Tous les candidats doivent être légalement autorisés à travailler au Canada. Au cours du processus d’embauche,
les candidats retenus seront appelés à compléter une évaluation de sécurité en vertu du règlement des
Marchandises Contrôlées du gouvernement du Canada et présenter des copies de pièces d’identité valides et en
règles.
Pour en apprendre davantage sur le règlement des Marchandises Contrôlées :
http://ssi-iss.tpsgc-pwgsc.gc.ca/dmc-cgd/index-fra.html
*************************************************************************************************
****
Successful applicants must be legally entitled to work in Canada. During the hiring process, every retained
candidate will be required to complete a security clearance in compliance with the Controlled Goods Directorate
from the government of Canada and present valid and up-to-date copies of pieces of identification.
To learn more about the Controlled Goods Program :
http://ssi-iss.tpsgc-pwgsc.gc.ca/dmc-cgd/index-eng.ht
NOTICE - EXPORT CONTROL COMPLIANCE
This document contains no technical data
Project Title:
Validation of Assembly Instruction Sheet in accordance to the Overhaul Manual
Objective:
Review and validate the accuracy of the Assembly Instructions Sheets in accordance to the Overhaul Manual and
Shop practices.
Description:
The following tasks are to be performed:
- Compare the Assembly Instructions Sheets with the overhaul manual
- Discuss with engineering to evaluate which option is the most appropriate for plant 5
- Align plant 5 best practices to the Assembly Instructions Sheets
- Create change requests to the overhaul manual when they are affected
- Keep tracker up-to-date and perform the flowdown to the plant 5 on the progress of theire requests
Please note that if you are selected for an interview, you will be notified on May 27th. All interviews will
be held Friday, June 3rd in Pratt & Whitney facilities in Longueuil. Thank you to ensure you are available
on June 3rd in the morning before applying for this project.
Deliverables:
Maintain, update the assembly instructions sheets to the latest up to date instructions. Create change
requests to the overhaul manuals.
Benefit:
Support the ANDON team in achieving the 1 day response back to the shop when problems occur.
Flowdown to the shop on the project progress.
Schedule:
Starting Date: 22 August 2016
Number Hours:
500 hours with potential extention of 100 hours
Ending Date:
23 December 2016
Full-Time
Software:
CATIA/Tech Illustrator
Word
Excel
Notepad/html
Pre-requisite:
Undergraduate Student in Mechanical Engineering.
Student will learn about the several different types of engine models, and how to navigate in overhaul manuals and
build relation with plant 5 employees.
Internal use ID : 1624
Page 1 of 2
Contact Name:
Johnny Cozzi
Location:
Saint-Hubert
Internal use ID : 1624
Page 2 of 2