D
Small Tool Instruments
Calipers
Height Gages
Depth Gages
INDEX
Digimatic Caliper
Calipers
Super Caliper-Solar Powered
ABSOLUTE Solar Caliper
ABSOLUTE Coolant Proof Caliper
ABSOLUTE Digimatic Caliper
Dial Caliper
Vernier Caliper
ABSOLUTE Digimatic & Vernier Caliper
Long Jaw Vernier Caliper
ABSOLUTE Digimatic Caliper
Digimatic Carbon Fiber Caliper
ABSOLUTE Coolant Proof Carbon Fiber Caliper
ABSOLUTE Back-Jaw Centerline Caliper
Offset Caliper
Offset Centerline Caliper
Point Caliper
Blade Type Caliper
Neck Caliper
Tube Thickness Caliper
ABSOLUTE Low Force Caliper
ABSOLUTE Snap Caliper
Scribing Caliper
ABSOLUTE Inside Caliper
MyCAL-Lite
Center Line Gage
Depth Base Attachment
Quick Guide to Precision Measuring
Instruments -Calipers
Digimatic Height Gages
Digimatic Height Gage
Dial Height Gage
ABSOLUTE Digimatic Height Gage
Vernier Height Gage
Carbide-Tipped Scriber
Optional Accessories for Height Gage
CERA Caliper Checker
Linear Height LH-600E
QM-Height
Depth Gages
Depth Micrometer
Depth Micro Checker
ABSOLUTE Digimatic Depth Gage
Vernier Depth Gage
ABSOLUTE Digimatic Depth Gage
Dial Depth Gage
Extension Bases
ABSOLUTE Digimatic/Dial Depth Gage
Tire Tread Depth Gage
Digimatic
Height Gages
Linear Height
Depth Gages
ABSOLUTE
Digimatic Caliper
ABSOLUTE
Coolant Proof Caliper
SuperCaliper
ABSOLUTE
Digimatic Offset Caliper
Digimatic Height
Gage
D-1
D-2
D-3
D-4,5
D-6,7
D-8,9
D-10-14
D-15
D-16
D-17
D-18,19
D-20
D-21
D-22
D-23
D-24
D-25
D-26
D-27
D-28
D-28
D-29
D-30,31
D-32
D-33
D-33
D-34-36
D-37,38
D-39
D-40,41
D-42,43
D-44
D-44
D-45
D-46,47
D-48,49
D-50,51
D-51
D-52
D-53,54
D-54
D-55
D-55
D-56,57
D-58
Super Caliper-Solar Powered
SERIES 500 — No battery or origin reset needed for IP67 Digital Caliper
FEATURES
UÊ7œÀ`½ÃÊ՘ˆµÕiIÊ܏>À‡«œÜiÀi`Ê-Õ«iÀÊ
Caliper that is eco-friendly with no battery.
UÊ7ˆÌ…ʘœÊ>˜˜œÞˆ˜}ʜÀˆ}ˆ˜ÊÀiÃ̜À>̈œ˜Ê
necessary, a measurement can be started
any time and there is no restriction on
operating speed.
Ê IVVœÀ`ˆ˜}Ê̜ʈÌÕ̜ޜʈ˜ÛiÃ̈}>̈œ˜Êˆ˜Ê>˜Õ>ÀÞ]ÊÓääx
UÊ/…iʈ“«>VÌÊÀiÈÃÌ>˜ViʜvÊ̅iÊ`ˆÃ«>ÞÊ՘ˆÌÊ
>ÃÊLii˜Êˆ˜VÀi>Ãi`ÊvœÀʈ“«ÀœÛi`ÊÕÃ>LˆˆÌÞÊ
in workshop conditions.
UÊ*ÈÇÊ«ÀœÌiV̈œ˜Ê>ÃÃÕÀiÃÊÜ>ÌiÀ«ÀœœvÊ
reliability.
UÊ/…ˆÃÊ-Õ«iÀÊ
>ˆ«iÀÊÕÃiÃÊVœ“«œ˜i˜ÌÃÊ̅>ÌÊ
do not contain harmful substances and is
Vœ“«>̈LiÊ܈̅Ê,œ-ʈÀiV̈Ûið
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
Insufficient
illumination state
Improvement in surface finish of beam
œ˜Ûi˜Ìˆœ˜>
Sufficient
illumination state
Super Caliper
No need for
origin set up
16.78mm
Direction of the length
Direction of the length
Ra: 0.126µm
Ra: 0.07µm
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜ÃÊ
Resolution: .0005"/0.01mm or 0.01mm
Repeatability: .0005” / 0.01mm
Display:
LCD
Length standard: ABSOLUTE electromagnetic induction linear
encoder
Max. response speed: Unlimited
>ÌÌiÀÞ\Ê
-œ>ÀÊL>ÌÌiÀÞI
ÕÃÌÉ7>ÌiÀÊ«ÀœÌiV̈œ˜ÊiÛi\Ê*ÈÇ
I
>˜ÊLiÊÕÃi`ÊVœ˜Ìˆ˜ÕœÕÏÞÊ>LœÛiÊÈäʏÕÝÊ>“Lˆi˜ÌʈÕ“ˆ˜>̈œ˜°
Function
Origin-set, ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
500-784
IP67 protection level
iÛiÊÈ\Ê
iÛiÊÇ\Ê
SPECIFICATIONS
Inch/Metric
Metric
Range
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
Order No.
500-776
500-774*
500-777
500-775*
Accuracy
±0.02mm
±0.02mm
±0.02mm
±0.02mm
I7ˆÌ…œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
Range
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
Order No.
500-786
500-784*
500-787
500-785*
Accuracy
±.001”
±.001”
±.001”
±.001”
Resolution
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
£“
I7ˆÌ…œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
About the charge function (Super Caliper)
DIMENSIONS AND MASS
Unit: mm
V
`
L
>
ÕÃ̇̈}…Ì
No ingress of dust.
*ÀœÌiVÌi`Ê>}>ˆ˜ÃÌÊ̅iÊivviVÌÃʜvÊÌi“«œÀ>ÀÞÊ
immersion in water.
˜}ÀiÃÃʜvÊÜ>ÌiÀʈ˜ÊµÕ>˜ÌˆÌˆiÃÊV>ÕȘ}ʅ>À“vՏÊ
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time
(30 min.).
Range
0 - 6” / 0 - 150mm
0 - 8” / 0 - 200mm
Jaw thickness: 3.5mm
D-2
L
233
290
a
21
24.5
b
16.5
20
c
40
50
d
16
16
Mass (g)
180
210
Thiʓˆ˜ˆ“ՓʈÕ“ˆ˜>̈œ˜ÊÀiµÕˆÀi`ʈ˜Ê̅iÊ՘V…>À}i`ÊÃÌ>ÌiʈÃÊ
60 lux. ÃÊŜܘʈ˜Ê̅iÊÌ>Liʼ-Ê<ʙ££äÊÀ̈wVˆ>ÊÕ“ˆ˜>̈œ˜Ê˜Ìi˜ÃˆÌÞÊ-Ì>˜`>À`½]Ê̅ˆÃÊ-Õ«iÀ Caliper can be used
܈̅œÕÌÊ«ÀœLi“Ãʈ˜Ê>ʘœÀ“>ÊܜÀŽÊi˜ÛˆÀœ˜“i˜Ì°
The charge function allows the operator to use this Super
>ˆ«iÀÊ܈̅œÕÌʈ˜ÌiÀÀի̈˜}ÊܜÀŽÊiÛi˜ÊˆvÊ̅iÊ>“Lˆi˜ÌÊ
ˆÕ“ˆ˜>̈œ˜ÊˆÃÊÌi“«œÀ>ÀˆÞʈ˜ÃÕvwVˆi˜Ì°
UʘÊ̅iÊvՏÞÊV…>À}i`ÊÃÌ>ÌiÊ̅ˆÃÊ-Õ«iÀÊ
>ˆ«iÀÊV>˜Êœ«iÀ>ÌiÊ
vœÀÊ>««ÀœÝˆ“>ÌiÞÊ>˜Ê…œÕÀʈ˜Ê>˜Êi˜ÛˆÀœ˜“i˜ÌʜvÊxäÕÝÊ
illumination (less than the minimum necessary illumination
intensity).
UÊ/…iÊ̈“iʘiViÃÃ>ÀÞÊvœÀÊvՏÊV…>À}iÊ`ˆvviÀÃ]Ê`i«i˜`ˆ˜}ʜ˜Ê
the charging conditions. If this Super Caliper is left unused
in an illumination of 500 lux (usual for manufacturing
i˜ÛˆÀœ˜“i˜Ìî]ʈÌÊÌ>ŽiÃÊ>««ÀœÝˆ“>ÌiÞʜ˜iʅœÕÀÊ̜Ê
reach full charge.
Mitutoyo's Absolute Solar Digimatic Caliper
ÀiÌ>ˆ˜ÃʈÌÃʜÀˆ}ˆ˜Ê«œˆ˜ÌÊiÛi˜Ê̅iÊ`ˆÃ«>ÞÊÌÕÀ˜ÃÊ
off for the entire life of the caliper. At 60
Lux and up the ABSOLUTE solar caliper is
turned on ready to start measurement.
FEATURES
UÊ œÊ“œÀiÊÀi«i>Ìi`ÊâiÀœÊÃiÌ̈˜}ÊV>ÕÃi`ÊLÞÊ
low light intensity.
UÊ>À`‡Vœ>Ìi`Ê܏>ÀÊ«>˜iÊvœÀʈ˜VÀi>Ãi`Ê
durability.
UÊ œÊvi>ÀÊvœÀʜÛiÀëii`ÊiÀÀœÀð
UÊ7ˆÌ…Ê̅ՓLÊÀœiÀ°
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
500-474
Origin-set, Data hold, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
959143:
959149:
959150:
Data hold unit (SPC output model only)
SPC cable with data switch (40” / 1m)
SPC cable with data switch (80” / 2m)
Order No.
500-443
500-453*
500-444
500-454*
500-445
500-455*
Range
0 - 100mm
0 - 100mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
Accuracy
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.02mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
ø1.9mm round depth bar
ø1.9mm round depth bar
Accuracy
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
Resolution
Remarks
.0005” / 0.01mm .075” round depth bar
.0005” / 0.01mm .075” round depth bar
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
I܈̅œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
Inch/Metric
Range
0 - 4" / 0 - 100mm
0 - 4" / 0 - 100mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
Order No.
500-463
500-473*
500-464
500-474*
500-465
500-475*
I܈̅œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
DIMENSIONS AND MASS
Unit: mm
£È
Function
Metric
V
I
>˜ÊLiÊÕÃi`ÊVœ˜Ìˆ˜ÕœÕÏÞÊ>LœÛiÊÈäʏÕÝÊ>“Lˆi˜ÌʈÕ“ˆ˜>̈œ˜°
SPECIFICATIONS
L
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜ÃÊ
Resolution: .0005”/0.01mm or 0.01mm
Repeatability: .0005” / 0.01mm
Display:
LCD
Length standard:ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
>ÌÌiÀÞ\Ê
-œ>ÀÊL>ÌÌiÀÞI
Range
0 - 4" / 0 - 100mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
>
Technical Data
D-3
L
182
233
290
a
40
40
50
b
21
21
24.5
c
16.5
16.5
20
Mass (g)
125
150
180
ABSOLUTE Coolant Proof Caliper
SERIES 500 — with Dust/Water Protection Conforming to IP67 Level
FEATURES
UÊ
>˜ÊLiÊÕÃi`ʈ˜ÊܜÀŽÃ…œ«ÊVœ˜`ˆÌˆœ˜ÃÊ
exposed to coolant, water, dust or oil.
UÊ>ÃÞÊ̜ÊÕÃiʇʘœÊ˜ii`Ê̜Ê܈«iʜÀÊVi>˜Ê̅iÊ
scale.
UÊ`Û>˜Vi`Ê`iÈ}˜ÊÃÌޏˆ˜}°
UʘVœÀ«œÀ>ÌiÃÊ>L܏ÕÌiʓi>ÃÕÀi“i˜ÌÊ
system.
UÊÕ̜“>̈VÊ«œÜiÀ‡œ˜Éœvv°
UÊ>Ì>ʜÕÌ«ÕÌÊv՘V̈œ˜°
UÊ7ˆÌ…Ê̅ՓLÊÀœiÀ°
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
500-752-10
500-763-10
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã
Resolution: .0005"/0.01mm or 0.01mm
Repeatability: .0005” / 0.01mm
Display:
LCD
Length standard: ABSOLUTE electromagnetic induction
linear encoder
Max. response speed: Unlimited
>ÌÌiÀÞ\Ê
-,{{Ê­£Ê«V°ÉÓÊ«VÃI®]Ê938882
Battery life: Approx. 3 years under normal use
Ê
­£ÊÞi>À\ʜÛiÀÊ£Ó»ÊÊÉÊÎä䓓ʓœ`iÃ®
ÕÃÌÉ7>ÌiÀÊ«ÀœÌiV̈œ˜ÊiÛi\Ê*ÈÇ
IäʇÊÎä䓓ʓœ`i
Function
Built-in ABS (absolute) scale means that these calipers are ready to use immediately after power-on without
origin resetting. It’s as easy as vernier caliper measurements.
