1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 1 WE ENGINEERED THE WATER OUT BY ENGINEERING THE QUALITY IN RAINTIGHT FITTINGS OTHER RAINTIGHT PRODUCTS CORD GRIP SOLUTIONS ® NEC REQUIREMENTS The National Electrical Code® (NEC) provides requirements and recommendations that govern this country’s wiring practices and Raintight in all the sizes and configurations you need electrical installations. NEC articles and sections that detail the Whatever the size and whatever the configuration, Complete solutions in zinc, steel and aluminum use of conduit and cable products in a wet location are listed below. Consult Bridgeport Catalog NEC Articles NFPA 70®, National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Quincy, MA. Bridgeport has the raintight solution. You can get Bridgeport innovations for cable, EMT and rigid conduit, with more choices in 1/2” to 4” trade sizes. Our separate sealing 358.42 Couplings and Connectors used with EMT shall be made up rings ensure a raintight seal and split-type compression tight. Where buried in masonry or concrete, they shall be concretetight rings make for fast, reliable installation. With Bridgeport type. They shall be listed for use in wet locations and comply with UL-Listed raintight fittings, you can meet any code Article 314.15. and fill any specification. Bridgeport quality shines on even the rainiest days. 344.42 Couplings and Connectors. (A) Threadless couplings and connectors used with conduit shall be made tight. Where buried in masonry or concrete, they shall be the concretetight type. Where installed in wet locations, they shall comply with 314.15. Threadless couplings and connectors shall not be used on threaded conduit ends unless listed for the purpose. 314.15 Damp or Wet Locations. In Damp or Wet Locations boxes, FIELD REACTION TO BRIDGEPORT RAINTIGHT conduit bodies, and fittings shall be placed or equipped so as to prevent moisture from entering or accumulating within the box, conduit body, or fitting. Boxes, conduit bodies, and fittings installed in wet locations shall be listed for use in wet locations. “Having an easy way to visually identify is important. Inspectors in the Cities of Glendale, AZ and Phoenix, AZ are enforcing the NEC requirement for raceways in a wet location.” 330.40 Boxes and Fittings. Fittings used for connecting Type MC cable to boxes, cabinets, or other equipment shall be listed and identified for such use. Greg Wallace, President GWI Electric, Glendale Arizona RAINTIGHT DONE RIGHT. Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007, National Fire Protection Association, Quincy, MA 02169. This reprinted material is not the complete and official position of the NFPA on the referenced subject, which is represented only by the standard in its entirety. Distributed by: UL REQUIREMENTS Effective March 2002, UL implemented a specification revision that caused “In addition to being blue in color, Bridgeport’s UL Listed EMT fittings have the word Raintight cast into the fitting body, which makes it easy to confirm the right fittings are being used.” Bob White, Project Manager Rizzo Corporation, Danbury Connecticut Bridgeport Fittings, Inc. 705 Lordship Blvd. Stratford, CT 06615-7313 industry standard split ring compression connectors to be incapable of Voice: 203.377.5944 Fax: 203.381.3488 E-mail: sales@bptfittings.com requirements, thereby ensuring their products consistently and effectively passing UL testing. Bridgeport solved this design issue and became the industry’s first manufacturer to meet the more stringent UL follow-up test excluded water. This allowed Bridgeport to mark their fittings “Raintight.” Some manufacturers have elected to color code their raintight gland www.bptfittings.com nuts for identification purposes. A few manufacturers, including Bridgeport, have chosen the color blue for their steel EMT raintight w w w. b p t f i t t i n g s . c o m s lit ho gr fp aph o ic Printed in the U.S.A. © 2009 Bridgeport Fittings, Inc. All rights reserved. Cert no. XX-XXX-XXXXXX fittings. Exclusive to Bridgeport is the use of the color blue on their zinc compression raintight fittings. 3/09 7500 BP078 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 1 WE ENGINEERED THE WATER OUT BY ENGINEERING THE QUALITY IN RAINTIGHT FITTINGS OTHER RAINTIGHT PRODUCTS CORD GRIP SOLUTIONS ® NEC REQUIREMENTS The National Electrical Code® (NEC) provides requirements and recommendations that govern this country’s wiring practices and Raintight in all the sizes and configurations you need electrical installations. NEC articles and sections that detail the Whatever the size and whatever the configuration, Complete solutions in zinc, steel and aluminum use of conduit and cable products in a wet location are listed below. Consult Bridgeport Catalog NEC Articles NFPA 70®, National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Quincy, MA. Bridgeport has the raintight solution. You can get Bridgeport innovations for cable, EMT and rigid conduit, with more choices in 1/2” to 4” trade sizes. Our separate sealing 358.42 Couplings and Connectors used with EMT shall be made up rings ensure a raintight seal and split-type compression tight. Where buried in masonry or concrete, they shall be concretetight rings make for fast, reliable installation. With Bridgeport type. They shall be listed for use in wet locations and comply with UL-Listed raintight fittings, you can meet any code Article 314.15. and fill any specification. Bridgeport quality shines on even the rainiest days. 344.42 Couplings and Connectors. (A) Threadless couplings and connectors used with conduit shall be made tight. Where buried in masonry or concrete, they shall be the concretetight type. Where installed in wet locations, they shall comply with 314.15. Threadless couplings and connectors shall not be used on threaded conduit ends unless listed for the purpose. 