Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > BA/BB Series
BA/BB Varistor Series
RoHS
Description
BB Series
The BA and BB Series transient surge suppressors are
heavy-duty industrial Metal-Oxide Varistors (MOVs)
designed to provide surge protection for motor
controls and power supplies used in oil-drilling, mining,
transportation equipment and other heavy industrial AC line
applications.
BA Series
Agency Approvals
Agency
Agency Approval
Agency File Number
UL1449
E320116 - for BA Series only.
Additional Information
These varistors have similar package construction but differ
in size and ratings. The BA models are rated from 130 to
880VM(AC). The BB models from 1100 to 2800VM(AC).
Both the BA and BB Series feature improved creep and
strike capability to minimize breakdown along the package
surface, a package design that provides complete electrical
isolation of the disc subassembly, and rigid terminals to
ensure secure wire contacts.
See BA/BB Series Device Ratings and Specifications Table
for part number and brand information.
Features
•
High energy absorption
capability WTM
•
Case design provides
complete electrical
isolation of disc
subassembly
•
Littelfuse largest
packaged disc
60mm diameter
•
No derating up to
85ºC ambient
•
RoHS compliant
BA Series 3200J
Datasheet
BA
Resources
BA
Samples
BA
BB Series 10,000J
•
Wide operating voltage
range VM(AC)RMS
BA Series 130V to 880V
Datasheet
BB
BB Series 1100V to 2800V
Resources
BB
Samples
BB
•
Rigid terminals for
secure wire contact
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS)
DC Voltage Range (VM(DC))
BA Series
BB Series
Units
130 to 880
1100 to 2800
V
175 to 1150
1400 to 3500
V
50,000 to 70,000
70,000
A
450 to 3200
-55 to +85
-55 to +125
<0.01
3800 to 10000
-55 to +85
-55 to +125
<0.01
J
C
O
C
%/OC
5000
5000
V
1000
1000
MΩ
Transients:
Peak Pulse Current (ITM)
For 8/20µs Current Wave (See Figure 2)
Single Pulse Energy Range
For 2ms Current Squarewave (WTM)
Operating Ambient Temperature Range (TA)
Storage Temperature Range (TSTG)
Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
(Dielectric must withstand indicated DC voltage for one minute per MIL–STD–202, Method 301)
COATING Insulation Resistance
O
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or
any other conditions above those indicated in the operational sections of this specification is not implied.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > BA/BB Series
BA/BB Series Ratings & Specifications
Maximum Rating (85°C)
Continuous
Part
Number
BA Series
V131BA60
V151BA60
V251BA60
Specifications (25°C)
Transient
Varistor Voltage at 1mA
DC Test Current
Maximum
Clamping Volt
VC at 200A
Current (8/20µs)
Typical
Capacitance f =
1MHz
VRMS
VDC
Energy
(2ms)
Peak
Current
8 x 20µs
VM(AC)
VM(DC)
WTM
ITM
Min
VN(DC)
Max
VC
C
(V)
(V)
(J)
(A)
(V)
(V)
(V)
(V)
(pF)
130
150
250
175
200
330
450
530
880
50000
50000
50000
184.5
216
351
205
240
390
225.5
264
429
340
400
620
20000
16000
10000
V271BA60
275
369
950
50000
387
430
473
680
9000
V321BA60
V421BA60
V481BA60
V511BA60
V571BA60
V661BA60
V751BA60
V881BA60
320
420
480
510
575
660
750
880
420
560
640
675
730
850
970
1150
1100
1500
1600
1800
2100
2300
2600
3200
50000
70000
70000
70000
70000
70000
70000
70000
459
612
675
738
819
945
1080
1350
510
680
750
820
910
1050
1200
1500
561
748
825
902
1001
1155
1320
1650
760
1060
1160
1300
1420
1640
1880
2340
7500
6000
5500
5000
4500
4000
3500
2700
BB Series
V112BB60
V142BB60
V172BB60
V202BB60
V242BB60
V282BB60
1100
1400
1700
2000
2400
2800
1400
1750
2150
2500
3000
3500
3800
5000
6000
7500
8600
10000
70000
70000
70000
70000
70000
70000
1665
2070
2500
2970
3510
4230
1850
2300
2765
3300
3900
4700
2035
2530
3030
3630
4290
5170
2940
3600
4300
5200
6200
7400
2200
1800
1500
1200
1000
800
NOTE: Average power dissipation of transients not to exceed 2.5W. See Figures 3 and 4 for more information on power dissipation.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > BA/BB Series
Peak Pulse Current Test Waveform
PERCENT OF PEAK VALUE
Power Dissipation Ratings
PERCENT OF RATED VALUE
100
90
80
70
60
50
40
30
20
50
60
70
80
90
100
110
120
130
50
Should transients occur in rapid succession, the average power
dissipation required is simply the energy (watt-seconds) per pulse
times the number of pulses per second. The power so developed
must be within the specifications shown on the Device Ratings
and Characteristics Table for the specific device. Furthermore,
the operating values need to be derated at high temperatures as
shown in the above diagram. Because varistors can only dissipate
a relatively small amount of average power they are, therefore, not
suitable for repetitive applications that involve substantial amounts
of average power dissipation.
