Potentiometers
CA6
CA9 // CE9
CA14 // CE14
MCA9 // MCE9
MCA14 // MCE14
| www.acptechnologies.com | 13
CA6
Carbon
Potentiometers
CA
14 | www.acptechnologies.com |
CA6
6mm carbon potentiometers with plastic housing and protection
type IP 5 (dust-proof).
CA6 potentiometers are available both in through-hole and in SMD
terminal configuration. The substrate in our SMD potentiometers is
high temperature resistant, for reflow soldering.
Tapers available include linear, log and antilog, even for SMD potentiometers. ACP can also study special requests.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), which is recommended to hold
the potentiometer to the board prior to the soldering operation.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer. CA6VSMD potentiometers,
with or without thumbwheel, can be requested in Bulk or Tape &
Reel (T&R) packaging.
ACP’s potentiometers can be adjusted from either side, both in the
horizontal and the vertical adjustment types. There is a guide on
the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
- Resistance value.
- Tolerance.
- Tapers / variation laws of the resistive element (linear, log,
antilog).
- Others on request.
- Pitch.
- Positioning of the wiper (the standard is at 50%).
- Housing and rotor color.
- Mechanical life.
- Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Small electronic appliances.
- Measurement and test equipment.
- Automotive: alarms, switches
- Telecommunication equipment (antenna amplifiers and receivers,
videocomm., intercomm.)
- Alarm systems.
| www.acptechnologies.com | 15
CA6
Models
All models shown here have the standard rotor for the 6mm series, the cross (X). Models can be manufactured with any of the rotors listed
on the rotor menu. The color of the housing or rotor can also be modified.
CA6 H2,5
CA6 V 2,5
CA6 V5
CA6 VS5
CA6 HSMD
CA6 VSMD
Rotors
The rotor by default is the cross (X). Accessories are designed for the X rotor.
1,6
+0,05
-0
0,65±0,05
1,5±0,05
0,65±0,05
1,85
+0,07
-0,03
M
N
X
Shafts
6022
6023
18,3
6024
6025
14
17,5
15,2
13
13
Shafts are offered in different colors. On request, they can also be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with shafts already inserted in. ACP can also study special shafts.
6028
6031
Thumbwheels
Thumbwheels are offered in different colors. On request, they can also be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with thumbwheels already inserted in. ACP can also study special thumbwheels.
6001
6030
6032
Terminals
1,6
In the CA6 family, ACP will always recommend terminals with “snap in” in order to better hold the component to the board prior to soldering. (Not available for CA6VS5 model).
0,9
SNP
16 | www.acptechnologies.com |
Complete drawings can be found on pages 76-77
Adjustment possibilities
ACP’s potentiometers can be adjusted through either the front side (WT) or the collector side (WTI):
WTI
WT
WTI
WT
Collector side
Front side
Collector side
Front side
Potentiometers with cut track
The resistive element in this potentiometer has an area with very high resistive values, resulting in an open circuit. Recommended for
lighting regulation.
With cut at the beginning of the track CCW: Off-On.
With cut at the end of track- CW: On-Off. Others positions available on request.
A
A
B
C
B
C
CCW: Off-On
CW: On-Off
Packaging
Bulk packaging: Potentiometers are first bagged and then introduced in boxes:
Potentiometer model
+ Shaft or thumbwheel inserted
Pieces per box (130 x 60 x 90)
- (only potentiometers)
1000
6001, 6030, 6032
1000
6022, 6023, 6024, 6031
500
6025, 6028
300
+ Shaft or thumbwheel reference
Pieces per reel
- (only potentiometers)
1200
6030
750
H2,5 - V2,5 - V5 - VS5 - HSMD - VSMD
Tape and reel (T&R) packaging:
Potentiometer model
VSMD
Dimensions: Reel Ø: 330mm, Tape width: 24mm
Ø
1,75
5
5
1,
2
11,5
2
12
4
Ø1
3
2
2
Ø 330
24
Ø1,2 Ø1,2
Without thumbwheel
6,7
Ø
4,8
1,
5
1,5
30
With thumbwheel
| www.acptechnologies.com | 17
CA6
Electric Specifications
These are standard features; other specifications can always be studied on request.
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Through-Hole
SMD
100Ω … 5MΩ
1 KΩ … 2,2 MΩ
100Ω - 1MΩ
1KΩ - 1MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range:
Rn> 5MΩ: +50% -30%
Tolerance
Special tolerances available on request
Variation laws
< 1MΩ
Lin (A), Log (B), Antilog (C) Other tapers available on request
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
Maximum power dissipation at 40º C.
Lin (A)
No Lin (B, C)
0,10W
0,06W
Maximum voltage at 40ºC
Lin (A)
No Lin (B, C)
100 VDC
60VDC
Operating temperature
Temperature coefficient
-25°C … +70°C
100Ω - 10KΩ Æ +200/ -300 ppm.
>10KΩ - 5MΩ Æ +200/ -500 ppm
Mechanical Specifications
Angle of rotation (mechanical)
Wiper position
Angle of rotation (electrical)
100Ω - 100KΩ Æ +200/ -500 ppm.
>100KΩ - 1MΩ Æ +200/ -1000 ppm.
Test
Through-Hole and SMD
Resistive element
Carbon technology
235º ± 10º
Middle position: 50% ± 15º
215º ± 20º
Test // Conditions // Typical variation of Nominal Resistance
Damp heat // 500 h. at 40°C and 95% RH // +5%; -2%
Thermal cycles // 16h at 85ºC, plus 2h at –25ºC // ±2,5%
Load life // 1.000 h. at 40°C // +0%; -5%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±3%
Max. stop torque
4 Ncm
Soldering effect // 2 seconds at 350°C // ±1%
Max. push/pull on rotor
9,8 N
Storage (3 years) // at 23°C ± 2°C // ±3%
Wiper torque
Mechanical life
18 | www.acptechnologies.com |
± 25%
< 2 Ncm
For further information on tests, go to TESTS AND RELIABILITY, on pages 10-11
1000 cycles (more available on request)
All specifications are given at 23°C ± 2°C and 50% ± 25% RH.
| www.acptechnologies.com | 19
CA6 HOW TO ORDER
EXAMPLE: CA6XV2,5-10KA2020 SNP PI WT6030-BA-V0
Standard features
Assembled accessory
Extra features
Series
Rotor
Model
1
2
3
CA6
X
V2,5
Packg Ohm value Taper
Tol
Life
Track
5
6
7
8
9
-10K
A
2020
4
Terminals Housing
10
Rotor Wiper position
11
12
SNP
Assembly
Ref #
Color
Flam.
14
13
WT
PI
15
6030
-BA
-V0
Standard configuration
Customized products
Dimensions:
Protection:
Resistance:
Color:
Packaging:
Wiper position:
Terminals:
Marking:
A drawing is requested to order a customized product. The code assigned will
include all special specifications.
6mm
IP 5 (dust proof)
Carbon technology
Blue housing with white rotor
Bulk
at 50% ± 15º
Snap in P strongly recommended
Resistive value marked on housing; others on request.
Series, rotor, model and total resistive value are given before the special code:
CA6XV5-10K CODE C00111
2 - Rotors
1 - Series
X (Standard)
CA6
3 - Model and pitch
H2,5
M
N
4 - Packaging
V2,5
V5
VS5
HSMD
VSMD
Bulk -standardT&R (Tape and reel)
Through-hole
SMD models
(blank)...
(blank)…
(N.A.)(1)
-T&R
(1) N.A. - Not Available: Tape and Reel packaging is only available for VSMD model.
6 - Resistance law / taper
5 - Resistance value
Through-hole
Taper:
Value Rn
Lin - Linear
SMD
Lin (A)
Log (B), Antilog (C)
Lin (A)
Log (B), Antilog (C)
100 Ω / 100
…/…
5 MΩ / 5M
1KΩ / 1K
…/…
2,2 MΩ / 2M2
100Ω / 100
…/…
1 MΩ / 1 MΩ
1KΩ / 1K
…/…
1 MΩ / 1M
A
Log - Logarithmic
B
Antilog - Antilogarithmic
C
- Special tapers have codes assigned:
CODE YXXXXX
Other resistive values available on request.
Please, indicate terminal position when ordering a special taper.
7 - Tolerance
8 - Operating life (cycles)
Through-hole models
SMD models
Standard (1000cycles)
(leave blank)
100 Ω ≤ Rn ≤ 1MΩ: ±20%
2020
Long life: LV + the number of cycles. ex: LV06 for 6000 cycles
1 MΩ ≤ Rn ≤ 5MΩ: ±30%
3030
(1) Others on request.
For Rn > 5MΩ, tol : +50% - 30%
5030
(1)
LVXX: ex: LV06
2525
Special tolerances available: <5% ... 10%, etc.
10 - Terminals (Crimped terminals or snap in:)
9 - Cut track
At beginning of track, CCW: Off - On
PCI
Without SNAP IN-
At end of track, CW: On - Off
PCF
With SNAP IN P
11 - Housing color
Standard is blue
With other colors -See color chart below-, for example, red
20 | www.acptechnologies.com |
(leave blank)
SNP
12 - Rotor color
(leave blank)
CJ-color; ex: CJ-RO
Standard is white
With other colors -See color chart below-, for example, red
(leave blank)
RT-color; ex: RT-RO
14 - Potentiometers with assembled accessories
13 - Wiper position
(Standard: at 50% ± 15º)
(leave blank)
Assembled from front side
WT
WTI
Initial or CCW
PI
Assembled from collector side
Final or CW
PF
Accessory Reference
See list of shafts and thumbwheels available
Color of shaft or thumbwheel
XXXX
Example: 6030
-YY
Example, white: -BA
15 - Flammability (according to UL 94 V-0)
Not self-extinguishable
(leave blank)
Self-extinguishable (including all plastic parts of the
potentiometers: rotor, housing and accessory. If only one part
needs to be V0, please, inform)
-V0
For ordering spare accessories
Accessory reference - color- flammability. Ex. 6030-BA-V0 is a white self-extinguishable 6030 thumbwheel
XXXX-YY-_ _
Color chart for rotor, housing and accessories
Black (1)
NE
White
BA
Neutral
IN
Transparent
TA
Red
RO
Green
VE
Yellow
AM
Blue
AZ
Grey
GS
Brown
MR
(1) Black is not available for housings.