314.15 Damp or Wet Locations. In Damp or Wet Locations boxes, TESTIMONIALS conduit bodies, and fittings shall be placed or equipped so as to prevent moisture from entering or accumulating within the box, conduit body, or fitting. Boxes, conduit bodies, and fittings installed in wet locations shall be listed for use in wet locations. “Having an easy way to visually identify is important. Inspectors in the Cities of Glendale, AZ and Phoenix, AZ are enforcing the NEC requirement for raceways in a wet location.” 330.40 Boxes and Fittings. Fittings used for connecting Type MC cable to boxes, cabinets, or other equipment shall be listed and identified for such use. Greg Wallace, President GWI Electric, Glendale Arizona RAINTIGHT DONE RIGHT. Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007, National Fire Protection Association, Quincy, MA 02169. This reprinted material is not the complete and official position of the NFPA on the referenced subject, which is represented only by the standard in its entirety. Distributed by: UL REQUIREMENTS Effective March 2002, UL implemented a specification revision that caused “In addition to being blue in color, Bridgeport’s UL Listed EMT fittings have the word Raintight cast into the fitting body, which makes it easy to confirm the right fittings are being used.” Bob White, Project Manager Rizzo Corporation, Danbury Connecticut Bridgeport Fittings, Inc. 705 Lordship Blvd. Stratford, CT 06615-7313 industry standard split ring compression connectors to be incapable of Voice: 203.377.5944 Fax: 203.381.3488 E-mail: sales@bptfittings.com meet the more stringent UL follow-up test requirements, thereby ensuring passing UL testing. Bridgeport solved this issue by developing a patented EMT raintight design and became the industry’s first manufacturer to their products consistently and effectively excluded water. This allowed Bridgeport to mark their fittings “Raintight.” www.bptfittings.com Some manufacturers have elected to color code their raintight gland nuts for identification purposes. A few manufacturers, including Bridgeport, have w w w. b p t f i t t i n g s . c o m s lit ho gr fp aph o ic Printed in the U.S.A. © 2009 Bridgeport Fittings, Inc. All rights reserved. Cert no. XX-XXX-XXXXXX chosen the color blue for their steel EMT raintight fittings. Exclusive to Bridgeport is the use of the color blue on their zinc EMT raintight fittings. 3/09 7500 BP078 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 1 WE ENGINEERED THE WATER OUT BY ENGINEERING THE QUALITY IN RAINTIGHT FITTINGS OTHER RAINTIGHT PRODUCTS CORD GRIP SOLUTIONS ® NEC REQUIREMENTS The National Electrical Code® (NEC) provides requirements and recommendations that govern this country’s wiring practices and Raintight in all the sizes and configurations you need electrical installations. NEC articles and sections that detail the Whatever the size and whatever the configuration, Complete solutions in zinc, steel and aluminum use of conduit and cable products in a wet location are listed below. Consult Bridgeport Catalog NEC Articles NFPA 70®, National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Quincy, MA. Bridgeport has the raintight solution. You can get Bridgeport innovations for cable, EMT and rigid conduit, with more choices in 1/2” to 4” trade sizes. Our separate sealing 358.42 Couplings and Connectors used with EMT shall be made up rings ensure a raintight seal and split-type compression tight. Where buried in masonry or concrete, they shall be concretetight rings make for fast, reliable installation. With Bridgeport type. They shall be listed for use in wet locations and comply with UL-Listed raintight fittings, you can meet any code Article 314.15. and fill any specification. Bridgeport quality shines on even the rainiest days. 344.42 Couplings and Connectors. (A) Threadless couplings and connectors used with conduit shall be made tight. Where buried in masonry or concrete, they shall be the concretetight type. Where installed in wet locations, they shall comply with 314.15. Threadless couplings and connectors shall not be used on threaded conduit ends unless listed for the purpose. 314.15 Damp or Wet Locations. In Damp or Wet Locations boxes, TESTIMONIALS conduit bodies, and fittings shall be placed or equipped so as to prevent moisture from entering or accumulating within the box, conduit body, or fitting. Boxes, conduit bodies, and fittings installed in wet locations shall be listed for use in wet locations. “Having an easy way to visually identify is important. Inspectors in the Cities of Glendale, AZ and Phoenix, AZ are enforcing the NEC requirement for raceways in a wet location.” 330.40 Boxes and Fittings. Fittings used for connecting Type MC cable to boxes, cabinets, or other equipment shall be listed and identified for such use. Greg Wallace, President GWI Electric, Glendale Arizona RAINTIGHT DONE RIGHT. Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007, National Fire Protection Association, Quincy, MA 02169. This reprinted material is not the complete and official position of the NFPA on the referenced subject, which is represented only by the standard in its entirety. Distributed by: UL REQUIREMENTS Effective March 2002, UL implemented a specification revision that caused “In addition to being blue in color, Bridgeport’s UL Listed EMT fittings have the word Raintight cast into the fitting body, which makes it easy to confirm the right fittings are being used.” Bob White, Project Manager Rizzo Corporation, Danbury Connecticut Bridgeport Fittings, Inc. 705 Lordship Blvd. Stratford, CT 06615-7313 industry standard split ring compression connectors to be incapable of Voice: 203.377.5944 Fax: 203.381.3488 E-mail: sales@bptfittings.com meet the more stringent UL follow-up test requirements, thereby ensuring passing UL testing. Bridgeport solved this issue by developing a patented EMT raintight design and became the industry’s first manufacturer to their products consistently and effectively excluded water. This allowed Bridgeport to mark their fittings “Raintight.” www.bptfittings.com Some manufacturers have elected to color code their raintight gland nuts for identification purposes. A few manufacturers, including Bridgeport, have w w w. b p t f i t t i n g s . c o m s lit ho gr fp aph o ic Printed in the U.S.A. © 2009 Bridgeport Fittings, Inc. All rights reserved. Cert no. XX-XXX-XXXXXX chosen the color blue for their steel EMT raintight fittings. Exclusive to Bridgeport is the use of the color blue on their zinc EMT raintight fittings. 