s ALL-IN-ONE DESIGN Retractable with 7.5-ft. (2.3 m) working capacity and anchorage connector s MEETS ANSI Z359.1 The only tie-back retractable on the market that meets the Standard ble a t c a r t nly re o d n a First -back e i t o t d eline e f i n l g i e s h e t d ng o l a e r e anywh s Cost-effective alternative to tie-back shock-absorbing lanyards. s All-in-one, self-retracting lifeline/anchorage connector design reduces equipment required on the job site. s Designed for anchoring below a user’s harness back D-ring for greater safety. s Integrated shock absorber especially designed for tie-back applications with load indicator device. s Meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.1 requirement that states only 24-inches (.61 m) or less of lifeline extends out of the housing when the unit is fully retracted. k Tie-Bac Safely! s 7.5 ft. (2.3 m) Working Capacity – Heavy-duty web lifeline smoothly extends/retracts without interruption for greater mobility and convenience s s Tie-back ANYWHERE on the Lifeline – Provides more tie-off anchorage locations with a greater variety of beam-size options – Simplifies user training for improved safety s s Miller 5K ® Locking Snap Hook Designed Specifically for Tie-Back Use – 5,000 lbs. (22 kN) gate load capacity from any angle s s XTREME Performance Webbing s – Regular snap hooks easily fail if load forces are concentrated on the face or side of a hook – NOT with the Miller 5K Snap Hook – Engineered with high-tech strength and abrasion-resistant webbing. Available exclusively with Miller® brand products. – White side stripe stitching indicates that it is specially-designed for tie-back use e-Off i T % 0 For 10 ection t o r P l l Fa User-rated for 400-lbs. (181.4 kg) capacity MILLER TWIN TURBO T-BAK M FALL PROTECTION SYSTEM MFLTB-1/7.5FT The new patent-pending Miller Twin Turbo D-Ring Connector easily adapts two (2) Miller Turbo T-BAK Personal Fall Limiters for continuous 100% tie-off fall protection. TM TM Miller Turbo T-BAK Tie-Back Personal Fall Limiters TM Dimensions Unit Connector Description SKU 2.67-in. 3.57-in. (67.82 mm) (90.68 mm) Weight Q MILLER TURBO T-BAK TIE-BACK PERSONAL FALL LIMITERS MFLT-1/7.5FT MFLT-2/7.5FT MFLT-3/7.5FT MFLT-4/7.5FT MFLT-5/7.5FT Turbo T-BAK without unit connector Turbo T-BAK with a 17D-1 steel twist-lock carabiner Turbo T-BAK with a 17D-2 lightweight, aluminum twist-lock carabiner Turbo T-BAK with a locking snap hook with 3/4-in. (19 mm) gate opening Turbo T-BAK with an ANSI Z359-compliant snap hook with 3/4-in. (19 mm) gate opening 2.6 lbs. (1.18 kg) 3.2 lbs. (1.45 kg) 4.68-in. (118.9 mm) 2.8 lbs. (1.27 kg) 3.2 lbs. (1.45 kg) 3.3 lbs. (1.50 kg) Retracted 28.18-in. Q MILLER TWIN TURBO T-BAK D-RING CONNECTOR SYSTEM Twin Turbo D-ring Connector MFLTB-1/7.5FT 6.1 lbs. (2.77 kg) with two (2) MFLT-1/7.5FT Turbo T-BAK units (715.8 mm) Specifications Q MATERIALS Housing: Hub: Braking Mechanism: Webbing: Snap Hook: High-impact nylon Shock-absorbing engineered co-polymer Stainless steel 1-in. wide x .075-in. thick (25.4 mm x 1.9 mm) Zinc-plated steel Miller 5K® snap hook 5,000-lb. (22 kN) gate strength 3/4-in. (19 mm) gate opening Q TECHNICAL Maximum Working Load: Working Capacity: Maximum Arresting Force: 400 lbs. (181.4 kg) 7.5 ft. (2.3 m) <900 lb./f (4 kN) for up to 310 lbs. (140.6 kg) working load <1800 lb./f (8 kN) for up to 400 lbs. (181.4 kg) working load Unit Connectors Without Unit Connector Steel Twist-Lock Carabiner 1-in. (25.4 mm) Gate Opening Aluminum Twist-Lock Carabiner 1-in. (25.4 mm) Gate Opening Locking Snap Hook 3/4-in. (19.1 mm) Gate Opening ANSI Z359 Locking Snap Hook 3/4-in. (19.1 mm) Gate Opening Lead them to safety - build an enduring Culture of Safety where employees make safe choices on their own. www.honeywellsafety.com/culture © 2013 Honeywell International Inc. All rights reserved. W GET CONNECTED: Ask the Expert ... Ask Miller. 800/873-5242 www.millerfallprotection.com LMTTB/0113