www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Type CC
Lamp Striation Control
Normal Ballast Factor
QHE T8 ISN CC
High Efficiency Series
Lamp/Ballast Guide
32W T8 - OCTRON® lamps
1-lamp QHE1x32T8/UNV-ISN-SC-1
2-lamp QHE2x32T8/UNV-ISN-SC-1
3-lamp QHE3x32T8/UNV-ISN-SC-1
4-lamp QHE4x32T8/UNV-ISN-SC-1
Also operates:
FBO32, FBO31, FO25, FBO24, FO17, FBO16,
FO30/SS (30W), FBO30/SS (30W), FBO29/SS
(29W), FO28/SS (28W) &
FO25/SS (25W)
Display lamps:
FO13, FO14, FO21 & FO28
Preheat lamps:
F15T8, F25T8 & F30T8
F40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L ballast;
3 lamps on 4L ballast
Key System Features
•High Efficiency Systems over
90% efficient
•NEMA Premium Electronic Ballast
Program compliant
•UL Type CC Rated (Commercial Cabinet)
•Lamp Striation Control (LSC)
•Min. Starting Temp:
• -20°F(-29°C) for T8 lamps
• 60°F (16°C) for Energy Saving T8 lamps
• 0°F (-18°C) for FO40T8 lamps
•Flexible De-Lamp Combinations —
see wiring diagrams on next page
•QHE ballasts meet the most demanding
utility rebate standards
•30-50% energy savings
•RoHS compliant
•Lead-free solder and manufacturing
process
Application Information
SYLVANIA QUICKTRONIC
High Efficiency (QHE) ballasts
are ideally suited for:
UL Type CC
•Refrigerated cases*
•Walk-in coolers*
•Commercial cabinets
•Display cases
•Applications that could expose lamp
and sockets to vibration and potential
movement
*T8 energy saving lamps should not be used in
applications below 60°F lamp ambient.
Lamp Striation Control (LSC)
•General lighting applications where energy
saving T8 lamps may striate, particularly
for the F25 energy saving T8 lamps.
ECS207R1 - 8/2011
SYLVANIA QUICKTRONIC High Efficiency, (QHE)
Type CC energy saving electronic T8 ballasts
offer four major advantages:
1. S
ame Light, Less Power!
• Up to 6% in energy savings compared to
standard T8 low power electronic ballasts
without compromising light output
• 3 0-44% energy savings when compared
to F40T12 magnetically ballasted systems
2. U
L Type CC compliant: ballasts utilize a
micro-controller based circuit to reduce
arcing caused by loose connections or
improper lamp pin to socket connections.
3. L amp Striation Control (LSC): T8 energy
saving lamps should be operated above
60°F, but under certain conditions the lamps
may striate. LSC circuitry may minimize or
eliminate this condition; however there are
limited applications where LSC circuitry
may not entirely mitigate lamp striations.
(Please consult lamp manufacturers for
additional details.)
4. N
EMA Premium Electronic Ballast Program
compliant. The program promotes the use
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
• Parallel circuity - keeps remaining
lamps lit if one or more go out
• Very low harmonic distortion (<10%)THD
• Operate at >42kHz to reduce potential
interference with infrared control systems
of high efficiency T8 electronic ballasts by
meeting or exceeding the Ballast Efficiency
Factors, (BEF) established by the CEE,
(Consortium for Energy Efficiency). For
additional information on this program go to:
www.cee1.org or www.nema.org
These ballasts are also RoHS compliant and
feature lead-free solder and manufacturing
process.