3/09 7500 BP078 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 2 www.bptfittings.com Product Name Catalog Number ZINC RAINTIGHT COMPRESSION CONNECTORS Zinc Die Cast 250-RT2 251-RT2 252-RT2 253-RT2 254-RT2 255-RT2 256-RT2 257-RT2 258-RT2 259-RT2 UPC Number Trade Size Unit Qty. Std. Pkg. Qty. 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT Zinc Die Cast Zinc Die Cast / Insulated Throat - 90°C 250-RTI2 251-RTI2 252-RTI2 253-RTI2 254-RTI2 255-RTI2 256-RTI2 257-RTI2 258-RTI2 259-RTI2 ZINC RAINTIGHT COMPRESSION COUPLINGS STEEL RAINTIGHT COMPRESSION CONNECTORS 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 LIQUID TIGHT CONNECTORS, STRAIGHT 250-SRT 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 Steel MADE IN THE USA! 250-USRT 251-USRT 252-USRT 253-USRT 254-USRT 255-USRT 250-USRT STEEL RAINTIGHT COMPRESSION COUPLINGS 260-SRT 30250 30251 30252 30253 30254 30255 13250 13251 13252 13253 13254 13255 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 20 10 ------2 2 ----- 250 200 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 20 10 ------- 250 200 100 25 25 10 Steel MADE IN THE USA! 260-USRT 260-USRT 261-USRT 262-USRT 263-USRT 264-USRT 265-USRT 30260 30261 30262 30263 30264 30265 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 Catalog Number LIQUID TIGHT CONNECTORS, 45° (CON’T) 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 LIQUID TIGHT CONNECTORS, 90° Malleable LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, STRAIGHT 02429 02430 02431 02432 02433 02434 02435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 04429 04430 04431 04432 04433 04434 04435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 02436 02437 02438 02439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 04436 04437 04438 04439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 20429 20430 20431 20432 20433 20434 20435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 Steel with Aluminum Lug / Insulated Throat - 105°C 429-SLTIG 430-SLTIG 431-SLTIG 432-SLTIG 433-SLTIG 434-SLTIG 435-SLTIG LIQUID TIGHT CONNECTORS, 45° 04449 04450 04451 04452 04453 04454 04455 04456 04457 04458 04459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 15469 15470 15471 15472 15473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 24429 24430 24431 24432 24433 24434 24435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 02449 02450 02451 02452 02453 02454 02455 02456 02457 02458 02459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT & 90° Straight Non-Metallic 469-LT2 470-LT2 471-LT2 472-LT2 473-LT2 16469 16470 16471 16472 16473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 15474 15475 15476 15477 15478 15479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 429-NMLT SCREW-ON LIQUID TIGHT CONNECTORS, STRAIGHT & 90° LIQUID TIGHT CONNECTORS, 90° 16474 16475 16476 16477 16478 16479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 02469 02470 02471 02472 02473 02474 02475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 Steel 469-SLT 470-SLT 471-SLT 472-SLT 473-SLT 474-SLT 475-SLT Steel 04469 04470 04471 04472 04473 04474 04475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 02476 02477 02478 02479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 Malleable Iron Malleable Iron / Insulated Throat - 105°C 476-SLTI 477-SLTI 478-SLTI 479-SLTI LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, 90° 04476 04477 04478 04479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 470-NMLTS 20469 20470 20471 20472 20473 20474 20475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 Steel with Aluminum / Insulated Throat - 105°C Steel with Aluminum Lug 469-SLTIG 470-SLTIG 471-SLTIG 472-SLTIG 473-SLTIG 474-SLTIG 475-SLTIG 24469 24470 24471 24472 24473 24474 24475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 470-NMLTS 471-NMLTS RAINTIGHT COMBINATION/ TRANSITION COUPLINGS Zinc Die Cast Std. Pkg. Qty. 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 25 10 10 40469 40470 40471 40472 40473 40474 40475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 2 2 2 100 100 50 25 10 10 10 44430 44431 1/2” 3/4” 25 25 100 100 THREADED HUBS Zinc Die Cast 44470 44471 1/2” 3/4” 10 10 100 100 4360-DC 94360 1/2” 25 100 4361-DC 94361 3/4” 10 50 To join metallic or non-metallic "Type "B" liquid tight to EMT. 151-DC 152-DC 153-DC 154-DC 155-DC 156-DC 157-DC 158-DC 159-DC 160-DC TYPE 4 Watertight 09151 09152 09153 09154 09155 09156 09157 09158 09159 09160 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 2 2 ----1 1 100 100 50 25 20 20 10 5 5 5 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 10 5 --------------- 100 100 50 25 20 10 5 5 4 5 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 25 25 25 25 5 5 5 5 200 100 100 100 100 100 25 25 25 25 SELF-ALIGNING, RAINTIGHT THREE-PIECE CONDUIT COUPLINGS Malleable Iron SEALING LOCKNUTS Steel / PVC Seal LIQUID TIGHT SEALING RINGS Polyethylene With Steel Retainer 1121-RT 1122-RT 1123-RT 1124-RT 1125-RT 1126-RT 1127-RT 1128-RT 1129-RT 1130-RT 141 142 143 144 145 146 147 148 149 150 SR-050 SR-075 SR-100 SR-125 SR-150 SR-200 SR-250 SR-300 SR-350 SR-400 Steel with Aluminum Lug 469-SLTG 470-SLTG 471-SLTG 472-SLTG 473-SLTG 474-SLTG 475-SLTG 40429 40430 40431 40432 40433 40434 40435 Unit Qty. 90° Non-Metallic Malleable Iron 476-SLT 477-SLT 478-SLT 479-SLT 469-NMLT 470-NMLT 471-NMLT 472-NMLT 473-NMLT 474-NMLT 475-NMLT 430-NMLTS 431-NMLTS Steel / Insulated Throat - 105°C 469-SLTI 470-SLTI 471-SLTI 472-SLTI 473-SLTI 474-SLTI 475-SLTI 429-NMLT 430-NMLT 431-NMLT 432-NMLT 433-NMLT 434-NMLT 435-NMLT Trade Size Straight Non-Metallic 430-NMLTS Cast Zinc / Insulated Throat - 105°C 474-LTI2 475-LTI2 476-LTI2 477-LTI2 478-LTI2 479-LTI2 UPC Number 90° Non-Metallic 470-NMLT Die Cast Zinc 474-LT2 475-LT2 476-LT2 477-LT2 478-LT2 479-LT2 Malleable Iron 449-SLT 450-SLT 451-SLT 452-SLT 453-SLT 454-SLT 455-SLT 456-SLT 457-SLT 458-SLT 459-SLT Std. Pkg. Qty. Cast Zinc Steel with Aluminum