Series 79 Micro-Crimp
Connectors and Accessories
The High-Performance Rectangular with
Advanced EMC and Environmental Performance
United States

United Kingdom

Germany

France

Second Edition • June 2011
Nordic

Italy

Spain

Japan
SERIES 79
MICRO-CRIMP
•
U LT R A M I N I AT U R E • S H I E L D E D • E N V I R O N M E N TA L
M
eet the newest member of Glenair’s rectangular connector family, the Series 79 Micro-Crimp. The
ultraminiature Micro-Crimp connector features crimp, rear-release size #23 contacts on .075 inch (1.9 mm)
spacing, as well as size #12 and #16 power, coaxial and fiber optic contacts. Available in 31 hybrid insert
arrangements, the Micro-Crimp offers broad versatility for data and power transmission. Today’s defense/aerospace
systems require advanced levels of environmental protection, electromagnetic shielding and size/weight reduction.
The Series 79 was developed to meet these needs. Panel mounted connectors feature conductive sealing gaskets.
Right angle printed circuit board connectors have an EMI shroud to prevent electromagnetic interference. Wire sealing
grommets and interfacial seals protect circuits from moisture and contamination. Series 79 plugs are also available
with auxillary EMI springs for advanced EMC performance.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497 • Tel: 818-247-6000 • Email: sales@glenair.com • www.glenair.com
Series 79
Micro-Crimp
Introduction
Series 79 Micro-Crimp
Connectors and Accessories
Table of Contents
Introduction to the
Series 79 Micro-Crimp Connector
Product Features,
Selection Guide and
Technology Showcase
A
Contacts.................B-2 to B-7
Tools.....................B-8 to B-11
B
Insert Arrangements.....C-1
Materials and Specs......C-5
Plating Options...............C-9
Space Grade Versions...C-10
Panel Cutouts..............C-14
C
Crimp Terminated
Cable Connectors
790-024P and 790-025S
D
Crimp Terminated
Panel Mount Connectors
790-026P, 790-027S,
790-050P, 790-049S
E
Straight PCB Panel Mount
and Free-Standing Connectors
790-028P, 790-043P,
790-029S, 790-044S,
F
Right Angle PCB Panel Mount
and Free-Standing Connectors
790-036P, 790-041P,
790-037S, 790-042S
G
Backshells and Accessories,
EMI Adapters and Protective Covers
799-015,799-016,
799-011, 799-018,
799-019
H
Signal, Power and Coaxial
Contacts and Crimp Tools
General Information
and Reference
1
A1
5
2
6
4
3
7
8
A2
9
INDEX
Part Number Index
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
A-1
Series 79
Micro-Crimp
Introduction
Introduction to the
Series 79 Micro-Crimp Connector
The Micro-D Connector with Crimp Contacts
A
Meet the newest member of
Glenair’s Micro-D family, the
Series 79 Micro-Crimp. The
Micro-Crimp connector features crimp, rear-release size #23 contacts
on .075 inch (1.9 mm) spacing, as well as size #12 and #16 power
and coaxial crimp contacts in a range of hybrid layouts. Available in
31 insert arrangements, the Micro-Crimp provides a wide selection of
arrangements for data and power transmission.
M ICRO -C RIMP
TM
Cable P
Plug With
Socket Contacts
C
and
EMI
d EM
MI Spribng
Today's defense/aerospace systems require advanced levels of
environmental protection, electromagnetic shielding and size/weight
reduction. The Series 79 was developed to meet these needs. Panel
mounted connectors feature conductive sealing gaskets. Right angle
printed circuit board connectors have an EMI shroud to prevent
electromagnetic interference. Wire sealing grommets and interfacial
seals protect circuits from moisture and contamination. Series 79 plugs
are available with auxillary EMI springs for superior EMC performance.
Cable Receptacle
R
With Pi
Pin
i Contacts
Receptacle
Panel Mount Rec
cep
Tails
with Straight P
PC T
Right Angle
Panel Mountt R
PCB Plug with
h EMI Shroud
Spring
and EMII S
BeCu Insert
Retention Clip
Fluorosilicone
Grommet
Machined
Aluminum
Shell
EMI Spring
Three Contact Sizes:
12, 16 and 23
Fluorosilicone
Interfacial Seal
30% Glass-Filled
LCP Insulators
BeCu Insert
Retention Clip
Gold-plated BeCu
Contact with SST
Hood
Fluorosilicone
Grommet
RTV Sealing
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
A-2
Series 79
Micro-Crimp
Introduction
Series 79 Micro-Crimp Connector
Selection Guide
Plug Connectors
A
(Socket Contacts)
Crimp Termination
Printed Circuit Board
Printed Circuit Board
For Attaching Wire or Cable
For Rear Panel Mounting
Free-Standing
Standard
Cable
Rear Panel
Mount
Float
Mount
Straight
PCB
Right Angle
PCB
Straight
PCB
Right Angle
PCB
790-025S
790-027S
790-049S
790-029S
790-037S
790-044S
790-042S
Page D-4
Page E-6
Page E-17
Page F-16
Page G-16
Page F-21
Page G-21
Receptacle Connectors
(Pin Contacts)
Crimp Termination
Printed Circuit Board
Printed Circuit Board
For Attaching Wire or Cable
For Rear Panel Mounting
Free-Standing
Standard
Cable
Rear Panel
Mount
Float
Mount
Straight
PCB
Right Angle
PCB
Straight
PCB
Right Angle
PCB
790-024P
790-026P
790-050P
790-028P
790-036P
790-043P
790-041P
Page D-1
Page E-1
Page E-11
Page F-1
Page G-1
Page F-6
Page G-6
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
A-3
www.glenair.com
Series 79
Micro-Crimp
Introduction
A
Series 79 Micro-Crimp Connector
Technology Showcase
M ICRO -C RIMP
RUBBER
GROMMET
RETAINER
TINE
TM
Technology Showcase
Integrated Ground Spring
Series 79 plugs are available with
auxiliary EMI springs for superior EMC
performance.
Low profile EMI adapters
ters for cable
braid termination with Glenair’s BANDIT® straps.
Rear-Release Crimp Contacts
Series 79 Size #23 contacts conform
to the AS39029 requirements, but are
not covered by a slash sheet. Size #16
and size #12 contacts are standard
“QPL” contacts used in MIL-DTL-38999
connectors.
Shielded Panel Mount Connectors
Avoid EMI problems “inside-the-box”
with optional EMI adapters. These
adapters attach to standard panel mount
crimp-type
cri
mp-type
mp
type versions.
versions
EMI Backshell Adapters
These two-piece adapters fit into
a groove on Micro-Crimp cable
connectors. Attach to connector with
screws (provided). Elliptical banding
platform provides ample room for
large wire bundles.
Integrated EMI Shroud
Right angle printed circuit board
connectors have an EMI shroud to
prevent electromagnetic interference.
P
Panel
l mountt connector
t with
ith optional
ti
l EM
EMI
adapter.
Jackpost Hardware Options
A complete range of jacking hardware
is available including captivated, lowprofile and extended versions.
#16 Fiber Optic Contacts
Gold-plated M39029 size #12 and #16
contacts for high current capacity.
Snap-In COAX & Power Pins
Size #12 contacts accept #12-14 AWG
wire. Size 12 and 16 cavities also
accept coaxial contacts purchased
separately. These crimp contacts are
plated with 50 microinches gold over
nickel underplating.
Size #16 fiber optic termini are compatible with all Series 79 Micro-Crimp
connectors with size #16 cavities.
These snap-in, rear-release termini
feature precision ceramic ferrules
and sleeves for accurate fiber alignment. Typical insertion loss 0.5 dB.
Fits 50/125 and 62.5/125 multi mode
and 9/125 single mode fiber. Stainless
steel bodies and springs.
1
A1
5
2
6
4
3
7
8
A2
9
Over Thirty Layouts
Twelve different shell sizes are offered
with from 5 to 102 contacts. #23, #16
and #12 AWG cavities accept signal,
power, shielded and fiber optic contacts.
Hybrid layouts support a wide range of
common requirements.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
A-4
Series 79
Micro-Crimp
Introduction
Series 79 Micro-Crimp Connector
Technology Showcase
M ICRO -C RIMP
TM
Technology Showcase
Pneumatic Contacts
Series 79 with size #12 power pins for
up to 23 amp current capacity.
acity.
Snap these “gas” pitot tube contacts
snap into any size #12 contact cavity
and are designed for air speed sensor
applications. Attach standard tubing
tubin
to the contact.. The
These stainless
ainless steel
e
contacts
acts are removable.
remov
ovvable.
Right angle PCB connectors for thr
thruhole termination
Micro-Crimp Combo Layouts
Thirty-one contact arrangements are
available with size #23 contacts for
signal and data, size #16 contacts
for up to 13 amps power, or size #12
contacts for up to 23 amp capacity. All
31 arrangements are available with
crimp pins or with printed circuit tails.
Right Angle PCB Header
Size
e #12 pneumatic
pneu
contacts
ntacts withsta
withstand
up to 1
100 PSI air pressure
re for p
pitot tube
applications.
Float Mount Connectors
790-050P connectors are equipped
with rear-panel float mounting
assemblies to provide additional
mounting lee-way in rack and panel
applications.
Protective Covers
790-028PH-66 with stainless steel guide
pins for blind mate applications.