Stand by Power Dissipation vs Applied VRms at Varied
Temperatures
Typical Stability of Standby Power Dissipation at Rated
VRMS vs Time
0.5
POWER DISSIPATION (W) PER kV
OF RATED V RMS
POWER DISSIPATION (W) PER kV
OF RATED V RMS
1,000 HOURS, TA = 85oC
0.6
0.4
MAX AT TA = 25oC
0.1
0.08
TYP AT TA = 25oC
0.06
0.04
80
T2
01 = Virtual Origin of Wave
T = Time from 10% to 90% of Peak
T1 = Rise Time = 1.25 x T
T2 = Decay Time
Example - For an 8/20 µs Current Waveform:
8µs = T1 = Rise Time
20µs = T2 = Decay Time
MAX AT TA = 85oC
0.2
TIME
FIGURE 2. PEAK PULSE CURRENT TE
TYPICAL TEMPERATURE COEFFICIENT
OF POWER DISSIPATION = 2.2%/ oC
1.0
0.8
T
T1
Figure 2
FIGURE 1. CURRENT, ENERGY AND POWER DERATING
CURVE
Example: For
8 s = T1 = V
20 s = T 2 = V
10
140 150
AMBIENT TEMPERATURE ( oC)
Figure 1
O1 = Virtua
T = Time
T 1 = Virtua
T 2 = Virtua
90
O1
10
0
-55
100
90
100
110
FIGURE 3. STANDBY POWER DISSIPATION vs APPLIED
VRMS AT VARIED TEMPERATURES
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
0.3
0.2
0.1
0
PERCENTAGE OF MAXIMUM RATED V RMS (%)
Figure 3
0.4
Figure 4
0
10
100
TIME AT RATED V RMS (HOURS)
FIGURE 4. TYPICAL STABILITY OF STANDBY POWER
DISSIPATION AT RATED V RMS vs TIME
1,000
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > BA/BB Series
Maximum Clamping Voltage BA Series
Maximum Clamping Voltage BB Series
V131BA60 - V881BA60
30,000
MAX CLAMPING VOLTAGE
DISC SIZE 60mm
130 TO 880VM(AC) RATING
TA = -55oC TO 85oC
3,000
V511BA60
V481BA60
V421BA60
V881BA60
V751BA60
V661BA60
V571BA60
1,000
900
800
700
600 V321BA60
500 V271BA60
V251BA60
V112BB60
10 -1
10 0
Figure 5
10 1
10 2
10 3
PEAK AMPERES (A)
10 4
10 3
1,000
10 4
DISC SIZE 60mm
V131BA60 - V321BA60
20,000
10 5
10 6
5,000
10 2
2,000
10 3
1,000
10 4
500
10 5
200
10 6
100
50
50
20
10 5
2
10
10,000
200
100
10 4
DISC SIZE 60mm
V421BA60 - V282BB60
1
50,000
SURGE CURRENT (A)
SURGE CURRENT (A)
2
10
2,000
10 3
FIGURE 6. CLAMPING VOLTAGE FOR V112BB60 - V282BB60
100,000
5,000
10 1
10 2
PEAK AMPERES (A)
V421BA60 - V282BB60
1
10 2
10 0
Repetitive Surge Capability BB Series
V131BA60 - V321BA60
50,000
10 -1
Figure 6
Repetitive Surge Capability BA Series
500
2,000
10 -2
10 5
FIGURE 5. CLAMPING VOLTAGE FOR V131BA60 - V881BA60
10,000
V282BB60
5,000 V242BB60
4,000 V202BB60
3,000 V142BB60
300 V151BA60
V131BA60
20,000
10,000
9,000
8,000
7,000
6,000
V172BB60
400
200
10 -2
MAX CLAMPING VOLTAGE
DISC SIZE 60mm
1100 TO 2800VM(AC) RATING
TA = -55oC TO 85oC
20,000
