Ford Fusion
2006-09 Mercury
Milan
About the Vehicle
Make: Ford
Model: Fusion
Year: 2006-09
OPTIONS
MP3-compatible CD
Audio controls on the steering wheel
Audiophile 8 Speaker System
In-Dash 6 CD Changer
Speaker Notes
In Dash Application
Dash Type:
Kit:
Harness:
Antenna Adapter:
Double DIN
FD1432AB
FDSR
CRAB/CRARB
Front
Speaker Sizes
Upper Door:
1'' Tweeter
Lower Door:
6X8” Midrange
Speaker Adapter: SA68
Speaker Harness: TBA
Factory Assembly: (4) T-15 Torx screws securing
speaker.
NOTES
Dimensions:
W= 4 7/8''
L= 6 3/4''
D= 3 5/8''
Rear
Wire Color Codes
+12V Constant = Blue/Red
+12v Acc. Switched = DATA
Rear Door :
6x8'' Midrange
Rear Deck:
6x9'' in rear deck (w/Premium)
Speaker Adapter: SA68
Factory Assembly: (4) T-15 Torx screws securing
speaker.
-12V Chassis Ground = Black/Blue
+12V Illumination = DATA
NOTES
+12V Dimmer = DATA
Amp Remote = Yellow/Violet
LF+ = White
LF- = White/Brown
RF+ = White/Violet
RF- = White/Orange
LR+ = Brown/Green
LR- = Brown/Yellow
RR+= Brown/White
RR- = Brown/Blue
Speaker Sizes
Dimensions:
W= 4 7/8''
L= 6 3/4''
D= 4 3/8''
Ford Fusion
2006-09 Mercury
Milan
Images
Radio removal
Radio
1. Using a panel removal tool remove the trim
around the radio.
2. Remove the (4) 7mm screws holding the
radio in place. Disconnect and remove
Front Speaker
1. Extract (2) T15 torx surrounding the
perimeter of the door panel.
2. Extract (1) 7mm hex screw located in the
door handle pocket. Lift away disconnect and
remove.
3. Extract (1) T15 torx located in the door
handle release cup.
4. Using a PRT unsnap the perimeter of the
door panel. Lift away disconnect and remove.
5. Unsnap tweeter pod from door using a PRT.
Lift away disconnect and remove.
6. Extract (4) T15 torx securing factory speaker.
Lift away disconnect and remove.
Front Speaker
Rear Speaker
1. Extract (1) T15 torx surrounding the
perimeter of the door panel.
2. Extract (1) 7mm hex screw located in the
door handle pocket. Lift away disconnect and
remove.
3. Extract (1) T15 torx located in the door
handle release cup.
4. Using a PRT unsnap the perimeter of the
door panel. Lift away disconnect and remove.
5. Extract (4) T15 torx securing factory speaker.
Lift away disconnect and remove.
Rear
Tweeter
1. Unsnap tweeter pod from door using a PRT.
Lift away disconnect and remove.
Tweeter Removal