LKA Audio Multipin
Based
on the MIL-C-5015 and VG
95234 standards, LKA connectors
maintain the basic principle of strength
and reliability of the military connectors.
The restyling and construction of this
range have been specifically studied to
meet the needs of the entertainment
industry. LKA configurations and their
wiring standards, well established in the
market, allow easy connection in all Live
and PA Rental business applications.
LKA are available in male and female
configurations in both cable and panel
versions. The standard version features
easy-grip long metal locking ring with
internal roller coupling studs. The special
retention of the protection dust cap was
planned for military and railway
applications. A full range of options
featuring slim locking rings for easy
coupling, long rubber locking rings, PCB
versions, silver (from 13 to 85 pins) or
gold (entire range) contacts, male and
female connector dust caps, to satisfy the
most demanding requirements. Also
available on request a 19 pin
configuration currently used for signal
distribution by leading loudspeaker
manufacturers as L-Acoustics.
For
any
different
configuration
requirement do not hesistate to contact us
for a custom solution.
Roller Studs
LK Series Standard cable connectors feature easy-grip long and slim metal locking rings, aluminium
backshells and skin tops with anti-bending spring (from 13 to 54 pin versions) or standard skin tops (from
85 to 200 pin versions). The studs are roller version to ensure easier coupling and a larger number
of operations due to a lower wear and tear of coupling ramps.
13 to 200 pins (4 to 66 channels)
Easy and error-free mating
Audible snap in quick bayonet lock
Excellent resistance against unlocking
Guaranteed for over 2000 coupling operations
Waterproof up to 10 m (33 ft) for 12 hours
Reverse series
Locking ring on male connectors.
Available on request in all configurations.
Skin top cable clamp
Highly resistant black finishing
Roller studs for easier coupling
High resistance to shock and vibrations
LKP Series Rubber locking rings are available for
inline connectors in all configurations.
STANDARD WIRING
Panel
male
2
Line female
Link www.linkitaly.com
Line male
Line female
Line male
Panel
female
LKA Series Connector
(Pins are to be ordered separately)
Cable mounting
Panel mounting
Cable mounting with rubber
locking ring
Pins
Male
Male
Female
Male
LK
LK
LK
LK
LK
LK
LK
13
25
37
54
85
150
200
13 MV
25 MV
37 MV
54 MV
85 MV
150 MV
200 MV
poles
poles
poles
poles
poles
poles
poles
Female
LK
LK
LK
LK
LK
LK
LK
LK
LK
LK
LK
LK
LK
LK
13 MP
25 MP
37 MP
54 MP
85 MP
150 MP
200 MP
13
25
37
54
85
150
200
poles
poles
poles
poles
poles
poles
poles
Female
13
25
37
54
85
150
200
13 FV
25 FV
37 FV
54 FV
85 FV
150 FV
200 FV
poles
poles
poles
poles
poles
poles
poles
LK
LK
LK
LK
LK
LK
LK
13 FP
25 FP
37 FP
54 FP
85 FP
150 FP
200 FP
* poles
* poles
LKP * FV
LKP * FV **
*= from 13 to 200 poles
**
B
R
G
Y
Blue
Red
Green
Yellow
LK
LK
LK
LK
poles
poles
poles
poles
poles
poles
poles
Gold for LK13-25-37-54-85
Silver for LK13-25-37-54-85
R
Gold for LK 150
RR
Gold for LK 200
Items subject to Minimum Order Qty
Female
LKA Connectors for PCB
13
25
37
54
85
150
200
PMD
PMA
PMD
PMD
LKI
LKI
LKI
LKI
LKI
LKI
25 FPS
25 MPS
37 MPS
54 MPS
85 MPS
150 MPS
25
25
37
54
85
150
poles
poles
poles
poles
poles
poles
LK
LK
LK
LK
PFD
PFA
PFD
PFD
T Gold for LK13-25-37-54-85
T Silver for LK13-25-37-54-85
RT
Gold for LK 150
RR
Gold for LK 200
T= Tulipan version
Accessories
Dust cap
Dust cap
Rubber locking ring
For connectors without locking ring
LK 20 TPM
For LK 13
LK 24 TPM
For LK 25
LK 28 TPM
For LK 37
LK 32 TPM
For LK 54
LK 40 TPM
For LK 85-150-200
For connectors with locking ring
LK 20 TPF
For LK 13
LK 24 TPF
For LK 25
LK 28 TPF
For LK 37
LK 32 TPF
For LK 54
LK 40 TPF
For LK 85-150-200
LK
LK
LK
LK
LK
*
20
24
28
32
40
For LK 13
For LK 25
For LK 37
For LK 54
For LK 85-150-200
RL*
RL*
RL*
RL*
RL*
B
R
G
Y
Blue
Red
Green
Yellow
Items subjected to Minimum Order Qty
male pin
female pin
57
44,5
50,8
39,7
44,5
34,9
41
31,8
38
29,4
57
44,5
50,8
39,7
44,5
34,9
41
31,8
38
29,4
6 ch
8 ch
12 ch
16 ch
size 20
13 pins size 16
size 22
19 pins size 16
size 24
25 pins size 16
size 28
37 pins size 16
size 32
54 pins size 16
69,9
55,5
69,9
55,5
69,9
69,9
55,5
55,5
69,9
55,5
55,5
69,9
4 ch
28 ch
48 ch
66 ch
size 40
85 pins size 16
size 40
150 pins size 18
size 40
200 pins size 20
Link www.linkitaly.com
3
Speaker Connectors
F
eaturing 8 and 9 pins version (4 pins
upon request) these connectors are
currently used by leading loudspeaker
manufacturers.
Fully intermateable with CA-COM style
connectors, they are becoming increasingly
popular in the market due to their robust
construction ideal for touring applications.
Link standard LKS Socapex style connector
has been adapted to be used as a 16 pins
speaker connector, following indications
from the largest international rental
companies. This configuration offers the
sufficient number of contacts for this
application with no risk of incorrect
interconnections with lighting connectors,
preserving the choice of various models
available in the LKS 19 pin standard range
(eg. rubber locking ring in various colors,
with set screw, long back shell etc.). The
standard LKS 19 pin connector is also
available (Socapex style), as utilized by
D&B. For all detailed informations please
see pages 16-17.
LKI 08 and LKI 09
8 or 9 pins (4 on request)
Waterproof up to 10 m (33 ft) for 12 hours
Easy and error-free mating
Skin top cable clamp
Audible snap in quick bayonet lock
Highly resistant black finishing
Excellent resistance against unlocking
Roller studs for easier coupling
Guaranteed for over 2000 coupling operations
High resistance to shock and vibrations
Rubber locking ring available on both bayonet
style and screw coupling connectors
4 pins speaker connectors available on
request.