Origin-set, Zero-setting, Automatic power on/off, Data
output, ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
Connecting cable for U-Wave-T
02AZD790A: SPC cable for U-Wave (160mm)
*œÜiÀÊ"
*œÜiÀÊ"
£È°În
œÊœÀˆ}ˆ˜
ÀiÃiÌ̈˜}
05CZA624
iÀ̈wV>Ìiʜvʈ˜Ã«iV̈œ˜
i>ÃÕÀi“i˜ÌÊ`>Ì>ʜÕÌ«ÕÌÊv՘V̈œ˜ÊˆÃÊ>Û>ˆ>LiÊ
with a water-resistant SPC cable.
D-4
Air leakage detection system used for
water-proof testing
i˜iÀ>Þ]Ê>ˆÀʏi>Ž>}iÊÌiÃÌÃÊ>ÀiÊ«iÀvœÀ“i`Ê̜ÊiÛ>Õ>ÌiÊÜ>ÌiÀÊ
resistance. Testing begins by placing a measuring tool into
̅iÊV>«ÃՏi°Ê iÝÌ]Ê>ˆÀÊ܈̅ÊiµÕˆÛ>i˜ÌÊ«ÀiÃÃÕÀiʈÃÊÃÕ««ˆi`Ê
̜Ê̅iÊV>«ÃՏiÊ>˜`Ê̅iʓ>ÃÌiÀ]Ê̅i˜Ê̅iÊÛ>ÛiÃÊ>ÀiÊVœÃi`°ÊvÊ
none of the air in the capsule seeps into the measuring tool,
̅iÊV>«ÃՏi½ÃÊ>ˆÀÊ«ÀiÃÃÕÀiÊ܈ÊÀi“>ˆ˜ÊiµÕ>Ê̜Ê̅>Ìʈ˜Ê̅iÊ
master, and the differential pressure gage will continue to
«œˆ˜ÌÊ̜Ê̅iÊVi˜ÌiÀ°ÊœÜiÛiÀ]ʈvÊܓiÊ>ˆÀÊ`œiÃÊÃii«Êˆ˜ÌœÊ̅iÊ
measuring tool, it will create an air pressure difference in the
amount indicated by the differential pressure gage. Thus,
detection of air pressure differences is used as a criterion for
Õ`}ˆ˜}ʏi>Ž>}i°ÊÛiÀÞÊȘ}iÊ՘ˆÌʜvÊ̅iÊ-Ê
œœ>˜ÌÊ*ÀœœvÊ
calipers and Coolant Proof micrometer is tested this way for
>ˆÀʏi>Ž>}iÊ̜ʅi«Êi˜ÃÕÀiÊ«Àœ`ÕVÌʵÕ>ˆÌÞ°
Air
Valve
Valve
Master
Capsule
Differential
pressure gage
SPECIFICATIONS
Metric
Range
0-150mm
0-150mm
0-150mm
0-150mm
0-150mm
0-200mm
0-200mm
0-200mm
0-200mm
0-300mm
0-300mm
IP67 model
Order No.
500-702-10*
500-712-10
500-719-10
500-721-10
500-723-10
500-703-10*
500-713-10
500-722-10
500-724-10
500-704-10*
500-714-10
Accuracy
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.03mm
+/-0.03mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
dia. 1.9mm rod depth bar
carbide-tipped jaws for ID measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for ID measurement
carbide-tipped jaws for OD & ID measurement
I܈̅œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
Inch/Metric
Resolution
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
Remarks
.075” rod depth bar
.075” rod depth bar
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for OD & ID measurement
I܈̅œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
DIMENSIONS AND MASS
Unit: mm
i
£“
Accuracy
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.0015”
+/-.0015”
V
iÛiÊÇ\Ê
ÕÃ̇̈}…Ì
No ingress of dust.
*ÀœÌiVÌi`Ê>}>ˆ˜ÃÌÊ̅iÊivviVÌÃʜvÊÌi“«œÀ>ÀÞÊ
immersion in water.
˜}ÀiÃÃʜvÊÜ>ÌiÀʈ˜ÊµÕ>˜ÌˆÌˆiÃÊV>ÕȘ}ʅ>À“vՏÊ
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time (30
min.).
>
iÛiÊÈ\Ê
L
IP67 protection level
IP67 model
Order No.
500-752-10*
500-762-10
500-768-10*
500-769-10
500-731-10*
500-735-10
500-733-10*
500-737-10
500-753-10*
500-763-10
500-732-10*
500-736-10
500-734-10*
500-738-10
500-754-10*
500-764-10
Range
0-6”/0-150mm
0-6”/0-150mm
0-6”/0-150mm
0-6”/0-150mm
0-6”/0-150mm
0-6”/0-150mm
0-6”/0-150mm
0-6”/0-150mm
0-8”/0-200mm
0-8”/0-200mm
0-8”/0-200mm
0-8”/0-200mm
0-8”/0-200mm
0-8”/0-200mm
0-12”/0-300mm
0-12”/0-300mm
Range
0 - 6” / 0 - 150mm
0 - 8” / 0 - 200mm
0 - 12” / 0 - 300mm
D-5
L
233
290
404
a
40
50
64
b
21
24.5
27.5
c
16.5
20
22
e
16
16
20
Mass (g)
168
198
350
ABSOLUTE Digimatic Caliper
SERIES 500 — with Exclusive ABSOLUTE Encoder Technology
Mitutoyo's absolute Digimatic Caliper is
the next generation of electronic calipers.
It keeps track of its origin point once set.
7…i˜iÛiÀÊÌÕÀ˜i`ʜ˜]Ê̅iʏ>À}iÊ
ÊÃVÀii˜Ê
displays the actual slider position ready
to start measurement. No more repeated
zero setting is necessary with the absolute
encoder technology as well as no more care
vœÀʜÛiÀëii`ÊiÀÀœÀð
High quality guide surface finish for smooth
slider movement
œ˜Ûi˜Ìˆœ˜>
ABS Digimatic Caliper
Direction of the length
Direction of the length
Ra: 0.126µm
Ra: 0.07µm
FEATURES
UÊ>À}iÊ>˜`ÊVi>ÀÊ
ÊÀi>`œÕÌ°
UÊ/…iÊ<,"É-ʎiÞÊ>œÜÃÊ̅iÊ`ˆÃ«>ÞÊ̜Ê
be Zero-Set at any slider position along
the scale for incremental comparison
measurements. This switch will also allow
return to the absolute (ABS) coordinate
and display of the true position from the
origin point (usually jaws-closed point).
UÊ>Ì>ʜ`Ê1˜ˆÌÊ­™x™£{ήʈÃʜ«Ìˆœ˜>°
UÊ
>ÀLˆ`i‡Ìˆ««i`ʍ>ÜÊÌÞ«iÊV>ˆ«iÀÃÊ>ÀiÊ>ÃœÊ
>Û>ˆ>Li°
UÊ/…Õ“LÊÀœiÀʈ˜VÕ`i`ʜ˜Þʜ˜ÊV>ˆ«iÀÃÊÕ«Ê
to and including 12” or 300mm.
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°Ê
Except 40” / 1000mm supplied in
wooden case.
The new Mitutoyo ABS Digimatic Caliper line with
iÝVÕÈÛiÊ"-ÊÃi˜ÃœÀÊÌiV…˜œœ}Þ°Ê/…iÊ«>Ìi˜Ìi`Ê
`Û>˜Vi`Ê"˜ÃˆÌiÊ-i˜ÃœÀÊ­"-®ÊœvviÀÃʈ“«ÀœÛi`Ê
measurement dependability by increasing resistance
to harsh workshop conditions.
500-197-30
500-151-30
Technical Data
DIMENSIONS AND MASS
`
L
V
Unit: mm
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã
Resolution: .0005”/0.01mm or 0.01mm
Repeatability: .0005”/ 0.01mm
Display:
LCD
Length standard:
ABSOLUTE electromagnetic induction type linear encoder
(200mm and smaller models)
ABSOLUTE electrostatic capacitance type linear encoder
(300mm and larger models)
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
V
Function
V
L
>
Range
0 - 4” / 0 - 100mm
0 - 6” / 0 - 150mm
0 - 8” / 0 - 200mm
0 - 12” / 0 - 300mm
L
182
233
290
403
a
40
40
50
64
`
>
L
b
21
21
24.5
27.5
c
16.5
16.5
20
22
d
16
16
16
20
Mass (g)
143
168
198
350
V
L
`
Origin-set, Zero-setting, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
959143:
Data hold unit
959149:
SPC cable with data switch (40” / 1m)
959150:
SPC cable with data switch (80” / 2m)
Connecting cable for U-Wave-T
02AZD790C: SPC cable for U-Wave (160mm)
>
>
`
959143
Range
0 - 18” / 0 - 450mm
0 - 24” / 0 - 600mm
0 - 40” / 0 - 1000mm
D-6
L
630
780
1240
a
90
90
130
b
47
47
61
c
38
38
50
d
25
25
32
Mass (g)
1170
1350
3300
959149
500-506-10
500-502-10
500-501-10
500-500-10
SPECIFICATIONS
Metric
Range
0 - 100mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 450mm
0 - 600mm
0 - 1000mm
Order No.
500-150-30
500-151-30
500-154-30
500-155-30
500-158-30
500-152-30
500-156-30
500-157-30
500-153
500-500-10
500-501-10
500-502-10
Accuracy
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.03mm
±0.05mm
±0.05mm
±0.07mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
ø1.9mm rod depth bar
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
ø1.9mm rod depth bar
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
7ˆÌ…œÕÌÊ/…Õ“LÊ,œiÀ
7ˆÌ…œÕÌÊ/…Õ“LÊ,œiÀ
7ˆÌ…œÕÌÊ/…Õ“LÊ,œiÀ
Inch/Metric
Range
0 - 4" / 0 - 100mm
0 - 4" / 0 - 100mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
Order No.
500-170-30
500-195-30*
500-171-30
500-174-30
500-175-30
500-178-30
500-196-30*
500-159-30*
500-160-30*
500-172-30
500-176-30
500-177-30
500-197-30*
500-163-30*
500-164-30*
500-173
500-167
500-168
500-193*
500-165*
500-166*
500-505-10
500-506-10
500-507-10
Accuracy
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.001”
±.0015”
±.0015”
±.0015”
±.0015”
±.0015”
±.0015”
±.002”
±.002”
±.003”
Resolution
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
I܈̅œÕÌÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ
D-7
Remarks
.075" rod depth bar
.075" rod depth bar
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
.075" rod depth bar
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
7ˆÌ…œÕÌÊ/…Õ“LÊ,œiÀ
7ˆÌ…œÕÌÊ/…Õ“LÊ,œiÀ
7ˆÌ…œÕÌÊ/…Õ“LÊ,œiÀ
Dial Caliper
SERIES 505
FEATURES
UÊ iÜÊ`iÈ}˜i`Ê`ˆ>Ê“œÛi“i˜ÌÊvœÀÊՏÌÀ>Ê
smooth sliding and high shock protection.
Uʓ«ÀœÛi`Êw˜ˆÃ…Êœ˜Êψ`ˆ˜}ÊÃÕÀv>ViÃÊvœÀÊ
œ˜}iۈÌÞ°
UÊ iÜÊv>ViÊvœÀÊi>ÈiÀÊÀi>`ˆLˆˆÌÞ°
UÊ,i“œÛ>ÊœvÊ/ˆ ÊVœ>̈˜}ʜ˜Êψ`ˆ˜}ÊÃÕÀv>ViÃÊ
܈̅œÕÌÊÃ>VÀˆwVˆ˜}ÊÜi>Àʏˆvi°
UʜVŽÊÃVÀiÜÊvœÀÊ`ˆ>ÊLiâiÊ>˜`ÊvœÀʅœ`ˆ˜}Ê̅iÊ
sliding jaw position.
UÊ
>˜Ê“i>ÃÕÀiÊ"]Ê]Ê`i«Ì…]Ê>˜`ÊÃÌi«Ã°
Uʜ`iÃÊ>Û>ˆ>LiÊ܈̅ÊV>ÀLˆ`i‡Ìˆ««i`Ê"Ê
and ID jaws.
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
505-746
°£ää»Ê«iÀʜ˜iÊÀiۜṎœ˜
505-742
°Óää»Ê«iÀʜ˜iÊÀiۜṎœ˜
505-745
£““Ê«iÀʜ˜iÊÀiۜṎœ˜
505-732
SPECIFICATIONS
Metric
Range
0-150mm
0-200mm
Metric
Range
0-150mm
0-150mm
0-150mm
0-200mm
0-300mm
ӓ“Ê«iÀʜ˜iÊÀiۜṎœ˜
£““Ê*iÀÊ"˜iÊ,iۜṎœ˜
Order No.
