NEW!
Companies and organizations in need of outdoor pedestrian-level signage can look no further than our
high-quality, expertly engineered banner display system. It’s a
great choice for entrances and exits, drive‐through lanes and
other exterior locations. Our system is engineered for durability and dependability with one job in mind: To put
your message in front of people and keep it there. The
banner and stand may be ordered together or separately.
The banner’s scrim backing provides superior strength and
durability. The front-lit banner material is compatible with latex,
solvent and UV inks. Its 1000 x 1000 high-tenacity polyester yarn
gives it strength and superior print quality, making it the preferred
banner material among industry-leading printing facilities.
The banner stand is permanently installed outdoors, and banners can be easily changed. Constructed of 100 percent
aluminum with a powder coat finish available in custom colors, it’s available to hold banners of multiple widths from
16” to 24” and a standard height of 72”. The banner stand
is ideal for drive‐through bank islands, parks, zoos, special exterior retail signage or wherever permanent pedestrian
level signage is desired.
•
•
•
•
•
•
•
100% aluminum construction
Spring-loaded banner tension
Permanent mount
Easily changed graphics
Tamper-proof fasteners
Exterior powder coat finish
Made in the USA
open
72” tall banner
48” tall banner
The ground-mounted system is engineered to display banners in exterior locations at ground level.
It can be bolted to concrete, wood or other suitable material. Custom sizes are available and subject to
minimum order.
Standard Banner Size: 16” to 24” width x 72” or 48“ (same unit
accommodates both banner sizes); banners may be printed on two
sides. 2” hems recommended at top and bottom of banners. No
intermediate support necessary.
•
•
•
•
Powder coated aluminum construction
Stainless steel, hex head fasteners
Vertical adjustment available for banner height (+/- 1/2”)
Aluminum base has 7/16” holes for bolting to concrete or
other surface (stainless steel anchor bolts, washers and
lead anchors included)
• Custom widths available
• Full size mounting instructions and template included
Finish: Aluminum stand is available in powder coated
Medium Gray and Black (Brown available by special order)
Unit Configuration & Size: 77 ¼” high - width of banner from
16” to 24” depending on how base is permanently mounted.
Weight: MG2-2072B - Black 15 lbs
MG2-2072G - Gray 15 lbs
Shipping weight: 21 lbs
Shipping weight: 21 lbs
Packing: Complete unit is shipped in one box and can ship
standard ground. Bulk shipping on pallets is available. Size of
box 80”x 18”x 7”.
Warranty: Two- year limited warranty against defects in
material and workmanship under normal wear and
atmospheric conditions. Unit is warranted to withstand
60 mph wind velocity when installed according to
manufacturer’s instructions. Unit is not warranted against
flying debris, other moving objects or misuse.
For orders or more information, contact us:
info@jpsiteexperts.com
262-346-8451
JPSiteExperts.com
0915