LKA 16
16 to 19 pins
Screw coupling connectors
Silk screen identification
Excellent resistance against unlocking
Part no. like LKS (Pag 17) but with A instead of S after LK
For technical characteristics see Pag 16-17
4
Link www.linkitaly.com
LKI 08 Connectors
LKI 09 Connectors
Cable mounting
Panel mounting
Cable mounting
Panel mounting
Male
Male
Male
Male
LKI 08 MVD
8 poles gold pins
LKI 08 MPD
8 poles gold pins
LKI 09 MVD
9 poles gold pins
9 poles gold pins
LKI 09 MPD
Female reverse
LK 08R FVD
8 poles gold pins
Male reverse
Cable mounting with locking
ring
LKI 08R MPD
8 poles gold pins
Male reverse
LKI 08R MVD
Female
Female
LKI 09 FVD
8 poles gold pins
9 poles gold pins
9 poles gold pins
LKI 09 FPD
Female
Female
LKI 08 FVD
8 poles gold pins
Cable mounting with rubber
locking ring
8 poles gold pins
LKI 08 FPD
Cable mounting with rubber
locking ring
Male
Female reverse
Male reverse
LKI 08R MVPD
8 poles gold pins
LKI 09 FVPD
9 poles gold pins
Female
LKI 08 FVPD
8 poles gold pins
LKI 08R FPD
8 poles gold pins
Accessories
Dust caps
Dust caps
Rubber locking ring
For connectors:
w/o locking ring
w/ locking ring
LK 22 TPM
LK 22 TPF
For LKI 08
LK 22 RL*
*
B
R
G
Y
Blue
Red
Green
Yellow
Rubber locking ring
For connectors:
LK 20 TPM
LK 20 TPF
*
Items subjected to Minimum Order Qty
male pin
female pin
For LKI 09
LK 20 RL*
w/ locking ring
w/o locking ring
B
R
G
Y
Blue
Red
Green
Yellow
Items subjected to Minimum Order Qty
41
31,8
38
29,4
38
29,4
41
31,8
6 pins size 16
3 pins size 12
LKI 08
LKI 09
size 22
size 20
8 pins size 12
Link www.linkitaly.com
5
Multisignal Speaker
T
hanks to the continuous direct line with
its customers and the great flexibility in
autonomously manufacturing cables and
connectors, custom boxes and panels,
which have long distinguished Link as a
unique player in the sector, the company’s
challenge in recent years has been the
creation of solutions for the distribution of
different types of signals to satisfy those
specific needs which new equipment or
customer applications require. With
regards to speaker array connections, two
particular connectors and cables have
been developed to satisfy the needs of new
equipment requiring the connection of an
increasing number of different types of
channels in one sole connector mating.
LKA 24/6 utilized with eurocable
SPKAL 12/3 U2A2 can convey power (3x4
mm2), 2 AES/EBU audio channels and 2
CAT6 ethernet in one sole connection, and
has been purposely manufactured for the
transport of all necessary signals to the JBL
Self Powered Line Array.
LKA 48/6 was designed to connect the
speaker clusters utilizing the least possible
number of cables, precisely one sole 24
speaker lines cable for a total of 48 singlepole cables each with a 4 mm2 section.
Additionally, there was a need to have 2
AES/EBU channels for laser pointing and
inclinometer control. LKA 48/6 features a
mesh cable gland as standard.
Easy and error-free mating
Audible snap in quick bayonet lock
Excellent resistance against unlocking
Guaranteed for over 2000 coupling
Waterprof up to 10 m (33 ft) for 12 hours
Skin top (24/6) and mesh cable gland (48/6)
Highly resistant black finishing
Roller studs for easier coupling
High resistance to shock and vibrations
CUS LKSPKAL 12/3 U2A2 with 24/6 connector
can convey all necessary signals to the JBL Self
Powered Line Array.
CUS LK48N40AD2 with 48/6 connector allows
the connection of the speaker clusters utilizing the
least possible number of cables.
STANDARD WIRING
Panel
female
Panel
male
Line male
6
Link www.linkitaly.com
Line female
Panel
female
Panel
male
Line male
Line female
LKA 24/6 Connectors
LKA 48/6 Connectors
Cable mounting
Panel mounting
Cable mounting
Panel mounting
Male
Male
Male
Male
LKA 24/6R MV
30 poles w/pins
Female
Female
LKA 24/6R FV
30 poles w/pins
LKA 24/6R MP
30 poles w/pins
LKA 48/6 MV
LKA 48/6 MV K
54 poles w/pins
plus kellems
30 poles w/pins
LKA 24/6R FP
LKA 48/6 FV
LKA 48/6 FV K
Male
Female
LKA 48/6 P FV
LKA 48/6 P FV K
LKA 48/6 FP
54 poles w/pins
plus kellems
Cable mounting with rubber
locking ring
30 poles w/pins
54 poles w/pins
Female
Female
Cable mounting with rubber
locking ring
LKA 24/6R P MV
LKA 48/6 MP
54 poles w/pins
54 poles w/pins
plus kellems
Accessories
Dust caps
Rubber locking ring
For connectors:
LK 32 TPM
w/o locking ring
LK 32 TPF
w/ locking ring
LK 32 RL*
*
For LKA 24/6
B
R
G
Y
Blue
Red
Green
Yellow
Dust caps
Rubber locking ring
For connectors:
LK 40 TPM
w/o locking ring
LK 40 TPF
w/ locking ring
LK 40 RL*
*
Items subjected to Minimum Order Qty
male pin
female pin
For LKA 48/6
B
R
G
Y
Blue
Red
Green
Yellow
Items subjected to Minimum Order Qty
69,9
55,5
57
44,5
48 pins size 12
3 pins size 12
6 pins size 18
55,5
57
44,5
24 pins size 16
69,9
3 pins size 12
LKA 24/6
LKA 48/6
size 32
size 40
Link www.linkitaly.com
7
Hermaphrodite Connector
T
he LK M176 hermaphrodite connectors
are utilized in the market to have only two
versions of connectors, cable and panel.
The range consists of a cable and panel
version fully compatible with the traditional
MASS series connectors widely used in the
US professional audio market, often
referred to as W4 connector. Dust caps are
available for both models.
176 pins
Screw coupling connectors
Hermaphrodite insert
Heavy duty machined metal shell
IP 67 waterproof grade when mated
Skin top or mesh cable gland
Hightly resistant black finishnig
W Style Connectors
T
he LKW series connectors is based on
the proven military, quick-disconnect MIL26482 series.
Featuring a three point quick mating
bayonet coupling system and five insertion
key polarisation they ensure a secure
connection each time. Available in two
contact configurations, 39 and 61 gold
plated solder contacts fitted as standard.
