Standard rack system (SRS) Standard racks being installed in a network room SME business Standard (SRS) .... the cost effective solution Today’s competitive data market requires cost effective solutions. Eaton’s B-Line Business Standard Rack System (SRS) is a fully featured, Data Centre compliant, 4-post rack designed to provide a cost-effective solution while meeting the demands of most data room applications. 18 EATON Data Centre Solutions Standard rack system (SRS) Standard SRS features • Patented 4-post corner design • Jacking feet fitted as standard • Bolt together construction with flat packed options • Earth bonding kit included as standard • Static load rating 1000kg • Various door options to suit application • Supplied with two pairs of 19” mounting rails • Various roof options to suit application • Unit height labels fitted to front and rear 19” mounting rails (numbered bottom to top) • Available in standard light grey or black • Earth bonding compliant EN60950-1 Jacking feet Castors Rack ID Secure point locking Handle options Adjustable rails 6. 4. 2. 1. Open frame structure Bolt together construction Load rating 1,000kg IP20 environmental rating Available assembled or flat packed Quick to assemble and easy to adjust Standard heights 42U to 47U Width 600mm and 800mm Depths 800mm, 1000mm, 1200mm • • • • • • • • 2. 5. 3. 2. Door features • • • 3-point hinging Single and double door variants Vented doors incorporate 80% perforated open area section 3. Locking options • • 3-point Espan locking as standard with keyed alike locks Upgrade options include: - Individually keyed locks - Mechanical combination locks - Electronic locking - Network configurable intelligent locking 1. 4. Side panel features • • 5. Mounting technologies Key locking Lift off sides • • • • • 19” square pierced rails 23” mounting option in 800W racks Full width mounting option in 800W racks Rails infinitely adjustable front to rear Fully EIA-310-E compliant 4. 6. Top panel options • • Range of upgradable top infill panel options including vented, cable entry and fan tray panels Fully customer configurable EATON Data Centre Solutions 19 Standard rack system (SRS) SRS Basic - specification Included as standard: • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • Doors configured left hand (LH) hinged as standard • Glazed front door • Plain steel rear door • Doors fitted with standard key locking swing handle with 3-point locking • Top panels configuration: basic brush entry panel rear, all other panels are plain • Plain locking side panels both sides Example order code: SB 42 808 PSGJ • Earth bonding kit • Available in standard light grey or black Width mm Configuration Basic Rack 600 800 Configuration see page 25 Application Depth mm 800 1000 1200 800 1000 1200 Build Sides Colour Base SB 42U 47U 608 608 610 610 612 612 808 808 810 810 812 812 P P S S L L J J See pages 6-7 for platform application compatibilty SRS Network - specification Included as standard: • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • Doors configured LH hinged as standard • Flat vented doors front and rear • Doors fitted with standard key locking swing handle with 3-point locking • • Example order code: SN 47 612 PSGJ Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides • Earth bonding kit • Available in standard light grey or black Width mm Configuration Network Rack 600 EATON Data Centre Solutions Configuration see page 25 Depth mm 800 1000 1200 800 1000 1200 Build Sides Colour Base SN 42U 47U 608 608 610 610 612 612 808 808 810 810 812 812 P P S S L L J J See pages 6-7 for platform application compatibilty 20 800 Application Standard rack system (SRS) SRS Active - specification Included as standard: • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • Doors configured LH hinged as standard • Flat vented front and rear door • Doors fitted with standard key locking swing handle with 3-point locking • Top panels configuration: basic brush entry panel rear, all other panels are plain • Plain locking side panels both sides • Air management baffle kit Example order code: SA 42 610 PSGJ • Earth bonding kit • Available in standard light grey or black Width mm Configuration Active Rack Application Depth mm SA 42U 47U 600 Configuration see page 25 1000 1200 Build Sides Colour Base 610 610 612 612 P P S S L L J J See pages 6-7 for platform application compatibilty SRS Active+ - specification Included as standard: • • Two pairs of 19” mounting rails Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • Single doors configured LH hinged as standard • Flat vented front door • Double vented rear door Doors fitted with standard key locking swing handle with multi-point locking • • Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides • Air management baffle kit • Earth bonding kit • Available in standard light grey or black Example order code: SE 47 610 PSGJ • Width mm Configuration Active+ Rack Application Depth mm SE 42U 47U 600 Configuration see page 25 1000 1200 Build Sides Colour Base 610 610 612 612 P P S S L L J J See pages 6-7 for platform application compatibilty EATON Data Centre Solutions 21 Standard rack system (SRS) SRS Switch - specification Included as standard: Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • Single doors configured LH hinged as standard • Flat vented front door • • Double vented rear door Doors fitted with standard key locking swing handle with multi-point locking • Top panels configuration: basic brush entry panel rear, all other panels are plain • Plain locking side panels both sides • Air management baffle kit • Earth bonding kit • Available in standard light grey or black Example order code: SS 42 810 PSGJ • Width mm Configuration Switch Rack 800 Configuration see page 25 Application Depth mm 800 1000 1200 Build Sides Colour Base SS 42U 47U 808 808 810 810 812 812 P P S S L L J J See pages 6-7 for platform application compatibilty SRS Switch+ - specification Included as standard: Example order code: SP 47 810 PSGJ • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • • Double vented doors front and rear Doors fitted with standard key locking swing handle with multi-point locking • Top panels configuration: basic brush entry panel rear, all other panels are plain • Plain locking side panels both sides • Air management baffle kit • Earth bonding kit • Available in standard light grey or black Width mm Configuration Switch+ Rack 800 Depth mm 800 1000 1200 Build Sides Colour Base SP 42U 47U 808 808 810 810 812 812 P P S S L L J J See pages 6-7 for platform application compatibilty 22 EATON Data Centre Solutions Configuration see page 25 Application Standard rack system (SRS) SRS Closed loop - specification Included as standard: • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Jacking feet • Doors configured LH hinged as standard • Glazed front door • Plain steel rear door Doors fitted with standard key locking swing handle with 3-point locking • • Top panels configuration: basic brush entry panel rear, all other panels are plain • Plain locking side panels both sides • Air management baffle kit Example order code: SL 42 612 PSGJ • Earth bonding kit • Available in standard light grey or black Width mm Configuration Closed loop Rack Application Depth mm SL 42U 47U 600 800 1200 612 612 812 812 Configuration see page 25 Build Sides Colour Base P P S S L L J J See pages 6-7 for platform application compatibilty SRS Cabling - specification Included as standard: • Two pairs of 19” mounting rails Front mounting rails fitted with cable management fingers • • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) Jacking feet • • • • • Example order code: SC 47 808 PSGJ • • Note: Can be configured with B-Line's high density in-line cooling modules, providing high cooling density single racks or pods. Please see thermal management section in this catalogue. • Doors configured LH hinged as standard • Glazed front door Plain steel rear door Doors fitted with standard key locking swing handle with 3-point locking Top panels configuration: basic brush entry panel all positions Plain locking side panels both sides Earth bonding kit Available in standard light grey or black Width mm Configuration Cabling Rack 800 Configuration see page 25 Application Depth mm 800 1000 1200 Build Sides Colour Base SC 42U 47U 808 808 810 810 812 812 P P S S L L J J See pages 6-7 for platform application compatibilty EATON Data Centre Solutions 23 Standard rack system (SRS) SRS - family table SRS Standard rack system SRS Frame Doors Roof Basic SB Frame configuration 4 post Front door Glass Rear door Plain steel Top cover - rear Network SN 4 post Active SA 4 post Active+ SE 4 post Flat vented Flat vented Flat vented Brush strip panel Brush strip panel Brush strip panel Brush strip panel Plain full panel Plain full panel Plain full panel Plain full panel None None Fitted Fitted None None None None Flat double vented Top cover - middle Top cover - front 1000 deep infill Top cover - front 1200 deep infill Air flow Top and bottom baffles Vertical baffles Twist & lock cable management arms Cable support Vert cable management fingers single (RCM) Cable spool arms Vert cable management fingers pair (RCM) SRS Standard rack system SRS Frame Doors Roof Switch SS Switch+ SP 4 post Closed Loop SL Frame configuration 4 post Front door Flat vented Rear door Flat double vented Top cover - rear Brush strip panel Brush strip panel Brush strip panel Plain full panel Plain full panel Plain full panel Flat double vented 4 post 4 post Plain glazed Plain glazed Plain steel Plain steel Top cover - middle Top cover - front 1000 deep infill Brush strip panel Top cover - front 1200 deep infill Air flow Top and bottom baffles Vertical baffles Cabling SC Plain full panel Fitted Fitted Fitted None None None None Twist & lock cable management arms Cable support Vert cable management fingers single (RCM) Cable spool arms Vert cable management fingers pair (RCM) 24 EATON Data Centre Solutions None Fitted front Access™ Standardrack racksystem system(ARS) (SRS) SRS - part number configuration Width mm Standard Racks 600 800 Application Depth mm 800 1000 1200 800 1000 1200 Build Sides Colour Base SB SN SA SE SS SP SL SC 42U 42U 42U 42U 42U 42U 42U 42U 608 608 - 610 610 610 610 - 612 612 612 612 612 - 808 808 808 808 808 810 810 810 810 810 812 812 812 812 812 812 P P P P P P P P S S S S S S S S L L L L L L L L J J J J J J J J SB SN SA SE SS SP SL SC 47U 47U 47U 47U 47U 47U 47U 47U 608 608 - 610 610 610 610 - 612 612 612 612 612 - 808 808 808 808 808 810 810 810 810 810 812 812 812 812 812 812 P P P P P P P P S S S S S S S S L L L L L L L L J J J J J J J J 42U racks Basic Network Active Active+ Switch Switch+ Closed Loop Cabling 47U racks Basic Network Active Active+ Switch Switch+ Closed loop Cabling Example Order Code SL 47 612 Type “U” Height Width Depth P S L J Build Sides Colour P = Assembled & palletised (non configured options) S = With sides B = Black Base C = Jacking feet & castors K = Flat packed N = Without sides L = Grey J = Jacking feet L = LH side only P = Plinth & jacking feet R = RH side only Q = Option “P” + castors EATON Data Centre Solutions 25
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users