The perfect way to open and close the refrigerator door:
K hinges from Hettich
K hinges – great in the cold
Hettich is re-defining the perfect kitchen: Convenience
every step of the way from kitchen furniture to fitted appliance. High-quality K hinges for integratable refrigerators
and freezers open and close refrigerator and freezer doors
with a feel of unsurpassed luxury. The K
­ 99 hinge closes
laden doors weighing up to 45 kg, the K02 doors weighing
up to 60 kg, the K08 hinge doors weighing up to
70 kg. The K05 hinge can carry loads of 100 kg and is particularly suitable for very large, fully integratable refrigerators and freezers. An integrated spring system makes sure
doors reliably stay closed and tightly sealed.
2
K hinges open doors to a generous angle of 115°. This provides convenient access and a better view of contents. Also
highly practical is the controlled door-opening system that
prevents the door from springing open and colliding with
adjacent furniture elements. It allows the door to be stopped in different opening positions.
Intelligent solution:
More space in the refrigerator and freezer
As the use of K hinges makes additional furniture hinges
unnecessary, better use can be made of space. This can give
as much as 12 litres more refrigerating or freezing capacity.
New star in the refrigerator
The star among refrigerator hinges is the K08 hinge. The
hinge with integrated soft-closing function shuts refrigerator
doors reliably, gently and quietly. The wide closing angle and
the specially developed soft-closing system make shutting
the door particularly convenient. A nudge is all it takes for
the door to close all by itself. Perfectly balanced closing
action keeps everything in its place in the refrigerator door,
making clinking bottles and loudly banging doors a thing of
the past.
3
Using K hinges
Example applications
Installing a sliding decor door and a fixed door
Example applications
Selecting the right hinge for
your needs depends on the
size, width and weight of the
refrigerator door. This produces the following example
applications.
Ideally, door height should be
greater than door width.
1720
1720
K99
K02
1250
door
width
Türbreite
K08
K08
1250
≤ 45kg
≤ 60kg
≤ 50kg
≤ 70kg
≤ 600
≤ 600
≤ 600
≤ 600
1720
K05 - S
K05 - L
K05 - X
≤ 92kg
≤ 75kg
≤ 110kg
≤ 900
≤ 600
≤ 900
1200
door width
Türbreite
Installation
Whereas installing a sliding decor door in front of
the actual refrigerator door
requires additional furniture
hinges, all that is needed to
mount a fixed door are the
K hinges from Hettich. They
cannot be used for installing
a sliding decor door. Mounting a door requires the use of
one hinge A and one hinge B.
Refrigerator door and furniture
door are firmly joined together
using a 3D installation system.
600
600
A
furniture
Möbelhinges
scharniere
Installing a sliding
decor door
set of
Garnitur
K hinges
K-Scharniere
Installing a
fixed door
B
4
www.hettich.com
Installing a fixed door
Changing the door mounting side
3-D installation system
Changing the door mounting side
600
The hinges can be transposed for
right or left opening without any
major effort. Simply change the
hinges over diagonally. That’s all
there is to it!
A
B
set
of
Garnitur
KK-Scharniere
hinges
B
A
3-D installation system
The 3-D installation system joins
the refrigerator or freezer to the
furniture front. Letting you adjust
the door in three directions, it
comes in set form. Detailed installation instructions will be provided
on request.
4,5
The diagram on the right shows
the ideal installation situation for
using the 3-D installation system.
600
4,5
19
4,5
596
Opening angle stop
An opening limiter pin can be used
for all K hinges ­if the angle of 115°
cannot be achieved because of
adjacent furniture elements. With
the pin fitted, the hinge only opens
to 90°. The opening limiter pin is
installed from above.
Technik für Möbel
5
K99 and K02 hinges
Diagrams
Installation diagrams
The diagrams show the K99
hinge fitted. The hinge is fitted
in two stages.
1. Connect the hinge’s door
bearing to the appliance door.
