PROGRAMME
ACEMP-OPTIM-ELECTROMOTION 2015
JOINT CONFERENCE
Aegean Conference Electrical Machines and Power Electronics
Optimization of Electrical & Electronic Equipment
International Symposium on Advanced Electromechanical Motion
Systems
SİDE - TURKEY
2-4 September 2015
Technically Sponsored By:
Middle East Technical University
Transilvania University of Brasov
University Politechnica of Timisoara
Technical University of Cluj-Napoca
Organizers:
IEEE
IEEE PES
IES
PELS
IAS
Conference Chair:
● Bulent ERTAN, Middle East Technical Univ., TR
● Marcian CIRSTEA, Anglia Ruskin University, UK
● Mircea RADULESCU, Technical Univ. Cluj-Napoca, RO
Conference Vice-Chair:
● Ion BOLDEA, University Politehnica of Timisoara, RO
Conference Program Chair:
● Carmen GERIGAN, Transilvania University of Brasov, RO
Conference IT-Chair:
● Antonio Luque Estepa, University of Seville, SP
Local Organizing Committee Chair
● Mihai CERNAT, Karabük University, Turkey
Local Organising Committee
● Erhan Akın, Fırat University, Turkey
● Eyüp Akpınar, 9 Sept. Univesity, Turkey
● Timur Aydemir, Gazi University Turkey
● Murat Barut, Niğde University Turkey
● Levent Eren, İzmir Economy University
● Muammer Ermiş, METU, Turkey
● Ozan Keysan, METU, Turkey
● Lale Tükenmez Ergene, İstanbul Technical University, Turkey
Treasurer
● Zeren Değerli, Capadocia Tours
Special Sessions
● Bülent Şarlıoğlu
Transportation Electrification
● Iulia Stamatescu, Sorina Costinașand
Nicoleta Arghira, Ioana Făgărășan,
Sergiu Stelian Iliescu
FhamAutomation, Intelligent Control
and Predictive Maintenance for
Distributed Renewable Energy
System
● Mamadou Baïlo CAMARA, Daniel
FODOREAN
Special Session on Energy
Management Strategies for Hybrid
Electric Vehicle Application
1
INTERNATIONAL STEERING COMMITTEE
● Dushan BOROYEVICH, Virginia Tech, USA
● Amir MIRI, Karlsruhe Institute of Technology, Germany
● Domenico CASADEI, University of Bologna, Italy
● Radu MUNTEANU, Technical University of Cluj-Napoca, Romania
● Radu Vasile CIUPA, Technical University of Cluj-Napoca, Romania
● Sorin MUSUROI, Technical University of Cluj-Napoca, Romania
● Toma DORDEA, Romanian Academy, Romania
● Athanasios SAFACAS, University of Patras, Greece
● Rik DE DONCKER, RWTH Aachen University, Germany
● Bülent ŞARLIOĞLU, Univ. of Wisconsin-Madison USA
● John HUNG, Auburn University, USA
● Dierk SCHRÖDER, Technical University of Munich, Germany
● Marcel JUFER, Swiss Federal Institute of Technology Switzerland
● Jean-Jacques SIMOND, Swiss Federal Institute of Technology, Switzerland
● Robert D. LORENZ, Wisconsin State University, Madison, USA
● Manfred STIEBLER, Technical University of Berlin, Germany
● Thomas LIPO, Wisconsin State University, Madison, USA
● Laszlo SZENTIRMAI, University of Miskolc, Hungary
● Michel POLOUJADOFF, Pierre et Marie Curie University Paris VI, France
● Slawomir WIAK, Technical University of Lodz, Poland.
● Abdelatif MIRAOUI, Cadi Ayyad University of Marrakech, Morocco
● Dan WILAMOWSKI, Auburn University, USA
2
INTRODUCTION
The Aegean Conference on Electrical Machines and Power Electronics (ACEMP) was first
organized in 1992 by the Middle East Technical University and Istanbul Technical
University. The motivation at the time was to take advantage of the bridging position of
Turkey between the Western and Eastern Europe and the new countries emerging to the east
of Turkey, and to provide scientists a medium where they can meet and exchange ideas.
Since then ACEMP became well established in the past 18 years and served its purpose.
Organizing committees of OPTIM and ACEMP conferences, have had discussions after the
OPTIM’14 conference in May in Romania and have decided to make a serious effort to
organize these conferences jointly in the future, thus increasing the quality, participation,
international recognition and reputation of both conferences. On this occasion Electromotion
is also joining this effort.
The first joint event is now taking place with the acronym “ACEMP-OPTIM-Electromotion”
in Side, between 2-4 September 2015. Thank you very much for participating in this meeting.
Once again in the true tradition of ACEMP and OPTIM the conference has a set of invited
papers, covering topics of much interest to the electrical machines and power electronics
community. These papers are presented by worldwide known experts from Europe and
United States. We thank them for participating in this meeting.
Furthermore, the conference is technically co-sponsored by IEEE-IAS, IEEE-IES IEEEPELS and IEEE-PES. Thanks go to IEEE for supporting this meeting and to our friends who
worked hard to make this possible.
I would like to acknowledge also the effort of the referees who generously devoted their time
and reviewed about 200 papers we received.
Wish you all a memorable meeting.
