Loop Belt Industries design engineers have considerable experience with conveyor system design. Equipment is built in Illinois and can be shipped to any part of the world.
Boom structure and feed conveyor are stronger and lighter weight than aluminum.
Highly efficient dual telescopic driver system provides smooth conveyor extension and retraction. Drives are mounted for ease of maintenance and serviceability.
Outriggers are quick and easy to set up with full stability under most conditions.
Equipment cleans easily using a standard low pressure system or an optional jet washer. A water tank is built into the main structure.
(630) 552-5303 www.loopbeltind.com
21W171 Hill Avenue • Glen Ellyn, Illinois 60137
JPG
*Specifications subject to change without notice. Copyright ® 2015 Loop Belt Industries, Inc.
09-10-2015
LB-33T4 GENERAL SPECIFICATIONS
LB33T4-20

WIND ENERGY
DAMS
STONE
W
ALLS
MA
T POURS
FOOTINGS
SAND SLABS
 Proudly designed and built in America, the Loop Belt LB33T4-20 truck-mounted telescopic conveyor utilizes the same proven structural design and performance features as its LB40 big-brother.
 Loop Belt places a wide range of materials for all types of jobs from footings/ foundations, mat pours, bridge decks, dams and wind energy tower foundations.
 Boom and feeder functions are fully proportional using Hawe valves and a Scanreco wireless remote system. Each machine comes with two remotes – a single joystick and a double joystick both with hard wire capability. Both main and feeder belts are fully proportional on both remotes.
 Equipped with 20” wide conveyor belts that provide up to 40% more material delivery capacity than 18” belts.
 All the transition points were designed to run clean and transfer smoothly. The feeder and boom are equipped with U-rollers to keep the material on the belt and the machine running clean.
 The LB33T4-20 outriggers are fully proportional and quick and easy to set up. No manual maneuvering required. Machine stability is of utmost safety concern.
 Easy to clean using its standard low pressure system or an optional jet washer. 200 gallon water tank is built into the main structure.
 Can place stone, then concrete on the same job; the machine sets up and moves very fast saving time and labor.
 The LB33T4-20 has 360º rotation letting you place material in any position as well as load the feeder in a variety of locations.
 The standard LB33T4-20 is mounted on a Mack MRU 613 with a MP7 405 HP Engine using
Mack PTO’s, a standard in the truck mounted conveyor industry. However, the LB33T4-20 can be mounted on a variety of chassis based on your company’s needs.
 High-Strength tubular steel welded boom structure and feed conveyor are stronger and lighter weight than aluminum.
 Horsepower requirements are very low at full capacity; therefore, the LB33T4-20 can be operated at low RPM’s for great fuel savings.
 Feed conveyor transfer and turret mountings are designed for optimal performance, ease of maintenance and clean operation.
 The LB33T4-20 has a set-up height of 17 feet which is great for jobs with low overhead clearance.
 Highly efficient dual telescopic wire rope driver system provides smooth conveyor extension and retraction. Drives are mounted for ease of maintenance and serviceability.