OIL FILLER
AND
AIR BREATHER
FILLER CAPS
The complete series of oil filter and breather filler caps makes
Temperature
it possible to meet all market demands. Metal and plastic
• from -13°F to +230°F
styles suitable for use on mobile equipment are available.
Filler caps perform a dual function, air filtration at the tank inlet
and prefiltration of the fluid by means of the strainer, in order
to prevent the ingress of foreign material into the tank during
filling and top-up operations.
Correct operation of breather filters makes for longer life of the
filter cartridges installed in the hydraulic circuit, and in
applications where high level of contamination are present.
10
Compatibility
• NBR seals and Cork Gasket, compatible with:
Mineral oils to ISO 2943 - aqueous emulsions
Synthetic fluids, glycol water.
• FPM seals, compatible with:
Synthetic fluids type HS-HFDR-HFDS-HFDU.
Metal oil filler and
breather caps
TA 46
Series
1
Dimensions
2
3
Bayonet connection
4
5
Ø 1.87”
6
1.83”
4
Reservoir
holes
7
8
2.52”
M5
TA46 B (Materials)
1 - Cover: Chrome plated steel
2 - Breather element: Resin impregnated cellulose
Ø 1.10”
Ø 1.18”
Ø 2.05”
Ø 1.62”
3 - 6 - Flange: Galvanized Steel
4 - Seals: NBR
Cork Gasket
5 - Screws: Galvanized Steel
7 - Chain, ring: Brass
8 - Strainer: Galvanized Steel
Ordering information
Flow rates with Δp: 0.30 psi
Filtration
cfm
3 µm
5
Filler series
10 µm
7
TA46
Example: TA46
1
2
3
4
5
6
7
B
03
A
0
C
1
P01
Weight
TA 46: 0.22 lbs
TA 46 B
Bayonet connection
1 - Connection to reservoir
B
Flange with bayonet connection
2 - Filter element
Non-removable strainer
03
3 µm
10
10 µm
3 - Seals
A
NBR
B
Cork Gasket
5 - Variations
0
Standard
C
With chain
6 - Strainer
0
Without strainer
1
With L= 2.6”
7 - Options
P01
MP Standard
4 - Valves
0
Without
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
11
Series
Metal filler /
breather caps
TA 80
TA80 B/D (Materials)
Flow rates with Δp: 0.30 psi
1
1 - Cover: Chrome plated steel
Filtration
2
2 - Breather element: Resin impregnated cellulose
3
4
3 - Pressurization valve:
Bodies: Nylon
Spring: Steel
6
Seals: NBR
10 µm
19
Strainer L 3.2”: 0.73 lbs
Strainer L 6.0”: 0.77 lbs
5
4 - Flange and anti-splash feature: Galvanized Steel
7
5 - Seals: Cork Gasket
5
16
Weight
End cap-disk: Galvanized Steel
5
cfm
3 µm
NBR
8
6 - Screws and washers: Galvanized Steel
9
7 - Flange: Galvanized Steel
8 - Chain, ring: Brass
9 - Strainer TA80B: Galvanized Steel
TA 80 B
TA 80 B
TA 80 D
Bayonet connection
Bayonet connection
Bayonet connection
Non-removable strainer
With Padlock Hasp
Removable strainer
TA80B00....P01
TA80B10....P01
TA80B03.9..P01
TA80B10.1..P01
Bayonet connection
Bayonet connection
Bayonet connection
Bayonet connection
Closed filler cap without
Filler cap with filter element
Filler cap with anti-splash
Filler cap with pressurization
feature and filter element
valve and filter element
filter element
12
Dimensions
Weld flange
Bayonet connection
2.3”
Ø 3.15”
2.18”
Ø 3.15”
Ø 0.256”
0.96”
2.4”
Reservoir
holes
Ø 2.874”
L
4”
Ø 2.01”
Ø 1.97”
Ø 1.46”
Ø 3.27”
Ø 1.57”
M5
Ø 3.27”
Ordering information
Filler series
1
2
3
4
5
6
7
B
03
A
1
L
2
P01
TA80
Example: TA80
1 - Connection to reservoir
5 - Variations
B
Flange with bayonet connection
0
Standard
D
Weld flange
L
With Padlock Hasp (B versions only)
2 - Filter element
00
6 - Strainer
Without filter (Blank filler cap)
0
Without strainer
03
3 µm
1
With L= 3.2” (B versions only)
10
10 µm
2
With L= 6.0” (B versions only)
3
With L= 4.0” (D versions only)
3 - Seals
7 - Options
A
NBR
B
Cork Gasket
P01
MP Standard
4 - Valves
0
1
Without
4.5 psi pressurization valve
(only with seals NBR)
2
10 psi pressurization valve
9
Anti-splash feature (only with filter element 3 µm)
(only with seals NBR)
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
13
Series
Nylon filler /
breather caps
TAP 90
1
TAP90 (Materials)
Flow rates with Δp: 0.30 psi
1 - Cover/ringnut: Nylon
Filtration
2 - Breather filter: Resin impregnated cellulose
Polyurethane
2
3 µm
16
10 µm
19
3 - Pressurization valve:
Nylon
3
Galvanized Steel
6
4
5
cfm
Weight
Strainer L 4.8”: 0.40 lbs
Strainer L 10”: 0.46 lbs
NBR
4 - Seal: NBR
5 - Flange B: Nylon
4
7
6 - Screws: Galvanized Steel
7 - Padlock hasp: Galvanized Steel
9
8
9 - Dipstick: Phosphated steel
10
14
8 - Chain, ring: Brass
10 - Strainer: Galvanized Steel/Nylon
TAP90 B.....
