Power supply
Internal battery:
Removable Li-Ion 5.6 Ah / 3.7 V
Operating time: Up to 15** hours
LifeSupport™: Battery swap
without shutdown
* Optional, **New battery, at 20°C
GeoMax Datalogger
Z710 for X•PAD Android
X•PAD for Android presents a new way of working, based on the most evolved and technologically
advanced platform for mobile devices. For the first time, software designed for topographic survey
and staking out in the field is available on Android with a wide range of user-friendly features. Used in
conjunction with GeoMax instrumentation, X•PAD for Android will change your way of working forever.
The controller?
Augmented reality.
Your data on Google Maps.
It’s up to you.
Get the full picture!
With X•PAD you can see
X PAD for Android can be
How can augmented reality
your survey and your design
supplied with a rugged
be a useful tool in topographic
superimposed on a satellite
tablet, featuring a 7” touch
surveys and stake-out? Here’s
map via Google Maps at any
screen with the breadth and
how. Simply point the camera
stage. See your position
brightness to give the display
to the area of interest and you
on the map, check the
instant clarity, so you can
can immediately see where
position of your reference
view the data quickly and
the points and elements to
points or measure distances
with minimum effort in all
be staked out are. X•PAD
and surfaces directly from
conditions. Or you can also
will guide you to the vicinity
CAD. This facility offers a
opt to use the X•PAD on your
of the point and then to the
revolutionary way of working.
existing tablet or smartphone.
exact location. But you can
It all adds up to maximum
also use augmented reality
flexibility for you, the user.
to see what is not visible,
•
such as underground pipes,
cables and connections.
X•PAD allows you to integrate
reality with your data.
32
GeoMax Z710
X·PAD Android on the Z710
tablet can be used for all
GeoMax Zenith GNSS
antennas as well as
manual and motorised
Zoom Total Stations.
Compact
Built to house a brilliant 7’’
display, the Z710 comes
with 800 g light and is small
enough to hold with just
one hand, yet big enough to
help you get the job done.
The Z710 is specifically
engineered to be protected
against 2 m drops, shocks,
spills, vibration and more.
Equipped with tempered
glass and a temperature
range of – 20°C to 50°C.
Built-in GPS, combined
with E-compass and 3-axis
accelerometer, the Z710 is
the perfect device for anyone
using GPS data in the field.
33
GeoMax Locators
EZiTEX Signal Transmitter
Delivering significantly higher power than previous model transmitters.
The enhanced performance
Flexibility
enables:
• Trace services over a greater
distance
• Improved service detection
in areas of high signal
interference
• Improved depth estimation
when using a depth locator
Compact design with an IP65
rating, the transmitter is
fully protected even in the
harshest of conditions.
Benefits
• Four adjustable output
levels, deliver a maximum
output level of 1 watt
• Durable weatherproof design
• Environmental protection
rating of IP65 with robust,
compact and lightweight
design engineered for tough
site conditions
• Choice of 3 tracing signals
• 33 kHz everyday site use,
generally accepted as an
industry standard
• 8 kHz long tracing and
reduced cross coupling
• 8 and 33 kHz (connection
mode)
• Ease of use. Default output
frequency of 33 kHz
• Externally located clear,
audio visual controls,
ensuring a robust waterproof
design
• Built-in test function,
allowing operators to test
the hardware and software
functionality of the EZiTEX
before use
EZiTEX t100
Operating transmission frequencies
Output power
Induction (Max)
Direct connection (300 Ohms)
Battery type
Battery life (typical use at 20°C)
Weight
Dimensions (H x D x W)
IP rating (case lid closed)
IP rating (case lid open)
34
8 & 33 kHz, mixed 8/33
4 levels
Up to 1 W max
Up to 1 W max when connected to a buried service with an
4 x D alkaline (IEC LR20), supplied
30 hours intermittent use
2.4 kg including batteries
105 mm x 190 mm x 235 mm
IP65
IP54
GeoMax Locators
EZiCAT Series
Obtaining accurate information about the location of buried utilities has never been more
essential to protect employees and equipment during any excavation project.
How does the EZiCAT
The EZiCAT’s intelligent
locate?
software interprets the signal
The EZiCAT range locates
data and provides the operator
buried utilities by receiving
with an audible and visual
electromagnetic signals
response to the location and
which radiate from them.
direction of buried utilities.
