SIDACtor ® Protection Thyristors
Baseband Protection (Voice-DS1)
SIDACtor® Series - Modified TO-220
Description
The SIDACtor® Series Modified TO-220 are designed to
protect baseband equipment from damaging overvoltage
transients.
The series provides a robust single port through-hole
solution that enables voice though DS-1 equipment to
comply with various global regulatory standards.
Features and Benefits
t Low voltage overshoot
t Fails short circuit when
surged in excess of
ratings
t Low on-state voltage
Agency Approvals
t Does not degrade with
use
Agency
t Modified TO-220 Package
Agency File Number
t Single-port protection
t Lead forms available
E133083
Applicable Global Standards
Pinout Designation
t5*""
t(3*OUSBCVJMEJOH
t5*"#
t*&$
t*56,&OIBODFE
Level*
t:%5
t:%5
t*56,#BTJD-FWFM
PIN 1
PIN 3
t:%5
t(3*OUFSCVJMEJOH
PIN 2
*A/B-rated parts require series resistance
Schematic Symbol
1
(T)
3
2
(G)
(R)
Electrical Characteristics
VDRM
VS
VDRM
VS
@lDRM=5μA @100V/μs @lDRM=5μA @100V/μs
Part Number
Marking
V min
V max
V min
Pins 1-2, 3-2
P0602AALxx
P1402AALxx
P1602AALxx
P2202AALxx
P2702AALxx
P3002AALxx
P3602AALxx
P4202AALxx
P4802AALxx
P6002AALxx
P0602AA
P1402AA
P1602AA
P2202AA
P2702AA
P3002AA
P3602AA
P4202AA
P4802AA
P6002AA
25
58
65
90
120
140
170
190
220
275
40
77
95
130
160
180
220
250
300
350
V max
Pins 1-3
50
116
130
180
240
280
340
380
440
550
80
154
190
260
320
360
440
500
600
700
VT
@IT=2.2 A
IS
Pins 1-2, 3-2
mA
min
mA
max
A
pF min pf max
max
4
4
4
4
4
4
4
4
4
4
50
150
150
150
150
150
150
150
150
150
800
800
800
800
800
800
800
800
800
800
2.2
2.2
2.2
2.2
2.2 See Capacitance
Values Table
2.2
2.2
2.2
2.2
2.2
V max
IT
Capacitance
IH
@1MHz, 2V bias
Table continues on next page.
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
166
Revised: February 22, 2011
SIDACtor ® Protection Thyristors
Baseband Protection (Voice-DS1)
Electrical Characteristics (continued)
Part Number
Marking
P0602ABLxx
P1402ABLxx
P1602ABLxx
P2202ABLxx
P2702ABLxx
P3002ABLxx
P3602ABLxx
P4202ABLxx
P4802ABLxx
P6002ABLxx
P0602ACLxx
P1402ACLxx
P1602ACLxx
P2202ACLxx
P2702ACLxx
P3002ACLxx
P3602ACLxx
P4202ACLxx
P4802ACLxx
P6002ACLxx
P0602AB
P1402AB
P1602AB
P2202AB
P2702AB
P3002AB
P3602AB
P4202AB
P4802AB
P6002AB
P0602AC
P1402AC
P1602AC
P2202AC
P2702AC
P3002AC
P3602AC
P4202AC
P4802AC
P6002AC
VDRM
VS
VDRM
VS
@lDRM=5μA @100V/μs @lDRM=5μA @100V/μs
V min
V max
V min
Pins 1-2, 3-2
25
58
65
90
120
140
170
190
220
275
25
58
65
90
120
140
170
190
220
275
40
77
95
130
160
180
220
250
300
350
40
77
95
130
160
180
220
250
300
350
V max
Pins 1-3
50
116
130
180
240
280
340
380
440
550
50
116
130
180
240
280
340
380
440
550
80
154
190
260
320
360
440
500
600
700
80
154
190
260
320
360
440
500
600
700
VT
@IT=2.2 A
IH
IS
IT
Pins 1-2, 3-2
mA
min
mA
max
A
max
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
50
150
150
150
150
150
150
150
150
150
50
150
150
150
150
150
150
150
150
150
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
V max
Capacitance
See
Capacitance
Values Table
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional (unless otherwise noted).