Prof. Dr. H. Bülent Ertan
ACEMP-OPTIM-ELECTROMOTION
Conference Chair
3
PROGRAMME TIMETABLE
2 September 2015 –Wednesday
PLENARY SESSION I
LOCATION: ACEMP HALL
CHAIR: Thomas M. Jahns, H. Bülent Ertan
09:00 –
10:30
FORMAL OPENING
Address of Welcome by the Conference Chairman
KEYNOTE SPEECH
Synchronous Motor Drives - A Forgotten Option
Thomas Lipo, University of Wisconsin-Madison, USA
10:30 - 10:45
10:45 - 12:45
V/f and I/f control of ac Motor Drives: Recent Progress and Perspective
Ion Boldea, Poltehnica of Timisoara, Romania
Coffee Break
ORAL 1A
ORAL 1B
High Power Converter Topologies
and Application (6)
Room: Green I
12:45 - 14:00
ORAL 2A-Special Session II
14:00 – 15:30
Transportation Electrification (6)
Room: Green I
Room: Green II
Lunch
ORAL 2B
Induction Motors Design & Control (5)
Room: Green II
Coffee Break
ORAL 3B-Special Session III
15:30 – 16:00
ORAL 3A
16:00 – 17:45
Brushless DC/Switched Reluctance
Machines (6)
Control and Modeling of Power
Converters (6)
Automation, Intelligent Control and
Predictive Maintenance for Distributed
Renewable Energy Systems (5)
Room: Green I
Room: Green II
4
3 September 2015 –Thursday
PLENARY SESSION II
LOCATION: ACEMP HALL
CHAIR: Thomas A. Lipo, Jawad Faiz
KEYNOTE SPEECH
09:00 – 10:30
New Reluctance machines
Elena Lomonova, Eindhoven University of Technology, Holland
Synchronous Reluctance Technology- The Energy and Cost Efficient
Alternative for Standard Drive Application
Sven Kellner, AG Digital Factory Division Motion Control
10:30 - 10:45
10:45 - 12:45
Synchronous Generators as Distributed Resources in Micro-grids
Tom Jahns, University of Wisconsin-Madison, USA
Coffee Break
ORAL 4A
ORAL 4B
Power Electronics Components (6)
Room: Green I
12:45 - 14:00
14:00 – 16:00
Electric Machine Drivers (6)
Room: Green II
Lunch
POSTER SESSION 1
Power Electronics (12)
Renewable Electric Energy Conversion (7)
Predictive Maintenance and Control of Distributed Renewable Energy
Systems (5)
Room: Lobby
Tea and Coffee Service
ORAL 5B
ORAL 5A
16:00 – 17:45
Low Power Converter Topologies
and applications (7)
Room: Green I
20:00
Design of Electric Machines (6)
Room: Green II
Conference Dinner
5
4 September 2015 –Friday
PLENARY SESSION III
LOCATION: ACEMP HALL
CHAIR: Carmen Gerigan, Jan Vittek
KEYNOTE SPEECH
09:00 – 10:00
10:00-10:30
10:30 - 12:15
Stator Flux Oriented Control for Traction Drives
Volker Staudt, Ruhr University Bochum, Germany
Systematic Evaluation and Improvement of Acoustic Behaviour of
Electric Drive Trains
Kay Hamayer, RTWH Aachen University, Germany
Coffee Break
ORAL 6A
ORAL 6B
Magnets and Materials (4)
Fault Detection & Control (5)
Room: Green I
12:15 - 13:30
POSTER SESSION 2
13:30 – 15:30
Energy Management Strategies for
Hybrid Electric Vehicle (4)
Electric Machines (21)
Room: Lobby
Tea and Coffee Service
ORAL 8A
15:30 – 17:45
Room: Green II
Lunch
ORAL 7B-Special session II
Energy Conversion, Processing
and Storage (7)
Room: Green II
ORAL 8B
Control of Electric Machines (7)
Room: Green II
Closing Ceremony
Room: Green I
6
Oral Session 1A: High Power Converter Topologies and Applications
(TRACK-2 POWER ELECTRONICS)
2 September 2015-Wednesday 10:45-12:45
Chair: Sergey Ryvkin, Timur Aydemir
Room: Green 1
1. Pre-charging of MMC and power-up of a MMC-based multiterminal HVDC
transmission system
Martin Kleine Jäger, Axel Rothstein, Volker Staudt, Andreas Steimel, Daniel Meyer,
Carsten Heising, Ruhr University, Germany
2. A Novel Cascaded Two Transistor H-bridge Multilevel Converter Topology
S. M. Sajjad Rafin, Thomas Lipo, Hanyang University, Korea (South)
3. Performances of the Eight-Switch versus Interleaved Eight-Switch Three-Phase
Buck-type PFC Rectifiers
Codruta Ancuti, Valeriu Olarescu, Ciprian Sorandaru, Sorin Musuroi, Technical
University of Timisoara, Romania
4. Active Lifetime Extension for a 3L-NPC Inverter with Direct Torque Control
The Minh Phan, Huynh Anh Duy Nguyen, Mario Pacas, University of Siegen,
Germany
5. Online Selective Harmonic Minimization for Cascaded Half-Bridge Multilevel
Inverter Using Artificial Neural Network
Payam Farhadi, Mohammad Navidi, Milad Gheydi, Mehdi Pazhoohesh, Hassan
Bevrani, University of Kurdistan, Iran
6. High Performance Parallel Single-Phase Converter Reconfiguration for
Enhanced Availability
Mohammad Hassan Hedayati, Vinod John, Indian Institute of Science (IISc), India
7
Oral Session 1B: Brushless DC/Switched Reluctance Machines
(TRACK-1 ELECTRICAL MACHINES)
2 September 2015-Wednesday 10:45-12:45
Chair: Elena Lomonova, Murat Barut
Room: Green 2
1. Dual Stator/Rotor Brushless DC Motors: A Review of Comprehensive Modelling
Based on Parametric Approach and Coupled Circuit Model
Durmuş Uygun, Selim Solmaz, Yücel Çetinceviz, Gediz University, Turkey
2. Brushless Direct Current Motor Efficiency Characterization
Daniel van Niekerk, Mike Case, Dan Valentin Nicolae, University of Johannesburg,
South Africa
3. Temperature Distribution Analysis of Double Switched Reluctance Machine
Using Finite Element Method
mohammadali abbasian, Hadi Jalali, Islamic Azad University Khomeini shahr Branch,
Iran
4. Electromagnetic and Structural Analysis of a Variable Reluctance Synchronous
Machine
Claudiu Oprea, Claudia Martis, Cristi Irimia, Calin Husar, Mihail Grovu, Technical
University of Cluj-Napoca, Romania
5. Rotor Position Estimation of Switched Reluctance Motors Based on Digital
Amplitude Technique
Majid Asgar, Abolfazl Kamrani, Samin Alipour, Ebrahim Afjei, Shahid Beheshti
University, Iran
6. Evaluation of a 6 pole axial flux PM motor for Control Moment Gyroscope
Application
Reza Zeinali, H. Bülent Ertan, Middle East Technical University, Turkey
