INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
DIRECTIONS: Please save a copy of this form to your computer by selecting “FILE/SAVE AS” before entering text and numbers. Then fill in your information
electronically and select “SAVE.” Note that this form requires Adobe Reader® version 11.0 to function properly. Download the most recent version of Adobe
Reader® at http://get.adobe.com/reader.
General Specifications
1. A pre-approval application is required; review instructions on the standard and custom incentives pre-approval
and final application form. Wait for pre-approval before starting your project.
2. All lighting projects are expected to comply with the Illuminating Engineering Society of North America (IESNA)
recommended lighting levels or the local code.
3. A pending T12 baseline change may reduce future incentive levels on all T12 measures.
4. Refer to the Default Fixture Wattage Reference Table on pages 13 to 14 to determine baseline wattage.
5. Original manufacturer’s specifications sheets must be submitted with pre-approval and final applications to verify measure
eligibility. Measure eligibility information can be found under individual specifications in this worksheet.
6. Lamp and ballast photographs must be submitted with the pre-approval application when replacing existing high output
lamps.
7. Use baseline code ASHRAE 90.1 for new construction projects that involve a change in building and/or space type. These
projects are eligible for incentives under the all other lighting measure on page 12 in this worksheet.
LED Fixtures
SPECIFICATIONS
1. Product must be listed on the DesignLightsTM Consortium Qualified Products List available at http://www.designlights.org/.
2. Linear LED tubes are not eligible for incentives.
Please complete the watt reduction worksheet on the following page.
EQUIPMENT TYPE and DEFINITION
UNIT
INCENTIVE
LED Fixtures
Replacement of an existing interior lighting system
with a new or lighting system containing LED fixtures
(project does not have to be a one-for-one replacement).
Reduction in connected watts
$0.40 per watt reduced
(Note: This measure does not apply to channel signs,
open signs or refrigerated display case lighting.)
Company Name:
1
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Watt Reduction Worksheet for LED Fixtures
Use this worksheet or attach an itemized project plan. (See example in red.)
TYPE OF
EQUIPMENT
TO BE
REPLACED
example:
2-lamp 4-ft
T12
QUANTITY OF
EQUIPMENT
TO BE
REPLACED
WATTAGE OF
EQUIPMENT
TO BE
REPLACED
TOTAL
WATTAGE
OF OLD
EQUIPMENT
100
72
7,200
TYPE OF
QUANTITY
NEW FIXTURE TO
OF NEW
BE INSTALLED EQUIPMENT
WATTAGE
OF NEW
EQUIPMENT
TOTAL
WATTAGE
OF NEW
EQUIPMENT
DIFFERENCE
(OLD WATTAGE
MINUS NEW)
44
5,280
1,920
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
example:
LED 2x4 ft
troffer
120
SUBTOTAL OLD WATTAGE MINUS NEW
EQUIPMENT TYPE
LED Fixtures
(A)
INCENTIVE PER UNIT
(B)
UNIT
$0.40 per watt reduced
Watts reduced
(from worksheet above):
0
________________
SUBTOTAL $
2
0
(A x B)
INCENTIVE
$ 0.00
0.00
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
LED Retrofits
SPECIFICATIONS
1. Product must be listed on the DesignLightsTM Consortium Qualified Products List available at http://www.designlights.org/.
2. Applications for LED retrofits must include documentation from the LED product manufacturer that clearly defines
compatibility of the LED product with the fixture being retrofitted. Documentation from the manufacturer must include the
model of the LED retrofit kit, the project name and/or project location, the fixture model or type being retrofitted and that the
retrofit kit is compatible with the existing fixture.
3. L
inear LED tubes are not eligible for incentives.
Please complete the watt reduction worksheet on the following page.
EQUIPMENT TYPE and DEFINITION
LED Retrofits
Replacement of an existing interior lighting system
with a retrofit lighting system containing LEDs.
UNIT
INCENTIVE
Reduction in connected watts
$0.40 per watt reduced
(Note: This measure does not apply to channel signs,
open signs, LED screw-based replacement for
HID lamps or refrigerated display case lighting.)