EZiCAT i500
Frequency / mode
Depth
Protection
Power mode 50 Hz or 60 Hz, radio mode 15 kHz to 60 kHz
Transmitter mode 8 kHz and 33 kHz,
Auto mode = Power + radio mode
Power to 3 m, radio to 2 m, transmitter mode to 3 m
Conforms to IP54
EZiCAT i550
Frequency / Mode
Depth
Depth Estimation
Protection
Power mode 50 Hz or 60 Hz, radio mode 15 kHz to 60 kHz
Transmitter mode 8 kHz and 33 kHz,
Auto mode = power + radio mode
Power to 3 m, radio to 2 m, transmitter mode to 3 m
10 % of depth in line or sonde (0.3 to 3 m depth range)
Conforms to IP54
EZiCAT i650
Frequency / mode
Depth
Depth estimation
Protection
Compatibility
Memory size
Capacity
Power mode 50 Hz or 60 Hz, Radio mode 15 kHz to 60 kHz
Transmitter mode 8 kHz and 33 kHz,
Auto mode = power + radio mode
Power to 3 m, radio to 2 m, transmitter mode to 3 m
10 % of depth in line or sonde (0.3 to 3 m depth range)
Conforms to IP54
CSV file compatibility program
32 MB memory
80 hours of data
35
GeoMax Digital Theodolite
Zipp02
Closing the gap, Zipp02: For all your general construction tasks
requiring accurate angle measurement. Affordable, easy to use,
flexible – quite simply, it “works when you do”.
Zipp02 – closing the gap
With vertical compensation
stadia lines all make for
and 2” accuracy the Zipp02
easy operation with only six
provides you with the
keys. Visible laser plummet
precision required for your
enables you to set up over
most demanding jobs at an
a point faster and easier
affordable price without adding
than ever. The Zipp02 is the
complexity. Various display
tool of your choice when it
modes, hold and set zero for
comes to checking angles,
horizontal angle, a variation
alignments, grade work
of measurement units, simple
and short range levelling.
distance measurement via
Technical Data
Precision
Magnification
Compensator system
Display
Keys
Operation period without laser plummet
36
2 ”
30 x
Automatic vertical compensator,
User set on/off
Double side large character
back-lit LCD
6 one-touch button functions
36 h
GeoMax Digital Level
ZDL700 Series
At GeoMax we understand that you require accurate results and demand ease of use in combination with
fast operation. That’s why we’ve introduced the ZDL700 digital level for the surveying and construction
world. Now you can ‘go digital’ for your entire levelling task with a product that delivers outstanding
price-performance and “works when you do!”.
Quick, easy & error-free
enable you to execute all
The super fast measurement
calculations with the ZDL700.
speed of less than 3 seconds in
Based on digital readings and
combination with the simplicity
automated calculation, you
of the one-push measure and
will never again be slowed
store functionality provides
down by time-consuming
faster, more economical
calculator usage.
workflows. Digital reading
combined with internal
Accurate
memory make misreadings
Extensive field tests verify
and operator interpretation
the excellent accuracy
errors a thing of the past.
of the ZDL700 of 0.7 mm
for 1 km double-run level.
Leave the calculator in your
This makes the ZDL700
pocket
an ideal level not only for
The onboard adjustment
high order levelling but also
program, height difference
deformation measurements
calculation, inverse staff
and precise surveying, as well
measuring mode, in
as general construction.
combination with various
measuring configurations
Technical Data
Height accuracy Distance accuracy
Maximum range
Single measurement speed
Internal memory
± 0.7 mm/km
D < 10 m, 10 mm
D ≥ 10 m, 0.001 x D
105 m
< 3 seconds
2,000 measurements
37
GeoMax Automatic Level
ZAL300 Series
Get all your tasks done with GeoMax’s flagship level. From daily levelling tasks to high accuracy,
the ZAL300 Series is your first choice when robustness, comfort and accuracy count.
It simply “works when you do!”
20 x / 24 x / 28 x / 30 x Magnification
Flexible and ergonomic
With four different types of
magnifications, 20x, 24x,
28x and 30x, the ZAL300
series offers the accuracy of
your choice. The patented
magneX™ compensator
system from GeoMax used
MagneX™
Magnetic-damped
compensator
IP57 Waterproof
Focusing knob
Bubble mirror
Gas filled
telescope body
Selectable
360 °/400gon
horizontal
circle
in the ZAL300 series with
magnetic dampening makes
Endless
fine drive
stuck a thing of the past.