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 21
CA9
CE9
Carbon
Cermet
Potentiometers Potentiometers
CA
CE
22 | www.acptechnologies.com |
CA9
9mm carbon potentiometers with plastic housing and protection
type IP 5 (dust-proof).
Standard tapers available include linear, log and antilog. ACP can
also study special requests.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer.
ACP’s potentiometers can be adjusted from either side, both
in the horizontal and the vertical adjustment types. There is a
guide on the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing and rotor color.
Mechanical life.
Pause effect (up to 20 detents available).
Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Electronic appliances: white goods, brown goods, small household appliances.
- Heating and air conditioning equipment and thermostats.
- Automotive: dimmers, climate controls, lighting regulation (position adjustment and sensing).
- Measurement and test equipment. Timers and relays.
- Multimedia.
CE9
9mm Cermet potentiometers with plastic housing and protection type IP 5 (dust-proof). Self-extinguishable according to UL 94
V-0.
Standard taper is linear. Log, Antilog and other tapers are available
on request. Laser trimming equipment in-house, allowing for very
low tolerances.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer.
ACP’s potentiometers can be adjusted from either side, both
in the horizontal and the vertical adjustment types. There is a
guide on the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing and rotor color.
Mechanical life.
Pause effect (up to 20 detents available).
Applications
- Electronic appliances: white goods, brown goods, small household appliances, boilers, water heaters, etc.
- Heating and air conditioning equipment and thermostats.
- Automotive: dimmers, climate controls, lighting sensors.
- Industrial electronics: multimeters, oscilloscopes, test equipment, time relay.
| www.acptechnologies.com | 23
CA9
CE9
Models
All models shown here have the standard rotor for the 9mm series, the arrow (P). Models can be manufactured with any of the rotors listed
on the rotor menu. The color of the housing or rotor can also be modified. SMD configuration can be available on request.
CA9 H2,5
CE9 H2,5
CA9 H3,8
CE9 H3,8
CA9 HS3,8
CE9 HS3,8
CA9 H5
CE9 H5
CA9 V7,5
CE9 V7,5
CA9 V10
CE9 V10
CA9 VR10
CE9 VR10
CA9 MAV10 CA9 MTV10
CE9 MAV10 CE9 MTV10
Rotors
The rotor by default is the arrow (P). Accessories are designed for the M and J rotors, unless otherwise stated.
7,2
7,2
Ø 3,95 -0,1
-0
2,1±0,1
Ø 3,95 -0,1
-0
2±0,05
2±0,05
0,8±0,05
6
MT
MA
0,8±0,05
0,8±0,05
2,4±0,1
1,5±0,05
2,1±0,1
0,8±0,05
2±0,05
PA
P
Ø 2±0,05
2±0,1
2±0,05
J
R
Y
D
M
Shafts
13,9
13,9
9005
9006
9009
9018
9039
9047
9048
For 2 potentiometers
9053
For 4 potentiometers
24 | www.acptechnologies.com |
9054
9055
9056
9059
9063
15,3
18,4
18,4
14,9
13,4
16,1
57
33,5
For 6 potentiometers For 4 potentiometers
9051
25
33,4
33,3
48,3
19,1
9010
9064
10,8
9004
• CE9. Shafts in accordance with UL 94 V-0 are available in
different colors.
Potentiometers can be supplied with shafts already inserted in.
ACP can also study special shafts.
18,4
23,4
• CA9. Shafts are available in different colors. On request, they can
also be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with shafts already inserted in.
ACP can also study special shafts.
9067
For 8 potentiometers
Complete drawings can be found on pages 78-80
Thumbwheels
• CA9. Thumbwheels are available in different colors. On request,
they can also be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with thumbwheels already inserted
in. ACP can also study special requests for thumbwheels.
9002
• CE9. Thumbwheels in accordance with UL 94 V-0 are available
in different colors.
Potentiometers can be supplied with thumbwheels already inserted
in. ACP can also study special requests for thumbwheels.
9041
9060
9061
For R rotor
Terminals
1,62
1,6
By default, terminals are always straight for the 9mm size, as shown on the “models” menu.
ACP can provide crimped terminals (with “snap in”), to better hold the component to the board prior to soldering.
0,9
SNP
1,1
SNJ
Adjustment possibilities
ACP’s potentiometers can be adjusted through either the front side (WT) or the collector side (WTI):
WTI
WT
WTI
WT
Collector side
Front side
Collector side
Front side
Potentiometers with detents
ACP’s “detent” feature (DT) is specially suitable for control applications. Our patented design has improved the features of these potentiometers:
- Longer mechanical life: up to 10.000 cycles.
- More stable electrical parameters.
- Improved reliability and Contact Resistance Variation (CRV).
- Narrower tolerances for detent positioning.
Detents can be lighter or stronger, or even a combination of both feelings. Detents can be evenly distributed along the angle (standard), or
tailored to match customers’ request. They can also be combined with special tapers: constant value areas, different slopes, etc.
Examples: 4, 6 and 20 detents –evenly distributed–.
E
E
E
10
48º
DETAIL
6
4DT
Complete drawings can be found on pages 78-80
1
DETAIL
20
0º
0°
1
6DT
1
0°
24
24
4
-12,6°
80°
DETAIL
24
20DT
| www.acptechnologies.com | 25
CA9
CE9
Potentiometers with cut track
The resistive element in this potentiometer has an area with very high resistive values, resulting in an open circuit. Recommended for
lighting regulation.
With cut at the beginning of the track CCW: Off-On.
With cut at the end of track CW: On-Off. Other positions available on request.
A
A
B
C
B
C
CCW: Off-On
CW: On-Off
Assemblies of several potentiometers
STACKING: Set of 6 potentiometers in a plastic cover. It is used to
speed up assembly and soldering process.
10
66
10
10
10
7
8
4,3
6,9
10
13,3
8
GANGED: Set of potentiometers in a row that allows for simultaneous adjustment of all of them through one shaft. Recommended
potentiometer model is H2,5. MTX2 (2 potentiometers), MTX4 (4),
MTX6 (6), MTX8 (8).
MTX8
MTX6
4,2
=
2,5
=
1,3
2,5
5
10
10
10
5
10
MTX4
MTX2
3,2
10
Packaging
Bulk packaging: Potentiometers are first bagged and then introduced in boxes:
Potentiometer model
+ Shaft or thumbwheel inserted
Pieces per box (130 x 60 x 90)
- (only potentiometers)
500 (models with * : 450)
9002
250
9004, 9005, 9006, 9009, 9010, 9018, 9039, 9041,
9047, 9048, 9051, 9056, 9059, 9053, 9054, 9055,
9060, 9061,9063, 9064, 9067
200
MTX2
9048
150
MTX4
9039, 9051
75
MTX6
9018
50
MTX8
9056
40
STACKING
-
50
H2,5 - H3,8 - H5 - HS3,8 - V7,5 - V10 - VR10
MAV10* - MTV10*
Tape and reel (T&R) packaging will be available for SMD configurations, on request.
26 | www.acptechnologies.com |
CA9. Electric Specifications
CE9. Electric Specifications
These are standard features; other specifications can always be studied on request.
These are standard features; other specifications can always be studied on request.
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Range of resistance values
Lin (A)
Log (B) Antilog (C)
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Tolerance
Special tolerances available on request
Lin (A), Log (B), Antilog (C)
Other tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Tolerance
Special tolerances available on request
Lin (A)
Log (B), Antilog (C) and other
tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
Maximum power dissipation at 40º
50º C.
Lin (A)
Non Lin (B, C)
0,15W
0,10W
Maximum power dissipation at 40º
70º C.
Lin (A)
Non Lin (B, C)
0,5W
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
200VDC
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
200VDC
150VDC
Operating temperature
-25°C … +70°C
Operating temperature
-40°C … +125°C
Temperature coefficient
100Ω - 10KΩ Æ +200/ -300 ppm.
>10KΩ - 5MΩ Æ +200/ -500 ppm
Temperature coefficient
±100ppm.
Note 1: Value depends on taper, please, inquire.
CA9. Mechanical Specifications
Resistive element
CE9. Mechanical Specifications
Carbon technology
Angle of rotation (mechanical)
240º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
220º ± 20º
Max. stop torque
5 Ncm
Max. push/pull on rotor
40 N
< 2 Ncm
(0,4 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
1000 cycles (more available on request)
(up to 10.000 cycles for pots. with detents)
CA9. Test
Resistive element
Cermet technology
Angle of rotation (mechanical)
240º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
220º ± 20º
Max. stop torque
5 Ncm
Max. push/pull on rotor
40 N
< 2 Ncm
(0,4 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
1000 cycles (more available on request)
(up to 10.000 cycles for pots. with detents)
CE9. Test
Test // Conditions // Typical variation of Nominal Resistance
Test // Conditions // Typical variation of Nominal Resistance
Damp heat // 500 h. at 40°C and 95% RH // +5%; -2%
Damp heat // 500 h. at 40°C and 95% RH // ±2%
Thermal cycles // 16h at 85ºC, plus 2h at –25ºC // ±2,5%
Thermal cycles // 16h at 90ºC, plus 2h at –40ºC // ±2%
Load life // 1.000 h. at 40°C
-5%
50º C // +0%;
+2%; -8%
Load life // 1.000 h. at 70°C // ±2%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±3%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±2%
Soldering effect // 2 seconds at 350°C // ±1%
Soldering effect // 2 seconds at 350°C // ±1%
Storage (3 years) // at 23°C ± 2°C // ±3%
Storage (3 years) // at 23°C ± 2°C // ±3%
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
All specifications are given at 23°C ± 2°C and 50% ± 25% RH.
| www.acptechnologies.com | 27
CA9
CE9 HOW TO ORDER
• EXAMPLE: CA9MH2,5-10KA2020 SNP PI WT9005-BA-V0
• EXAMPLE: CE9MH2,5-10KA2020 SNP PI WT9005-BA-V0
Standard features
Series
Rotor
Extra features
Model Packg Ohm value Taper
1
2
3
CA9/CE9
M
H2,5
4
Tol
Life
8
5
6
7
-10K
A
2020
Assembled accessory
Track Detents Snap in Housing Rotor
9
10
11
12
Wiper
Lin
14
15
13
SNP
Assembly Ref #
Color
Flam.