505-732
505-733
Accuracy
+/-0.03mm
+/-0.03mm
Graduation
0.01mm
0.01mm
Remarks
—
—
Graduation
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
Remarks
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
—
ӓ“Ê*iÀÊ"˜iÊ,iۜṎœ˜
Order No.
505-730
505-734
505-735
505-731
505-745
Accuracy
+/-0.03mm
+/-0.03mm
+/-0.03mm
+/-0.03mm
+/-0.04mm
D-8
SPECIFICATIONS
Inch
"Quadri" (4-way) Measurement
1. Outside measurement
°£»Ê*iÀÊ"˜iÊ,iۜṎœ˜
Order No.
505-742
505-742-51
505-742-52
505-742-53
505-745-54
505-745-55
505-745-56
505-736
505-738
505-743
505-737
505-739
505-746
505-747
505-748
Range
0-6”
0-6”
0-6”
0-6”
0-6”
0-6”
0-6”
0-6”
0-6”
0-8”
0-8”
0-8”
0-12”
0-12”
0-12”
Accuracy
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.001”
+/-.002”
+/-.002”
+/-.002”
+/-.002”
+/-.002”
+/-.002”
Graduation
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
Remarks
Blue Dial Face
Purple Dial Face
Green Dial Face
Red Dial Face
Orange Dial Face
Black Dial Face
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID
2. Inside measurement
Inch
3. Step measurement
°Ó»Ê*iÀÊ"˜iÊ,iۜṎœ˜
Order No.
505-740
505-744
505-741
505-749
505-750
Range
0-6”
0-6”
0-8”
0-12”
0-12”
Accuracy
+/-.001”
+/-.001”
+/-.002”
+/-.002”
+/-.002”
Graduation
.001”
.001”
.001”
.001”
.001”
Remarks
—
Carbide-tipped jaws for OD measurement
—
—
Carbide-tipped jaws for OD measurement
DIMENSIONS AND MASS
4. Depth measurement
Unit: mm
>
`
V
L
Range
0 - 4"/ 0 - 100mm
0 - 6"/ 0 - 150mm
0 - 8"/ 0 - 200mm
0 - 12"/ 0 - 300mm
D-9
L
180
231
288
403
a
40
40
50
64
b
21
21
24.5
27.5
c
16.5
16.5
20
22
d
16
16
16
20
Mass (g)
150
175
185
370
Vernier Caliper
SERIES 530 — Standard Model
FEATURES
UÊ
>˜Ê“i>ÃÕÀiÊ"Ê­œÕÌÈ`iÊ`ˆ>“iÌiÀ®]ÊÊ
(inside diameter), depth, and steps.
UÊ/…iÊÓ>ÊÛiÀ˜ˆiÀÊv>ViÊ>˜}iÊ­£{c®Ê«ÀœÛˆ`iÃÊ
easy reading.
UÊÕ>ÊÀi>`ˆ˜}ÊÃV>iÃʜ˜ÊÛiÀ˜ˆiÀ°Ê
(metric/inch and inch models only)
UʜVŽÊÃVÀiÜÊvœÀʅœ`ˆ˜}Ê̅iÊψ`ˆ˜}ʍ>ÜÊ
position.
UÊ
>ÀLˆ`i‡Ìˆ««i`ʍ>ÜÊÌÞ«iÊV>ˆ«iÀÃÊ>ÀiÊ>ÃœÊ
>Û>ˆ>Li°
UÊ-Õ««ˆi`Ê܈̅Êۈ˜ÞÊ…œÃÌiÀʈ˜ÊwÌÌi`ÊV>À̜˜°Ê
Except 24” / 600mm models are carton
only. 40” / 1000mm supplied in wooden
case.
£{c
530-101
530-109
Carbide-tipped
Carbide-tipped jaw type
DIMENSIONS AND MASS
Unit: mm
`
V
L
>
Range
0 - 150mm
0 - 200mm
0 - 300mm
0 - 600mm
0 - 1000mm
D-10
L
229
288
403
780
1240
a
40
50
64
90
130
b
21
24.5
27.5
47
60
c
17
20.5
22
38
50
d
16
16
20
25
32
Mass (g)
143
180
335
1,300
3,300
Round depth bar type
SPECIFICATIONS
Metric
“Quadri” (4 way) Measurement
Measurement Applications
OD measurement
Order No.
530-102
530-101
530-320
530-335
530-122*
530-108
530-321
530-123*
530-109
530-322
530-124*
530-501**
530-502 **
Range
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
0 - 300mm
0 - 600mm
0 - 1000mm
Graduation
0.05mm
0.05mm
0.05mm
0.05mm
0.02mm
0.05mm
0.05mm
0.02mm
0.05mm
0.05mm
0.02mm
0.05mm
0.05mm
Remarks
ø 1.9mm Depth bar
—
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
High accuracy model
—
Carbide-tipped jaws for OD measurement
High accuracy model
—
Carbide-tipped jaws for OD measurement
High accuracy model: ±0.04mm
—
—
IÀ>`Õ>̈œ˜\Êä°äӓ“
II œÊ`i«Ì…Ê“i>ÃÕÀˆ˜}ÊL>ÀÊ
Metric/Inch
ID measurement
Accuracy
±0.05mm
±0.05mm
±0.05mm
±0.05mm
±0.03mm
±0.05mm
±0.05mm
±0.03mm
±0.08mm
±0.08mm
±0.04mm
±0.1mm
±0.15mm
with metric/inch dual scale
Range
Order No.
Accuracy
0 - 150mm / 0 - 6”
0 - 150mm / 0 - 6”
0 - 150mm / 0 - 6”
0 - 200mm / 0 - 8”
0 - 200mm / 0 - 8”
0 - 300mm / 0 - 12”
0 - 300mm / 0 - 12”
530-104
530-316
530-312*
530-114
530-118*
530-115
530-119*
±0.05mm
±0.05mm
±0.03mm
±0.05mm
±0.03mm
±0.08mm
±0.04mm
Vernier Graduation
Lower Scale
Upper Scale
0.05mm
1/128"
0.05mm
1/128"
0.02mm
.001"
0.05mm
1/128"
0.02mm
.001"
0.05mm
1/128"
0.02mm
.001"
Remarks
—
—
High accuracy model
—
High accuracy model
—
High accuracy model
IÀ>`Õ>̈œ˜\Êä°äӓ“
Inch
with inch/inch dual scale
Range
Order No.
Accuracy
0 - 6"
0 - 8"
530-105
530-116
±.0015”
±.0015”
Vernier Graduation
Lower Scale Upper Scale
.001”
1/128"
.001”
1/128"
Step measurement
Depth measurement
D-11
Remarks
—
—
Vernier Caliper
SERIES 531 — with Thumb Clamp
“Quadri” (4 way) Measurement
FEATURES
UÊ/…iÊψ`iÀʓœÛiÃʜ˜ÞÊ܅i˜Ê̅iÊëÀˆ˜}Ê
loaded thumb clamp is depressed.
UÊ
>˜Ê“i>ÃÕÀiÊ"]Ê]Ê`i«Ì…]Ê>˜`ÊÃÌi«Ã
UÊ-Õ««ˆi`Ê܈̅Êۈ˜ÞÊ…œÃÌiÀʈ˜ÊwÌÌi`ÊV>À̜˜°
Thumb clamp
Measurement Applications
531-101
OD measurement
SPECIFICATIONS
Metric
Order No.
531-101
531-102
531-103
Range
0 - 150mm
0 - 200mm
0 - 300mm
Accuracy
±0.05mm
±0.05mm
±0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Remarks
—
—
—
ID measurement
Metric/Inch
with metric/inch dual scale
Order No. Accuracy
Graduation
Lower Scale Upper Scale
0 - 150mm / 0 - 6" 531-122
±0.05mm
0.05mm
1/128"
0 - 150mm / 0 - 6" 531-128
±0.03mm
0.02mm
.001”
0 - 200mm / 0 - 8” 531-108
±0.05mm
0.05mm
1/128"
0 - 200mm / 0 - 8” 531-129
±0.03mm
0.02mm
.001”
0 - 300mm / 0 - 12” 531-109
±0.08mm
0.05mm
1/128"
0 - 300mm / 0 - 12” 531-112
±0.04mm
0.02mm
.001”
Range
Remarks
܈̅ʈ˜V…É““ÊVœ˜ÛiÀȜ˜Ê>Li
High accuracy model
—
High accuracy model
—
High accuracy model
Step measurement
DIMENSIONS AND MASS
>
`
L
Unit: mm
Range
0 - 6"/ 0 - 150mm
0 - 8"/ 0 - 200mm
0 - 300mm
L
229
288
403
a
40
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
Mass (g)
142
175
360
Depth measurement
D-12
Vernier Caliper
SERIES 532 — with Fine Adjustment
“Quadri” (4 way) Measurement
Measurement Applications
FEATURES
UÊ*ÀœÛˆ`i`Ê܈̅Ê>Êw˜i‡>`ÕÃ̓i˜ÌÊV>ÀÀˆ>}iÊ
̜Êvii`Ê̅iÊψ`iÀÊw˜iÞ°
UÊ
>˜Ê“i>ÃÕÀiÊ"]Ê]Ê`i«Ì…]Ê>˜`ÊÃÌi«Ã°
UÊ-Õ««ˆi`Ê܈̅Êۈ˜ÞÊ…œÃÌiÀʈ˜ÊwÌÌi`ÊV>À̜˜°
532-101
OD measurement
SPECIFICATIONS
Metric
Order No.
532-101
532-102
532-103
Range
0 - 130mm
0 - 180mm
0 - 280mm
ID measurement
Metric/Inch
Accuracy
±0.03mm
±0.03mm
±0.04mm
Graduation
0.02mm
0.02mm
0.02mm
with metric/inch dual scale
Order No.
Range
0 - 130mm / 0 - 5” 532-119
0 - 180mm / 0 - 7” 532-120
0 - 280mm / 0 - 11” 532-121
Accuracy
Lower Scale
0.02mm
0.02mm
0.02mm
±0.03mm
±0.03mm
±0.04mm
Graduation
Upper Scale
.001"
.001"
.001"
DIMENSIONS AND MASS
Step measurement
Unit: mm
>
`
V
L
Range
0 - 5" / 0 - 130mm
0 - 7" / 0 - 180mm
0 - 11" / 0 - 280mm
Depth measurement
D-13
L
229
288
403
a
40
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
Mass (g)
165
202
395
Vernier Caliper
SERIES 160 — with Nib Style Jaws and Fine Adjustment
Technical Data
FEATURES
UÊ/…iʍ>ÜÃʅ>ÛiÊÀœÕ˜`ʓi>ÃÕÀˆ˜}Êv>ViÃÊvœÀÊ
accurate ID measurement.
UÊ7ˆÌ…Êw˜iÊ>`ÕÃ̓i˜ÌÊV>ÀÀˆ>}iÊ̜Êvii`Ê̅iÊ
ψ`iÀÊw˜iÞ°
UʘÈ`iÊ>˜`ʜÕÌÈ`iʓi>ÃÕÀi“i˜ÌÃÊV>˜ÊLiÊ
directly read from the upper and lower
ψ`iÀÊ}À>`Õ>̈œ˜Ã]ÊÀiëiV̈ÛiÞ°
UÊ-Õ««ˆi`Ê܈̅Êۈ˜ÞÊ…œÃÌiÀʈ˜ÊwÌÌi`ÊV>À̜˜°Ê
Except 12” / 300mm, 18” / 450mm and
Ó{»ÊÊÉÊÈä䓓Ê>ÀiÊwÌÌi`ÊV>À̜˜Êœ˜Þ°Ê"ÛiÀÊ
24” / 600mm supplied in wooden case.
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
À>`Õ>̈œ˜\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
160-101
160-116
SPECIFICATIONS
0 (10) - 300mm
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
160-127
160-128
160-101
160-104
160-110
160-113
±0.04mm
±0.05mm
±0.05mm
±0.07mm
±0.09mm
±0.12mm
Graduation
Lower Scale Upper Scale
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
Mass (g)
Graduation
Lower Scale Upper Scale
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
Mass (g)
450
1,200
2,600
3,500
4,850
10,200
Round surface of jaws for accurate ID
measurement
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Order No. Accuracy
0 (10) - 300mm / 0 (.3”) - 12"
0 (20) - 450mm / 0 (.5”) - 18"
0 (20) - 600mm / 0 (.5”) - 24"
0 (20) - 1000mm / 0 (1”) - 40"
0 (20) - 1500mm / 0 (1”) - 60"
0 (20) - 2000mm / 0 (1”) - 80"
160-150
160-151
160-153
160-155
160-157
160-159
±0.04mm
±0.05mm
±0.05mm
±0.07mm
±0.09mm
±0.12mm
450
1,200
1,400
3,500
4,850
10,200
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Inch
Order No.
