Spec
No.NO.
1018
SPEC
1018
REV.
pg.
1/1
REV. 06.01.14,
06.01.14 (pg.
1/2)
Model Series: LLR
The LLR series of laminated racks have a durable, attractive “no visible hardware” black woodgrain finish. The racks provide a simple, cost effective
method of installing electronics in corporate, retail, education, residential and
house of worship applications. Racks assemble easily without special tools,
using Phillips-head cams and dowels. Hardware is not visible on the finished
rack as the cams and dowels install from the inside and include a black cap
to conceal them. This provides a finished, furniture-grade appearance, inside
and out. Ships unassembled.
Features:
• One-pair of 11-ga. steel mounting rails are pre-installed in front panel
space. Rails are printed with rack unit increments for easy equipment
installation.
• Top, bottom and sides are made of a sturdy, 5/8 in. [16mm] wood composite with a black woodgrain laminate finish.
• Load capacity: 200 lbs. [90 kg]
• 20.41"W x 18”D [518mm x 457mm]
• Ships unassembled.
• Made in USA
Optional:
• Rack Rails (LLR-RRT series): mounting rails with thin-flange are designed to fit LLR-series racks to add extra support for rear of rackmounted equipment. Sold in pairs.
A&E Specifications:
The laminated rack shall be Lowell Model ___________. The rack shall measure 20.41" [518mm] wide and have a depth of 18 inches [457mm]. Panel
space height shall be _______ rack units for mounting EIA standard components. Sides, top and bottom shall be constructed of 5/8" [16mm] wood
composite with woodgrain laminate in black finish. Front mounting rails shall
be 11-gauge steel with printed rack unit increments. Rack shall ship
unassembled and feature cam and dowel assembly using standard Phillips
head screwdriver. Cams shall install from the interior and include cover caps.
Model Numbers:
Model No.
Description
Racking Space
Overall Depth
Overall Height
Useable Depth *
Overall Width
LLR-1018-B
Laminated Rack
17.625 in / 448 mm / 10U
18 in / 457 mm
18.90 in / 480 mm
17.5 in / 445 mm
20.41 in / 518 mm
LLR-1218-B
Laminated Rack
21.125 in / 537 mm / 12U
18 in / 457 mm
22.40 in / 569 mm
17.5 in / 445 mm
20.41 in / 518 mm
LLR-1618-B
Laminated Rack
28.125 in / 714 mm / 16U
18 in / 457 mm
29.40 in / 747 mm
17.5 in / 445 mm
20.41 in / 518 mm
LLR-2118-B
Laminated Rack
36.875 in / 937 mm / 21U
18 in / 457 mm
38.15 in / 969 mm
17.5 in / 445 mm
20.41 in / 518 mm
LLR-RRT-10
LLR Rack Rails (1-pr)
10U
LLR-RRT-12
LLR Rack Rails (1-pr)
12U
LLR-RRT-16
LLR Rack Rails (1-pr)
16U
LLR-RRT-21
LLR Rack Rails (1-pr)
21U
One rack unit (RU or U) = 1.75 inches or 44.45 mm. Some measurements have been rounded.
*Front rails are set back 0.5 in [13mm]
©2014 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com | Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
SPEC NO. 1018
REV. 06.01.14, pg. 2/2
TOP VIEW
18” [457mm]
18.000
NO VISIBLE HARDWARE
Rack assembles without
special tools using Phillips
head cams and dowels that
install from the inside. A
black cover conceals the
cam for a furniture-grade
finish inside and out.
.50”
[13mm]
.500
20.41”20.41
[518mm]
FRONT VIEW
.062
[2mm]
.062
SIDE VIEW
NOTE
ASSEMBLED
UNIT IS
Note: assembled unit
APPROX.
is approx.
.032” [1mm]
wider.032
on holeWIDER
C/L Dim.
18.343” [466mm]
ON HOLE
C/L DIM.
18.343
17.843”
17.843
[453mm]
Overall
Height
38.15
Racking
36.875
Space
19.093”
19.093
[485mm]
.063” [2mm]
.063
FIXED MOUNTING RAILS
Sturdy, 11-ga. steel mounting rails are preinstalled in front panel space. Rails feature
a printed scale to facilitate equipment installation. (Optional rear mounting rails can be
purchased separately.)
FURNITURE-GRADE FINISH
LLR-series racks feature a black, woodgrain laminate
finish, ideal for boardrooms or residential use.
©2014 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com | Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.