8
Oral Session 2A: Transportation Electrification
(Special Session I)
2 September 2015-Wednesday 14:00-15:30
Chair: Bülent Şarlıoğlu, Osama Mohammed
Room: Green 1
1. The Stability Research of High-speed Railway EMUs and Traction
Network Cascade System
Zhigang Liu, Guinan Zhang, Yicheng Liao, Southwest Jiaotong University,
China
2. Design Considerations for Hybrid Energy Storage for Transportation
Systems
Mustafa Farhadi, Osama Mohammed, Florida International University, USA
3. Benchmarking of electric and hybrid vehicle electric machines, power
electronics, and batteries
Bulent Sarlioglu, Casey T. Morris, Di Han, Silong Li, University of WisconsinMadison, USA
4. Novel Dual Rotor Single Stator Axial Flux Switching Permanent Magnet
Machine with Even Harmonic Elimination Topology
Ju Hyung Kim, Yingjie Li, Bulent Sarlioglu, University of Wisconsin-Madison,
USA
5. A Supervisory Controller for a Hybrid Energy Storage System with Two
Propulsion Machines in Electric Vehicles
Huseyin A. Yavaşoglu, Junyi Shen, Chuan Shi, Alireza Khaligh, Istanbul
Technical University, Turkey
6. Smart-For-Two Electric Conversion: The Electric Machine
Lucian Manica, Valerian Croitorescu, UNIVERSITY POLITEHNICA OF
BUCHAREST, Romania
9
Oral Session 2B: Induction Motors Design & Control
(TRACK-1 ELECTRICAL MACHINES)
2 September 2015-Wednesday 14:00-15:30
Chair: Daniel Andreescu, Ahmed Hamida Boudinar
Room: Green 2
1. Parameters Calculation of Single- and Double-Cage Models for Induction
Motors from Manufacturer Data
Luis Guasch-Pesquer, Lamia Youb, Adolfo Andres Jaramillo-Matta, Francisco
Gonzalez-Molina, Jose Antonio Barrado-Rodrigo, Rovira i Virgili University, Spain
2. The Optimization of EKF Algorithm based on Current Errors for SpeedSensorless Control of Induction Motors
Emrah Zerdali, Murat Barut, Nigde University, Turkey
3. Numerical multi-objective optimization of a squirrel cage induction motor for
industrial application
Matteo De Martin, Fabio Luise, Stefano Pieri, Alberto Tessarolo, Carlo Poloni, Nidec
ASI S.p.A, Italy
4. Genetic Algorithm Based Design Optimization of a Three-Phase Induction
Machine with External Rotor
Tamas Gyorgy, Karoly Agoston Biro, Technical University of Cluj-Napoca, Romania
5. Speed-sensorless Direct Vector Control of Induction Motor with the EKF based
stator resistance estimation on FPGA
Remzi Inan, Murat Barut, Nigde University, Turkey
10
Oral Session 3A: Control and Modeling of Power Converters
(TRACK-2 POWER ELECTRONICS)
2 September 2015-Wednesday 16:00-17:45
Chair: Volker Staudt, Levent Eren
Room: Green 1
1. State of Charge Balancing Control of a Multi-Functional Battery Energy Storage
System Based on a 11-Level Cascaded Multilevel PWM Converter
Songcen Wang, Remus Teodorescu, Laszlo Mathe, Erik Schaltz, Paul Dan Burlacu,
Aalborg University, Denmark
2. State Space Control of Quadratic Boost Converter using LQR and LQG
approaches
Bence Kurucso, Alfred Peschka, Peter Stumpf, Istvan Nagy, Istvan Vajk, Budapest
University of Technology and Economics, Hungary
3. µ-Approach Based Robust Voltage Controller Design for a Boost Converter
Used in Photovoltaic Applications
Mehmet Baskın, Bülent Çağlar, ASELSAN Inc., Turkey
4. Control and Modeling of Push-Pull Forward Three-Level Converter for
Microgrid
Zhilei Yao, Jing Xu, Josep M. Guerrero, Yancheng Institute of Technology, china
5. Analysis, Modeling and Simulation of a DC Supply with Load Power Control
Clement Festila, Eva-H Dulf, Roxana Both, Technical University of Cluj-Napoca,
Romania
6. A Generalized Control Approach for Photovoltaic Grid-Tie Micro-inverters
Serkan Öztürk, I.Çadirci, Hacettepe University, Turkey
11
Oral Session 3B: Automation, Remote Monitoring and Diagnosis –
New Paradigms Applied to Distributed Renewable Energy
Systems
(Special Session III: Intelligent Control and Predictive Maintenance for Distributed Renewable
Energy Systems)
2 September 2015-Wednesday 16:00-17:45
Chair: Sorina Costinas, Iulia Stamatescu
Room: Green 2
1. A Novel Hybrid Approach to Improve the Accuracy of Load Forecasting by
IOWA
Pooria Lajevardy, Fereshteh-Azadi Parand, Hossein Rahimi, Allameh Tabatabai
University, Iran
2. Model Predictive Control Applied for Building Thermal Control
Giorgian Neculoiu, Valentin Dache, Grigore Stamatescu, Valentin Sgarciu,
Politehnica University of Bucharest, Romania
3. Temperature Control of a Greenhouse Heated by Renewable Energy Sources
Ramona-Oana Grigoriu, Alina Voda, Arghira Nicoleta, Vasile Calofir, Sergiu-Stelian
Iliescu, Politeh JANnica University of Bucharest, Romania
4. Development of New Protection Solutions for the Renewable Energy Power
Plants
Valentin Vilcu, Transelectrica National Dispatcher, Romania
5. Analysis of Fly-Back PV Microinverter and Optimizing Control System Using
Finite Gradient Descent Method
Mahshid Khoshlessan, Behzad Asaei, Babak Farhangi, University of Tehran, Iran
12
Oral Session 4A: Power Electronics Components
(TRACK-2 POWER ELECTRONICS)
3 September 2015-Thursday
10:45-12:45
Chair: Mihaela Popescu, Zhilei Yao
Room: Green 1
1. A Review of the Condition Monitoring of Capacitors in Power Electronic
Converters
Hammam Soliman, Huai Wang, Frede Blaabjerg, Aalborg University, Denmark
2. Analysis of the properties of damped LCL filters including measurement-based
assessment
Axel Rothstein, Volker Staudt, Volker Trapp, Hans Peter Kratz, Ruhr University,
Germany
3. Ground Leakage Current Reduction in Single-Phase Grid-Connected Power
Converter
Mohammad Hassan Hedayati, Vinod John, Indian Institute of Science (IISc), India
4. A Survey on the Reliability of Power Electronics in Electro-Mobility
