JP Adjustable Support Columns
Adjustable Support Columns may be used to support carport roofs and beams
carrying loads not more than two wood frame floors, where the length of joists
carried by such beams does not exceed 16’ and a live load on any floor does not
exceed 50 lbs/ft2.
Materials: 3 gauge steel plates (3 1/2˝ x 6˝);
12 gauge outer tube (2 3/4˝ O.D);
11 gauge inner tube (2 1/2˝ O.D.)
Finish: RSC Grey Primer Paint
Codes: Conform to NBC 2010, Article 9.17.3.4.(1)
and to CAN/CGSB-7.2-94.
Installation:
• Elevate top tubing to approximate height and insert locking pin. Rotate jack screw
to desired height, then fasten top plate in position. Ensure top and bottom plates are
properly fastened to supported beam members and properly aligned to the
supporting base footing. Always ensure product is installed 90º to beam and footing.
• Fasten the supported beam to the top plate with (2) 1/4" x 2" lag screws.
JP
USP
Stock No. Ref. No.
JP24
-- -JP36
-- -JP60
-- -JP96
-- -JP108
-- --
Allowable Load1,3
Adjustable Height
in
mm
17 - 24 432 - 610
24 - 36 610 - 914
36 - 60 914 - 1524
60 - 96 1524 - 2438
72 - 108 1829 - 2743
Lbs
8555
8555
8555
8555
8177
kN
38.06
38.06
38.06
38.06
36.37
Factored Resistance2,3
Lbs
12320
12320
12320
12320
11775
kN
54.80
54.80
54.80
54.80
52.38
1) Allowable loads were established in accordance with CAN/CGSB-7.2-94.
2) The factored resistances given above were soft converted by multiplying the allowable
loads by 1.44.
3) The bearing resistance of the supported beam should be checked by the building designer
using the appropriate CSA standard.
Replacement Parts for
Adjustable Support Columns
USP
Stock No.
JPCP
JPSN
JPSP
JPSSN
JPTP
Feb. 1, 2016
Description
Setting Pin
Screw & Nut Assembly
6" x 7" Steel Plate
Screw & Nut Assembly
Top Plate
JPCP
Qty/
Package
1
1
15
1
1
JPSN
Typical JP
installation
JPSP
JPSSN
JPTP
Use in conjunction with USP’s current Canadian Product Catalogue for detailed information.
USP supplies quality products
to build Stronger Safer Structures
USPconnectors.com
Valid through Dec. 31, 2017
USP2312
Revised February 2016
JP Adjustable Support Columns
Feb. 1, 2016
Adjustable Support Columns may be used to support carport roofs and beams
carrying loads not more than two wood frame floors, where the length of joists
carried by such beams does not exceed 16’ and a live load on any floor does not
exceed 50 lbs/ft2.
Materials: 3 gauge steel plates (3 1/2˝ x 6˝);
12 gauge outer tube (2 3/4˝ O.D);
11 gauge inner tube (2 1/2˝ O.D.)
Finish: RSC Grey Primer Paint
Codes: Conform to NBC 2010, Article 9.17.3.4.(1)
and to CAN/CGSB-7.2-94.
Installation:
• Elevate top tubing to approximate height and insert locking pin. Rotate jack screw
to desired height, then fasten top plate in position. Ensure top and bottom plates are
properly fastened to supported beam members and properly aligned to the
supporting base footing. Always ensure product is installed 90º to beam and footing.
• Fasten the supported beam to the top plate with (2) 1/4" x 2" lag screws.
JP
Feb. 1, 2016
USP
Stock No. Ref. No.
JP24
-- -JP36
-- -JP60
-- -JP96
-- -JP108
-- --
Allowable Load1,3
Adjustable Height
in
mm
17 - 24 432 - 610
24 - 36 610 - 914
36 - 60 914 - 1524
60 - 96 1524 - 2438
72 - 108 1829 - 2743
Lbs
8555
8555
8555
8555
8177
kN
38.06
38.06
38.06
38.06
36.37
Factored Resistance2,3
Lbs
12320
12320
12320
12320
11775
kN
54.80
54.80
54.80
54.80
52.38
1) Allowable loads were established in accordance with CAN/CGSB-7.2-94.
2) The factored resistances given above were soft converted by multiplying the allowable
loads by 1.44.
3) The bearing resistance of the supported beam should be checked by the building designer
using the appropriate CSA standard.
Replacement Parts for
Adjustable Support Columns
Feb. 1, 2016
USP
Stock No.
JPCP
JPSN
JPSP
JPSSN
JPTP
Description
Setting Pin
Screw & Nut Assembly
6" x 7" Steel Plate
Screw & Nut Assembly
Top Plate
Qty/
Package
1
1
15
1
1
Typical JP
installation
Feb. 1, 2016
JPCP
JPSN
JPSP
JPSSN
JPTP
Use in conjunction with USP’s current Canadian Product Catalogue for detailed information.
USP supplies quality products
to build Stronger Safer Structures
USPconnectors.com
Valid through Dec. 31, 2017
USP2312
Revised February 2016
JP Adjustable Support Columns
Feb. 9, 2016
Feb. 9, 2016
Adjustable Support Columns may be used to support carport roofs and beams
carrying loads not more than two wood frame floors, where the length of joists
carried by such beams does not exceed 16’ and a live load on any floor does not
exceed 50 lbs/ft2.
Materials: 3 gauge steel plates (3 1/2˝ x 6˝);
12 gauge outer tube (2 3/4˝ O.D);
11 gauge inner tube (2 1/2˝ O.D.)
Finish: RSC Grey Primer Paint
Codes: Conform to NBC 2010, Article 9.17.3.4.(1)
and to CAN/CGSB-7.2-94.
Installation:
• Elevate top tubing to approximate height and insert locking pin. Rotate jack screw
to desired height, then fasten top plate in position. Ensure top and bottom plates are
properly fastened to supported beam members and properly aligned to the
supporting base footing. Always ensure product is installed 90º to beam and footing.
• Fasten the supported beam to the top plate with (2) 1/4" x 2" lag screws.
JP
USP
Stock No. Ref. No.
JP24
-- -JP36
-- -JP60
-- -JP96
-- -JP108
-- --
Allowable Load1,3
Adjustable Height
in
mm
17 - 24 432 - 610
24 - 36 610 - 914
36 - 60 914 - 1524
60 - 96 1524 - 2438
72 - 108 1829 - 2743
Lbs
8555
8555
8555
8555
8177
kN
38.06
38.06
38.06
38.06
36.37
Factored Resistance2,3
Lbs
12320
12320
12320
12320
11775
kN
54.80
54.80
54.80
54.80
52.38
1) Allowable loads were established in accordance with CAN/CGSB-7.2-94.
2) The factored resistances given above were soft converted by multiplying the allowable
loads by 1.44.
3) The bearing resistance of the supported beam should be checked by the building designer
using the appropriate CSA standard.
Feb. 9, 2016
Replacement Parts for
Adjustable Support Columns
USP
Stock No.
JPCP
JPSN
JPSP
JPSSN
JPTP
Description
Setting Pin
Screw & Nut Assembly
6" x 7" Steel Plate
Screw & Nut Assembly
Top Plate
Qty/
Package
1
1
15
1
1
Typical JP
installation
Feb. 9, 2016
JPCP
JPSN
JPSP
JPSSN
JPTP
Use in conjunction with USP’s current Canadian Product Catalogue for detailed information.
USP supplies quality products
to build Stronger Safer Structures
USPconnectors.com
Valid through Dec. 31, 2017
USP2312
Revised February 2016