LOGSTOR was founded approximately forty years ago, and was the first in the world to manufacture pre-insulated district heating pipes. We have continued to develop our pre-insulated pipe technology to include many new areas of application, and today LOGSTOR
Marine offers complete pre-insulated pipe systems to the marine industry.
Conditions at sea can be tough and this is reflected in the materials and production methods chosen to fabricate the pre-insulated pipe systems. Salt water wave impact, wind, beating rain, heat, cold, and human traffic across the pipes make our pipes the ideal solution as they are impervious to the elements.
Pipes insulated by traditional insulation methods, however, will allow for ingress of water into the insulation. Very rapidly this results in loss of insulation capacity and corrosion of the carrier pipes - making it necessary to earmark resources for constant maintenance and eventual replacement of pipe as well as insulation. At LOGSTOR Marine, we exclusively use corrosion-proof material for the outer jacket, and the
100% watertight insulation system ensures that the carrier pipe is well protected and that all the exposed areas of the pipe system are completely corrosionproof.
LOGSTOR Marine, a member of the
LOGSTOR Group, has developed a 100% watertight insulated pipe system for cargo holds and open deck applications on many kinds of vessels. The insulated pipe system is extremely resistant to the rigors of service at sea.
Pre-insulated pipes require no extra insulation on site and provide a long service life and minimum maintenance as some of the most obvious benefits.

A pre-insulated pipe with a jacket of high density polyethylene (HDPE), PUR insulation and a carrier pipe of mild steel.
Our maritime pre-insulated pipe systems are available for new vessels as well as for retrofitting of older vessels. LOGSTOR Marine supplies complete “readyto-install” pipe systems, tailor made to the specific application.
They precisely match the drawings and specifications provided and fulfill the requirements of the shipyard and shipowner. For retrofit projects, LOGSTOR Marine staff can take precise measurements on board the vessel, which will allow for exact pipe fabrication resulting in considerable time saving and minimal field adjustments.
If the vessel is gas-free and the use of open flame is allowed, the pre-insulated pipes can even be installed at sea during voyage, thus minimizing valuable downtime.
LOGSTOR Marine pipe systems have been type approved by all the major classification societies.
An insulated marine pipe system must be able to resist the enormous forces at sea. The combination of seawater, salt, etc. constitutes an extremely aggressive environment, which can damage the insulation and corrode traditionally insulated pipe systems over a short period of time. Choosing corrosion-proof, pre-insulated pipe systems from LOG-
STOR Marine can solve this problem.

The carrier pipe material varies according to the medium to be transported. The jacket pipes are always made of black high-density polyethylene
(HDPE). All pipes are insulated with PUR foam.
Type B is fitted with an inner layer of mineral wool to accommodate the high operating temperatures.
Type A pipe without tracer from: -200 0 C to +140 0 C
Type A pipe with tracer from: -200 0 C to +140 0 C
Type B pipe without tracer from: +60 0 C to +315 0 C
Type B pipe with tracer from: +60 0 C to +315 0 C

No matter your need,
LOGSTOR Marine provides the most suitable insulation solution.
Our pre-insulated pipe systems are designed for the transportation of all types of liquids and gas in the temperature range from -200°C to +315°C.
In environments where there is a risk of temperatures below the freezing point, we supply pipes with a built-in, self-limiting heating cable or a secondary tracer pipe system. The combination of superior insulation and built-in heating capability can provide frost protection down to –40ºC ambient temperature. Tracer pipe or heating cable can also be used for maintaining a particular liquid at a desired temperature.

Specially designed watertight components made by LOGSTOR Marine are easy to install. Irrespective of the complexity of the pipe system on board, we can manufacture a tailormade solution that totally fits the application.
LOGSTOR Marine has supplied pre-insulated pipe systems to the most sophisticated chemical tankers.
Shipowners all over the world have chosen preinsulated pipe systems from LOGSTOR Marine in order to achieve substantially reduced life cycle costs and trouble-free operation.
LOGSTOR Marine’s pipe systems are built to last throughout the service life of the ship. They provide the following convincing economical benefits:
• minimum maintenance
• improved energy efficiency
• trouble-free operation
Our systems are used on many types of vessels.
You can find them on board:
• chemical and product tankers
• arctic tankers
• asphalt and molten sulphor tankers
• LNG and LPG tankers
Pipe spool installed on a steel construction
Pipe spool with branch and flange connection
AISI 316 L fix point
Emergency shower and eye wash unit

From our technical base in Løgstør, Denmark, manufacturing locations in Denmark, China and Korea and supported by a global network of specialized agents, LOGSTOR Marine manufactures and supplies pre-insulated pipe systems for ships and shipyards worldwide.
We participate as supervisors and consultants during installation and provide training courses on-site for shipyard staff to ensure competent and effective installation of our pipe systems, while making the best use of local resources available.
LOGSTOR Marine has supplied systems to the most sophisticated tankers.