ZAL330
Technical Data
Magnification
Minimum focusing distance
Compensator damping system
Standard deviation for 1km double-run levelling
Horizontal fine motion screws
Dust and water resistance
Base / base screw
38
30 x 0.8 m
magneX™,
1.2 mm ZAL328ZAL324ZAL320
28 x
24 x 20 x
0.6 m
automatic, magnetic-damped
1.5 mm 2.0 mm 2.5 mm
Double-sided endless drive
Conforms to IP57 (Gas filled telescope)
Concave and flat / 5/8 ”
GeoMax Automatic Level
ZAL100 Series
Suitable for outdoor as well as for indoor use the user friendly ZAL100 Auto Level Series from GeoMax is
your guarantee to get the job done, accurately and on time.
32x / 28x / 24 x / 20 x magnification
Built to last
IP54 waterproof
focusing knob
With the ZAL100 Series,
bubble mirror
GeoMax introduces an automatic level to the construction industry that is designed
air-damped
compensator
adjustable 360 °
horizontal circle
for your daily levelling tasks
with an outstanding price-toperformance ratio. Meeting the
IP54 class specifications guarantees waterproofing of the
endless
fine drive
ZAL100 Series and provides
you with an instrument that
“works when you do!”.
Technical Data
ZAL132
ZAL128ZAL124ZAL120
Magnification
32 x 28 x
24 x
ImageErect
Minimum focusing distance
< 1.0 m
Compensator damping system
Automatic, air-damped
Standard deviation 2.0 mm for 1km double-run levelling
Graduation / intervals
360 ° / 1 °
Horizontal fine motion screws
Double-sided endless drive
Dust and water resistance
Conforms to IP54 (IEC60529)
Base / base screw
Concave and flat / 5/8 ”
39
20 x
2.5 mm
GeoMax Laser Rotator
ZEL400 Series
With its proven performance the ZEL400 laser rotator series covers the whole range from internal
applications to general construction – a true multi-purpose tool.
Hand detector
& remote control
Vertical plumb
Head protection
Highly visible beam
Waterproof
housing
Non-slip
rubber
handle
Tilt function
Rubber
bumpers
Adjustable
footscrews
Solid & economic
price-to-performance ratio. Its
Totally automatic thus easy
ruggedized design, protected
and fast to setup, and in
head and waterproof housing
combination with advanced
makes the ZEL400 series
technology, GeoMax delivers a
the tool for all your tasks
laser rotator with outstanding
that “works when you do!”.
ZEL400HV Technical Data
ZEL400H+ Range
300 m (diameter)
Levelling range
± 10 %
Levelling
h & v auto
h auto & v semi-auto
Accuracy (at 30 m)
h: ± 3 mm
h: ± 3 mm
v: ± 3 mm
v: ± 10 mm
Tilt alert control
yes
Battery
2 Alkaline D size, 160 hours,
NiMh rechargeable 50 hours
Detector/remote control
ZDR300 Detector w. integrated remote control
40
ZEL400H
h auto
h: ± 3 mm
v: N.A.
ZDT200
Detector
GeoMax Laser Rotator
ZLT300/200 Series
At GeoMax we understand that your equipment should be as flexible as you are. With the ZLT300 and
ZLT200, we introduce a series of multi-purpose lasers that cover the entire range from machine control,
site work, pipe laying to interior finishing.
We level, you work
Now is the time to stop chasing
bubbles to get your job
levelled. And the good thing is
that you are only one button
push away. From site work
and levelling to alignment,
pipe laying, interior finishing
and civil engineering projects,
the ZLT300 and ZLT200 are
Dual grade slopes
the partners that help you to
With manually adjustable
get the job done in time, with
grades, you can simply match
the required accuracy and
slopes in one or two axis by
dependability. And all of this
using the laser in manual
with the price-to-performance
mode. While used on one man-
ratio GeoMax is known for.
ual slope, the automatic cross
axis self levelling provides you
with maximum security.
Technical Data
Range
Levelling range
Levelling
Accuracy
Tilt alert control
Laser battery life
Environmental
Detector/remote control
ZLT300
ZLT200
800 m (diameter)
± 8 % ± 5 °
Automatic horizontal
Automatic horizontal
and vertical
±10 mm at 100 m
User definable laser shut-off
50 h with internal rechargeable NiMH battery
IP67 waterproof
ZDR300 Detector
ZDT200 Detector
with integrated
remote control
41
GeoMax Laser Rotator
Zone50 Series
Featuring a fully automatic as well as an automatic model, the Zone50 Series provides the perfect match
for any work site requiring highest precision, outstanding durability and extensive range.