Applications
Brwene Gadalla, Erik Schaltz, Frede Blaabjerg, Aalborg University, Denmark
5. Characterisation of 10 kV 10 A SiC MOSFET
Emanuel-Petre Eni, Bogdan Ioan Incau, Tamas Kerekes, Remus Teodorescu, Stig
Munk-Nielsen, Aalborg University, Denmark
6. Comparing Different Switching Techniques For Silicon Carbide MOSFET
Assisted Silicon IGBT Based Hybrid Switch
Sadık Özdemir, Fatih Acar, Uğur Savaş Selamoğulları, Yildiz Technical University,
Turkey
13
Oral Session 4B: Electric Machine Drives
(TRACK-1 ELECTRICAL MACHINES)
3 September 2015-Thursday
10:45-12:45
Chair: Thomas Herold, Brian P. Ruddy
Room: Green 2
1. Drivetrain Integrated Dc-Dc Converter utilizing the Zero Sequence Current of
the Starter-Generator in 48V Network Vehicles
Murat Senol, Rik W. De Doncker, ISEA, RWTH-Aachen, Germany
2. Overall performances of a high-speed propulsion system through simulation
approach
Cristi Irimia, Mihail Grovu, Calin Husar, Daniel Fodorean, Technical University of
Cluj-Napoca, Romania
3. Design of a Controller for a Limited Angle Torque Motor and Its dsPIC
Implementation
İlhami Çolak, Murat Şahin, Semih Çakıroğlu, Zafer Esen, Gelişım Univesity, Turkey
4. Considering Half Bridge Converters for Switched Reluctance Motor Drive
Applications
Petre Doru Teodosescu, Adrian-Cornel Pop, Tiberiu Rusu, Claudia Steluta Martis,
Ioana Vintiloiu, Technical University of Cluj-Napoca, Romania
5. Fixed-Frequency Sliding Mode Control for Power Quality Improvement of a
Grid-Connected Inverter
Pradeep Kumar Sahu, Priyabrata Shaw, Somnath Maity, NIT ROURKELA, India
6. Auto-tuning Fractional Order Velocity Control of a DC Motor
Eva-H. Dulf, Cristina-I. Muresan, Roxana Both, Csaba Fustos, Technical University
of Cluj-Napoca, Romania
14
POSTER SESSION I
POSTER Session I-1: Power Electronics components
(TRACK-2 Power Electronics and Power Conversion)
3 September 2015-Thursday
14:00-16:00
Chair: Sergey Ryvkin, Octavian Cornea, Lale Tükenmez Ergene, Sven Kellner
Room: Lobby
1. Analysis And Comparison Of Passive Damping Methods For Shunt Active
Power Filter With Output LCl Filter
Mehmet Büyük, Adnan Tan, Kamil Ç. Bayındır, Mehmet Tümay, Çukurova
University, Turkey
2. Indirect Current Control in Active DC Railway Traction Substations
Mihaela Popescu, Alexandru Bitoleanu, Vlad Suru, University of Craiova, Romania
3. The Linear and Nonlinear Behavior Analysis for RC-Filters
Eva-H Dulf, Clement Festila, Roxana Both, Technical University of Cluj-Napoca,
Romania
4. Analysis of Operation of Power Components Compensation Systems at
Harmonic Distortions of Mains Supply Voltage
Mykhaylo Zagirnyak, Mariia Maliakova, Andrii Kalinov, Kremenchuk Mykhailo
Ostrohradskyi National University, Ukraine
15
POSTER Session I-2: Power Converter Topologies and Applications
(TRACK-2 Power Electronics and Power Conversion)
3 September 2015-Thursday
14:00-16:00
Chair: Sergey Ryvkin, Octavian Cornea, Lale Tükenmez Ergene, Sven Kellner
Room: Lobby
1. Five-Level Converter with Selective Harmonic Elimination for STATCOM
Abdül Balıkçı, Eyüp Akpınar, Dokuz Eylul University, Turkey
2. High Efficiency Single-Stage and Two-Stage Six-Switch Three-Phase PFC
Buck-Type Rectifiers
Mihaela-Codruta Ancuti, Valeriu Olarescu, Ciprian Sorandaru, Sorin Musuroi
3. A New Soft Switched ZCZVT PWM DC-DC Boost Converter
Yakup Şahin, Naim Süleyman Ting, İsmail Aksoy, Yildiz Technical University, Turkey
4. Design of High Frequency Buck Converter for DC Motor Control
Lale T. Ergene, Abdullah Polat, Liridon Xheladini, Istanbul Technical University
5. The Linear and Nonlinear Behavior Analysis for RC-Filters
Eva-H Dulf, Clement Festila, Roxana Both, Technical University of Cluj-Napoca,
Romania
6. Stabilization of Parallel DC/DC Buck Converters Controlled over Shared
Network
Ashraf Khalil, Jihong Wang, University of Benghazi, Libya
7. THD Improvement of a Bidirectional Flyback Inverter by Sliding-Mode Control
Octavian Cornea, Gheorghe-Daniel Andreescu, Catalin-Cornel Patrascu, Nicolae
Muntean, Politehnica University Timisoara, Romania
8. PWM Strategy for Improved Natural Balancing of a 4-Level H-Bridge Flying
Capacitor Converter
Anar Ibrayeva, Viktor Ten, Yakov Familiant, Alexander Ruderman, Nazarbayev
University, Kazakhstan
16
POSTER Session I-3: Renewable Electric Energy Conversion,
Processing and Storage
(TRACK-3)
3 September 2015-Thursday
14:00-16:00
Chair: Corneliu Marinescu, Tom M. Jahns
Room: Lobby
1. A New Model for Output Power Calculation of Variable-Speed Wind Turbine
Systems
Ulaş Eminoğlu, Nigde University, Turkey
2. Effect of Increasing Energy Demand on the Corrosion Rate of Buried Pipelines
in the Vicinity of High Voltage Overhead Transmission Lines
Kazeem Adedeji, Akinnlolu Ponnle, Bolanle Abe, Adisa Jimoh, Tshwane University of
Technology, South Africa
3. Loss minimum reconfiguration through Deterministic Iterative Improvement
and Simulated Annealing
Valentin Boicea, Radu Porumb, Tudor Leonida, University Politehnica of Bucharest,
Romania
4. Energy-Saving Sliding Mode Control for Synchronous Drive Fed by Renewable
Energy Source
Sergey Ryvkin, Miroslav Chomat, Trapeznikov Institute of Control Sciences RAS,
Russian Federation
5. Induction Motors Best Efficient Operation Points in Pumped Storage Systems
Andreea Busca-Forcos, Corneliu Marinescu, Cristian Busca, Ioan Serban, Remus
Teodorescu, Transilvania University of Brasov, Romania
6. Hybrid analytical and numerical method of calculation the single-diode model
parameters
Abderrahim Taouni, Ahmed Abbou, Mohammed Akherraz, Abderrahmane Ouchatti,
Khalid Majdoub, Morocco
7. Simulated, Hands-on and Remote Laboratories for Studding the Solar Cells