Accuracy
0 (.3”) - 12"
0 (.5”) - 18"
0 (.5”) - 24"
0 (1”) - 40"
0 (1”) - 60"
0 (1”) - 80"
160-124
160-116
160-102
160-105
160-111
160-114
±.0015"
±.002"
±.002"
±.003"
±.004"
±.005"
Unit: mm
T
Graduation
Lower Scale Upper Scale
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
Mass (g)
Graduation
Lower Scale Upper Scale
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
.001”
0.02mm
Mass (g)
450
1,200
1,400
3,500
4,850
10,200
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Inch/Metric
L
e
with inch/inch dual scale
,>˜}iI
DIMENSIONS
d
with metric/inch dual scale
a
Metric/Inch
,>˜}iI
b
with metric/metric dual scale
Order No.
Accuracy
c
Metric
,>˜}iI
with inch/metric dual scale
,>˜}iI
Order No. Accuracy
0 (.3”) - 12" / 0 (10) - 300mm
0 (.5”) - 18" / 0 (20) - 450mm
0 (.5”) - 24" / 0 (20) - 600mm
0 (1”) - 40" / 0 (20) - 1000mm
0 (1”) - 60" / 0 (20) - 1500mm
0 (1”) - 80" / 0 (20) - 2000mm
160-125
160-119
160-103
160-106
160-112
160-115
±.0015"
±.002"
±.002"
±.003"
±.004"
±.005"
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
D-14
450
1,200
1,400
3,500
4,850
10,200
Range
0 - 12” / 0 - 300mm
0 - 18” / 0 - 450mm
0 - 24” / 0 - 600mm
0 - 40” / 0 - 1000mm
0 - 60” / 0 - 1500mm
0 - 80” / 0 - 2000mm
L
445
630
780
1240
1800
2300
a
95
125
125
172
212
220
b
75
100
100
140
180
180
c
12
18
18
24
30
30
d
20
25
25
32
32
40
e
10
14.8
14.8
17
19
23
T
3.8
6
6
8
8
12
ABSOLUTE Digimatic & Vernier Caliper
SERIES 550, 160 — with Nib Style Jaws
FEATURES
6iÀ˜ˆiÀ
}À>`Õ>̈œ˜
>ˆ˜ÊÃV>i
}À>`Õ>̈œ˜Ã
UÊ*>À>>݇vÀiiÊÛiÀ˜ˆiÀÊÃV>iÊÌÞ«iʈÃÊ>Û>ˆ>LiÊ
vœÀÊi>ÃÞÊ>˜`Ê«œÃˆÌˆÛiʓi>ÃÕÀi“i˜ÌÊ
(Series 160).
UÊ7ˆÌ…Ê-*
ʜÕÌ«ÕÌÊ­-iÀˆiÃÊxxä®°
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°ÊÝVi«ÌÊ{ä»ÉÊ
1000mm supplied in wooden case.
UÊ/…iÊÀœÕ˜`i`Êv>ViÃʜvÊ̅iʍ>ÜÃÊ>Àiʈ`i>ÊvœÀÊ
accurate ID (inside diameter) measurement.
UʘÈ`iÊ>˜`ʜÕÌÈ`iʓi>ÃÕÀi“i˜ÌÃÊV>˜ÊLiÊ
directly read from the upper and lower
slider graduations (Series 160).
UÊ7ˆÌ…Êw˜i‡>`ÕÃ̓i˜ÌÊV>ÀÀˆ>}iÊÌÞ«iʈÃÊ
>Û>ˆ>LiÊ­-iÀˆiÃÊ£Èä®°
*>À>iÊÃV>iÊv>ViÃ
Technical Data
160-131
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
550-311-10
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
Origin-set, Zero-setting, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories for Digital Model
959143:
959149:
959150:
05CZA624:
Data hold unit
SPC cable with data switch (40” / 1m)
SPC cable with data switch (80” / 2m)
SPC cable with data switch (40” / 1m) for IP67
model
05CZA625: SPC cable with data switch (80” / 2m) for IP67
model
SPECIFICATIONS
Metric
,>˜}iI
0 (10) - 200mm
0 (10) - 300mm
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
Digital model
Order No.
550-301-10
550-331-10
550-203-10II
550-205-10II
550-207-10II
Accuracy
±0.03mm
±0.03mm
±0.05mm
±0.05mm
±0.07mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Mass (g) Remarks
180
IP67
380
w/ offset/preset function for easy ID measurement, IP67
1,110
1,290
3,350
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜ÌÊÊÊÊÊIIœ`iÃÊ>ÀiʘœÌÊ*ÈÇÊÀ>Ìi`
Inch/Metric
Digital model
,>˜}iI
Order No.
0 (.4”) - 8" / 0 (10) - 200mm 550-311-10
0 (.4”) - 12" / 0 (10) - 300mm 550-341-10
Accuracy Resolution
Mass (g) Remarks
±.001" .0005” / 0.01mm 180
IP67
±.0015" .0005” / 0.01mm 380
w/ offset/preset function for easy ID
measurement, IP67
0 (.5”) - 18" / 0 (20) - 450mm 550-223-10II ±.002" .0005” / 0.01mm 1,110 —
0 (.5”) - 24" / 0 (20) - 600mm 550-225-10II ±.002" .0005” / 0.01mm 1,290 —
0 (1”) - 40" / 0 (20) - 1000mm 550-227-10II ±.003" .0005” / 0.01mm 3,350 —
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜ÌÊÊÊIIœ`iÃÊ>ÀiʘœÌÊ*ÈÇÊÀ>Ìi`
Metric
with metric/metric dual scale
,>˜}iI
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
Order No.
160-130
160-131
160-132
160-133
160-134
Accuracy
±0.10mm
±0.10mm
±0.15mm
±0.22mm
±0.28mm
Graduation
0.02mm
0.02mm
0.02mm
0.05mm
0.05mm
Mass (g)
1,100
1,300
3,350
4,850
10,000
Remarks
—
—
—
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
DIMENSIONS
d
L
Round surface of jaws for accurate ID
measurement
a
Unit: mm
b
( ): Digital models
T
D-15
Range
0 - 8"/ 0 - 200mm
0 - 12" / 0 - 300mm
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60” / 0 - 1500mm
0 - 80” / 0 - 2000mm
L
288 (290)
445
632
780
1240
1800
2300
a
60
75
100
100
140
180
180
b
8
12
18
18
24
30
30
d
16
20
25
25
32
32
40
T
3
3.8
6
6
8
8
12
Long Jaw Vernier Caliper
SERIES 534
FEATURES
U-Õ««ˆi`ʈ˜ÊwÌÌi`Êܜœ`i˜ÊV>Ãi°
Uʜ˜}ʍ>ÜÃÊvœÀʓi>ÃÕÀˆ˜}ʅ>À`‡Ìœ‡Ài>V…Ê
features.
534-110
534-114
SPECIFICATIONS
Metric
܈̅ʓiÌÀˆVɓiÌÀˆVÊ`Õ>ÊÃV>iÊ܈̅œÕÌÊw˜iÊ>`ÕÃ̓i˜Ì
Order No.
,>˜}iI
534-109
534-110
0 (10) - 300mm
0 (20) - 500mm
Accuracy
±0.07mm
±0.13mm
Graduation
Upper Scale
0.05mm
0.05mm
Mass (g)
Lower Scale
0.05mm
0.05mm
Graduation
Upper Scale
0.02mm
0.02mm
0.02mm
0.02mm
Mass (g)
Lower Scale
0.02mm
0.02mm
0.02mm
0.02mm
Graduation
Upper Scale
1/128”
.001”
1/128”
.001”
1/128”
.001”
1/128”
.001”
Mass (g)
Lower Scale
0.05mm
0.02mm
0.05mm
0.02mm
0.05mm
0.02mm
0.05mm
0.02mm
Graduation
Upper Scale
.001”
.001”
.001”
.001”
Mass (g)
Lower Scale
.001”
.001”
.001”
.001”
400
1,400
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Metric
with metric/metric dual scale
Order No.
,>˜}iI
534-113
534-114
534-115
534-116
0 (10) - 300mm
0 (20) - 500mm
0 (20) - 750mm
0 (20) - 1000mm
Accuracy
±0.04mm
±0.06mm
±0.08mm
±0.10mm
Technical Data
460
1,500
2,900
3,500
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
À>`Õ>̈œ˜\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Metric/Inch
with metric/inch dual scale
Order No.
Accuracy
,>˜}iI
0 (10) - 300mm / 0 (.3”) - 12"
0 (10) - 300mm / 0 (.3”) - 12"
0 (20) - 500mm / 0 (.8”) - 20"
0 (20) - 500mm / 0 (.8”) - 20"
0 (20) - 700mm / 0 (.8”) - 30"
0 (20) - 700mm / 0 (.8”) - 30"
0 (20) - 1000mm / 0 (.8”) - 40"
0 (20) - 1000mm / 0 (.8”) - 40"
534-101
534-105
534-102
534-106
534-103
534-107
534-104
534-108
±0.07mm
±0.04mm
±0.13mm
±0.06mm
±0.16mm
±0.08mm
±0.20mm
±0.10mm
460
460
1,500
1,500
2,900
2,900
3,500
3,500
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Inch
with inch/inch dual scale
Order No.
,>˜}iI
534-117
534-118
534-119
534-120
0 (.3”) - 12"
0 (.8”) - 20"
0 (.8”) - 30"
0 (.8”) - 40"
Accuracy
±.002"
±.003"
±.004"
±.004"
400
1500
2900
3500
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
DIMENSIONS
L
c
b
a
d
Unit: mm
e
Range
0 - 12” / 0 - 300mm
0 - 20” / 0 - 500mm
0 - 30” / 0 - 750mm
0 - 40” / 0 - 1000mm
T
D-16
L
445
682
995
1230
a
110
225
232
232
b
90
200
200
200
c
12
18.5
18.5
18.5
d
20
25
32
32
e
7
12
12
12
T
3.8
6
8
8
Round surface of jaws for accurate CD
measurement
ABSOLUTE Digimatic Caliper
SERIES 551 — with Nib Style and Standard Jaws
FEATURES
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VʅœÃÌiÀʈ˜ÊV>À̜˜°ÊÊ
18" / 450mm and larger supplied wooden
case.
UÊ/…iÊÀœÕ˜`i`Êv>ViÃʜvÊ̅iʍ>ÜÃÊ>Àiʈ`i>ÊvœÀÊ
accurate ID (inside diameter) measurement.
UÊ7ˆÌ…Ê-*
ʜÕÌ«ÕÌ°
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: 0.01mm or .0005"/0.01mm
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
551-311-10
Function of Digital Model
Origin-set, Zero-setting, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories for Digital Model
05CZA624: SPC cable with data switch (1m / 40”) IP67
05CZA625: SPC cable with data switch (2m / 80”) IP67
SPECIFICATIONS
Metric
Digital model
,>˜}iI
0 (10) - 200mm
0 (10) - 300mm
Order No.
551-301-10
551-331-10
0 (20) - 500mm
0 (20) - 750mm
0 (20) - 1000mm
551-204-10II ±0.06mm
551-206-10II ±0.06mm
551-207-10II ±0.07mm
Accuracy
±0.03mm
±0.04mm
Resolution
0.01mm
0.01mm
Mass (g) Remarks
180
IP67
380
with offset/preset function
for easy ID measurement, IP67
1,060 —
1,410 —
3,430 —
0.01mm
0.01mm
0.01mm
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜ÌÊÊIIʜ`iÃÊ>ÀiʘœÌÊ*ÈÇÊÀ>Ìi`
Inch/Metric
Digital model
,>˜}iI
Order No.
0 (.4”) - 8" / 0 (10) - 200mm 551-311-10
0 (.4”) - 12" / 0 (10) - 300mm 551-341-10
Accuracy
±.001"
±.002"
Resolution
Mass (g) Remarks
.0005” / 0.01mm 180
IP67
.0005” / 0.01mm 380
w/ offset/preset function for
easy ID measurement, IP67
.0005” / 0.01mm 1,060 —
.0005” / 0.01mm 1,410 —
.0005” / 0.01mm 3,430 —
0 (.5”) - 20" / 0 (20) - 500mm 551-224-10II ±.0025"
0 (.5”) - 30" / 0 (20) - 750mm 551-226-10II ±.0025"
0 (1”) - 40" / 0 (20) - 1000mm 551-227-10II ±.003"
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜ÌÊÊÊIIʜ`iÃÊ>ÀiʘœÌÊ*ÈÇÊÀ>Ìi`
DIMENSIONS
Series 551 / 533
R
c
c
b
b
a
a
d
Series 550 / 160
Unit: mm
Range
0 - 8" / 0 - 200mm
0 - 12" / 0 - 300mm
0 - 20" / 0 - 500mm
0 - 30" / 0 - 750mm
0 - 40" / 0 - 1000mm
a
60
90
150
150
150
b
43
68
115
115
115
c
8
10
15
15
20
d
30
40.1
56
56
56
R
T
Round surface of jaws for accurate ID
measurement
D-17
R
5
5
10
10
10
T
3
3.8
6
8
8
Digimatic Carbon Fiber Caliper
SERIES 552 — with optional jaw attachments
FEATURES
Uʈ}…ÌÜiˆ}…Ìʈ}ˆ“>̈VÊ
>ˆ«iÀÃÊ̅>ÌÊi“«œÞÊ
CFRP (Carbon Fiber Reinforced Plastics) in
the beam and jaws.