Guide Pins for Blind Mating
Series 79 panel connectors can be
configured with guiding hardware for
module-to-chassis applications.
Available in panel mount (shown)
or free-standing versions, these
connectors feature an EMI shroud
and threaded board mounting holes.
Float Mount connectors feature machined
aluminum shells and wire grommets for
environmental protection.
Conductive Panel Gaskets
Panel mount connectors are supplied
with conductive fluorosilicone gaskets
for sealing to bulkheads. These gaskets
provide an easy way to assure a
watertight installation.
Machined aluminum covers prevent
ingress of water and contamination.
Plug covers provide metal-tometal bottoming for EMI protection.
Receptacle covers feature conductive
fluorosilicone gaskets. For attachment,
Choose small diameter eye fittings
for panel attachment. Larger rings fit
over cable jackets. Split rings can be
installed on fully assembled cables.
Watertight EMI gaskets are supplied
with all panel mount Micro-Crimp
connectors.
Shield Termination System
Glenair Band-Master Advanced
Termination System delivers turnkey
shield termination tools, bands and
calibration services.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
A-5
www.glenair.com
A
SERIES 79
MICRO-CRIMP
CONTACTS • ASSEMBLY TOOLS • BAND
BAND-MASTER™ ATS
S
eries 79 Micro-Crimp signal, power and coaxial co
contacts are crimped to wire using mil spec crimpers. The MicroCrimp connector features crimp, rear-release size #23 contacts on .075 inch (1.9 mm) spacing, as well as size #12
and #16 power, coaxial, fiber optic contacts in a range of hybrid layouts. Available in 31 insert arrangements, the
Micro-Crimp provides a wide selection of arrangements for data and power transmission. Military Specification MILDTL-22520 provides the aerospace/defense industry with a common set of rugged, reliable hand crimp tools. This
specification controls the voltage drop and tensile strength of crimp terminations. The Series 79 Micro-Crimp family
of products is well-supported with a complete range of contacts, tools and assembly instructions for turnkey assembly
and use.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497 • Tel: 818-247-6000 • Email: sales@glenair.com • www.glenair.com
Series 79
Contacts
and Tools
Series 79 Micro-Crimp
Section B: Contacts and Tools
Series 79 Micro-Crimp Contacts and Tools
ols
Signal and Power Contacts
B-2
Coaxial Contacts
B-5
Pneumatic Contacts
B-7
Crimp Tools
B-8
Insertion/Extraction Tools
B-10
Band-Master™ Tool and Bands
B-11
About Mil Spec Contacts For Series 79 Micro-Crimp Connectors
Aerospace Standard AS39029
(SAE) defines the design, dimensions
and performance of contacts used in
aerospace grade electrical connectors.
The “general specification” covers a
variety of contacts including thermocouple,
hermetic, coaxial and triaxial types.
The "slash sheets" contain
dimensions and other information for
specific types of contacts. For example,
pin contacts used in MIL-DTL-38999
connectors are specified
in AS39029/58. Each contact is assigned a
Basic Identification Number (BIN), a nonsignificant three digit code corresponding to
the color code on the contacts. A Qualified
Products List (QPL) identifies those
manufacturers whose products have been
verified to meet all requirements. Series 79
Size #23 contacts conform to the AS39029
requirements, but are not covered by
a slash sheet. Size #16 and size #12
contacts are standard “QPL” contacts used
in MIL-DTL-38999 connectors.
Coaxial contacts are covered by
AS39029.These contacts are not
recommended for high frequency
applications. Note 6.1.2 states “Type
D contacts are coaxial contacts...
to shield the circuit from unwanted
interference (RFI and EMI). These
contacts are not impedance
(matched) and, therefore, are not
recommended for RF use.” Matched
impedance 50 ohm coaxial contacts
are available but are not covered by
the AS39029 specification.
About Mil Spec Crimp Tools
Series 79 Micro-Crimp signal, power
and coaxial contacts are crimped to
wire using mil spec crimpers. Military
Specification MIL-DTL-22520 provides
the aerospace/defense industry with a
common set of rugged, reliable hand
crimp tools. This specification controls the
voltage drop and tensile strength of crimp
terminations.
Before ordering, check to see if you
might already have these tools! We
have listed the military part number
and the Daniels part number. Daniels
Manufacturing Corporation is the leading
manufacturer of these tools. The size 23
positioner part number 809-005 is not a
standard tool. Chances are, you will need
this positioner
Calibration: gage pins are available
for checking crimp tool calibration.
Tools should be checked periodically.
If a tool needs calibration, the mil spec
requires calibration to be performed
by the manufacturer or a certified
ANSI-Z540.1 agency. Gauging and
calibration information is supplied in the
box with the tool.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
B-1
www.glenair.com
B
Series 79
Contacts
and Tools
Size #23 Copper Alloy Crimp Contacts
Size #23 Copper Alloy Crimp Contacts
B
#23 Pin Contact
Contact
Type
Wire Size
Material
ØA
Pin
Pin
Pin
#22 – #28
#26 – #30
#22 – #28
BeCu
BeCu
Alumel
Pin
#22 – #28
Chromel
Socket
#22 – #28
BeCu
Socket
Socket
Socket
#26 – #30
#22 – #28
#22 – #28
BeCu
Alumel
Chromel
Part Number
809-001
809-042
809-065A
809-065C
809-002
809-043
809-066A
809-066C
.0335-.0355
.0229-.0245
.0335-.0355
0.851-0.902
0.582-0.622
0.851-0.902
None
Blue
None
A, C
A, D
A, C
.0335-.0355
0.851-0.902
None
A, C
.0335-.0355
.0229-.0245
.0335-.0355
.0335-.0355
0.851-0.902
0.582-0.622
0.851-0.902
0.851-0.902
None
Blue
None
None
A, C
A, D
A, C
A, C
.289 (7.34)
.283 (7.19)
CRIMP TENSILE STRENGTH
Values are in pounds and are minimums.
Wire
Gage
#22
#24
#26
#28
#30
mm.
Standard size #23 contacts accept #22 to #28 AWG wire. Choose "small bore"
versions for #26 to #30 AWG wire. For thermocouple applications, specify alumel
or chromel contacts. Contacts are bulk packaged. Terminate with standard
M22520 crimper with special positioner.
#23 Socket Contact
Silver or Tin
Coated Copper
Wire
12
8
5
3
1.5
Color Tool
Band Code
In.
Nickel
Coated
Copper Wire
8
6
3
2
1.5
.165 (4.19)
.160 (4.06)
Ø .048 (1.22)
.044 (1.12)
#23 Pin
Contact
Ø .0275 (0.699)
.0265 (0.673)
.034 (0.86)
.029 (0.74)
SPHERICAL RADIUS
.015 (0.38) MAX FLAT
ØA
COLOR
BAND
COLOR
BAND
Ø .048 (1.22)
.044 (1.12)
Material and Finish
Copper
alloy per ASTM B196 or
B197, 50 microinches gold plated per
ASTM B488 Type 3 Code C Class
1,27 over nickel plate per QQ-N-290
Class 2, 50-100 microinches.
Thermocouple contacts: alumel or
chromel alloy, unplated, per ANSI
96.1
Socket contact hood: stainless steel,
passivated per AMS-QQ-P-35.
.440 (11.18)
MAX
HOOD
Ø .056 (1.42)
MAX
#23 Socket
Contact
Ø .053
(1.35)
MAX
.275 (6.99)
.265 (6.73)
.031 (0.79)
.025 (0.64)
ØA
.055 (1.40)
MAX
Specifications
Crimp Tools and Insertion/Removal Tools
Current

Rating: 5 Amps maximum
Voltage Drop (at 5 Amps and 25° C):
70 millivolts maximum
Temperature Range: -65° to + 200° C
Socket Contact Minimum Separation
Force: 0.5 ounces


Crimper: 809-015
Positioner: 809-005 (standard). Use P/N 809-057 for small bore
contacts 809-065 and 809-066
Standard Insertion/Removal Tool: 809-088
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
B-2
Series 79
Contacts
and Tools
Size #23 Copper Alloy Crimp Contacts
Termination, Installation and Removal
How to Terminate, Install and Remove Size #23 Contacts
Set Up Crimp Tool. Install proper positioner into
crimp tool. The label on the positioner shows
the proper tool setting for each wire size. Turn the
adjustment wheel to the correct setting.
Strip Wire. Remove wire insulation, taking care to
avoid nicking or cutting wire strands. Strip wire to
length shown.
Insert wire into contact. The wire should be
visible in the inspection hole.
Insert contact into crimp tool as shown. Make
sure that the contact is fully inserted into the tool.
Squeeze handle completely. The ratchet mechanism
will not allow a partial crimp. Release handle and
remove contact.
Inspect crimped contact. Wire should be fully
inserted and the crimp should be uniform in
appearance.
1
2
3
4
Adjustment Wheel
1
.145/.155
(3.68/3.94)
Crimp Tool
B
2
Positioner
INSPECTION
HOLE
5
3
Insertion/Extraction Tool 809-088
EXTRACTION TIP
WHITE END
INSERTION TIP
BLUE END
Install contact into connector. Push the contact
through the rear grommet until the contact locks
into place. This can usually be done by hand without
the need for a tool. If the wire gage is #26 or smaller,
a tool is helpful. There are two techniques for installing
contacts with a tool. One method is to push the contact
in by hand, then use the tool to finish the insertion. The
other method is to position the insertion tip against
the contact shoulder, then insert the contact. Use
insertion/extraction tool 809-088 to install contacts.