- XX Part Number Suffix: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form bulk pack)
Capacitance Values
Part Number
P0602AALxx
P1402AALxx
P1602AALxx
P2202AALxx
P2702AALxx
P3002AALxx
P3602AALxx
P4202AALxx
P4802AALxx
P6002AALxx
P0602ABLxx
P1402ABLxx
P1602ABLxx
P2202ABLxx
P2702ABLxx
P3002ABLxx
P3602ABLxx
P4202ABLxx
P4802ABLxx
P6002ABLxx
pF
Pin 1-2, 3-2
Tip-Ground, Ring-Ground
MIN
MAX
15
145
40
60
35
60
30
50
25
45
25
40
25
35
25
35
20
35
20
35
15
250
40
155
35
145
30
115
25
105
25
95
25
90
25
85
20
85
20
80
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
pF
Pin 1-3
Tip-Ring
MIN
MAX
10
90
20
35
20
35
15
30
15
25
15
25
10
20
10
20
10
20
10
20
10
145
20
90
20
85
15
65
15
60
15
55
10
50
10
50
10
50
10
45
Part Number
P0602ACLxx
P1402ACLxx
P1602ACLxx
P2202ACLxx
P2702ACLxx
P3002ACLxx
P3602ACLxx
P4202ACLxx
P4802ACLxx
P6002ACLxx
pF
Pin 1-2, 3-2
Tip-Ground, Ring-Ground
pF
Pin 1-3
Tip-Ring
MIN
MAX
MIN
MAX
25
55
45
45
40
35
35
30
30
30
250
155
145
115
105
95
90
85
85
80
10
30
25
25
20
20
15
15
15
15
145
90
85
65
60
55
50
50
50
45
Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
167
Revised: February 22, 2011
SIDACtor ® Protection Thyristors
Baseband Protection (Voice-DS1)
Surge Ratings
Series
IPP
ITSM
50/60 Hz
di/dt
A min
A min
A/μs max
75
100
200
20
25
50
500
500
500
0.2x310
0.5x700 2
2x10
2x10 2
8x20
1.2x50 2
10x160
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min
A min
A min
A min
A min
A min
A min
A min
20
25
50
150
250
500
150
250
400
90
150
200
50
100
150
75
100
200
75
125
175
45
80
100
1
A
B
C
1
1
1
Notes:
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$
- The device must initially be in thermal equilibrium with -40°C < TJ <¡$
1 Current waveform in μs
2 Voltage waveform in μs
Thermal Considerations
Package
Symbol
Modified
TO-220
PIN 1
Value
Unit
TJ
Operating Junction Temperature Range
UP
°C
TS
Storage Temperature Range
UP
°C
60
°C/W
R0JA
PIN 3
PIN 2
Parameter
Thermal Resistance: Junction to Ambient
V-I Characteristics
tr x td Pulse Waveform
IPP – Peak Pulse Current – %IPP
+I
IT
IS
IH
IDRM
-V
+V
VT
VDRM
VS
tr = rise time to peak value
td = decay time to half value
Peak
Value
100
Waveform = tr x td
50
Half Value
0
0
td
tr
t – Time (μs)
-I
Normalized DC Holding Current vs. Case Temperature
10
IH
8
6
25 °C
4
2
IH (TC = 25ºC)
2.0
14
12
Ratio of
Percent of VS Change – %
Normalized VS Change vs. Junction Temperature
0
-4
-6
-8
1.8
1.6
1.4
25°C
1.2
1.0
0.8
0.6
0.4
-40 -20
0
20 40 60 80 100 120 140 160
-40
Junction Temperature (TJ) – °C
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
-20
0
20
40
60
80
100 120 140 160
Case Temperature (TC) - ºC
168
Revised: February 22, 2011
SIDACtor ® Protection Thyristors
Baseband Protection (Voice-DS1)
Soldering Parameters
Pb-Free assembly
(see Fig. 1)
¡$
¡$
60-180 secs.