-BA
-V0
16
PI
WT
17
9005
Standard configuration
Customized products
Dimensions:
Protection:
A drawing is requested to order a customized product. The code assigned will
include all special specifications.
Substrate:
Color:
Packaging:
Wiper position:
Terminals:
Marking:
9mm
• CA9: IP 5 (dust-proof)
• CE9: IP-5 (dust-proof) Self-extinguishable, to meet UL 94 V-0
• CA9: Carbon technology
• CE9: Cermet
• CA9: Blue housing with white rotor
• CE9: Brown housing with white rotor
Bulk
at 50% ±15º
Straight, without SNAP IN
Resistive value marked on housing. Others on request
2 - Rotors
1 - Series
• CA9
Series, rotor, model and total resistive value are given before the special code:
CA9PH2,5 10K CODE C00111.
P (standard)
• CE9
H3,8
V10
R
Y
D
M
MA
MT
J
4 - Packaging
3 - Model and pitch
H2,5
PA
H5
VR10
HS3,8
MAV10
V7,5
MTV10
Through-hole
Bulk
HSMD and VSMD models can be available on request.
T&R (Tape and reel)
(blank)…
SMD models
(1)
On request
(N.A.) (2)
On request
(1) If blank, bulk packaging is implied.
(2) N.A. - Not Available: Tape and Reel packaging is only available for SMD terminals.
5 - Resistance value
6 - Resistance law / taper
Taper:
Value Rn
Lin (A)
Log (B), Antilog (C)
100 Ω / 100
…/…
5 MΩ / 5M
1KΩ / 1K
…/…
2,2 MΩ / 2M2
Other resistive values available on request.
Lin - Linear
A
Log - Logarithmic
B (on request for CE)
Antilog - Antilogarithmic
C (on request for CE)
- Special tapers have codes assigned:
CODE YXXXXX
Please, indicate terminal position when ordering a special taper.
8 - Operating life (cycles)
7 - Tolerance
100 Ω ≤ Rn ≤ 1MΩ: ±20%
2020
Standard (1000cycles)
(leave blank)
1 MΩ ≤ Rn ≤ 5MΩ: ±30%
3030
Long life: LV + the number of cycles. ex: LV10 for 10000 cycles
For out of range values: Rn > 5MΩ, tol : +50% - 30%
5030
(1) Others on request.
(1)
LVXX: ex: LV10
Special tolerances available: <5% ... 10%, etc.
9 - Cut track
10 - Detents (DT)
At beginning of track, CCW: Off - On
PCI
One detent at the beginning: CCW
At end of track, CW: On - Off
PCF
One detent at the end: CW
X number of detents. Ex., 10
DTI
DTF
XDT: 10DT
Detents readily available: 3, 4, 6, 7, 9, 10, up to 20 –evenly distributed along 240º±5º. Others on request.
11 - Crimped terminals (SNAP IN)
12 - Housing color
SNAP IN P
SNP
• CA9: standard is blue
SNAP IN J
SNJ
• CE9: standard is brown
With other colors -see color chart below-, for example, red
28 | www.acptechnologies.com |
CJ-color, ex: CJ-RO
13 - Rotor color
14 - Wiper
Standard is white
Wiper position (Standard is at 50% ± 15º)
With other colors -see color chart below-, for example, red
RT-color; ex: RT-RO
(leave blank)
Initial or CCW
PI
Final or CW
PF
Others: following clock positions; at 3hours: P3H
PXH, ex: P3H
Wiper torque (Standard: <2 Ncm)
(leave blank)
Low torque (< 1.5Ncm)
PGB
16 - Potentiometers with assembled accessories
15 - Linearity
Independent linearity controlled & below x%, for example, 3%: LN3%
LNx%; ex: LN3%
Absolute linearity controlled & below x%
LAx%
Assembled from front side
WT
Assembled from collector side
WTI
Accessory Reference
See list of shafts and thumbwheels available
Color of shaft or thumbwheel
XXXX
Example: 9005
-YY
Example, white: BA
17 - Flammability (according to UL 94 V-0)
• CA9: Not self-extinguishable
(leave blank)
Self-extinguishable according to standard UL 94
(including all plastic parts of the potentiometer: rotor, housing and
accessory. If only one part needs to be V0, please, inform)
-V0
• CE9: All accessories assembled with cermet potentiometers will
have the self-extinguishable property according to standard UL 94
-V0
For ordering spare accessories
Accessory reference - color- flammability. Ex. 9005-AZ-V0 is a blue self-extinguishable 9005 thumbwheel
XXXX-YY-_ _
For ordering special sets of potentiometers
STACKING
STK + … (POTENTIOMETER CODE)
Example: STK+CA9MH2,5-10KA2020 (1)
GANGED
MTX + (number of potentiometers: 2, 4, 6, 8) + … (POT. CODE + ASSEMBLED SHAFT CODE)
Example: MTX4+CA9PH2,5-10KA2020 WT9051-BA (1)
(1) Note: If not all potentiometers in the set are identical, please, order potentiometers separately and indicate assembly order.
Color chart for rotor, housing and accessories
Black (1)
NE
White
BA
Neutral
IN
Transparent
TA
Red
RO
Green
VE
Yellow
AM
Blue
AZ
Grey
GS
Brown
MR
(1) Black is not an option for housings.
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 29
CA14
Carbon
Potentiometers
CA
CE14
Cermet
Potentiometers
CE
30 | www.acptechnologies.com |
CA14
CE14
14mm carbon potentiometers with plastic housing and protection
type IP 5 (dust-proof).
14mm cermet potentiometers with plastic housing and protection
type IP 5 (dust-proof). Self-extinguishable according to UL 94 V-0.
Standard tapers available include linear, log and antilog. ACP can
also study special requests.
Standard taper is linear. Log, Antilog and other tapers are available
on request. Laser trimming equipment in-house, allowing for very
low tolerances.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer.
ACP’s potentiometers can be adjusted from either side, both in the
horizontal and the vertical adjustment types. There is a guide on
the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of
possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (standard is at 50%).
Housing and rotor color.
Mechanical life.
Pause effect (up to 38 detents available).
Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Electronic appliances: white goods, brown goods, small household appliances
- Heating and air conditioning equipment and thermostats.
- Automotive: dimmers, climate controls, lighting regulation (position adjustment and sensing).
- Measurement and test equipment.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Thumbwheels and shafts can be provided either separately or
already inserted in the potentiometer.
ACP’s potentiometers can be adjusted from either side, both in the
horizontal and the vertical adjustment types. There is a guide on
the housing to simplify the manual adjusting operations.
Our potentiometers can be manufactured in a wide range of
possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing and rotor color.
Mechanical life.
Pause effect (up to 38 detents available).
Applications
- Electronic appliances: white goods, brown goods, small house
hold appliances, boilers, water heaters, etc.
- Heating and air conditioning equipment and thermostats.
- Automotive: dimmers, climate controls, position sensors.
- Industrial electronic: multimeters, oscilloscopes, test equipment,
time relay.
| www.acptechnologies.com | 31
CA14
CE14
Models
All models shown here have the standard rotor for the 14mm series, the arrow (P). Models can be manufactured with any rotor listed on
the rotor menu. The color of the housing or rotor can also be modified. SMD configuration can be available on request.
CA14 H0
CE14 H0
CA14 HC0
CE14 HC0
CA14 H2,5
CE14 H2,5
CA14 H4
CE14 H4
CA14 H5
CE14 H5
CA14 VA12,5
CE14 VA12,5
CA14 VL12,5
CE14 VL12,5
CA14 VR12,5
CE14 VR12,5
CA14 V15
CE14 V15
CA14 HA5
CE14 HA5
CA14 V15…CFF CA14 V17,5
CE14 V15…CFF CE14 V17,5
CA14 HL5
CE14 HL5
CA14 V12,5
CE14 V12,5
CA14 VD7,5
CE14 VD7,5
CA14 VD11
CE14 VD11
Rotors
The rotor by default is the arrow (P). Accessories are designed for the N, Z and T rotors, unless otherwise stated.
3,08±0,05
2,6±0,05
4,05±0,05
3,6±0,05
3,55±0,05
1,1±0,05
3,62±0,05
4±0,05
1±0,1
3,08±0,05
4,05±0,05
4,1±0,05
4,08±0,05
P
M
N
Z
D
E
T
Shafts
14042
14056
34,35
17
13,4
14015
18,5
29,5
29,5
14008
• CE14. Shafts provided in accordance with UL 94 V-0 are
available in different colors.
Potentiometers can be supplied with shafts already inserted in.
ACP can also study special shafts.
29,75
• CA14. Shafts are available in different colors. They can also be
provided in accordance with UL 94 V-0.
Potentiometers can be supplied with shafts already inserted in.
ACP can also study special shafts.
14065
14066
14067
31,5
18
25,2
29,75
24,5
38,25
45
For the M rotor
14072
14073
32 | www.acptechnologies.com |
14081
14084
14117
14187
14250
Complete drawings can be found on pages 81-83
Thumbwheels
• CA14. This thumbwheel is available in different colors. It can also
be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with thumbwheels already inserted
in. ACP can also study special requests for thumbwheels.
• CE14. This thumbwheel in accordance with UL 94 V-0 is available in different colors.
Potentiometers can be supplied with thumbwheels already inserted
in. ACP can also study special requests for thumbwheels.
14003
Terminals
1,8
By default, terminals are always straight for the 14mm size, as shown on the “models” menu.
ACP can provide crimped terminals (with “snap in”), to better hold the component to the board prior to soldering.