Slide the wire into the groove on the blue end of the
tool. Slide the tool tip up the contact until it touches
the contact shoulder. USE CARE TO AVOID
DAMAGING THE CONNECTOR.
Contact Extraction. Use tool 809-088. The white
end is used for contact extraction. First, push the
wire into the groove of the metal tip. Slide the tip of the
tool into the connector. Push the tool into the connector
cavity until the tip bottoms in the connector. Avoid
wiggling or rocking the tip. This may damage the cavity. A
straight push is best. Pinch the wire between your finger
and the white plastic grip and slide the tool and contact
out of the connector. Wire insulation diameter
greater than 0.045 inches (1.14mm) is too
large to work properly with the extraction
tool. connector damage is possible.
6
7
4
CONTACT
RETAINER CLIP
5
RUBBER
GROMMET
RETAINER
TINE
6
RUBBER
GROMMET
7
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
B-3
www.glenair.com
Series 79
Contacts
and Tools
Adapter for Crimping #20 AWG Wire to Size 23
Contacts; Size 16 Power Contacts;
Size 12 Power Contacts
Adapter for Crimping #20 AWG Wire to Size #23 Series 79 Contacts
Size #22 AWG wire is the largest wire size that fits standard size 23 contacts. Use this
adapter to attach larger #20 gage wire. First, crimp wire to adapter, then crimp the adapter
into the size #23 contact. Adapters are made of tellurium copper alloy #1452, and are
gold plated. Crimp with M22520/1-01 tool and 809-138 (Daniels TH653) positioner. These
adapters cannot be removed from connectors.
B
STD. #23 PIN
.160 (4.1)
#20 AWG Wire Adapter
Adapter
Size
Wire Size
#22-20
#20
.430 (10.9)
MAX
.059 (1.5) MAX
Tool
Code
Part Number
809-093
.048/.040
1.2/1.0
.031/.026
0.8/0.7)
#20 AWG
WIRE
809-093
I, K
Size #16 Power Contacts, Crimp Termination
Standard size #16 contacts accept #16 to #20 AWG wire. At rated test current of 13 amps, the
maximum voltage drop is 74 millivolts. Contacts are gold-plated copper alloy. Socket contacts
feature stainless steel hoods to protect against probe damage. Approved to SAE-AMS-39029.
Contacts are bulk packaged. Terminate with M22520/1-01 crimper and M22520/1-04
positioner. .531 (13.49)
.103 (2.62)
.103 (2.62)
.518 (13.16)
#16 Pin Contact
MAX
REF
Ø .0635 (1.613)
.0616 (1.562)
#16 Socket Contact
.068 (1.73)
.066 (1.68)
Contact
Type
Wire Size
Pin
Socket
#16 – #20
#16 – #20
MAX
REF
Ø .113 (2.87)
MAX
.130 (3.30)
MAX
Military Part
Number
M39029/58-364
M39029/57-358
Part Number
809-110
809-111
1st
.068 (1.73)
.066 (1.68)
Color Band
2nd
3rd
Orange Blue
Orange Green
.130 (3.30)
MAX
Tool
Code
Yellow I. J
Gray
I, J
Size #12 Power Contacts, Crimp Termination
#12 Pin Contact
Contta
Standard size #12 contacts accept #12 to #14 AWG wire. At rated test current of 23 amps,
the maximum voltage drop is 63 millivolts. Contacts are gold-plated copper alloy. Socket
contacts feature stainless steel hoods to protect against probe damage. Approved to SAE
AS39029. Contacts are bulk packaged. Terminate with M22520/1-01 crimper and M22520/104 positioner.
.151 (3.84)
.151 (3.84)
.531 (13.49)
.518 (13.16)
MAX
REF
Ø .095 (2.41)
.093 (2.36)
#12 Socket Contact
Contact
Type
Wire Size
Pin
Socket
#12 – #14
#12 – #14
.102 (2.59)
.098 (2.49)
Part Number
809-112
809-113
MAX
REF
.182 (4.62)
MAX
Ø .161 (4.09)
MAX
Military Part
Number
M39029/58-365
M39029/57-359
1st
.102 (2.59)
.098 (2.49)
Color Band
2nd
3rd
Orange Blue
Orange Green
.182 (4.62)
MAX
Tool
Code
Green I, J
White I, J
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
B-4
Series 79
Contacts
and Tools
Size 16 Coaxial Contacts, Size 12 Coaxial Contacts
Size #16 Coaxial Contacts, Crimp Termination
#16 Pin Contact
These #16 contacts accept 50 ohm and 75 ohm coaxial cable. Inner contact is rated at 1
amp, the outer contact 12 amps. DWV voltage rating is 800 Vac rms sea level, 250 Vac at
50,000 feet. Contacts are packaged individually and are unassembled with instruction sheet.
One contact consists of outer contact , fluorocarbon dielectric, inner contact and shield crimp
sleeve. Inner and outer contacts are gold-plated copper alloy. Approved to SAE AS39029.
VSWR rating 1.5:1 maximum up to 700 MHz. 5000 megohm insulation resistance.
.130 (3.30)
MAX
.570 (14.48)
MAX
#16 Socket Contact
Ø .0635 (1.613)
.0616 (1.562)
Type
Pin
Pin
Socket
Socket
SHIELD CRIMP
SLEEVE
Cable Size
Part Number
RG174, RG316, RG179 809-114
RG178
809-115
RG174, RG316, RG179 809-116
RG178
809-117
.130 (3.30)
MAX
.560 (14.22)
MAX
Ø .113 (2.87)
MAX
Military Part
Number
M39029/76-424
M39029/76-425
M39029/78-432
M39029/78-433
SHIELD CRIMP
SLEEVE
1st
Color Band
2nd
3rd
Yellow
Yellow
Yellow
Yellow
Red
Red
Orange
Orange
Tool
Code
Yellow
Green
Red
Orange
A, E, L, M
A, E, L, M
A, E, L, M
A, E, L, M
Size #12 Coaxial Contacts, Crimp Termination
#12 Pin Contact
These #12 contacts accept 50 ohm and 75 ohm coaxial cable. Inner contact is rated at 1
amp, the outer contact 12 amps. DWV voltage rating is 1000 Vac rms sea level, 250 Vac at
50,000 feet. Contacts are packaged individually and shipped unassembled with instruction
sheet. One contact consists of outer contact , fluorocarbon dielectric, inner contact and
shield crimp sleeve. Inner and outer contacts are gold-plated copper alloy. Approved to SAE
AS39029. VSWR rating 1.5:1 maximum up to 700 MHz. 5000 megohm insulation resistance.
.570 (14.48)
MAX
#12 Socket Contact
Ø .095 (2.41)
.093 (2.36)
Type
Pin
Pin
Socket
Socket
.182 (4.62)
MAX
SHIELD CRIMP
SLEEVE
Cable Size
Part Number
RG174, RG316, RG179 809-118
RG180
809-119
RG174, RG316, RG179 809-120
RG180
809-121
.182 (4.62)
MAX
.560 (14.22)
MAX
Ø .161 (4.09)
Military Part
Number
M39029/28-211
M39029/28-409
M39029/27-210
M39029/27-402
1st
SHIELD CRIMP
SLEEVE
Color Band
2nd
3rd
Red
Yellow
Red
Yellow
Brown
Black
Brown
Black
Brown
White
Black
Red
Tool
Code
A, G, N, O
A, G, N, O
A, G, N, O
A, G, N, O
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
B-5
www.glenair.com
B
Series 79
Contacts
and Tools
Size 12 50 Ohm Matched Impedance
Coaxial Contacts
Size #12 50 Ohm Matched Impedance Coaxial Contacts
These contacts offer improved frequency response compared to standard coaxial contacts
above. VSWR is 1.32:1 at 3GHz . Nominal impedance is 50 ohms. Insertion loss at 3GHz
is 0.20 dB maximum. Inner contact is rated at 1 amp, the outer contact 12 amps. DWV
voltage rating is 1000 Vac rms sea level, 250 Vac at 50,000 feet. Contacts are packaged
individually and shipped unassembled with instruction sheet. One contact consists of outer
contact, fluorocarbon dielectric, inner contact and shield crimp sleeve. Inner and outer
contacts are gold-plated copper alloy. 5000 megohm insulation resistance. Terminate
crimp type coaxial center contact with hand tool 809-128 (Daniels MH992). Terminate
cable braid to contact with 809-129 (Daniels HX4) parallel action crimp tool and 809-120
(Daniels Y196) hex die.