39 or 61 pins
Easy and error-free mating
Audible snap in quick bayonet lock
Excellent resistance against unlocking
Guaranteed for over 2000 coupling operations
Waterproof up to 10 m (33 ft) for 12 hours
Skin top cable clamp
Highly resistant black finishing
Roller studs for easier coupling
High resistance to shock and vibrations
STANDARD WIRING
Panel
Panel
Line
8
Link www.linkitaly.com
Line
Panel
female
Panel
male
Line male
Line female
Hermaphrodite Connector
Panel mounting
Cable mounting
w/pins
LKI M176 PS
Accessories
w/pins
LKI M176 VS
Dust cap
Dust cap
LKI M176 TPP For panel connector
LKI M176 TPV For cable connector
W Style Connectors
Cable mounting
Cable mounting
Panel mounting
Panel mounting
Male
Female
Male
Female
LKW 39LM 39P w/pins and skin top
LKW 39LM D
plus dust cup
LKW 39LM DK
plus kellems
LKW 39LF 39P w/pins and skin top
LKW 39LF D
plus dust cup
LKW 39LF DK
plus kellems
LKW 39PM
LKW 39PM D
Cable mounting
Cable mounting
Panel mounting
Panel mounting
Male
Female
Male
Female
LKW 61LM 61P w/pins and skin top
LKW 61LM D
plus dust cup
LKW 61LM DK
plus kellems
LKW 61LF 61P w/pins and skin top
LKW 61LF D
plus dust cup
LKW 61LF DK
plus kellems
LKW 61PM
LKW 61PM D
Dust cap
Dust cap
Mesh cable gland
For connectors with locking ring
LKW MDC39
For LKW 39
LKW MDC61
For LKW 61
For connectors without locking ring
LKW FDC39
For LKW 39
LKW FDC61
For LKW 61
MCG PG2111
MCG PG2114
39P w/pins
plus dust cup
61P w/pins
plus dust cup
39P w/pins
plus dust cup
LKW 39PF
LKW 39PF D
LKW 61PF
LKW 61PF D
61P w/pins
plus dust cup
Accessories
male pin
female pin
For LKW 39-61 (cable OD from 14.30 mm to 17.40 mm)
For LKW 39-61 (cable OD from 19.10 mm to 22.20 mm)
67,4
44
35
41,5
1
LKI M176
176 pins size 20
2 pins size 16
LKW 39
44
35
41,5
Ø
,5
07
37 pins size 20
29,4
67,4
29,4
LKW 61
61 pins size 20
Link www.linkitaly.com
9
Coax Connectors
T
hree different arrangements to cover the
vast range of requirements in the video
sector which can support multiple coax
signal transmission, AES/EBU and/or
analog audio, ethernet, data, SCSI, etc..
LK Coax Connectors are available in
male/female configurations both cable and
panel versions to satisfy all connection
requirements.
High quality coax contacts (HDTV grade)
Easy and error-free mating
Audible snap in quick bayonet lock
Excellent resistance against unlocking
Guaranteed for over 2000 coupling operations
Waterproof up to 10 m (33 ft) for 12 hours
Skin top cable clamp
LKA 40/89: 80 pins size 18 for signal transmission, 6 coaxial pins, 3 pins size 12 for power. To obtain
improved performance they may be used with many eurocable hybrid cables.
Highly resistant black finishing
Roller studs for easier coupling
High resistance to shock and vibrations
SCSI Connectors
LKA 40/58: 46 pins size 18 for signal
transmission, 12 coaxial pins. To obtain improved
performance they may be used with many
eurocable hybrid cables.
LKA 40/18: 18 coaxial pins. To obtain improved
performance they may be used with many
eurocable hybrid cables.
R
eplacing the fragile D-Sub 68 pins half
pitch SCSI connector, a robust 72 pins LK
bayonet conception model has been
designed to offer high performance with
greater reliability.
72 pins
Easy and error-free mating
Audible snap in quick bayonet lock
Excellent resistance against unlocking
Guaranteed for over 2000 coupling operations
Waterproof up to 10 m (33 ft) for 12 hours
Skin top cable clamp
Highly resistant black finishing
Roller studs for easier coupling
10
High resistance to shock and vibrations
Link www.linkitaly.com
SCSI connectors: 72 pins size 20. To obtain improved performance they may be used with CVS LK
YMHSCSI cable.
LKA 40/18
LKA 40/58
LKA 40/89
SCSI
Cable mounting
Cable mounting
Cable mounting
Cable mounting
Male
Male
Male
Male
LKA 40/18 MV
LKA 40/18 MV K
18 poles
plus kellems
Female
LKA 40/58 MV
LKA 40/58 MV K
58 poles
plus kellems
Female
LKA 40/18 FV
LKA 40/18 FV K
18 poles
plus kellems
89 poles
plus kellems
LKA 40/89 MV
LKA 40/89 MV K
Female
LKA 40/58 FV
LKA 40/58 FV K
58 poles
plus kellems
72 poles
LK2324702
Female
89 poles
plus kellems
LKA 40/89 FV
LKA 40/89 FV K
72 poles
LK2324602
Cable mounting with rubber
locking ring
Cable mounting with rubber
locking ring
Cable mounting with rubber
locking ring
Cable mounting with rubber
locking ring
Female
Female
Female
Male
LKA 40/18 P FV
LKA 40/18 P FV K
18 poles
plus kellems
LKA 40/58 P FV
LKA 40/58 P FV K
58 poles
plus kellems
89 poles
plus kellems
LKA 40/89 P FV
LKA 40/89 P FV K
72 poles
LK2324703
Panel mounting
Panel mounting
Panel mounting
Panel mounting
Male
Male
Male
Male
18 poles
LKA 40/18 MP
Female
58 poles
LKA 40/58 MP
Female
18 poles
LKA 40/18 FP
89 poles
LKA 40/89 MP
Female
58 poles
LKA 40/58 FP
72 poles
LK2324652
Female
89 poles
LKA 40/89 FP
72 poles
LK2324502
Accessories
Dust cap
Dust cap
Rubber locking ring
For connectors without locking ring
LK 40 TPM
For coax connectors
For connectors with locking ring
LK 40 TPF
For coax connectors
LK 40 RL*
*
Dust caps
For Coax connectors
B
R
G
Y
Blue
Red
Green
Yellow
For connectors:
LK 28 TPM
w/o locking ring
LK 28 TPF
w/ locking ring
Items subjected to Minimum Order Qty
69,9
55,5
69,9
55,5
50,8
39,7
80 pins size 18
6 coaxial pins
3 pins size 12
LKA 40/18
LKA 40/58
LKA 40/89
size 40
size 40
size 40
50,8
39,7
46 pins size 18
12 coaxial pins
69,9
55,5
18 coaxial pins
69,9
55,5
69,9
55,5
69,9
55,5
male pin
female pin
LK SCSI
size 28
72 pins size 20
Link www.linkitaly.com
11
LKH Head To Ballast Connectors
The
LKH range is the head-to-ballast
interconnection solution. Covering the
range from 400 W to 20 kW used by the
lighting
industry,
LKH
connectors
incorporate features which ensure high
quality, extreme durability and safe
connections between ballast and lamps.The
comprehensive range of available versions,
including color code identification, along
with its accessories make LKH connectors
suitable for all possible applications.The
coupling mechanism, the area most
affected by wear and tear, features a thick
machined construction and utilizes roller
studs to allow easy coupling.