3
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Watt Reduction Worksheet for LED Retrofits
Use this worksheet or attach an itemized project plan. (See example in red.)
TYPE OF
EQUIPMENT
TO BE
REPLACED
QUANTITY OF
EQUIPMENT
TO BE
REPLACED
WATTAGE OF
EQUIPMENT
TO BE
REPLACED
100
72
example:
2-lamp 4-ft
T12
TOTAL
TYPE OF
QUANTITY
WATTAGE
NEW RETROFIT
OF NEW
OF OLD
TO BE INSTALLED EQUIPMENT
EQUIPMENT
WATTAGE
OF NEW
EQUIPMENT
TOTAL
WATTAGE
OF NEW
EQUIPMENT
DIFFERENCE
(OLD WATTAGE
MINUS NEW)
44
5,280
1,920
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
7,200
example:
LED 2x4 ft
troffer
120
SUBTOTAL OLD WATTAGE MINUS NEW
EQUIPMENT TYPE
LED Retrofits
(A)
INCENTIVE PER UNIT
(B)
UNIT
$0.40 per watt reduced
Watts reduced
(from worksheet above):
0
________________
0
(A x B)
INCENTIVE
$ 0.00
SUBTOTAL $ 0.00
4
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
LED Lighting
EQUIPMENT TYPE and DEFINITION
LED “Open” Sign
Replacement of an existing neon
“open” sign with an LED “open”
sign.
SPECIFICATIONS
1. Replacement signs cannot use
more than 20 percent of the
input power of the sign that is
being replaced.
LED Channel Sign
<2 feet Interior
(A)
INCENTIVE
PER UNIT
(B)
NUMBER
OF UNITS
$40
per sign
________________
LED Channel Sign
>2 feet Interior
Replacement or retrofit of an
incandescent, HID, argonmercury or neon-lighted channel
letter >2 feet high with an LED
letter.
LED Screw-Based
Replacements for HID
Lamps 75W or less
Retrofit of a screw base HID
lamp between 100-250W with a
direct replacement screw base
LED lamp.
LED Screw-Based
Replacements for HID
Lamps > 75W
Retrofit of a screw base HID
lamp > 250W with a direct
replacement screw base LED
lamp.
1. The direct screw-base
replacement LED lamp must be
listed on the DesignLightsTM
Consortium Qualified Products
List available at http://www.
designlights.org
2. The retrofit lamp must be UL
listed and must not impact
existing UL listing.
3. Documentation from the LED
product manufacturer that
clearly defines compatibility of
the LED product with the
fixture being retrofitted must
accompany the application.
Number of signs:
$12
per letter
Number of letters:
$30
per letter
Number of letters:
$15
per lamp
Number of lamps:
$45
per lamp
Number of lamps:
Replacement or retrofit of an
incandescent, HID, argonmercury or neon-lighted channel
letter ≤2 feet high with an LED
letter.
(A x B)
INCENTIVE
________________
________________
________________
________________
$ 0.00
$ 0.00
$ 0.00
$ 0.00
$ 0.00
SUBTOTAL $
5
0.00
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
New T8/T5 Fluorescent Fixture with Electronic Ballast
SPECIFICATIONS
1. I ncentives are only available for new fixtures. New fixtures must contain all new components and be unopened at time of
purchase. (Retrofits may be eligible for incentives listed under fluorescent lighting retrofits on page 8 in this worksheet.)
2. T8/T5 lamps must have a CRI ≥ 80.
3. Ballasts must meet the following specs:
• High frequency (≥ 20 kHz)
• Power factor (PF) ≥ 0.90
• UL or ETL listed
• Warranted against defects for five (5) years
• Ballasts for 4-foot lamps must have total harmonic distortion (THD) ≤ 20 percent at full light output.
• For 2- and 3-foot lamps, ballasts must have THD ≤ 32 percent at full light output.
Please complete the watt reduction worksheet on the following page.