#12 Pin Contact
B
Contact
Type
Pin
Pin
Pin
Pin
#12 Socket Contact
Socket
Socket
Socket
Socket
Cable Type
Part Number
809-123
852-016-01
852-016-02
852-018
RG178
809-122
M17/113-RG316
852-015-01
M17/152-00001(RG316DS) 852-015-02
TFLEX-405
852-017
RG178
M17/113-RG316
M17/152-00001(RG316DS)
TFLEX-405
.570 (14.48) MAX
.300/.295
(7.62/7.49)
.300/.295
(7.62/7.49)
.182/.179
(4.62/4.55)
SKT TO MATE WITH
.0205/.0195
(0.521/0.495) PIN
.033/.029
(0.83/0.74)
.182/.179
(4.62/4.55)
CRIMP
FERRULE
Ø .0205/.0195
(0.521/0.495)
SOLDER
HOLE
SKT TO MATE WITH
.0205/.0195
(0.521/0.495) PIN
.033/.029
(0.83/0.74)
Figure 2
.560 (14.22) MAX
.560 (14.22) MAX
.289/.279
(7.34/7.09)
.151/.148
(3.84/3.76)
.151/.148
(3.84/3.76)
Ø.182/.179
.161/.158
(4.62/4.55) (4.09/4.01)
.161/.158
(4.09/4.01)
.033/.029
(0.83/0.74)
Tool Code
B, F, P, Q
B, H, P, Q
B, H, P, Q
(No Tool)
B, F, P, Q
B, H, P, Q
B, H, P, Q
(No Tool)
.151/.148
(3.84/3.76)
Ø.095/.093
(2.41/2.36)
Figure 1
.289/.279
(7.34/7.09)
Fig.
1
1
1
2
3
3
3
4
.570 (14.48) MAX
.151/.148
(3.84/3.76)
Ø.095/.093
(2.41/2.36)
Termination
Crimp
Crimp
Crimp
Solder
Crimp
Crimp
Crimp
Solder
CRIMP
FERRULE
Ø.182/.179
(4.62/4.55)
SOLDER
HOLE
Ø .0205/.0195
(0.521/0.495)
Figure 3
.033/.029
(0.83/0.74)
Figure 4
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
B-6
Series 79
Contacts
and Tools
Size 12 Pneumatic Contacts
Size #12 Pneumatic Contacts
Stainless steel pneumatic contacts attach to 3/32 inch (2.38) diameter tubing. Socket
contact has o-ring and PTFE backup washers. Contacts snap into size #12 connector
cavities. Ideal for pitot tube connections, these pneumatic contacts are rated for 100 PSI
maximum air pressure. No installation tool is required. Remove contacts with plastic
extraction tool 809-132.
#12 Pin Contact
B
Contact Type
Tube I.D.
Pin
Socket
.094 (2.38)
.094 (2.38)
Ø.080/.077
(2.03/1.96)
Part Number
857-011
857-010
.300/.295
(7.62/7.49)
.033/.029
(0.83/0.74)
.85 (21.6)
#12 Socket Contact
.050
(1.27)
.093/.095
(2.36/2.41)
Ø.182/.179
(4.62/4.54)
Ø.151/.148
(3.84/3.76)
Ø.135/.132
(3.43/3.35)
857-011 Pin Contact
Ø.086/.084
(2.18/2.13)
.289/.279
(7.34/7.09)
.033/.029
(0.83/0.74)
.85 (21.6)
Blind mate panel mount connector with
pneumatic size #12 contacts
Ø.161 (4.09) MAX
Material and Finish
Body and Cap: stainless steel, passivated
O-ring: fluorosilicone
Washers: PTFE
Ø.182/.179
(4.62/4.54)
Ø.151/.148
(3.84/3.76)
Ø.135/.132
(3.43/3.35)
857-010 Socket Contact
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
B-7
www.glenair.com
Series 79
Contacts
and Tools
Crimp Tools and Positioners
Miniature Adjustable Crimp Tools
These crimp tools perform precision eight indent crimps for gas-tight wire terminations and excellent tensile strength. Adjustment wheel
has 8 settings. Ratchet mechanism prevents improper crimps. Use with bayonet-type positioners. Check calibration with M22520/3
gages. Length is 6.75 inches, weight is approx. 10 oz.
A
B
B
Standard M22520/2-01 crimper.
Use with standard size #23 "Mighty
Mouse" contacts and with M39029/76
and /78 coaxial center contacts. Requires
positioner, ordered separately.
A
Figure
A
B
Special MH992 crimper used
with 50 ohm matched impedance
coaxial inner contacts. Requires
positioner, ordered separately.
B
Military Part
Number
M22520/2-01
(none)
Part Number
809-015
809-128
Daniels Part
Number
AFM8
MH992
Tool Code
A
B
Positioners for Use with Miniature Adjustable Crimp Tools
These bayonet-type positioners hold contacts at correct height for crimping with M22520/2 type miniature step adjustable tools,
above. Face plate shows correct tool settings.
C
E
D
C
Positioner for standard size #23
contacts. #22-#28 AWG. Use with
809-015 crimp tool.
F
D
Positioner for small bore size #23
contacts. #26-#30 AWG. Use with
809-015 crimp tool.
Positioner for M39029/27 and 28
#12 coaxial inner contact. Use with
809-015 crimp tool.
Positioner for M39029/76 and 78
coaxial inner contact. Use with
809-015 crimp tool.
Positioner for matched impedance
#12 coaxial inner contact. Use with
809-128 crimp tool.
E
F
Figure
G
C
D
H
E
F
G
H
Part Number
809-005
809-057
809-125
809-124
809-135
859-006
Positioner for matched impedance
#12 coaxial inner contact. Use with
809-128 crimp tool.
G
H
Military Part
Number
(none)
(none)
M22520/2-35
(none)
M22520/2-34
(none)
Daniels Part
Number
K1461
(none)
K532-1
K1360
K323
K1721
Tool Code
C
D
E
F
G
H
Crimp Tool and Positioner for #12 and #16 Power Contacts and 809-093 Adapters
I
J
K
Crimp tool for use with size #16 and
#12 power pins. 9.75 inches OAL,
1.25 pounds. Use with M39029/57 and
/58 contacts and 809-093 adapters.
I
Figure Part Number
I
809-136
J
809-137
K
809-138
J
K
Military Part Number
M22520/1-01
M22520/1-04
(none)
Positioner for use with size #12 and
#16 Power contacts.
Positioner for use with 809-093
adapters.
Daniels Part Number
AF8
TH163
TH653
Tool Code
I
J
K
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
B-8
Series 79
Contacts
and Tools
Crimp Tools, Positioners, and Hex Die Sets
Crimp Tool and Positioner for #16 Coaxial Outer Contact
For crimping size #16 shield sleeves. These mil spec approved tools feature a ratchet mechanism to prevent damage from overcrimping.
Check calibration with M22520/3 gage.
Crimp tool for use with size #16
coaxial contacts. Blue handles.
9.75 inches OAL, 1.25 pounds.
L
L
Positioner for use with size #16
coaxial contacts. Use with 809127 (M22520/4-01) crimp tool.
M
B
M
Figure
L
M
Part Number
809-127
809-126
Military Part
Number
M22520/4-01
M22520/4-02
Daniels Part
Number
GS100-1
GP295
Tool Code
L
M
Crimp Tool and Positioner for #12 Coaxial Outer Contact
For crimping size #12 shield sleeves. These mil spec approved tools feature a ratchet mechanism to prevent damage from overcrimping.
Check calibration with M22520/3 gage.
N
Crimp tool for use with size #12
coaxial contacts. Black handles.
9.75 inches OAL, 1.25 pounds.
N
Figure
N
O
O
Part Number
809-133
809-134
Military Part
Number
M22520/31-01
M22520/31-02
Positioner for use with size #12
coaxial contacts. Use with 809133 (M22520/31-01) crimp tool.
O
Daniels Part
Number
GS200-1
G2P330
Tool Code
N
O
Parallel Action Crimp Tool and Hex Die Set for 50 Ohm Matched Impedance #12 Coax
Parallel action tool for use with hex
crimp dies. 11 inches OAL, 2.0
pounds. Anodized aluminum frame, steel
mechanism, plastic handles. Includes
tool for die set removal. Accepts all
M22520/5 die sets.
A
B
Q
A
P
B
P
Die set for terminating coaxial
shield to outer contact. Use
with size #12 matched impedance
M39029/102 and 103 type coaxial
contacts. Set consists of upper and
lower halves. Made of hardened steel
with black oxide finish. Approximately 2
inches in length, assembled. Die set has
two closures per illustration.
Q
A .128 (3.25) HEX
B .105 (2.67) HEX
Figure
P
Q
Part Number
809-129
809-130
Military Part
Number
M22520/5-01
M22520/5-03
Daniels Part
Number
HX4
Y196
Tool Code
P
Q
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
B-9
www.glenair.com
Series 79
Contacts
and Tools
Contact Insertion and Removal Tools
Contact Retention Tester
Contact Insertion and
nd Removal
R
Tools
Too
1
2
4
3
B
Insertion/Extraction Tool
for #23 Contacts. This
economical tool features
molded plastic grips and
sturdy stainless steel tips.
Insertion Tool for #23
Contacts. This tool
features anodized aluminum
handle and stainless steel
insertion tip.
1
Figure
2
Size
#23
#23
#16
#12
1
2
3
4
Type
Insertion/Extraction
Insertion Only
Insertion/Extraction
Insertion/extraction
Insertion/Extraction Tool
for #16 Contacts. Use
with size #16 coaxial or power
contacts. Economical molded
plastic. White extraction tip,
blue insertion tip.
3
Part Number
809-088
809-013
809-131
809-132
Insertion/Extraction Tool
for #12 Contacts. Use
with size #12 coaxial or power
contacts. Economical molded
plastic. White extraction tip,
yellow insertion tip.