Zone50 FA
The Zone50 FA is a fully automatic dual grade laser with
an aluminium-cast housing
for withstanding even the
harshest conditions. As a fully
automatic laser, it not only
Alignment telescope (optional)
> 400 m Remote range
> 300 m Radius
workrange
permanently readjusts the defined grade to ensure highest
Metal housing
accuracy and dependability.
Zone50 A
> 100 m Remote range
> 500 m Radius
workrange (3R)
> 300 m Radius
workrange (2)
Slope range ±15%
Rotation speed
0/600/1,000 upm
constantly checks but also
Independent X and Y
adjustment
Slope range ± 10 %
Sector lock
Rotation speed
0/600/800 upm
Sector lock
IP67 Dust & waterproof
Tilt control HiAlert
The Zone50 A is an Automatic
laser with grade capability.
Equipped with the same sturdy
aluminium-cast housing and
IP class 67 as the Zone50 FA,
this laser is built to last on
Technical Data
Range
any jobsite under any conditions. With more than 100 m
range for the remote and 300
m laser radius, the Zone50 A
provides you with an extensive
work range.
Levelling range
Levelling
Accuracy
Tilt alert control
Battery
Environmental
Detector/remote control
42
Zone50 FA
Zone50 A
Depends on receiver: >500m radius (Laser class 3R)
>300m radius (Laser class 2)
± 5 °
-15% up to 15% ±5mm at 100 m yes
NiMH; changing 4h IP67 dust and waterproof
(FAR) RG50FA
>250m radius
-10% up to 10%
(AR) RG50A
Precision input of slopes
Enter your slopes in a range of
± 15 % (± 10 % for Zone50 A)
with highest precision either
via the remote unit or directly
at the laser.
Dual or single grade
All lasers of the Zone50
Series allow you to use two
independent axes to define
your grade values providing
you full flexibility on complex
jobs.
Remote control
The RG50FA and RG50A
optional remote controls
provide a range of more than
400 m and 100 m radius. All
functions of the laser can be
controlled via the remote. Even
a reactivation of the rotation
following a tilt sensor stop is
possible via the remote. Users
can easily run several lasers
in parallel on the same site
by pairing the laser with the
remote control.
Control function
Equipped with tilt-control
function, the Zone50 lasers will
Sector lock –beam masking
Electronically turns off the laser
beam in specific quadrants to
prevent interference with other
crews on the site. Can also be
used to avoid shining into a
roadway or to avoid reflective
surfaces, which may give a
false reading.
be switched off automatically
if displaced inadvertently or
disturbed significantly by wind.
Lower sensitivity settings
towards wind & vibrations
can be selected to allow
continuous operation and are
supported by an automatic
re-adjustment.
43
GeoMax Software
Full flexibility in software
GeoMax Geo Office
The ideal office software companion for your GeoMax field equipment. With
complete seamless dataflow, your field results are effortlessly transferred to
the office environment ready for further processing, CAD creation or direct
delivery to clients.
GeoMax FieldGenius Premium
FieldGenius has evolved into the most powerful and productive data collector
in the land surveying market.
GeoMax Layout Pro
An easy-to-use graphical field product designed specifically for the
construction layout professional.
X·PAD Survey and X·PAD Construction
With X·PAD, productivity and flexibility in the field are assured due to an
easy user-interface and to highly innovative contents.
X·PAD Android
X·PAD Surveying and Construction for Android presents a new way of
working, based on the most evolved and technologically advanced platform
for mobile devices.
44
At GeoMax, we offer a broad selection of tailor-made software to give you the possibility of choosing the one
that suits your ways of working best.
45
GeoMax Software
GGO – GeoMax Geo Office
GeoMax Geo Office (GGO) is the ideal office software companion for your GeoMax field equipment. With
complete seamless dataflow, your field results are effortlessly transferred to the office environment ready
for further processing, CAD creation or direct delivery to clients.
Easy-to-use
Following Microsoft Windows
standards, GGO is easyto-use, even for novice
PC users. Through use of
icons and graphics working
with data in GGO is as easy
as “point and click”.