EQUIPMENT TYPE and DEFINITION
UNIT
INCENTIVE
New T8/T5 Fluorescent Fixture
with Electronic Ballast
Replacement of an existing interior lighting system
with a new lighting system containing T8/T5 fixtures
with T8/T5 lamp(s) and electronic ballasts (project
does not have to be a one-for-one replacement).
Reduction in connected watts
$0.30 per watt reduced
Maximum incentive is $150 per
installed fixture
6
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Watt Reduction Worksheet for New T8/T5 Fixtures
Use this worksheet or attach an itemized project plan. (See example in red.)
TYPE OF
EQUIPMENT
TO BE
REPLACED
example:
250W
metal halide
QUANTITY OF
EQUIPMENT
TO BE
REPLACED
WATTAGE OF
EQUIPMENT
TO BE
REPLACED
TOTAL
WATTAGE
OF OLD
EQUIPMENT
TYPE OF
NEW FIXTURE
TO BE
INSTALLED
QUANTITY
OF NEW
EQUIPMENT
WATTAGE
OF NEW
EQUIPMENT
TOTAL
WATTAGE
OF NEW
EQUIPMENT
DIFFERENCE
(OLD WATTAGE
MINUS NEW)
100
295
29,500
example:
4-lamp 4-ft T8
100
120
12,000
17,500
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
TOTAL NUMBER OF FIXTURES
0
SUBTOTAL OLD WATTAGE MINUS NEW
0
(A)
INCENTIVE PER UNIT
(B)
UNIT
(A x B)
INCENTIVE
New T8/T5 Fluorescent Fixtures with
Electronic Ballast
$0.30 per watt reduced
Watts reduced
(from worksheet above):
0
________________
$ 0.00
Your maximimum allowed incentive:
Maximum incentive is
$150 per installed fixture
EQUIPMENT TYPE
Number of fixtures:
0
________________
SUBTOTAL* $
*Actual incentive may be less, due to per-fixture cap
7
$ 0.00
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Fluorescent Lighting Retrofits
SPECIFICATIONS
1. T8/T5 lamps must have a CRI ≥ 80.
2. Ballasts must meet the following specs:
• High frequency (≥ 20 kHz)
• Power factor (PF) ≥ 0.90
• UL or ETL listed and must not impact existing UL or ETL listing
• Warranted against defects for five (5) years
• Ballasts for 4-foot lamps must have total harmonic distortion (THD) ≤ 20 percent at full light output.
• For 2- and 3-foot lamps, ballasts must have THD ≤ 32 percent at full light output.
3. This measure does not apply to channel signs, open signs or refrigerated display case lighting.
EQUIPMENT TYPE and DEFINITION
Fluorescent Lighting Retrofits
Replacement of an existing interior lighting system
with a retrofit lighting system containing T8/T5
lamps and electronic ballasts (project does not have
to be a one-for-one replacement).
UNIT
INCENTIVE
Reduction in connected watts
$0.20 per watt reduced
Watt Reduction Worksheet for Fluorescent Lighting Retrofits
Use this worksheet or attach an itemized project plan. (See example in red.)
TYPE OF
EQUIPMENT
TO BE
REPLACED
QUANTITY OF
EQUIPMENT
TO BE
REPLACED
WATTAGE OF
EQUIPMENT
TO BE
REPLACED
TOTAL
WATTAGE
OF OLD
EQUIPMENT
TYPE OF
NEW FIXTURE
TO BE
INSTALLED
QUANTITY
OF NEW
EQUIPMENT
WATTAGE
OF NEW
EQUIPMENT
TOTAL
WATTAGE
OF NEW
EQUIPMENT
DIFFERENCE
(OLD WATTAGE
MINUS NEW)
example:
4-ft, 4-lamp
T12 ES ballast
100
139
13,900
example:
4-ft, 4-lamp T8
80
100
8,000
5,900
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SUBTOTAL OLD WATTAGE MINUS NEW
EQUIPMENT TYPE
Flourescent Lighting Retrofits
(A)
INCENTIVE PER UNIT
(B)
UNIT
$0.20 per watt reduced
Watts reduced
(from worksheet above):
0
________________
0
(A x B)