2. Engage the hinge in the
refrigerator carcase at keyholes.
These steps can be performed
very easily and quickly.
A cover cap can be fitted to
conceal the visible screws.
Door bearing on appliance door
Refrigerator carcase and hinge are connected at keyholes that can be concealed with a cover cap.
Installed dimensions / differentiator
K99 and K02 hinges have
identical dimensions. The hole
marked in the diagram is provided to tell the two hinges
apart. The hole in the K02
hinges distinguishes it from the
K99 hinge.
96
(45)
41,5
25

Note
The loading capacity and life of the hinges is largely determined by the rigidity and stability of the refrigerator cabinet and its door.
6
www.hettich.com
K99 and K02 hinges
Connecting hinge to refrigerator door
Different refrigerator door types make it necessary to use hinges of the
appropriate design. Generally speaking, a distinction is drawn between
installed depths of 41.5 mm and 45 mm. Some refrigerator doors are
made entirely of metal sheet. Some refrigerator doors also have a top
and bottom plastic cap. In this case the door bearing must extend over
the plastic cap as far as the metal door so that it can be screwed down.
This results in different hinge configurations.
Appliance door with folded metal edge, installed depth 41.5 mm
43
43,5
12,8
Appliance door with folded metal edge, installed depth 45 mm
41,5
19
44
1
25
25
25
45
42,5
11,8
1
25
4,5
4,5
3 (16)
38
38
M5 M5
cheese
head 2) 2)
Zylinderkopf
36,5
M5 counterM5
Senkkopf
sunk
head 1)1)
On door door
Appliance
withwith
caps,
plastic
installed
cap, installed
depthdepth
41.541.5 mm
43
43,5
Appliance door with plastic cap, installed depth 45 mm
41,5
19
44
1
10,7
40
42,5
9,7
25
1
25
4,5
37
45
4,5
37
3 (16)
35
35
M5
M5
cheese
head 2) 2)
Zylinderkopf
35,7
M5 counterM5
Senkkopf
sunk
head 1)1)
39,2
On dooradapter
Distance
with caps, installed depth 41.5
A distance adapter is used on a 16 mm carcase side. This increases carcase thickness to
19 mm as required for installation.
3 16
distance
adapter
Distanzadapter
)Head shape to DIN 965
)Head shape to DIN 7984
1
2
Technik für Möbel
7
K99 and K02 hinges
Installation
Optimum installation on refrigerators and freezers
Built-in refrigerator / freezer
43
41,5
43,5
12,8
1
A
25
25
B
4,5
8
36,5
38
A sturdy design of
appliance and door
will ensure long hinge
life.
M5 counterM5
Senkkopf
sunk
head 1)1)
4,5
4,5
19
The following dimensions are ideal for
achieving a maximum
opening angle of 115°.
(45)
41,5
(44)
40,5
4
1
22
115°
1
2
)Head shape to DIN 965
8
www.hettich.com
K99 and K02 hinges
Installation
On
Optimum
door with
installation
caps, installed
on built-under
depth 41.5
refrigerators
Without furniture surround
43
41,5
62,5
12,8
1
A
25
25
B
4,5
8
36,5
38
A sturdy design of
appliance and door
will ensure long hinge
life.
M5 counterM5
Senkkopf
sunk
head 1) 1)
4,5
19
The following dimensions are ideal for
achieving a maximum
opening angle of 115°.
