Square D Clipsal
Outdoor Motion Sensor
®
®
The Square D ® Clipsal ® Outdoor PIR Motion Sensor combines
reliable thermal-radiation-based control of lighting with rugged
construction suitable for outdoor requirements. The unit’s advanced
circuits and flat multi-segmented lens provide coverage of up to 3000
square feet in a 110° field of view.
The detection area incorporates a multi-faceted lens, which ensures
fast response to motion and few dead zones. Electrostatic and
electromagnetic shields, dual element detectors, an optical bandpass
filter, and pyroelectric ceramic sensors are used to reduce the
incidence of false triggering.
Configuration options include an adjustable light-level sensor that can
be set to automatically turn off lights when ambient light levels are
sufficient or turn on lights when ambient light levels are insufficient.
Features


Clipsal Outdoor PIR Motion Sensor






Outdoor use, wall or ceiling-mounted unit with a 110˚ field of view
and a detection area up to 3000 square feet in diameter
Lens has 12 overlapping zones on each of 4 levels, forming a
continuous detection field
Rugged construction and pre-wired flexible cord
LED indicates motion detection
Light-level sensor has Sunrise/Sunset settings, clock overrides,
and adjustable sensitivity ranging from 0.1 footcandle to full
sunlight
Controls up to four C-Bus group addresses that can be
individually scheduled
Non-volatile memory stores operating status for recovery from a
power outage
Receives data and power over a network, so the sensor does not
require power packs or line voltage connections
Distributed Intelligence


Compatible with all Clipsal devices and the Powerlink ®
NF3000G3C controller
Easily configured by using Learn Mode or the C-Bus™ Toolkit
Software and a personal computer connected to the C-Bus
network
Specifications
Outdoor PIR Motion Sensor
Field of view from top and side of outdoor
motion sensor
Nominal Voltage
Requirements
15‑36 V DC @ 18 mA, drawn from the
C-Bus network
Field of View
110˚
PIR Detection Field
Typically 3000 sq ft (279 sq m)
Light Level Inhibit
Threshold
Continuous from 0.1 footcandle (1 lux) to full
sunlight
Number of
Detection Zones
•
•
•
•
Timer Delay
Range
0 sec to 18 hr
Number of Units
per Network
Use the C-Bus Calculator, a software utility,
to determine the total network current load
C-Bus
Connection
One terminal block
Status Indicator
LED can be configured to turn on when
motion is detected
Dimensions
4.5 in. (L) x 2.9 in. (W) x 5.5 in. (D)
18 Long Range
16 Intermediate Range
10 Short Range
4 Ultra Short Range
Side view of outdoor motion sensor
Weight
8 oz (227 g)
Mounting
• Standard plate/box with 3.3 in. (84 mm)
centers
• Surface: Ceiling or wall
• Ht: 8 ft (2.4 m) above floor
Operating
Environment
• Outdoor
• 32˚F to +122˚F (0˚C to +50˚C)
Standards
• UL: Listed 916 Energy Management
Equipment
• IP66 Rated
• CSA 22.2 Spec 205 Signal Equipment
• FCC: Part 15.101, Class B Digital Device
• EN61000-4-2 Immunity to ESD
Order Information
Description
Catalog Number
Clipsal 110° Outdoor PIR Motion
Sensor
SLC5750WPL
Schneider Electric North American Operating Division
Document Number 1250HO0514
295 Tech Park Drive
Square D, the
logo, Clipsal, Powerlink, and C-Bus are trademarks or registered
LaVergne, TN 37086
trademarks of Schneider Elecric and/or its affiliates in the United States and/or other countries.
Tel: 1-888-squared
www.squaredlightingcontrol.com
2/06
© 2006 Schneider Electric. All Rights Reserved.
[114 mm (L) x 74 mm (W) x 140 mm (D)]