INCENTIVE
$ 0.00
SUBTOTAL $ 0.00
8
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Induction Fixtures
SPECIFICATIONS
1. Induction fixture or retrofit must have a CRI ≥80 and a mean efficacy ≥50 lumens per watt (LPW).
2. The retrofit must not void the fixture’s UL or ETL listing.
EQUIPMENT TYPE and DEFINITION
UNIT
INCENTIVE
Induction Fixture
Replacement or retrofit of an existing interior
lighting system with a new lighting system
containing induction fixtures (project does not have to
be a one-for-one replacement).
Reduction in connected watts
$0.30 per watt reduced
Watt Reduction Worksheet for Induction Fixtures
Use this worksheet or attach an itemized project plan. (See example in red.)
TYPE OF
EQUIPMENT
TO BE
REPLACED
example:
250W
metal halide
QUANTITY OF
EQUIPMENT
TO BE
REPLACED
WATTAGE OF
EQUIPMENT
TO BE
REPLACED
TOTAL
WATTAGE
OF OLD
EQUIPMENT
100
295
29,500
TYPE OF
NEW FIXTURE
TO BE
INSTALLED
QUANTITY
OF NEW
EQUIPMENT
WATTAGE
OF NEW
EQUIPMENT
TOTAL
WATTAGE
OF NEW
EQUIPMENT
DIFFERENCE
(OLD WATTAGE
MINUS NEW)
80
150
12,000
17,500
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
example:
150W
induction
SUBTOTAL OLD WATTAGE MINUS NEW
EQUIPMENT TYPE
Induction Fixture
0
(A)
INCENTIVE PER UNIT
(B)
UNIT
(A x B)
INCENTIVE
$0.30 per watt reduced
Watts reduced
(from worksheet above):
0
________________
$ 0.00
SUBTOTAL $ 0.00
9
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Lighting Control Products
Use the watts controlled worksheet on page 11 to calculate watts controlled for each applicable measure.
(A)
INCENTIVE
PER UNIT
(B)
NUMBER
OF UNITS
Occupancy Sensors
1. Replacement of existing occupancy
sensors is not eligible for this
Installation of new occupancy
incentive.
sensors on a new or existing
lighting system. Passive
2. An inventory of the controlled
infrared, ultrasonic detectors
fixtures is required with the
and fixture-integrated
final application.
sensors or sensors with a
combination thereof are
eligible.
$0.10
per watt
controlled
Watts controlled:
Vacancy Sensors
Installation of new vacancy
sensors on a new or existing
lighting system. Passive
infrared and ultrasonic
detectors are eligible.
1. Replacement of existing vacancy
sensors is not eligible for this
incentive.
2. The control must be configured
such that manual input is required
to turn on the controlled lighting
and the control automatically
turns the lighting off.
3. An inventory of the controlled
fixtures is required with the final
application.
$0.10
per watt
controlled
Daylighting Controls
Installation of new daylighting
controls on a new or existing
lighting system in spaces
with reasonable amounts of
sunlight exposure and areas
where task lighting is not
critical. Controls can be on/
off, stepped, or continuous
(dimming).
1. The on/off controller should turn
off artificial lighting when the
interior illuminance meets the
desired indoor lighting level.
2. Daylight sensor controls are
required to be calibrated.
3. An inventory of the controlled
fixtures is required with the
final application.
$0.12
per watt
controlled
Occupancy Sensors Plus
Daylighting Controls
Installation of both
occupancy sensors and
daylighting controls to
control the same fixture.
1. Must meet all specifications for
occupancy sensors and daylighting
controls, above.
2. An inventory of the controlled
fixtures is required with the
final application.
$0.18
per watt
controlled
EQUIPMENT TYPE and DEFINITION
SPECIFICATIONS
________________
$ 0.00
Watts controlled:
________________
Watts controlled:
________________
$ 0.00
$ 0.00
Watts controlled:
________________
SUBTOTAL $
10
(A x B)
INCENTIVE
$ 0.00
0.00
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Lighting Control Products (continued)
EQUIPMENT TYPE and DEFINITION
(A)
INCENTIVE
PER UNIT
SPECIFICATIONS
Time Clocks for Lighting
Installation of time clocks
on interior and/or exterior
lighting.