(45)
41,5
(44)
40,5
4
1
22
115°
2
)Head shape to DIN 965
1
Technik für Möbel
9
K99 and K02 hinges
Technical specifications
Technical specifications
Function
Value
Material / finish
Steel, galvanised
Load per door
Temperature range
Corrosion test
K99: 45 kg up to 100,000 cycles at a hinge distance of 1240 mm,
in line with UL 250 up to 300,000 cycles
K02: 60 kg up to 100,000 cycles at a hinge distance of 1720 mm,
in line with UL 250 up to 300,000 cycles
Application temperature: 5°C to 40°C
Transportation: -25°C to 70°C/72 h
Corrosion-proof to DIN 50017 KFW
(alternating condensation water climate) 500 hours without red rust
Corrosion-proof to DIN EN ISO 9227 NSS
(neutral salt spray test) 72 hours without red rust
RoHS
compliant
Lubrication
H1 approved lubricant
10
www.hettich.com
K99 and K02 hinges
Component summary
Accessories
Door with folded metal edge
Please order one hinge A and one hinge B per door.
Type
Description
Drawing no.
Order no.
PU
Use on built-in refrigerator / freezer
K99–A–BTA41.5-K5/5.1-115°/Z *)
BA 02171
9 009 866
50
Use on built-in refrigerator / freezer
K99–B–BTA41.5-K5/5.1-115°/Z *)
BA 02172
9 009 867
50
Use on built-under refrigerator
K99–A–BTS41.5-K5/5.1-115°/Z *)
BA 02175
9 042 920
50
Use on built-under refrigerator
K99–B–BTS41.5-K5/5.1-115°/Z *)
BA 02176
9 042 921
50
Description
Drawing no.
Order no.
PU
Use on built-in refrigerator / freezer
K99–A–BTA41.5-K5.8/5.2-115°/Z *)
BA 02165
1 084 589
50
Use on built-in refrigerator / freezer
K99–B–BTA41.5-K5.8/5.2-115°/Z *)
BA 02166
1 084 590
50
Use on built-in refrigerator / freezer
K02–A–BTA41.5-K5.8/5.2-115°/Z *)
BA 02200
9 045 054
50
Use on built-in refrigerator / freezer
K02–B–BTA41.5-K5.8/5.2-115°/Z *)
BA 02201
9 045 055
50
Description
Drawing no.
Order no.
PU
Opening limiter pin, 90°, galvanised
BN 03723
9 005 658
1000
Side panel adapter, 3mm, for 16mm side
panel
BN 03759
9 008 286
1500
Cover cap, white
BN 04450
9 046 451
1000
Door with plastic cap
Please order one hinge A and one hinge B per door.
Type
Accessories
*)Hinges are supplied closed
Technik für Möbel
11
K08 hinge
Diagrams
Integrated Silent System
Unlike the K99 and K02
hinges, the K08 hinge has an
integrated Silent System system
for perfect refrigerator door
closing action with a feel of
luxury.
The integrated spring system
always keeps the refrigerator
closed and tightly sealed. The
integrated damper absorbs the
force of the spring, providing a
beautifully gentle closing cycle.
Installation diagrams
The diagrams show the K08
hinge fitted.
The hinge is fitted in two
stages.
1. Connect the hinge’s door
bearing to the appliance door.
2. Engage the hinge in the
refrigerator carcase at keyholes.
These steps can be performed
very easily and quickly.
Door bearing screwed to appliance door
Refrigerator carcase and hinge are connected at keyholes that can be concealed with a cover cap.
Installed dimensions
97
41,5
28,5

Note
The loading capacity and life of the hinges is largely determined by the rigidity and stability of the refrigerator cabinet and its door.
12
www.hettich.com
K08 hinge
Connecting hinge to refrigerator door
Unlike the K99 and K02 hinges, the K08 hinge is only designed for an
installed depth of 41.5 mm. In this case too, different refrigerator door
types necessitate two different hinge­configurations. Some refrigerator
doors are made entirely of metal sheet. Refrigerator doors also exist that
have a top and bottom plastic cap. In this case the door bearing must
extend over the plastic cap as far as the metal door so that it can be
screwed down. This produces different door bearing lengths.