RINEX Import/Export
Prepare, visualize and edit
Data processing
Support of GNSS processing
GGO has a full suite of tools
and reporting
using multiple sensor brands
that allow you to get the most
When post-processing of
is assured thanks the GGO’s
out of your equipment before
GNSS (GPS+GLONASS) data
RINEX Import/Export option.
going on-site. With a little
is required, GGO provides
By using the industry standard
preparation, you’re ready to
state-of-the-art technology
RINEX format you can import
be fully productive to work the
to guarantee you always
third party receiver data and
way you work. Once you’ve
produce optimal results. No
post-process in GeoMax Geo
completed your survey and
special knowledge of GNSS is
Office.
seamlessly imported your
required; simply import data
field results into GGO, all
and GGO will automatically
observations are immediately
process all possible GNSS
available for visual
baselines. Once results are
confirmation of field activities.
available they can be simply
If errors or changes are found
presented in customised
they can be easily edited
reports ensuring you need no
to deliver perfect results.
further preparations, and your
results are ready for clients.
46
Least squares adjustment
A rigorous 3D least squares
adjustment package is
available in GeoMax Geo
Office. This option allows
the adjustment using least
squares of GNSS, total station
and combined data using a
variety of different parameters
and coordinate systems. The
results are stored in well
designed HTML reports.
GeoMax
GGO
47
GeoMax Software
FieldGenius Premium
GeoMax FieldGenius delivers you a powerful data collection software for all your daily surveying tasks in the
field. Fully equipped with four integrated modules, FieldGenius covers the entire range: from manual Total
Stations to Robotic to GNSS.
Digital terrain modeling,
volumes and contouring
FieldGenius has the ability to
create & utilise DTM surfaces
from existing survey data or
create a DTM in real-time as
the data is collected. The TIN
and contours will automatically
update with each new shot.
Powerful roading
FieldGenius roading allows you
to manually input or import
your alignment data including
centerline, vertical and
template data. Stake your
points along your alignment
with confidence.
Instrument control
at your fingertips
Total Station and GPS
functions are available
on a common
and easy-to-use
instrument toolbar.
Access measuring
modes with the click
of a button.
All you need in one sotware
Total Station
Full support.
GNSS/GPS
Support for RTK GPS
receivers
Advanced
Roading, surfacing, slope
staking functions
48
Robotic
Functionality for robotic
total stations
GeoMax Software
Layout Pro
GeoMax Layout Pro is a simple-to-use locating program designed specifically for construction layout and MEP
contractors. GeoMax Layout Pro gives you all the tools you need to layout your points accurately and easily.
Contractor friendly
• Code-free linework
• Linework is created
automatically
• No need to connect the
dots back at the office
Advanced display and platforms
• Map screen to lay out data and
collect as-built details
• Easy to use menu structure
• Portrait and landscape devices
supported
Easy layout
• Stake points/lines by
selecting the map screen.
• Select the points for
staking, Layout Pro will
automatically guide your
layout process
• Stake DXF CAD drawings
by selecting DXF entities
As-built and topographic tools
• As-built routines to measure
existing conditions for as-built
reports or drawings
• Export to other third party
applications
• Cut / fill analysis, volume
calculations or DTM model
creation
Easy setup
• Begin work quickly
• Reference point routine
to establish your total
station location
• Reference point check
to confirm and to check
your position
Road alignment layout
• Input alignment data from
paper drawings
• Input horizontal alignment,
vertical profiles and templates
49
GeoMax Software
X·PAD Survey & Construction
X·PAD Survey
X·PAD Survey combines a complete solution for all surveying tasks with a simple and easy to learn userinterface. Covering all tasks from simple stake-outs via terrain models and volumes, to road stakeout and
CoGo X·PAD boosting your productivity and flexibility in the field.
X·PAD Construction
X·PAD Construction also enables non-surveyors such as foreman to conduct all the stake-out and measuring
routines they face every day independently. This boosts productivity and enables them to work more
independently. Strictly following construction terminology and procedures, X·PAD Construction “speaks” the
language of the construction site.
The Windows based X·PAD Survey as well as X·PAD Construction can be used in combination with all GeoMax
manual and Robotic Total Stations as well as with GNSS.
Collect more than just
coordinates
X·PAD goes further than
measuring the position of
the point, you can integrate
positions photos, notes and
voice comments as well. Quick
codes allow you to create your
own customer panels for the
most used codes.
Stake out with your eyes
closed
Let the voice guidance navigate
you to the target without even
looking at the display or use
the extra large compass for
easy visual navigation. Stake
out directly from any imported
CAD drawing without timeconsuming conversion process.
Survey and draw at the
same time
The innovative automatic
drawing system operated by
feature codes allows you to see
the map coming to life, point
by point, without requiring long
and complex coding.
… and still more
• CoGo
• Terrain models and volumes
• Road stake out
• CAD
• As-built check
• Monitoring
• Cadaster
• Bathymetry ...
