Configuration Code PL12
Spade Thermocouples and RTDs
Plastic
The temperature sensors illustrated below are generally used for surface temperature measurement. The series SS and ST spade
thermocouples are sandwiched between two thin shims of either stainless steel or two pieces of fiberglass tape. They can be attached using a
worm drive hose clamp or by placing under heater bands. These spades can be formed and secured to the outside of various size tubes, pipes,
or nozzles. The SK series sensors are sealed in epoxy between two layers of polyimide tape and are provded with an adhesive backing for easy
attachment to many surfaces. The SK series sensors are available in various thermocouple types or RTDs. The RTDs are constructed using a
100 Ω platinum element with a temperature coefficient of 0.003 85 °C-1 (IEC Class B).
B
1 3/16"
B
1"
1"
1"
B
1"
1"
ORDER CODES
2
1
JSS -
Example Order Number:
1
Thermocouple Type
CODE
2
DESCRIPTION
3
F1B036
- 3
Extension Leadwire "B"
CODE[1]
F1_ _ _
DESCRIPTION
PYROMATION P/N: JSS-F1B06-3
Fiberglass
insulation - solid conductor
JSS
Stainless steel spade
Fiberglass
insulation - solid conductor
Flexible fiberglass spade 204 °C [400 °F]
F1B _ _ _
JST
SPEC NO:
stainless
steel
overbraid
max
FOR:
PYROMATION, INC.
F3_ _ _
Fiberglass insulation - stranded conductor
Flexible Polyimide spade with adhesive
TITLE:
SPEC NO:
JSK[1]
PYROMATION P/N: JS
CATALOG
PAGEinsulation
PL-15, FIGURE
A TOLERANCES
tape backing 204 °C [400 °F]
Fiberglass
- stranded
conductor
F3B _ SIZE:
__
DWG. NO. & SHEET NO: FRACTIONREV.
=
DIM
- stainless steel overbraid
Nominal spade thickness is 0.020" min to 0.090"
DECIMAL DIM .XX =
TOLERANCES
DECIMAL
DIM conductor
.XXX =
max
T1 _ _ _
Fluoropolymer insulation
- solid
= ±1/32"
FRACTION DIM
=
DRAWN BY:
DATE:
ANGULAR DIM
FOR:
Other Element Types
4/11/2011
J.Fluoropolymer
BROWN
DECIMAL DIM .XX = ±0.010"
insulation
-This
stranded
INC
document isPYROMATION,
PROPRIETARY to
T3
_
_
_
Pyromation, Inc.
DECIMAL DIM .XXX = ±0.005"
TITLE:
SPEC NO:
conductor
DIM J in= ±2°
For type E, K, or T thermocouples,ANGULAR
replace
CATALOG PAGE PL-15, F
This document is PROPRIETARY toK1 _ _ _
Polyimide insulation - solid
conductor
order code with required letter designation.
DWG. NO. & SHEET
SIZE:
A
Pyromation, Inc.
[1] Not available with Fiberglass leadwire.
1a
RTD Type 100 Ω Platinum A = 0.003 85 °C
CODE
RBF1852SK 2 wire
-1
Flexible polyimide
spade with
adhesive tape
backing 204 °C
[400 °F]
Flexible polyimide
spade with
adhesive tape
backing 204 °C
[400 °F]
Nominal spade thickness is 0.060" min to 0.100"
max
150-9
FORT WAYNE, INDIANA
260-484-2580
A
[1] Insert TOLERANCES
3 digit "B" length in inches.
EX:
F3B024=24"
= "B" length.
FRACTION DIM
DRAWN
DIM .XX =
3 DECIMAL
Terminations
and Options
ELEMENT
DESCRIPTION
CONNECTION
RBF1853SK 3 wire
B268501
BY:
B26870
DATE:
J. BROWN
4/
DECIMAL DIM .XXX =
=
ANGULAR DIM
CODE DESCRIPTION
is PROPRIETARY to
0 This document
Leads
notInc.
stripped
FORT
Pyromation,
2
2" split leads, 1/4" stripped
3
2" split leads with spade lugs
4
Standard plug
WAYNE, INDIANA
5
Standard jack
6
7
Miniature plug
Miniature jack
8
2" split leads with 1/4" female disconnects
Options
MC
Mating connector
CC
Cable clamp
BX
Box connector
Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com
PL-15
2