Petru A. Cotfas, Daniel T. Cotfas, Carmen Gerigan, Transilvania University of
Brasov, Romania
17
POSTER Session I-4: Predictive Maintenance and Control of
Distributed Renewable Energy Systems
(Special Session-3)
3 September 2015-Thursday
14:00-16:00
Chair: Sergiu Stelian Iliescu, Nicoleta Arghira
Room: Lobby
1. Voltage – Reactive Power Control In Renewables Power Plant. Technical
requirements applied in Romanian Grid
Elena Daniela Dinu, Doina Ilisiu, National Dispatch Center CNTEE Transelectrica
S.A., Romania
2. Yield and availability analysis of grid-connected photovoltaic systems – a case
study for Iasi region, Romania
Ciprian Nemes, Sorina Costinas, Technical University of Iasi, Romania
3. Multi-Criteria Approach for Maintenance Management in HV Substations
Sorina Costinas, Cristina Sorana Ionescu, Ioana Opris, Daniela Nistoran, Gabriela
Nicoleta Sava, University Politehnica of Bucharest, Romania
4. Predictive Control for Photovoltaic Tracking Optimization
Iulia Stamatescu, Grigore Stamatescu, Vasile Calofir, Ioana Fagarasan, Sergiu
Stelian Iliescu, University Politehnica of Bucharest, Romania
5. Performance Evaluation of Anti-Islanding Protection Technique for Micro Grids
T Kandil, Al-Jouf University, Saudi Arabia
18
Oral Session 5A: Low Power Converter Topologies and Applications
(TRACK-2 POWER ELECTRONICS)
3 September 2015-Thursday
16:00-17:45
Chair: Thomas A. Lipo, Thomas Herold
Room: Green 1
1. Forced Commutation Quasi-Resonant Converter in Offshore-Onshore
Applications
Horia Balan, Mircea Ioan Buzdugan, Adrian Augustin Pop, Radu Adrian Munteanu,
Traian Varodi, Technical University of Cluj-Napoca, Romania
2. Modification on a simple soft switched boost converter
Mohammad Mardaneh, Zhale Hashemi, Shiraz University, Iran
3. Valley Current Mode Control of a Bi-Directional Hybrid DC-DC Converter
Dan Hulea, Nicolae Muntean, Octavian Cornea, Politehnica University Timisoara,
Romania
4. Design characteristics of SAB and DAB converters
Christian Fontana, Mattia Forato, Manuele Bertoluzzo, Giuseppe Buja, University of
Padova, Italy
5. A New ZCT-ZVT PWM Interleaved DC-DC Boost Converter
Naim Süleyman Ting, Yakup Şahin, İsmail Aksoy, Yildiz Technical University, Turkey
6. A New Zero-Voltage-Transition PWM DC-DC Boost Converter
Naim Süleyman Ting, İsmail Aksoy, Yakup Şahin, Yildiz Technical University, Turkey
7. Comparison of Zero Voltage Switching Phase-Shifted PWM Full Bridge DC-DC
Converter Topologies
Huseyin Aksoy, M. Timur Aydemir, Gazi University, Turkey
19
Oral Session 5B: Design of Electric Machines
(TRACK-1 ELECTRICAL MACHINES)
3 September 2015-Thursday
16:00-17:45
Chair: Mircea Radulescu, Mohammadali Abbasian
Room: Green 2
1. Optimization of Linear Permanent Magnet Synchronous Motors for Needle-free
Jet Injection
Bryan P. Ruddy, Jake Boyce-Bacon, Andrew J. Taberner, The University of
Auckland, New Zealand
2. Optimization in Design of Electric Machines: Methodology and Workflow
Stjepan Stipetic, Werner Miebach, Damir Zarko, Marie Curie PostDoc Fellow, France
3. Predicting Radial and Tangential No-Load Air-Gap Flux Density in IPMSM
Using a Novel Conformal Mapping and Lumped Parameter Model
Hooshang Mirahki, Mehdi Moallem, Isfahan University of Technology, Iran
4. Evaluating Hybrid Optimization Algorithms for Design of a Permanent Magnet
Generator
Erlend L. Engevik, Astrid Roekke, Robert Nilssen, Norwegian University of Science
and Technology, Norway
5. A New Control Technique for Improving Dynamic Performance of MonoInverter Dual Parallel Induction Motors in Railway Traction Systems
Dogan Yildirim, Bulent Caglar, ASELSAN Inc., Turkey
6. Design Optimization of Flux Barrier Synchronous Reluctance Machines
Thushanth Mohanarajah, Mahmood H. Nagrial, Jamal H. Rizk, Ali Hellany, University
of Western Sydney, Australia
20
Oral Session 6A: Magnets and Materials. Applications in energy
conversion devices
(TRACK-4)
4 September 2015-Friday
10:30-12:15
Chair: Durmus Uygun, Calin Ciufudean
Room: Green 1
1. Improved Analytical Method for Hysteresis Modelling of Soft Magnetic
Materials
Septimiu Motoasca, Gheorghe Scutaru, Carmen Gerigan, Transilvania Universiti of
Brasov, IEFA, Romania
2. LTCC/PZT Technology for Automotive Actuator and Sensor Applications
Romeo Ciobanu, Cristina Schreiner, T.U. Iasi, Romania
3. Electric potential assessment near distribution power lines caused by lightning
surge wave propagation
Elena Larisa Mariut, Elena Helerea, Corneliu Ursachi, Transilvania University of
Brasov, Romania
4. Zero Power Control of a 3 DOF Levitated Multiple Hybrid Electromagnet
Flexible Conveyor System
Ahmet Fevzi Bozkurt, Kadir Erkan, Ömer Faruk Güney, Yildiz Technical University,
Turkey
21
Oral Session 6B: Fault Detection & Control
(TRACK-1 ELECTRICAL MACHINES)
4 September 2015-Friday
10:30-12:15
Chair: Lucian Nicolae Tutelea, Azeddine Bendiabdellah
Room: Green 2
1. Short-circuit Fault Diagnosis in Permanent Magnet Synchronous Motors- An
Overview
Jawad Faiz, S.A.H Exiri, University of Tehran, Iran
2. Impact of Rotor Inter-turn Short Circuit Fault upon Performance of a Wound
Rotor Induction Motor
Jawad Faiz, Mehran Keravand, Mahmod Ghasemi-Bijan, University of Tehran, Iran
3. Two Approaches Comparison to Energy Optimal Position Control with
Constant and Linear Torques
Jan Vittek, Branislav Ftorek, Peter Butko, Milan Pospisil, Zilina University, Slovak
Republic
4. Wide Band Modeling of an Air-core Reactor for Fast Transient Studies
Barend van Jarsveld, Dan Valentin Nicolae, , University of Johannesburg, South
Africa
5. Fault Tolerant Control of PMSM Drive Using Sliding Mode Strategy