50
GeoMax Software
X·PAD Android
X·PAD for Android is the world’s first professional surveying and construction software base on Android. It
presents a new way of working based on the most evolved and technologically advanced platform for mobile
devices. X·PAD for Android offers all the known feature of its Windows equivalent and even more. Used in
conjunction with the GeoMax manual and robotic Total Stations as well as with the GNSS X·PAD Android will
change your way of working.
Augmented reality - get the full picture
Simply point the camera to the area of interest to see the
elements to stake.
Finding your project- as simple as that
Don’t remember the name of file, but know when and
where it was done? Simply chose your project via location
on Google maps or on the calendar.
Your data on Google maps
Superimpose your data on a satellite image
via Google maps at any stage of your
project to check for reference points or
measure directly in the drawing.
51
GeoMax Accessories
Dependable work demands dependable accessories. We recommend the individually tested GeoMax accessory selection for best performance in all your tasks. Of a quality that meets the highest demands, you can
be assured that the complete range of GeoMax accessories “work when you do!”.
ZST101
Tripod-star, for setting up of
tripods on hard and slippery
surfaces.
ZTW100
ZTA100
ZTR101
Wooden tripod with shoulder
Aluminium light weight tripod
Tribrach without optical
strap and side clamp screws,
with shoulder strap and
plummet, black.
104 cm packaged length,
side clamp screws, 105 cm
ZTR103
extendible to 166 cm,
packaged length, extendible
Tribrach with optical plummet,
weight 5.7 kg.
to 167 cm, weight 4.5 kg.
black.
52
ZPC105
ZPC200
ZPC201
Telescopic snap lock aluminium
Telescopic carbon fibre and
Telescopic carbon fibre and
pole with 1/4” thread connec-
aluminium pole for GNSS.
aluminium pole for TPS.
tor and screwable pin adapter.
Extends to 230 cm.
Extends to 230 cm.
ZPC210
ZST100
ZHR200
GNSS pole, 40 cm, for
Telescopic, dual-strut pole
Pole holder for
mounting Zenith receiver
support. Suitable for all
Handheld PS336.
on carrier as extension.
GeoMax poles and level staffs.
ZCA100
ZCA101
ZCA102
Tribrach carrier for GNSS
Tribrach carrier with stub
Reflector carrier with tubular
antennas.
for prisms.
level and optical plummet, for
Snap lock at 1.5 and 2 m.
precise positioning.
53
GeoMax Accessories
GRZ4
GRZ122
ZDE100/GFZ4
360° prism with soft bag.
360° prism with 5/8” for
Diagonal eyepiece.
GNSS antenna.
ZSA504
Four-section telescopic
staff. Provides dual
measuring faces with
bar code and millimetre
ZMP100
ZPR100 and ZTP100
Mini prism 0-constant with tip,
Circular prism with red holder,
fits to ZPC105 pole.
0-offset. The ZTP100 target
ZSF301
plate for precise aiming over
Dual face high accuracy
long distances is separately
fibreglass levelling staff,
available.
3 m, 1 section, barcode/
graduations.
E-Scale cm-graduation,
with circular bubble and
handle.
ZSE504
Level staff 5 m, 4
ZPM100
ZTM100
sections, front side
Sliding mini-prism. True
Self-adhesive reflective target
with E-graduation
0-constant prism, includes
6 x 6 cm. For measurement of
and back side with
bubble, 4 mini poles and pole tip.
surfaces with standard EDM.
mm-graduation.
54
ZCB100
ZCT102
ZCT105
Backstrap for hard
Hard shell container
Soft bag for accessories,
shell containers.
for 2 circular prisms, 2
controllers or tablet PC.
carriers and 2 tribrachs.
ZCH201
ZCH202
ZCM101
Rapid charger or Li-Ion
Dual charger for ZBA202.
Industrial CF-card 256MB.
batteries ZBA200 and ZBA400.
ZCM04
Includes car adapter cable.
Micro SD Card 4GB.
Batteries
High output Li-Ion batteries.
ZMC100
ZBA301 for Zipp10 Pro/Zipp20/ZT20 Total Stations, 4.4 Ah
The 4 GB USB memory
ZBA101 for ZTS600 Total Stations & ZDL700 Level
stick is suitable for GeoMax
ZBA201 for Zoom Total Stations and Zenith25 GNSS, 2.6 Ah
instruments, providing the
ZBA400 for Zoom Total Stations, 4.4 Ah
highest data dependability.
