®
Patent Pending
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
Features:

A cost-effective, edge-based & seamless solution for inserting locally generated content (eg. security cameras or localized
advertising) in MDUs that are being served with a PON with 1550nm overlay or RFoG network

Locally encodes up to 10 SD (or 5 HD) programs in MPEG-2/H.264 (see specifications for details), multiplexes into a QAM carrier
& transmits optically for insertion into optical network that services the MDU

User defined insertion wavelength ensures no optical interference with 1550nm broadcast video wavelength

User settable QAM frequency ensures that inserted QAM does not interfere with any of the 1550nm broadcast video QAMs

Fully integrated audio/video encoders, multiplexer, QAM modulator, optical transmitters & 1 or 4-port EDFA modules

Scalable wall mount solution: from 1-10 encoded programs & 1-10, 12, 13 or 16 optical output options

Hot-swappable encoder cards, optical transmitters & 1 or 4-port EDFA modules

“No-video” screen in case of loss of input video; user can create custom on-screen text/design

HTTP-based GUI allows for easy set-up & control; “one-click” configuration download & upload allows for efficient bulk configuration
management (MPEG/QAM)

Local front panel access to EDFA settings
DVISf (open view)
DVISf (closed view)
Application Diagram
MDU
ONT /
ONU
nm
1550
ITU
ONT /
ONU
nm
1550
ITU
RFoG / PON WITH 1550 OVERLAY
1550nm
FIBER
DISTRIBUTION
HUB
ONT /
ONU
nm
1550
ITU
ITU
OPTICAL OUT #1
DVISf
LOCAL A/V
OPTICAL OUT #16
Page 1 of 7
Specifications subject to change without notice.
®
Patent Pending
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
DVISf Specifications
BASE PLATFORM SPECIFICATIONS
CHASSIS OVERVIEW
DIMENSIONS
WEIGHT (Max)
ENCODED PROGRAMS
POWER SUPPLY
POWER CONSUMPTION
DEVICE MANAGEMENT
OPERATING TEMPERATURE
HUMIDITY
TS MULTIPLEXER
PACKET SIZE
TS SUPPORT
PROGRAM NUMBER & TS NUMBER
PSI / SI / PSIP INFORMATION TABLE
SETTABLE PIDs
QAM MODULATOR / RF UPCONVERTER
QAM MODULATION
MODULATION FORMAT
RF QAM OUTPUT POWER AT RF OUT (Max)
ATTENUATOR
ATTENUATOR STEP
RF QAM FREQUENCY OUTPUT RANGE(1)
SUPPORTED CHANNEL PLANS
FREQUENCY STEP
RF QAM CHANNEL BANDWIDTH
EXCESS BANDWIDTH
SYMBOL RATE
MER EQUALIZED(2)
FREQUENCY OFFSET
SYMBOL RATE OFFSET
CARRIER SUPPRESSION
SIGNAL/NOISE
SPURIOUS
TS PROCESSING
FEC
RF INTERFACES
RF OUT
RF INPUT (On Transmitter Module)
15.75”H x 17.05”W x 12.0”D (40.0H x 43.3W x 30.5D cm), Wall Mount, Lockable Front Door
55.7 lbs (25.3 kg)
Up to 10 into one QAM Channel, Scalable (plug-in cards with 1 or 2 encoders per card)
IEC Connector / 90-264 VAC, 50/60 Hz
