Sealed Weather-Proof Construction
Smaller
Lighter
More Powerful
Made in USA
Uninterruptible Power Supply
Military Grade UPS
(Uninterruptible Power Supply)
SynQor’s UPS is designed for the extreme environmental and demanding electrical conditions of Military/
Aerospace applications. SynQor’s UPS incorporates field proven high efficiency designs and rugged
packaging technologies. This UPS will accept a wide range of input voltage and frequency values while
delivering a well-conditioned AC output to the load. Its use of lithium polymer batteries permits the lowest
profile and lowest weight solution in its power class. It is designed and manufactured to comply with a
wide range of military standards. Options include a DC output and the ability to also draw power from a
military standard 28VDC input.
Sealed
Shock-Proof
Weather-Proof
Construction
Features
• Sealed, weather-proof, shock-proof construction
• Hot swappable internal battery pack (lithium polymer)
• >10 minute run-time at full power
• 1250W (1500VA) output power
• Full power operation: -20°C to +55°C
• Universal AC input: 80-265VAC; 47-65Hz
• Power factor correction at AC input
• Dual input (AC and optional DC)
• True on-line double conversion
• Cold start with no AC or DC input connections
• Pure sinusoidal AC output voltage (115VAC, 60Hz)
• Handles 0.0—1.0 power factor loads and non-linear loads
• Up to 3 units can be combined for higher power,
voltage or a 3-phase AC output
• User I/O and Configuration signal ports
• 1U high rack mount unit (17” x 21.6”)
• Low weight: 32 lbs. (including battery)
1.25kW 1U Model
Safety & Qualifications
• IEC 62133 Safety requirements for portable secondary
sealed cells
• ST/SG/AC.10/11/Rev.5 UN Recommendations on the
Transport of Dangerous Goods
• UL 1642 Lithium Batteries
• IEC 62040-1 General and safety requirements for UPS
• IEC 62040-2 UPS Electromagnetic compatibility (Category C4)
*Options
• DC input (28Vnom) for dual source
• 2U Extended battery pack gives >24 minutes of run-time
• 47Hz — 800Hz AC input
• 115Vrms or 230Vrms AC output
Specification Compliance
• 50Hz or 400Hz output
UPS-1500 units are designed to meet:
• DC1: Auxiliary isolated DC output (up to 500W)
•
MIL-STD-1399-300B - Interface Std for Shipboard Systems
• DC2: High power DC output (up to 1250W)
parallelable for higher power
• MIL-STD-810G - Environmental Engineering Considerations
• Shipboard version with floating neutral wire
• MIL-STD-461F - Electromagnetic Interference
• MIL-STD-704F - Aircraft Electrical Power Characteristics
• MIL-STD-1275D - Vehicle Electrical Power Characteristics
Designed and manufactured in the United States of America
MADE IN USA
TECHNICAL eLECTRICAL CHARACTERISTICS
INPUT CHARACTERISTICS
Operating AC Input
Voltage
Frequency
(Extended Option)
Input Power Factor
Maximum Input Current Continuous
AC Input Circuit Breaker Rating
(* Power Derating to 80% below 90Vrms)
Operating DC Input (Optional)
Voltage
Continuous Maximum Input Current
Transient Maximum Input Current
OUTPUT CHARACTERISTICS
Total Output Power Continuous
Maximum DC1 Output Power
Maximum DC2 Output Power
80-265Vrms*
47-65Hz*
(47-800Hz Optional)
>0.98 at 47-65Hz
>0.97 at 400Hz
>0.93 at 800Hz
20A (full load, 85Vrms)
25A
22-33V
62A (full load, 22V)
75A
1250W (1500VA)
510W
1250W
(Note: Available AC power is reduced by power delivered to the DC output)
AC Output
AC Output Waveform
Voltage
Frequency
Peak Load Current
Pure Sinusoidal
115Vrms ± 3%
230Vrms ± 3%
60Hz ± 0.5%
50Hz ± 0.5%
400Hz ± 0.5%
26A (115Vrms)
13A (230Vrms)
0-1.0 (leading or lagging)
2% (1000W resistive load)
Load Power Factor
Total Harmonic Distortion
DC Output [DC1] (optional)
Voltage Regulation (Over Load & Temperature) ± 3%
Common Voltage /Power combinations
12V at 25A= 300W
(Other Options Available)
15V at 25A= 375W
24V at 21A= 504W
28V at 18A= 504W
40V at12.5A= 500W
50V at 10A= 500W
DC Output [DC2] (optional)
Voltage Setpoint
± 3%
Load regulation
-10%
(Output droops vs. load to allow passive sharing among modules.)