Lug 429-SLTG 430-SLTG 431-SLTG 432-SLTG 433-SLTG 434-SLTG 435-SLTG Unit Qty. Malleable Iron / Insulated Throat - 105°C 469-LTI2 470-LTI2 471-LTI2 472-LTI2 473-LTI2 Malleable Iron / Insulated Throat - 105°C 436-SLTI 437-SLTI 438-SLTI 439-SLTI Trade Size Die Cast Zinc / Insulated Throat - 105°C Malleable Iron 436-SLT 437-SLT 438-SLT 439-SLT UPC Number 449-SLTI 450-SLTI 451-SLTI 452-SLTI 453-SLTI 454-SLTI 455-SLTI 456-SLTI 457-SLTI 458-SLTI 459-SLTI Steel 429-SLTI 430-SLTI 431-SLTI 432-SLTI 433-SLTI 434-SLTI 435-SLTI Steel Steel 260-SRT 261-SRT 262-SRT 263-SRT 264-SRT 265-SRT 266-SRT 267-SRT 268-SRT 269-SRT 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 429-LT2 430-LT2 431-LT2 432-LT2 433-LT2 434-LT2 435-LT2 436-LT2 437-LT2 438-LT2 439-LT2 Product Name Steel / Insulated Throat - 105°C Steel / Insulated Throat - 105°C MADE IN THE USA! 250-USRTI 251-USRTI 252-USRTI 253-USRTI 254-USRTI 255-USRTI Std. Pkg. Qty. 429-SLT 430-SLT 431-SLT 432-SLT 433-SLT 434-SLT 435-SLT Steel / Insulated Throat - 105°C 250-SRTI 251-SRTI 252-SRTI 253-SRTI 254-SRTI 255-SRTI 256-SRTI 257-SRTI 258-SRTI 259-SRTI Unit Qty. 429-LTI2 430-LTI2 431-LTI2 432-LTI2 433-LTI2 434-LTI2 435-LTI2 436-LTI2 437-LTI2 438-LTI2 439-LTI2 Steel 250-SRT 251-SRT 252-SRT 253-SRT 254-SRT 255-SRT 256-SRT 257-SRT 258-SRT 259-SRT Trade Size Zinc Die Cast / Insulated Throat - 105°C Zinc Die Cast 260-RT 261-RT 262-RT 263-RT 264-RT 265-RT 266-RT 267-RT 268-RT 269-RT UPC Number JACKETED MC AND TECK CABLE CONNECTOR 90° JACKETED MC AND TECK CABLE CONNECTOR 00141 00142 00143 00144 00145 00146 00147 00148 00149 00150 40490 40491 40492 40493 40494 40495 40496 40497 40498 40499 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 --------- 400 400 400 200 200 200 5 5 5 5 15595 15596 3/8” 3/8” 15 15 60 60 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 595-DC2 596-DC2 Zinc Die Cast / Insulated Throat - 90°C 595-DCI2 596-DCI2 16595 16596 3/8” 3/8” 15 15 60 60 15895 3/8” 10 40 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 895-DC2 Zinc Die Cast / Insulated Throat – 90° C 895-DCI2 16895 3/8” 10 40 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 2 www.bptfittings.com Product Name Catalog Number ZINC RAINTIGHT COMPRESSION CONNECTORS Zinc Die Cast 250-RT2 251-RT2 252-RT2 253-RT2 254-RT2 255-RT2 256-RT2 257-RT2 258-RT2 259-RT2 UPC Number Trade Size Unit Qty. Std. Pkg. Qty. 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT Zinc Die Cast Zinc Die Cast / Insulated Throat - 90°C 250-RTI2 251-RTI2 252-RTI2 253-RTI2 254-RTI2 255-RTI2 256-RTI2 257-RTI2 258-RTI2 259-RTI2 ZINC RAINTIGHT COMPRESSION COUPLINGS STEEL RAINTIGHT COMPRESSION CONNECTORS 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 LIQUID TIGHT CONNECTORS, STRAIGHT 250-SRT 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 Steel MADE IN THE USA! 250-USRT 251-USRT 252-USRT 253-USRT 254-USRT 255-USRT 250-USRT STEEL RAINTIGHT COMPRESSION COUPLINGS 260-SRT 30250 30251 30252 30253 30254 30255 13250 13251 13252 13253 13254 13255 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 20 10 ------2 2 ----- 250 200 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 20 10 ------- 250 200 100 25 25 10 Steel MADE IN THE USA! 260-USRT 260-USRT 261-USRT 262-USRT 263-USRT 264-USRT 265-USRT 30260 30261 30262 30263 30264 30265 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 Catalog Number LIQUID TIGHT CONNECTORS, 45° (CON’T) 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 LIQUID TIGHT CONNECTORS, 90° Malleable LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, STRAIGHT 02429 02430 02431 02432 02433 02434 02435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 04429 04430 04431 04432 04433 04434 04435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 02436 02437 02438 02439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 04436 04437 04438 04439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 20429 20430 20431 20432 20433 20434 20435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 Steel with Aluminum Lug / Insulated Throat - 105°C 429-SLTIG 430-SLTIG 431-SLTIG 432-SLTIG 433-SLTIG 434-SLTIG 435-SLTIG LIQUID TIGHT CONNECTORS, 45° 04449 04450 04451 04452 04453 04454 04455 04456 04457 04458 04459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 15469 15470 15471 15472 15473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 24429 24430 24431 24432 24433 24434 24435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 02449 02450 02451 02452 02453 02454 02455 02456 02457 02458 02459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT & 90° Straight Non-Metallic 469-LT2 470-LT2 471-LT2 472-LT2 473-LT2 16469 16470 16471 16472 16473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 15474 15475 15476 15477 15478 15479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 429-NMLT SCREW-ON LIQUID TIGHT CONNECTORS, STRAIGHT & 90° LIQUID TIGHT CONNECTORS, 90° 16474 16475 16476 16477 16478 16479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 02469 02470 02471 02472 02473 02474 02475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 Steel 469-SLT 470-SLT 471-SLT 472-SLT 473-SLT 474-SLT 475-SLT Steel 04469 04470 04471 04472 04473 04474 04475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 02476 02477 02478 02479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 Malleable Iron Malleable Iron / Insulated Throat - 105°C 476-SLTI 477-SLTI 478-SLTI 479-SLTI LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, 90° 04476 04477 04478 04479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 470-NMLTS 20469 20470 20471 20472 20473 20474 20475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 Steel with Aluminum / Insulated Throat - 105°C Steel with Aluminum Lug 469-SLTIG 470-SLTIG 471-SLTIG 472-SLTIG 473-SLTIG 474-SLTIG 475-SLTIG 24469 24470 24471 24472 24473 24474 24475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 470-NMLTS 471-NMLTS RAINTIGHT COMBINATION/ TRANSITION COUPLINGS Zinc Die Cast Std. Pkg. Qty. 