1,5
R1,5
1
0.9
SNP
SNR
Adjustment possibilities
ACP’s potentiometers can be adjusted through either the front side (WT) or the collector side (WTI):
WTI
WT
WTI
WT
Collector side
Front side
Collector side
Front side
Potentiometers with cut track
The resistive element in this potentiometer has an area with very high resistive values, resulting in an open circuit. Recommended for
lighting regulation.
With cut at the beginning of the track CCW: Off-On.
With cut at the end of track- CW: On-Off. Others position available on request.
A
A
B
B
C
C
CCW: Off-On
CW: On-Off
Packaging
Bulk packaging: Potentiometers are first bagged and then introduced in boxes:
Potentiometer model
H2,5 - H4 - H5 - HA5 - HL5 -HC0 - H0
V12,5 - VA12,5 - VL12,5 - V15 - V17,5* - VD11*
VD7,5 - VR12,5
+ Shaft or thumbwheel inserted
Pieces per box (130 x 60 x 90)
- (only potentiometers)
200 (models with * : 150)
14003, 14117, 14042
100
14008, 14015, 14250, 14187, 14056, 14065
14066, 14067, 14072, 14073, 14081, 14084
75
Tape and reel (T&R) packaging will be available for SMD configurations, on request.
Complete drawings can be found on pages 81-83
| www.acptechnologies.com | 33
CA14
CE14
Potentiometers with detents
ACP’s “detent” (DT) feature is specially suitable for control applications. Our patented design has improved the performance of these
potentiometers:
- Longer mechanical life: 10.000 cycles.
- More stable electrical parameters.
- Improved reliability and Contact Resistance Variation (CRV).
- Narrower tolerances for detent positioning.
Detents can be lighter or stronger, or even a combination of both feelings. They can also be evenly distributed along the angle (standard)
or tailored to match customers’ request. They can also be combined with special tapers: constant value areas, different slopes, etc.
Examples:
A
A
A
11
52°
30°
40°
DETAIL
12,38°
DETAIL
6
1
22
0°
2DT
6DT
26
22DT
A
A
14
1
DETAIL
27DT
34 | www.acptechnologies.com |
0°
38 1
0°
26
26
27
7°
10°
19
DETAIL
38DT
1
0°
DETAIL
26
CA14. Electric Specifications
CE14. Electric Specifications
These are standard features; other specifications can be studied on request.
These are standard features; other specifications can always be studied on request.
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Range of resistance values
Lin (A)
Log (B) and Antilog(C)
Tolerance
Special tolerances available on request
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Lin (A), Log (B), Antilog (C)
Other tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
Tolerance
Special tolerances available on request
100Ω ≤ Rn ≤ 5MΩ
1KΩ … 2,2MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Lin (A)
Log (B), Antilog (C) and other
tapers available on request
Variation laws
Lin (A) ≤ 2Ω
Residual resistance
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
Maximum power dissipation at 40º C.
Lin (A)
No Lin (B, C)
0,25W
0,13W
Maximum power dissipation at 70º C.
Lin (A)
Non Lin (B, C)
0,7W
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
250VDC
See note 1
Maximum voltage at 40ºC
Lin (A)
No Lin (B, C)
250VDC
200VDC
Operating temperature
-25°C … +70°C
Operating temperature
-40°C … +125°C
Temperature coefficient
100Ω - 10KΩ Æ +200/ -300 ppm.
>10KΩ - 5MΩ Æ +200/ -500 ppm
Temperature coefficient
±100ppm.
Note 1: Value depends on taper, please, inquire.
CA14. Mechanical Specifications
Resistive element
CE14. Mechanical Specifications
Carbon technology
Angle of rotation (mechanical)
265º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
245º ± 20º
Max. stop torque
10 Ncm
Max. push/pull on rotor
50 N
< 2,5 Ncm
(0,5 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
1000 cycles (more available on request)
(10.000 cycles for pots. with detents)
CA14. Test
Resistive element
Cermet
Angle of rotation (mechanical)
265º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
245º ± 20º
Max. stop torque
10 Ncm
Max. push/pull on rotor
50 N
< 2,5 Ncm
(0,5 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
1000 cycles (more available on request)
(10.000 cycles for pots. with detents)
CE14. Test
Test // Conditions // Typical variation of Nominal Resistance
Test // Conditions // Typical variation of Nominal Resistance
Damp heat // 500 h. at 40°C and 95% RH // +5%; -2%
Damp heat // 500 h. at 40°C and 95% RH // ±2%
Thermal cycles // 16h at 85ºC, plus 2h at –25ºC // ±2,5%
Thermal cycles // 16h at 90ºC, plus 2h at –40ºC // ±2%
Load life // 1.000 h. at 40°C // +0%; -5%
Load life // 1.000 h. at 70°C // ±2%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±3%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±2%
Soldering effect // 2 seconds at 350°C // ±1%
Soldering effect // 2 seconds at 350°C // ±1%
Storage (3 years) // at 23°C ± 2°C // ±3%
Storage (3 years) // at 23°C ± 2°C // ±1%
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
All specifications are given at 23°C ± 2°C and 50% ± 25% RH.
| www.acptechnologies.com | 35
CA14
CE14 HOW TO ORDER
• EXAMPLE: CA14NH2,5-10KA2020 10DT SNP PI WT14117-BA
• EXAMPLE: CE14NH2,5-10KA2020 10DT SNP PI WT14117-BAV0
Extra features
Standard features
Series
Rotor
Model Packg Ohm value Taper
1
2
3
CA14/CE14
N
H2,5
4
Tol
Life
8
5
6
7
-10K
A
2020
Assembled accessory
Track Detents Snap in Housing Rotor
9
10
11
10DT
SNP
12
Wiper
Lin
14
15
13
Assembly Ref #
Color
Flam.
-BA
-V0
16
PI
WT
17
14117
Standard configuration
Customized products
Dimensions:
Protection:
A drawing is requested to order a customized product. The code assigned will
include all special specifications.
Substrate:
Color:
Packaging:
Wiper position:
Terminals:
Marking:
14mm
• CA14: IP 5 (dust-proof)
• CE14: IP 5 (dust-proof). Self-extinguishable, to meet UL 94 V-0
• CA14: Carbon technology
• CE14: Cermet
• CA14: Blue housing with white rotor
• CE14: Brown housing with white rotor
Bulk
at 50% ±15º
Straight, without SNAP IN.
Resistive value marked on housing. Others on request
2 - Rotors
1 - Series
• CA14
Series, rotor, model and total resistive value are given before the special code:
CA14PH2,5 10K CODE C00111.
P (standard)
• CE14
3 - Model and pitch
M
N
Z
D
E
T
F
4 - Packaging
H0
HC0
H2,5
H4
H5
HA5
HL5
V12,5
VA12,5
VL12,5
VR12,5
VD11
VD7,5
V15
V17,5
V15…CFF
HSMD and VSMD models can be available on request.
Bulk
T&R (Tape and reel)
Through-hole
SMD models
(blank)...(1)
On request
(N.A.)
(2)
On request
(1) If blank, bulk packaging is implied.
(2) N.A. - Not Available: Tape and Reel packaging is only available for SMD terminals.
5 - Resistance value
6 - Resistance law / taper
Taper:
Value Rn
Lin (A)
Log (B), Antilog (C)
100 Ω / 100
…/…
5 MΩ / 5M
1KΩ / 1K
…/…
2,2 MΩ / 2M2
Other resistive values available on request.
Lin - Linear
A
Log - Logarithmic
B (on request for CE)
Antilog - Antilogarithmic
C (on request for CE)
- Special tapers have codes assigned:
CODE YXXXXX
Please, indicate terminal position when ordering a special taper.
8 - Operating life (cycles)
7 - Tolerance
100 Ω ≤ Rn ≤ 1MΩ: ±20%
2020
Standard (1000cycles)
1 MΩ ≤ Rn ≤ 5MΩ: ±30%
3030
Long life: LV + the number of cycles. ex: LV10 for 10000 cycles(1)
For out of range values: Rn > 5MΩ, tol : +50% - 30%
5030
(1) Others on request.
-(leave blank)
LVXX: ex: LV10
Special tolerances available: <5% ... 10%, etc.
9 - Cut track
10 - Detents (DT)
At beginning of track, CCW: Off - On
PCI
One detent at the beginning
DTI
At end of track, CW: On - Off
PCF
One detent at the end
DTF
X number of detents
XDT: 10DT
Detents readily available: 1, 2, 3, 4, 5, 6, 8, 9, 17, 22, 27, up to 38 -evenly distributed along 260º±3º.
Others on request.
11 - Crimped terminals (SNAP IN)
12 - Housing color
SNAP IN P
SNP
• CA14: standard is blue
SNAP IN R
SNR
• CE14: standard is brown
With other colors -See color chart below-, for example, red
36 | www.acptechnologies.com |
CJ-color, ex.: CJ-RO
14 - Wiper
13 - Rotor color
Standard: white. With other colors: see color chart below
RT-color; ex., red: RT-RO
Wiper position (Standard: 50% ± 15º)
(leave blank)
Initial or CCW
PI
Final or CW
PF
Others: following clock positions; at 3hours: P3H
PXH, ex: P3H
Wiper torque (Standard: <2,5Ncm)
(leave blank)
Low torque (< 1.5Ncm)
PGB
16 - Potentiometers with assembled accessories
15 - Linearity
Independent linearity controlled & below x%, for example, 3%: LN3%
LNx%; ex: LN3%
Assembled from terminal side
WT
LAx%
Assembled from collector side
WTI
Absolute linearity controlled & below x%
Accessory Reference
See list of shafts and thumbwheels available
Color of shaft or thumbwheel
XXXXX
Example: 14117
-YY
Example, white: BA
17 - Flammability (according to UL 94 V-0)
• CA14: Not self-extinguishable
(leave blank)
Self-extinguishable according to standard UL 94
(including all plastic parts of the potentiometer: rotor, housing and
accessory. If only one part needs to be V0, please, inform)
-V0
• CE14: All accessories assembled with cermet potentiometers will
have the self-extinguishable property according to standard UL 94
-V0
For ordering spare accessories
Accessory reference - color- flammability. Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel
XXXX-YY-_ _
Color chart for rotor, housing and accessories
Black (1)
NE
White
BA
Neutral
IN
Transparent
TA
Red
RO
Green
VE
Yellow
AM
Blue
AZ
Grey
GS
Brown
MR
(1) Black is not an option for housings.