MAX PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
6,000
5,000
4,000
2,000
V112BB60 - V282BB60
INDEFINITE
10
20
Figure 7
20
INDEFINITE
10
100
1,000
IMPULSE DURATION (μs)
20
10,000
FIGURE 7. SURGE CURRENT RATING CURVES FOR
100
Figure 8
1,000
10,000
IMPULSE DURATION ( μs)
FIGURE 8. SURGE CURRENT RATING CURVES FOR
V421BA60 - V282BB60
NOTE: If pulse ratings areV131BA60
exceeded, a- V321BA60
shift of VN(DC) (at specified current) of more than +/-10% could result.This type of shift, which normally results in a decrease of VN(DC), may result in
the device not meeting the original published specifications, but it does not prevent the device from continuing to function, and to provide ample protection.
Physical Specifications
Environmental Specifications
Lead Material
BA / BB – Copper with Tin Plating
Operating Temperature
-55°C to +85°C
Insulating Material
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements.
Storage Temperature
-55°C to +125°C
Device Labeling
Marked with LF, Part Number and Date
code
Humidity Aging
+85°C, 85% RH, 1000 hours
+/- 5% typical resistance change
Thermal Shock
+85°C to -40°C 10 times
+/- 5% typical resistance change
Solvent Resistance
MIL–STD–202, Method 215
Moisture Sensitivity
Level 1, J-STD-020
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
BB Series
Metal-Oxide Varistors (MOVs)
40.0 (1.575)
M6 INTERNATIONAL THREAD
PAN HEAD SLOTTED SCREW
Industrial High Energy Terminal Varistors > BA/BB Series
10.5
(0.41)
44.5
(1.752)
7.0
(0.28)
10.5
(0.41)
86.0 (3.38)
100 (3.94)
Dimensions
40±2
(1.575 ± 0.08)
BA Series
M6 INTERNATIONAL
THREAD
40.0 (1.575)
M6 INTERNATIONAL THREAD
PAN HEAD SLOTTED SCREW
23.5
(0.925)
7.0
(0.28)
86.0 (3.38)
95 (3.74)
MAX
100 (3.94)
79±3
(3.11±0.12)
BB Series
40.0 (1.575)
6 (0.24)
M6 INTERNATIONAL THREAD
PAN HEAD SLOTTED SCREW
10.5
(0.41)
86±2
(3.38±0.08)
100 (3.94)
44.5
(1.752)
7.0
(0.28)
Notes:
Typical weight: BA Series:250g and BB Series: 600g
Dimensions are in mm; inches in parentheses for reference only.
10.5
(0.41)
86.0 (3.38)
100 (3.94)
40±2
(1.575 ± 0.08)
Part Numbering System
M6 INTERNATIONAL
THREAD
V XX X BA 60
VARISTOR
DISC SIZE (60mm)
VM(AC)
SERIES DESIGNATOR
First Two Significant Digits*
95 (3.74)
MAX
79±3
(3.11±0.12)
BA or BB
VM(AC)
Decade Multiplier*
(1 or 2)
*Refer to Rating & Specifications table
Examples:
130 VM(AC) = 131
2800 VM(AC) = 282
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
6 (0.24)
86±2
(3.38±0.08)
100 (3.94)