4
Military Part Number
(None)
(None)
M81969/14-03
M81969/14-04
Daniels Part
Number
(None)
DAK225-22
(None)
(None)
Contact Retention Tester for Size #23 Contacts
Check for properly seated
contacts with this springloaded tester. Apply the tool
tip to the mating end of a
contact. Push on the handle
until the spring compresses
to the recommended force.
A visual indicator shows full
compression. The contact is
properly retained if it is not
displaced.
1
Figure
1
2
2
Description
Handle
Pin Tip
Socket Tip (not shown)
Complete Kit
The adjustable handle
should be set to 3.2 pounds
(14.2 N). The pin tip is used
with #23 pin contacts. The
socket tip is used with #23
socket contacts.
Order the complete kit,
or order the tips and handle
separately.
Part Number
809-107-1
809-107-2
809-107-3
809-107-4
Daniels Part
Number
HT250-2
68-023-01
67-023-01
(None)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
B-10
Series 79
Contacts
and Tools
Band-Master™ Advanced Termination System
Band-Master™ Advanced Termination System
Fast, Cost-Effective
Shield Termination
Attach cable braid shields to EMI backshells
™
with Band-Master ATS stainless steel straps.
™
The Band-Master ATS system offers fast
termination and the flexibility to handle different
diameters with the same band.
IMPORTANT NOTE: ALWAYS DOUBLEWRAP BANDS!
B
Micro Band Tool
Part Number 600-061
Contact Glenair or visit our website
(glenair.com) to view our complete line of
™
Band-Master ATS products, including
pneumatic tools for high production and
calibration kits.
Standard Band Tool
Part Number 600-058
1.18 lbs.
6.75 Inches (172mm.) Length
Step One: Cable Prep
Step Two: Install Band
Step Three: Trim Braid
Lay individual shields over the band platform.
Pull overall braid shield over the band platform
so that all braid strands will be captured by the
band.
Wrap the band through the buckle twice.
Insert the free end into the banding tool in
the direction shown on the tool. Squeeze the
short grey handle to insert the band. Slide the
band onto the cable. Close the black handle
repeatedly until the handle no longer opens.
Close the long grey handle until the tool cuts
the band. Remove the excess band from the
tool by closing the small grey handle.
It’s a snap! Just trim the excess braid and
you’re done.
HOW TO ORDER BANDS
Band Type
Micro Band, Standard Length
Micro Band, Extended Length
Standard Band, Standard Length
Standard Band, Extended Length
Width
In.
mm.
Length
In.
mm.
.120
3.05
8.125
206.38
.120
.240
.240
3.05
6.10
6.10
14.25
14.256
18.00
361.95
362.10
457.20
Part Number
Uncoiled
Coiled
600-057
600-057-1
600-083
600-083-1
600-052
600-052-1
600-090
600-090-1
Use With Accomodates Dia.
Tool
In.
mm.
.88
22.35
600-061
1.88
47.75
600-061
1.80
45.72
600-058
2.50
63.50
600-058
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
B-11
www.glenair.com
SERIES 79
MICRO-CRIMP
INSERT ARRANGEMENTS • SPECIFICATIONS • MOD CODES
M
icro-D connectors are a popular choice for space flight. Their small size and reduced weight, combined with
excellent shock and vibration performance, has led to their widespread use on space vehicles. The Micro-Crimp
connector brings the benefits of a crimp, rear-release contact system to the Glenair Micro-D family. Connectors
can be terminated onto complicated, multi-branch wiring harnesses without splicing or soldering. Specifying a Series 79
Micro-Crimp connector for space flight may include NASA screening and outgassing processing (managed with simple
mod codes) or material and plating selections such as the gold-plated micro-crimp connector shown above. See page
C-9 for the complete range of material and plating options.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497
• Tel: 818-247-6000 • Email: sales@glenair.com • www.glenair.com
www.glenair.com
Series 79
General
Information
Series 79 Micro-Crimp General Information
Insert Arrangements
Micro-Crimp Insert Arrangements
How To Order Connectors for Use
with Coaxial or Pneumatic Contacts
Coaxial and pneumatic contacts are ordered separately.
Series 79 connectors can be ordered without size #16
or #12 power contacts. Change the “P” in the contact
arrangement (11P2, for example) to “W” (11W2). An 11P2
connector is packaged with nine size #23 signal contacts
and two size #16 power contacts. An 11W2 is supplied
with nine size #23 contacts only.
Contact Arrangement Nomenclature Explained
The first letter represents the shell size. The number
following the shell size represents the total number of
contacts. If the insert arrangement is a mixed layout with
signal contacts and coaxial/power contacts, the letter
"W" specifies the connector to be furnished with signal
contacts only (coax/power contacts purchased separately),
and the letter "P" specifies the connector to be furnished
with both signal and power contacts.
W - Size #12 and
#16 Contacts Are
Purchased Separately.
P
Shell
Size
- Connector Supplied
With All Contacts
Including Size 12
and SIze #16 Power
Contacts
F – 15
Total
Number
of Contact
Positions
W
2
M ICRO -C RIMP
Contact
Arrangement
#23
#16
#12
A
A-5
5
—
—
B-2P2
B-9
C-13
D-15
—
2
—
9
—
—
13
—
—
15
—
—
D-3P3
D-7P2
—
3
—
5
2
—
E-11P2
E-19
E-7P3
9
2
—
19
—
—
4
3
—
F-15P2
F-23
F-5P5
13
2
—
23
—
—
—
5
—
G-33
H-10P4
H-29P7
33
—
——
6
—
4
22
7
—
H-36P2
H-54P2
H-5P5
34
—
2
52
2
—
—
—
5
H-66
66
—
—
J-17P4
J-25P2
13
4
—
23
2
—
J-33
J-7P7
33
—
—
—
7
—
K-27P4
K-35P2
K-43
K-9P9
23
4
—
33
2
—
43
—
—
—
9
—
L
L-6P6
L-78
—
—
6
78
––
––
M
M-102
102
––
––
B
C
D
E
F
G
H
J
Number
of Power/
Coaxial
Contact
Positions
TM
Contact Quantity
Shell
Size
K
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-1
www.glenair.com
C
Series 79
General
Information
Series 79 Micro-Crimp General Information
Insert Arrangements
MICRO-CRIMP INSERT ARRANGEMENTS
Shell
Size
Contact
No. of Contacts and
Arrangement
Contact Size
Mating Face Pin Connector
(Socket Numbers are Reversed)
1
A
A-5
2
3
5 #23 CONTACTS
5
4
A2
A1
B
B-2P2
B-2W2
2 #16 CONTACTS
B
B-9
9 #23 CONTACTS
1
2
6
C
1
C
C-13
D-15
9
10
2
3
4
3 #16 CONTACTS
D
D-7P2
D-7W2
5 #23 CONTACTS
2 #16 CONTACTS
E-11P2
E-11W2
9 #23 CONTACTS
2 #16 CONTACTS
E-19
19 #23 CONTACTS
13 #23 CONTACTS
2 #16 CONTACTS
F-23
23 #23 CONTACTS
2
G-33
6
7
5
8
5 #16 CONTACTS
33 #23 CONTACTS
13
15
14
A3
3
12
13
5
2
4
A2
4
3
7
5
14 15
8
9
7
6
10
9
8
19
17 18
16
A2
A1
A2
A3
2
4
3
1
A1
7
2
3
2
9
8
4
14 15
5
2
3
4
3
4
10
11
6
12
8
6
A2
13
9
20 21
19
10
7
8
11
22
12
23
A5
A4
A3
5
6
5
7
17 18
16
A2
A1
1
G
13
2
6
3
1
13
F-5P5
F-5W5
1
5
1
F
1
A1
4 #23 CONTACTS
3 #16 CONTACTS
F-15P2
F-15W2
F
11 12
4
11
F
7
A2
A1
1
E-7P3
6
5
11 12
10
A1
D-3P3
D-3W3
E
9
15 #23 CONTACTS
D
E
8
4
3
8
9
E
7
5
13 #23 CONTACTS
1
D
2
4
3
9
10
11
12
13
23
24 25
26
27 28
29
30 31
32 33
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-2
Series 79
General
Information
Series 79 Micro-Crimp General Information
Insert Arrangements
MICRO-CRIMP INSERT ARRANGEMENTS
Shell
Size
Contact
No. of Contacts and
Arrangement
Contact Size
Mating Face Pin Connector
(Socket Numbers are Reversed)
1
H
H-10P4
H-10W4
6 #23 CONTACTS
4 #12 CONTACTS
H-29P7
22 #23 CONTACTS
7 #16 CONTACTS
A1
3
1
5
8
6
A2
34 #23 CONTACTS
2 #12 CONTACTS
52 #23 CONTACTS
2 #16 CONTACTS
2
3
H-5P5
H-5W5
H-66
A1
2
J-17P4
J-17W4
C
A7
8
17
3
21
22
A2
25
4
7
6
5
29 30
28
10
9
8
32 33
31
11
34
12