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 37
MCA9
Control
Carbon
Potentiometers
CA
MCE9
Control
Cermet
Potentiometers
CE
38 | www.acptechnologies.com |
MCA9
9mm carbon control potentiometers with low cost plastic enclosure and shaft and protection type IP 5 (dust-proof).
Standard tapers available include linear, log and antilog. ACP can
also study special requests.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing and rotor color.
Mechanical life.
Pause effect (up to 20 detents available).
Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Electronic appliances: white and brown goods, small household
appliances.
- Measurement and test equipment. Timers and relays.
- Lighting regulation.
MCE9
9mm cermet control potentiometers with low cost plastic enclosure
and shaft and protection type IP 5 (dust-proof). Self-extinguishable
plastic parts according to UL 94 V-0.
Standard taper is linear. Log, Antilog and other tapers are available
on request. Laser trimming equipment in-house, allowing for very
low tolerances.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing and rotor color.
Mechanical life.
Pause effect (up to 20 detents available).
Applications
- Electronic appliances: white and brown goods, small household
appliances.
- Measurement and test equipment. Timers and relays.
| www.acptechnologies.com | 39
MCA9
MCE9
Models
The color of the housing or rotor can be modified. SMD configuration can be available on request.
MCA9 H3,8
MCE9 H3,8
MCA9 H2,5
MCE9 H2,5
MCA9 H5
MCE9 H5
MCA9 V7,5
MCE9 V7,5
MCA9 V10
MCE9 V10
MCA9 VR10
MCE9 VR10
Shafts
Shafts are black by default. Other colors are available. ACP can also study special shafts. D dimension specified on drawings (end of
catalogue).
9006
Shafts
D (±0,5 mm)
9006
23,3
9019
17,2
9019
Terminals
1,62
1,6
By default, terminals are always straight for the 9mm size, as shown on the “models” menu.
ACP can provide crimped terminals (with “snap in”), to better hold the component to the board prior to soldering.
0,9
SNP
1,1
SNJ
Potentiometers with detents
ACP’s “detent” feature (DT) is specially suitable for control applications. Our patented design has improved the features of these potentiometers:
- Longer mechanical life: >10.000cycles.
- More stable electrical parameters.
- Improved reliability and Contact Resistance Variation (CRV).
- Narrower tolerances for detent positioning.
Detents can be lighter or stronger, or even a combination of both feelings. Detents can be evenly distributed along the angle (standard), or
tailored to match customers’ request. They can also be combined with special tapers: constant value areas, different slopes, etc.
Examples: 4, 6 and 20 detents –evenly distributed–.
E
E
E
10
4DT
40 | www.acptechnologies.com |
48º
1
DETAIL
20
0º
0°
1
6DT
1
0°
24
24
4
-12,6°
80°
6
DETAIL
DETAIL
24
20DT
Complete drawings can be found on page 84
Adjustment possibilities
Should the shaft need to be positioned differently than shown on the “models” section, please, enclose a drawing.
Potentiometers with cut track
The resistive element in this potentiometer has an area with very high resistive values, resulting in an open circuit. Recommended for
lighting regulation.
With cut at the beginning of the track CCW: Off-On.
With cut at the end of track- CW: On-Off. Others position available on request.
A
A
CCW: Off-On
B
B
C
C
CW: On-Off
| www.acptechnologies.com | 41
MCA9. Electric Specifications
MCE9. Electric Specifications
These are standard features; other specifications can always be studied on request.
These are standard features; other specifications can always be studied on request.
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Tolerance
Special tolerances available on request
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Lin (A), Log (B), Antilog (C)
Other tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
Tolerance
Special tolerances available on request
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Lin (A)
Log (B), Antilog (C) and other
tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
Maximum power dissipation at 40º C.
Lin (A)
Non Lin (B, C)
0,15W
0,10W
Maximum power dissipation at 40º C.
Lin (A)
Non Lin (B, C)
0,5W
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
200VDC
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
200VDC
150VDC
Operating temperature
-25°C … +70°C
Operating temperature
-40°C … +125°C
Temperature coefficient
100Ω - 10KΩ Æ +200/ -300 ppm.
>10KΩ - 5MΩ Æ +200/ -500 ppm
Temperature coefficient
±100ppm.
Note 1: Value depends on taper, please, inquire.
MCA9. Mechanical Specifications
Resistive element
MCE9. Mechanical Specifications
Carbon technology
Angle of rotation (mechanical)
240º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
220º ± 20º
< 2 Ncm
(0,4 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
10.000 cycles (more available on request)
Max. stop torque
25Ncm
Resistive element
Cermet
Angle of rotation (mechanical)
240º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
220º ± 20º
< 2 Ncm
(0,4 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
10.000 cycles (more available on request)
Max. stop torque
25Ncm
Max. push/pull on shaft
40N / 50N
Max. push/pull on shaft
40N / 50N
Max. torque on the nut
50Ncm
Max. torque on the nut
50Ncm
MCA9. Test
MCE9. Test
Test // Conditions // Typical variation of Nominal Resistance
Test // Conditions // Typical variation of Nominal Resistance
Damp heat // 500 h. at 40°C and 95% RH // +5%; -2%
Damp heat // 500 h. at 40°C and 95% RH // ±2%
Thermal cycles // 16h at 85ºC, plus 2h at –25ºC // ±2,5%
Thermal cycles // 16h at 85ºC, plus 2h at –25ºC // ±2%
Load life // 1.000 h. at 40°C // +0%; -5%
Load life // 1.000 h. at 40°C // ±2%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±3%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±2%
Soldering effect // 2 seconds at 350°C // ±1%
Soldering effect // 2 seconds at 350°C // ±1%
Storage (3 years) // at 23°C ± 2°C // ±3%
Storage (3 years) // at 23°C ± 2°C // ±3%
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
42 | www.acptechnologies.com |
All specifications are given at 23°C ± 2°C and 50% ± 25% RH.
| www.acptechnologies.com | 43
MCA9
MCE9 HOW TO ORDER
• EXAMPLE: MCA9DH5-10KA2020 SNP PI WT9006-BA
• EXAMPLE: MCE9DH5-10KA2020 SNP PI WT9006-V0BA
Standard features
Series
Extra features
Rotor Model Packg Ohm value Taper
1
2
3
MCA9/MCE9
D
H5
4
Tol
Life
8
5
6
7
-10K
A
2020
Assembled accessory
Track Detents Snap in Housing Rotor
9
10
11
12
Wiper
Lin
14
15
13
SNP
Assembly Ref #
Color
16
PI
WT
Flam.
17
9006
-BA
Standard configuration
Customized products
Dimensions:
Protection:
A drawing is requested to order a customized product. The code assigned will
include all special specifications.
Substrate:
Color:
Packaging:
Wiper position:
Terminals:
Marking:
9mm
• MCA9: IP 5 (dust-proof)
• MCE9: IP 5 (dust-proof) Self-extinguishable, to meet UL 94 V-0
• MCA9: Carbon technology
• MCE9: Cermet
• MCA9: Blue housing with white rotor
• MCE9: Brown housing with white rotor
Blister
at 50% ±15º
Straight, without SNAP IN.
Resistive value marked on housing. Others on request.
2 - Rotors
1 - Series
• MCA9
Series, rotor, model and total resistive value are given before the special code:
MCA9DH2,5 10K CODE C00111.
D
• MCE9
3 - Model and pitch
H2,5
4 - Packaging
H3,8
H5
V7,5
V10
VR10
84 units per blister
Blister
420 units per box of 430 x 270 x 120
5 - Resistance value
6 - Resistance law / taper
Taper:
Value Rn
Lin (A)
Log (B), Antilog (C)
100 Ω / 100
…/…
5 MΩ / 5M
1KΩ / 1K
…/…
2,2 MΩ / 2M2
Other resistive values available on request.
Lin - Linear
A
Log - Logarithmic
B (on request for CE)
Antilog - Antilogarithmic
C (on request for CE)
- Special tapers have codes assigned:
CODE YXXXXX
Please, indicate terminal position when ordering a special taper.
7 - Tolerance
8 - Operating life (cycles)
100 Ω ≤ Rn ≤ 1MΩ: ±20%
2020
Standard (10.000cycles)
1 MΩ ≤ Rn ≤ 5MΩ: ±30%
3030
Long life: LV + the number of cycles. ex: LV45 for 45000 cycles(1)
For out of range values: Rn > 5MΩ, tol : +50% - 30%
5030
(1) Others on request.
(leave blank)
LVXX: ex: LV45
Special tolerances available: <5% ... 10%, etc.
9 - Cut track
10 - Detents (DT)
At beginning of track, CCW: Off - On
PCI
One detent at the beginning CCW
DTI
At end of track, CW: On - Off
PCF
One detent at the end CW
DTF
X number of detents. Ex., 10
XDT: 10DT
Detents readily available: 3, 4, 6, 7, 9, 10, up to 20 –evenly distributed along 240º±5º. Others on request.
11 - Crimped terminals (SNAP IN)
12 - Housing color
SNAP IN P
SNP
• MCA9: standard is blue
SNAP IN J
SNJ
• MCE9: standard is brown
With other colors -see color chart below-, for example, red
44 | www.acptechnologies.com |
CJ-color, ex: CJ-RO
13 - Rotor color
14 - Wiper position
Standard is white
Standard is at 50% ± 15º
With other colors -see color chart below-, for example, red
RT-color; ex: RT-RO
(leave blank)
Initial or CCW
PI
Final or CW
PF
Others: following clock positions; at 3hours: P3H
PXH, ex: P3H
16 - Assembled accessories
15 - Linearity
Independent linearity controlled & below x%, for example, 3%: LN3%
LNx%; ex: LN3%
Absolute linearity controlled & below x%
LAx%
Assembled
WT
9XXX
Example: 9006
Reference (9006 or 9019)
-YY
Example, white: BA
Color of shaft (standard is black)
17 - Flammability (according to UL 94 V-0)
• MCA9: Not self-extinguishable
Color chart for rotor, housing and accessories
(leave blank)
Self-extinguishable according to standard UL 94
(including all plastic parts of the potentiometer: rotor, housing and
accessory. If only one part needs to be V0, please, inform)
-V0
• MCE9: All accessories assembled with cermet potentiometers will
have the self-extinguishable property according to standard UL 94
-V0
Black (1)
NE
White
BA
Neutral
IN
Transparent
TA
Red
RO
Green
VE
Yellow
AM
Blue
AZ
Grey
GS
Brown
MR
(1) Black is not an option for housings.