Uʈ}…ÞÊ`ÕÀ>LiÊ>˜`Êi>ÃÞÊ̜ʅ>˜`i°
UÊ/…iÊÀ>˜}iʜvÊ>««ˆV>̈œ˜ÃÊV>˜ÊLiÊiÝ«>˜`i`Ê
by using the optional attachments.
UʈÀiVÌÊÀi>`œÕÌʜvÊʓi>ÃÕÀi“i˜ÌÃÊvÀœ“Ê
̅iÊ
°Ê­"vvÃiÌÊÛ>ÕiÊV>˜ÊLiÊÃiÌÊi>ȏÞÊLÞÊ
pressing the Offset key.)
UÊ*ÀiÃiÌÊv՘V̈œ˜ÊvœÀÊÃiÌ̈˜}Ê>Ê`iÈÀi`Ê
starting point.
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°
UÊ-«iVˆ>Ê“œ`iÊ>Û>ˆ>LiÊ܈̅ÊViÀ>“ˆVʍ>ÜÃÊ
܅ˆV…Ê>ÀiÊÃՈÌ>LiÊvœÀʓi>ÃÕÀˆ˜}Ê>LÀ>ÈÛiÊ
and magnetic products.
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Êܜœ`i˜ÊV>Ãi°
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: .0005”/0.01mm or 0.01mm
Display:
LCD
Length standard: Electrostatic capacitance type linear
encoder
Max. response speed: unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3,000 hours in continuous use
552-314-10
552-155-10
Function
Origin-set, Zero-setting, Presetting, Offsetting, Data hold,
Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ)
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
SPECIFICATIONS
Metric
,>˜}iI
0(20)-450mm
0(20)-450mm
0(20)-450mm
0(20)-600mm
0(20)-600mm
0(20)-600mm
0(20)-1000mm
0(20)-1000mm
0(20)-1500mm
0(20)-1500mm
0(20)-2000mm
0(20)-2000mm
Order No.
552-302-10
552-150-10
552-155-10
552-303-10
552-151-10
552-156-10
552-304-10
552-152-10
552-305-10
552-153-10
552-306-10
552-154-10
Accuracy
+/-0.04mm
+/-0.06mm
+/-0.04mm
+/-0.04mm
+/-0.06mm
+/-0.04mm
+/-0.05mm
+/-0.07mm
+/-0.09mm
+/-0.11mm
+/-0.12mm
+/-0.14mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
long jaws 200mm
ceramic jaws
long jaws 200mm
ceramic jaws
long jaws 200mm
Optional Accessories
05CZA624: SPC cable with data switch (40”/ 1m)
05CZA625: SPC cable with data switch (80”/ 2m)
914055\Ê
914056\Ê
914057\Ê
914058\Ê
914053:
914054\Ê
long jaws 200mm
i˜ÌiÀˆ˜iÊ>ÌÌ>V…“i˜ÌÃÊ­““®I
i˜ÌiÀˆ˜iÊ>ÌÌ>V…“i˜ÌÃÊ­ˆ˜V…®I
*œˆ˜Ìi`Êʓi>ÃÕÀˆ˜}Ê>ÌÌ>V…“i˜ÌÃÊ­““®I
*œˆ˜Ìi`Êʓi>ÃÕÀˆ˜}Ê>ÌÌ>V…“i˜ÌÃÊ­ˆ˜V…®I
Attachment clamps (for models up to
24” / 600mm range)
ÌÌ>V…“i˜ÌÊV>“«ÃÊ­vœÀʓœ`iÃʜÛiÀÊÊ Ê
24” / 600mm range)
IÊÌÌ>V…“i˜ÌÊV>“«ÃÊ>ÀiÊÀiµÕˆÀi`Ê>˜`ʘœÌÊ>Û>ˆ>LiÊvœÀʏœ˜}ʍ>ÜÊÊ
type.
long jaws 200mm
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Inch/Metric
,>˜}iI
0(.5”)-18”
0(.5”)-18”
0(.5”)-18”
0(.5”)-24”
0(.5”)-24”
0(.5”)-24”
0(1”)-40”
0(1”)-40”
0(1”)-60”
0(1”)-60”
0(1”)-80”
0(1”)-80”
Order No.
552-312-10
552-160-10
552-165-10
552-313-10
552-161-10
552-166-10
552-314-10
552-162-10
552-315-10
552-163-10
552-316-10
552-164-10
Accuracy
+/-.002”
+/-.0025”
+/-.002”
+/-.002”
+/-.0025”
+/-.002”
+/-.002”
+/-.003”
+/-.004”
+/-.0045”
+/-.005”
+/-.0055”
Resolution
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
Remarks
long jaws 7.9”
ceramic jaws
long jaws 7.9”
ceramic jaws
Centerline Attachments
long jaws 7.9”
long jaws 7.9”
long jaws 7.9”
I­ÊÊ®\ʈ˜ˆ“Õ“Ê`ˆ“i˜Ãˆœ˜Êˆ˜Êʓi>ÃÕÀi“i˜Ì
Attachment Clamps
D-18
Pointed ID Measuring
Attachments
552-151-10
Ceramic jaws
Centerline attachments
ID point attachments
DIMENSIONS AND MASS
Unit: mm
,
D
E
C
B
A
3TANDARD¬MODELS
#ERAMIC¬JAW¬MODELS
,ONG¬JAW¬MODELS
Standard models, Ceramic, jaw models
10
Range
D
0 - 18" / 0 - 450mm
0 - 24" /0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60" / 0 - 1500mm
0 - 80" / 0 - 2000mm
95
C
Pointed
ID Measuring
Attachments
F
50
φ1
(
L
640
790
1230
1740
2250
a
100
100
150
150
150
b
18
18
24
24
24
c
41.2
41.2
62.8
62.8
62.8
): inch/mm models
f
10 (.25")
10 (.25")
10 (.5")
10 (.5")
10 (.5")
Mass (g)
715
790
1,760
2,160
2,560
Long jaw models
10
Range
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60" / 0 - 1500mm
0 - 80" / 0 - 2000mm
Centerline
Attachments
100
e
25
25
32
32
32
)NTERCHANGEABLE¬JAW¬MODELS
Unit: mm
40°
10
d
91.8
91.8
113.8
113.8
113.8
E
F
φ1
(
L
680
830
1280
1790
2300
a
200
200
200
200
200
b
24
24
24
24
24
): inch/mm models
D-19
c
89
89
110
110
110
d
91.8
91.8
113.8
113.8
113.8
e
25
25
32
32
32
f
10 (.25")
10 (.25")
10 (.5")
10 (.5")
10 (.5")
Mass (g)
1,215
1,290
2,090
2,490
2,890
ABSOLUTE Coolant Proof Carbon Fiber Caliper
SERIES 552 — with Interchangeable Jaws
FEATURES
UÊ/…iÊÀ>˜}iʜvÊ>««ˆV>̈œ˜ÃÊV>˜ÊLiÊiÝ«>˜`i`Ê
by using interchangeable jaws (optional).
UÊ+ՈVŽÊ>˜`Êi>ÃÞÊiÝV…>˜}ˆ˜}ʜvʍ>ÜÃÊ`ÕiÊ̜Ê
̅iÊ՘ˆµÕiÊV>“«ˆ˜}ʓiV…>˜ˆÃ“°Ê­Ê«>ˆÀʜvÊ
clamping wheels is a standard accessory.)
UÊ*ÀœÛˆ`i`Ê܈̅ʫÀiÃiÌÊv՘V̈œ˜ÊvœÀÊÃiÌ̈˜}Ê>Ê
desired starting point, which allows direct
readout of offset measurements.
UÊ-*
Ê`>Ì>ʜÕÌ«ÕÌ°
552-192-10 with optional interchangeable jaws
SPECIFICATIONS
Inch/Metric
Range
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60" / 0 - 1500mm
0 - 80" / 0 - 2000mm
Order No.
552-191-10
552-192-10
552-193-10
552-194-10
552-195-10
Accuracy
±.002"
±.002"
±.002"
±.004"
±.005"
Mass(g)
650
725
1480
1880
2280
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: .0005"/0.01mm
Display:
LCD
Scale type: ABSOLUTE electromagnetic linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours in continuous use
ÕÃÌÉ7>ÌiÀÊ«ÀœÌiV̈œ˜ÊiÛi\Ê*ÈÈ
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
Interchangeable Jaws (Optional)
Standard type
Inside point type
Standard Type
A
A
Order No.
07CZA058
07CZA059
B
Surface Plate Type
Scriber Type
Components
a
Right (07CAA044), 28mm
Left (07CAA045) (1.1")
b
30mm
(1.2")
Components
a
07CZA041 x 2pcs. 25mm
07CZA048 x 2pcs. 1"
b
50mm
2"
Components
a
Right (07CZA042), 8mm
Left (07CZA043)
Right (07CZA042), 031"
Left (07CZA049)
b
30mm
Scriber Type
Order No.
07CZA055
07CZA061
’A
B
Order No.
07CZA056
Inside Point Type
B
1.2"
A
B
Surface Plate Type
Centerline Type
a
3.5" / 90mm
b
1.1" / 28mm
Centerline Type
Unit: mm
Order No.
07CZA044
Order No.
07CZA057
07CZA060
’
’A
B
D-20
Components
a
07CZA039 x 2pcs. 30mm
07CZA047 x 2pcs. 1.2"
b
30mm
1.2"
Functions
Origin-set, Zero-setting, Presetting, Offsetting, Data hold,
Õ̜“>̈VÊ«œÜiÀʜ˜Éœvv]Ê>Ì>ʜÕÌ«ÕÌ]ʈ˜V…É““ÊVœ˜ÛiÀȜ˜Ê
(inch/mm models)
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
02AZD790A\Ê-*
ÊV>LiÊvœÀÊ1‡76ÊÜÉÊ`>Ì>ÊÃ܈ÌV…Ê­£È䓓®
ABSOLUTE Back-Jaw Centerline Caliper
SERIES 573 — Center-to-Center & Edge-to-Center Types
FEATURES
UÊ-«iVˆ>ÞÊ`iÈ}˜i`Ê̜ʓi>ÃÕÀiÊ̅iÊ`ˆÃÌ>˜ViÊ
between two centers or the distance from
an edge to center.
UÊ*ÀœÛˆ`i`Ê܈̅ʍ>ÜÃʜ˜Ê̅iÊL>VŽÊœvÊ̅iÊ
slider, measurements can be read easily by
looking down.
UʈÀiVÌÊÀi>`ˆ˜}ʜvÊ«ˆÌV…Ê“i>ÃÕÀi“i˜ÌÃʈÃÊ
>Û>ˆ>LiÊ`ÕiÊ̜Ê̅iʜvvÃiÌÊÛ>ÕiÊÃiÌ̈˜}Ê
function.
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°
UÊ-Õ««ˆi`ÊwÌÌi`ʈ˜Êܜœ`i˜ÊV>Ãi°
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: 0.01mm
Display:
LCD
i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
573-117-10
(Center-to-center type)
Function
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
573-119-10
(Edge-to-center type)
Optional Accessories
Data hold unit
SPC cable with data switch (1m)
SPC cable with data switch (2m)
SPECIFICATIONS
Metric
Range
10 - 200mm
10 - 300mm
Center-to-center distance type
Order No.
573-116-10
573-117-10
Metric
Range
10 - 200mm
10 - 300mm
Accuracy
±0.10mm
±0.15mm
Resolution Mass (g)
0.01mm
482
0.01mm
578
Edge-to-center distance type
Order No.
Accuracy
Resolution Mass (g)
573-118-10 ±0.10mm 0.01mm
485
573-119-10 ±0.15mm 0.01mm
581
DIMENSIONS
Unit: mm
ø5
ø1
ø20
30
30
30
64
64
ø5
30
959143:
959149:
959150:
ø1
ø1
ø10
ø20
573-116-10 / 573-117-10
573-118-10 / 573-119-10
D-21
ø1
ø10
Offset Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
UÊ>ˆ˜ÊÃV>iʍ>ÜÊV>˜Êψ`iÊÕ«Ê>˜`Ê`œÜ˜Ê̜Ê
facilitate measurement of stepped sections.
(Hard-to-get-at dimensions such as A, B, C
can be accurately measured.)
UÊ7ˆÌ…Ê`i«Ì…ÊL>À°
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
536-101
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
,i܏Ṏœ˜I\Ê°äääx¸Éä°ä£““ÊœÀÊä°ä£““
À>`Õ>̈œ˜II\Êä°äx““
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
573-701
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ)
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
SPECIFICATIONS
Optional Accessories for Digital Model
Metric
Digital model
Range
0 - 150mm
0 - 200mm
0 - 300mm
Order No.
