Overview
LATILUBE High-Pressure,
High-Temperature Lubricant
Improve horizontal drilling rates by reducing torque and drag
The Baker Hughes LATILUBE™ highpressure, high-temperature (HP/HT)
lubricant reduces friction, which causes
torque and drag; thereby, improving
sliding efficiency and rate of penetration
(ROP) in directional and extended-reach
wells. Exceptionally versatile, this lubricant
can withstand temperatures as high as
400°F (204.4°C) and remains stable in
calcium-based muds or other extremely
high-pH fluids.
Environmental information
For information concerning environmental
regulations applicable to this product,
contact the Health, Safety, and
Environmental department of
Baker Hughes.
Safe handling recommendations
Take normal precautions when handling,
and wear appropriate personal protective
equipment. See the material safety data
sheet before use.
Recommended treatment
For optimum performance, the LATILUBE
HP/HT lubricant should be used in waterbased fluids at an initial concentration
of 2 to 4 percent by volume. Greater
dosages and subsequent maintenance
requirements will be dictated by specific
well conditions and fluid dilution. Contact
your Baker Hughes representative for
additional information.
Packaging
LATILUBE HP/HT lubricant is packaged
in 55-gal. drums.
„„The
Baker Hughes LATIDRILL™ system
„„Freshwater and low salinity
water-based systems
„„HP/HT wells
„„Horizontal, deviated, and
extended-reach wells
Features and Benefits
„„Enhances
lubricity and reduces torque
and drag without affecting mud
properties
–– Increases drilling efficiency
–– Decreases nonproductive time
–– Eases friction associated with
Shipping
Transportation is not restricted by
international or USA regulatory agencies.
running casing
–– Improves cuttings management,
weight-on-bit, and directional
control
„„Stable
Typical Physical Properties
in high-pH fluid systems,
including lime-treated muds
–– Remains stable in a broad range
of water-based muds
Appearance
Dark brown liquid
Specific gravity
68°F (20°C)
1.07 – 1.09
little or no foam at
high temperatures
Temperature range
Up to 400°F (204.4°)
to entrained oxygen
www.bakerhughes.com
Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do
not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including
those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is”
and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
© 2012 Baker Hughes Incorporated. All rights reserved. 34975
Applications
„„Creates
–– Reduces risk of corrosion due