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 45
MCA14
Control
Carbon
Potentiometers
CA
46 | www.acptechnologies.com |
MCE14
Control
Cermet
Potentiometers
CE
MCA14
14mm control carbon potentiometers with low cost plastic enclosure and shaft and protection type IP 5 (dust-proof).
Standard tapers available include linear, log and antilog. ACP can
also study special requests.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing, rotor or accessory color.
Mechanical life.
Pause effect (up to 38 detents available).
Self-extinguishable plastic parts according to UL 94 V-0.
Applications
- Electronic appliances: white and brown goods, small household
appliances.
- Measurement and test equipment.
- Lighting regulation.
MCE14
14mm control cermet potentiometers with low cost plastic enclosure and shaft and protection type IP 5 (dust-proof). Self-extinguishable plastic parts according to UL 94 V-0.
Standard taper is linear. Log, Antilog and other tapers are available
on request. Laser trimming equipment in-house, allowing for very
low tolerances.
Terminals are manufactured in tinned brass to guarantee better
soldering and higher resistance to corrosion. They can be provided
straight or crimped (with “snap in”), recommended to hold the
potentiometer to the board prior to the soldering operation. SMD
configuration can be available on request.
Our potentiometers can be manufactured in a wide range of possibilities regarding:
-
Resistance value.
Tolerance.
Tapers / variation laws.
Pitch.
Positioning of the wiper (the standard is at 50%).
Housing, rotor or accessory color.
Mechanical life.
Pause effect (up to 38 detents available).
Applications
- Electronic appliances: white and brown goods, small household
appliances.
- Measurement and test equipment.
- Lighting regulation.
| www.acptechnologies.com | 47
MCA14
MCE14
Models
The color of the housing or rotor can be modified. SMD configuration can be available on request.
MCA14 H0
MCE14 H0
MCA14 HC0
MCE14 HC0
MCA14 H2,5
MCE14 H2,5
MCA14 H4
MCE14 H4
MCA14 H5
MCE14 H5
MCA14 HA5
MCE14 HA5
MCA14 HL5
MCE14 HL5
MCA14 V12,5
MCE14 V12,5
MCA14 VA12,5
MCE14 VA12,5
MCA14 VL12,5
MCE14 VL12,5
MCA14 V15
MCE14 V15
MCA14 V17,5
MCE14 V17,5
MCA14 VD7,5
MCE14 VD7,5
MCA14 VD11
MCE14 VD11
Shafts
Shafts are black by default. Other colors are available. ACP can also study special shafts. D dimension specified on drawings (end of
catalogue).
14008
Shafts
D (±0,5mm)
Shafts
D (±0,5mm)
14008
20,6
14073
35,5
14015
20
14081
15,2
14066
20,6
14084
20,2
14067
24,8
14187
15,6
14072
28,8
14250
22
14015
14066
14067
14072
14073
14081
14084
14187
14250
Terminals
R1,5
1
0.9
SNP
48 | www.acptechnologies.com |
1,5
1,8
By default, terminals are always straight for the 14mm size, as shown on the “models” menu.
ACP can provide crimped terminals (with “snap in”), to better hold the component to the board prior to soldering.
SNR
Complete drawings can be found on pages 85-87
Adjustment and orientation
Should the shaft need to be positioned differently than shown on this catalogue, please, enclose a drawing.
Potentiometers with detents
ACP’s “detent” feature (DT) is specially suitable for control applications. Our patented design has improved the features of these potentiometers:
- Longer mechanical life: >10.000cycles.
- More stable electrical parameters.
- Improved reliability and Contact Resistance Variation (CRV).
- Narrower tolerances for detent positioning.
Detents can be lighter or stronger, or even a combination of both feelings. Detents can be evenly distributed along the angle (standard), or
tailored to match customers’ request. They can also be combined with special tapers: constant value areas, different slopes, etc.
Examples:
A
A
A
11
52°
30°
40°
DETAIL
12,38°
DETAIL
6
1
22
0°
2DT
6DT
1
0°
DETAIL
26
26
22DT
A
A
14
7°
10°
19
1
DETAIL
0°
38 1
0°
26
26
27
DETAIL
27DT
38DT
Potentiometers with cut track
The resistive element in this potentiometer has an area with very high resistive values, resulting in an open circuit. Recommended for
lighting regulation.
With cut at the beginning of the track CCW: Off-On.
With cut at the end of track- CW: On-Off. Other positions available on request.
A
A
CCW: Off-On
B
B
C
C
CW: On-Off
| www.acptechnologies.com | 49
MCA14. Electric Specifications
MCE14. Electric Specifications
These are standard features; other specifications can always be studied on request.
These are standard features; other specifications can always be studied on request.
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Range of resistance values
Lin (A)
Log (B) Antilog (C)
Tolerance
Special tolerances available on request
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Lin (A)
Log (B), Antilog (C) and other
tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
Tolerance
Special tolerances available on request
100Ω ≤ Rn ≤ 5MΩ
1 KΩ … 2,2 MΩ
100Ω … 1MΩ ±20%
>1MΩ … 5MΩ ±30%
Out of range: Rn> 5MΩ: +50%, -30%
Lin (A)
Log (B), Antilog (C) and other
tapers available on request
Variation laws
Lin (A), Log (B), Antilog (C) ≤ 5*10-3*Rn
Minimum value 2Ω
Residual resistance
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (dynamic)
≤3%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
CRV - Contact Resistance Variation (static)
≤5%Rn
Maximum power dissipation at 40º C.
Lin (A)
Non Lin (B, C)
0,25W
0,13W
Maximum power dissipation at 70º C.
Lin (A)
Non Lin (B, C)
0,7W
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
250VDC
See note 1
Maximum voltage at 40ºC
Lin (A)
Non Lin (B, C)
250VDC
200VDC
Operating temperature
-25°C … +70°C
Operating temperature
-40°C … +125°C
Temperature coefficient
100Ω - 10KΩ Æ +200/ -300 ppm.
>10KΩ - 5MΩ Æ +200/ -500 ppm
Temperature coefficient
±100ppm.
Note 1: Value depends on taper, please, inquire.
MCA14. Mechanical Specifications
Resistive element
MCE14. Mechanical Specifications
Carbon technology
Angle of rotation (mechanical)
265º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
245º ± 20º
< 2 Ncm
(0,4 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
10.000 cycles (more available on request)
Max. stop torque
15Ncm
Resistive element
Cermet
Angle of rotation (mechanical)
265º ± 5º
Wiper position
Middle position: 50% ± 15º
Angle of rotation (electrical)
245º ± 20º
< 2 Ncm
(0,4 ... 3,5Ncm for pots. with detents)
Wiper torque
Mechanical life
10.000 cycles (more available on request)
Max. stop torque
15Ncm
Max. push/pull on shaft
50 N / 25 N
Max. push/pull on shaft
50 N / 25 N
Max. torque on the nut
80 Ncm
Max. torque on the nut
80 Ncm
MCA14. Test
MCE14. Test
Test // Conditions // Typical variation of Nominal Resistance
Test // Conditions // Typical variation of Nominal Resistance
Damp heat // 500 h. at 40°C and 95% RH // +5%; -2%
Damp heat // 500 h. at 40°C and 95% RH // +5%; -2%
Thermal cycles // 16h at 85ºC, plus 2h at –25ºC // ±2,5%
Thermal cycles // 16h at 90ºC, plus 2h at –40ºC // ±2%
Load life // 1.000 h. at 40°C // +0%; -5%
Load life // 1.000 h. at 70°C // ±2%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±3%
Mechanical life // 1000 cycles at 10 c.p.m. and at 23°C ± 2°C // ±2%
Soldering effect // 2 seconds at 350°C // ±1%
Soldering effect // 2 seconds at 350°C // ±1%
Storage (3 years) // at 23°C ± 2°C // ±3%
Storage (3 years) // at 23°C ± 2°C // ±1%
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
For further information on tests, go to TESTS AND RELIABILITY on pages 10-11.
50 | www.acptechnologies.com |
All specifications are given at 23°C ± 2°C and 50% ± 25% RH.
| www.acptechnologies.com | 51
MCA14
MCE14 HOW TO ORDER
• EXAMPLE: MCA14NH2,5-10K2020 SNP PI WT14187-BA
• EXAMPLE: MCE14NH2,5-10K2020 SNP PI WT14187-BA-V0
Extra features
Standard features
Series
Rotor Model Packg Ohm value Taper
1
2
3
MCA14/MCE14
N
H2,5
4
Tol
Life
8
5
6
7
10K
A
2020
Assembled accessory
Track Detents Snap in Housing Rotor
9
10
11
12
Wiper
Lin
14
15
13
SNP
Assembly Ref #
Color
16
PI
WT
Flam.
17
14187
-BA
Standard configuration
Customized products
Dimensions:
Protection:
A drawing is requested to order a customized product. The code assigned will
include all special specifications.
Substrate:
Color:
Packaging:
Wiper position:
Mech. life:
Terminals:
Marking:
14mm
• MCA14: IP 5 (dust-proof)
• MCE14: IP 5 (dust-proof) Self-extinguishable, to meet UL 94 V-0
• MCA14: Carbon technology
• MCE14: Cermet
• MCA14: Blue housing with white rotor, black shaft
• MCE14: Brown housing with white rotor, black shaft
Blister
at 50% ±15º
10.000cycles
Straight, without SNAP IN.