573-601
573-602
573-604
Accuracy
±0.02mm
±0.02mm
±0.03mm
Resolution
0.01mm
0.01mm
0.01mm
Mass (g)
168
198
350
Order No.
536-101
536-102
536-103
Accuracy
±0.05mm
±0.05mm
±0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
150
200
400
Resolution
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
Mass (g)
168
198
350
05CZA624: SPC cable with data switch (40” / 1m )
05CZA625: SPC cable with data switch (80” / 2m)
Connecting cable for U-Wave-T
02AZD790A: SPC cable for U-Wave (160mm)
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
Inch/Metric
Range
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 12" / 0 - 300mm
Digital model
Order No.
573-701
573-702
573-704
Accuracy
±.001"
±.001"
±.0015"
DIMENSIONS
Unit: mm
`
`
V
V
>
>
6iÀ˜ˆiÀʓœ`i
ˆ}ˆÌ>Ê“œ`i
L
L
Range
0 - 6” / 0 - 150mm
0 - 8” / 0 - 200mm
0 - 12” / 0 - 300mm
a
95
95
135
( ) Digital Model
D-22
b
10
10
15
c
40
50
64
d
30.4 (30)
40.4 (38.5)
51
Offset Centerline Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
UʜiÊ`ˆ>“iÌiÀÊŜՏ`ÊLiʈ˜Ê̅iÊÀ>˜}iʜvÊ
1.5mm - 10mm (.06" - .4").
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊ-«iVˆ>ÞÊ`iÈ}˜i`ÊvœÀÊVi˜ÌiÀÊ̜ÊVi˜ÌiÀÊ
distance measurements on the same and
offset planes.
UÊ
>˜Ê>ÃœÊ“i>ÃÕÀiÊvÀœ“Êi`}iÊ̜ÊVi˜ÌiÀ°
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
,i܏Ṏœ˜I\Ê °äääx»Éä°ä£““ÊœÀÊä°ä£““
À>`Õ>̈œ˜II\Êä°äx““
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
573-605
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
SPECIFICATIONS
Metric
Digital model
Order No.
573-605
573-606
573-608
Range
10 - 150mm
10 - 200mm
10 - 300mm
Inch/Metric
Accuracy
±0.03mm
±0.03mm
±0.04mm
Resolution
0.01mm
0.01mm
0.01mm
Mass (g)
157
177
320
Digital model
Order No.
573-705
573-706
573-708
Range
.4 - 6" / 10 - 150mm
.4 - 8" / 10 - 200mm
.4 - 12" / 10 - 300mm
Accuracy
±.0015"
±.0015"
±.0015"
Resolution
.0005” / 0.01mm
.0005” / 0.01mm
.0005” / 0.01mm
Mass (g)
157
177
320
Metric
Order No.
536-105
536-106
536-107
Range
10 - 150mm
10 - 200mm
10 - 300mm
Accuracy
±0.05mm
±0.05mm
±0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
140
160
320
DIMENSIONS
Unit: mm
Îä
>
Îä
£ä
£ä
6iÀ˜ˆiÀʓœ`i
£ä
©£
Ì
©£
©£
Ì
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
Connecting cable for U-Wave-T
02AZD790A: SPC cable for U-Wave (160mm)
>
Optional Accessories for Digital Model
536-105
£ä
Range
0 - 6” / 0 - 150mm
0 - 8” / 0 - 200mm
0 - 12” / 0 - 300mm
a
75
75
100
D-23
t
3
3
3.8
ˆ}ˆÌ>Ê“œ`i
Point Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
UÊ7ˆÌ…Ê`i«Ì…ÊL>À°
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊ >ÀÀœÜÊ̈«Ê>ÜÃÊwÌʈ˜ÌœÊÛiÀÞÊÓ>Ê}ÀœœÛiÃÊ
>˜`ÊÌÀ>VŽÃ]ʓ>Žˆ˜}ʓ>˜ÞÊ«ÀiۈœÕÏÞÊ
`ˆvwVՏÌʜÕÌÈ`iʓi>ÃÕÀi“i˜ÌÃÊv>ÀÊi>ÈiÀÊ
to obtain.
573-721
Technical Data
536-121
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
,i܏Ṏœ˜I\Ê °äääx»Éä°ä£““ÊœÀÊä°ä£““
À>`Õ>̈œ˜II\Êä°äx““
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
SPECIFICATIONS
Metric
Digital model
Order No. Accuracy Resolution
573-621
±0.02mm 0.01mm
573-625
±0.02mm 0.01mm
Range
0 - 150mm
0 - 150mm
Mass (g)
163
163
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Inch/Metric
Digital model
Range
Order No. Accuracy
0 - 6" / 0 - 150mm 573-721
±.001"
0 - 6" / 0 - 150mm 573-725
±.001"
Resolution
Mass (g)
.0005” / 0.01mm 163
.0005” / 0.01mm 163
Optional Accessories for Digital Model
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
Metric
Order No.
536-121
Range
0 - 150mm
Accuracy Graduation
±0.05mm 0.05mm
Mass (g)
150
DIMENSIONS
Unit: mm
10
40
30
25°
2
2
2
0.3
0.3
536-121
D-24
40
30
10
30
40
21
10
°
573-625, 573-725
0.3
0.3
573-621, 573-721
Blade Type Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
Technical Data
UÊ7ˆÌ…Ê`i«Ì…ÊL>À°
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊ/…iÊ̅ˆ˜ÊL>`iÊÌÞ«iʍ>ÜÃÊwÌʈ˜ÌœÊÛiÀÞÊÓ>Ê
}ÀœœÛiÃÊ>˜`ʓ>Žˆ˜}Ê«ÀiۈœÕÏÞÊ`ˆvwVՏÌÊ
outside measurements far easier to obtain.
UÊ/…iÊ"ʓi>ÃÕÀˆ˜}Êv>ViÃÊ>ÀiÊV>ÀLˆ`i‡
tipped.
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
,i܏Ṏœ˜I\Ê °äääx»Éä°ä£““ÊœÀÊä°ä£““
À>`Õ>̈œ˜II\Êä°äx““
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
573-734
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories for Digital Model
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
536-134
SPECIFICATIONS
Metric
Digital model
Order No.
573-634
Range
0 - 150mm
Accuracy Resolution
±0.02mm 0.01mm
Mass (g)
168
Inch/Metric
Digital model
Range
Order No.
Accuracy Resolution
Mass (g)
0 - 6" / 0 - 150mm 573-734
±.001" .0005” / 0.01mm 168
Metric
Order No.
536-134
536-135
536-136
Range
0 - 150mm
0 - 200mm
0 - 300mm
Accuracy
±0.05mm
±0.05mm
±0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
130
160
340
DIMENSIONS
Unit: mm
3.5
b
20
a
40
t
0.75
c
Vernier model
Digital model
D-25
Range
0 - 6” / 0 - 150mm
0 - 200mm
0 - 300mm
a
40
50
64
b
20
25
30
c
0.75
0.75
1
t
3
3
3.8
Neck Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊ*œˆ˜Ìʍ>ÜÊÌÞ«iÊV>˜Ê“i>ÃÕÀiÊÜ>Ê̅ˆVŽ˜iÃÃÊ
inside bores and recesses.
Uʏ>Ìʍ>ÜÊÌÞ«iÊV>˜Ê“i>ÃÕÀiÊ}ÀœœÛiÃÊ>˜`Ê
recesses.
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
,i܏Ṏœ˜I\Ê ä°ä£““ÊœÀÊ°äääx¸Éä°ä£““
À>`Õ>̈œ˜II\Êä°äx““
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
573-752
Point jaw type
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
536-151
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
536-152
Optional Accessories for Digital Model
05CZA624: SPC cable with data switch (1m / 40”)
05CZA625: SPC cable with data switch (2m / 80”)
SPECIFICATIONS
Metric
Digital model
Order No.
573-651
573-652*
Range
0 - 150mm
0 - 150mm
Accuracy
±0.03mm
±0.03mm
Resolution
0.01mm
0.01mm
Mass (g)
157
157
I*œˆ˜Ìʍ>ÜÊÌÞ«i
Inch/Metric
Digital model
Range
Order No.
Accuracy
0 - 6" / 0 - 150mm 573-751
±.0015"
0 - 6" / 0 - 150mm 573-752*
±.0015"
Resolution
Mass (g)
.0005” / 0.01mm 157
.0005” / 0.01mm 157
I*œˆ˜Ìʍ>ÜÊÌÞ«i
Metric
Order No.
536-151
536-152*
Range
0 - 150mm
0 - 150mm
Accuracy
±0.05mm
±0.05mm
Graduation
0.05mm
0.05mm
Mass (g)
140
140
I*œˆ˜Ìʍ>ÜÊÌÞ«i
DIMENSIONS
40
33.5
35
Unit: mm
5
536-151
573-651, 573-751
5
2
38
38
（
5
5
Point jaw type
536-152
5
D-26
Point jaw type
573-652, 573-752
）
°
60
φ0.5
φ2.4
5
5
Tube Thickness Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊ/…iʓ>ˆ˜ÊÃV>iʍ>ÜʈÃÊ>ÊÀœÕ˜`ÊL>ÀÊ̅>ÌÊ
facilitates measurements of tube wall
thickness.
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
ˆÃ«>ÞI\Ê Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
573-761
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®)
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories for Digital Model
536-161
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
SPECIFICATIONS
Metric
Range
0 - 150mm
Digital model
Order No.
573-661
Accuracy
±0.05mm
Resolution
0.01mm
Mass(g)
167
Inch/Metric
Digital model
Range
Order No.
Accuracy
0 - 6" / 0 - 150mm 573-761
±.002"
Resolution
Mass(g)
.0005" / 0.01mm 167
Metric
Range
0 - 150mm
Order No.
536-161
Accuracy
±0.05mm
Graduation
0.05mm
Mass(g)
150
DIMENSIONS AND MASS
Unit: mm
16
229
(32)
40
œÀiÊ̅>˜Ê©Î
Mass: 150g
Vernier model
ø3
(32)
40
16
231
Mass: 167g
ø3
D-27
Digital model
ABSOLUTE Low Force Caliper
SERIES 573
FEATURES
Technical Data
rubber parts that standard calipers cannot
measure.
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊÕiÊ̜Ê̅iʏœÜʓi>ÃÕÀˆ˜}ÊvœÀViÊ̅iÃiÊ
calipers are ideal for elastic or resilient
workpieces such as plastic parts and
573-191-20
SPECIFICATIONS
Function
Metric
Order No.
573-191-20
Range
0 - 180mm
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: .0005”/0.01mm or 0.01mm
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Measuring force: 0.49N to 0.98N (50gf to 100gf)
Jaw retraction: 0.3mm
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Accuracy
±0.05mm
Resolution
0.01mm
Mass (g)
253
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
Inch/Metric
Range
Order No. Accuracy Resolution
Mass (g)
0 - 7" / 0 - 180mm 573-291-20 ±.002"
.0005” / 0.01mm 253
959143:
959149:
959150:
Data hold unit
SPC cable with data switch (40” / 1m)
SPC cable with data switch (80” / 2m)
DIMENSIONS AND MASS
Σ{
{ä
£È
Unit: mm
Mass: 253g
Measurement procedures
ABSOLUTE Snap Caliper
To measure resilient
workpieces take the
measurement when the
pointer is between the
two index lines.
SERIES 573
FEATURES
UÊ/…iÊ-"1/ʈ}ˆ“>̈VÊØ>«ÊV>ˆ«iÀÊ
features a spring-loaded mechanism to
>œÜʵՈVŽÊ>˜`ÊivwVˆi˜ÌÊ"É "‡"Ê
573-281-20
inspection for mass production parts.
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
Technical Data
SPECIFICATIONS
Metric
Range
0 - 100mm
0 - 150mm
Order No.
573-181-20
573-182-20
Accuracy
±0.02mm
±0.02mm
Resolution
0.01mm
0.01mm
Mass (g)
213
233
Inch/Metric
DIMENSIONS AND MASS
Range
Order No.
0 - 4” / 0 - 100mm 573-281-20
0 - 6" / 0 - 150mm 573-282-20
Accuracy Resolution
Mass (g)
±.001"
.0005” / 0.01mm 213
±.001"
.0005” / 0.01mm 233
Unit: mm
>
`
VÊ
L
ÓÇ°x
D-28
Range
0 - 100mm
0 - 150mm
L
233
290
a
40
50
b
c
d
21
16.5 16
24.5 20
16
Mass (g)
213
233
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: .0005”/0.01mm or 0.01mm
Repeatability: .0005” / 0.01mm
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Measuring force: 7N to 14N (700gf to 1400gf)
Jaw retraction: 2mm
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Function
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ)
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories
959143:
959149:
959150:
Data hold unit
SPC cable with data switch (40” / 1m)
SPC cable with data switch (80” / 2m)
Scribing Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and Vernier Type
FEATURES
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°
UÊ/…iÊV>ÀLˆ`i‡Ìˆ««i`ʍ>ÜÃÊv>VˆˆÌ>ÌiÊw˜iÊ
scribing on workpiece.
