Water Flowmeters and Basic Visual Indicators U For 1⁄4 to 1" Pipe Sizes U Visual Inspection of Fluid U Compact, Rugged Design in ue FLMW201 shown larger than actual size. D is co nt The FLMW200 Series represents an economical way to monitor municipal-pressure water flows, observe case drain flows, and verify pump outputs. These flowmeters have a low-mass axial turbine, urged toward zero flow rate by a precision torsion spring. As fluid flows past the turbine blades, a rotational torque is imposed on the turbine and spring, causing the turbine to rotate to a position at which the spring’s return force equals the fluid torque. Since variable fluid flow rate causes variable fluid torque, flow rate is measured by correlating turbine rotational displacement to flow rate. FLMW200 Series flowmeters can be installed in any orientation—horizontal, vertical, or inverted. No straight pipe runs are required. Several flow ranges are available for a user’s specific application needs. The FLMW210 Series consists of strictly flow/no flow indicators. Fluid flow rotates the flow indicator’s turbine predictably. FLMW210 Series indicators positively display fluid flow if the turbine is rotating. This rotation can be seen through the viewing window. If a more precise measurement of flow is required, a chart on the side of the indicator approximates turbine rpm in GPM. d FLMW200 Series SPECIFICATIONS Measuring Accuracy: ±5% FS Repeatability: ±1% FS Flow Measuring Range (FLMW200 Series Flowmeters): 5 to 110 LPM (1 to 30 GPM) Minimum Flow Detection (FLMW210 Series Flow/No Flow Indicator): 0.8 LPM (0.2 GPM) Maximum Operating Pressure: 14 bar (200 psig) Maximum Operating Temperature: 121°C (250°F) Pressure Differential: See graphs on next page B-65 Filtration Requirements: 37 microns (400 U.S. mesh) minimum Materials (Wetted Components): Polysulfone, brass, stainless steel, Buna-N FLMW203/205 11 10 FLMW211 shown larger than actual size. 9 B 8 7 6 5 4 3 2 1 0 4 8 12 16 d 0 ue FLMW202/204/207 8 7 in 6 5 4 2 1 0 2 4 6 10 is FLMW201 8 co 0 4 D 3 2 nt Dimensions: mm (inch) 3 Dimension A B Port Sizes 3 ⁄4 to 1⁄2" Sizes ⁄4 to 1" Sizes 3 45 (1 ⁄4) 45 (13⁄4) 1 89 (3 ⁄2) 137 (53⁄8) FNPT: 1⁄4, 3⁄8, 1⁄2FNPT: 3⁄4, 1 1 1 0 0 1 2 3 4 5 Model No. FLMW201 FLMW202 FLMW203 FLMW204 FLMW205 FLMW206 FLMW207 FLMW208 FLMW209 FLMW211 FLMW212 FLMW213 FLMW206/208 24 22 20 18 16 14 12 10 8 6 4 2 0 0 6 12 18 24 To Order 30 Flow Range 5 to 20 LPM (1 to 5 GPM) 10 to 35 LPM (2 to 10 GPM) 15 to 55 LPM (3 to 15 GPM) 5 to 20 LPM (1 to 5 GPM) 10 to 35 LPM (2 to 10 GPM) 15 to 55 LPM (3 to 15 GPM) 30 to 110 LPM (6 to 30 GPM) 10 to 35 LPM (2 to 10 GPM) 30 to 110 LPM (6 to 30 GPM) Flow/no flow indicator Flow/no flow indicator Flow/no flow indicator Comes with complete operator’s manual. Ordering Examples: FLMW202, 1⁄2" flowmeter, 10 to 35 LPM (2 to 10 GPM). FLMW213, 1" flow/no flow indicator. B-66 NPT 1 ⁄2 1 ⁄2 1 ⁄2 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 1 1 1 ⁄2 3 ⁄4 1