ZBA202 for Zenith10/20 GNSS, 2.5 Ah
CBA1
for PS336 Dataloggers, 5.6 Ah
55
GeoMax Accessories
Storm ZDD
QL314S
LR 300
The digital readout displays
A very sturdy receiver with
Receiver with a 4 cm reception
the height difference to the la-
additional display on the back
field and adjustable sound vol-
ser as soon as it is detected in
side. Powered by recharge-
ume. Powered by 9V-alkaline.
the 127 mm reception window.
able NiCd batteries. Protection
IP67.
MR240
MR360 and MD360 machine
SmartRod
Machine control receiver, fixed
control receivers
Extend the 4 m telescopic
with extremely strong mag-
with separate in-cabin display,
SmartRod to easily capture the
nets. Powered by alkaline bat-
connected via radio, powered
laser beam within the 165 mm
teries (up to 160 h) – no cables
by built-in rechargeable NiCd
beam detection window and
required.
batteries – no cables required.
receive height measurements
Available with clamps or mag-
on the digital display. No mis-
nets.
reading and a new dimension
of range.
56
GeoMax Accesories
Cables
Total Station, Controller & Digital Level
Zipp10 Pro/Zipp20 USB Zoom20/30/35 Pro RS232 USB
ZTS600, ZDL700 RS232
USB
Cable mini-USB to USB host connecting Zipp10 to a PC/Tablet.
Cable Hirose-RS232 connecting Zoom20/30/35 (Pro) to a PC/Tablet using serial transfer technology.
Cable Lemo-USB connecting Zoom20/30/35 (Pro) to a PC/Tablet using USB transfer technology.
Cable Hirose-RS232 connecting ZTS600 & ZDL700 to a PC/Tablet.
Cable Lemo-USB connecting ZTS600 & ZDL700 to a PC/Tablet ZDC301
ZDC100
ZDC217
ZDC100
ZDC102
GNSS
Zenith10/20
USB RS232 Satel EASyPro/battery
Zenith25
RS232
USB
Satel EASyPro/battery
TNC
TNC
Cable Lemo-USB for Zenith10/20 connecting the device to a PC/Tablet.
ZDC222
Cable Lemo-RS232 for Zenith10/20 connecting the device to a PC/Tablet. ZDC220
Y-Cable Lemo to Lemo and clamps to connect Zenith10/20 ZDC221
with Satel EASyPro radio and external battery for power supply. Cable Lemo-RS232 for connecting Zenith25 to a PC/Tablet.
ZDC227
Cable Lemo-USB for connecting Zenith25 to a PC/Tablet.
ZDC226
Y-Cable Lemo to Lemo and clamps to connect Zenith25 ZDC225
with Satel EASyPro radio and external battery for power supply.
TNC to TNC cable. 2m extension for radio antenna.
ZDC202
57
GeoMax Quality Management
Built for all environments
With the design criteria
“works when you do!” GeoMax
Our commitment to quality
Our commitment to safety
The internationally active Swiss
and the environment
Association for Quality and
All GeoMax products are fully
Management Systems SQS,
CE (Conformité Européenne)
as well as the International
as well as RoHS (Restriction of
Certification Network IQNET
the use of certain hazardous
certified that GeoMax AG meets
substances in electrical
the requirements of ISO9001,
and electronic equipment)
Quality Management System
and WEEE (Waste from
and ISO14001, Environmental
Electrical and Electronic
Management System.
Equipment) conformant.
- Certified area:
Whole company.
- Field of activity:
products are built to withstand
Development, manufacture,
all environmental conditions.
distribute, support and
GeoMax equipment is built with
service of products,
the intention to withstand all
precision tools and systems
conditions you run into during
for geomatic, industrial and
your daily work. Rain, hail,
construction applications.
snow or intense heat will never
affect your GeoMax equipment
- you can always keep
Distance meter (Reflector mode):
Laser class 1 in accordance with IEC 60825-1
resp. EN 60825-1
working to get the job done.
Laser plummet:
Laser class 2 in accordance with IEC 60825-1
resp. EN 60825-1
Distance meter (Reflectorless mode accXess™):
Laser class 3R in accordance with IEC 60825-1
resp. EN 60825-1
Windows® CE, Windows® 7, Windows® Embedded,
and Windows® Mobile are registered trademarks of
Microsoft Corporation.
The Bluetooth® word mark and logos are owned by
Bluetooth SIG.
NovAtel OnBoard® is a registered trademark of
NovAtel Inc.