Highly resistant black finishing
Front and rear panel mounting available
Roller studs coupling pins
Machined backshells
IP 67 waterproof grade when mated
First In Last Out ground contacts
Shell grounding
Silver plated solder or crimp style contacts
Suitable to fit various cable overall diameter
Example
Photo
A
Item
A
LKH 26-24-2-PSSW-00PG
B
LKH 01-24-2-SSS0-P21PG
C
LKH 06-24-11-PSS0-P21BG
D
LKH 02-24-11-SSS0-00PG
male pin
female pin
LKH 16S-1
size 16
B
C
D
More arrangements available, please contact us for other configurations
LKH 20-15
size 20
LKH 24-2
size 24
LKH 24-11
size 24
LKH 28-3
size 28
LKH 28-6
size 28
LKH 28-10
size 28
LKH 28-22
size 28
LKH 28A-9
size 28
LKH 32-68
size 32
LKH 40A-10
size 40
Accessories
Dust caps
For male and female connectors
12
Rubber locking ring
*
B
R
G
Y
Blue
Red
Green
Yellow
Items subjected to Minimum Order Qty
Link www.linkitaly.com
Ground pin
Shell contact
See connectors ordering code table
Body Ground
See contacts ordering code table
Special Version
LKH Head To Ballast Connectors
LKH Connectors ordering code
Connector Type
Line without locking ring
Panel without locking ring
Line with locking ring
Panel with locking ring
01
02
06
26
Arrangement
16S-1
20-15
24-2
24-11
28A-9
28-10
28-22
28-3
28-6
32-68
40A-10
LK H
-
-
Body ground
No
Yes
Insert/contact version
Female/Female
Male/Male
Female/Male
Male/Female
S
P
SP
PS
Pins version
No
Gold
Silver
0
G
S
Pins type
No
Crimp
Solder
PCB
Screw
0
C
S
P
V
Backshell
No
Black aluminium
Cable relief
No
PG 11
PG 13.5
PG 16
PG 21
PG 29
PG 36
PG 11
with
PG 13.5
with
PG 16
with
PG 21
with
Insert rotation
Insert rotation 16S-1
W
80
X
Y
Z
280
Size
00
04
08
12
16
18
20
20-15
80
280
24-2
80
280
P (Watt)
575
1.200
2.500
4.000
6.000
12.000
18.000
Insert rotation degrees
Arrangement
28-3
28-6
70
70
145
145
215
215
290
290
24-11
35
110
250
325
0
P
spring
spring
spring
spring
28A-9
110
250
260
280
0
11
13
16
21
29
36
11S
13S
16S
21S
28-10
80
110
250
280
LKH Contacts ordering code
LK P
Version
Female
Male
S
P
Treatment
Gold
Silver
Pins size
4
8
12
16
Total
Special version
Assigned by Link
16S-1
7
7
Arri
24-2W
24-2W
24-2
24-2
28-22 (2)
28A-9 (2)
28A-9 (2)
20-15
24-2
7
7
7
7
De Sisti
24-2Z
24-2W
24-2
24-11
32-68
32-68
32-68
G
S
Strand
24-2Z
24-2W
24-2
24-11
32-68
40A-10
40A-10
Arrangement by manufacturer
CMC
Mole
24-2Z
24-2Z
24-2W
24-2W
24-2
24-2
24-11
24-2
32-68
28A-9 (1)
28-10
40A-10
28-10
40A-10
Shell*/locking ring
Hard black locking ring
Black aluminium shell for
01 and 02 connector type
Black aluminium shell for
06 and 26 connector type
Black aluminium shell with
black rubber locking ring
Black aluminium shell with
blue rubber locking ring
Black aluminium shell with
green rubber locking ring
Black aluminium shell with
red rubber locking ring
Black aluminium shell with
yellow rubber locking ring
H
P
P
B
BI
G
R
Y
*Anodized colored locking ring version
also available.
28-22
70
145
215
290
32-68
65
135
225
275
40A-10
65
125
225
310
Special version
Extended (ground)
Protected
E
P
Max wire size for crimp type
mm2........
Type
Crimp
Solder
PCB
Screw
Type and quantity of contacts by connector
Arrangement
24-11
28-3
28-6
28A-9
3
4
3
3
6
5
9
3
3
9
0
G
C
S
P
V
28-10
2
2
3
7
Lee
16S-1
20-15
20-15
24-11X
24-11
24-11
28-22
3
32-68
3
40A-10
4
3
6
6
9
4
8
LTM
20-15
20-15
24-2
24-11
28A-9 (1)
28A-9 (2)
28A-9 (2)
Sunray
24-2Z
24-2W
24-2
24-11
28A-9 (1)
28-10
28-10
(1) Male pins on connector with locking ring · (2) Female pins on connector with locking ring
Link www.linkitaly.com
13
Power Link
T
he Power Link single pole connector
series is designed for power distribution
systems, offering the ultimate features in
safety and reliability under the most severe
operating conditions. Typical applications
for Power Link include three-phase motors,
generators, load banks and lighting
distribution panels. Power Link connectors
are also suitable for utility companies and
heavy industry environments. Power Link
connectors are designed and tested to
comply with European and US electrical
safety standards and specifications. They
are available in 400 A and 660 A versions.
Secondary
660 A Line Source
400 A Line Source
locking: to prevent accidental
disconnection
660 A Line Drain
Dead front contacts: insulated nylon tip on the live
contact prevents accidental handling.
High impact insulators: glass filled nylon
insulators prevent damage due to mishandling and
guarantee a high degree of insulation, with maximum
resistance to oil, fuel, acids and water.
Multipoint contact: 23 sprung contact element
grants a minimum insertion force and guarantees
multiple points of contact, ensuring minimal power loss.
Integral location keys: each connector type is
400 A Panel Drain
individually keyed to eliminate the possibility of
accidental cross mating.
Color coded: insulators are supplied as with
standard color identification codes.
Waterproof: IP 67 rated sealing when mated.
OK
The Power Link connector series has
permanent integral keys which prevent the
accidental connection of dissimilar types
(e.g. Earth and line 1). Each connector type
has a unique keyed position. Visual
identifications are easily made by means of
the color insulators.
The sole locking system featuring the connection of
the protected contact purely on metal parts
The drain protected connector features a
patented double protection to prevent
accidental touch of the drain contact under
load. The drain contact must be unlocked
supplying uniform pressure on the entire
Teflon part (by means of the female
connector).
The secondary locking pin
can be unlocked through the
Pin Key using only one hand.
STANDARD WIRING
Panel drain
Panel source
Line source
14
Line drain
Line drain
Link www.linkitaly.com
Line source
Power Link
Technical data
Max Current Rating
Minimum Flashover
Maximum Rated Voltage to Earth
Operating Voltage
Operating Temperature
Insulation Resistance
AWG/mm2
Threaded M 12 Torque Maximum
IP Rating (mated condition)
Operating Cycles
400 A
9.5 kV dc or ac
2 kV ac/3kV dc
600 Vac
-30 to 125 C°
>5 M Ω/500 Vdc
2-4/0 33.6-107.2
12.0 Nm
IP 67
500 minimum
660 A
9.5 kV dc or ac
2 kV ac/3kV dc
600 Vac
-30 to 125 C°
>5 M Ω/500 Vdc
6/0 170.3
12.0 Nm
IP 67
500 minimum
GROUND
KEY 1
NEUTRAL
KEY 2
LINE 1
KEY 3
LINE 2
KEY 4
LINE 3
KEY 5
EUROPE HD 308 S2
GN
BL
BN
BK
GR
U.S.A.