Flange with
bayonet connection
TAP90 R.....
Flange with
M52x2 connection
External chain
Internal chain
TAP90 F.....
Flange with spigot
DIN 24557 Connection
M52x2
Internal chain
TAP90 C.....
Weld riser
Connection
M52x2
Weld riser in
galvanized steel,
internal chain
TAP90 B-C-R-F
TAP90 B-C-R-F
TAP90 B-C-R-F
TAP90 B-C-R-F
With dipstick
Closed filler cap without
Filler cap with filter
Filler cap with
filter element
element
pressurization valve
Dimensions
TAP90 B - R
TAP90 C
TAP90 F
Ø 3.6”
Ø 3.6”
Ø 3.6”
2.5”
1.7”
2.5”
L
L
5.8”
0.35”
2.52”
2.52”
2.5”
Ø 1.7”
Ø 1.7”
Ø 2.874”
Ø 2.3”
Ø 2.48”
Ø 2.874”
Ø 2.874”
Ø 2.874”
Ø 2.36”
Ø 2.36”
M5
M5
Filler series
1
2
3
4
5
6
7
B
03
A
1
0
5
P01
Ordering information
TAP90
Example: TAP90
1 - Connection to reservoir
5 - Variations
B
Flange with bayonet connection
0
Standard
C
Weld riser (M52X2 version only)
L
With Padlock Hasp
F
Flange with threaded M52x2 connection
Spigot Ø 60 (DIN 24557)
A
With Dipstick
C
With Chain external for
connection B
With Chain internal for
connection C-F-R (with strainer only)
D
With Padlock Hasp and external chain for
cap retainment B
With Padlock Hasp and internal chain for
cap retainment C-F-R (with strainer only)
R
Flange with M52X2 threaded connection
2 - Filter element
00
Without filter (Blank filler cap)
03
3 µm
10
10 µm
E
Dipstick and chain external
(only connection B)
3 - Seals
A
F
Dipstick and Padlock Hasp
G
Dipstick, Padlock Hasp and chain
external (only connection B)
NBR
4 - Valves
6 - Strainer
0
Without
1
4.5 psi pressurization valve
2
10 psi pressurization valve
In the version with chain the L= 4.8” strainer features a press fitting.
0
Without strainer
1
L= 4.8”
3
L= 10”
Stainless steel strainer on request
7 - Options
P01
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
15
Nylon filler /
breather caps
TAP 114
Series
2
3
6
5
1
4
TAP114 (Materials)
1 - Flange: Nylon
Example
TAP114
Example
TAP114
Length 1
Length 2
2 - Cover: Nylon
3 - Breather filter: Resin impregnated
cellulose
4 - Seal: NBR
5 - Screws: Galvanised Steel
6 - Strainer: Nylon
Dimensions
Flow rates with Δp: 0.30 psi
TAP 114
Length 1
Lenght
A
1.61”
2.2”
A
1
2
Filtration
cfm
10 µm
52
Length 2
Filtration
cfm
10 µm
57
4.5”
Weight
TAP 114 1: 0.41 lbs
TAP 114 2: 0.44 lbs
Ø 1.57”
Reservoir holes
Ø 2.87”
Ø 4.5”
Ø 2.01
M5
16
1
2
3
TAP 114 spare par ts
Item.