UÊ7ˆÌ…Ê`i«Ì…ÊL>À°
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
573-676
Function
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
Digital model
Order No.
573-676
573-677
573-679
Metric
Vernier type
Range
0 - 150mm
0 - 200mm
0 - 300mm
Order No.
536-221
536-222
536-223
Accuracy
±0.02mm
±0.02mm
±0.03mm
Resolution
0.01mm
0.01mm
0.01mm
Mass (g)
166
196
345
Accuracy
±0.05mm
±0.05mm
±0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
150
180
355
DIMENSIONS
Unit: mm
`
V
L
>
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
i
Optional Accessories
Range
0 - 150mm
0 - 200mm
0 - 300mm
L
229
288
403
D-29
a
46
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
e
33
43
54
ABSOLUTE Inside Caliper
SERIES 573, 536 — Knife-edge/Inside Groove/Point Jaw Type
FEATURES
UÊ-«iVˆ>ÞÊ`iÈ}˜i`ÊvœÀʈ˜Ãˆ`iʓi>ÃÕÀi“i˜ÌÃÊ
in hard-to-reach places.
Knife-edge type
UÊ7ˆÌ…Ê-*
Ê`>Ì>ʜÕÌ«ÕÌ°Ê­-iÀˆiÃÊxÇή
UÊ-Õ««ˆi`ʈ˜ÊwÌÌi`Ê«>Ã̈VÊV>Ãi°Ê
18” / 450mm and 24”/ 600mm supplied in
wooden case.
573-742
Technical Data
536-142
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
,i܏Ṏœ˜I\Ê °äääx»Éä°ä£““ÊÉÊä°ä£““
À>`Õ>̈œ˜II\Êä°äx““
ˆÃ«>ÞI\Ê i˜}̅ÊÃÌ>˜`>À`I\Ê-"1/ÊiiVÌÀœÃÌ>̈VÊV>«>VˆÌ>˜ViÊÌÞ«iÊ
linear encoder
>Ý°ÊÀi뜘ÃiÊëii`I\Ê1˜ˆ“ˆÌi`
>ÌÌiÀÞI\Ê -,{{Ê­£Ê«V°®]Ê938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊΰxÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
Inside groove type
Iˆ}ˆÌ>Ê“œ`iÃÊÊÊII˜>œ}ʓœ`iÃ
Function of Digital Model
573-745
Origin-set, Zero-setting, Power On/Off, Data output,
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê­œ˜Êˆ˜V…É“iÌÀˆVʓœ`iÃʜ˜Þ®
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
Optional Accessories for Digital Model
536-145
05CZA624: SPC cable with data switch (40” / 1m)
05CZA625: SPC cable with data switch (80” / 2m)
Point jaw type
573-746
˜ˆvi‡i`}iÊÌÞ«i
536-146
SPECIFICATIONS
Metric
Digital model
Range
10 - 200mm
10 - 160mm
20 - 170mm
Inch/Metric
Range
.4" - 8" / 10-200mm
.4" - 6" / 10-150mm
.8" - 6" / 20-150mm
Order No.
573-642
573-645
573-646
Accuracy
±0.05mm
±0.05mm
±0.03mm
Digital model
Order No.
573-742
573-745
573-746
Remarks
Knife-edge type, Measurable min. hole diameter: ø10mm
˜Ãˆ`iÊ}ÀœœÛiÊÌÞ«i]Êi>ÃÕÀ>Liʓˆ˜°Ê…œiÊ`ˆ>“iÌiÀ\Ê©£ä““
Point jaw type, Measurable min. hole diameter: ø20mm
Accuracy
±.002"
±.002"
±.0015"
Remarks
Knife-edge type, Measurable min. hole diameter: ø.4"
˜Ãˆ`iÊ}ÀœœÛiÊÌÞ«i]Êi>ÃÕÀ>Liʓˆ˜°Ê…œiÊ`ˆ>“iÌiÀ\Ê©°{¸
Point jaw type, Measurable min. hole diameter: ø.8"
Mass (g)
227
147
157
Mass (g)
227
147
157
Metric
Range
10 - 200mm
10 - 150mm
20 - 150mm
30 - 300mm
70 - 450mm
70 - 600mm
˜Ãˆ`iÊ}ÀœœÛiÊÌÞ«i
*œˆ˜Ìʍ>ÜÊÌÞ«i
Order No.
536-142
536-145
536-146
536-147
536-148
536-149
Accuracy
±0.12mm
±0.05mm
±0.05mm
±0.08mm
±0.10mm
±0.12mm
Remarks
Knife-edge type, Measurable min. hole diameter: ø10mm
˜Ãˆ`iÊ}ÀœœÛiÊÌÞ«i]Êi>ÃÕÀ>Liʓˆ˜°Ê…œiÊ`ˆ>“iÌiÀ\Ê©£ä““
Point jaw type, Measurable min. hole diameter: ø20mm
Point jaw type, Measurable min. hole diameter: ø30mm
Point jaw type, Measurable min. hole diameter: ø70mm
Point jaw type, Measurable min. hole diameter: ø70mm
D-30
Mass (g)
210
130
140
370
1,250
1,430
œÀiÊ̅>˜Ê©Óä
DIMENSIONS AND MASS
Unit: mm
Knife-edge type
290
58
X
X‘
65
70
70
(D)
0.3
3
3
X
X‘
8
8
(H)
0.3
74.5
Mass: 223g
573-642 / 573-742
90.5
Mass: 210g
536-142
16
16
288
Section X−X’
Section X−X’
Inside groove type
5
(H)
25
35
3
5
R5
R5
Mass: 143g
573-645 / 573-745
R5
3
3.5
20
3
(I)
Point jaw type
233
e
Mass: 153g
573-646 / 573-746
Order No.
536-146
536-147
536-148
536-149
Range
150mm
300mm
450mm
600mm
a
229
403
610
750
b
16
20
25
25
c
38
98
145
145
d
31
89
136
136
e
5
5
10
10
f
5
10
25
25
g
2
2
5
5
ø0.5
60°
5
Mass (g)
140
370
1,250
1,430
D-31
ø2.4
38
5
40
33.5
(ø1)
ø0.5
60°
g
f
ø2.4(ø5)
(d)
c
b
16
a
28.5
R5
3
20
35
Mass: 130g
536-145
3
16
233
16
229
MyCAL-Lite
SERIES 700 — Digital Caliper for DIY
FEATURES
UÊ/…iÊ»Þ
‡ˆÌi»ÊˆÃÊ>˜Êˆ`i>Ê“i>ÃÕÀˆ˜}Ê
tool for DIY.
UÊ/…iÊ
ÊÃVÀii˜Ê>œÜÃÊiÀÀœÀ‡vÀiiÊ
readout of measurements.
UÊ7ˆÌ…Ê`i«Ì…Ê“i>ÃÕÀˆ˜}ÊL>À°
Technical Data
VVÕÀ>VÞ\Ê ,iviÀÊ̜Ê̅iʏˆÃÌʜvÊëiVˆwV>̈œ˜Ã°
Resolution: .001” / 0.1mm
Display:
LCD
Length standard: Electrostatic capacitance type linear
encoder
Max. response speed: 1800mm/s
Battery:
SR44 (1 pc.), 938882
>ÌÌiÀÞʏˆviI\Ê««ÀœÝ°ÊÓÊÞi>ÀÃÊ՘`iÀʘœÀ“>ÊÕÃi
700-113-10
Function
Zero-setting, Power on/off
ˆ˜V…É““ÊVœ˜ÛiÀȜ˜Ê
>À“\Ê
œÜÊۜÌ>}i]Ê
œÕ˜Ìˆ˜}ÊÛ>ÕiÊVœ“«œÃˆÌˆœ˜ÊiÀÀœÀ
700-123-10
SPECIFICATIONS
Inch/Metric
Order No.
700-113-10
700-123-10
Range
0 - 6” / 0 - 150mm
0 - 8” / 0 - 200mm
Accuracy
±.005” / ±0.2mm
±.005” / ±0.2mm
Mass (g)
150
170
DIMENSIONS
Unit: mm
40
16
16.5
21
231 (287)
( ): 8" Model
D-32
Center Line Gage
Optional Accessories for Caliper
FEATURES
Pairs of conical probes are specially designed for
ˆ}ˆ“>̈V]ʈ>Ê>˜`Ê6iÀ˜ˆiÀÊV>ˆ«iÀÃÊ̜ʵՈVŽÞÊ
measure centerline distances.
050001
Application for 4”, 6” and 8” Vernier,
ˆ>Ê>˜`ʈ}ˆ“>̈VÊ
>ˆ«iÀÃ]ÊÀiµÕˆÀˆ˜}Ê
`ˆ“i˜Ãˆœ˜ÃʜÛiÀÊ°ÎÇx»°
050018
Application for 12” Vernier, Dial and Digimatic
>ˆ«iÀÃÊÀiµÕˆÀˆ˜}Ê`ˆ“i˜Ãˆœ˜ÃʜÛiÀÊ°x»°
SPECIFICATIONS
L
Center Line Gage
Order No.
050001
050018
DIMENSIONS
C
A
050001
050018
B
Description
For 4, 6 and 8” Calipers
For 12” Calipers
A
.375”
.500”
B
2.187”
2.75”
C
.141”
.154”
Depth Base Attachment
Optional Accessories for Caliper
FEATURES
UʜÀÊ{»]ÊÈ»]Ên»]Ê£Ó»ÊÉÊ£ä䓓]Ê£x䓓]Ê
Óä䓓]ÊÎä䓓]ÊÛiÀ˜ˆiÀ]Ê`ˆ>Ê>˜`Ê
`ˆ}ˆÌ>ÊV>ˆ«iÀÃÊ܅ˆV…Ê…>ÛiÊ>Ê`i«Ì…Ê
measuring bar.
Uʈ˜iÞÊ}ÀœÕ˜`i`ÊL>ÃiÊÃÕÀv>ViÊ>˜`ÊÃiVÕÀiÊ
locking clamp.
050084-10
SPECIFICATIONS
Inch/Metric
Size
3” / 75mm
4” / 100mm
5” / 125mm
Order No.
050083-10
050084-10
050085-10
Remarks (applicable measuring range of caliper)
4”, 6”, 8” / 100mm, 150mm, 200mm
4”, 6”, 8” / 100mm, 150mm, 200mm
12” / 300mm
DIMENSIONS
i
Size
3” / 75mm
4” / 100mm
5” / 125mm
`
Depth base
attachment
V
Unit: mm
>
L
a
25
25
30
t: Base thickness
D-33
b
75
100
125
c
26.5
26.5
28.5
d
13
13
13
e
18.5
18.5
20
t
12
12
14
Quick Guide to Precision
Measuring Instruments
Calipers
■ Nomenclature
Vernier Caliper
Screw, gib setting
Gib, slider
Locking screw
Screw, gib pressing
Inside measuring faces
Step measuring faces
Depth bar
Stopper, slider
Beam
Inside jaws
Outside jaws
N How to Read the Scale
LDial Calipers
Main scale
Absolute
Digimatic
Caliper
①
0
1
2
3
(1)
40
6
7
8
90
9
60
70
50
70
30
505-666
60
30
(2)
(2)
0.01mm
80
70
MADE IN JAPAN
40
50
40
Main scale
10
Output connector
②
Vernier scale
0.01mm
505-666
10
20
10
20
70
Locking screw
0
10
80
0
80
Slider
5
0
90
30
4
Reference surface
Vernier scale
Slider
LVernier
Calipers
Outside
measuring
faces
0
10
Inside
measuring
faces 20
Step measuring faces
Depth measuring faces
Main scale
Thumbwheel
Inside jaws
Graduation
0.05mm
Graduation
(1) Main scale reading
Outside
jaws
(2) Vernier scale
reading
Caliper reading
(1) Main scale reading
16
mm
Main
(2) Dial face reading
0.13 scale
mm
Dial Caliper reading
16.13 mm
Thumb-roller
4.00 mm
0.75 mm
4.75 mm
Depth bar
Beam
Dial face
0.01mm
Reference surface
Depth measuring faces
ZERO Set/ABSOLUTE button
Outside measuring faces
N How to Read the Scale
LVernier Calipers
■ Measurement examples
LDial Calipers
(1)
0
(1)
10
0
0
10
20
0
1
30
2
3
4
40
5
6
50
7
8
9
60
1
30
2
3
4
40
5
6
50
7
8
9
60
70
(1)
90
(2)
0
0.01mm
505-666
10
60
50
80
Main scale
50
70
40
Dial face
0.05mm
(1) Main scale
(2) Vernier
Reading
MADE IN JAPAN
Main scale
Vernier scale
Graduation
4. Depth measurement
30
505-666
60
70
(2)
0.01mm
70
30
3. Step measurement
20
10
(2)
40
2. Inside measurement
10
80
20
70
(2)
0
80
10
70
10
0
90
20
1. Outside measurement
Graduation
0.01mm
(1) Main scale
(2) Dial face
Reading
16
mm
0.15 mm
16.15 mm
16
mm
0.13 mm
16.13 mm
Note) Above left, 0.15 mm (2) is read at the position where a main scale graduation line corresponds with a vernier
graduation line.