Resistive value marked on housing. Others on request.
1 - Series
• MCA14
Series, rotor, model and total resistive value are given before the special code:
MCA14PH2,5 10K CODE C00111.
2 - Rotors
• MCE14
N
3 - Model and pitch
H0
HC0
4 - Packaging
H2,5
H4
H5
HA5
HL5
84 units per blister
Blister
V12,5
VA12,5
VL12,5
V15
V17,5
VD7,5
VD11
5 - Resistance value
6 - Resistance law / taper
Taper:
Value Rn
420 units per box of 430 x 270 x 120
Lin (A)
Log (B), Antilog (C)
100 Ω / 100
…/…
5 MΩ / 5M
1KΩ / 1K
…/…
2,2 MΩ / 2M2
Other resistive values available on request.
Lin - Linear
A
Log - Logarithmic
B (on request for CE)
Antilog - Antilogarithmic
C (on request for CE)
- Special tapers have codes assigned:
CODE YXXXXX
Please, indicate terminal position when ordering a special taper.
7 - Tolerance
8 - Operating life (cycles)
100 Ω ≤ Rn ≤ 1MΩ: ±20%
2020
Standard (10.000cycles)
(leave blank)
1 MΩ ≤ Rn ≤ 5MΩ: ±30%
3030
Long life: LV + the number of cycles. ex: LV45 for 45000 cycles
For out of range values: Rn > 5MΩ, tol : +50% - 30%
5030
(1) Others on request.
(1)
LVXX: ex: LV45
Special tolerances available: <5% ... 10%, etc.
9 - Cut track
10 - Detents (DT)
At beginning of track, CCW: Off - On
PCI
One detent at the beginning
DTI
At end of track, CW: On - Off
PCF
One detent at the end
DTF
X number of detents
XDT: 10DT
Detents readily available: 1, 2, 3, 4, 5, 6, 8, 9, 17, 22, 27, up to 38 –evenly distributed along 260º±3º–.
Others on request.
11 - Crimped terminals (SNAP IN)
12 - Housing color
SNAP IN P
SNP
• MCA14: standard is blue
SNAP IN R
SNR
• MCE14: standard is brown
With other colors -see color chart below-, for example, red
52 | www.acptechnologies.com |
CJ-color, ex: CJ-RO
13 - Rotor color
14 - Wiper position
Standard is white
Standard is at 50% ± 15º
With other colors -see color chart below-, for example, red
RT-color; ex: RT-RO
(leave blank)
Initial or CCW
PI
Final or CW
PF
Others: following clock positions; at 3hours: P3H
15 - Linearity
PXH, ex: P3H
16 - Assembled accessories
Independent linearity controlled & below x%, for example, 3%: LN3%
LNx%; ex: LN3%
Absolute linearity controlled & below x%
LAx%
Assembled
WT
14XXX
Example: 14187
Shaft reference
-YY
Example, white: BA
Color of shaft (standard is black)
17 - Flammability (according to UL 94 V-0)
• MCA14: Not self-extinguishable
Color chart for rotor, housing and accessories
(leave blank)
Self-extinguishable according to standard UL 94
(including all plastic parts of the potentiometer: rotor, housing and
accessory. If only one part needs to be V0, please, inform)
-V0
• MCE14: All accessories assembled with cermet potentiometers will
have the self-extinguishable property according to standard UL 94
-V0
Black (1)
NE
White
BA
Neutral
IN
Transparent
TA
Red
RO
Green
VE
Yellow
AM
Blue
AZ
Grey
GS
Brown
MR
(1) Black is not an option for housings.
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 53
DRAWINGS CA6
Tolerances 6 mm (in mm.):
<1
±0,1
1...<5
±0,3
5...
±0,5
Model types. CA6
CA6 H2,5
CA6 V2,5
6,5
3.6
2,5
1,6
5.1
3,6
6,5
Ø1
6,5
1,6
5
A
Ø1
2,5
0,9
2,5
2,5
2,5
View A
5.7
0,7
2,5
5
2,5
3,3
2,5
6,5
4,5
0,9
7,7
3,3
0,7
CA6 V5
CA6 VS5
4.2
1,6
3,6
Ø1
Ø 2,5
2,5
A
5
2,5
5
2,5
5
2,5
2,5
5
2,5
6,5
6,5
2,5
Ø 2,5
2,5
View A
4.7
View A
0,7
2,6
0,7
3,3
CA6 HSMD
CA6 VSMD
3.9
6,5
4,3
2
3,6
6,5
6
1,5
7
3,75
6,5
6,5
2
1,6
3,6
Ø 2,5
8,4
4,2
2
4
2,15
2,15
Thumbwheels CA6
6001
6030
6,3
5,8
2,7
6,3
5,8
0,8
1,55
1,4
4.3
6.2
2,7
1,5
Ø 3,2
0,8
Ø 3,2
6032
6,5
3,4
Ø 1,9
Ø 2,4
Ø 4,4
Ø 6.3
0,8
1
Ø 4,7
0,63
2
F
2,8
F
Specifications on this catalogue are for reference only; they are subject to change without notice.
76 | www.acptechnologies.com |
4,3
5
Ø1
2,5
A
6,5
6,5
0,9
3,6
2,5
4.6
DRAWINGS CA6
Tolerances 6 mm (in mm.):
<1
±0,1
1...<5
±0,3
5...
±0,5
Shafts. CA6
6022
6023
13
9
13
9
0,64
0,64
5
5
Ø1,84
Ø1,84
Ø4
Ø5
6025
6024
15,2
11,2
6,5
17,5
13,5
9
6,5
0,64
9
Ø6
0,64
Ø5
Ø 1,84
Ø1,84
6031
6028
9
14
1
Ø5
1
0,64
10
6
13,5
4,8
Ø1,84
6
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 77
DRAWINGS CA9 // CE9
Tolerances 9 mm (in mm.):
<1
±0,1
1...<5
±0,3
5...
±0,5
Model types. CA9 // CE9
CA9 H2,5 // CE9 H2,5
CA9 H3,8 // CE9 H3,8
5,2
5
5,2
9,8
9,8
5
Ø1,3
10
7
12
5
7
5
10
Ø 1,3
3,8
2,5
1
4
4
3,8
2,5 2,5
2,5
2,5
2,5
1
CA9 H5 // CE9 H5
CA9 HS3,8 // CE9 HS3,8
5,2
5,2
9,8
5
9,8
5
Ø1,3
5
12
5
10
10,3
10
Ø1,3
Ø
7
5,3
3,8
5
4
3,5
2,5 2,5
3,8
2,5 2,5
5
1
CA9 V10 // CE9 V10
CA9 V7,5 // CE9 V7,5
6
5
6
5
9,8
1,3
Ø
9,8
Ø1,3
4
Ø
7,5
6,2
2,5
5
10
5
A
2,5 2,5
5
1
View A
10
10
7,5
A
2,5
10
Ø3
6,2
5
1
View A
4
4
CA9 VR10 // CE9 VR10
CA9 MAV10 // CE9 MAV10
6
5
9,8
7,2
Ø 1,3
A
9,8
,3
Ø1
6
10
5
6,2
5
1
View A
2,5 2,5
4
6,2
View A
1
4
CA9 MTV10 // CE9 MTV10
6
A
9,8
,3
10
2
10
10
Ø1
2,5 2,5
2,5 2,5
6,2
View A
1
5
4
Specifications on this catalogue are for reference only; they are subject to change without notice.
78 | www.acptechnologies.com |
4
Ø
10
10
Ø 3,95
5
A
1
2,5 2,5
10
2
10
10
Ø4
5
DRAWINGS CA9 // CE9
Tolerances 9 mm (in mm.):
<1
±0,1
1...<5
±0,3
5...
±0,5
Thumbwheels. CA9 // CE9
9002
5,9
9041
3,9
2
1,5
5,8
2
Ø 11,5
0,8
Ø 21
A
View A
3
3
1,5
2
Ø21
Ø5
Ø15
Ø21
2
20°
5
Ø15
1,5
9061
20°
5
3
Ø5
9060 For Rrotor
10
10
Shafts. CA9 // CE9
9004
9005
13,9
13,9
5
Ø4
Ø5
5
10
2
10
9006
9009
23,4
13,5
13,5
9
6,5
Ø6
Ø9
Ø6
6,5
18,4
6,2
9010
9018 For 6 potentiometers
19,1
Ø9
48,3
9,3
3
10,5
6
36,3
1,5
Ø6
Ø5
11,2
6,5
9039 For 4 potentiometers
9047
33,3
9,3
10,5
6
21,3
1,5
33,4
7,1
2
21,2
4,9
Ø6
Ø6
5,3
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 79
DRAWINGS CA9 // CE9
Tolerances 9 mm (in mm.):
<1
±0,1
1...<5
±0,3
5...
±0,5
Shafts. CA9 // CE9
9051 For 4 potentiometers
9048 For 2 potentiometers
25
9,3
10,5
13
6
12,7
12
1,5
21,3
6
Ø 8,5
Ø6
1,5
35,5
9053
16,1
9
9054
13,4
8,5
6,5
9
Ø5
Ø6
11,2
6,5
9055
9056 For 8 potentiometers
14,9
10
5
57
9,3
10,5
45
6
6
1,5
Metallic
Hexagon
9059
9063
18,4
9
3,9
13,5
13,5
6,5
9
1
6,5
Ø6
1
1
18,4
9064
9067
15,3
5
9
10,8
5,3
4,5
5,3
1
Ø5
Ø6
5
6
1
Specifications on this catalogue are for reference only; they are subject to change without notice.
80 | www.acptechnologies.com |
DRAWINGS CA14 // CE14
Tolerances 14 mm (in mm.):
<1
±0,1
1...<10
±0,3
10...