GN
W
BK
R
BL
How to order Connectors
Max Current Rating
400A
6
660A
Cable Grip
LK PL
Type
LD
LS
PD
PS
LD
1
Line Drain
Line Source
Panel Drain
Panel Source
Male Protected Version
Standard Version
P
Male Protected Version
Key
1
2
3
E
N
Phase 1
Phase 2
Phase 3
Ground
Neutral
Accessories
BN
Colors
BN
BK
GR
GN
BL
R
W
*
Brown
Black
Grey
Green
Blue
Red
White
MN
MR
ML
PG29
M40x1,5 19-28 mm
M40x1,5 10-23 mm
M40x1,5 22-32 mm
Contact Type
C1
C2
C3
C6
Screw Type
Crimp contact 35-50 mm2
Crimp contact 70-95 mm2
Crimp contact 120-150 mm2
Crimp contact up to 300 mm2
Locking Pin (only for Drain type)
Without secondary locking pin
L
With secondary locking pin
Spare parts
Pin Key
Dust caps
Only available for EU HD 308 S2 version
LK PL KEY
Pin Key
Drain
Source
LK PL TPD*
LK PL TPS*
1BN
2BK
3GR
EGN
NBL
Brown
Black
Grey
Green
Blue
LK PL LOCK
Drive pin
LK PL R*
Compression sleeve
*35
(35 mm2)
*50
(50 mm2)
*70
(70 mm2)
*95
(95 mm2)
*120
(120 mm2)
Link www.linkitaly.com
15
LKS 19 Pin
T
he LKS connectors range has been
specifically designed for professional
lighting applications. While maintaining
full compatibility with Socapex SL 419
series, LKS connectors represent a real
breakthrough in terms of reliability and
safety. Featuring machined contacts, they
accept conductors from 1.5 to 4 mm2. The
neoprene insert guarantees greater
reliability as well as the possibility to insert
and eject contacts for crimping and
maintenance. Also available with rubber
locking ring and with hardened anodized
finish that guarantees greater scratch
resistance. The backshell design allows
adequate working room for crimping
operations. LKS is provided with IP 67
water-tight cable clamp.
Screw coupling connector
Ground first connection
Tulip or retention spring pin
Dual ground rings
Plastic insulating sleeve
Body ground fulfilling UL & NEC requirement
Standard version: IP 67 waterproof
Gold plated solder or crimp style contacts
PG29, PG36, PG42, M40 and spider versions
Long back shell and integrated locking set screw
upon request
Rubber coated locking rings
(also in colored versions)
UL-CSA
The highest UL-CSA Rating obtained with a
rubber insert:
UL Recognized for 25 A of continuous current
(20A CNR)
The exclusive rubber silk-screened insert
provides for easy and secure pin insertion
while maintaining the highest continuous
current ratings. The gold plated contacts with
retaining spring pins ensure reliable mating
every time.
LKS 19 Pin Spider Connector
The LKS 19 pin spider connector utilized for breakins and break-outs is the only available connector
which maintains the width of the PG29
configurations and guarantees secure fan out
terminations with a highly resistant strain relief. IP 64
rated, this version features long back shell and
integrated locking set screw as standard features.
LKS 19 Pin Splitter
A tough rubber moulding with incoming
LKS 19 pin male connector and two
outgoing LKS 19 pin female connectors.
STANDARD WIRING
Panel
male
16
Line female
Link www.linkitaly.com
Line male
Line female
Line male
Panel
female
LKS 19 Pin
LKS Ordering code
D
LKS
Version
Die cast aluminium
Machined aluminium
LMS
PA M29
B
1
Cable relief
Plastic PG29
Plastic PG36
Plastic PG42
Aluminium (silver) w/stainless mesh PG29
Aluminium (silver) w/stainless mesh PG36
Rubber six way x 1,5 mm2 cable
Rubber six way x 2,5 mm2 cable
Plastic M40x1,5
Plastic M40x1,5 R
D
M
Connector Type
Line male solder
Line male crimp
Line female solder retention tulip
Line female solder tulip
Line female crimp retention tulip
Line female crimp tulip
Panel male solder
Panel male crimp
Panel female solder retention tulip
Panel female solder tulip
Panel female crimp retention tulip
Panel female crimp tulip
LMS
LMC
LFSR
LFST
LFCR
LFCT
PMS
PMC
PFSR
PFST
PFCR
PFCT
Locking ring material
Aluminium black painted
Aluminium black rubberized
Aluminium colored rubberized
Aluminium black anodized
Aluminium colored anodized
Without ring
**
Shell & Backshell color
Black painted
Black anodized
Colored anodized
B
R
G
Y
GR
Blue
Red
Green
Yellow
Grey
*
Retention Spring Pins
The conventional 4 blade tulip style pin
provides the ample contact surface
area for maximum conduction.
The enhanced spring pin provides the
maximum surface area of a
conventional tulip pin with the added
benefit of a stainless steel spring clip.
This combination, only available from
LK Connectors, enables the tulip to
provide tighter retention and improves
reliability over the life of the connector.
M29
M36
M42
L29
L36
MS
M40
X
B
R
G
Y
S
Blue
Red
Green
Gold
Silver
Items subjected to Minimum Order Qty
Items subjected to Minimum Order Qty
Tulip Pins
B
A
A*
Backshell version
Aluminium PG29
Aluminium PG36
Aluminium PG42
Aluminium long vers. PG29
Aluminium long vers. PG36
Aluminium for six way cable relief
Aluminium metric thread M40
Set Screw version: add
PA
RA
R**
A
*
blank space
1
2
3
4S
5S
S1
S2
6
6R
Durable Backshell
Available in two lengths for
ultimate serviceability.
Serviceable Plastic
Insulating Sleeve
The anodized aluminium
version is available in
multiple colors (see color
table above).
Easily installed or removed once
terminations are completed. They
provide a dependable insulator
between the connector housing and
internal conductors.
Accessories
Dust cap
Dust cap
Rubber locking ring
For connectors:
LKS 19 TPM
w/ locking ring
For connectors:
LKS 19 TPF
w/o locking ring
Robust strain relief
For LKS
CLRLRL32*
Items subjected to Minimum Order Qty
PG29 and PG36 configurations, with two
size Spider grips for fan in/out. Optional
PG42, M40 or mesh cable gland are also
available.
121 approximately
131 approximately
144 approximately
LKS with PG29 backshell
LKS with PG36 backshell
LKS 19 Spider
*
B
R
Blue
Red
G
Y
Green Yellow
GR
Grey
male pin
female pin
57,2
41
57,2
41
LKS
19
LKS 19
19 pins size 12
Link www.linkitaly.com
17
LK Tools
LK CRIMP
The crimp contact option for the LKA, LKS and LKH range of connectors, allows large assembly
time savings, and gives a perfect, reliable and durable connection with the use of LK CRIMP or LK
CRIMP PN with Turret tools (LK TR).
SEL. NO.
SELECTOR KNOB
Crimping tool for LKA-LKS-LKH
Pneumatic crimping tool for LKA-LKS-LKH
LK CRIMP
LK CRIMP PN
POSITIONER
TURRET
Every pin size has its own positioner (LK
PS..), to be mounted on the universal turret
LK TR. The mounting position is selected
following the female or male contact type.