14
13
15
A2
27
28
39
42
A1
43
44 45 46
47 48 49
A3
A2
50
51
52
A5
A4
5 #12 CONTACTS
66 #23 CONTACTS
13 #23 CONTACTS
4 #16 CONTACTS
2
3
4
7
6
5
9
8
10
11
12
14 15
13
16
17
33
34
50
J
7
6
5
18
1
H
4
A6
9
40 41
H
A5
A4
20
19
16
A1
1
H-54P2
H-54W2
13
A3
17 18
15
14
12
10
26 27
H
11
9
7
4
1
H
5
6
A1
H-36P2
H-36W2
A4
A3
3
4
2
H
2
A2
49
51
A1
52 53
A2
54
55
56 57 58
59 60 61
1
2
5
8
4
3
9
10
11 12
6
7
62
63
A3
64 65
66
A4
13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-3
www.glenair.com
Series 79
General
Information
Series 79 Micro-Crimp General Information
Insert Arrangements
MICRO-CRIMP INSERT ARRANGEMENTS
Shell
Size
Contact
Arrangement
No. of Contacts
and Contact Size
J
J-25P2
J-25W2
23 #23 CONTACTS
2 #16 CONTACTS
J-33
33 #23 CONTACTS
Mating Face Pin Connector
(Socket Numbers are Reversed)
1
A1
13
1
J
2
J
J-7P7
J-7W7
7 #16 CONTACTS
K
K-27P4
K-27W4
23 #23 CONTACTS
4 #16 CONTACTS
K-35P2
K-35W2
33 #23 CONTACTS
2 #16 CONTACTS
K-43
43 #23 CONTACTS
K
2
9 #16 CONTACTS
L
L-6P6
L-6W6
6 #12 CONTACTS
2
20
4
5
6
3
24 25
26
14 15
1
3
4
22 23
8
9
10
11
12
13
7
29
7
11
12
13
32
33
34 35
A5
36
A6
10
16
16
17 18
19
37 38
39
40 41
A2
21 22
20
42
A8
A7
A9
16
17 18
19
20
L
L-78
78 #23 CONTACTS
39
40
59
1
58
60
61
62 63
64
65
2
3
4
6
7
5
66 67 68
8
9
10
69 70 71
11 12
13
72
73
14 15
74 75
16
76 77 78
17 18
19 20
41
21
M
M-102
102 #23 CONTACTS
61
42
82
62
83
43
A6
14 15
13
17
33
30 31
A5
11 12
A4
A3
32
29
A4
9
8
13
14 15
33
12
11
14 15
10
17
A7
12
27 28
30 31
7
10
32
23
26
11
10
16
21 22
24 25
A4
6
20
9
8
A3
5
19
14 15
A6
9
8
A2
30 31
29
A5
6
7
9
8
27 28
26
17 18
16
A2
2
21
5
23
A3
A1
20
A4
6
5
21 22
27 28
A2
19
24 25
4
12
11
18
7
3
10
9
8
17
A3
4
19
16
7
6
5
22 23
2
3
18
A1
K-9P9
K-9W9
21
1
1
A1
4
6
5
13
23
K
4
A2
A2
A1
3
14 15
20
A1
1
K
3
19
18
C
2
84
85
86 87
88
89
90 91 92
93 94 95
96
97
98 99 100 101
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-4
Series 79
General
Information
Series 79 Micro-Crimp General Information
Materials, Finishes, and Specifications
MATERIALS AND FINISHES
Size #23 contacts
Size #16 and #12 contacts
Insulators
Shell
Interfacial seal and grommet
Contact and insert retention clips
Jackposts and guide pins
EMI Shroud for right angle PCB
Trays for right angle PCB
Spring, EMI (plug)
Beryllium copper alloy, plated gold over nickel
Copper alloy
Liquid crystal polymer, 30% glass-reinforced
Aluminum alloy. See ordering info for finish options
Fluorosilicone
Beryllium copper, heat-treated, unplated
Stainless steel, passivated
Aluminum alloy
Thermoplastic
Stainless steel or beryllium copper alloy, gold plated
BASIC SPECIFICATIONS
Current rating
Voltage rating (DWV)
Insulation resistance
Operating temperature
Contact resistance
Water ingress protection
Contact size #23 5 Amps, size #16 13 Amps, size #12 23 Amps maximum
Contact size #23 500 VAC rms. Size #16 and #12 1800 VAC rms. Sea level.
5000 megohms minimum
-65° C. to +150° C.
5 milliohms maximum
IP67
>75 dB attenuation from 100 MHz to 1000MHz, >60dB 1GHz to 4GHz, >40dB
4GHz to 10GHz.
Shielding effectiveness
DESCRIPTION
Contact Resistance
DETAILED PERFORMANCE SPECIFICATIONS
REQUIREMENT
PROCEDURE
Max
Wire
Size
12
14
16
20
22
24
26
28
SAE AS39029 Table V
Wire
Size
16
20
22
24
26
28
Test Voltage
Current Drop
23
42
17
40
13
49
7.5
55
5
73
3
45
2
52
1.5
54
Low Level Contact
Resistance
Max.
Milliohms
5
9
15
20
31
50
Insulation Resistance
5000 megohms minimum
EIA-364-06
IEC 60512-2-1
Test current in amperes. Voltage drop
in millivolts. Silver-coated copper wire,
+25°C.
EIA-364-23
100 milliamperes maximum and 20
millivolts maximum open circuit voltage
EIA-364-21 / IEC-60512-3-1
500 volts DC ± 50 volts. Test between
adjacent contacts and contacts to shell.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-5
www.glenair.com
C
Series 79
General
Information
Series 79 Micro-Crimp General Information
Performance Specifications
DESCRIPTION
C
DETAILED PERFORMANCE SPECIFICATIONS
REQUIREMENT
PROCEDURE
Dielectric Withstanding
Voltage
No breakdown or flashover
EIA-364-20
IEC-60512-4-1
Sea level AC rms 50 or 60 Hz. One
minute dwell.
#23 contacts 500 volts
#16 contacts 1800 volts
#12 contacts 1800 volts
Current Carrying Capacity
EIA-364-70 Method 1
IEC-60512-5 Test 9b
Shell-to-shell Resistance
(connectors with ground
springs)
2.5 millivolt drop maximum
Shielding Effectiveness
Contact
Size
12
16
23
Max
Current
23
13
5
>75 dB attenuation from 100 MHz
to 1000MHz, >60dB 1GHz to 4GHz,
>40dB 4GHz to 10GHz.
EIA-364-83
IEC-60512-2-6
Electroless nickel plated connectors.
EIA-364-66
IEC-60512-23-3
Water Immersion
No evidence of water penetration into
mated connectors. No evidence of
water penetration into an unmated
panel mounted PCB receptacle. ≥ 100
MΩ insulation resistance.
MIL-STD-810F Method 512.4
1 meter immersion
1 hour
Ingress Protection
IP67 rating
IEC-60529
Vibration, Sine
No discontinuity of greater than 1
microseconds, no cracking, breaking
or loosening of parts, plug shall not
become disengaged from receptacle.
Connectors shall meet electrical
requirements after vibration test.
EIA-364-28 Test Condition IV
IEC-60512-6-4
100 milliamp test current
10- 2,000 Hz
20 g, 196 m/s2
Vibration, Random
No discontinuity of greater than 1
microseconds, no cracking, breaking
or loosening of parts, plug shall not
become disengaged from receptacle.
Connectors shall meet electrical
requirements after vibration test.
EIA-364-28 Test Condition VI Letter J
IEC-60512-6-4
100 milliamp test current
50- 2,000 Hz
43.92 g rms
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-6
Series 79
General
Information
Series 79 Micro-Crimp General Information
Performance Specifications
DESCRIPTION
DETAILED PERFORMANCE SPECIFICATIONS
REQUIREMENT
PROCEDURE
Mechanical Shock
No discontinuity of greater than 1
microsecond, no cracking, breaking
or loosening of parts, plug shall not
become disengaged from receptacle.
Connectors shall meet electrical
requirements after shock test.
EIA-364-27 Condition D
IEC-60512-6-3
3 shocks X 3 axes X 2 directions = 18
shocks 2941 m/s2 (300 g’s), 3 ms, halfsine
Thermal Shock
No mechanical damage or loosening
of parts. Following thermal shock,
connector shall meet contact
resistance, DWV, insulation
resistance and shell-to-shell
resistance requirements.
EIA-364-32 Test Condition IV
IEC-60512-11-4
5 cycles consisting of -65° C 30 minutes,
+25° C 5 minutes max., +150° C 30
minutes, +25° C 5 minutes max.
Humidity, Cyclic (Damp
Heat, Cyclic) (Moisture
Resistance)
No deterioration which will adversely
affect the connector. 100 megohms
minimum insulation resistance during
the final cycle. Following the recovery
period, connectors shall meet contact
resistance, shell-to-shell resistance
and DWV requirements.
EIA-364-31 Condition B Method III
IEC-60512-11-12
80-98% RH
10 cycles (10 days)
+25° C to +65° C
Step 7b vibration deleted.
24 hour recovery period.
Mechanical Durability, at
Ambient Temperature
No deterioration which will adversely
affect the connector after 2000 cycles
of mating and unmating. Connectors
shall meet contact resistance,
insulation resistance, shell-to-shell
resistance, DWV, and mating and
unmating force.
EIA-364-09
IEC-60512-5 Test 9a
Corrosion (Salt Mist)
No exposure of base metal.
Connectors shall meet DWV and
contact resistance requirements
following the test.