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 25 10 10 40469 40470 40471 40472 40473 40474 40475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 2 2 2 100 100 50 25 10 10 10 44430 44431 1/2” 3/4” 25 25 100 100 THREADED HUBS Zinc Die Cast 44470 44471 1/2” 3/4” 10 10 100 100 4360-DC 94360 1/2” 25 100 4361-DC 94361 3/4” 10 50 To join metallic or non-metallic "Type "B" liquid tight to EMT. 151-DC 152-DC 153-DC 154-DC 155-DC 156-DC 157-DC 158-DC 159-DC 160-DC TYPE 4 Watertight 09151 09152 09153 09154 09155 09156 09157 09158 09159 09160 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 2 2 ----1 1 100 100 50 25 20 20 10 5 5 5 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 10 5 --------------- 100 100 50 25 20 10 5 5 4 5 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 25 25 25 25 5 5 5 5 200 100 100 100 100 100 25 25 25 25 SELF-ALIGNING, RAINTIGHT THREE-PIECE CONDUIT COUPLINGS Malleable Iron SEALING LOCKNUTS Steel / PVC Seal LIQUID TIGHT SEALING RINGS Polyethylene With Steel Retainer 1121-RT 1122-RT 1123-RT 1124-RT 1125-RT 1126-RT 1127-RT 1128-RT 1129-RT 1130-RT 141 142 143 144 145 146 147 148 149 150 SR-050 SR-075 SR-100 SR-125 SR-150 SR-200 SR-250 SR-300 SR-350 SR-400 Steel with Aluminum Lug 469-SLTG 470-SLTG 471-SLTG 472-SLTG 473-SLTG 474-SLTG 475-SLTG 40429 40430 40431 40432 40433 40434 40435 Unit Qty. 90° Non-Metallic Malleable Iron 476-SLT 477-SLT 478-SLT 479-SLT 469-NMLT 470-NMLT 471-NMLT 472-NMLT 473-NMLT 474-NMLT 475-NMLT 430-NMLTS 431-NMLTS Steel / Insulated Throat - 105°C 469-SLTI 470-SLTI 471-SLTI 472-SLTI 473-SLTI 474-SLTI 475-SLTI 429-NMLT 430-NMLT 431-NMLT 432-NMLT 433-NMLT 434-NMLT 435-NMLT Trade Size Straight Non-Metallic 430-NMLTS Cast Zinc / Insulated Throat - 105°C 474-LTI2 475-LTI2 476-LTI2 477-LTI2 478-LTI2 479-LTI2 UPC Number 90° Non-Metallic 470-NMLT Die Cast Zinc 474-LT2 475-LT2 476-LT2 477-LT2 478-LT2 479-LT2 Malleable Iron 449-SLT 450-SLT 451-SLT 452-SLT 453-SLT 454-SLT 455-SLT 456-SLT 457-SLT 458-SLT 459-SLT Std. Pkg. Qty. Cast Zinc Steel with Aluminum Lug 429-SLTG 430-SLTG 431-SLTG 432-SLTG 433-SLTG 434-SLTG 435-SLTG Unit Qty. Malleable Iron / Insulated Throat - 105°C 469-LTI2 470-LTI2 471-LTI2 472-LTI2 473-LTI2 Malleable Iron / Insulated Throat - 105°C 436-SLTI 437-SLTI 438-SLTI 439-SLTI Trade Size Die Cast Zinc / Insulated Throat - 105°C Malleable Iron 436-SLT 437-SLT 438-SLT 439-SLT UPC Number 449-SLTI 450-SLTI 451-SLTI 452-SLTI 453-SLTI 454-SLTI 455-SLTI 456-SLTI 457-SLTI 458-SLTI 459-SLTI Steel 429-SLTI 430-SLTI 431-SLTI 432-SLTI 433-SLTI 434-SLTI 435-SLTI Steel Steel 260-SRT 261-SRT 262-SRT 263-SRT 264-SRT 265-SRT 266-SRT 267-SRT 268-SRT 269-SRT 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 429-LT2 430-LT2 431-LT2 432-LT2 433-LT2 434-LT2 435-LT2 436-LT2 437-LT2 438-LT2 439-LT2 Product Name Steel / Insulated Throat - 105°C Steel / Insulated Throat - 105°C MADE IN THE USA! 250-USRTI 251-USRTI 252-USRTI 253-USRTI 254-USRTI 255-USRTI Std. Pkg. Qty. 429-SLT 430-SLT 431-SLT 432-SLT 433-SLT 434-SLT 435-SLT Steel / Insulated Throat - 105°C 250-SRTI 251-SRTI 252-SRTI 253-SRTI 254-SRTI 255-SRTI 256-SRTI 257-SRTI 258-SRTI 259-SRTI Unit Qty. 429-LTI2 430-LTI2 431-LTI2 432-LTI2 433-LTI2 434-LTI2 435-LTI2 436-LTI2 437-LTI2 438-LTI2 439-LTI2 Steel 250-SRT 251-SRT 252-SRT 253-SRT 254-SRT 255-SRT 256-SRT 257-SRT 258-SRT 259-SRT Trade Size Zinc Die Cast / Insulated Throat - 105°C Zinc Die Cast 260-RT 261-RT 262-RT 263-RT 264-RT 265-RT 266-RT 267-RT 268-RT 269-RT UPC Number JACKETED MC AND TECK CABLE CONNECTOR 90° JACKETED MC AND TECK CABLE CONNECTOR 00141 00142 00143 00144 00145 00146 00147 00148 00149 00150 40490 40491 40492 40493 40494 40495 40496 40497 40498 40499 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 --------- 400 400 400 200 200 200 5 5 5 5 15595 15596 3/8” 3/8” 15 15 60 60 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 595-DC2 596-DC2 Zinc Die Cast / Insulated Throat - 90°C 595-DCI2 596-DCI2 16595 16596 3/8” 3/8” 15 15 60 60 15895 3/8” 10 40 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 895-DC2 Zinc Die Cast / Insulated Throat – 90° C 895-DCI2 16895 3/8” 10 40 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 2 www.bptfittings.com Product Name Catalog Number ZINC RAINTIGHT COMPRESSION CONNECTORS Zinc Die Cast 250-RT2 251-RT2 252-RT2 253-RT2 254-RT2 255-RT2 256-RT2 257-RT2 258-RT2 259-RT2 UPC Number Trade Size Unit Qty. Std. Pkg. Qty. 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT Zinc Die Cast Zinc Die Cast / Insulated Throat - 90°C 250-RTI2 251-RTI2 252-RTI2 253-RTI2 254-RTI2 255-RTI2 256-RTI2 257-RTI2 258-RTI2 259-RTI2 ZINC RAINTIGHT COMPRESSION COUPLINGS STEEL RAINTIGHT COMPRESSION CONNECTORS 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 LIQUID TIGHT CONNECTORS, STRAIGHT 250-SRT 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 Steel MADE IN THE USA! 250-USRT 251-USRT 252-USRT 253-USRT 254-USRT 255-USRT 250-USRT STEEL RAINTIGHT COMPRESSION COUPLINGS 260-SRT 30250 30251 30252 30253 30254 30255 13250 13251 13252 13253 13254 13255 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 20 10 ------2 2 ----- 250 200 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 20 10 ------- 250 200 100 25 25 10 Steel MADE IN THE USA! 260-USRT 260-USRT 261-USRT 262-USRT 263-USRT 264-USRT 265-USRT 30260 30261 30262 30263 30264 30265 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 Catalog Number LIQUID TIGHT CONNECTORS, 45° (CON’T) 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 LIQUID TIGHT CONNECTORS, 90° Malleable LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, STRAIGHT 02429 02430 02431 02432 02433 02434 02435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 04429 04430 04431 04432 04433 04434 04435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 02436 02437 02438 02439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 04436 04437 04438 04439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 20429 20430 20431 20432 20433 20434 20435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 Steel with Aluminum Lug / Insulated Throat - 105°C 429-SLTIG 430-SLTIG 431-SLTIG 432-SLTIG 433-SLTIG 434-SLTIG 435-SLTIG LIQUID TIGHT CONNECTORS, 45° 04449 04450 04451 04452 04453 04454 04455 04456 04457 04458 04459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 15469 15470 15471 