The turret, fitted on the LK CRIMP, allows the
positioner’s assembly.
LK PS 18
LK PS 12
LK PS LKS
LK
LK
LK
LK
LK
PS
PS
PS
PS
PS
LK PS 16
Turret
LK TR
SELECTOR KNOB POSITIONS
Contact AWG AWG AWG AWG AWG Wire
Size
26
24
16
14
12
Size
20
1
2
18
1
2
Sel
16
1
2
No.
12
6
7
8
A few examples of the most popular
combinations of contact/wire sizes
DRIVE PIN
Female contacts may be inserted with the aid
of the plug LK SP (12, 12 LKS, 16, 18 or 20)
as shown in the drawing.
LKS
Positioner for LKS pins
12
Positioner for pins size 12 LKH
16 Positioner for pins size 16 LKA 13-85
18
Positioner for pins size 18 LK 150
20
Positioner for pins size 20 LK 200
INSERTER
The insertion of contacts is made by the
inserter LK INS (12, 16, 18 or 20 following
the contact size). For easier contact insertion
use an alcohol lubricant.
LK
LK
LK
LK
LK
LK INS
Pin
LK SP
LK INS12
LK INS16
LK INS18
18
Inserter for pin size 12 (LKS - LKH)
Inserter for pin size 16
(LK 13-85 poles)
Inserter for pin size 18-20
(LK 150-200 poles)
Link www.linkitaly.com
SP LKS
Drive pin for LKS
SP12
Drive pin size 12 for LKH
SP16
Drive pin size 16 for LK 13-85 poles
SP18
Drive pin size 18 for LK 150 poles
SP20
Drive pin size 20 for LK 200 poles
LK Tools
DUMMY
LK K BK KEY
Dummy range is available for the assembly of the LK connector back shells. Dummy tools can be
fixed to a panel or gripped in a vice: lock the back shell in place by means of the LK K BK key.
Once the LK K has been fixed to the panel or to the vice, place the connector for assembly in the
mating position. Next, screw the back shell firmly into place with the LK K BK key. This allows to
screw the backshell at best, avoiding unscrewing during operations.
LK K BK-KIT LK tighten tool-strap wrench-set of two
Recommended Tightening Torque
LK
LK
LK
LK
LK
LK
LK
LK
LK
LK
K
K
K
K
K
K
K
K
K
K
Dummy for size 20 (13 poles)
Dummy for size 20 (13 poles with locking ring)
Dummy for size 24 (25 poles)
Dummy for size 24 (25 poles with locking ring)
Dummy for size 28 (37 poles)
Dummy for size 28 (37 poles with locking ring)
Dummy for size 32 (54 poles)
Dummy for size 32 (54 poles with locking ring)
Dummy for size 40 (85/150/200 poles)
Dummy for size 40 (85/150/200 poles with locking ring)
20
20LR
24
24LR
28
28LR
32
32LR
40
40LR
LK EX
PG & METRIC
THREAD
PG11
PG13.5
PG 16
PG 21
PG 29
PG 36
PG 42
M40 X 1.5
Torque
Torque
Backshell/Clamp for cap nut
(Nm)
(Nm)
3.75
2.5
3.75
2.5
5.0
3.3
7.5
5.0
7.5
5.0
7.5
5.0
7.5
5.0
13.0
13.0
EJECTOR HANDLE
EJECTOR
To extract the contacts the use of LK EX
MNUNIV ejector is required; it contains the
metal points suitable for the different sizes (LK
EX..), both for female and male contacts.
The main contacts used in the LK range can
be contained inside the LK EX MNUNIV and
must be screwed into the front part of the
Handle.
LK EX MNUNIV
Handle
The handle on which the ejector points are screwed
on. This unit also contains them internally by
opening the rear lid.
Pin
Shell
Size
16S
18
20
22
24
28
32
40
Shell/Backshell
Coupling Torque Uncoupling Torque
Maximum
Minimum
(Nm)
(Nm)
2.71
0.45
3.16
0.56
3.61
0.68
4.06
0.78
4.96
0.78
5.88
0.90
7.35
1.01
8.34
1.47
LK
LK
LK
LK
LK
LK
LK
LK
LK
EX12F
EX12F R
EX12M
EX16F
EX16M
EX18F
EX18M
EX20F
EX20M
Female
Male
Female
Male
Female
Male
Female size 12 LKS
Female size 12 LKH
Male size 12 LKS
size 16 for connector LK
size 16 for connector LK
size 18 for connector LK
size 18 for connector LK
size 20 for connector LK
size 20 for connector LK
Link www.linkitaly.com
19
Cable Reliefs
SKIN TOP · Cable Clamp
T
he use of SKIN TOP cable clamps, which
are important accessories in the industrial
field, allows perfect connection of any
cable to all types of equipment, ensuring
perfect functioning. They are mostly used in
the audio-lighting environment, as cable
clamps for multipin connectors and cable
entries in various types of boxes, e.g. stageboxes. SKIN TOP cable clamps allow easy
and quick installation. The new trapezoidshaped multiple thread allows rapid
tightening. The IP 68 watertight cable
clamp is mounted on the tightening nut,
ensuring a firm grip with no traction and no
loosening risk.
Cable O.D.
PG11
PG13,5
PG16
PG21
PG29
5 to 10 mm
6 to 12 mm
10 to 14 mm
13 to 18 mm
18 to 25 mm
Metal Skin Top
Cable clamp with anti-bend spiral, range
from PG 11 to PG 21. It provides additional
safety to the cable preventing it to be curved
over its bend radius. Black (RAL 9005).
Water-tightness degree IP 68.
Available on request, nickel-plated brass
cable clamp for heavy-duty applications.
With all the advantages of the Skin Top
range. Water-tightness degree IP 68. Range
from PG 11 to PG 36.
Skin Top
Code
SK
SK
SK
SK
SK
SK
From
From
From
From
From
Skin Top with spring
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
SK
SK
SK
SK
TOP
TOP
TOP
TOP
PM13
PM19
PM35
PM54
Description
For SK TOP
For SK TOP
For SK TOP
For SK TOP
For SK TOP
For SK TOP
MD13
MD19
MD35
MD54
MD85
MD150
MN
MN
MN
MN
MN
MN
SK
SK
SK
SK
SK
SK
TOP
TOP
TOP
TOP
TOP
TOP
SK
SK
SK
SK
SK
SK
Description
MN13 PG11 for cables 5-10 mm
MN19 PG13.5 for cables 6-12 mm
MN35 PG16 for cables 10-14 mm
MN54 PG21 for cables 13-18 mm
MN85 PG29 for cables 18-25 mm
MN150 PG36 for cables 22-32 mm
Plastic nut
Code
13
19
35
54
85
150
Metal Skin Top
Code
Description
PG11 for cables 5-10 mm
PG13,5 for cables 6-12 mm
PG16 for cables 10-14 mm
PG21 for cables 13-18 mm
Metal nut
Code
SK
SK
SK
SK
SK
SK
Skin Top with spring
Code
Description
PN13 PG11 for cables 5-10 mm
PN19 PG13,5 for cables 6-12 mm
PN35 PG16 for cables 10-14 mm
PN54 PG21 for cables 13-18 mm
PN85 PG29 for cables 18-25 mm
PN150 PG36 for cables 22-32 mm
TOP
TOP
TOP
TOP
TOP
TOP
Description
For SKINTOP
For SKINTOP
For SKINTOP
For SKINTOP
For SKINTOP
For SKINTOP
PD13
PD19
PD35
PD54
PD85
PD150
PG11
PG36
PG13.5
PG16
PG21
PG29
When Skin tops are used for panel mount, a nut (plastic or metal) will be required
Mesh cable gland & grip
T
he MCG grips series features a patented swivel design that provides
superior cable pull-out protection. This unique design virtually eliminates
premature mesh fatigue thereby maximizing both cable and connection life so
that downtime and costs are greatly reduced. This is the only swivel grip for
extreme flexing applications that is specified by industry experts to meet their
flexing requirements.