Common Voltage/Power combinations (DC2)
24V at 45A=1050W
28V at 45A=1250W
LITHIUM-POLYMER BATTERY CHARACTERISTICS
Standard 1U Battery Pack Run Time
1250W : 10 min
|
1000W : 13 min
|
625W : 21 min
Optional 2U Extended Battery Pack Run Time
1250W : 24 min
|
1000W : 31 min
|
625W : 50 min
Recharge Time (to 90% charge)
Standard
Total Output Power
< 1000W
2 hrs
Optional 2U Extended Battery Pack
Total Output Power
< 1000W
4 hrs
Temperature Range for Recharge: 0°C to 45°C
Internal heaters maintain battery temperature above 0°C when input power
is present.
Battery charging only enabled below +45°C.
ENVIRONMENTAL CHARACTERISTICS MIL-STD-810G
MTBF
100kHrs
MIL-217F Ground Benign, Ta=25°C
Temperature Methods 501.5, 502.5
Operating Temperature
-20°C — +55°C
Storage Temperature
-20°C — +65°C
Altitude Method 500.5
Operating
0 - 15,000 ft
Non-operating
0 - 40,000 ft
Environmental Tests
Shock/Drop
Method 516.6, Procedures 1,4,6
Vibration
Method 514.6, Procedure 1,2
Fungus
Method 508.6
Salt Fog
Method 509.5
Sand and Dust
Method 510.5, Procedures 1,2
Rain
Method 506.5
EMI
MIL-STD-461F
Humidity
Method 507.5
Mechanical Vibrations of
Method 528
Shipboard Equipment
Electromagnetic Capability MIL-STD-461F
CE101
30 Hz - 10 kHz
CE102
10 kHz - 10 MHz
CS101
30 Hz - 150 kHz
CS106
10 kHz - 40 GHz
CS114
10 kHz - 200 MHz
CS116
10 kHz - 100 MHz
RE101
30 Hz - 100 kHz
RE102
10 kHz - 18 GHz
RS101
30 Hz - 100 kHz
RS103
2 MHz - 40 GHz
MECHANICAL CHARACTERISTICS
Standard 1U Battery Pack
Chassis Size (H x W x D)
1.73"(1U) x 17" x 21.6"
Case Material
Aluminum
Total Weight
32 lbs. (with chassis & battery)
Optional 2U Extended Internal Battery Pack
Chassis Size (H x W x D)
3.33"(2U) x 17" x 21.6"
Case Material
Aluminum
Total Weight
50 lbs. (with chassis & battery)
Connectors
AC Input Connector
MS3470L14-4P
DC Input Connector
MS3470L18-8P
AC Output Connector
MS3470L14-4S
DC Output Connector
MS3470L14-4SW
2nd DC Output Connector
MS3470L18-8S
User I/O Ports
HD DB15 Female
Configuration I/O Port
HD DB15 Male
SNMP Connector
RJF6N
Cooling Exhaust Fans
Sound Pressure Level (SPL) 54 dB(A)
Air Flow
0.67(m3/min) 23.7 CFM
Two fans in system, above specs are for each fan separately.
Military Grade Uninterruptible Power Supply
Options
Model Number
Power
Battery
Run-Time
@ Full
Power
(80% Power)
UPS-1500-S-1U
(1 Standard Battery Pack)
1250W
1500VA
>10 min.
(>13 min.)
1U
32 lbs.
•
500W DC1
1250W DC2
•
•
•
•
UPS-1500-E-2U
(1 Extended Battery Pack)
1250W
1500VA
>24 min.
(>31 min.)
2U
50 lbs.
•
500W DC1
1250W DC2
•
•
•
•
UPS-3000-S-2U
(2 Standard Battery Packs)
2500W
3000VA
>10 min.
(>13 min.)
2U
64 lbs.
•
1000W
(2x500W)
•
•
•
•
UPS-3000-E-4U
(2 Extended Battery Packs)
2500W
3000VA
>24 min.
(>31 min.)
4U
98 lbs.
•
1000W
(2x500W)
•
•
•
•
Height
Weight
DC Input
DC Output
(28V nom)
AC Input AC Output AC Output
Floating
Frequency
Voltage
Frequency
Neutral
AC Output (47-65Hz or (115Vrms or (50Hz, 60Hz
230Vrms)
or 400Hz))
47-800Hz)
UPS
Output Power
Battery Pack
Size
Height
AC Input
Frequency
AC Output
Voltage
AC Output
Neutral Wire
AC Output
Set Point
Frequency
UPS
1500
E
2U
L
1
G
6
UPS
1500: 1500VA
1250W
3000: 3000VA
2500W
DC Input
D
S: Not Installed
D: DC Input
S:Standard 1U:1.73" L:47-65Hz 1:115Vrms G:Grounded 5: 50Hz M: DC2 Out
E:Extended 2U:3.48"
6: 60Hz
24VDC
W:47-800Hz 2:230Vrms F:Floating
N:No Battery
4:400Hz R: DC2 Out
28VDC
DC
Output
Voltage
Additional
Options
28
000
00:None
12:12V 0
00:Standard
24:24V 0CE:CE Marking
28:28V E00:Ethernet /
40:40V
SNMP
50:50V
Not all combinations make valid part numbers, please contact SynQor for availability. See the Product Summary web page for more options.