Hemza Mekki, Djamel Boukhetala, Mohamed Tadjine, Omar Benzineb, Larbi ChrifiAlaoui, LCP, Ecole Nationale Polytechnique, Algeria
22
POSTER SESSION II
4 September 2015-Friday
13:30 – 15:30
Chair: Mahmood Nagrial, Stjepan Stipetic, Eva Dulf, Lamia Youb
Room: Lobby
POSTER Session II-1: Induction Motors Design & Control
(TRACK-1 ELECTRICAL MACHINES)
1. Torque Peak Reduction and Overload Monitoring of Induction Motors in
Offshore Drilling Operations
Witold Pawlus, Michael R. Hansen, Geir Hovland, Martin Choux, University of Agder,
Norway
2. A Comparative Analysis of FLC and ANFIS Controller for Vector Controlled
Induction Motor Drive
Erdal Kılıç, Hasan Rıza Özçalık, Şaban Yılmaz, Sami Sit, Kahramanmaras Sutcu
Imam University, Turkey
3. Induction motor bearing fault analysis using Root-MUSIC method
Ahmed Hamida Boudinar, Noureddine Benouzza, Azeddine Bendiabdellah,
Mohammed El-amine Khodja, University of Sciences and Technology of Oran,
Algeria
23
POSTER Session II-2: Control of Electric Machines
(TRACK-1 ELECTRICAL MACHINES)
1. Sensorless Vector Controlled Synchronous Reluctance Motor Fed by Matrix
Converter
Arzhang Yousefitalouki, Gianmario Pellegrino, Politecnico di Torino, Italy
2. Comparison of SVPWM, SPWM and HCC Control Techniques in Power Control
of PMSG used in Wind Turbine Systems
Naim Süleyman Ting, Yusuf Yasa, İsmail Aksoy, Yakup Şahin, Yildiz Technical
University, Turkey
3. Comparison of PI and Neural Fuzzy Based Closed Loop Control Methods for
Permanent Magnet Synchronous Motor Fed by Matrix Converter
Yurdagül Bentesen Yakut, Sedat Sunter, Mehmet Özdemir, Dicle University, Turkey
4. Three phase Inverter Speed Control of AC Drives Motors using DSPic
microcontroller
Hadj Dida Abdelkader, Bourahla Mohamed, H. Bulent Ertan*, Mostapha Benghanem,
University Of Sciences And Technology Of Oran Algeria Usto-Mb, Algeria, *Middle
East Technical University, Turkey
24
POSTER Session II-3: Design of Electric Machines
(TRACK-1 ELECTRICAL MACHINES)
1. Calculation of No-Load Saturation Curve for Wound Field Synchronous
Machines Based on Magnetic Equivalent Circuits and Conformal Mapping
Ana Hanic, Zlatko Hanic, Mario Vrazic, Damir Zarko, University of Zagreb, Croatia
2. Fast and Very Fast Electromagnetic Transients of Three-phase Three Legged
Transformers: Theoretical Approach and Experiments
Faouzi Aboura, Sarah Asma Touhami, Ahmed Islam Zama, Redouane Tahmi, Omar
Touhami, Ecole Nationale Polytechnique, Algeria
3. Dynamical Modeling and Analysis of Asymmetric Unbalanced Three-Phase
Three Legged Transformers
Faouzi Aboura, Sarah Asma Touhami, Ahmed Islam Zama, Redouane Tahmi, Omar
Touhami, Ecole Nationale Polytechnique, Algeria
4. Current waveform optimization for ripple-free output torque of transverse flux
reluctance machines
Jacek Borecki, Matthias Joost, Holger Groke, Bernd Orlik, IALB - University of
Bremen, Germany
5. Analytical Design of a PMSMs by Using Magnets Bars With Different
Remanence
Brahim Ladghem Chikouche, Kamel Boughrara, Rachid Ibtiouen, univrsité md
boudiaf, Algeria
25
POSTER Session II-4: Brushless DC/Switched Reluctance Machines
(TRACK-1 ELECTRICAL MACHINES)
1. Efficiency and Losses Analysis in Switched Reluctance Motors for Electric
Vehicles
Pavol Rafajdus, Adrian Peniak, Milan Diko, Juraj Makarovic, Peter Bubravka, Valeria
Hrabovcova, University of Zilina, Slovak Republic
2. Performance Comparison Between Brushless PM and Induction Motors for
Hybrid Electric Vehicle Applications
Shahriar Sharifan, Seyyedmilad Ebrahimi, Hashem Oraee, Sharif University of
Technology, Iran
3. Single-Phase Stator-Ferrite PM Double Saliency Motor Performance and
Optimization
Flavio Kalluf, Aline Juliani, Aleandro Espindola, Ion Boldea, Lucian Tutelea, AndySorin Isfanuti, Arthur Laureano, Marco Gianesini, Roberto Kinceler, Embraco, Brazil
4. The Influence of the Pole Asymmetry on the BLDC Motors
Lale Ergene, Ceren Özkan, Abdullah Polat, Istanbul Technical University, Turkey
26
POSTER Session II-5: Fault Detection & Control
(TRACK-1 ELECTRICAL MACHINES)
1. Slot harmonic frequency detection as a technique to improve stator current
spectrum approach for broken rotor bars fault diagnosis
Noureddine Benouzza, Ahmed Hamida Boudinar, Azeddine Bendiabdellah,
Mohammed El-amine Khodja, University of Sciences and Technology of Oran,
Algeria
2. Fault Detection in Synchronous Motor Drives, a Co-Simulation Approach
Constantin Apostoaia, Mihai Cernat, Purdue University Calumet, USA
3. A New Support Vector Machine based Eccentricity Fault Diagnosis for InverterFed Induction Motors
İlhan Aydin, Mehmet Karaköse, Erhan Akın, Alişan Sarımaden, Firat University,
Turkey
4. The enhancements of broken bar fault detection in induction motors
Azeddine Bendiabdellah, Ahmed Hamida Boudinar, Noureddine Benouzza,
Mohammed El-amine Khodja, University of Sciences and Technology of Oran,
Algeria
5. Lighting impulse voltage distribution vs. transformer insulation design
Boruz Mircea Alexandru, Mircea Paul Mihai, Mihai Catalin, University of Craiova,
Romania
27
Oral Session 7B: Energy Management Strategies for Hybrid Electric
Vehicle Application
(Special Session II)
4 September 2015-Friday
13:30-15:30
Chair: Daniel Fodorean, Camara Mamadou Bailo
Room: Green 2
1. Energy Management for Hybrid Electric Vehicles using load's power fluctuating
compensation-Ultracapacitors and Lithium-battery
Mamadou Baïlo Camara, Brayima Dakyo, University of Le Havre, France
2. A Novel Hybrid Intelligent Method for Static Var Compensator Placement in
Distribution Network with Plug-In Hybrid Electrical Vehicles Parking
