VJ Series RuGGed Multilayer Ceramic Chip Capacitors
New RuGGed Capacitors for Power Supply Applications
FEATURES
• Rugged, surface-mountable, multilayer ceramic capacitors
• At 120 Hz, ESR of 100-V-rated RuGGed chip is typically less than a quarter
that of an aluminum electrolytic capacitor with the same capacity and
voltage rating
• Efficient low-power consumption: ripple current < 1.2 Arms
• High reliability compared to standard design
APPLICATIONS
• High-frequency filtering for switching power supplies
• Input filter capacitors
• Output filter capacitors
• Snubber capacitors to reduce MOSFET voltage spikes
w w w. v i s h a y. c o m
The datasheet for model RuGGed Chip is available on our web site at
www.vishay.com/doc?45031
PRODUCT SHEET
CAPACITORS – Model RuGGed Chip
0.098 ± 0.008
[2.50 ± 0.20]
0.126 ± 0.008
[3.20 ± 0.20]
0.252 ± 0.010
[6.40 ± 0.25]
0.197 ± 0.008
[5.00 ± 0.20]
0.262 ± 0.010
[6.65 ± 0.25]
0.126 ± 0.008
[3.20 ± 0.20]
0.177 ± 0.010
[4.50 ± 0.25]
0.177 ± 0.010
[4.50 ± 0.25]
0.228 ± 0.008
[5.79 ± 0.20]
0.220 ± 0.010
[5.59 ± 0.25]
VJ1210
VJ1812
VJ1825
VJ2220
VJ2225
DIELECTRIC
Y = X7R
CASE
CODE
1206
X
B
0.086 [2.18]
0.086 [2.18]
0.086 [2.18]
0.086 [2.18]
0.067 [1.68]
0.067 [1.68]
MAXIMUM
THICKNESS (T)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
824 = 820000 pF
M = ± 20 %
K = ± 10 %
J=±5%
F = AgPd
X = Ni barrier
100% tin
plated.
L = 630 V
E = 500 V
C = 200 V
B = 100 V
A = Unmarked
MARKING
A
T
T = 7” reel /
plastic tape
PACKAGING
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
MINIMUM
3E = RuGGed
PROCESS
CODE
3E
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
0.030 [0.76]
MAXIMUM
TERMINATION PAD
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current does
not exceed 50mA
� 200V DC : DWV at 250 % of rated voltage.
500V DC : DWV at 200 % of rated voltage.
630V DC : DWV at 150 % of rated voltage.
Insulation Resistance (IR):
At + 25 °C and rated voltage 100,000 M� minimum or
1000 �F, whichever is less.
CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE
NOMINAL
TOLERANCE
RATING 1)
CODE
824
Note
1. DC voltage rating should not be exceeded in application
2225
2220
1825
1812
1210
Y
VJ1812
K
0.063 ± 0.008
[1.60 ± 0.20]
0.126 ± 0.008
[3.20 ± 0.20]
VJ1206
ORDERING INFORMATION
WIDTH
LENGTH
PART
ORDERING
NUMBER
DIMENSIONS in inches [millimeters]
Aging Rate: 1 % maximum per decade.
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 Vdc applied.
Voltage Rating: 100 Vdc to 630 Vdc.
Capacitance Range: 5.6 nF to 1.8 µF.
Operating Temperature: - 55 °C to + 125 °C.
NOTE: Electrical characteristics at + 25 °C unless otherwise
specified.
GENERAL SPECIFICATIONS
FEATURES
• Rugged, surface-mountable, multilayer ceramic
capacitors, made with Advanced X7R dielectric.
• Efficient low-power consumption, ripple current capable to
1.2 Arms at 100kHz
• High voltage breakdown compared to standard design.
• Excellent reliability and thermal shock performance.
• Ideal for Power Supplies.
0.68 µF
0.82 µF
1.00 µF
1.20 µF
1.50 µF
1.80 µF
2.00 µF
684
824
105
125
155
185
205
500
630
1206
100
200
500
1210 1)
630
100
200
500
1812 1)
630
Note
1 See page 55 for soldering recommendations, or visit www.vishay.com/doc?45034
0.47 µF
0.39 µF
0.56 µF
0.33 µF
394
564
0.27 µF
334
474
0.22 µF
274
68 nF
683
0.20 µF
56 nF
563
224
47 nF
473
0.18 µF
39 nF
393
204
33 nF
333
0.15 µF
27 nF
273
184
22 nF
223
0.12 µF
20 nF
203
154
18 nF
183
124
15 nF
153
82 nF
12 nF
123
0.1 µF
10 nF
103
104
8.2 nF
822
823
5.6 nF
6.8 nF
682
4.7 nF
472
562
CAP.
CAP.
CODE
VOLTAGE (Vdc)
CASE TYPE
RUGGED CHIP FOR POWER SUPPLY APPLICATIONS
Multilayer Ceramic Chip Capacitors
Revision 01-Oct-04
100
200
1825 1)
500
100
500
100
200
2225 1)
500
VMN-PT9060-0410
200
2220 1)
Vishay Vitramon
VJ RuGGed Chip