165W
HTTP / SNMP Network Interface (RJ45)
0⁰C to +50⁰C (+32⁰F to +122⁰F)
0-95% (without condensation)
188 Bytes
QBA, AF
User Settable (Program #: 1-65535; TS ID: 1-65535)
PAT, PMT, SDT, NIT, MGT, CVCT
PMT, PCR (0x0015-0x1FFE; dec. 21-8190)
ITU-T J.83 Annex A/Annex B/Annex C
16, 32, 64, 128, 256 QAM
57.5 +/- 1.5 dBmV
0-26 dB
1.0 dB
45-870 MHz(1)
STANDARD, HRC, IRC
250 kHz
6 MHz (Annex B)
Max. 8 MHz (Annex A/C)
Annex B: 12% (256 QAM), 18% (64 QAM)
Annex A: 15%
Annex C: 13%
Annex B: Automatically Set with Selected Modulation Format
5.360537 MSymb/s - 256 QAM
5.056941 MSymb/s - 64 QAM
Annex A/C: max. 7 MSymb/s
> 40 dB(2)
< 2ppm
< +/- 50 Hz
> 55 dB
> 45 dB
-60 dB
Null Packet Insertion & PCR Correction
ITU-T J.83 Annex B; DVB-C EN300429 & ITU-T J.83 Annex A/C
F, 75 Ω, Jumpered to Optical Transmitter Module
F, 75 Ω
OPTICAL OUTPUT
TRANSMITTER MODULES
4-PORT
(4 Outputs for use with EDFA Modules)
1-PORT
(High Output Transmitter. Not for use if EDFA Modules
are required)
1 F Input, 4 SC/APC Outputs
2.5 dBm per Output, Wavelength ITU DWDM C-band 22 to 46 (user specified)(3)
For more details, see DVFTX Specifications
1 F Input, 1 SC/APC Output
Output Power 12 dBm +/- 1 dB (fixed), Wavelength ITU DWDM C-band 22 to 46 (user specified)(3)
For more details, see DVFTX-12 Specifications
EDFA MODULES
4-PORT
1-PORT
1 SC/APC Input, 1 SC/APC Test Output (-24 dB tap port), 4 SC/APC Output Ports,
Output Power: 10-19 dBm (user adjustable)
DVISf base platform can accept up to four 4-port EDFA modules
For more details, see DVF4E Specifications
1 SC/APC Input, 1 SC/APC Test Output (-30 dB tap port), 1 SC/APC Output Port,
Output Power: 10-19 dBm (user adjustable)
DVISf base platform can accept up to four 1-port EDFA modules
For more details, see DVF1E Specifications
NOTES:
(1) Extended Tune Range 15-975 MHz. Contact ATX for details.
(2) Measured with Rohde & Schwarz EFA (FW Ver 05.33).
(3) See Ordering Information.
Page 2 of 7
Specifications subject to change without notice.
®
Patent Pending
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
DVISf Specifications (cont’d)
HD/SD ENCODER CARD SPECIFICATIONS
DV1HDA
VIDEO INPUTS
COMPONENT
CONNECTOR
CHROMA FORMAT
3x RCA Female
YPbPr 4:2:2
480p_60 (59.94)
576p_50
720p_60 (59.94)
RESOLUTIONS
720p_50
1080i_60 (59.94)
1080i_50
PC - VGA
CONNECTOR
CHROMA FORMAT
DE-15 Female, 15-Pin, 3 Rows
RGB 4:4:4
640 x 480, 60 Hz
800 x 600, 60 Hz
1280 x 720, 60 Hz
1024 x 768, 60 Hz
1280 x 1024, 60 Hz
1366 x 768, 60 Hz
1400 x 1050, 60 Hz
1920 x 1080, 60 Hz
RESOLUTIONS
AUDIO INPUTS
ANALOG L/R
CONNECTOR
DIGITAL SPDI/F
CONNECTOR
AUDIO STANDARD
MAX CHANNELS
VIDEO PROCESSING
ENCODING
ENCODE LEVEL
CHROMA
