IP Enclosures is a premium brand of high quality wall mounted electrical enclosures and accessories.
An IP Enclosure is the enclosure of choice for those in mining, oil & gas, infrastructure, industrials, commercial, communications, defence, food and beverage industries.
The IP Enclosures range of electrical enclosures are rated IP55, IP65 and IP66.
Manufactured from powdercoated galvanised mild steel and grade 316 stainless steel, sizes range from 300H x
200W x 150D to 1200H x 1200W x 400D.
IP Enclosures is an Australian brand manufactured in Europe. Available nationally via Tro Pacific, on-line via www.electrical-enclosures.com.au and locally via a nationwide network of resellers, IP Enclosures are readily accessible with comprehensive sales and technical support.
Large quantities of all sizes are held in
Australia and are available for immediate dispatch via our integrated sales, inventory and logistics systems to ensure delivery of customer orders in full on time.
All IP Enclosures incorporate many advanced design features and each enclosure is consistently manufactured to precision in Europe to the highest of standards. For this reason, customers have adopted IP Enclosures as their standard enclosure system.
1
Raising The Standard
IP Enclosures is the enclosure of choice for customers because we raise the standard.
Standard features include:
- Monoblock fully welded body
- Materials: Grade 316 Stainless Steel; or
Galvanised Steel Powdercoated
- IP Rating up to IP66
- Reversible hinged door with 120° opening
- High quality concealed hinges
- 8mm square drive lock (up to 1000 wide)
- 3 Point locking system (over 1000 wide)
- Polyurethane seal
- Gland plate
- M6 Earth stud
- Mounting Pan/Plate (Gear Tray)
- Door C-Rails for cable management
- Holes with blind nutserts for mounting
brackets, mounting plate and rainhood
- Stainless steel locks, hinges and fasteners
on stainless steel enclosures ipenclosures.com.au

There are a number of factors to consider when selecting the correct enclosure to meet your needs. It is important to select the correct enclosure to optimise the life of the enclosure and internal components.
Size
The size of the enclosure is determined by the components and cables being housed including minimum distances between and around housed components and cables.
IP Enclosures range in size from 300H x
200W x 150D to 1200H x 1200W x 400D.
IP Rating
IP Ratings are defined in IEC60529
(AS60529) as a two digit code detailing the extent of resistance to solids and liquids.
The following table highlights the higher the number, the higher the resistance.
IP Enclosures range from IP55 to IP66.
Materials
Material is typically selected based on the application, environment and location.
IP Enclosures provide powdercoated galvanised steel for general applications and grade 316 stainless steel for high corrosion resistance.
Options
The application, environment, location, and installation may require certain options to be included as part of the enclosure.
IP Enclosure options include:
- Mounting Brackets
- Rain Hood
- Keyed Locks
- Inner Door/Escutcheon
2
IP--
1st NUMERAL
Protection against solids
2nd NUMERAL
Protection against liquids
1 Protected against dripping water
(condensation)
1 Protected against solid bodies greater than 50mm
(eg. involuntary hand contact)
2 Protected against solid bodies greater than 12mm
(eg. fingers)
2 Protected against falling water up to
15º from the vertical
3 Protected against solid bodies greater than
2.5mm
(eg. tools, cables)
4 Protected against solid bodies greater than 1mm
(eg. small tools)
3
4
Protected against rain water up to 60º from the vertical
Protected against water splashing in all directions
5 Protected against dust (no harmful deposits)
5 Protected against water jets from all directions
6 Fully protected against dust
6 Protected against wavelike water jets from all directions
7 Protected against immersion
8 Protected against the effects of prolonged immersion under water