1. Clocks must control on/off schedule
of lighting equipment and must
have a three-hour back-up system
to maintain the program schedule
during power outages.
2. Astronomical time clocks (where
on-off times are in accordance with
sunrise and sunset) are required
for outdoor lighting when
photocells are not in use.
3. An inventory of the controlled
fixtures is required with the
final application.
$0.03
per watt
controlled
Plug-Load
Occupancy Sensors
Installation of new passive
infrared and/or ultrasonic
plug load occupancy sensors.
1. Plug-load occupancy sensors must
control electricity-using equipment
in offices or cubicles, including
lighting, shared copiers and/or
printers.
$10
per sensor
installed
(B)
NUMBER
OF UNITS
(A x B)
INCENTIVE
Watts controlled:
________________
$ 0.00
Number of sensors
installed:
________________
$ 0.00
SUBTOTAL $ 0.00
Watts Controlled Worksheet for Lighting Control Products
TYPE OF SENSOR
example: occupancy
TYPE OF FIXTURE
(A)
NUMBER OF
FIXTURES
(B)
WATTS PER
FIXTURE
(A x B )
WATTS
CONTROLLED
6-lamp 4-ft T8
100
220
22,000
0
0
0
0
0
0
0
0
0
0
0
11
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
All Other Indoor Lighting Measures
Use this section to apply for incentives for lighting retrofits and replacements that are not listed above.
To qualify for incentives, lighting systems must:
• Meet or exceed an industry-established minimum performance criterion if one exists, or a program-established criterion if one
does not exist.
• Have a payback period between one and seven years.
Use baseline code ASHRAE 90.1 for new construction projects and projects that involve a change in building and/or space type.
LED products that are not listed on the DesignLightsTM Consortium Qualified Products List available at http://designlights.org
are not eligible for incentives. Additionally, applications for LED retrofits must include documentation from the LED product
manufacturer that clearly defines compatibility of the LED product with the fixture being retrofitted.
Linear LED tubes are not eligible for incentives.
If you need more room than what is available, you may attach a separate sheet.
Existing Lighting System
(A)
NUMBER OF
FIXTURES OR
SQUARE FEET
TYPE/DESCRIPTION
(B)
(C)
(A x B x C)/1000
FIXTURE WATTAGE ANNUAL HOURS TOTAL ANNUAL kWh
OR LIGHTING
OF OPERATION
POWER DENSITY
0
0
0
0
(D) TOTAL kWh OF EXISTING SYSTEM
New Proposed Lighting System
(A)
NUMBER OF
FIXTURES
TYPE/DESCRIPTION
(B)
FIXTURE
WATTAGE
(C)
ANNUAL HOURS
OF OPERATION
(A x B x C)/1000
TOTAL ANNUAL kWh
0
0
0
(E) TOTAL kWh OF NEW PROPOSED SYSTEM
Incentive Calculation
INCENTIVE
Annual electric savings in kWh (D -E)
MEASURE LIFE
Estimated life of measure (in years)
PAYBACK PERIOD
0
X $0.05 = $ 0.00
0
Total project cost
=
Estimated annual electric savings
(in dollars)
SUBTOTAL $
0.00
TOTAL INCENTIVE REQUESTED $
0.00
Incentive cannot exceed 100 percent of the incremental measure cost and 50 percent of the
total project cost and must meet all program terms and conditions.
12
0
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
Default Fixture Wattage Reference Table
This table is to be used as a reference for determining the wattage of baseline (existing) fixtures. Wattages for all new (proposed)
fixtures should be referenced from the new product specifications.
There are many factors that affect the input wattage of a fixture: ballast factor, lamp quality, system voltage, etc. The more information that is provided about your project, the more accurate the incentive and energy savings calculations can be. If there is any
doubt as to which fixture type is correct, the conservative wattage will be used. To ensure that the wattages used in incentive calculations are as accurate as possible, pictures are recommended for all of the fixture types listed below in Blue.