Mesh cable gland
Code
Mesh cable grip
Code
20
MCG
MCG
MCG
MCG
MCG
SE013
SE014
SE015
SE016
SE017
Description
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Link www.linkitaly.com
grip
grip
grip
grip
grip
-
Cable
Cable
Cable
Cable
Cable
OD
OD
OD
OD
OD
from
from
from
from
from
12.70
16.00
19.10
25.40
31.80
mm
mm
mm
mm
mm
to
to
to
to
to
13.20
18.80
22.90
31.50
37.80
mm
mm
mm
mm
mm
MCG
MCG
MCG
MCG
MCG
MCG
MCG
MCG
MCG
MCG
PG1108
PG1609
PG1611
PG2111
PG2114
PG2914
PG2916
PG2918
PG2920
PG3618
Description
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
Mesh cable
gland
gland
gland
gland
gland
gland
gland
gland
gland
gland
PG11
PG16
PG16
PG21
PG21
PG29
PG29
PG29
PG29
PG36
-
Cable
Cable
Cable
Cable
Cable
Cable
Cable
Cable
Cable
Cable
OD
OD
OD
OD
OD
OD
OD
OD
OD
OD
from
from
from
from
from
from
from
from
from
from
11.10
11.10
14.30
14.30
19.10
19.10
22.20
25.40
28.60
25.40
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
to
to
to
to
to
to
to
to
to
to
12.70
14.30
17.40
17.40
22.20
22.20
25.40
28.60
31.80
31.80
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Dimensional Data
Cable Dimension to be used with PG or Metric Glands
mm 0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
PG48
PG
PG42
PG36
PG29
M63
PG21
M50
PG16
PG13,5
M40
PG11
M32
PG9
M25
PG7
M20
M16
METRIC
M7
mm 0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
LKA Dimensional Data
Size
20
24
28
32
40
No. Pins
L1
mm
34.2
36.0
36.2
37.6
13
25
37
54
85
37.6
150/200
L2
L2 mm
mm 03 Rear mount.
19.0
23
20.6
23
20.6
24
22.2
24
22.2
L3
mm
4
4
4
4
L4
mm
38.0
44.5
50.8
57.0
L5
mm
29.4
34.9
39.7
44.5
D1
mm
34.2
40.9
46.7
53.4
D2
mm
28.5
35.3
41.4
47.8
D3
mm
3.2
3.7
3.7
4.3
4
69.9
55.5 65.5
59.0
4.3
24
Size
20
24
28
32
40
No. Poli
LKA
13
25
37
54
85
150/200
L1
mm
38.6
41.0
41.8
44.0
L3
mm
4
4
4
4
L4
mm
38.0
44.5
50.8
57.0
L5
mm
29.4
34.9
39.7
44.5
D1
mm
42.5
49.6
56.5
63.5
D3
mm
3.2
3.7
3.7
4.3
45.0
4
69.9
55.5
75.5
4.3
Pins
Contact Size
20
18
16
12
8
4
0
Max Current
(Short time)
7.5 A
10 A
22 A
41 A
73 A
135 A
245 A
Rated and Test Current
7.5 A
7.5 A
13 A
23 A
46 A
80 A
150 A
Potential Drop
Maximum
83 mV
83 mV
74 mV
63 mV
65 mV
58 mV
53 mV
Link www.linkitaly.com
21
Standard Wiring
Ch
+
1
B
2
F
3
J
4
N
General ground
C
K
D
M
L
G
E
H
A
G
Ch
+
1
E
2
B
3
H
4
S
5
L
6
V
7
P
8
a
9
c
10
e
11
n
12
e
General ground
6 ch - LK 19
Ch
+
1
B
2
E
3
H
4
L
5
P
6
T
General ground
C
F
J
M
R
U
V
G
A
D
G
K
N
S
E
C
H
L
P
S
X
V
A
F
C
J
T
M
W
R
b
d
f
p
s
Z
Ch
+
1
A
2
E
3
J
4
N
5
S
6
X
7
a
8
d
9
h
10
k
11
p
12
t
13
w
14
z
15
AC
16
AF
17
AK
18
AP
19
AT
20
AW
21
AZ
22
BC
23
BJ
24
BM
25
BS
26
BV
27
BH
28
W
General ground
G
A
G
D
K
U
N
X
g
j
m
h
k
16 ch - LK 54
Ch
+
1
W
2
J
3
k
4
E
5
e
6
B
7
Z
8
D
9
d
10
A
11
Y
12
C
13
c
14
F
15
g
16
S
General ground
8 ch - LK 25
Ch
+
1
A
2
G
3
D
4
M
5
Q
6
W
7
T
8
Z
General ground
28 ch - LK 85
12 ch - LK 37
4 ch - LK 13
G
F
B
J
K
N
R
Y
U
f
R
v
M
q
H
j
L
p
G
h
K
n
N
s
b
AG
G
r
a
AC
V
y
P
u
U
x
O
t
T
w
X
AB
m
B
F
K
P
T
Y
b
f
i
m
q
u
x
AA
AD
AH
AL
AR
AU
AX
BA
BD
BK
BN
BT
BR
AN
M
V
G
C
H
L
R
U
Z
c
g
j
n
r
v
y
AB
AE
AJ
AM
AS
AV
AY
BB
BE
BL
BP
BU
BF
S
D
male pin
female pin
4 ch - LK13
28 ch - LK85
22
Link www.linkitaly.com
6 ch - LK19
32 ch - LK100
8 ch - LK25
12 ch - LK37
48 ch - LK150
16 ch - LK54
66 ch - LK200
Standard Wiring
48 ch - LK 150
32 ch - LK 100
Ch
+
1
1
2
4
3
7
4
10
5
13
6
16
7
19
8
22
9
25
10
28
11
31
12
34
13
37
14
40
15
43
16
46
17
49
18
52
19
55
20
58
21
61
22
64
23
67
24
70
25
73
26
76
27
79
28
82
29
85
30
88
31
91
32
94
33
97
General ground
2
5
8
11
14
17
20
23
26
29
32
35
38
41
44
47
50
53
56
59
62
65
68
71
74
77
80
83
86
89
92
95
98
100
G
3
6
9
12
15
18
21
24
27
30
33
36
39
42
45
48
51
54
57
60
63
66
69
72
75
78
81
84
87
90
93
96
99
LKS - 6 Lamps
Ch
Fase
1
1
2
3
3
5
4
7
5
9
6
11
General ground
Neutral
2
4
6
8
10
12
19
Graund
13
14
15
16
17
18
Ch
+
1
1
2
5
3
8
4
11
5
14
6
17
7
21
8
24
9
27
10
20
11
32
12
35
13
38
14
41
15
44
16
47
17
50
18
53
19
57
20
60
21
63
22
66
23
69
24
72
25
75
26
78
27
82
28
85
29
88
30
91
31
94
32
97
33
100
34
103
35
56
36
107
37
110
38
113
39
116
40
119
41
122
42
125
43
139
44
130
45
133
46
136
47
140
48
143
General ground
2
6
9
12
15
18
22
25
28
30
33
36
39
42
45
48
51
54
58
61
64
67
70
73
76
79
83
86
89
92
95
98
101
104
81
108
111
114
117
120
123
126
128
131
134
137
141
144
150
66 ch - LK 200
G
3
7
10
13
16
19
23
26
29
31
34
37
40
43
46
49
52
55
59
62
65
68
71
74
77
80
84
87
90
93
96
99
102
105
106
109
112
115
118
121
124
127
129
132
135
138
142
145
Ch
+
1
A1
2
A4
3
B8
4
B7
5
B4
6
B1
7
C3
8
C7
9
D12
10
D9
11
D6
12
D3
13
F1
14
E3
15
E6
16
E9
17
E12
18
F13
19
F10
20
F7
21
F4
22
G1
23
G4
24
G7
25
G10
26
G13
27
H14
28
H11
29
H6
30
H3
31
L1
32
L4
33
H7
34
H8
35
L9
36
L12
37
M14
38
M11
39
M6
40
M3
41
N1
42
N4
43
N7
44
N10
45
N13
46
P13
47
P10
48
P7
49
P4
50
P1
51
R3
52
R6
53
R9
54
R12
55
S12
56
S9
57
S6
58
S3
59
T1
60
T3
61
T7
62
T11
63
U7
64
U4
65
V1
66
V4
General ground
A2
A5
C10
B6
B3
C2
C4
C8
D11
D8
D5
D2
E1
E4
E7
E10
E13
F12
F9
F6
F3
G2
G5
G8
G11
G14
H13
H10
H5
H2
L2
L5
L7
L8
L10