Saeed Rezaeian Marjani, Mahzad Gheibi, Vahid Talavat, Morteza Farsadi, Urmia
University, Iran
3. Hybrid Electric Boat based on Variable Speed Diesel Generator and Lithiumbattery - Using Frequency Approach for Energy Management
K. Bellache, M.B. Camara, B. Dakyo, University of Le Havre, France
4. Electrical Vehicle charging strategy by PV distributed system
Zeinabou Nouhou Bako, Mahamadou Abdou Tankari, Massinissa Ait Salah, Gilles
Lefebvre, Seidou Maiga Amadou
28
Oral Session 8A: Renewable Electric Energy Conversion, Processing
and Storage
(TRACK-3)
4 September 2015-Friday
15:30-17:45
Chair: Carmen Gerigan, Lale Tükenmez Ergene
Room: Green 1
1. Irregular Wave Energy Extraction Analysis for A Slider Crank WEC Power Takeoff System
Yuanrui Sang, Bora Karayaka, Yanjun Yan, James Zhang, Eduard Muljadi, Western
Carolina University, USA
2. Partial Shading Effect on Solar PV Array
Abdellah Miloudi, Yahia Miloudi, Mohamed Mostefai, University Dr Tahar Moulay,
Algeria
3. Spatial Magnetic Field Polarization below Balanced Double-Circuit Linear
Configured Power Lines for Six Phase Arrangements
Akinlolu Ponnle, Bolanle Abe, Adisa Jimoh, Tshwane University of Technology,
South Africa
4. Ageing of Photovoltaic Cells Under Concentrated Light
Daniel Tudor Cotfas, Petru Adrian Cotfas, Dan Floroian, Laura Floroian, Mihai
Cernat, Transilvania University of Braso, Romania
5. Energy Efficiency Rating of Transformers under Harmonic Balanced Regime
Radu Porumb, Cornel Toader, Nicolae Golovanov, Tudor Leonida, George Seritan,
Technical University of Bucuresti, Romania
6. Comparative Design Analysis of Ferrite-Permanent-Magnet Micro-Wind Turbine
Generators
Mihai Chirca, Stefan Breban, Claudiu Oprea, Mircea M. Radulescu, Technical
University of Cluj-Napoca, Romania
7. Thermoelectric Generator Emulator for MPPT Testing
Elena Anamaria Man, Dezso Sera, Laszlo Mathe, Erik Schaltz, Lasse Rosendahl,
Aalborg University, Denmark
29
Oral Session 8B: Control of Electric Machines
(TRACK-1 ELECTRICAL MACHINES)
4 September 2015-Friday
13:30 – 15:30
Chair: Dan NICOLAE, Noureddine Benouzza
Room: Green 2
1. FPGA Implementation of a Predictive Control for a PMSM with Variable
Switching Frequency
Fernando D. Ramirez-Figueroa, Mario Pacas, University of Siegen, Germany
2. Controlled capacitor 1 phase a.c. PM generator FEM characterization and
circuit model based performance
Ion Boldea, Lucian Nicolae Tutelea, Nicolae Muntean, Ana Adela Popa, UPT,
Romania
3. Self-Commissioning of Electrical Parameters for PMSM in Sensorless Drives
Cristian Lascu, Gheorghe-Daniel Andreescu, University Politehnica Timisoara,
Romania
4. Flux Control Range Broadening of a DESM by Geometry Optimization
Trung-Kien Hoang, Lionel Vido, Frederic Gillon, Mohamed Gabsi, SATIE, ENS
Cachan, France
5. Horizontal I-PD Position Control Of a Levitated Hybrid Electromagnet Driven By
3 Phase Ac Long Stator L-PMSM
Mirsad Bucak, Murat Atlıhan, Kadir Erkan, YildizTechnical University, Turkey
6. A Robust Design for LPMSM with Minimum Motor Current THD Based on
Improved Space Vector Modulation Technique
Jawad Faiz, Mehdi Manoochehri, Ghazanfar Shahgholian, University of Tehran, Iran
7. Mechanisms of driver integrated blanking time compensation
Axel Rothstein, Volker Staudt, Ruhr-University Bochum, Germany
30
BOICEA, V.
BOLDEA, I.
BORECKI, J.
BOTH, R.
BOUDINAR, A. H.
BOUGHRARA, K.
BOUKHETALA, D.
BOYCE-BACON, J.
BOZKURT, A. F.
BUBRAVKA, P.
BUCAK, M.
BUJA, G.
BUSCA, C.
BUSCA-FORCOS, A.
BUTKO, P.
BUYUK, M.
BUZDUGAN, M. I.
CADIRCI, I.
CAGLAR, B.
CAKIROGLU, S.
CALOFIR, V.
CAMARA, M. B.
CASE, M.
CATALIN, M.
CERNAT, M.
CETINCEVIZ, Y.
CHIRCA, M.
CHOMAT, M.
CHOUX, M.
CHRIFI-ALAOUI, L.
CIOBANU, R.
COLAK, I.
CORNEA, O.
COSTINAS, S.
COTFAS, D. T.
COTFAS, P. A.
CROITORESCU, V.
DACHE, V.
DAKYO, B.
DAN BURLACU, P.
DE DONCKER, R. W.
DE MARTIN, M.
DIKO, M.
DINU, E. D.
DULF, E. H.
DULF, F. V.
AUTHOR INDEX
ABBASIAN, M. A.
ABBOU, A.
ABDELKADER, H. D.
ABE, B.
ABOURA, F.
ACAR, F.
ADEDEJI, K.
AFJEI, E.
AHMAD, F.
AKHERRAZ, M.
AKIN, E.
AKPINAR, E.
AKSOY, H.
AKSOY, I.
ALIPOUR, S.
AMADOU, S. M.
ANCUTI, C.
ANCUTI, M. C.
ANDREESCU, G. D.
APOSTOAIA, C.
ASAEI, B.
ASGAR, M.
ATLIHAN, M.
AYDEMIR, M.T
AYDIN, I.
BAKO, M. A.
BALAN, H.
BALIKCI, A.
BARRADO-RODRIGO, J. A.
BARUT, M.
BASKIN, M.
BAYINDIR, K. C.
BELLACHE, K.
BENDIABDELLAH, A.
BENGHANEM, M.
BENOUZZA, N.
BENTESEN YAKUT, Y.
BENZINEB, O.
BERTOLUZZO, M.
BEVRANI, H.
BIRO, K. A.
BITOLEANU, A.
BLAABJERG, F.
8
17
14
17, 29
25
13
17
8
16
17
27
16
19
15, 16, 24
8
28
19
16
16, 30
27
12
8
30
19
27
28
15
16
10
10
11
7
28
23, 27
14
23, 27
24
22
15
19
10
7
13
31
17
26, 30
25
11, 7, 16, 24
23, 27
25
22
20
21
26
30
15
17
17
22
7
15
11
11, 20
14
12, 18
28
8
27
27, 29
8
29
17
23
27
21
14
15, 16
18
17, 29
17, 29
9
12
28
11
14
10
26
18
11, 7, 16, 24
24
EBRAHIMI, S.
EMINOGLU, U.
ENGEVIK, E. L.
ENI, E. P.
ERGENE, L.
ERKAN, K.
ERTAN, H. B.
ESEN, Z.
EXIRI, S.A.H
FAGARASAN, I.
FAIZ, J.
FAMILIANT, Y.
FARHADI, M.
FARHADI, P.
FARHANGI, B.
FARSADI, M.
FESTILA, C.
FLOROIAN, D.
FLOROIAN, L.
FODOREAN, D.
FONTANA, C.
FORATO, M.
FTOREK, B.
FUSTOS, C.
GABSI, M.
GADALLA, B.
GERIGAN, C.
GHASEMI-BIJAN, M.
GHEIBI, M.
GHEYDI, M.
GILLON, F.
GOLOVANOV, N.
GONZÁLEZ-MOLINA, F.
GRIGORIU, R. O.
GROKE, H.
GROVU, M.
GUASCH-PESQUER, L.
GUERRERO, J. M.
GUNEY, O. F.
GYORGY, T.
HAN, D.
HANIC, A.
HANIC, Z.
HANSEN, M. R.
HASHEMI, Z.
HEDAYATI, M. H.
26
17
20
13
26
21, 30
8, 14
14
22
18
22, 30
16
9
19
12
28
11, 7, 16
29
29
14
15
15
22
24
30
13
17, 21
22
28
19
30
29
10
12
25
8, 14
10
11
21
10
9
25
25
23
15
13, 19
HEISING, C.
HELEREA, E.
HELLANY, A.
HOANG, T. K.
HOVLAND, G.
HRABOVCOVA, V.
HULEA, D.
HUSAR, C.
IBRAYEVA, A.
IBTIOUEN, R.
ILIESCU, S. S.
