Bibliografı́a
[1] C. Chan, “The state of the art of electric and hybrid vehicles,” Proceedings of the
IEEE, vol. 90, no. 2, pp. 247–275, 2002.
[2] I. Alacalá, A. Claudio, y G. Guerrero, “Analysis of propulsion systems in electric
vehicles,” 2nd International Conference on Electrical and Electronics Engineering,
ICEEE, pp. 309–313, Set. 2005.
[3] C. Chan y Y. Wong, “The state of the art of electric vehicles technology,” 4th International Power Electronics and Motion Control Conference, IPEMC, vol. 1, pp.
46–57, Ago. 2004.
[4] Organización Mundial de la Salud (OMS), “Informe sobre la salud en el mundo,”
2008.
[5] C. Chan, “The state of the art of electric, hybrid, and fuel cell,” Proceedings of the
IEEE, vol. 95, no. 4, pp. 704–718, Set. 2007.
[6] F. Cortés, F. Barrero, S. Toral, J. Prieto, y J. Guevara, “Multi-sensor integration
in the vehicular system using the IEEE1451 std.: A case study,” 12th International
IEEE Conference on Intelligent Transportation Systems, ITSC, pp. 1–6, Oct. 2009.
[7] J. Flink, “America adopts the automobile,” Cambridge University Press, pp. 166–169,
1910.
[8] E. Ward y H. Härer, “Preliminary investigation of a invertor-fed 5-phase induction
motor,” Proceedings of the Institution of Electrical Engineers, vol. 116, pp. 980–984,
Jun. 1969.
126
Bibliografı́a
[9] E. Levi, “Multiphase electric machines for variable-speed applications,” IEEE Transactions on Industrial Electronics, vol. 55, no. 5, pp. 1893–1909, May. 2008.
[10] E. Levi, R. Bojoi, F. Profumo, H. Toliyat, y S. Williamson, “Multiphase induction
motor drives – a technology status review,” IET Electric Power Applications, vol. 1,
no. 4, pp. 489–516, 2007.
[11] M. Abbas, R. Christen, y T. Jahns, “Six–phase voltage source inverter driven induction motor,” IEEE Transactions on Industry Applications, vol. IA–20, no. 5, pp.
1251–1259, Set. 1984.
[12] K. Pavithran, R. Parimelalagan, y M. Krishnamurthy, “Studies on inverted–fed five–
phase induction motor drive,” IEEE Transactions on Power Electronics, vol. 3, no. 2,
pp. 224–235, Abr. 1988.
[13] K. Gopakumar, S. Sathiakumar, S. Biswas, y J. Vithayathil, “Modified current source
inverter fed induction motor drive with reduced torque pulsations,” IEE Proceedings
Electric Power Applications, vol. 131, no. 4, pp. 159–164, Jul. 1984.
[14] J. Dente y F. Labrique, “Induction motor–current source inverter systems with phase
number greater than 3,” Proceedingns European Power Electronics and Applications
Conference, EPE, pp. 3143–3147, 1985.
[15] U. Mupambireyi, N. V. Schouten, B. Gordon, y R. McMahon, “High phase number
induction motor drives for battery applications,” Eighth International Conference on
Power Electronics and Variable Speed Drives, pp. 229–234, Set. 2000.
[16] A. Iqbal y E. Levi, “Space vector schemes for a five–phase votage source inverter,”
European Conference on Power Electronics and Applications, EPE, pp. 12pp.–P.12,
2005.
[17] P. C. Krause, O. Wasynczuk, y S. D. Sudhoff, Analysis of Electric Machinery
And Drive Systems, 2nd ed., ser. IEEE Press Power Engineering Series.
Interscience, 2002.
127
Wiley–
Bibliografı́a
[18] J. Dente, “Squirrel–cage induction motor with electronic commutation,” International Conference on Evolution and Modern Aspect of Induction Machines, pp. 596–599,
Jul. 1986.
[19] D. Gosden, “An inverter–fed squirrel cage induction motor with quasi–rectangular
flux distribution,” Electric Energy Conference, pp. 240–245, Oct. 1987.