15472 15473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 24429 24430 24431 24432 24433 24434 24435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 02449 02450 02451 02452 02453 02454 02455 02456 02457 02458 02459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT & 90° Straight Non-Metallic 469-LT2 470-LT2 471-LT2 472-LT2 473-LT2 16469 16470 16471 16472 16473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 15474 15475 15476 15477 15478 15479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 429-NMLT SCREW-ON LIQUID TIGHT CONNECTORS, STRAIGHT & 90° LIQUID TIGHT CONNECTORS, 90° 16474 16475 16476 16477 16478 16479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 02469 02470 02471 02472 02473 02474 02475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 Steel 469-SLT 470-SLT 471-SLT 472-SLT 473-SLT 474-SLT 475-SLT Steel 04469 04470 04471 04472 04473 04474 04475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 02476 02477 02478 02479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 Malleable Iron Malleable Iron / Insulated Throat - 105°C 476-SLTI 477-SLTI 478-SLTI 479-SLTI LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, 90° 04476 04477 04478 04479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 470-NMLTS 20469 20470 20471 20472 20473 20474 20475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 Steel with Aluminum / Insulated Throat - 105°C Steel with Aluminum Lug 469-SLTIG 470-SLTIG 471-SLTIG 472-SLTIG 473-SLTIG 474-SLTIG 475-SLTIG 24469 24470 24471 24472 24473 24474 24475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 470-NMLTS 471-NMLTS RAINTIGHT COMBINATION/ TRANSITION COUPLINGS Zinc Die Cast Std. Pkg. Qty. 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 25 10 10 40469 40470 40471 40472 40473 40474 40475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 2 2 2 100 100 50 25 10 10 10 44430 44431 1/2” 3/4” 25 25 100 100 THREADED HUBS Zinc Die Cast 44470 44471 1/2” 3/4” 10 10 100 100 4360-DC 94360 1/2” 25 100 4361-DC 94361 3/4” 10 50 To join metallic or non-metallic "Type "B" liquid tight to EMT. 151-DC 152-DC 153-DC 154-DC 155-DC 156-DC 157-DC 158-DC 159-DC 160-DC TYPE 4 Watertight 09151 09152 09153 09154 09155 09156 09157 09158 09159 09160 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 2 2 ----1 1 100 100 50 25 20 20 10 5 5 5 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 10 5 --------------- 100 100 50 25 20 10 5 5 4 5 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 25 25 25 25 5 5 5 5 200 100 100 100 100 100 25 25 25 25 SELF-ALIGNING, RAINTIGHT THREE-PIECE CONDUIT COUPLINGS Malleable Iron SEALING LOCKNUTS Steel / PVC Seal LIQUID TIGHT SEALING RINGS Polyethylene With Steel Retainer 1121-RT 1122-RT 1123-RT 1124-RT 1125-RT 1126-RT 1127-RT 1128-RT 1129-RT 1130-RT 141 142 143 144 145 146 147 148 149 150 SR-050 SR-075 SR-100 SR-125 SR-150 SR-200 SR-250 SR-300 SR-350 SR-400 Steel with Aluminum Lug 469-SLTG 470-SLTG 471-SLTG 472-SLTG 473-SLTG 474-SLTG 475-SLTG 40429 40430 40431 40432 40433 40434 40435 Unit Qty. 90° Non-Metallic Malleable Iron 476-SLT 477-SLT 478-SLT 479-SLT 469-NMLT 470-NMLT 471-NMLT 472-NMLT 473-NMLT 474-NMLT 475-NMLT 430-NMLTS 431-NMLTS Steel / Insulated Throat - 105°C 469-SLTI 470-SLTI 471-SLTI 472-SLTI 473-SLTI 474-SLTI 475-SLTI 429-NMLT 430-NMLT 431-NMLT 432-NMLT 433-NMLT 434-NMLT 435-NMLT Trade Size Straight Non-Metallic 430-NMLTS Cast Zinc / Insulated Throat - 105°C 474-LTI2 475-LTI2 476-LTI2 477-LTI2 478-LTI2 479-LTI2 UPC Number 90° Non-Metallic 470-NMLT Die Cast Zinc 474-LT2 475-LT2 476-LT2 477-LT2 478-LT2 479-LT2 Malleable Iron 449-SLT 450-SLT 451-SLT 452-SLT 453-SLT 454-SLT 455-SLT 456-SLT 457-SLT 458-SLT 459-SLT Std. Pkg. Qty. Cast Zinc Steel with Aluminum Lug 429-SLTG 430-SLTG 431-SLTG 432-SLTG 433-SLTG 434-SLTG 435-SLTG Unit Qty. Malleable Iron / Insulated Throat - 105°C 469-LTI2 470-LTI2 471-LTI2 472-LTI2 473-LTI2 Malleable Iron / Insulated Throat - 105°C 436-SLTI 437-SLTI 438-SLTI 439-SLTI Trade Size Die Cast Zinc / Insulated Throat - 105°C Malleable Iron 436-SLT 437-SLT 438-SLT 439-SLT UPC Number 449-SLTI 450-SLTI 451-SLTI 452-SLTI 453-SLTI 454-SLTI 455-SLTI 456-SLTI 457-SLTI 458-SLTI 459-SLTI Steel 429-SLTI 430-SLTI 431-SLTI 432-SLTI 433-SLTI 434-SLTI 435-SLTI Steel Steel 260-SRT 261-SRT 262-SRT 263-SRT 264-SRT 265-SRT 266-SRT 267-SRT 268-SRT 269-SRT 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 429-LT2 430-LT2 431-LT2 432-LT2 433-LT2 434-LT2 435-LT2 436-LT2 437-LT2 438-LT2 439-LT2 Product Name Steel / Insulated Throat - 105°C Steel / Insulated Throat - 105°C MADE IN THE USA! 250-USRTI 251-USRTI 252-USRTI 253-USRTI 254-USRTI 255-USRTI Std. Pkg. Qty. 429-SLT 430-SLT 431-SLT 432-SLT 433-SLT 434-SLT 435-SLT Steel / Insulated Throat - 105°C 250-SRTI 251-SRTI 252-SRTI 253-SRTI 254-SRTI 255-SRTI 256-SRTI 257-SRTI 258-SRTI 259-SRTI Unit Qty. 429-LTI2 430-LTI2 431-LTI2 432-LTI2 433-LTI2 434-LTI2 435-LTI2 436-LTI2 437-LTI2 438-LTI2 439-LTI2 Steel 250-SRT 251-SRT 252-SRT 253-SRT 254-SRT 255-SRT 256-SRT 257-SRT 258-SRT 259-SRT Trade Size Zinc Die Cast / Insulated Throat - 105°C Zinc Die Cast 260-RT 261-RT 262-RT 263-RT 264-RT 265-RT 266-RT 267-RT 268-RT 269-RT UPC Number JACKETED MC AND TECK CABLE CONNECTOR 90° JACKETED MC AND TECK CABLE CONNECTOR 00141 00142 00143 00144 00145 00146 00147 00148 00149 00150 40490 40491 40492 40493 40494 40495 40496 40497 40498 40499 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 --------- 400 400 400 200 200 200 5 5 5 5 15595 15596 3/8” 3/8” 15 15 60 60 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 595-DC2 596-DC2 Zinc Die Cast / Insulated Throat - 90°C 595-DCI2 596-DCI2 16595 16596 3/8” 3/8” 15 15 60 60 15895 3/8” 10 40 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 895-DC2 Zinc Die Cast / Insulated Throat – 90° C 895-DCI2 16895 3/8” 10 40 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 11:44 AM Page 2 www.bptfittings.com Product Name Catalog Number ZINC RAINTIGHT COMPRESSION CONNECTORS Zinc Die Cast 250-RT2 251-RT2 252-RT2 253-RT2 254-RT2 255-RT2 256-RT2 257-RT2 258-RT2 259-RT2 UPC Number Trade Size Unit Qty. Std. Pkg. Qty. 