BIT RATE
COMPONENT VIDEO RESOLUTIONS
DV1HDA
TRS 3.5 mm Female, 2x RCA Adapter Female
1x RCA (Coaxial) Female
IEC 61937:AC3 (Pass Through)
6 (5.1) Pass Through
MPEG-2
H.264
MPEG-2 HD MP @ HL
4:2:0
1-25 Mbps
High Profile Level 5
4:2:0
1-25 Mbps
480p_60 (59.94)
576p_50
720p_60 (59.94)
720p_50
1080i_60 (59.94)
1080i_50
640 x 480, 60 Hz
800 x 600, 60 Hz
VGA RESOLUTIONS
VIDEO PID SETTING
VBI PROCESSING
AUDIO PROCESSING
AUDIO ENCODER
ENCODE STANDARD
SAMPLE RATE
BIT RATE
AUDIO PID SETTING
DIGITAL AUDIO PASS THROUGH
AC-3 (2.0/5.1) PASS THROUGH
PHYSICAL
DIMENSIONS
WEIGHT
1280 x 720, 60 Hz
1024 x 768, 60 Hz
1280 x 1024, 60 Hz
1366 x 768, 60 Hz
1400 x 1050, 60 Hz
1920 x 1080, 60 Hz
Yes (0x0015-0x1FFE; dec. 21-8190)
Closed Captions
Dolby® Digital AC-3 ATSC A/52 (2.0)
48 kHz
192, 256, 384 kbps
Yes (0x0015-0x1FFE; dec. 21-8190)
Yes (S/PDIF)
6.5”H x 0.75”W x 3.0”D (16.5H x 1.9W x 7.6D cm)
0.33 lbs (0.15 kg)
NOTE:
Dolby is a registered trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories.
Page 3 of 7
Specifications subject to change without notice.
®
Patent Pending
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
DVISf Specifications (cont’d)
SD ENCODER CARD SPECIFICATIONS
DV1CE / DV1CEM
DV2CE / DV2CEM
VIDEO
INPUT
CVBS, NTSC / PAL(1)
1x BNC, 75 Ω
2x BNC, 75 Ω
MPEG-2, 4:2:0, MP@ML
INPUT INTERFACE
ENCODING FORMAT
ENCODING BIT RATE TYPE
CBR
VIDEO ADJUSTMENTS
VIDEO PROCESSING
Brightness, Contrast, Saturation
TBC
HORIZONTAL
RESOLUTION
VERTICAL
720, 704, 544, 528, 480, 352
480, 576
FRAME RATE
VIDEO ENCODING BIT RATE
29.97fps, 25fps(1)
1-8 Mbps
GOP STRUCTURE
VIDEO PID SETTING
VBI PROCESSING
AUDIO
INPUT
INPUT INTERFACE
ENCODING FORMAT
MODES
SAMPLING RATE
ENCODING BIT RATES
AUDIO PID SETTING
IBBP - Length 15
Yes (0x0015-0x1FFE; dec. 21-8190)
Closed Captions
Analog, Unbalanced
2x RCA (pair L/R)
4x RCA (2x pair L/R)
Dolby Digital AC-3, MPEG-1 Layer II(1)
DV1CE / DV1CEM
DV2CE / DV2CEM
Stereo, Mono
48 kHz
192, 256, 384 kbps
Yes (0x0015-0x1FFE; dec. 21-8190)
PHYSICAL
DIMENSIONS
WEIGHT
6.5”H x 0.75”W x 3.0”D (16.5H x 1.9W x 7.6D cm)
0.33 lbs (0.15 kg)
NOTES:
(1) DV1CE & DV2CE provide NTSC/Dolby Digital AC-3 encoding (29.97fps); DV1CEM & DV2CEM provide
PAL/MPEG-1 Layer II encoding (25fps).
Dolby is a registered trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories.
GIGABIT ETHERNET CARD SPECIFICATIONS
PHYSICAL
COPPER PORTS
SFP PORTS
POWER CONSUMPTION (w/ 4 Active Ports)
DIMENSIONS
WEIGHT
BIT RATES & STANDARDS
RJ45 PORTS
SFP PORTS
IP OUTPUT CHARACTERISTICS
TRANSPORT LAYER
STREAMING PROTOCOL
NETWORK
ENCAPSULATION
TRANSMISSION
NULL STUFFING
DVGIGE
2x RJ45
2x SFP Cage
~ 4W
6.5”H x 0.75”W x 3.0”D (16.5H x 1.9W x 7.6D cm)