±0,5
Model types. CA14 // CE14
CA14 H0 // CE14 H0
CA14 HC0 // CE14 HC0
14
6
6
14
,3
14
10
5
5
1
5
2
4
14
10
17
14
5
Ø1
1,2
5
CA14 H4 // CE14 H4
CA14 H2,5 // CE14 H2,5
6
6
14
14
,3
,3
10
9,6
4,4
8,8
16,6
14
Ø1
10
17
14
Ø1
4
4
4
2,5
1
5
2,5
5
4,4 4,4
1
CA14 H5 // CE14 H5
CA14 HA5 // CE14 HA5
6
14
6
14
,3
Ø1
10
14
19,5
12,5
10
5
10
17
14
Ø1,3
5
5
4
4
5
5
5
1
1
5
5
5
CA14 V12,5 // CE14 V12,5
CA14 HL5 // CE14 HL5
6
6
14
14
,3
Ø1
12,5
14
Ø7
7,5
5
A
7,5
10
13,8
20,8
14
5
Ø1,3
5
1
View A
5
5
10
7
5
4
5
5
1
4
CA14 VA12,5 // CE14 VA12,5
CA14 VL12,5 // CE14 VL12,5
6
6
14
14
,3
Ø1
,3
5
Ø1
10
8,5
7,5
14
10
5
5
10,5
1
5
1
5
7,5
7,5
14
12,5
7,5
A
12,5
5
Ø7
Ø7
View A
4
View A
3,5
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 81
DRAWINGS CA14 // CE14
Tolerances 14 mm (in mm.):
<1
±0,1
1...<10
±0,3
10...
±0,5
Model types. CA14 // CE14
CA14 VR12,5 // CE14 VR12,5
CA14 V15 // CE14 V15
14
6
.3
Ø1
5
6
,3
14
Ø1
A
7.5
7,5
10
7.5
7
1
5
Ø7
14
15
7,5
12.5
14
7,5
Ø7
5
5
10
7
1
10
View A
4
4
CA14 V17,5 // CE14 V17,5
CA14 V15...CFF // CE14 V15...CFF
,3
Ø1
6
14
,3
17,5
14
7,5
Ø7
Ø7
10
10
7,5
6
7,5
Ø1
A
10
5
5
7
10
1
7
View A
4
CA14 VD7,5 // CE14 VD7,5
CA14 VD11 // CE14 VD11
6
14
13,5
6
13,5
14
13,5
1,3
14
3,2
18
11
,3
5
5
10
4,4
4,4
10
7,5
4
1
Thumbwheels. CA14 // CE14
14003
7,5
6,4
Ø16
0,8
1,1
Ø4
Shafts. CA14 // CE14
14008
14015
29,5
1,1
6,5
23
3,8
8
29.5
23.25
6
6.25
4,6
Ø6
Ø5,9
8
8,6
14042
1,4
14056
13,4
4,4
6,5
2,5
18,5
7,5
4,75
6,25
=
4,4
=
Ø6
6,35
6
12,7
Specifications on this catalogue are for reference only; they are subject to change without notice.
82 | www.acptechnologies.com |
4
1
View A
Ø7
Ø1
7,5
5
7,5
3,2
14
Ø7
Ø 1,3
5
7,5
A
0
1,3
11
13,5
DRAWINGS CA14 // CE14
Tolerances 14 mm (in mm.):
<1
±0,1
1...<10
±0,3
10...
±0,5
Shafts. CA14 // CE14
14065
R3
75
14066
17
11,5
,1
5,5
29,75
13,5
6,25
10
4,
5
42,
5°
6
14067
14072
34,35
15,2
12,9
38,25
6,25
14,5
6
4,6
17,5
6,25
54∞
5
28∞
6
14073
14081
45
30,75
8
6,25
6,25
6
1,2
Ø6
24,5
10,25
4,6
8
3,7
14084
14117
6
1,2
Ø6
29,75
15,5
8
18,2
11,7
6,5
8
6,25
6
4,
3,7
45∞
14187
14250
25,2
18,7
Ø6
6,5
31,5
25
6,5
1,2
1,2
Ø6
3,7
8
3,7
8
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 83
DRAWINGS MCA9 // MCE9
Tolerances 9 mm (in mm.):
<1
±0,1
1...<5
±0,3
5...
±0,5
Model types. MCA9 // MCE9
MCA9 H2,5 // MCE9 H2,5
MC9 H3,8 // MCE9 H3,8
7,5
D
7,5
11
4
M7x0,75
D
M7x0,75
3
5
11
5
7
4
7
2,5
2,7
2,7
2,5
MCA9 H5 // MCE9 H5
3,8
2,5
7
MCA9 V7,5 // MCE9 V7,5
11
11
7,5
7,5
M7x0,75
D
4
Ø1,3
Ø1
,3
1
4
7
1
5
7
4
5
11
3
7,5
3
11
M7x0,75
2,7
5
5
7,5
7
4
MCA9 V10 // MCE9 V10
7,5
11
Ø1
,3
7,5
11
3
7
7
4
1
4
1
M7x0,75
10
M7x0,75
10
3
D
MCA9 VR10 // MCE9 VR10
11
11
8,5
5
5
10
Ø1,3
10
4
8,5
D
4
9019
0,9
25,9
3,9
18
1,95
24
3
0,9
Ø4
1,95
Shafts. MCA9 // MCE9
9006
8,5
Ø4
16
1,39
19,9
3,9
1,6
D ( + 0,5 mm) 17,2
D ( + 0,5 mm) 23,3
Washer and nut. MCA9 // MCE9
WASHER
12
0,5
NUT
M 7x0,75
2
7,2
Specifications on this catalogue are for reference only; they are subject to change without notice.
84 | www.acptechnologies.com |
D
Ø1,3
DRAWINGS MCA14 // MCE14
Tolerances 14 mm (in mm.):
<1
±0,1
1...<10
±0,3
10...
±0,5
Model types. MCA14 // MCE14
MCA14 H0 // MCE14 H0
MCA14 HC0 // MCE14 HC0
9,2
D
16
9,2
D
7
16
7
M10x0,75
M10 x0,75
5
16
Ø6
4
14
10
Ø6
16
5
Ø1,3
1
4
=
2,5
4
=
5
MCA14 H2,5 // MCE14 H2,5
MCA14 H4 // MCE14 H4
9,2
D
5
10
10
16
9,2
D
16
7
7
2,5
4,4 4,4
9,6
Ø1,3
Ø6
5
4
2,5
4
=
4
4
1
1
Ø1,3
4
10
Ø6
16
5
16
M10x0,75
M10x0,75
=
4
=
8,8
=
10
MCA14 H5 // MCE14 H5
MCA14 HA5 // MCE14 HA5
9,2
D
16
9,2
D
7
16
7
M10x0,75
M10x0,75
5
16
Ø6
5
5
12,5
5
4
1
5
=
1
=
5
4
10
4
4
Ø1,3
5
10
Ø6
16 `0,1
5
Ø1,3
=
=
10
MCA14 HL5 // MCE14 HL5
MCA14 V12,5 // MCE14 V12,5
Ø6
9,2
D
16
7
M10x0,75
5
=
5
10,4
1
MCA14 VA12,5 // MCE14 VA12,5
5
Ø1,3
5
MCA14 VL12,5 // MCE14 VL12,5
Ø6
Ø6
M10x0,75
5
7,5
12,5
10
5
1
5
9,2
5
Ø1,3
16
16
13,9
11,9
9,2
16
7,5
12,5
10
5
7
7
D
D
M10x0,75
1
5
7,5
=
10
16
16
9,2
5
16
4
1
4
12,5
10
5
7
Ø1,3
13,8
Ø6
16
D
M10 x0,75
Ø1,3
5
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 85
DRAWINGS MCA14 // MCE14
Tolerances 14 mm (in mm.):
Model types. MCA14 // MCE14
MCA14 V15 // MCE14 V15
MCA14 V17,5 // MCE14 V17,5
Ø6
Ø6
M10x0,75
7
7
D
D
M10x0,75
1
7,5
9,2
Ø1,3
16
10,4
5
10
16
7,5
10
Ø6
Ø6
M10x0,75
D
D
M10x0,75
7
16
1
1
11
7,5
Shafts. MCA14 // MCE14
14008
1,1
14015
29.5
23.25
6
6,5
6.25
8
Ø6
Ø5,9
4,6
8
3,8
9,2
1,3
3,2
16
10,9
10
9,2
10,9
16
13,5
7
Ø1,3
3,2
29,5
23
8,6
1,4
D ( + 0,5 mm) 20
D ( + 0,5 mm) 20,6
14066
14067
29,75
6
13,5
6,25
34,35
4,6
15,2
12,9
6,25
5
54∞
10
4,
6
D ( + 0,5 mm) 20,6
D ( + 0,5 mm) 24,8
14073
14072
38,25
6
14,5
17,5
6,25
Ø6
8
45
30,75
6,25
5
1,2
28∞
D ( + 0,5 mm) 28,8
3,7
D ( + 0,5 mm) 35,5
Specifications on this catalogue are for reference only; they are subject to change without notice.
86 | www.acptechnologies.com |
Ø1,3
MCA14 VD11 // MCE14 VD11
MCA14 VD7,5 // MCE14 VD7,5
16
17,5
5
15
5
7,5
1
9,2
16
10,4
16
Ø1,3
1,3
±0,5
13,5
10...
8,8
±0,3
10
±0,1
1...<10
5
<1
DRAWINGS MCA14 // MCE14
Tolerances 14 mm (in mm.):
<1
±0,1
1...<10
±0,3
10...
±0,5
Shafts. MCA14 // MCE14
14081
24,5
10,25
8
14084
6,25
6
29,75
15,5
8
6,25
4,6
6
4,
6
45∞
D ( + 0,5 mm) 15,2
D ( + 0,5 mm) 20,2
14250
14187
25,2
18,7
31,5
6,5
1,2
3,7
8
3,7
16
0,5
6,5
8
D ( + 0,5 mm) 15,6
Washer and nut. MCA-14 // MCE-14 // COM MCA-14
WASHER
25
Ø6
1,2
Ø6
D ( + 0,5 mm) 22
NUT
M10x0,75
2,5
10,5
Specifications on this catalogue are for reference only; they are subject to change without notice.
| www.acptechnologies.com | 87