Description
Qty
Filler cap series
TAP 114
1
Complete filler cap
1
See order table
2
Filter Element
1
See order table
3
Seal
1
NBR
FPM
01026306
01026332
Ordering information
Filler cap
series
TAP114
1
2
3
4
5
Example: TAP114
2
L10
A
1
P01
Filter
Element
1
2
5
2
L10
P01
A114
Example: A114
1 - Length
4 - Strainer
1
0
Without strainer
2
1
L= 4.5”
2 - Filter element
L10
5 - Options
Resin impregnated cellulose 10 µm
P01
MP Filtri standard
3 - Seal
A
NBR
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
17
Series
Nylon filler /
breather caps
TAP 115
Clogging indicator
option
1
2
3
4
5
TAP115 (Materials)
1 - Cover/Flange: Nylon
2 - Breather filter: Resin impregnated cellulose or Microfiber
3 - Seals: NBR
FPM
Example
TAP115
Example
TAP115
Length 1
Without Indicator
Length 2
With Indicator
4 - Screws: Galvanized Steel
5 - Strainer: Galvanized Steel/Nylon
Clogging indicator
Set pressure: - 0.9 psi ± 10 %
Manual reset
Dimensions
Flow rates with Δp: 0.30 psi
Filtration
Visual
Indicator
3.55”
0,9”
TAP 115
cfm
3 µm
64
10 µm
71
Length 2
6..10”
2.2”
0,9”
Filtration
cfm
3 µm
76
10 µm
76
Weight
TAP 115 2: 1.29 lbs
Ø 4.6”
1.73”
Ø 4.6”
1.73”
3.58”
TAP 115 1: 1.01 lbs
Reservoir holes
Ø 2.01”
4.3”
4.3”
Ø 2,87”
M5
18
Ø 1.73”
Ø 1.73”
Ø 2,87”
Ø 2,87”
Changing the filter
element in
TAP 115 series filler caps
3 Replace the filter element and replace
the cover and a hand a tighten
(DO NOT OVER TIGHTEN).
1 Thoroughly clean the filler cap and
adjacent par ts before disassembly.
2 Unscrew and lift of f the cover.
3a
TAP 115 spare par ts
Item.
Description
Qty
Filler cap series
TAP 115
1
Complete unit
1
See order table
2
Filter Element
1
See order table
3
Indicator Kit
1
3a
Visual indicator
1
S62P01
3b
Seal
1
O-R 3106 ID 1.05” X 103”
3c
Indicator securing screw
1
01022670
O-R indicator
1
O-R 2112 ID 1.114” x 070”
3d
NBR
FPM
02005187
02005188
1
3d
3b
3c
2
Ordering information
1
Filler series
2
3
4
5
6
7
A
1
B
P01
TAP115
Example: TAP115
2
F
A03
Filter element
1
3
7
2
A03
P01
A115
Example: A115
1 - Length
5 - Strainer
1
0
Without
2
1
With L= 4.8”
2 - Connection
F
6 - Indicator
Flange
3 - Filter element
A
Without
B
Visual indicator
7 - Options
L10
Resin impregnated cellulose 10 µm
A03
Inorganic microfiber 3 µm
P01
MP Standard
4 - Seals
A
NBR
V
FPM
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
19
SMF
Series
Nylon inclined flange
SMF (Materials)
3
1 - Flange: Nylon
2 - Seals: NBR
Cork Gasket
2
3 - Screws: Galvanized/Phosphated steel
Weight
SMF: 0.72 lbs
1
Dimensions
Reservoir holes
4.6”
2.01”
3.2”
0.35”
0.7”
0.3”
2.01”
3.50”
0.47”
2.99”
2.01”
5.83”
5.83”
1.-18”
4.6”
M6 or
1/4” UNC
2.01”
Ordering information
1
2
3
M
A
P01
SMF 1
Example: SMF 1
1 - Connection to reservoir
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
2 - Seals
A
NBR
B
Cork Gasket
3 - Options
P01
20
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
0.3”
• Nylon inclined flange
Series
• Metal filler /
breather caps
TAF 80
Dimensions
TAF 80 B
7.3”
0.71”
Max for strainer
Ø 2” L= 3.15”
40°
4.6”
Flow rates with Δp: 030 psi
Filtration
For tank hole see “SMF 1”
page 18.