N Special Purpose Caliper Applications
Point jaw type
Offset jaw type
Depth type
90
0
10
20
30
40
50
60
70
0
1
2
3
4
5
6
For uneven surface measurement
7
8
9
For stepped feature measurement
本尺目盛
バーニヤ目盛
D-34
Standard
Inside me
Measurem
30
505-666
10
60
10
For diameter of narrow groove
measurement
20
0.01mm
70
0
C-type
10
80
0
Blade jaw type
MADE IN JAPAN
50
70
80
40
For depth measurement
本尺目盛
目盛板
ve
■ Vernier scale
■ About Long Calipers
This is a short auxiliary scale that enables accurate interpolation between
the divisions of a longer scale without using mechanical magnification. The
principle of operation is that each vernier scale division is slightly smaller
than a main scale division, so that successive vernier graduations successively
coincide with main scale graduations as one is moved relative to the other.
Specifically, n divisions on a vernier scale are the same length as n-1 divisions
on the main scale it works with, and n defines the division (or interpolation)
ratio. Although n may be any number, in practice it is typically 10, 20, 25, etc.,
so that the division is a useful decimal fraction. The example below is for n =
10. The main scale is graduated in mm, and so the vernier scale is 9mm (10
divisions) long, the same as 9mm (9 divisions) on the main scale. This produces
a difference in length of 0.1mm (1) as shown in figure A (the 1st vernier
graduation is aligned with the first main scale graduation). If the vernier scale
is slid 0.1mm to the right as shown in figure B, the 2nd graduation line on the
vernier scale moves into alignment with the 2nd line on the main scale (2),
and so enables easy reading of the 0.1mm displacement.
Steel rules are commonly used to roughly measure large workpieces but if a
little more accuracy is needed then a long caliper is suitable for the job. A long
caliper is very convenient for its user friendliness but does require some care in
use. In the first place it is important to realize there is no relationship between
resolution and accuracy. For details, refer to the values in our catalog.
Resolution is constant whereas the accuracy obtainable varies dramatically
according to how the caliper is used.
The measuring method with this instrument is a concern since distortion of
the main beam causes a large amount of the measurement error, so accuracy
will vary greatly depending on the method used for supporting the caliper at
the time. Also, be careful not to use too much measuring force when using
the outside measuring faces as they are furthest away from the main beam so
errors will be at a maximum here. This precaution is also necessary when using
the tips of the outside measuring faces of a long-jaw caliper.
9mm (9 graduation lines)
A
(1) 0.1mm
■ Small hole measurement with an M-type caliper
Divided into10 equal divisions
A structural error d occurs when you measure the internal diameter of a small hole.
B
0.1mm
Some early calipers divided 19 divisions on the main scale by 20 vernier divisions
to provide 0.05mm resolution. However, the closely spaced lines proved difficult
to read and so, since the 1970s, a long vernier scale that uses 39 main scale
divisions to spread the lines is generally used instead, as shown below.
● 19mm Vernier scale
0
10
20
● 39mm vernier scale
(long vernier scale)
30
40
30
40
50
60
2
4
6
8 10
0
1
19mm
Scale reading 1.45mm
2
3
4
5
6
7
8
9 10
39mm
Scale reading 30.35mm
Calipers were made that gave an even finer resolution of 0.02mm. These
required a 49-division vernier scale dividing 50 main scale divisions. However,
they were difficult to read and are now hard to find since Digital calipers with
an easily read display and resolution of 0.01mm appeared.
C-type
CN-type
ød
øD
70
0.05mm
0
True internal diameter (øD: 5mm)
Unit: mm
t1+t2+C
0.3
0.5
0.7
d
0.009
0.026
0.047
t1
øD: True internal diameter
ød : Measured diameter
t1, t2: Thickness of the inside jaw
C: Distance between the inside jaws
d: Measurement error (øD – ød)
C t2
(2) Aligned
■ Inside Measurement with a CM-type Caliper
Because the inside measuring faces of a CM-type caliper are at the tips of the
jaws the measuring face parallelism is heavily affected by measuring force,
and this becomes a large factor in the measurement accuracy attainable.
In contrast to an M-type caliper, a CM-type caliper cannot measure a very
small hole diameter because it is limited to the size of the stepped jaws,
although normally this is no inconvenience as it would be unusual to have to
measure a very small hole with this type of caliper. Of course, the radius of
curvature on the inside measuring faces is always small enough to allow correct
hole diameter measurements right down to the lowest limit (jaw closure).
Mitutoyo CM-type calipers are provided with an extra scale on the slider
for inside measurements so they can be read directly without the need for
calculation, just as for an outside measurement. This useful feature eliminates
the possibility of error that occurs when having to add the inside-jawthickness correction on a single-scale caliper.
For inside only
Standard outside measurement
Inside measurement of a stepped hole
Measurement of a stepped part
Standard outside measurement
Measurement of a stepped hole
Measurement of a stepped part
For outside only
ød
øD
D-35
■ General notes on use of caliper
L
5. Moving Jaw Tilt Error
If the moving jaw becomes tilted out of parallel with the fixed jaw, either
through excessive force being used on the slider or lack of straightness in the
reference edge of the beam, a measurement error will occur as shown in the
figure. This error may be substantial due to the fact that a caliper does not
conform to Abbe’s Principle.
h
a
f=h =h·a/ℓ
h
1. Potential causes of error
ÊÛ>ÀˆiÌÞʜvÊv>V̜ÀÃÊV>˜ÊV>ÕÃiÊiÀÀœÀÃÊ܅i˜Ê“i>ÃÕÀˆ˜}Ê܈̅Ê>ÊV>ˆ«iÀ°Ê>œÀÊ
v>V̜ÀÃʈ˜VÕ`iÊ«>À>>ÝÊivviVÌÃ]ÊiÝViÃÈÛiʓi>ÃÕÀˆ˜}ÊvœÀViÊ`ÕiÊ̜Ê̅iÊv>VÌÊ̅>ÌÊ
a caliper does not conform to Abbe's Principle, differential thermal expansion
due to a temperature difference between the caliper and workpiece, and
the effect of the thickness of the knife-edge jaws and the clearance between
these jaws during measurement of the diameter of a small hole. Although
there are also other error factors such as graduation accuracy, reference
i`}iÊÃÌÀ>ˆ}…̘iÃÃ]ʓ>ˆ˜ÊÃV>iÊy>̘iÃÃʜ˜Ê̅iʓ>ˆ˜ÊL>`i]Ê>˜`ÊõÕ>Ài˜iÃÃʜvÊ
the jaws, these factors are included within the instrumental error tolerances.
/…iÀivœÀi]Ê̅iÃiÊv>V̜ÀÃÊ`œÊ˜œÌÊV>ÕÃiÊ«ÀœLi“ÃÊ>Ãʏœ˜}Ê>ÃÊ̅iÊV>ˆ«iÀÊÃ>̈ÃwiÃÊ
̅iʈ˜ÃÌÀՓi˜Ì>ÊiÀÀœÀÊ̜iÀ>˜ViðÊ>˜`ˆ˜}ʘœÌiÃʅ>ÛiÊLii˜Ê>``i`Ê̜Ê̅iÊ-Ê
so that consumers can appreciate the error factors caused by the structure of
the caliper before use. These notes relate to the measuring force and stipulate
̅>Ìʺ>ÃÊ̅iÊV>ˆ«iÀÊ`œiÃʘœÌʅ>ÛiÊ>ÊVœ˜ÃÌ>˜Ì‡vœÀViÊ`iۈVi]ÊޜÕʓÕÃÌʓi>ÃÕÀiÊ
>ÊܜÀŽ«ˆiViÊ܈̅Ê>˜Ê>««Àœ«Àˆ>ÌiÊiÛi˜Ê“i>ÃÕÀˆ˜}ÊvœÀVi°Ê/>ŽiÊiÝÌÀ>ÊV>ÀiÊ܅i˜Ê
you measure it with the root or tip of the jaw because a large error could occur
in such cases.”
f
Example: Assume that the error slope of the jaws due to tilt of the slider is 0.01mm in 50mm and
the outside measuring jaws are 40mm deep, then the error (at the jaw tip) is calculated as
(40/50)x0.01mm = 0.008mm.
If the guide face is worn then an error may be present even using the correct measuring force.
6. Relationship between measurement and temperature
øD
L < øD
2. Inside measurement
Insert the inside jaw as deeply as possible before measurement.
,i>`Ê̅iʓ>݈“Փʈ˜`ˆV>Ìi`ÊÛ>ÕiÊ`ÕÀˆ˜}ʈ˜Ãˆ`iʓi>ÃÕÀi“i˜Ì°
,i>`Ê̅iʓˆ˜ˆ“Փʈ˜`ˆV>Ìi`ÊÛ>ÕiÊ`ÕÀˆ˜}Ê}ÀœœÛiÊ܈`̅ʓi>ÃÕÀi“i˜Ì°
3. Depth measurement
,i>`Ê̅iʓˆ˜ˆ“Փʈ˜`ˆV>Ìi`ÊÛ>ÕiÊ`ÕÀˆ˜}Ê`i«Ì…Ê“i>ÃÕÀi“i˜Ì°
7. Handling
Caliper jaws are sharp, and therefore the instrument must be handled with
care to avoid personal injury.
Avoid damaging the scale of a digital caliper and do not engrave an
identification number or other information on it with an electric marker pen.
Avoid damaging a caliper by subjecting it to impact with hard objects or by
dropping it on a bench or the floor.
8. Maintenance of beam sliding surfaces and measuring faces
Wipe away dust and dirt from the sliding surfaces and measuring faces with a
dry soft cloth before using the caliper.
9. Checking and setting the origin before use
Clean the measuring surfaces by gripping a sheet of clean paper between the
outside jaws and then slowly pulling it out. Close the jaws and ensure that
the vernier scale (or display) reads zero before using the caliper. When using a
Digimatic caliper, reset the origin (ORIGIN button) after replacing the battery.
ORIGIN button sets display to zero
ORIGIN
Close jaws
completely
Battery
H
H
B
4. Parallax error when reading the scales
œœŽÊÃÌÀ>ˆ}…ÌÊ>ÌÊ̅iÊÛiÀ˜ˆiÀÊ}À>`Õ>̈œ˜Êˆ˜iÊ܅i˜ÊV…iVŽˆ˜}Ê̅iÊ>ˆ}˜“i˜ÌʜvÊ
ÛiÀ˜ˆiÀÊ}À>`Õ>̈œ˜Êˆ˜iÃÊ̜Ê̅iʓ>ˆ˜ÊÃV>iÊ}À>`Õ>̈œ˜Êˆ˜ið
vÊޜÕʏœœŽÊ>ÌÊ>ÊÛiÀ˜ˆiÀÊ}À>`Õ>̈œ˜Êˆ˜iÊvÀœ“Ê>˜ÊœLˆµÕiÊ`ˆÀiV̈œ˜Ê­®]Ê̅iÊ
apparent alignment position is distorted by 8Ê>ÃÊŜܘʈ˜Ê̅iÊw}ÕÀiÊLiœÜÊ
A caused by the step height (H) between the planes of
due to a parallax effect
A
̅iÊÛiÀ˜ˆiÀÊ}À>`Õ>̈œ˜ÃÊ>˜`Ê̅iʓ>ˆ˜ÊÃV>iÊ}À>`Õ>̈œ˜Ã]ÊÀiÃՏ̈˜}ʈ˜Ê>ÊÀi>`ˆ˜}Ê
iÀÀœÀʜvÊ̅iʓi>ÃÕÀi`ÊÛ>Õi°Ê/œÊ>ۜˆ`Ê̅ˆÃÊiÀÀœÀ]Ê̅iÊ-ÊÃ̈«Õ>ÌiÃÊ̅>ÌÊ̅iÊÃÌi«Ê
height should be no more than 0.3 mm.
The main scale of a caliper is engraved (or mounted on) stainless steel, and
although the linear thermal expansion coefficient is equal to that of the most
common workpiece material, steel, i.e. (10.2 ±1) ×10-6 / K, note that other
workpiece materials, the room temperature and the workpiece temperature
may affect measurement accuracy.
Δf
10. Handling after use
After using the caliper, completely wipe off any water and oil. Then, lightly
apply anti-corrosion oil and let it dry before storage.
Wipe off water from a waterproof caliper as well because it may also rust.
Δf
A
ΔX
D-36
11. Notes on storage
Avoid direct sunlight, high temperatures, low temperatures, and high humidity
during storage.
If a digital caliper will not be used for more than three months, remove the
battery before storage.
Do not leave the jaws of a caliper completely closed during storage.