[20] H. Toliyat, T. Lipo, y J. White, “Analysis of a concentrated winding induction machine for adjustables speed drive applications part 1 (motor analysis),” IEEE Transactions on Energy Conversion, vol. 6, no. 4, pp. 679–683, Dic. 1991.
[21] H. Toliyat, T. Lipo, y J. White, “Analysis of a concentrated winding induction machine for adjustables speed drive applications part 2 (motor design and performance),”
IEEE Transactions on Energy Conversion, vol. 6, no. 4, pp. 684–692, Dic. 1991.
[22] L. Pereira, C. Sharlau, L. Pereira, y J. Haffner, “General model of a five–phase
induction machine allowing for harmonics in the air gap field,” IEEE Transactions
on Energy Conversion, vol. 21, no. 4, pp. 891–899, Dic. 2006.
[23] L. Pereira, C. Sharlau, L. Pereira, y J. Haffner, “Model of a five–phase induction
machine allowing for harmonics in the air–gap field. part i: Parameter determination and general equations,” 30th Annual Conference of IEEE Industrial Electronics
Society, IECON, vol. 1, pp. 98–103, Nov. 2004.
[24] L. Pereira, C. Sharlau, L. Pereira, y J. Haffner, “Model of a five–phase induction
machine allowing for harmonics in the air–gap field. part ii: Transformation of co–
ordinates and d–q models,” 30th Annual Conference of IEEE Industrial Electronics
Society, IECON, vol. 2, pp. 1682–1687, Nov. 2004.
[25] A. Iqbal, E. Levi, M. Jones, y S. Vukosavic, “Generalised sinusoidal PWM with
harmonic injection for multi–phase VSIs,” 37th IEEE Power Electronics Specialists
Conference, PESC, pp. 1–7, Nov. 2006.
[26] D. Dujic, M. Jones, y E. Levi, “Continuous carrier–based vs. space vector PWM for
five–phase VSI,” The International Conference on Computer as a Tool, EUROCON,
pp. 1772–1779, Set. 2007.
128
Bibliografı́a
[27] D. Dujic, E. Levi, M. Jones, G. Grandi, G. Serra, y A. Tani, “Continuous PWM techniques for sinusoidal voltage generation with seven–phase voltage source inverters,”
IEEE Power Electronics Specialists Conference, PESC, pp. 47–52, Jun. 2007.
[28] D. Dujic, G. Grandi, M. Jones, y E. Levi, “A space vector PWM scheme for multifrequency output voltage generation with multiphase voltage source inverters,” IEEE
Transactions on Industrial Electronics, vol. 55, no. 5, pp. 1943–1955, May. 2008.
[29] A. Lega, M. Mengoni, G. Serra, A. Tani, y L. Zarri, “Space vector modulation for
multiphase inverters based on a space partitioning algorithm,” IEEE Transactions
on Industrial Electronics, vol. 56, no. 10, pp. 4119–4131, Oct. 2009.
[30] G. Liliang y J. Fletcher, “A space vector switching strategy for three–level five–
phase inverter drives,” IEEE Transactions on Industrial Electronics, vol. 57, no. 7,
pp. 2332–2334, Jul. 2010.
[31] O. López, J. Álvarez, J. Doval-Gandoy, y F. Freijedo, “Multilevel multiphase space
vector PWM algorithm,” IEEE Transactions on Industrial Electronics, vol. 55, no. 5,
pp. 1933–1942, May. 2008.
[32] O. López, J. Álvarez, J. Doval-Gandoy, y F. Freijedo, “Multilevel multiphase space
vector PWM algorithm with switching state redundancy,” IEEE Transactions on
Industrial Electronics, vol. 56, no. 3, pp. 792–804, Mar. 2009.
[33] O. López, D. Dujic, M. Jones, F. Freijedo, J. Doval-Gandoy, y E. Levi, “Multidimensional two–level multiphase space vector PWM algorithm and its comparision
with multifrequency space vector PWM method,” Forthcoming IEEE Transactions
on Industrial Electronics, vol. PP, no. 99, pp. 1–1, 2010.