- Temperature Min (Ts(min))
Pre Heat
- Temperature Max (Ts(max))
- Time (Min to Max) (ts)
Average ramp up rate (Liquidus Temp (TL)
to peak)
3°C/sec. Max.
TS(max) to TL - Ramp-up Rate
3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus)
¡$
- Temperature (tL)
60-150 secs.
Peak Temp (TP)
¡$
Time within 5°C of actual Peak Temp (tp)
30 secs. Max.
Ramp-down Rate
6°C/sec. Max.
Time 25°C to Peak Temp (TP)
8 min. Max.
Do not exceed
¡$
Figure 1
TP
tP
Critical Zone
TL to TP
Ramp-up
Temperature
Reflow Condition
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
tS
25
time to peak temperature
(t 25ºC to peak)
Time
Physical Specifications
Environmental Specifications
Lead Material
Copper Alloy
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ¡$PS¡$
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Terminal Finish
100% Matte-Tin Plated
Temp Cycling
¡$UP¡$NJOEXFMMVQUP
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC¡$
3)VQUPIST&*"
JEDEC, JESD22-A-101
High Temp Storage
¡$IST.*-45%.FUIPE
JEDEC, JESD22-A-101
Low Temp Storage
-65°C, 1008 hrs.
Thermal Shock
¡$UP¡$NJOEXFMMTFDUSBOTGFS
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
¡$3)BUNVQUPIST&*"
JEDEC, JESD22-A-102
Resistance to Solder
Heat
¡$TFDT.*-45%.FUIPE
Moisture Sensitivity
Level
3)¡$ISTSFnPXDZDMFT
¡$1FBL
+&%&$+45%-FWFM
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Part Numbering
Part Marking
P xxx 2 A x L xx
TYPE
P = SIDACtor
MEDIAN VOLTAGE
CONSTRUCTION
VARIABLE
PACKAGE TYPE
XXXXXXXXX
Blank: Bulk
RP: Reel Pack
60: Type 60 Lead Form
(Special order item.
For type 60 orders,
contact factory)
xxxxx
RoHS COMPLIANT
IPP RATING
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Part Marking Code
(Refer to Electrical Characteristics Table)
PACKING OPTIONS
169
Revised: February 22, 2011
Date Code
SIDACtor ® Protection Thyristors
Baseband Protection (Voice-DS1)
Dimensions - Modified TO-220
A
Inches
O
D
Temperature
Measurement
Point
F
G
Tape and Reel Specification — Modified TO-220
P
PIN 3
PIN 2
PIN 1
L
M
K
H
N
J
The modified TO-220 package is designed to
meet mechanical standards as set forth in
JEDEC publication number 95.
Millimeters
Min
Max
Min
A
0.400
0.410
10.16 10.42
D
0.360
0.375
9.14
9.53
F
0.110
0.130
2.80
3.30
G
0.540
0.575
13.71 14.61
H
0.025
0.035
0.63
0.240
(6.10)
Max
0.019
(0.5)
1.626
(41.15)
0.750 ± 0.010
(19.05 ± 0.25)
0.720
(18.29)
0.360
(9.14)
J
0.195
0.205
4.95
5.21
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.90
M
0.070
0.085
1.78
2.16
N
O
P
0.018
0.024
0.46
0.61
0.178
0.290
0.188
0.310
4.52
7.37
4.78
7.87
A
Direction of Feed
1.968
(50.0)
Description
Quantity
Added Suffix
Industry
Standard
Modified TO-220
Tape and Reel Pack
700
RP
EIA-468-B
Modified TO-220
Bulk Pack
500
N/A
N/A
Modified TO-220
Type 60 Lead Form
Bulk Pack
500
60
(special order item,
contact factory for details)
N/A
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
0.100
(2.54)
Dimensions are in inches
(and millimeters).
Packing Options
Package
Type
0.100
(2.54)
14.173 (360.0)
0.89
K
0.500
(12.7)
170
Revised: February 22, 2011