Other trademarks and trade names are those of
their respective owners.
58
Notes
59
GeoMax
Brochure Basket
Total Station
Zoom80 Series
Total Station
Zoom35 Pro Series
Future-proof
• Quad-/penta band
GSM/GPRS/UMTS
• UHF radio and Bluetooth®
• True GNSS: GPS, GLONASS,
BeiDou, Galileo & SBAS
Versatile handheld
• Camera, compass, altimeter
• Meets military standards
• Optimised for GeoMax
GNSS
Zenith25 Pro Series
Laser Rotator
ZEL400 Series
Compatta
• Radio UHF Integrata
• Modulo GSM/GPRS Integrato
• Memoria Interna Extra Large
Fisso
• IP67 resistente a polvere
e acqua
• Design Robusto
• Professionale
GNSS
Zenith10 & 20 Series
GeoMax Laser Rotator
ZLT300/200 Series
Works when you do
GeoMax Laser Rotator
ZEL400 Series
Completo
• 60 Satelliti Tracciati
Simultaneamente
• GNSS: GPS, Glonass,
Galileo, BeiDou
• NovAtel AdVance®
Total Station
Zoom20 Pro Series
Total Station
Zipp20 Open
WinCE® Series
GeoMax Automatic Level
ZAL300 Series
Digital Level
ZDL700 Series
Digital Theodolite
Zipp02
GeoMax Cable
Locating System
Copyright GeoMax AG. Illustrations, descriptions and
technical specifications are not binding and may change.
Printed in Germany / 10.2014 / 768325en
GeoMax
www.geomax-positioning.com
info@geomax-positioning.com
Multifunctional Keyboard
• Direct Access to Apps
• Fast Navigation
• Brilliant Readability
Total Station
Zipp10 Pro Series
GeoMax Automatic Level
ZAL100 Series
Automatic Level
ZAL300 Series
GeoMax Cable Locating System
Laser Rotator
ZLT300/200 Series
Performance, Robustness
• 250 m Non-Prism Range
• Coaxial Visible Laserbeam
• Sealed Durable Housing
Totally featured
• 3.5’’ colour & touch display
• 400 m non-prism range
• Coaxial visible laser beam
GeoMax Digital Level
ZDL700 Series
Works when you do
Extremely rugged
• IP68 dust and waterproof
• Withstands a 2 m drop
• Vibration resistant
Total Station
Zoom30 Pro Series
ZENITH10 & 20
Ricevitore GNSS
Serie Zenith10 & Zenith20
ZENITH25 PRO
GNSS Receiver
Zenith25 Pro Series
Easy Connectivity
• USB Memory Stick
• Bluetooth® Transfer
• Plug ’n Play Technology
Totally connected
• Integrated Bluetooth®
• USB memory stick
• Plug and Play technology
ZIPP10 PRO
Easy Connectivity
• USB Memory Stick
• Bluetooth® Transfer
• Plug ’n Play Technology
Easy Connectivity
• USB Memory Stick
• Fast & Easy Data Transfer
• Plug ’n Play Technology
Works when you do
Powerful Handheld
• Inbuilt Camera (5 M Pixel)
• Compass & Altimeter
• Long-range Bluetooth®
Highest Functionality
• NavLight™ Alignment Aid
• 600m Non-Prism Range
• 3 mm + 2 ppm Reflectorless
Totally open Windows® CE
• Supports any field software
• Open for own development
• Personalise your system
ZIPP20
ZIPP10
Colour Touch Screen
• Large 3.5″ Q-VGA Display
• Fast Navigation
• Brilliant Readability
Manual Total Station
Zipp10 Pro Series
ZAL300
Long Range Bluetooth
• High-Speed Data Link
• Reliable Connectivity
• License Free
Colour- & Touchscreen
• Large 3.5″ Q-VGA Display
• Fast Navigation
• Brilliant Readability
Works when you do
Superior accXess10 EDM
• > 1,000 m Non-Prism Range
• > 10,000 m Prism Range
• Pin Size Laser Beam
Manual Total
GeoMax
TotalStation
Station
Zipp10 Series
Zipp20
– Open WinCE® Series
EZiSYSTEM
STReAM360
• S cout – Auto Find
• TR ack – Auto Tracking
• A i M – Auto Targeting
Manual Total Station
Zoom30 Pro Series
ZOOM30 PRO
Manual Total Station
Zoom35 Pro Series
ZOOM35 PRO
Robotic Total Station
Zoom80 Series
Automatic Level
ZAL100 Series