ILISIU, D.
INAN, R.
INCAU, B. I.
IONESCU, C. S.
IRIMIA, C.
ISFANUTI, A. S.
JALALI, H.
JARAMILLO-MATTA, A. A.
JIMOH, A.
JOHN, V.
JOOST, M.
JULIANI, A.
KALINOV, A.
KALLUF, F.
KAMRANI, A.
KANDIL, T.
KARAISAS, P.
KARAKOSE, M.
KARAYAKA, B.
KERAVAND, M.
KEREKES, T.
KHALIGH, A.
KHALIL, A.
KHODJA, M. E.
KHOSHLESSAN, M.
KILIC, E.
KIM, J. H.
KLEINE JÄGER, M.
KRATZ, H. P.
KURUCSO, B.
LADGHEM CHIKOUCHE, B.
LAJEVARDY, P.
LASCU, C.
LAUREANO, A.
LEFEBVE, G.
32
19
21
20
30
23
26
15
8, 13
16
25
12, 18
18
10
13
18
8, 14
26
8
10
17, 29
13, 19
25
26
7
26
8
18
15
27
29
22
13
9
16
23, 27
12
23
9
19
13
11
20
12
30
26
28
LEONIDA, T.
LI, S.
LI, Y.
LIAO, Y.
LIPO, T.
LIU, Z.
LUISE, F.
MAITY, S.
MAJDOUB, K.
MAKAROVIC, J.
MALIAKOVA, M.
MAN, E. A.
MANICA, L.
MANOOCHEHRI, M.
MARDANEH, M.
MARINESCU, C.
MARIUT, E. L.
MARTIS, C. S.
MATHE, L.
MEKKI, H.
MEYER, D.
MIEBACH, W.
MILOUDI, A.
MILOUDI, Y.
MIRAHKI, H.
MIRCEA ALEXANDRU, B.
MOALLEM, M.
MOHAMED, B.
MOHAMMED ESSEDIK, B.
MOHAMMED, OS.
MOHANARAJAH, T.
MORRIS, C. T.
MOSTEFAI, M.
MOTOASCA, S.
MULJADI, E.
MUNK-NIELSEN, S.
MUNTEAN, N.
MUNTEANU, R. A.
MURESAN, C. I.
MUSUROI, S.
NAGRIAL, M. H.
NAGY, I.
NAVIDI, M.
NECULOIU, G.
NEMES, C.
NGUYEN, H. A. D.
17, 29
9
9
9
19
9
10
14
17
26
7
29
9
30
15
17
21
8, 14
11, 29
22
19
20
29
29
20
27
20
14
14
9
20
9
29
21
29
13
15, 16, 30
15
24
16, 19
20
11
19
12
18
19
NICOLAE, D. V.
NICOLETA, A.
NILSSEN, R.
NISTORAN, D.
OLARESCU, V.
OPREA, C.
OPRIS, I.
ORAEE, A.
ORAEE, H.
ORLIK, B.
OUCHATTI, A.
OZCALIK, H. R.
OZDEMIR, M.
OZDEMIR, S.
OZKAN, C.
OZTURK, S.
PACAS, M.
PARAND, F. A.
PATRASCU, C. C.
PAUL MIHAI, M.
PAWLUS, W.
PAZHOOHESH, M.
PELLEGRINO, G.
PENIAK, A.
PESCHKA, A.
PHAN, T. M.
PIERI, S.
POLAT, A.
POLONI, C.
PONNLE, A.
POP, A. A.
POP, A. C.
POPA, A. A.
POPESCU, M.
PORUMB, R.
POSPISIL, M.
RAFAJDUS, P.
RAFIN, S. M. S.
RAHIMI, H.
RAMIREZ-FIGUEROA, F. D.
RASOOL, A.
REZAEIAN MARJANI, S.
RIZK, J. H.
ROEKKE, A.
ROSENDAHL, L.
ROTHSTEIN, A.
33
8, 22
12
20
18
16, 19
8
18
26
26
25
17
23
24
13
26
11
19, 30
12
16
27
23
19
24
26
11
19
10
16, 26
10
17, 29
15
14
30
7
17, 29
22
26
19
12
30
16
28
20
20
29
13, 19, 30
RUDDY, B. P.
RUDERMAN, A.
RUSU, T.
RYVKIN, S.
SABANOVIC, A.
SAHIN, M.
SAHIN, Y.
SAHU, P. K.
SALAH, M. A.
SANG, Y.
SARIMADEN, A.
SARLIOGLU, B.
SAVA, G. N.
SCHALTZ, E.
SCHREINER, C.
SCUTARU, G.
SELAMOGULLARI, U. S.
SENOL, M.
SERA, D.
SERBAN, I.
SERITAN, G.
SGARCIU, V.
SHAHGHOLIAN, G.
SHAIKH, S. I.
SHARIFAN, S.
SHAW, P.
SHEN, J.
SHI, C.
SIT, S.
SOLIMAN, H.
SOLMAZ, S.
SORANDARU, C.
STAMATESCU, G.
STAMATESCU, I.
STAUDT, V.
STEIMEL, A.
STIPETIC, S.
STUMPF, P.
SUNTER, S.
SURU, V.
T. ERGENE, L.
TABERNER, A. J.
TADJINE, M.
TAHMI, R.
TALAVAT, V.
TAN, A.
20
16
14
17
16
14
15, 16, 24
14
28
29
27
9
18
11, 13, 29
21
21
13
14
29
17
29
12
30
16
26
14
9
9
23
13
8
16, 19
12, 18
18
13, 19, 30
19
20
11
24
7
16
20
22
25
28
7
TANKARI, M. A.
TAOUNI, A.
TEN, V.
TEODORESCU, R.
TEODOSESCU, P. D.
TESSAROLO, A.
TING, N. S.
TOADER, C.
TOUHAMI, O.
TOUHAMI, S. A.
TRAPP, V.
TUMAY, M.
TUTELEA, L. N.
URSACHI, C.
UYGUN, D.
VAJK, I.
VAN JARSVELD, B.
VAN NIEKERK, D.
VARODI, T.
VIDO, L.
VILCU, V.
VINTILOIU, I.
VITTEK, J.
VODA, A.
VRAZIC, M.
WANG, H.
WANG, J.
WANG, S.
XHELADINI, L.
XU, J.
YAN, Y.
YAO, Z.
YASA, Y.
YAVASOGLU, H. A.
YILDIRIM, D.
YILMAZ, S.
YOUB, L.
YOUSEFITALOUKI, A.
ZAGIRNYAK, M.
ZAMA, A. I.
ZARKO, D.
ZEINALI, R.
ZERDALI, E.
ZHANG, G.
ZHANG, J.
34
28
17
16
11, 13, 17
14
10
15, 16, 24
29
25
25
13
7
26, 30
21
8
11
22
8
15
30
12
14
22
12
25
13
16
11
16
11
29
11
24
9
20
23
10
24
7
25
20, 25
8
10
9
29