L13
M13
M10
M5
M2
N2
N5
N8
N11
N14
P12
P9
P6
P3
R1
R4
R7
R10
R13
S11
S8
S5
S2
T2
T4
T8
T10
U6
U3
V2
V5
T6
G
A3
A6
C11
B5
B2
C1
C5
C9
D10
D7
D4
D1
E2
E5
E8
E11
F14
F11
F8
F5
F2
G3
G6
G9
G12
G15
H12
H9
H4
H1
L3
L6
M7
M8
L11
L14
M12
M9
M4
M11
N3
N6
N9
N12
N15
P11
P8
P5
P2
R2
R5
R8
R11
P14
S10
S7
S4
S1
U1
T5
T9
U8
U5
U2
V3
V6
Link www.linkitaly.com
23
Terms of Sale
PRICES
accompanied by a regular Return Bill detailing invoice numbers for
All prices are expressed in Euro (E), excluding V.A.T. and may be
each item returned, the products will be credited at the price applied
subject to change without any notice.
at the time of purchase, less 10%. Goods accepted back as defective
that should show marks of poor packing or improper use, will not be
PAYMENT
replaced but immediately returned to the buyer freight collect.
All goods must be paid in advance by wire transfer. Any other
payment terms must be previously agreed and allowed by LINK Srl.
WARRANTY
The warranty is limited to the replacement of the products which are
ORDERS
Minimum order value is E 1.000. A written order must always be
sent, either by email or by fax, as confirmation of telephone
instructions. The contractual tie raised from the accomplishment of
each single order is governed by the regulations of these conditions
of sale. The buyer renounces to its own possible conditions of
purchase, unlessdifferently agreed upon and specifically accepted in
writing by LINK Srl.
recognized as defective, except when directly or indirectly damaged,
as per art. 1490 and subsequent amendments of the Italian Civil
Code. The warranty does not include the normal perishability of
goods nor the consequences of incorrect installation or breakage
caused by improper use or lack of care. The products have to be
perfectly
installed
attentively
following
the
instructions
of
mounting/use. With this aim, the buyer exempts LINK Srl from any
responsibility regarding improper use, non-observance of the safety
regulations, technical specifications or instructions of use.
DELIVERY
Goods are normally dispatched within one week from confirmation of
order. Nevertheless this delivery term is purely arbitrary as it may
depend on both production times and circumstances beyond our
control such as strikes, customs clearance and carriers. LINK Srl
TECHNICAL SPECIFICATIONS
All products are liable to change without prior notice, in view of the
manufacturing policy based on “continuous improvement” of the
product quality.
cannot therefore be responsible in any case and for any reason for
any damage caused by delayed deliveries. The buyer is not
OWNERSHIP
authorized in any case to cancel the order, without prior written
In case of total or partial invoice payment failure over the due term,
authorization, or to claim for any reimbursement of damages to any
the relative interests will be immediately charged to the buyer at the
order or shipment whatsoever.
current rate as well as the additional bank commissions and fees.
LINK Srl will be authorized to hold any further supply of goods in case
SHIPMENTS
All goods are shipped Ex-Works and travel at the buyer’s risk. For this
purpose, the buyer must indicate the means of transport chosen when
placing the order. LINK Srl will not be responsible for any theft, loss
or damage with regard to the carriage of goods. The buyer
undertakes to verify the number of items and their integrity in debate
of failure of payment due to any reason. The property of goods
supplied by LINK Srl shall not pass to the buyer until the agreed price,
including possible freight charges and taxes, are completely paid. In
case of
both total or partial payment failure, LINK Srl will
immediately resume the ownership of the goods, leaving unprejudiced
all other legal and contractual consequences of arrearage.
with either its carrier or its forwarding agent. Any theft, loss or
damage to the goods in transit must be notified and claimed to them
GENERAL CONDITIONS
upon receipt of goods. LINK Srl may offer transportation on the
The placing of orders to LINK Srl imply the knowledge and full
buyer’s behalf at rates to be agreed upon prior to shipment. In the
acceptance of the above mentioned conditions of sale by the buyer.
event of any theft, loss or damage in such cases, a note must be made
Any issue which is not mentioned in these Terms of Sale will be ruled
in writing on the transport document upon delivery and to LINK Srl
by the current talian law.
immediately, otherwise no reimbursement can be claimed by the
buyer.
LEGAL CONSTRUCTION
All contracts concluded with LINK Srl shall be governed by the Italian
RETURN OF GOODS
law. LINK Srl elects the Court of Rome as governing Forum in case of
No returned goods can be accepted without prior authorization by
controversies.
LINK Srl. Once authorized, as defective goods or not in conformity
with the order, they will be returned to LINK Srl carriage free,
24
Link www.linkitaly.com
Grafica: DonatellaFerrucci · studiografismi@tin.it