Lamp &
System Initial
Ballast Type
Watts
LPW
MeanRelative
%
SystemLight Lamp
LumensOutput % Life
@ 8000
@ 8000
Energy
@3hrs/
Hours
Hours
Savings
start
2-FO32/700 QTP 2x32 ISN
59
2-FO32/800/XP
QHE 2x32 ISN-1
55 95 4905112% 7%160%
2-FO30/SS
QHE 2x32 ISN-1
52 95 4660 106% 12%160%
2-FO28/SS
QHE 2x32 ISN-1
48 99 4455 102% 19%160%
2-FO25/SS
QHE 2x32 ISN-1
44 98 4050 92% 25%160%
84
4435 Baseline BaselineBaseline
% Relative Light Output
% System Wattage
120%
100%
100% 100%
112% 7%
Energy
Savings
93%
106%
12%
Energy
Savings
88%
80%
102%
19%
Energy
Savings
81%
92% 25%
Energy
Savings
75%
60%
40%
20%
0%
2-FO32/700
QTP 2x32 ISN
2-FO32/800/XP
QHE 2x32 ISN-1
2-FO30/SS
QHE 2x32 ISN-1
2-FO28/SS
QHE 2x32 ISN-1
2-FO25/SS
QHE 2x32 ISN-1
Catalog #
Date
Project
Prepared by
High Efficiency
High Efficiency UNV (120-277V) Type CC & Lamp Striation Control
Performance Guide
Item
Number
Description
49381 Input Rated Ballast
InputSystem
Current
Lamp Lumens No. of Factor System
Mean
Wattage Efficacy
(AMPS)
Type
(lm)
Lamps
(BF)
Lumens Lumens
(W)
(lm/W)
QHE1x32T8/UNV-ISN-SC-1
1
1
1
1
1
0.87
0.87
0.87
0.87
0.87
2435
2610
2480
2370
2155
2190
2455
2330
2230
2025
28
87
3.11
28
93 3.11
27/26 92/95 3.35
25/24 95/99 3.63
23/22 94/98 3.95
0.47/0.20FO32/7002800
0.47/0.20FO32/XP3000
0.44/0.19FO30/SS2850
0.40/0.18FO28/SS 2725
0.37/0.16FO25/SS2475
2
2
2
2
2
0.87
0.87
0.87
0.87
0.87
4870
5220
4960
4740
4305
4385
4905
4660
4455
4050
55
89
1.58
55
95 1.58
52
95 1.67
48/47 99/101 1.85
44/43 98/100 2.02
QHE3x32T8/UNV-ISN-SC-1
Banded Pack
0.68/0.30FO32/7002800
0.68/0.30FO32/XP3000
0.65/0.28FO30/SS2850
0.61/0.26FO28/SS 2725
0.55/0.23FO25/SS2475
3
3
3
3
3
0.87
0.87
0.87
0.87
0.87
7305
7830
7440
7110
6460
6575
7360
6990
6685
6070
82/81
82/81
77/76
72/71
65/64
49387 0.92/0.39FO32/7002800
0.92/0.39FO32/XP3000
0.86/0.37FO30/SS2850
0.80/0.35FO28/SS 2725
0.74/0.31FO25/SS2475
4
4
4
4
4
0.87 9745
0.87 10,440
0.87 9920
0.87 9485
0.87 8615
49383 QHE2x32T8/UNV-ISN-SC-1
Banded Pack
49385 QHE4x32T8/UNV-ISN-SC-1
Banded Pack
cation, cap any blue lead.
o 600 volts.
ONIC 2x32
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Blue
Black
Black/White Blue
BALLAST
White
White BALLAST
BALLAST
Red
Red
Blue
Blue
Blue
Black
White
Red
Black
BALLAST
Black
BALLAST
Blue
White
White
Red
Red
Black
White
Red
Blue
Blue
BALLAST
LAMP
LAMP
BALLAST
Dimensions:
Overall: 9.5" L x 1.68" W x 1.18" H
Black
Mounting: 8.90"
Blue
Black
Blue
White
BALLAST
White Blue BALLAST
LAMP
Red
Red
Height
Yellow
LAMP
Red
Wiring:
QUICKTRONIC
Leads only (no connectors
provided) FM (2 LAMP)
IC FM (1 LAMP)
ound wire to terminal required.