This table is made up of the most common fixtures but does not include all fixture types. T12 fixtures are listed with energy-saving
(ES) magnetic ballasts and standard magnetic ballasts. If a fixture type is not listed on this table, it does not necessarily mean
that the fixture is not eligible for an incentive. Please visit ComEd.com/BizIncentives or call us at 855-433-2700 if you have any
questions.
T12
NUMBER OF
LAMPS PER
FIXTURE
2-FT 20W
LAMPS
3-FT 30W
LAMPS
4-FT 34W
U-LAMPS
1
28
37
43
2
56
74
72
3
62
111
115
4
112
148
6
146
4-FT 40W U-LAMP(S) WITH ES
MAGNETIC BALLASTS (STANDARD
MAGNETIC BALLASTS)
4-FT 34W LAMP(S)
WITH ES MAGNETIC
BALLAST
85 (96)
8
4-FT 34W LAMP(S)
WITH STANDARD
MAGNETIC BALLAST
4-FT 40W LAMP(S)
WITH ES MAGNETIC
BALLAST
4-FT 40W LAMP(S)
WITH STANDARD
MAGNETIC BALLAST
40
50
48
57
68
80
82
94
110
130
122
147
139
160
164
182
216
236
258
282
288
T12 8-FT
NUMBER OF
LAMPS PER
FIXTURE
60W
LAMP(S)
WITH ES
MAGNETIC
BALLAST
60W LAMP(S)
WITH
STANDARD
MAGNETIC
BALLAST
75W LAMP(S)
WITH ES
MAGNETIC
BALLAST
75W LAMP(S) WITH
STANDARD
MAGNETIC BALLAST
HO 95W LAMP(S)
WITH ES MAGNETIC
BALLAST (STANDARD)
HO 110W LAMP(S)
WITH ES MAGNETIC
BALLAST (STANDARD)
VHO 185W
LAMP(S) WITH
MAGNETIC
BALLAST
T12 VHO 215W
LAMP(S) WITH
MAGNETIC BALLAST
1
62
75
91
100
104 (112)
132 (145)
205
230
2
123
128
158
173
207 (227)
237 (257)
380
450
3
203
210
237
311 (380)
369 (392)
585
680
4
246
256
346
414 (454)
474 (514)
760
900
316
T8
NUMBER OF
LAMPS PER
FIXTURE
2-FT 17W LAMPS
3-FT 25W LAMPS
4-FT 32W
U-LAMPS
4-FT RW 25W
LAMP(S)
4-FT RW 28W
LAMP(S)
4-FT 32W
LAMP(S)
8-FT 59W
LAMP(S)
8-FT HO 86W
LAMP(S)
1
16
23
28
24
26
32
62
85
2
32
46
56
44
50
59
124
160
3
48
69
89
66
74
88
186
4
64
92
90
99
114
248
5
6
148
134
134
175
8
224
13
328
320
INDOOR LIGHTING INCENTIVES WORKSHEET
June 1, 2016 through May 31, 2017
T5
NUMBER OF LAMPS
PER FIXTURE
2-FT 14W LAMPS
2-FT 24W HO LAMPS
4-FT 28W LAMPS
4-FT 54W HO LAMPS
1
18
27
32
62
2
34
52
64
117
3
52
79
96
179
4
68
104
128
240
6
192
360
8
256
468
HID
NOMINAL WATTS
PULSE START METAL
HALIDE
METAL HALIDE
50
72
70
95
74
66
93
100
128
150
190
175
208
200
232
250
288
350
400
400
456
450
506
215
125
138
188
205
250
295
290
295
455
455
465
780
700
750
818
850
1000
1080
1080
1610
© Commonwealth Edison Company, 2016
The ComEd Energy Efficiency Program is funded by ComEd customers in compliance with Illinois law.
PY9_IndoorLighting_0616-4
HPS
95
75
1500
MERCURY VAPOR
14
835
1075
1100