South Korea
Finetec Logstor Insulation Company Korea
5, Block, Anjeong National Industry
Anjung-Ri, Kwangso Myun
Tongyoung
Kyungsangnai 650 – 820
South Korea
Tel.:
Fax:
0082 556 48 73 00
0082 556 48 73 09
Contact: Mr. Y.G. Park
Tel:
Mail:
0082 115417788 yonggpark@finetec.co.kr
Contact: Mr. M. H. Kim
Tel.:
Mail:
0082 556 48 73 00 myunghkim@finetec.co.kr
China
LOGSTOR Insulation Co. (Wuxi) Ltd.
Changjiang South Road 17 – 10
Wuxi National High-tech Industrial Development
Jiangsu 214028
China
Tel.:
Fax:
+86 510 85 34 31 19
+86 510 85 34 33 39
Contact: Mr. Jesper Hammer Jakobsen
Mobile 1: +45 2088 3559
Mobile 2: +86 137 64 31 96 44
Tel. 1: +45 9966 1000
Tel. 2: +86 21 5840 8938
Fax 1: +45 9966 1510
Fax 2: +86 21 5840 8917
Mail: jhj@logstor.com
Contact: Mr. Jørgen Berth
Mobile: +45 40561510
Tel.:
Mail:
+45 99661510 job@logstor.com
Worldwide representative of
LOGSTOR, Marine Division:
LR Marine A/S
Silovej 8, 5A
DK-9900 Frederikshavn
Denmark
Tel.:
Fax:
+45 7734 1550
+45 7734 1551
Contact: Mr. John Nielsen
Mobile: +45 2271 8830
Mail: jon@lrmarine.dk
Company facts
• Headquarters in Denmark
• 10 factories, located in Denmark, Poland, Sweden, Finland, Romania and the People’s Republic of China
• 13 sales companies worldwide
• Joint ventures in the United Arab Emirates and the Republic of Korea
• Distributors in 28 countries on all continents
• 1,400 employees
• Annual turnover in excess of EUR 300 million
We invented the pre-insulated pipe technology, and have supplied more than
160,000 km of pre-insulated pipe to date, with more than 45 years of experience with fine-tuning every detail.
For information about LOGSTOR’s distinguished history of technical innovation, go to www.logstor.com.

Holland/Belgium
Maas Marine & Industrial Equipment B.V.
Ampérestraat 1a
2952 AA Alblasserdam
Holland
Tel.:
Fax:
+31 78 692 01 80
+31 78 691 83 48
Contact: Mr. Patrick Maas
Spain
Aries Industrial y Naval Servicios, S.A.
C/Guzmán el Bueno, 133, 1ª planta
28003 Madrid
Spain
Tel.:
Fax:
+34 91 533 92 00
+34 91 535 83 80
Contact: Mrs. Maria Pérez
Italy
Westeam s.r.l.
Via Al Santuario
N.S. della Guardia, 22
16162 Genova Bolzaneto
Italy
Tel.:
Fax:
+39 010 749 12 80
+39 010 741 24 05
Contact: Mr. Sante Scoglio
Greece
Oceanking, Technical & Trading Ltd.
31, Bouboulinas Street
18535 Piraeus
Greece
Tel.:
Fax:
+30 210 429 67 74 / 429 72 60
+30 210 429 68 20
Contact: Mr. Apostolos Bekiaris
Cyprus
UMAR SHIPPING SERVICE
Arch. Makariou III
228, St. Paul Bld.
Block B, 4th. Fl.
P.O. Box 58019
3730 Limassol
Cyprus
Tel.:
Fax:
+35 725 35 55 18
+35 725 35 55 19
Contact: Mr. Thrasos A. Tsangarides
Turkey
Antares Denizcilik Ltd. Sti.
Rauf ORBAY Caddesi Gülbeyaz Sok no: 3
34940 Tuzla, Istanbul
Turkey
Tel.:
Fax:
+90 216 395 82 52
+90 216 395 91 21
Contact: Mr. Ibrahim Aydin
Croatia
HOMA MARINE d.o.o.
Glavani 45/B
51221 Kostrena
Croatia
Tel.:
Fax:
+38 551 45 09 09
+38 551 45 23 06
Contact: Mr. Marijan Hodanic
China
Dan Marine (Far East) Limited
Flat B, 28 Floor, Huadu Mansion
838 Zhangyang Road
200122 Pudong, Shanghai
China
Tel.:
Fax:
+86 21 6867 0118
+86 21 6867 1113
+86 21 6867 1115
+86 21 6876 1117
Contact: Mr. Lawrence Wang
Japan
Sojitz Marine & Engineering Corporation
Osaka Office
2F Tradepia Yodoyabashi 5-8
Imabashi 2-chome, Chuo-ku,
Osaka 541-8558
Japan
Tel.:
Fax:
+81 662 09 35 36
+81 662 09 35 32 / 3075
Contact: Mr. Kazushi Konishi
North America
American United Marine Corp.
35 Congress Street
MA 01970, Salem
USA
Tel.:
Fax:
+1 978 741 28 62
+1 978 741 7776
Contact: Mr. Pete Lombard
Russia
Marine Systems & Solutions
58 A,Moika Emb
190000, Saint-Petersburg
Russia
Tel.:
Fax:
+7 812 571 33 44
+7 812 718 84 07
Contact: Mr. Dimitri Ivanov
Germany
Marine & Offshore Equipment GmbH
&Co KG
Röntgenstrasse 6
21465, Reinbek bei Hamburg
Germany
Tel.:
Fax:
+49 406 50 45 60
+49 406 50 45 611
Contact: Mr. Tim Kutscher
Hans C. Andersen
Sales manager
Exec. MBA
Direct tel. +45 1805 1805
Direct fax +45 1805 1805
Mobile +45 7622 2222 hca@logstor.com
Office
Nordre Kobbelvej 10
DK-7000 Fredericia
LOGSTOR A/S
Danmarksvej 11
DK-9670 Løgstør
Denmark
Tel. +45 9966 1000
Fax +45 9966 1180 logstor@logstor.com www.logstor.com

LOGSTOR A/S
Danmarksvej 11 · DK-9670 Løgstør
Tel. +45 9966 1000 · Fax +45 9966 1180 logstor@logstor.com · www.logstor.com