8.70 mm
Slot
peration below
O
50°F (10°C) may affect light
Yellow
Red LAMP
output or lamp operation
– see “Low Temp.
Red
Red
LAMP
Starting” definition.
Note: For QT-FM green ground wire to terminal required.
Note: For three lamp application, cap any unused blue lead.
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
QUICKTRONIC 4x32
QUICKTRONIC 4x32
QUICKTRONIC 4x32
Red
Blue
Yellow2
LAMP
LAMP
Red
Red
LAMP
LAMP
QUICKTRONIC
QUICKTRONIC
FM (2 LAMP) FM (1 LAMP)
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
FMwirewith
(2to LAMP)
LAMPFM (1 LAMP) Note: For QT-FM green ground
Note:
QT-FM green
ground
terminal required.
wireFor
to terminal
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.
3required.
Complies
European Union Restriction
LAMP
LAMP
Note: For two lamp application, cap any
blue lead.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
lamp
application,
cap
any
two
blue leads.
Note:
For cap
three
lamp
cap any unused blue lead.
For two lamp application,
two
blueapplication,
leads individually.
Insulate
to
600
volts.
For twocap
lamp
application,
For one lamp application,
two
blue leads,cap
onetwo
redblue
and leads individually.
For
one
lamp
application,
cap
two
QUICKTRONIC
3x32
one yellow lead individually. Insulate to 600 volts.blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Product Weight:
1.6 lbs each (approx)
LAMP
Blue
LAMP
White
Green
Black
Black
White
Red
Black
White
Red
LAMP
QUICKTRONIC FM
Note: For QT-FM green ground wire
Note: For QT-FM green ground wire to terminal required.
of Hazardous Substances Directive (Directive
EC 2002/95)
Blue
System Life / WarrantyBlack
Black Blue
Blue
White
BALLAST
Blue
White Blue
BALLAST
QUICKTRONIC products are covered by the Red
Black Blue
Blue
BALLAST
Blue
White
Black BALLAST Blue
Blue
Red
White
BALLAST
Red
Mounting
Length
Black
Red
White
Red
Blue
Blue
QUICK 60+ warranty,
BALLAST
Blue
a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
®
BALLAST
Length
OSRAM SYLVANIA
National Customer
Note: For
application,
any volts.
blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application,
cap one
any lamp
blue lead.
Insulatecap
to 600
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application,
cap any blueand
lead. Insulate
to 600Center
volts.
Service
Sales
2x40DL
QUICKTRONIC 1x40DL
QUICKTRONIC 2x40DL
QUICKTRONIC QUICKTRONIC
3x40DL
QUICKTRONIC 1x40DL
QUICKTRONIC
2x40DL
QUICKTRONIC
3x40DL
QUICKTRONIC
1x40DL
Item Number
49383 QHE 2 x 32T8 / UNV ISN - SC - 1 UL Type CC
1-800-LIGHTBULB
QUICKTRONIC High Efficiency
Case Size
(1-800-544-4828)
Black
Blue
Blue
Number of Lamps
Starting/Ballast Factor Blue
www.sylvania.com
Blue
White
Black
Black Blue
Width
Note: For QT-FM green ground wire to terminal required.
BALLAST
Blue
Black
Blue
BALLAST
White
Line
Voltage
(120-277V)
Black
Blue
White
Red
White
BALLAST
Red
Yellow
BALLAST
Yellow
Red
the system solution, See the World in a New Light, OCTRON, SUPERSAVER, XP and QUICK60+ are registered trademarks ofYellow
OSRAM SYLVANIAYellow
Inc.
