BOURNS Thyristor Surge Protectors
BOURNS TISP THYRISTOR OVERVOLTAGE PROTECTORS
Thyristors
DIMENSIONS: mm (in.)
Continuing to provide the most complete solutions to your circuit protection needs, Bourns recently introduced the TISP® line of products.
The TISP® products are specially designed to provide protection for telecommunications equipment in instances where high voltages
occur as a result of lightning strikes, power line crosses or a/c power surges. Coupled with Bourns’ Mulifuse® PPTC overcurrent protectors
and Bourns, Line Protection Networks, the TISP® products offer telecom customers a more comprehensive total protection product line.
A
Bidirectional Thyristor Surge Protector
This TISP® device series protects central office, access and customer premise equipment against overvoltages on the telecom line.
These devices are housed in a through-hole DO-92 package (TO-92 package with cropped center leg).
For quantities greater than listed, call for quote.
Vdrm(V)
Fig. Standoff
Voltage
Mouser stock no.
Mfr.
Mfr. Part No.
A
A
A
A
Delta
Capacitance
15
20
25
35
2
3
3
2
8
12
16
24
Price Each
Ratings for Lighting Surge Standards
IEC 61000-4-5
8/20 µs(A)
30
30
30
30
GR-1089-CORE
10/1000 µs(A)
18
18
18
18
1
50
100
500
.46
.46
.46
.46
.36
.36
.36
.36
.34
.34
.34
.34
.30
.30
.30
.30
(Tip)
1
NU
2
(Ring)
3
Small-outline Packages
This small-outline package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The
compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable
when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly.
5
(Tip)
4
(Ring)
Bourns
652-TISP4P015L1NR-S
652-TISP4P020L1NR-S
652-TISP4P025L1NR-S
652-TISP4P035L1NR-S
Vbo(V)
Protect
Voltage
Quad-Forward-Conducting Buffered P-Gate Thyristor
Independent Overvoltage Protection for Two SLICs in Short Loop Applications:
• Wide 0V to -90V Programming Range
• Low 5mA max. Gate Triggering Current
• High 150mA min. (85°C) Holding Current
Mouser stock no.
Mfr.
Mfr. Part No.
• Specified 1.2/50 and 0.5/700 Limiting Voltage
• Full -40°C to 85°C Temperature Range
Fig.
Protect.
Voltage
V(BO) (V)
B
B
B
B
B
0 to -75
0 to-64
0 to-150
0 to -90
0 to +90
652-TISP61089DR-S
652-TISP61089QDR-S
652-TISP6NTP2CDR-S
652-TISP8200MDR-S
652-TISP8201MDR-S
NPL
B
For quantities greater than listed, call for quote.
IPPSM Ratings for Lighting Surge Standards
GR-1089ANSI
ITU-T
GR-1089CORE
C62.41
K.20/21
CORE
2/10 µs (A)
8/20 µs (A)
5/310 µs (A) 10/1000 µs (A)
120
No Value
40
30
120
No Value
40
30
90
No Value
40
25
210
No Value
70
45
210
No Value
70
45
Price Each
1
50
1.55 .86
.89 .84
2.04 1.22
1.44 1.15
1.44 1.15
100
500
.74
.80
1.03
1.05
1.05
.65
.74
.90
.88
.88
3.81 - 4.00
(0.150 - 0.157)
4.80 - 5.00
(0.189 - 0.197)
1.35 - 1.75
(0.053 - 0.069)
Dual Forward-Conducting P-Gate and N-Gate Thyristor Programmable Overvoltage Protectors
This is a dual forward-conducting buffered p-gate thyristor (SCR) overvoltage protector. It is designed to protect monolithic SLICs
(Subscriber Line Interface Circuits) against overvoltages on the telephone line caused by lightning, a/c power contact and induction.
The TISP61089B limits voltages that exceed the SLIC supply rail voltage. The TISP61089B parameters are specified to allow
equipment compliance with Bell core GR-1089-CORE, Issue 2 and ITU-T recommendations K.20, K.21 and K.45.
For quantities greater than listed, call for quote.
Mouser stock no.
Mfr.
Mfr. Part No.
652-TISP61089ADR-S
652-TISP61089BDR-S
652-TISP61089HDMR-S
652-TISP61089QBDR-S
652-TISP8200HDMR-S
652-TISP8201HDMR-S
Fig.
Protect.