The IP Enclosures range of wall mounted powdercoated galvanised steel enclosures is designed to house a variety of electrical switch and control equipment. It is suitable for internal and external electrical installations for infrastructure, industrials, commercial and communications applications. All IP Enclosures are built to precision in
Europe to ensure consistent high quality standards.
Features
Monoblock fully welded body
Reversible hinged door with 120° opening
High quality concealed hinges
Square drive lock (<1000 wide); 3-Point locking (>1000 wide)
Gland plate with gasket
M6 Earth stud
Mounting Pan/Plate (Gear Tray)
Door C-Rails for cable management
Blind nutserts for mounting brackets, mounting plate and rainhood
Benefits
Provides excellent protection of capital equipment
Good resistance to corrosion and chemical attack
Robust construction with high impact resistance
Easy access due to no centre mullion
Sloping hood option reduces debris build up
Nutserts eliminate drilling to retain IP rating integrity
Applications
Infrastructure
Industrial
Commercial
Communications
Technical Data
Standard: TS/EN/IEC TSEN60529 TSEN62208 TSEN6149
Protection degree: IP55 and IP65 (Refer to table)
Material: Galvanised Steel
Seal: Polyurethane
Thickness: Body up to 1.5mm; Doors 2.0mm
Finish: Powdercoated
Colour: RAL7035
3 ipenclosures.com.au

120° Door Opening
Square drive lock (<1000 wide);
3-Point locking (>1000 wide)
Keyed locks (optional)
Polyurethane full perimeter seal
Mounting pan/plate (gear tray)
Earth connection studs for earthing between body and door
Flanged gland plate with gasket
4
High quality concealed hinges
(Stainless steel on stainless steel enclosures)
Door C-Rails for cable management
Rainhood (optional)
Nutserts provided as standard to eliminate drilling to retain IP rating integrity ipenclosures.com.au

Ordering Information
Item No.
800x800x200
800x800x300
800x800x400
1000x600x250
1000x600x300
1000x800x300
1000x800x400
1000x1000x300
1000x1000x400
1200x600x300
1200x800x300
1200x800x400
1200x1000x300
1200x1000x400
1200x1200x300
1200x1200x400
Height (H) x Width (W) x
Depth (D)
300x200x150
300x300x150
300x300x200
400x300x150
400x300x200
400x400x200
500x300x150
500x300x200
500x400x200
500x400x250
500x500x200
500x500x250
600x400x200
600x400x250
600x600x200
600x600x300
700x500x200
700x500x250
800x600x200
800x600x250
800x600x300
IP-808020
IP-808030
IP-808040
IP-1006025
IP-1006030
IP-1008030
IP-1008040
IP-10010030
IP-10010040
IP-1206030
IP-1208030
IP-1208040
IP-12010030
IP-12010040
IP-12012030
IP-12012040
IP-302015
IP-303015
IP-303020
IP-403015
IP-403020
IP-404020
IP-503015
IP-503020
IP-504020
IP-504025
IP-505020
IP-505025
IP-604020
IP-604025
IP-606020
IP-606030
IP-705020
IP-705025
IP-806020
IP-806025
IP-806030
Thickness
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1
1
2
2
2
2
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
No. of doors
1
1
1
1
1
1
2
2
3
3
3
3
2
3
3
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
No. of locks
1
1
1
1
1
1
5 ipenclosures.com.au

Ordering Information - Accessories
Item No.
IP-KL
IP-WMB4
CG-V60
CG-V80
Description
Key locks
Wall Mount
Bracket Set
60mm Ventilator
80mm Ventilator
Key Locks IP-KL & IP-SSKL (Stainless Steel)
IP Enclosures are provided standard with square drive locks for enclosures less than 1000mm wide or a 3-Point locking system for enclosures greater than 1000mm wide. A keyed lock IP-KL can be provided as an option.
Key Lock Dust Cap IP-SSKLDC
Key lock dust caps can be provided as an option to prevent ingress of dust and particles.
Wall Mount Bracket Set IP-WMB4 & IP-SSMB
Galvanised mild steel and grade 316 stainless steel wall brackets can be provided as an option.
Each wall mount bracket set comes with four (4) wall brackets and fasteners. All IP Enclosures are provided with nutserts to accomodate wall mount brackets to eliminate drilling to retain IP rating integrity.
Ventilator CG-V60 & CG-V80
60mm and 80mm ventilators can be provided as an option. IP Enclosures can arrange water-cutting of holes and profiles to accomodate required fittings.
Customisation and Water-Cutting
IP Enclosures can also provide customisation including custom hole and profile cutting to suit customer needs.
IP Enclosures recommends water cutting.
6 ipenclosures.com.au

