Hettich Canada, L. P. - Toronto
Head office
90 Snow Blvd.
Concord
Ontario
L4K 4A2
Canada
Hettich Canada, L. P. - Montreal
9435 Route Trans Canadienne
Ville St.-Laurent
Quebec
H4S 1V3
Canada
www.hettich.com
www.hettich.com
www.hettich.com
13041_KA-OFC_0612_USA/HCA/en
Hettich America L.P.
4295 Hamilton Mill Road
Suite 400
Buford, GA 30518
USA
Ball bearing slide KA 5632
with Silent System
Full extension runner for wooden drawers
Assembly instruction
 Ball bearing slide KA 5632 with Silent System soft, automatic closure
 12.7 mm (1/2“) installation width, loading capacity 90 lbs
Precision full extension runner – the integrated self-closing mechanism
with Silent System cushioned closure reliably shuts the draw in virtual
silence
Using a release lever, the drawer can be detached from the runner and
thus removed and re-fitted with ease.
Perfectly extension guarantees smooth move and high lateral stability
For wooden drawers with grooved, rebated or loosely fitted bases
Galvanised steel or black
1
Ball bearing slide KA 5632 with Silent System soft, automatic closure
Hole spacing mm
b2
b3
C
4
Order no.
Galvanised steel
Order no.
black
PU
196
9 128 570
9 128 579
10 pairs
–
246
9 128 571
9 128 580
10 pairs
–
–
296
9 128 572
9 128 581
10 pairs
–
–
346
9 128 573
9 128 582
10 pairs
96
96
–
396
9 128 574
9 128 583
10 pairs
22 1/4
96
128
–
446
9 128 575
9 128 584
10 pairs
24 1/4
96
128
–
496
9 128 576
9 128 585
10 pairs
654
26 1/4
96
128
128
546
9 128 577
9 128 586
10 pairs
704
28 1/4
96
128
128
596
9 128 578
9 128 587
10 pairs
Drawer length
mm
inch
Minimum cabinet depth
mm
inch
b1
300
12
304
12 1/4
–
–
–
350
14
354
14 1/4
56
–
400
16
404
16 1/4
96
450
18
454
18 1/4
96
500
20
504
20 1/4
550
22
554
600
24
604
650
26
700
28
Fixing screws
Order no.
6.0 mm dia. x 14 mm
1 028 128
PU
Application
Corrosion test
1000
Hettich runner systems are suitable for use in
living room, kitchen and office furniture both in
the home and business environment.
Hettich runner systems satisfy the requirements
on corrosion defined in DIN EN 15338, 72-hour
condensation-water test to DIN EN 6270.
Load capacity and over-extension guard
General technical conditions
The loading capacity stated in the catalogue is
understood to mean the weight of the drawer
itself including contents in kg and refers to the
minimum requirements on durability under DIN
EN 15338, Level 1.
All Hettich runner systems feature guards to
prevent the drawer from rolling out and being
removed unintentionally and meet the requirements of the impact test in a test frame to DIN
EN 15338.
Fitted in the proper manner, the runner systems
featured in this catalogue are suitable for furniture defined in DIN 14749. The maximum frontpanel height is governed in particular by material, drawer size and drawer runner. We will
be pleased to provide any further information
you may require.
The fitting instructions, screw-fixing points and
loading information specified in this catalogue
assume proper attachment using Hettich direct
fixing screws or Hettich self-taping screws with
countersunk of the stated size in a cabinet material providing a screw pull-out resistance of
> 1,000 N in accordance with DIN EN 320.
Hettich accepts no responsibility for the use of
materials or fastening methods other than those
stated. If other materials or fastening methods
are used, the furniture manufacturer is required
to verify the system's load-bearing capacity.
Planning dimensions
12,7
Cabinet front edge
23,0
23,0
ø6,0x14 mm
Drawer length
46
ø4x8 mm
37
C
37
ø6,0x14 mm
128
b1
2
Technical Information
 Direct fixing countersunk screw
 Galvanised steel
Dimensions mm
3
b2
b3
Minimum cabinet depth
inimum number of
•=M
screw-fixing points
To attain max. loading capacity, it is recommended to use all main fixing screw holes.
2
www.hettich.com
Technik für Möbel
We reserve all rights to this catalogue under
copyright law. It shall not be permissible to duplicate this catalogue in any form either in whole
or in part without our written consent. Subject
to technical alterations. Errors and omissions
excepted. Subject to colour variations.
General Terms of Sale and Delivery
All products and services will be provided exclusively on the basis of our General Terms of
Sale and Delivery published on our website at
www.hettich-agb.com.
3