Installation/Operating Instructions
Ceiling Trim Kit for Scissor Lift SLX by Draper
Installing Optional Ceiling Trim Kit "SLX"
The lower section of the Environmental Air Space Housing is available as part
of a ceiling trim kit, to finish out the ceiling opening even if a housing is not
necessary. This kit consists of the lower section of the housing and the ceiling
closure panel. Please refer to drawing below for these instructions.
① Install Scissor Lift SLX (as described in Scissor Lift SLX instructions).
② Install bottom section of Environmental Air Space Housing in opening. This
can be accomplished by suspending with wire, or by mounting directly to
the ceiling joists (if space permits).
③ Install ceiling closure panel (see separate instructions).
7 8
2
3
6
10
9
5
6 4
1
Item Qty
①
1
②
1
③
2
④
8
⑤
8
⑥
⑦
⑧
⑨
⑩
16
4
4
1
4
Part Number
C028.546.07SA
C044.181.07SA
C002.845.07SA
C013.050
Description
Frame, SLX Closure Trim
Panel, Assembled SLX Closure
Bracket, SLX Closure
Washer .375" I.D. x .875" O.D. x
.064" TK GRD 2 Zinc Flat
C020.082
Screw, 10-16 X ½"
6 Lobe Truss Head AB E-White
C018.027
Nut 3/8"-16 Hex Grd 2 NSF
C020.322
Screw, 5/16" - 18 x ¾" Long Grade 5 HH Zinc
C018.045
Nut 5/16"-18 Zinc Hex Keps
C028.545.07SA
Frame, SLX Trim Ring
C077.037.49
Rod, Threaded 3/8"-16 x 213/8" L Zinc
Top View
4111/16"
409/16"
4111/16"
409/16"
3513/16"
353/8"
20¼"
4"
3911/16"
42"
3911/16"
42"
Front/Back View
19/16"
Side View
®
Copyright © 2011 Draper Inc. Form ScissorLiftSLX-TrimKit_Inst11
Printed in U.S.A.
If you encounter any difficulties installing or servicing your Scissor Lift SLX, call your
dealer or Draper, Inc. in Spiceland, Indiana, 765-987-7999, or fax 765-987-7142.
Ceiling Trim Kit for Scissor Lift SLX by Draper
page 2 of 2
Installing Optional Ceiling Trim Kit "SLXR"
The lower section of the Environmental Air Space Housing is available as part
of a ceiling trim kit, to finish out the ceiling opening even if a housing is not
necessary. This kit consists of the lower section of the housing and the ceiling
closure panel. Please refer to drawing below for these instructions.
① Install Scissor Lift SLX (as described in Scissor Lift SLX instructions).
② Install bottom section of Environmental Air Space Housing in opening. This
can be accomplished by suspending with wire, or by mounting directly to
the ceiling joists (if space permits).
③ Install ceiling closure panel (see separate instructions).
3
7 8
10
6
9
6 4
1
2
5
Item Qty
①
1
②
1
③
2
④
8
⑤
10
⑥
⑦
⑧
⑨
⑩
16
4
4
4
1
Part Number
C028.624.07SA
C044.205.07SA
C002.932.07SA
C013.050
Description
Frame, SLXR Closure Trim
Panel, Assembled SLXR Closure
Bracket, SLXR Closure
Washer .375" I.D. x .875" O.D. x
.064" TK GRD 2 Zinc Flat
C020.082
Screw, 10-16 X ½"
6 Lobe Truss Head AB E-White
C018.027
Nut 3/8"-16 Hex Grd 2 NSF
5
C020.322
Screw, /16" - 18 x ¾" Long Grade 5 HH Zinc
C018.045
Nut 5/16"-18 Zinc Hex Keps
C077.037.49
Rod, Threaded 3/8"-16 x 213/8" L Zinc
C028.626.07SA
Frame, SLXR Trim Ring
Top View
4113/16"
353/8"
19¾"
3911/16"
42"
4511/16"
48"
Front/Back View
www.draperinc.com
Side View
(765) 987-7999
19/16"