The IP Enclosures premium range of wall mounted grade
316 stainless steel enclosures is designed for extreme duty to house a variety of electrical switch and control equipment.
It is suitable for internal and external electrical installations for mining, oil & gas, infrastructure, industrials, commercial, communications, defence, food and beverage applications.
All IP Enclosures are built to precision in Europe to ensure consistent high quality standards.
Features
Monoblock fully welded body
Reversible hinged door with 120° opening
High quality concealed hinges
Square drive lock (<1000 wide); 3-Point locking (>1000 wide)
Gland plate with gasket
M6 Earth stud
Mounting Pan/Plate (Gear Tray)
Door C-Rails for cable management
Blind nutserts for mounting brackets, mounting plate and rainhood
Stainless steel locks, hinges and fasteners
Benefits
Provides extreme protection of capital equipment
Excellent resistance to corrosion and chemical attack
Robust construction with high impact resistance
Easy access due to no centre mullion
Sloping hood option reduces debris build up
Nutserts eliminate drilling to retain IP rating integrity
Applications
Oil & Gas
Infrastructure
Commercial Agriculture & Irrigation
Communications Food & Beverage
Technical Data
Standard: TS/EN/IEC TSEN60529 TSEN62208 TSEN6149
Protection degree: IP55 and IP66 (Refer to table)
Material: Grade 316 Stainless Steel
Seal: Polyurethane
Thickness: Body up to 1.5mm; Doors 2.0mm
7 ipenclosures.com.au

Polyurethane full perimeter seal
High quality concealed hinges
(Stainless steel on stainless steel enclosures)
Door C-Rails for cable management
Square drive lock (<1000 wide);
3-Point locking (>1000 wide)
Keyed locks (optional)
Mounting pan/plate (gear tray)
Earth connection studs for earthing between body and door
Flanged gland plate with gasket
Rainhood (optional)
Nutserts provided as standard to eliminate drilling to retain IP rating integrity
Looking After Your Stainless Steel
It is important to handle stainless steel carefully to prevent ferrous metal contamination.
Do not grind mild steel adjacent to stainless steel or rub mild steel over stainless steel as this will contaminate stainless steel which will result in rusting.
It is also important to treat (pickle/passivate) heat affected areas caused by drilling, cutting or welding processes. If pickle/passivate faciltiies are not available, water-cutting holes is recommended to ensure the integrity of stainless steel is maintained. Our representatives can assist with water-cutting if required.
Order Info - Accessories
Item No.
IP-SSMB
IP-SSKL
IP-SSKLDC
Description
316 Stainless Steel Mounting Bracket
316 Stainless Steel Key Lock
316 Stainless Steel Key Lock Dust Cap
8 ipenclosures.com.au