[34] K. Takahashi, K. Ohishi, y T. Kanmachi, “A new quick–response and high–efficiency
control strategy of an induction motor,” IEEE Transactions on Industry Applications,
vol. IA–22, no. 5, pp. 820–827, Set. 1986.
[35] M. Depenbrock, “Direct self–control DSC of inverter–fed induction machine,” IEEE
Transactions on Power Electronics, vol. 3, no. 4, pp. 420–429, Oct. 1988.
129
Bibliografı́a
[36] H. Toliyat y H. Xu, “A novel direct torque control (DTC) method for five–phase
induction machines,” Fifteenth Anual IEEE Applied Power Electronics Conference
and Exposition, APEC, vol. 1, pp. 162–168, Feb. 2000.
[37] H. Xu, H. Toliyat, y L. Petersen, “Five–phase induction motor drives with DSP–
based control system,” IEEE International Electric Machines and Drives Conference,
IEMDC, pp. 304–309, Jun. 2001.
[38] R. Bojoi, F. Farina, G. Griva, F. Profumo, y A. Tenconi, “Direct torque control for
dual three-phase induction motor drives,” IEEE Transactions on Industry Applications, vol. 41, no. 6, pp. 1627–1636, Nov. 2005.
[39] K. Hatua y V. Ranganathan, “Direct torque control schemes for split-phase induction
machine,” IEEE Transactions on Industry Applications, vol. 41, no. 5, pp. 1243–1254,
Set. 2005.
[40] Y. Gao y L. Parsa, “Modified direct torque control of five–phase permanent magnet
synchronous motor drives,” Twenty Second Annual IEEE Applied Power Electronics
Conference, APEC, pp. 1428–1433, Mar. 2007.
[41] G. Liliang, J. Fletcher, y Z. Libo, “Low speed control improvements for a 2–level
5–phase inverter–fed induction machine using classic direct torque control,” IEEE
International Symposium on Industrial Electronics, ISIE, Jul. 2010.
[42] P. Cortés, M. Kazmierkowski, R. Kennel, D. Quevedo, y J. Rodrı́guez, “Predictive
control in power electronics and drives,” IEEE Transactions on Industrial Electronics,
vol. 55, no. 12, pp. 4312–4324, Dic. 2008.
[43] F. Barrero, M. Arahal, R. Gregor, S. Toral, y M. Duran, “A proof of concept study
of predictive current control for VSI–driven asymmetrical dual three-phase AC machines,” IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 1937–1954,
Jun. 2009.
[44] M. Arahal, F. Barrero, S. Toral, M. Duran, y R. Gregor, “Multiphase current control
using finite–state model–predictive control,” Control Engineering Practice, vol. 17,
no. 5, pp. 579–587, 2009.
130
Bibliografı́a
[45] F. Barrero, M. Arahal, R. Gregor, S. Toral, y M. Duran, “One–step modulation
predictive current control method for the asymmetrical dual three–phase induction
machine,” IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 1947–1983,
Jun. 2009.
[46] R. Gregor, F. Barrero, S. Toral, M. Duran, M. Arahal, J. Prieto, y J. Mora,
“Predictive-space vector PWM current control method for asymmetrical dual threephase induction motor drives,” IET Electric Power Applications, vol. 4, no. 1, pp.
26–34, 2010.
[47] A. Iqbal, H. Abu-Rub, P. Cortés, y J. Rodriguez, “Finite control set model predictive current control of a five–phase voltage source inverter,” IEEE International
Conference on Industrial Technology, ICIT, pp. 1787–1792, Mar. 2010.
[48] H. Miranda, P. Cortés, J. Yuz, y J. Rodrı́guez, “Predictive torque control of induction
machines based on state-space models,” IEEE Transactions on Industrial Electronics,
vol. 56, no. 6, pp. 1916–1924, Jun. 2009.
[49] J. Prieto, J. Riveros, B. Bogado, F. Barrero, S. Toral, y P. Cortés, “Electric propulsion technology based in predictive direct torque control and asymmetrical dual
three–phase drives,” 13th International IEEE Conference on Intelligent Transportation Systems, ITSC, Set. 2010.
131