RG12S-E
Series
High Capacity
Combo Unit
Up to 360 watts of
Remote Capacity
The RG12S-E series combines an efficient exit sign with a high
capacity battery unit. This simplifies typical installations and helps save
on wires runs. Energize either many remote fixtures off of one “combo”
or, a few high power fixtures mounted directly on the unit.
Features
High quality steel enclosure with corrosion resistant undercoating
Fully C860 approved “Exit” legend illuminated with ALINGAP LEDs
Available in 12 volts, 110, 144, 250 and 360 watts
Standard 120/347Vac input
Optional Auto-test charger (available with 110 watts only)
Long life, maintenance free lead acid battery
Sealed dust-proof transfer relay
Solid state pulse type charger standard
RG12S-E Series
Project/Location:
Typical Specification
Date:
Contractor:
Prepared by:
Supply and install a unit that combines an illuminated LED exit sign with an emergency light battery unit. The housing and
faceplate shall be constructed of steel. The faceplate shall come standard with knock out chevrons. The light source for the
exit sign shall be LED. The LED lamps shall provide illumination in normal and emergency operation. Red LEDs shall be of
ALINGAP* technology. The charger board, the battery and the LEDs shall be contained in a single housing. A diffuser
optimized for LEDs shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with even illumination.
The unit shall include a test switch and high charge pilot light. The equipment shall be designed to furnish exit illumination
from the normal AC source. When a power failure occurs, the exit sign along with the emergency heads shall illuminate for
a minimum of 30 minutes. The power available for emergency lights shall be at least 110 watts or as otherwise specified.
The heads shall require no tools to aim and shall be as specified. The exit sign shall be CSA-C860 and NRCAN/C860-01
approved.
The equipment shall be Lumacell Model – RG12S_______E______________________.
*ALINGAP (AlInGaP): Aluminum, Indium, Gallium and Phosphorus. ALINGAP LED offers a higher light efficacy, with the Lumen/Watt ratio 300% to 500% higher than the traditional GaAs LED.
AlInGaP Exit signs are designed for 10 years+ of CSA/UL photometric compliance. AlInGaP LEDs show an annual light loss rate 10 times lowers than the average light loss of standard GaAs LEDs.
Dimensions
16 1/8”
[41.0cm]
13 7/8”
[35.3cm]
10 1/4”
[26.0cm]
16 1/8”
[41.0cm]
5 7/16”
[13.8cm]
5 7/16”
[13.8cm]
CABINET B
(110W and 144W)
23 1/8”
[58.8cm]
Series
Lettering # of Heads
E= EXIT
5 7/16”
[13.8cm]
5 7/16”
[13.8cm]
CABINET C
(250W and 360W)
Ordering Information
RG12S110= 12V-110watts
RG12S144= 12V-144watts
RG12S250= 12V-250watts
RG12S360= 12V-360watts
16 3/16”
[41.1cm]
13 7/8”
[35.3cm]
10 1/4”
[26.1cm]
Blank= no heads
1= one head
2= two heads
3= three heads
Head Style and Wattage
Colour*
Voltage
Blank= factory white Blank= 120/347VAC
MT9W= mini tungsten, 12V - 9watt, wedge base
B= Black
ZC= 277VAC
MT18W= mini tungsten, 12V - 18watt, wedge base
MQ8W= mini halogen, 12V - 8watt, quartz bi-pin
MQ12W= mini halogen,12V -12watt, quartz bi-pin
MM12W= mini halogen,12V - 12watt, MR16
MM20W= mini halogen, 12V - 20watt, MR16
LH9W= large tungsten ,12V - 9watt, wedge base
LH18W= large tungsten, 12V - 18watt, wedge base
LH25W= large tungsten,12V - 25watt, DCB
LQ8W= large halogen, 12V - 8watt, quartz bi-pin
LQ12W= large halogen,12V - 12watt, quartz bi-pin
LQ20W= large halogen, 12V - 20watt, quartz bi-pin
LQ55W= large halogen,12V - 55watt, quartz bi-pin
SB12W= large tungsten,12V - 9watt, sealed beam
SB18W= large tungsten,12V - 18watt, sealed beam
SB25W= large tungsten, 12V - 25watt, sealed beam
SQ8W= large halogen,12V - 8watt, quartz sealed beam
SQ12W= large halogen,12V - 12watt, quartz sealed beam
D12W= Deco head DR130, 12V - 12watt, MR16
* Other colours
D20W= Deco head DR130, 12V - 20watt, MR16
available. Please
D35W= Deco head DR130, 12V - 35watt, MR16
contact factory.
D50W= Deco head DR130, 12V - 50watt, MR16
Options
AT= autotest
(110w only)
EXAMPLE: RG12S110E2MT9WBZCAT
© Thomas & Betts Limited. All rights reserved.
www.lumacell.com
Printed in Canada. 08/07/4000. Order no. LU/RG12SE-E