0.33 lbs (0.15 kg)
10/100/1000BASE-T & 10/100/1000BASE-TX
1000BASE-LX
UDP, RTP
Multicast, Unicast
DHCP, VLAN Tagging (IEEE 802.1Q)
1-7 TS Packets per Ethernet Frame
SPTS, MPTS
OFF, ON (User Settable Limit)
DVGIGE
Page 4 of 7
Specifications subject to change without notice.
®
Patent Pending
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
Transmitter Module Specifications
TRANSMITTER MODULE
SPECIFICATIONS
DVFTX
DVFTX12
INPUT
CONNECTOR
LEVEL
RETURN LOSS
F, 75 Ω
36 dBmV (Single QAM Carrier at 50-870 MHz)
18 dB (min)
OUTPUT
CONNECTOR
LEVEL
SC/APC, 4 Ports
2.5 +/- 1.0 dBm per Port
RETURN LOSS
WAVELENGTH
SBS SUPRESSION
SC/APC, 1 Port
12 +/- 1.0 dBm per Port
40 dB (min)
User Specified: ITU ch 22 to 46*
Up to 20 dBm
MONITOR
STATUS
AGC
POWER
PHYSICAL
DIMENSIONS
WEIGHT
Front LED
Front LED
7.5W (max)
6.2”H x 1.0”W x 7.0”D (15.75H x 2.54W x 17.78D cm)
2.0 lbs (0.9 kg)
DVFTX
NOTE:
* See Ordering Information.
EDFA Module Specifications
EDFA MODULE SPECIFICATIONS
DVF4E (4-Port)
DVF1E (1-Port)
INPUT
CONNECTOR
SC/APC
2.5 to 7 dBm
LEVEL
RETURN LOSS
40 dB (min)
WAVELENGTH
1540-1560nm
6 dB (max)
NOISE FIGURE
OUTPUT
CONNECTOR
LEVEL
RETURN LOSS
SC/APC, 4 Ports
SC/APC, 1 Port
10-19 dBm, User Adjusted via Front Panel, All Ports Simultaneous
40 dB (min)
TAP (TEST)
CONNECTOR
LEVEL
SC/APC
-24 dB Relative to Output Ports
-30 dB Relative to Output Port
MONITOR & CONTROL
OPTICAL ATTENUATOR
ALARM
POWER
Front Panel Rotary Switch
Front LED
19W (max)
DVF4E
DVF1E
PHYSICAL
DIMENSIONS
WEIGHT
6.2”H x 1.0”W x 7.0”D (15.75H x 2.54W x 17.78D cm)
2.0 lbs (0.9 kg)
Page 5 of 7
Specifications subject to change without notice.
®
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
Functional Schematic
PLUG-IN ENCODER
CARDS
VIDEO IN
L/R AUDIO IN
VIDEO IN
L/R AUDIO IN
ENCODER CARDS
1 OR 2-CHANNEL
ENCODER
SLOT 1
TS MULTIPLEXER
VIDEO IN
L/R AUDIO IN
VIDEO IN
L/R AUDIO IN
ON/OFF
90-264 VAC
QAM MODULATOR
RF-UPCONVERTER
OPTICAL OUT #1
OPTICAL OUT #2
OPTICAL OUT #3
OPTICAL OUT #4
TEST POINT
4 PORT EDFA
MODULE
#4
OPTICAL OUT #1
OPTICAL OUT #2
OPTICAL OUT #3
OPTICAL OUT #4
TEST POINT
OPTICAL
TRANSMITTER
MODULE
1 OR 2-CHANNEL
ENCODER
SLOT 5
4 PORT EDFA
MODULE
#1
FAN
#1
MONITOR & CONTROL
POWER
SUPPLY
FAN
#4
I.T.E.
E325862
40RH
RESET REBOOT
RJ-45
INTERFACE
INPUT
INPUT
VOLTAGE CURRENT
120 VAC
1.8A
230 VAC
0.9A
FREQ
50/60Hz
DVISf
Page 6 of 7
Specifications subject to change without notice.
®
Patent Pending
Fiber Optic Digital Video Insertion System for PON with
1550 Overlay & RFoG Networks (DVISf):
Ordering Help Information
Part Number
Optical
Outputs
Tx Module
1 Port
EDFA
4 Port
EDFA
EDFA
Modules
Max Number
of ONTs
