Part Number Examples:
UPS-1500-E-2U-L1G6D28-000, UPS-1500-S-1U-L2G5S00-000
UPS-1500-S-1U-L2G5S00-0CE (230V output with CE marking)
block diagram
AC
INPUT
DC
INPUT or
2nd DC OUTPUT
AC to DC
w/ PFC
and
ISOLATION
ISOLATED
INVERTER
AC
OUTPUT
ELECTRONIC
SWITCH /
Non-Isolated
DC-DC Converter
ISOLATED
DC/DC
CONVERTER
DC
OUTPUT
(OPTIONAL)
(OPTIONAL)
BATTERY
with
CHARGER
and
ELECTRONIC SWITCH
BULK ENERGY
STORAGE
CAPACITOR
Military-Grade Power
P
A
C
K
A
G
E
UPS products are available in a variety of rack mounting and extended
battery configurations. See the website for data sheets with more details.
Status LED
Status Indicator Panel
Front Panel
1.73"
Status LED
1U
Front Panel
On/Off
Air intake
17.00"
Rear Panels
On/Off
Switch
DC
Output
Status Indicator Panel
DC1
Output
Option
AC
Output
DC1
Output
Option
AC
Output
Fan
Exhaust
AC
Output
Exhaust
Fan
Exhaust
Fan
Rear Panel
Ethernet I/O USER Ground DC
Port Port CONFIG Stud Input
Port (1/4-20) Option
Option
COMM/AUX Ground DC
Port
Stud Input
USER Ground DC2
Ethernet I/O (1/4
-20) Stud Output
Port Port CONFIG
Port (1/4-20) Option
Option
AC
Input
Exhaust
Fan
Fan
Exhaust
AC
Input
Exhaust
Fan
AC Circuit
Breaker
AC Circuit
Breaker
AC
Input
AC Circuit
Breaker
Side View
Top View
Hot swappable
battery pack
21.60"
Visit our website for
more information
UNIT MOUNTING HOLES
8-32 .250
x26
1.21"
Advancing The Power Curve®
Founded in 1997, SynQor® has become the technology, quality and service
leader for high efficiency DC-DC converters for the telecom/datacom
marketplace. The PowerQor®, BusQor®, DualQor®, iQor™, and NiQor® product
lines, combined with SynQor’s unmatched lead-times, flexibility, design support
and lowest total cost of ownership have become the benchmark sought by
SynQor’s worldwide customer base.
In 2004, SynQor began its successful entry into the industrial, medical and
military market segments with the InQor ®, ACuQor ® and MilQor ® product lines.
These new technology leading DC-DC and AC-DC product lines have enabled
customers to realize vast savings in space, weight and overall system costs
while dramatically increasing power densities and end-system performance.
Equally important is the service and support advantage SynQor has brought to
customers in these market segments.
Headquartered in Boxborough, Massachusetts, at the location of its
manufacturing operations, SynQor is a privately owned U.S. ISO 9001 company.
With a design center in Dallas, Texas, and sales/marketing offices throughout
the World, SynQor quickly became the technology, quality and service leader
for high efficiency DC-DC converters.
SynQor’s converters feature a patented two-stage power topology that greatly
improves efficiency and optimizes the power dissipated by the converter.
SynQor’s rugged DC-DC converters, AC-DC converters, filters and systems
are designed for a wide range of industrial and military applications including
those required to withstand harsh environments: railway and transportation
systems, industrial motion control, information displays, factory automation,
critical military and power generation systems.
The Military series of Unintrerruptible Power Supply units (UPS), Hi-Rel and
Mil-COTS DC-DC converters and EMI filters brings SynQor’s field proven highefficiency synchronous-rectifier technology to the Military/Aerospace industry.
SynQor Headquarters
155 Swanson Road Boxborough, MA 01719-1316
Phone: 978-849-0600 Fax: 978-849-0602
Toll Free (USA): 888-567-9596
E-mail: mqnbofae@synqor.com
www.SynQor.com
Information furnished by SynQor is believed to be accurate and reliable. However, no responsibility is assumed
by SynQor for its use, nor for any infringements of patents or other rights of third parties which may result from its
use. No license is granted by implication or otherwise under any patent or patent rights of SynQor.
005-0006128 - Rev 1 01.31.14