Appliance door with folded metal edge, 41.5 mm
43
41,5
43,5
12,8
M5 counterM5
Senkkopf
sunk
head 1)1)
Appliance door with plastic cap, 41.5 mm
43
1
41,5
43,5
10,7
1
M5 counterM5
Senkkopf
sunk
head 1)1)
28,3
28,3
25
4,5
4,5
37
6,3
38
18,4
36,5
35
35,7
)Head shape to DIN 965
1
Technik für Möbel
13
K08 hinge
Installation
Technical specifications
Optimum installation on refrigerators and freezers
43
Built-in refrigerator / freezer
43,5
12,8
41,5
1
A
28,3
25
4,5
6,3
B
A sturdy design of
appliance and door
will ensure long hinge
life.
Using these dimensions also makes the
hinge very easy to
exchange with K99
or K02.
The following dimensions are ideal for
achieving a maximum
opening angle of 115°.
38
M5 counterM5
sunk
head 1) 1)
Senkkopf
4,5
4,5
19
41,5
40,5
4
1
22
115°
1
2
)Head shape to DIN 965
Technical specifications
Function
Value
Material / finish
Steel, galvanised
Load per door
70 kg up to 130,000 cycles, in line with UL 250 up to 300,000 cycles
Temperature range
Application temperature: 5°C to 40°C
Transportation: -25°C to 70°C/72 h
Corrosion test
Corrosion-proof to DIN 50017 KFW
(alternating condensation water climate) 500 hours without red rust
Corrosion-proof to DIN EN ISO 9227 NSS
(neutral salt spray test) 96 hours without red rust
RoHS
compliant
Lubrication
H1 approved lubricant
14
www.hettich.com
K08 hinge
Component summary
Accessories
Door with folded metal edge
Please order one hinge A and one hinge B per door.
Type
Order no.
PU
Use on built-in refrigerator / freezer
BA 02322
K08 – Type A – BTA41.5-K5/5.1-H25-115°/Z *)
9 131 658
50
Use on built-in refrigerator / freezer
BA 02323
K08 – Type B – BTA41.5-K5/5.1-H25-115°/Z *)
9 131 659
50
Use on built-under refrigerator
BA 02320
K08 – Type A – BTS41.5-K5/5.1-H25-115°/Z *)
9 131 075
50
Use on built-under refrigerator
BA 02321
K08 – Type B – BTS41.5-K5/5.1-H25-115°/Z *)
9 131 076
50
Description
Drawing no.
Door with plastic cap
Please order one hinge A and one hinge B per door.
Type
Description
Drawing no.
Order no.
PU
Use on built-in refrigerator / freezer
K08 – Type A – BTA41.5-K5.8/ 5.2-115°
BA 02316
9 130 953
50
Use on built-in refrigerator / freezer
K08 – Type B – BTA41.5-K5.8/ 5.2-115°
BA 02317
9 130 954
50
K08 – Type A – BTS41.5-K5.8/5.2-115°/Z *)
BA 02318
9 131 111
50
K08 – Type B – BTS41.5-K5.8/5.2-115°/Z *)
BA 02319
9 131 112
50
Description
Drawing no.
Order no.
PU
Opening limiter pin, 90°, galvanised
BN 10488
9 098 734
1000
Cover cap, white
BN 10681
9 096 440
1000
Accessories
*)Hinges are supplied closed
Technik für Möbel
15
K99, K02 and K08 hinges
 Installation note
Attaching furniture front
The 3-D installation system joins the refrigerator or freezer to
the furniture front. It lets you adjust the door in three directions and is available in set form. Detailed installation instructions will be provided on request. Only involving a few screws,
installation is simple and fast.
The diagram on the right shows the ideal installation dimensions for using the 3-D installation system.
4,5
±6
±5
±3
600
4,5
19
4,5
596
On door with caps, installed depth 41.5
19
(45)
41,5
(44)
40,5
4
1
22
115°
16
2
www.hettich.com
K05 hinge
Diagrams
 Product features
Installation diagrams / advice
The diagrams show the K05
hinge fitted. The hinge is fitted
in two stages.
1. Screw hinge to appliance
door.