1
2
3
512
1024
1536
1
2
3
4
2
2048
2560
3072
3584
4096
DVF*E1O^
DVF*E2O^
DVF*E3O^
1
2
3
DVF*E4O^
DVF*E5O^
DVF*E6O^
DVF*E7O^
DVF*E8O^
4
5
6
7
8








DVF*E9O^
DVF*E10O^
DVF*E12O^
9
10
12









3
4
3
4608
5120
6144
DVF*E13O^
DVF*E16O^
13
16






4
4
6656
8192
NOTES:
* = Number of Encoders (1,2…10)
^ = Wavelength (ITU 22,23…46)
Ordering Information
Part Number
Description
DVF*ExO^
Optical A/V Insertion Unit with * MPEG-2 SD A/V Baseband Inputs ( * = Number of Inputs, ie. 1, 2, …10) , x Optical Outputs
(x = 1-10, 12, 13 or 16) and ^ Wavelength (^ = ITU 22, 23….46 ), includes 19”/23” Universal Mounting Brackets (1 & 2 Output
Versions use DVF1E EDFA Module(s)), NTSC/AC-3 Dolby.
DVF*ExO^M
Optical A/V Insertion Unit with * MPEG-2 SD A/V Baseband Inputs ( * = Number of Inputs, ie. 1, 2, …10) , x Optical Outputs
(x = 1-10, 12, 13 or 16) and ^ Wavelength (^ = ITU 22, 23….46 ), includes 19”/23” Universal Mounting Brackets (1 & 2 Output
Versions use DVF1E EDFA Module(s)), PAL/MPEG-1 Layer II.
DVFBASE
DV1CE
DVISf Base Unit/chassis (no plug-in cards/modules installed).
Separate 1-channel MPEG-2 SD Encoder Plug-in Card (1 Video + 2 Audio Inputs), NTSC/AC-3 Dolby.
DV1CEM
DV2CE
Separate 1-channel MPEG-2 SD Encoder Plug-in Card (1 Video + 2 Audio Inputs), PAL/MPEG-1 Layer II.
Separate 2-channel MPEG-2 SD Encoder Plug-in Card (2 Video + 4 Audio Inputs), NTSC/AC-3 Dolby.
DV2CEM
DV1HDA
Separate 2-channel MPEG-2 SD Encoder Plug-in Card (2 Video + 4 Audio Inputs), PAL/MPEG-1 Layer II.
Separate 1-channel MPEG-2/H.264 SD/HD Encoder Plug-in Card (Component/VGA).
DVGIGE
Separate Gigabit Ethernet Output Plug-in Card SFP/RJ45.
DVFTX^
Optical Transmitter Module for DVISf Base Unit, four 2.5 dBm Output Ports, ^ ITU Wavelength (^ = 22,23…46), SC/APC
Connectors.
DVFTX12^
Optical Transmitter Module for DVISf Base Unit, one 12 dBm Output Port, ^ ITU Wavelength (^ = 22,23…46), SC/APC
Connector.
DVF1E
DVF4E
DVFAN
DVFPWRSUP
1-port EDFA Module with -30 dB Tap Port, SC/APC Connectors; 10 to 19 dBm.
4-port EDFA Module with -24 dB Tap Port, SC/APC Connectors; 10 to 19 dBm.
Replacement/spare Fan for DVISf.
Replacement/spare Power Supply for DVISf.
NOTE:
Dolby is a registered trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories.
MDU Solutions® is a registered trademark of ATX in the United States and/or other countries. Products or features contained herein may be covered by one or more U.S. or foreign patents. Dolby® and
other non-ATX product and company names mentioned in this data sheet are the property of their respective companies.
ISO
9001
Specifications subject to change without notice.
REGISTERED
Tel (905) 428-6068
Printed in Canada
1-501 Clements Road West, Ajax, ON L1S 7H4 Canada
Toll Free (800) 565-7488 Fax (905) 427-1964 Toll Free Fax (866) 427-1964
www.atxnetworks.com support@atxnetworks.com
Page 7 of 7
Rev. 06/16 (ANW0899)