Red
Primary Lamp Wattage
Blue
Blue
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.87
Circuit Type: Parallel
Lamp Frequency: >40kHz
Lamp CCF: Less than 1.7
Starting Temp: 2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V rated
Blue
Blue
Blue
line (108-305V)
Blue
Blue
1.07
1.07
1.14
1.23
1.36
©2011 OSRAM SYLVANIA
Blue
Blue
Blue
Specifications
BALLAST
UL
Listed Class P, Type 1 Outdoor
Blue
Black/White
Blue
BALLAST
White
UL Type CC Rated
BALLAST
Red
LAMP
LAMP
Red
CSA
Certified
LAMP
LAMP
LAMP
LAMP
LAMP
70°C
Max
Case
Temperature
LAMP
LAMP
FCCLAMP
47 CFR Part 18 Non-Consumer
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Class
A Sound Rating
Note: For two lamp application
For onecap
lamp
Note: For two lampNote:
application,
anyapplication,
blue lead. cap any blue lead.
Note: For one lamp application, cap any blue lead.
3
Note:
For
two
lamp
application,
cap
any
blue
lead.
Note:
For
one
lamp
application,
cap
any
blue
lead.
QUICKTRONIC 1x32 For one lamp application, cap any Insulate
For one lamp application, cap
600 volts.
Compliant
QUICKTRONIC 1x32
twoRoHS
bluetoleads.
Insulate to 600 volts.
QUICKTRONIC 1x32
For one
lamp
application, cap any two blue leads.
Insulate to 600 volts.
Insulate to 600
Insulate
to 600
volts.
QUICKTRONIC
2x32
ANSI
62.41
Cat.
A Transient Protection
QUICKTRONIC 2x32
Insulate
to 600
volts.
QUICKTRONIC 2x32
QUICKTRONI
QUICKTRONIC 3x32GFCI compatible
QUICKTRONIC 3x32
Emergency ballast compatible
Black
Blue
Black
Blue
Remote Mounting (Max wire length White
from
Black
Blue
White
Blue
White
Blue
White
White
White
Green
BALLAST
White
Blue
White
Green
BALLAST
Green
ballast case to lampholder):
BALLAST
Green
White
BALLAST
BALLAST
Black
Blue
BALLAST
Green
Black
Yellow BALLAST
Red
Black
BALLAST
Black
Yellow
Red
Green
Black
BALLAST
Black
Blue
Yellow
Red
Black
• 20 ft: full wattage T8s
BALLAST
White
Yellow
Red
Yellow
Red
Blue
Yellow
Red
Red
• 10 ft: energy saving T8s
LAMP
Blue • 4 ft: 25W energy
Blue saving T8s
LAMP
BlueLAMP
Black/White
White
ST
89/90
96/97
97/98
99/100
99/101
QHE Instant Start ballasts will also operate
F17, F25, F32 and the U-Bend equivalent
& energy saving T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Electronic Ballast Catalog.
8770 109/107 89/91 0.81
9815 109/107 96/98 0.81
9325
102
97 0.85
8915 95/94 100/101 0.93
8095 87/86 99/100 1.01
Banded Pack contains 10 pieces, (add “-B” to Description).
1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black
White
Red
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other manufacturers equivalent lamp types
that meet ANSI specifications.
BEF1
0.25/0.11FO32/7002800
0.25/0.11FO32/XP3000
0.23/0.09FO30/SS2850
0.21/0.09FO28/SS 2725
0.20/0.09FO25/SS2475
Banded Pack
MP
LAST
T8 Instant Start
Comments
MP
P
Type
QHE T8 ISN CC
LAST
Normal Ballast Factor
SPECIFICATION DATA
Black
BALLAST
White Blue
White
SYLVANIA,
QUICKTRONIC is a registered trademark of OSRAM GmbH.
LAMP
LAMP
Blue
BALLAST
Red
Blue
Red
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x59*
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
QUICKTRONIC 2x59*
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Blue
Blue
Red
Red
Note: For two lamp application, cap an
QUICKTRONIC
Black
White
Specifications subject to change
without
notice.
BALLAST
Yellow
Yellow
LAMP
LAMP
Blue
Blue
Red
Red