School of Engineering
Faculty Publications 2011
Articles published in refereed journals
Fan, X., and Yen, J., “Modeling Cognitive Loads for Evolving Shared Mental Models in Human–Agent
Collaboration,” IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, vol. 41, no. 2,
pp. 354-367, 2011.
Fang, T., Zhang, J., Zhong, Y., and Tao, H., “Unsteady Viscous Flow over an Expanding Stretching
Cylinder,” Chinese Physics Letters, vol.28, no.12, pp. 124707, 2011.
Fang, T., and Zhong, Y., “Reply to ‘Comment on “Unsteady Stagnation-Point Flow Over a Plate Moving
Along the Direction of Flow Impingement,” by Y. Zhong and T. Fang, International Journal of Heat Mass
Transfer, vol. 54, pp. 3103-3108, 2011,’” International Journal of Heat and Mass Transfer, in press, doi:
10.1016/j.ijheatmasstranser.2011.09.040, 2011.
Hamdorf, A., Olson, M., Lin, C. H., Jiang, L., Zhou, J., Xiao, H., and Tsai, H. L., “Femtosecond and
Nanosecond Laser Fabricated Substrate for Surface–Enhanced Raman Scattering,” Optics Letters, vol. 36,
no. 17, pp. 3353-3355, 2011.
Michael, R. J., Johnson, D., Yantek, D., Ferro, E., and Swope, C., “Development of Elastomeric Isolators
to Reduce Roof Bolting Machine Drilling Noise,” Noise Control Engineering Journal (NCEJ), vol. 59, iss. 6,
pp. 591-612, November 2011.
Nagarajan, D. A., Murthy-Bellur, D., and Kazimierczuk, M. K., “Harmonic Winding Losses in the
Transformer of a Forward Pulse Width Modulated DC–DC Converter for Continuous Conduction Mode,”
IET Power Electronics, (published online at doi: 10.1049/iet-pel.2011.0017), 16 pp., 2011.
Kazimierczuk, M. K., and Murthy-Bellur, D., “Loop Gain of the Common-Gate Colpitts Oscillator,” IET
Circuits, Devices & Systems, vol. 5, no. 4, pp. 275-284, May 2011.
Murthy-Bellur, D., Kondrath, N., and Kazimierczuk, M. K., “Transformer Winding Loss Caused by Skin and
Proximity Effects Including Harmonics in Pulse-Width Modulated DC-DC Flyback Converters For the
Continuous Conduction Mode,” IET Power Electronics, vol. 4, no. 4, pp. 363-373, April 2011.
Murthy-Bellur, D., and Kazimierczuk, M. K., “Zero-Current-Transition Two-Switch Flyback Pulse-Width
Modulated DC-DC Converter,” IET Power Electronics, vol. 4, no. 3, pp. 288-295, March 2011.
Murthy-Bellur, D., and M. K. Kazimierczuk, “Isolated Two-Transistor Zeta Converter with Reduced
Transistor Voltage Stress,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 58, no. 1, pp.
41-45, January 2011.
Parente, D. H., Filbeck, M. G., and Roth, J. T., “Learning Style Preferences in Cross-Functional
Teams: Discipline-Specific or Personality-Related?” Journal of Behavorial Studies in Business, 20 pp.,
December 2011.
Sweeney, S., “Determining Isolator Damping for Minimized Response from Impulse: A Theoretical
Approach,” SAE International Journal of Commercial Vehicles, vol. 4, no. 1, pp. 155-162,
doi: 10.4271/2011-01-2239, October 2011.
Wallace, A., Cooney, T. E., Englund, R., and Lubahn, J. D., “Effects of Interleukin-6 Ablation on Fracture
Healing in Mice,” Journal of Orthopaedic Research, vol. 29, no. 9, pp. 1437-1442, September 2011.
Will, R., Englund, R., Lubahn, J., and Cooney, T. E., “Locking Plates Have Increased Torsional Stiffness
Compared to Standard Plates in a Segmental Defect Model of Clavicle Fracture,” Archives of Orthopaedic
and Trauma Surgery, vol. 131, pp. 841–847, 2011.