IP-SS302015
IP-SS303015
IP-SS403015
IP-SS403020
IP-SS404020
IP-SS504020
IP-SS504025
IP-SS505025
IP-SS604020
IP-SS604025
IP-SS606030
IP-SS705025
IP-SS806025
IP-SS806030
IP-SS808030
IP-SS1006030
IP-SS1008030
IP-SS1008040
IP-SS10010030
IP-SS10010040
IP-SS1208030
IP-SS12010030
IP-SS12010040
IP-SS12012030
IP-SS12012040
Ordering Information - Enclosures
Item No.
Height x Width x Depth
(mm)
300 x 200 x 150
300 x 300 x 150
400 x 300 x 150
400 x 300 x 200
400 x 400 x 200
500 x 400 x 200
500 x 400 x 250
500 x 500 x 250
600 x 400 x 200
600 x 400 x 250
600 x 600 x 300
700 x 500 x 250
800 x 600 x 250
800 x 600 x 300
800 x 800 x 300
1000 x 600 x 300
1000 x 800 x 300
1000 x 800 x 400
1000 x 1000 x 300
1000 x 1000 x 400
1200 x 800 x 300
1200 x 1000 x 300
1200 x 1000 x 400
1200 x 1200 x 300
1200 x 1200 x 400
Mounting Plate
No. of Locks
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
1 quarter turn
2 quarter turn
2 quarter turn
2 quarter turn
2 quarter turn
2 quarter turn
2 quarter turn
2 quarter turn
3 point handle
3 point handle
2 quarter turn
3 point handle
3 point handle
3 point handle
3 point handle
Doors Weight (kg)
Height x Width x Thick-
(mm)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
1
1
1
16.15
23.15
21.60
28.00
29.7
37.00
35.90
10.65
12.90
13.85
16.45
14.90
4.80
6.25
7.85
8.75
62.34
71.90
70.41
81.80
44.90
50.25
55.22
61.70
52.72
950 x 930 x 2.0
1150 x 730 x 2.0
1150 x 930 x 2.0
1150 x 1130 x 2.0
250 x 230 x 1.5
350 x 230 x 1.5
350 x 230 x 1.5
350 x 330 x 1.5
450 x 330 x 1.5
450 x 330 x 1.5
450 x 430 x 1.5
550 x 330 x 1.5
550 x 330 x 1.5
550 x 530 x 1.5
650 x 430 x 1.5
750 x 530 x 1.5
750 x 530 x 1.5
750 x 730 x 1.5
950 x 530 x 1.5
950 x 730 x 1.5
9 ipenclosures.com.au

IP-
IP-
IP-
IP-
IP-
IP-
IP-
316 S/S Inner Door Set
Item No.
SSID3030
SSID4030
SSID4040
SSID5040
SSID5050
SSID6040
SSID6060
IPSSID7050
IPSSID8060
IP-
IP-
IP-
IP-
IP-
IP-
SSID8080
SSID10060
SSID10080
SSID100100
SSID12080
SSID120100
Height (H) x
Width (W)
300 x 300
400 x 300
400 x 400
500 x 400
500 x 500
600 x 400
600 x 600
700 x 500
800 x 600
800 x 800
1000 x 600
1000 x 800
IP-
IP-
PSID8080
PSID10060
IPPSID10080
IPPSID100100
1000 x 1000
1200 x 800
1200 x 1000
IPPSID12080
IPPSID120100
Powder Coated Steel Inner Door Set
IP-
Item No.
IPPSID3030
IPPSID4030
IP-
IP-
IP-
IP-
IP-
IP-
IP-
PSID3020
PSID4040
PSID5040
PSID5050
PSID6040
PSID6060
PSID7050
PSID8060
Rain Hoods
Height (H) x Width
(W)
300 x 200
300 x 300
400 x 300
400 x 400
500 x 400
500 x 500
600 x 400
600 x 600
700 x 500
800 x 600
800 x 800
1000 x 600
Item No.
IPSSRH3015
IPSSRH3015
IPSSRH3020
IPSSRH4020
IPSSRH4020
IPSSRH4025
IPSSRH5025
IPSSRH4020
IPSSRH4025
IPSSRH6030
IPSSRH5025
IPSSRH6025
IPSSRH6030
IPSSRH8030
IPSSRH6030
IPSSRH8030
1000 x 800
1000 x 1000 IPSSRH10030
Width x Depth (mm)
1000 x 300
400 x 200
400 x 250
600 x 300
500 x 250
600 x 250
600 x 300
800 x 300
600 x 300
800 x 300
300 x 150
300 x 150
300 x 200
400 x 200
400 x 200
400 x 250
500 x 250
1200 x 800
1200 x 1000
IP-
IP-
SSRH8030
SSRH10030
800 x 300
1000 x 300
IPSSID120120 1200 x 1200 IPPSID120120 1200 x 1200 IPSSRH12030 1200 x 300
10 ipenclosures.com.au

Tro Pacific Holdings Pty Ltd
Trading as Tro Pacific
ABN 94 168 980 854
Brisbane | Sydney | Adelaide | Perth
Head Office: 8 Conara Rd KUNDA PARK QLD 4556
T: + 61 7 5450 1476 | F: + 61 7 5453 4054
Phone: 1300 TRO PAC (876 722) sales@tro-pacific.com
© IP Enclosures 2015 ipenclosures.com.au