2. Block hinge using installation tool, now engage and
screw to appliance at keyholes
using the principle of positive
locking.
Connecting hinge to appliance door
Connecting hinge to refrigerator carcase at keyholes
using principle of positive locking
The hinge can be blocked using the installation tool
An opening limiter pin is fitted if the angle of 115°
cannot be achieved because of adjacent furniture
elements. The hinge then only opens as far as 90°
Product features
Closing assistance
The hinges leave the factory
with closing assistance deactivated. Closing assistance should
only be activated once the
hinge has been installed. This is
done by moving the screw from
position 0 to 1.

Note
The loading capacity and life of the hinges is largely determined by the rigidity and stability of the refrigerator cabinet and its door.
Technik für Möbel
17
K05 hinge
Connecting hinge to refrigerator door
What makes the K05 hinge so special is the fact that it lets the appliance door open to a particularly wide angle. This makes it possible to
pull out refrigerator and freezer compartments all the way as they are
not obstructed by the door.
The K05 hinge is also designed for American installation situations such
as face frame. The hinge’s wide opening angle prevents any collision
with adjacent furniture elements. However, installation at a wall requires
a wider vertical frame.
Optimum installation
Senkung fürfor
M6M6
Schrauben
countersink
screws
Kopfform
965shape
DIN 965DIN
head
30
21
30
Gewinde
M6
M6 thread
35
75
Positionierhilfe
positioning aiddurch
withNocken
cams
200
20,5
20,5
35
positive
Formschluß
engagement
zum Gerät with
device
92,5
Appliance door opening
86
50
200
20,5
12
35
92,5
120
4
3
115°
18
www.hettich.com
K05 hinge
Technical specifications
Component summary
Technical specifications
Function
Value
Profile material / finish
Steel, galvanised
K05-L: 75 kg up to 200,000 cycles at a hinge distance of 1720 mm,
in line with UL 250 up to 300,000 cycles
K05-S: 92 kg up to 200,000 cycles at a hinge distance of 1200 mm,
in line with UL 250 up to 300,000 cycles
Load per door
K05-X: 110 kg up to 200,000 cycles at a hinge distance of 1720 mm,
in line with UL 250 up to 300,000 cycles
Temperature range
Application temperature: 5°C to 40°C
Transportation: -25°C to 70°C/72 h
Corrosion test
Corrosion-proof to DIN 50017 KFW (alternating condensation water climate) 500 hours;
corrosion-proof to DIN EN ISO 9227 NSS (neutral salt spray test) 500 hours
RoHS
compliant
Component summary
Please order one hinge A and one hinge B per door.
Description
Drawing no.
Order no.
PU
Use on built-in refrigerator / freezer
K05-A–BT92.5SYM.M6-115°“L“/WS
BA 02006 *)
9 046 685
12
Use on built-in refrigerator / freezer
K05-B–BT92.5SYM.M6-115°“L“/WS
BA 02007 *)
9 046 686
12
Use on built-in refrigerator / freezer
K05-A–BT92.5SYM.M6-115°“S“/WS
BA 02004 *)
9 040 819
12
Use on built-in refrigerator / freezer
K05-B–BT92.5SYM.M6-115°“S“/WS
BA 02005 *)
9 040 820
12
Use on built-in refrigerator / freezer
K05-A–BT92.5SYM.M6-115°“X“/WS
BA 02008 *)
9 082 127
12
Use on built-in refrigerator / freezer
K05-B–BT92.5SYM.M6-115°“X“/WS
BA 02009 *)
9 082 128
12
Description
Drawing no.
Order no.
PU
Opening limiter pin, 90°, Niro
BN 10187
9 046 938
500
Adapter bracket for door connection
BN 10172
9 056 750
96
Accessories
*)Hinges are supplied closed and leave the factory with closing assistance deactivated
Technik für Möbel
19
1206-044_K-hinges_0913_HMV/en
www.hettich.com