cfm
3 µm
16
10 µm
19
Weight
TAF 80: 1.44 lbs
Ordering information
1
2
3
4
5
6
7
8
B
03
A
1
L
1
M
P01
TAF80
Example: TAF80
1 - Filler cap connection
B
5 - Variations
Flange with bayonet connection
2 - Filter element
00
0
Standard
L
With Padlock Hasp
6 - Strainer
Without filter (Blank filler cap)
03
3 µm
0
Without
10
10 µm
1
With L= 3.2”
7 - Connection to reservoir
3 - Seals
A
NBR
M
Fixing with Metric screws (M6)
B
Cork Gasket
U
Fixing with UNC screws (1/4” UNC)
8 - Options
4 - Valves
P01
0
Without
1
4.5 psi pressurization valve
2
10 psi pressurization valve
9
Anti-splash feature (only with filter element 3 µm)
MP Standard
Only with
seal NBR
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
21
• Nylon inclined flange
TAF 90
Series
• Nylon filler /
breather caps
Dimensions
TAF 90 B - R - F
TAF 90 ...
C
A
40°
cfm
3 µm
16
10 µm
19
A
B
C
1.60”
1.90”
4.6”
4.3”
7.3”
7”
TYPE
Flow rates with Δp: 0.30 psi
Filtration
B
TAF90 B - R
TAF90 F
For tank hole see “SMF 1”
page 18.
Weight
TAF 90: 1.18 lbs
Ordering information
1
2
3
4
5
6
7
8
B
03
A
1
L
1
M
P01
TAF90
Example: TAF90
1 - Filler cap connection
5 - Variations
B
Flange with bayonet connection
0
Standard
F
Flange with threaded connection M52x2
Spigot Ø 60 (DIN 24557)
L
With Padlock Hasp
R
Flange with threaded connection M52x2
C
With Chain external for
connection B
With Chain internal for
connection F-R (with strainer only)
D
With Padlock Hasp and external chain for
cap retainment B
With Padlock Hasp and internal chain for
cap retainment F-R (with strainer only)
2 - Filter element
00
Without filter (Blank filler cap)
03
3 µm
10
10 µm
6 - Strainer
3 - Seals
A
0
Without
1
With L= 4.8”
NBR
7 - Connection to reservoir
4 - Valves
0
Without
1
4.5 psi pressurization valve
2
10 psi pressurization valve
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
8 - Options
P01
22
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
• Nylon inclined flange
Series
• Nylon filler /
breather caps
TAF 115
Dimensions
TAF 1151 F
TAF 115
B
1.4”
40°
A
Flow rates with Δp: 0.30 psi
Length 1
Length 2
Filtration
cfm
Filtration
Length
A
B
1
2
5.7”
7.4”
8.5”
10.5”
cfm
3 µm
64
3 µm
76
10 µm
71
76
Weight
10 µm
Weight
TAF 115 1: 1.73 lbs
TAF 115 2: 2.01 lbs
For tank hole see “SMF 1”
page 18.
Ordering information
1
2
3
4
5
6
7
8
2
F
A03
A
1
B
M
P01
TAF115
Example: TAF115
1 - Filler cap length
5 - Strainer
1
0
Without
2
1
With L= 4.8”
6 - Indicator
2 - Connection
F
Flange
A
Without
B
Visual indicator
3 - Filter element
7 - Connection to reservoir
L10
Resin impregnated cellulose 10 µm
A03
Inorganic microfiber 3 µm
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
4 - Seals
A
NBR
V
FPM
8 - Options
P01
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
23
Aluminium inclined
flange
SML
Series
Aluminium inclined flange
1
SML (Materials)
1 - Flange: Aluminum
2 - Screws: Phosphated steel
2
3 - Seals: NBR
Cork Gasket
Weight
SML: 0.84 lbs
3
Dimensions
4.86”
5.5”
3.54”
2.05”
4.8”
2.05”
3.86”
2.36”
3.15”
M6
1/4” UNC
3.9”
0.7”
3.04”
Ordering information
1
2
3
M
A
P01
SML 1
Example: SML 1
1 - Connection to reservoir
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
2 - Seals
A
NBR
B
Cork Gasket
3 - Options
P01
24
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
• Aluminum inclined flange
TAL 80
Series
• Metal filler /
breather caps
Dimensions
7.1”
TAL 80 B
4.5”
2.84”
43°
Max for strainer
Ø 2” L= 5.9”
Flow rates with Δp: 0.30 psi
For tank hole see “SML 1”
page 22.