Voltage
V(BO) (V)
B
B
B
B
B
B
0 to -120
0 to -170
0 to -170
-20 to -155
0 to -70
0 to 70
IPPSM Ratings for Lighting Surge Standards
GR-1089ANSI
ITU-T
GR-1089CORE
C62.41
K.20/21
CORE
2/10 µs (A)
8/20 µs (A)
5/310 µs (A) 10/1000 µs (A)
120
--40
30
120
--40
30
--150
100
--120
--40
30
500
--150
100
500
--150
100
Price Each
1
50
1.55 .86
1.55 .86
3.45 2.07
1.55 .85
4.60 4.03
4.60 4.03
100
500
.74
.74
1.87
.73
3.74
3.74
.65
.65
1.66
.65
3.45
3.45
Very Low Voltage Bidirectional Thyristor Overvoltage Protectors
Mouser stock no.
Mfr.
Standoff
Fig. Voltage
V(BO) (V)
Mfr. Part No.
652-TISP4015H1BJR-S
652-TISP4040H1BJR-S
C1
C1
8
25
Protect.
Voltage
V(BO) (V)
Holding
Current
IH(mA)
15
40
50
50
IPPSM Ratings for Lighting Surge Standards
GR-1089- TIA/EIAITU-T GR-1089CORE
IS-968
K.20/21
CORE
2/10 µs 10/560 µs 5/310 µs 10/1000
(A)
(A)
(A)
µs (A)
500
125
150
100
500
125
150
100
Forward-Conducting Unidirectional Thyristor Overvoltage Protectors
Mouser stock no.
Mfr.
Standoff
Fig. Voltage
V(BO) (V)
Mfr. Part No.
652-TISP5070H3BJR-S
652-TISP5080H3BJR-S
C2
C2
-58
-65
Protect.
Voltage
V(BO) (V)
-70
-80
For quantities greater than listed, call for quote.
50
100
500
.46
.46
.36
.36
.34
.34
.30
.30
GR-1089- ANSI
TIA/EIAITU-T GR-1089CORE C62.41
IS-968
K.20/21
CORE
2/10 µs 8/20 µs 10/560 µs 5/310 µs 10/1000
(A)
(A)
(A)
(A)
µs (A)
500
300
160
200
100
500
300
160
200
100
Mfr.
Standoff
Fig. Voltage
V(BO) (V)
Mfr. Part No.
652-TISP4125H3BJR-S
652-TISP4145M3BJR-S
652-TISP4C115H3BJR-S
652-TISP4C290H3BJR-S
652-TISP4C350H3BJR-S
© Copyright 2012 Mouser Electronics
C1
C1
C1
C1
C1
100
120
90
220
275
Protect.
Voltage
V(BO) (V)
125
145
115
150
150
G3,G4
3
6
A
K3
4
5
K4
C
3.30 - 3.94
(.130 - .155)
4.06 - 4.57
(.160 - .180)
2.00 - 2.40
(.079 - .094)
1
50
100
500
.58
.58
.45
.45
.43
.43
.39
.39
2.54
(.100)
2.40
(.095)
2.16
(.085)
NPL
IPPSM Ratings for Lighting Surge Standards
Holding
GR-1089- TIA/EIAITU-T
GR-1089Current
CORE
IS-968
K.20/21
CORE
IH(mA)
2/10 µs 10/560 µs 5/310 µs 10/1000
(A)
(A)
(A)
µs (A)
150
500
160
200
100
150
300
100
100
50
150
500
100
150
100
150
500
100
150
100
150
500
100
150
100
mouser.com/bourns
A
Price Each
For quantities greater than listed, call for quote.
Mouser stock no.
K2
7
For quantities greater than listed, call for quote.
IPPSM Ratings for Lighting Surge Standards
Bidirectional Thyristor Overvoltage Protectors
8
2
A. Leads are within 0.25 (0.010) radius of true position
at maximum material condition.
B. Body dimensions do not include mold flash or
protrusion.
C. Mold flash or protrusion shall not exceed 0.15 (0.006).
D. Lead tips to be planar within ±0.051 (0.002).
Price Each
1
1
NOTES:
Surface Mount Packages
This surface mount package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The
compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable
when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly.
K1
G1,G2
Price Each
1
50
100
500
.58
.66
.98
.98
.98
.45
.50
.50
.50
.50
.43
.44
.44
.44
.44
.39
.37
.37
.37
.37
Pad
2
1
R(B) 1
2 T(A)
Top View
(800) 346-6873
1
2
Top View
© Copyright 2012 Mouser Electronics
651