Yao, S., Fang, T., and Zhong, Y., “Heat Transfer of a Generalized Stretching/Shrinking Wall Problem with
Convective Boundary Conditions,” Communications in Nonlinear Science and Numerical Simulation, vol.
16, pp. 752-760, 2011.
Zhang, J., Fang, T., and Zhong, Y., “Analytical Solution of the Magnetohydrodynamic Sink Flow,” Applied
Mathematics and Mechanics (English Edition), vol. 32, no. 10, pp. 1-10, 2011.
Zhong, Y., and Fang, T., “Unsteady Stagnation-Point Flow over a Plate Moving Along the Direction of Flow
Impingement,” International Journal of Heat and Mass Transfer, vol. 24, no.15-16, pp. 3103-3108, 2011.
Zhong, Y., Fang, T., and Wert, K. L., “An Adsorption Air Conditioning System to Integrate with the Recent
Development of Emission Control for Heavy-Duty Vehicles,” Energy, vol. 36, pp. 4125-4135, 2011.
Articles published in refereed proceedings
Beaumont, J. P., “From Art to Science - Design & Production of Medical Plastic Components,”
International Medical Device Conference, Chicago, IL, October 2011.
Coulter, J. P., Beaumont, J. P., Bekisli, B., and Slye, K. R, “Intelligent Melt Rotation against Shear-Induced
Filler Migration in Injection Molding,” Proceedings, National Science Foundation CMMI Grantees
Conference, (on CD, Grant No: 1031642), Atlanta, GA, January 2011.
Edwards, R., and Lobaugh, M., “Mini-Projects as Part of a Freshman Seminar for Mechanical Engineering
Technology Students,” Proceedings, American Society for Engineering Education Annual Conference and
Exposition, AC 2011-2118, Vancouver, BC, June 2011.
Edwards, R., and Demetrio, T., and Johnson, D., “Resurrecting the Electrolytic Plotting Tank,”
Proceedings, American Society for Engineering Education Annual Conference and Exposition, AC 20111819, Vancouver, BC, June 2011.
Fan, X., and Su, M., “Multi-Agent Diffusion of Decision Experiences,” Proceedings, 23rd IEEE International
Conference on Tools with Artificial Intelligence, pp. 321-328, Boca Raton, FL, November 2011. [Principal
author]
Fan, X., and Su, M., “The Impact of Splitting Granularity on Multi-Agent Diffusion Computing,” Proceedings,
2011 IEEE/WIC/ACM International Conference on Intelligent Agent Technology, pp. 216-219, Lyon,
France, August 2011.
Ford, M., Davé, V., and Holliday-Darr, K., “Introduce Engineering to 6th Graders Via ‘Speed Dating,’”
American Society of Engineering Educators Conference & Exposition, Vancouver, BC, Canada, June 2011.
Lasher, W. C., and Ranzenbach, R., “To Twist or Not to Twist? – A Scientific Attempt to Understand What
We Think We Already Know About Sail Trim,” Proceedings, 2011 Chesapeake Sailing Yacht Symposium,
pp. 101-112, Annapolis, MD, March 2011.
Lobaugh, M., and Edwards, R., “Mechatronics for Non-Electrical Engineers,” Proceedings, American
Society for Engineering Education Annual Conference and Exposition, AC 2011-2042, Vancouver, BC,
June 2011.
Loker, D., Wu, Y., Voss, M., Roth, J. T., and Strom, S., “Wireless Nerve Positional Control of Prosthetic
Device,” Proceedings, ASME 2011 International Mechanical Engineering Congress & Exposition
Conference, IMECE2011-63891.pdf, 6 pp., Denver, CO, 2011.
Loker, D., Weissbach, R., and Henry, A., “Conveyor Control System Project,” Proceedings, Annual
Meeting, American Society for Engineering Education Annual Conference, Session M542, no. 1607, (pdf on
CD-ROM), 14 pp., Vancouver, British Columbia, Canada, 2011.
Murthy-Bellur, D., and Kazimierczuk, M. K., “Active-Clamp ZVS Two-Switch Flyback Converter,”
Proceedings, IEEE International Symposium on Circuits and Systems, pp. 241-244, Rio de Janeiro, Brazil,
May 15-18, 2011.