Filtration
cfm
3 µm
16
10 µm
19
Weight
TAL 80 1: 1.57 lbs
Ordering information
1
2
3
4
5
6
7
8
B
03
A
1
L
2
M
P01
TAL80
Example: TAL80
1 - Filler cap connection
B
5 - Variants
Flange with bayonet connection
2 - Filter element
00
0
Standard
L
With padlock hasp
6 - Strainer
Without filter (Blank filler cap)
03
3 µm
0
Without
10
10 µm
1
With L= 3.15”
2
With L= 6.0”
3 - Seals
A
NBR
B
Cork Gasket
7 - Connection to reservoir
4 - Valves
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
8 - Options
0
Without
1
4.5 psi pressurization valve
2
10 psi pressurization valve
9
Anti-slosh feature (only with filter element 3 µm)
Only with
seal NBR
P01
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
25
• Aluminum inclined flange
TAL 90
Series
• Nylon filler /
breather caps
Dimensions
TAL 90 B - R - F
TAL 90 ...
C
A
43°
Flow rates with Δp: 0.30 psi
Filtration
TYPE
cfm
3 µm
16
10 µm
19
TAL90 B - R
TAL90 F
B
A
B
C
1.9”
2.2”
4.4”
4.2”
7.0”
6.7”
For tank hole see “SML 1”
page 22.
Weight
TAL 90: 1.23 lbs
Ordering information
1
2
3
4
5
6
7
8
B
03
A
1
L
1
M
P01
TAL90
Example: TAL90
1 - Filler cap Connection
5 - Variants
B
Flange with bayonet connection
0
Standard
F
Flange with threaded connection
M52x2 Spigot Ø 60 (DIN 24557)
L
With Padlock Hasp
R
Flange with threaded connection M52x2
C
With Chain external for
connection B
With Chain internal for
connection F-R (with strainer only)
2 - Filter element
00
Without filter (Blank filler cap)
03
3 µm
10
10 µm
3 - Seals
A
NBR
D
6 - Strainer
0
Without
1
With L= 4.8”
7 - Connection to reservoir
4 - Valves
0
Without
1
4.5 psi pressurisation valve
2
10 psi pressurisation valve
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
8 - Options
P01
26
With Padlock Hasp and external chain for
cap retainment B
With Padlock Hasp and internal chain for
cap retainment F-R (with strainer only)
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
• Aluminum inclined flange
TAL 115
Series
• Nylon filler /
breather caps
Dimensions
TAL 115 1 F
TAL 115
B
1.7”
43°
A
Flow rate with Δp: 0.30 psi
Length 1
Length 2
Filtration
cfm
Filtration
Length
A
B
1
2
5.6”
7.4”
8.2”
10.1”
cfm
3 µm
64
3 µm
76
10 µm
71
10 µm
76
Weight
Weight
TAL 115 1: 1.85 lbs
TAL 115 2: 2.13 lbs
For tank hole see “SML 1”
page 22.
Ordering information
1
2
3
4
5
6
7
8
2
F
A03
A
1
B
M
P01
TAL115
Example: TAL115
1 - Filler cap length
5 - Strainer
1
0
Without
2
1
With L= 4.8”
2 - Connection
F
6 - Indicator
Flange
3 - Filter element
L10
Resin impregnated cellulose 10 µm
A03
Inorganic microfiber 3 µm
4 - Seals
A
NBR
V
FPM
A
Without
B
Visual indicator
7 - Connection to reservoir
M
Fixing with Metric screws (M6)
U
Fixing with UNC screws (1/4” UNC)
8 - Options
P01
MP Standard
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
27
Universal adapter for oil filling to reser voir.
ATS
Series
Possible use with oil filter/filler breather caps type:
- TA
80
- TAP
90
- TAP 115
- SCS 100 F
Dimensions
Adapter for
Filler and breather plugs
Ø 3.54”
Ø 1.61”
A
Ø 2.874
0.43”
Ø 1.61”
3.07”
2.64”
Oil filling
0.43”
B
Air inlet/outlet
2
Reservoir
holes
ATS (Materials)
1 - Adapter: Anodized Aluminum
2 - Screws: Steel
M5
1
3 - Seals: NBR
FPM
Cork Gasket
3
Weight
ATS: 2.20 lbs
Ø 1.97”
Ø 2.874”
Ordering information
Adapter for
filler caps
1
2
3
G1
A
P01
Connection
A
B
G1
G2
G 3/4”
SAE 12
G 3/4”
1 1/16” 12 UN
ATS 1
Example: ATS 1
1 - Connection
3 - Options
G1
G 3/4”
G2
SAE 20 (1 - 1/16” 12 UN)
P01
MP Standard
2 - Seals
28
A
NBR
B
Cork Gasket
V
FPM
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.