EIA-364-26
IEC 60512-11-6
5% salt solution
35° C
Unmated connectors
Code MT: Ni-PTFE 500 hours
Code M: electroless nickel 48 hours
Code NF: Cadmium 500 hours
Code ZNU: Black zinc nickel 500 hours
Solderability, PC Tail
Contacts
95% solder coverage. Smooth, bright
and even finish.
EIA-364-52 Category 3
IEC-60512-12-1
IEC-68-2-20 Test Ta, method 1
8 hours steam aging prior to test
245° C
4-5 sec. dwell
10X magnification
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-7
www.glenair.com
C
Series 79
General
Information
Series 79 Micro-Crimp General Information
Performance Specifications
DESCRIPTION
C
DETAILED PERFORMANCE SPECIFICATIONS
REQUIREMENT
PROCEDURE
Resistance To Soldering
Heat
No damage to connector. Connectors
shall meet insulation resistance and
waterproof sealing requirements.
EIA-364-56
IEC-60512-12-5 Test 12e
260° C, 10 seconds (PC tail)
Impact, Cable Connectors
No impairment of function. Connector
shall meet contact resistance,
insulation resistance and waterproof
sealing.
EIA-364-42
IEC-60512-5 test 7b
1 meter
8 drops
Fluid Immersion
No damage from immersion in various
fuels and oils. Connector shall meet
mating/unmating force and dielectric
withstanding voltage.
EIA-364-10
Altitude Immersion
No evidence of moisture on connector
interface or contacts. Connector shall
meet dielectric withstanding voltage.
EIA-364-03
Wired connectors with supplemental
potting.
Contact Retention
Contact Min.
Size Pounds
23
6
20
15
16
25
12
25
Min.
Newtons
27
67
111
111
EIA-364-29
Contact Separation Force
Contact Min.
Size Ounces
23
0.5
20
0.7
16
2.0
12
3.0
Min.
Newtons
0.14
0.19
0.56
0.83
SAE AS39029
Mating and Unmating Force Maximum mating/unmating force: (6
pounds) + (# of size 23 contacts X .40)
+ (# of size 12 or #16 contacts X 1.8)
EIA-364-13
Magnetic Permeability
EIA-364-54
2 μ maximum.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-8
Series 79
General
Information
Series 79 Micro-Crimp General Information
Shell Plating Options
About Series 79 Micro-Crimp Shell Plating Options
Micro-D connector shells are made of aluminum alloy and are
coated to improve corrosion resistance. Electroless nickel plating
is used for instrumentation, avionics and space applications where
corrosion protection is not critical. Cadmium plating provides superior
corrosion protection, but the United States Department of Defence
(DOD)has mandated the elimination of cadmium from DOD weapons
systems because of toxicity concerns. The European Union has also
restricted the use of cadmium on electronics equipment (RoHS).
Glenair’s 1000 Hour Grey™ nickel-PTFE plating meets the need
for a high-performance cadmium replacement with excellent corrosion
resistance, durability and excellent conductivity. In this catalog you will find three standard shell coatings:
electroless nickel, Nickel-PTFE and black zinc-nickel. The table below shows additional plating options
that are also available on any Series 79 Micro-Crimp connector.
MICRO-CRIMP SHELL PLATING CODES
Shell Plating
Compatible
Hexavalent
Salt
with EMI
Plating Fog* Cadmium Chromium
Spring
Free
Conductivity
Free
Code (Hours)
Typical Applications
M
48
Yes
Yes
Excellent
Yes
Space vehicles, missiles,
avionics, unmanned vehicles,
instrumentation
Nickel-PTFE
MT
500
Yes
Yes
Excellent
Yes
Harsh environment, soldier
systems, communications
equipment
Zinc-Nickel with
Olive-Drab Chromate
ZN
500
Yes
No
Good
No
Harsh environment, soldier
systems, unmanned and
manned vehicles
ZNU
500
Yes
No
Good
No
Harsh environment, soldier
systems, unmanned and
manned vehicles
Cadmium with
Olive-Drab Chromate
N
500
No
No
Excellent
No
Harsh environment, military
equipment
Cadmium with
Yellow Chromate
J
500
No
No
Excellent
No
General purpose military
equipment
Black Anodize
C
336
Yes
Yes
NonConductive
N/A
Applications where EMI
shielding is not required
Gold
Z2
48
Yes
Yes
Excellent
Yes
Space
Chem Film
E
48
Yes
No
Excellent
Yes
Avionics
Electroless Nickel
Zinc-Nickel with
Black Chromate
* Salt spray test in accordance with ASTM B117
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-9
www.glenair.com
C
Series 79
General
Information
Series 79 Micro-Crimp General Information
Micro-Crimp Connectors for Space Flight
Series 79 Micro-Crimp Connectors for Space Flight
Micro-D connectors are a popular choice for space flight. Their
small size and reduced weight, combined with excellent shock
and vibration performance, has led to their widespread use on
space vehicles. The Micro-Crimp connector brings the benefits of
a crimp, rear-release contact system to the Glenair Micro-D family.
Connectors can be terminated onto complicated, multi-branch
wiring harnesses without splicing or soldering.
C
Five things you should
know about Series 79
connectors for space flight
1
Material Selection: What
materials are approved
for space-grade connectors?
What materials are prohibited?
Does the Series 79 connector
contain space-approved
materials?
2
Outgassing: What is
outgassing, why is it
important, and how does it affect
connector selection? Is special
processing required to meet
outgassing requirements?
3
Screening: What is NASA
screening and what level of
screening is required?
4
Magnetic permeability: Are
nonmagnetic connectors
required?
5
Cryogenic exposure: Are
these connectors suitable
for -200° C. exposure?
M ICRO -C RIMP
how to order space grade series 79 connectors
Step 1: Find a Standard Part Number
Electroless nickel plated shells are preferred for space flight. Cadmium plating is
prohibited.
Step 2: Select a NASA Screening Level
The term “Screening Level” refers to the final inspection procedure.
Level 1 for mission-critical highest reliability
Level 2 for high reliability
Level 3 for standard reliability
Step 3: Choose Outgassing Processing
A detailed explanation of outgassing is on the following pages. The fluorosilicone
rubber seals commonly used on aerospace-grade connectors such as MILDTL-38999 and Series 79 connectors, along with certain bonding agents and inks,
do not meet NASA outgassing requirements unless the connector is specially
processed. Glenair outgassing tests have shown oven baking or thermal vacuum
outgassing processing are sufficient to reduce outgassing levels to NASA
standards. Oven baking is more economical than thermal vacuum outgassing.
Step 4: Select the Mod 429 Code that Matches the Desired
Level of Screening and Outgassing
Use the following table to choose the right modification code. Add the mod code to
the connector part number. Example: 790-024PC-13ML-429C
nasa screening levels and modification codes
Special Screening
Only
NASA Screening
Level
Level 1 Highest
Reliability
TM
Level 2 High Reliability
Level 3 Standard
Reliability
Special Screening Plus Outgassing
Processing
Interfacial
Seal is
Installed
Interfacial
Seal is
Deleted
48 Hour Oven
Bake
175° C.
Thermal Vacuum
Outgassing
24 hrs. 125° C.
Mod 429B
Mod 429F
Mod 429J
Mod 429
Mod 429D
Mod 429K
Mod 429A
(Use standard
part no.)
Mod 432
Mod 186
Mod 186M
Mod 429C
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-10
Series 79
General
Information
Series 79 Micro-Crimp General Information
Micro-Crimp Connectors for Space Flight
Specifying Micro-Crimp Connectors for Space Flight
1
Material Selection: What
materials are approved for
space flight? What materials
are restricted? How to choose
the right materials for Series 79
Micro-Crimp connectors.
What materials are approved for
space flight?
Section C2 “Connectors and Contacts”
of NASA EEE-INST-002 provides
guidelines for materials used in
connectors for space flight applications.
Aluminum is a preferred material for
connector components, and electroless
nickel is the preferred finish. Beryllium
copper is a preferred material for
contacts. 50 microinch minimum gold
plating is the preferred contact finish.
LCP is a preferred material for dielectric
insulating materials.
What materials are prohibited?
100% tin plating shall not be used. Pure
tin can grow “whiskers” which can lead
to catastrophic electrical short circuits.
Silver plating is prohibited because
of corrosion concerns. Cadmium is
prohibited because it is unstable in
vacuum environments.
Specifying Series 79 connectors for
space flight
Standard Series 79 connectors meet
NASA guidelines for material selection.
Specify “M” for aluminum shells with
electroless nickel finish. The table below
lists Series 79 materials.
SERIES 79 CONNECTOR MATERIALS APPROVED FOR SPACE FLIGHT
Component
Material
Notes
Shells
Aluminum alloy 6061 per ASTM B211, electroless nickel
plated
Approved for Space Flight
Rigid Insulators
Glass-filled liquid crystal polymer (LCP) in accordance with
MIL-M-24519, Type GLP-30F
Approved for Space Flight
Retention Clips
Beryllium copper, heat-treated, unplated
Approved for Space Flight
Grommet, Interfacial Seal
Blended fluorosilicone/silicone elastomer, 30% silicone per
ZZ-R-765, 70% fluorosilicone per MIL-R-25988
Requires outgassing
processing
Pin Contact
Beryllium copper alloy per ASTM B197, 50 microinches gold
plated per ASTM B488 Type 3 Code C Class 1,27 over nickel
plate per QQ-N-290 Class 2, 50-100 microinches
Approved for Space Flight
Socket Contact
Beryllium copper alloy per ASTM B197, 50 microinches gold
plated per ASTM B488 Type 3 Code C Class 1,27 over nickel
plate per QQ-N-290 Class 2, 50-100 microinches.