Nelatury, S. R., Onipede, O., and Gray, R., “Effect of Dielectric Layer on the Response Times of
Electrostatic MEMS Switches,” Proceedings of SPIE, vol. 8031, 6 pp., Orlando World Center Marriot Resort
& Convention Center, Orlando, FL, April 25-29, 2011.
Nitterright, F., Michael, R. J., Murosky, C. J., and Ragen, M.A., “Undergraduate Design: Design of
Reusable Stir Friction Welding Tools,” American Society of Engineering Education (ASEE) Annual
Conference and Exposition, 7 pp., Vancouver, British Columbia, Canada, June 2011.
Slye, K. R., Coulter, J. P., Bekisli, B., Skiba, T. J., and Beaumont , J. P., “The Effect of Melt Rotation
Technology on Particle Distribution during Injection Molding,” Society of Plastics Engineers Annual
Technical Conference (ANTEC), Orlando, FL, May 2011.
Sweeney, S., Lateral Vibration Prediction of Drivelines Having a Flexible Coupling, SAE International, no.
2011-01-2238, September 2011.
Throckmorton, A. L., Carr, J. P., Tahir, S. A., Tate, R., Downs, E. A., Bhavsar, S. S., Wu, Y., Grizzard, J.
D., and Moskowitz, W. B., “Mechanical Cavopulmonary Assistance of a Patient-Specific Fontan Physiology:
Numerical Simulations, Lumped Parameter Modeling, and Suction Experiments,” Artificial Organs, vol. 35
no. 11, pp. 1036-47, November 2011.
Walters, E. G., and Schulte, M. J., “Truncated-Matrix Multipliers with Coefficient Shifting,” Proceedings,
Forty-Fifth Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, CA, November 2011.
Warley, R. L., “Effectiveness of a Thermal Protective Coating for Automotive Components,” 180th
Technical Meeting of American Chemical Society Rubber Division, Paper #46, Cleveland OH, October
2011.
Weissbach, R., Rynders, M., and Loker, D., “Phase Lock Loop Control System Lab Development,”
Proceedings, Annual Meeting, American Society for Engineering Education Annual Conference, Session
M133G, 1150, (pdf on CD-ROM), 11 pp., Vancouver, B.C., Canada, 2011.
Young, B., “Challenges in Teaching e-Learning Courses for Plastics Engineering Technology,” Society of
Plastics Engineers Annual Technical Conference, ANTEC 2011, 5 pp., Boston, MA, 2011.
Zhou, J., Khalilolahli, A., and Tsai, H. L., “Modeling of Transport Phenomena and Thermal Stress in Spot
Laser Keyhole Welding”, Proceedings of NAMRI/SME, vol. 39, Corvallis, Oregon, USA, June 2011.
Zhou, J., and Khalilollahli, A., “Thermal Stress Analysis of 304 Stainless Steel Joints by Spot Laser
Keyhole Laser Welding”, 23rd Canadian Congress of Applied Mechanics, Vancouver, British Columbia,
Canada, June 2011.
Parts of books
Zhou, J., Tsai, H. L., and Wang, P.C., “Hybrid Laser-Arc Welding in Aerospace Engineering,” Chapter 4 in
Welding and Joining of Aerospace Materials, Cambridge, UK: Woodhead Publishing, Ltd, ISBN: 978 1
84569 532 3, December 2011.
Articles published in non-refereed proceedings
Cook, V. G., and Ali, A., “Fighting Failure with the Internet: Web-Based Collaborative Methods Facilitate
FMEA Process,” Industrial Engineer, vol. 43, no. 6, pp. 31-36, June 2011.
Murthy-Bellur, D., and Kazimierczuk, M. K., “Design of Loosely Coupled Wireless Power Transfer
Systems,” Proceedings, Electrical Insulation Conference and Electrical Manufacturing Expo, 8 pp.,
Nashville, TN, September 19 - 21, 2011.
Articles in trade magazines
Nelatury, S., and Sadiku, M. N. O., “IPTV: An Alternative to Traditional Cable and Satellite Television,”
IEEE Potentials Magazine, vol. 30, no. 4, pp. 44-46, July/August 2011.