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT Zinc Die Cast Zinc Die Cast / Insulated Throat - 90°C 250-RTI2 251-RTI2 252-RTI2 253-RTI2 254-RTI2 255-RTI2 256-RTI2 257-RTI2 258-RTI2 259-RTI2 ZINC RAINTIGHT COMPRESSION COUPLINGS STEEL RAINTIGHT COMPRESSION CONNECTORS 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 15 10 10 ----------- 500 250 150 100 40 10 12 12 6 6 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 ------2 2 ----- 250 250 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 LIQUID TIGHT CONNECTORS, STRAIGHT 250-SRT 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 Steel MADE IN THE USA! 250-USRT 251-USRT 252-USRT 253-USRT 254-USRT 255-USRT 250-USRT STEEL RAINTIGHT COMPRESSION COUPLINGS 260-SRT 30250 30251 30252 30253 30254 30255 13250 13251 13252 13253 13254 13255 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 20 10 ------2 2 ----- 250 200 100 25 25 10 10 10 6 6 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 20 10 ------- 250 200 100 25 25 10 Steel MADE IN THE USA! 260-USRT 260-USRT 261-USRT 262-USRT 263-USRT 264-USRT 265-USRT 30260 30261 30262 30263 30264 30265 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 Catalog Number LIQUID TIGHT CONNECTORS, 45° (CON’T) 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 LIQUID TIGHT CONNECTORS, 90° Malleable LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, STRAIGHT 02429 02430 02431 02432 02433 02434 02435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 04429 04430 04431 04432 04433 04434 04435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 02436 02437 02438 02439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 04436 04437 04438 04439 2 1/2” 3” 3 1/2” 4” 1 1 1 1 5 5 5 5 20429 20430 20431 20432 20433 20434 20435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 Steel with Aluminum Lug / Insulated Throat - 105°C 429-SLTIG 430-SLTIG 431-SLTIG 432-SLTIG 433-SLTIG 434-SLTIG 435-SLTIG LIQUID TIGHT CONNECTORS, 45° 04449 04450 04451 04452 04453 04454 04455 04456 04457 04458 04459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 15469 15470 15471 15472 15473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 24429 24430 24431 24432 24433 24434 24435 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 10 5 5 2 125 125 125 50 25 25 10 02449 02450 02451 02452 02453 02454 02455 02456 02457 02458 02459 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 1 --------- 100 100 50 25 25 10 5 1 1 1 1 Product Name Catalog Number LIQUID TIGHT CONNECTORS, STRAIGHT & 90° Straight Non-Metallic 469-LT2 470-LT2 471-LT2 472-LT2 473-LT2 16469 16470 16471 16472 16473 3/8” 1/2” 3/4” 1” 1 1/4” 25 25 10 5 5 100 100 50 25 25 15474 15475 15476 15477 15478 15479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 429-NMLT SCREW-ON LIQUID TIGHT CONNECTORS, STRAIGHT & 90° LIQUID TIGHT CONNECTORS, 90° 16474 16475 16476 16477 16478 16479 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 2 ----------- 10 5 1 1 1 1 02469 02470 02471 02472 02473 02474 02475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 Steel 469-SLT 470-SLT 471-SLT 472-SLT 473-SLT 474-SLT 475-SLT Steel 04469 04470 04471 04472 04473 04474 04475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 02476 02477 02478 02479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 Malleable Iron Malleable Iron / Insulated Throat - 105°C 476-SLTI 477-SLTI 478-SLTI 479-SLTI LIQUID TIGHT CONNECTORS WITH GROUNDING LUG, 90° 04476 04477 04478 04479 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 470-NMLTS 20469 20470 20471 20472 20473 20474 20475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 Steel with Aluminum / Insulated Throat - 105°C Steel with Aluminum Lug 469-SLTIG 470-SLTIG 471-SLTIG 472-SLTIG 473-SLTIG 474-SLTIG 475-SLTIG 24469 24470 24471 24472 24473 24474 24475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 20 20 10 5 4 3 2 100 100 50 25 20 15 10 470-NMLTS 471-NMLTS RAINTIGHT COMBINATION/ TRANSITION COUPLINGS Zinc Die Cast Std. Pkg. Qty. 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 5 2 2 100 100 50 25 25 10 10 40469 40470 40471 40472 40473 40474 40475 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 5 2 2 2 100 100 50 25 10 10 10 44430 44431 1/2” 3/4” 25 25 100 100 THREADED HUBS Zinc Die Cast 44470 44471 1/2” 3/4” 10 10 100 100 4360-DC 94360 1/2” 25 100 4361-DC 94361 3/4” 10 50 To join metallic or non-metallic "Type "B" liquid tight to EMT. 151-DC 152-DC 153-DC 154-DC 155-DC 156-DC 157-DC 158-DC 159-DC 160-DC TYPE 4 Watertight 09151 09152 09153 09154 09155 09156 09157 09158 09159 09160 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 2 2 ----1 1 100 100 50 25 20 20 10 5 5 5 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 10 5 --------------- 100 100 50 25 20 10 5 5 4 5 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 25 25 25 25 5 5 5 5 200 100 100 100 100 100 25 25 25 25 SELF-ALIGNING, RAINTIGHT THREE-PIECE CONDUIT COUPLINGS Malleable Iron SEALING LOCKNUTS Steel / PVC Seal LIQUID TIGHT SEALING RINGS Polyethylene With Steel Retainer 1121-RT 1122-RT 1123-RT 1124-RT 1125-RT 1126-RT 1127-RT 1128-RT 1129-RT 1130-RT 141 142 143 144 145 146 147 148 149 150 SR-050 SR-075 SR-100 SR-125 SR-150 SR-200 SR-250 SR-300 SR-350 SR-400 Steel with Aluminum Lug 469-SLTG 470-SLTG 471-SLTG 472-SLTG 473-SLTG 474-SLTG 475-SLTG 40429 40430 40431 40432 40433 40434 40435 Unit Qty. 90° Non-Metallic Malleable Iron 476-SLT 477-SLT 478-SLT 479-SLT 469-NMLT 470-NMLT 471-NMLT 472-NMLT 473-NMLT 474-NMLT 475-NMLT 430-NMLTS 431-NMLTS Steel / Insulated Throat - 105°C 469-SLTI 470-SLTI 471-SLTI 472-SLTI 473-SLTI 474-SLTI 475-SLTI 429-NMLT 430-NMLT 431-NMLT 432-NMLT 433-NMLT 434-NMLT 435-NMLT Trade Size Straight Non-Metallic 430-NMLTS Cast Zinc / Insulated Throat - 105°C 474-LTI2 475-LTI2 476-LTI2 477-LTI2 478-LTI2 479-LTI2 UPC Number 90° Non-Metallic 470-NMLT Die Cast Zinc 474-LT2 475-LT2 476-LT2 477-LT2 478-LT2 479-LT2 Malleable Iron 449-SLT 450-SLT 451-SLT 452-SLT 453-SLT 454-SLT 455-SLT 456-SLT 457-SLT 458-SLT 459-SLT Std. Pkg. Qty. Cast Zinc Steel with Aluminum Lug 429-SLTG 430-SLTG 431-SLTG 432-SLTG 433-SLTG 434-SLTG 435-SLTG Unit Qty. Malleable Iron / Insulated Throat - 105°C 469-LTI2 470-LTI2 471-LTI2 472-LTI2 473-LTI2 Malleable Iron / Insulated Throat - 105°C 436-SLTI 437-SLTI 438-SLTI 439-SLTI Trade Size Die Cast Zinc / Insulated Throat - 105°C Malleable Iron 436-SLT 437-SLT 438-SLT 439-SLT UPC Number 449-SLTI 450-SLTI 451-SLTI 452-SLTI 453-SLTI 454-SLTI 455-SLTI 456-SLTI 457-SLTI 458-SLTI 459-SLTI Steel 429-SLTI 430-SLTI 431-SLTI 432-SLTI 433-SLTI 434-SLTI 435-SLTI Steel Steel 260-SRT 261-SRT 262-SRT 263-SRT 264-SRT 265-SRT 266-SRT 267-SRT 268-SRT 269-SRT 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 429-LT2 430-LT2 431-LT2 432-LT2 433-LT2 434-LT2 435-LT2 436-LT2 437-LT2 438-LT2 439-LT2 Product Name Steel / Insulated Throat - 105°C Steel / Insulated Throat - 105°C MADE IN THE USA! 250-USRTI 251-USRTI 252-USRTI 253-USRTI 254-USRTI 255-USRTI Std. Pkg. Qty. 429-SLT 430-SLT 431-SLT 432-SLT 433-SLT 434-SLT 435-SLT Steel / Insulated Throat - 105°C 250-SRTI 251-SRTI 252-SRTI 253-SRTI 254-SRTI 255-SRTI 256-SRTI 257-SRTI 258-SRTI 259-SRTI Unit Qty. 429-LTI2 430-LTI2 431-LTI2 432-LTI2 433-LTI2 434-LTI2 435-LTI2 436-LTI2 437-LTI2 438-LTI2 439-LTI2 Steel 250-SRT 251-SRT 252-SRT 253-SRT 254-SRT 255-SRT 256-SRT 257-SRT 258-SRT 259-SRT Trade Size Zinc Die Cast / Insulated Throat - 105°C Zinc Die Cast 260-RT 261-RT 262-RT 263-RT 264-RT 265-RT 266-RT 267-RT 268-RT 269-RT UPC Number JACKETED MC AND TECK CABLE CONNECTOR 90° JACKETED MC AND TECK CABLE CONNECTOR 00141 00142 00143 00144 00145 00146 00147 00148 00149 00150 40490 40491 40492 40493 40494 40495 40496 40497 40498 40499 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 --------- 400 400 400 200 200 200 5 5 5 5 15595 15596 3/8” 3/8” 15 15 60 60 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 595-DC2 596-DC2 Zinc Die Cast / Insulated Throat - 90°C 595-DCI2 596-DCI2 16595 16596 3/8” 3/8” 15 15 60 60 15895 3/8” 10 40 Zinc Die Cast CONCRETE TIGHT RAINTIGHT 895-DC2 Zinc Die Cast / Insulated Throat – 90° C 895-DCI2 16895 3/8” 10 40 1143 RaintightBroch_8 Pager:Layout 1 3/12/09 10:46 AM Page 1 WE ENGINEERED THE WATER OUT BY ENGINEERING THE QUALITY IN RAINTIGHT FITTINGS OTHER RAINTIGHT PRODUCTS CORD GRIP SOLUTIONS ® NEC REQUIREMENTS The National Electrical Code® (NEC) provides requirements and recommendations that govern this country’s wiring practices and Raintight in all the sizes and configurations you need electrical installations. NEC articles and sections that detail the Whatever the size and whatever the configuration, Complete solutions in zinc, steel and aluminum use of conduit and cable products in a wet location are listed below. Consult Bridgeport Catalog NEC Articles NFPA 70®, National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Quincy, MA. Bridgeport has the raintight solution. You can get Bridgeport innovations for cable, EMT and rigid conduit, with more choices in 1/2” to 4” trade sizes. Our separate sealing 358.42 Couplings and Connectors used with EMT shall be made up rings ensure a raintight seal and split-type compression tight. Where buried in masonry or concrete, they shall be concretetight rings make for fast, reliable installation. With Bridgeport type. They shall be listed for use in wet locations and comply with UL-Listed raintight fittings, you can meet any code Article 314.15. and fill any specification. Bridgeport quality shines on even the rainiest days. 344.42 Couplings and Connectors. (A) Threadless couplings and connectors used with conduit shall be made tight. Where buried in masonry or concrete, they shall be the concretetight type. Where installed in wet locations, they shall comply with 314.15. Threadless couplings and connectors shall not be used on threaded conduit ends unless listed for the purpose. 314.15 Damp or Wet Locations. In Damp or Wet Locations boxes, FIELD REACTION TO BRIDGEPORT RAINTIGHT conduit bodies, and fittings shall be placed or equipped so as to prevent moisture from entering or accumulating within the box, conduit body, or fitting. Boxes, conduit bodies, and fittings installed in wet locations shall be listed for use in wet locations. “Having an easy way to visually identify is important. Inspectors in the Cities of Glendale, AZ and Phoenix, AZ are enforcing the NEC requirement for raceways in a wet location.” 330.40 Boxes and Fittings. Fittings used for connecting Type MC cable to boxes, cabinets, or other equipment shall be listed and identified for such use. Greg Wallace, President GWI Electric, Glendale Arizona RAINTIGHT DONE RIGHT. Reprinted with permission from NFPA 70®, National Electrical Code®, Copyright © 2007, National Fire Protection Association, Quincy, MA 02169. This reprinted material is not the complete and official position of the NFPA on the referenced subject, which is represented only by the standard in its entirety. Distributed by: UL REQUIREMENTS Effective March 2002, UL implemented a specification revision that caused “In addition to being blue in color, Bridgeport’s UL Listed EMT fittings have the word Raintight cast into the fitting body, which makes it easy to confirm the right fittings are being used.” Bob White, Project Manager Rizzo Corporation, Danbury Connecticut Bridgeport Fittings, Inc. 705 Lordship Blvd. Stratford, CT 06615-7313 industry standard split ring compression connectors to be incapable of Voice: 203.377.5944 Fax: 203.381.3488 E-mail: sales@bptfittings.com requirements, thereby ensuring their products consistently and effectively passing UL testing. Bridgeport solved this design issue and became the industry’s first manufacturer to meet the more stringent UL follow-up test excluded water. This allowed Bridgeport to mark their fittings “Raintight.” Some manufacturers have elected to color code their raintight gland www.bptfittings.com nuts for identification purposes. A few manufacturers, including Bridgeport, have chosen the color blue for their steel EMT raintight w w w. b p t f i t t i n g s . c o m s lit ho gr fp aph o ic Printed in the U.S.A. © 2009 Bridgeport Fittings, Inc. All rights reserved. Cert no. XX-XXX-XXXXXX fittings. Exclusive to Bridgeport is the use of the color blue on their zinc compression raintight fittings. 3/09 7500 BP078