Approved for Space Flight
Socket Contact Hood
Stainless steel, passivated per AMS-QQ-P-35
Approved for Space Flight
Adhesives
RTV and epoxies (see following table for outgassing info)
Requires outgassing
processing
Potting Compound, PCB
and Solder Cup Versions
Environmental and Hermetic Connectors: Stycast 2651/Catalyst 9
epoxy encapsulant. Filter Connectors: Stycast 2850FT/Catalyst 11
thermally conductive epoxy encapsulant.
Approved for Space Flight
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-11
www.glenair.com
C
Series 79
General
Information
Series 79 Micro-Crimp General Information
Micro-Crimp Connectors for Space Flight
Specifying Micro-Crimp Connectors for Space Flight
2
Outgassing: What is
outgassing and how does
it affect connector selection? Is
special processing required to
meet outgassing requirements?
C
What is outgassing?
Plastic and rubber materials give off
gaseous molecules. For example,
the smell inside a new car is caused
by polymer outgassing. Heat and
vacuum increase the rate of diffusion.
In a spacecraft the gases coming off
polymers can contaminate optical
surfaces and instruments. The result is
degraded performance.
How is outgassing measured?
The space industry has adopted a
standardized test procedure, ASTM
E 595, to evaluate out-gassing
properties of polymers. Small samples
of material are heated to 125° C. at a
vacuum of 5 X 10-5 torr for 24 hours.
Then the sample is weighed to
calculate the Total Mass Loss (TML).
The TML cannot exceed 1.00% of
the total initial mass. During the test,
outgassed matter condenses on a
cooled collector plate. The quantity
of outgassed matter is caluclated to
determine the Collected Volatile
Condensable Material (CVCM). The
CVCM cannot exceed 0.10% of the
original specimen mass.
Is special outgassing processing
necessary on Series 79 connectors?
NASA states “A bakeout for
outgassing control is driven by the
application and may be required
where tight contamination control
must be maintained.” NASA generally
recommends that connectors
undergo outgassing processing. This
processing can be performed by
Glenair; however, some customers
prefer to fabricate higher level
subassemblies before outgassing
processing is performed.
Outgassing At-a-Glance
• Fluorosilicone rubber
components used in MicroCrimp connectors, such
as o-rings, grommets and
seals already exceed NASA
outgassing limits.
• NASA nevertheless
recommends additional
processing to reduce
outgassing of all materials to
minimal levels.
• An inexpensive oven
bakeout delivers excellent
results compared to thermal
vacuum outgassing. The
high temperature of the oven
bakeout effectively removes
volatile materials.
• Glenair 429 mod codes provide
easy ordering, whichever
outgassing option is required.
OUTGASSING PROPERTIES OF MATERIALS USED IN SERIES 79 CONNECTORS
Component
TML
%
Material
Front and Rear Insulator, right
Liquid Crystal Polymer Vectra C130
angle PCB Trays
Rear Grommet
Interfacial Seal
Front-To-Rear Insulator
Bonding Material
Insulator-to-Rubber Bonding
Material
PCB Trays (Machined Ultem)
White Epoxy Ink for
Silkscreening
Potting Compound, PC Tail
Connectors
Panel Gasket
TCVML %
Test Reference
0.03
0.0
NASA Test # GSC17478
Blended flourosilicone/silicone elastomer,
30% silicone per ZZ-R-765, 70%
flourosilicone per MIL-R-25988
0.48
0.14
Glenair testing conducted
at NuSil Technology
02/27/2001
Eccobond 104 A/B
0.52
0.08
Emerson & Cuming Data
Sheet
0.90
NASA Test GSFC0191
DC3145 RTV, per MIL-A-46146
1.74
Polyetherimide, Ultem 2300
0.43
0.01
NASA Test GSC19820
Markem 7224 White
0.49
0.03
NASA Test #GSC19899
Hysol C9-4215
0.48
0.01
Glenair Test
Silver-filled Fruorosilicone, Cho-Seal 1287
0.63
0.03
NASA test GSC15165
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-12
Series 79
General
Information
Series 79 Micro-Crimp General Information
Micro-Crimp Connectors for Space Flight
Series 79 Micro-Crimp Connectors for Space Flight
3
Screening:
What is NASA screening
and what level of screening is
required?
What is NASA screening?
NASA specification EEE-INST-002
provides instructions on selecting,
screening and qualifying parts for use
on NASA GSFC space flight projects.
Table 2C in the NASA specification
contains inspection instructions for
MIL-DTL-83513 Micro-D connectors.
Series 79 connectors are similar to
M83513 connectors, so Table 2C
applies by similarity to Series 79
connectors.
What screening level is required?
NASA defines three levels of
screening: level 1 for highest reliability,
level 2 for high reliability, and level 3
for standard reliability. Level 3 equates
to standard lot acceptance inspection.
Levels 1 and 2 call for additional
testing.
What about qualification
requirements?
Projects using connectors covered
by military specifications are typically
able to waive qualification testing. The
Series 79 connector is not covered
by a military specification. Projects
considering using the Series 79 for
space flight should obtain guidance
from the overseeing space agency
regarding the suitability of this
connector and any testing that might be
recommended.
NASA EEE-INST-002 SCREENING REQUIREMENTS
Inspection/ Test
Visual Inspection
Mechanical
Voltage (DWV)
Insulation Resistance
Mating and Unmating Force
Contact Engagement and Separation Force
Air leakage (Hermetic connectors only)
Solderability/Resistance to Soldering Heat
NASA Level 1 NASA Level 2
100%
100%
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
N/A
2 pcs.
N/A
100%
100%
2 pcs.
N/A
1. NASA screening requirements from Table 2 of EEE-INST-002 Screening Requirements.
4
Magnetic Permeability:
Are nonmagnetic
connectors required?
What about ferromagnetic materials?
Spacecraft designers generally avoid
the use of ferromagnetic materials,
which can become magnetized and
can interfere with sensitive instruments. Series 79 environmental connectors have a maximum permeability
of 2 mu.
5
Cryogenic exposure:
Space programs sometimes
need cryogenic connectors
capable of withstanding
temperatures as low as -270°
C. Can Series 79 connectors
operate satisfactorily at this
temperature?
What about low temperature ranges?
Series 79 connectors are rated to
-65° C. Glenair does not have data
to validate these connectors for
cryogenic applications. EEE-INST-002
states “...experience has proven it is
possible for (non-certified) connector
types to be used successfully
at cryogenic temperatures. It is
recommended that connector samples
should be subjected to five cycles of
cryogenic temperature...(followed by
examination for cracks and DWV)”.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-13
www.glenair.com
C
Series 79
General
Information
Series 79 Micro-Crimp General Information
Recommended Panel Cut-Outs
Series 79 Micro-Crimp Recommended Panel Cut-Outs
ALL CUTOUTS FOR .063” (.070 MAX) THICK PANEL MOUNTING
.925
.565±.002
-A-
.180
.396
(.198)
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
30°
2X
.286
R.107±.002
4X
(.157)
.696
2X R.090±.003
BLEND RADIUS INTO SLOT
.180
SLOT 2X
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
(.473)
1.475
1.115±.002
-A.946
.836
30°
2X
.686
.180
SLOT 2X
Shell Size D
R.107±.002
4X
(.157)
1.625
1.265±.002
-A-
.180
(.548)
.314
-B-
2X R.090±.003
BLEND RADIUS INTO SLOT
.180
SLOT 2X
R.107±.002
4X
(.157)
1.096
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
.314
-B-
30°
2X R.090±.003
BLEND RADIUS INTO SLOT 2X
R.107±.002
4X
(.157)
.314
-B-
Shell Size C
.180
.180
SLOT 2X
.796
(.398)
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
.314
-B-
.586
.436
.965± .002
-A-
.180
(.348)
2X R.090±.003
30°
BLEND RADIUS INTO SLOT 2X
30°
2X
1.325
1.225
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
.314
-B-
Shell Size B
.865±.002
-A-
.180
(.273)
2X R.090±.003
BLEND RADIUS INTO SLOT
Shell Size A
(.157)
.546
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
.180
SLOT 2X
R.107±.002
4X
.715±.002
-A-
.180
.314
-B-
2X R.090±.003
BLEND RADIUS INTO SLOT
C
1.075
R.107±.002
4X
(.157)
Shell Size E
30°
2X
.986
.180
SLOT 2X
Shell Size F
1.575
1.215±.002 -A1.086
(.543)
.180
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
2X R.090±.003
BLEND RADIUS INTO SLOT
R.107±.002
4X
(.203)
.406
-B30°
2X
.906
.180
SLOT 2X
Shell Size G
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
C-14
Series 79
General
Information
Series 79 Micro-Crimp General Information
Recommended Panel Cut-Outs
Series 79 Micro-Crimp Recommended Panel Cut-Outs
ALL CUTOUTS FOR .063” (.070 MAX) THICK PANEL MOUNTING
2.236
2X R.100±.002
.003 M A M B M
1.800
1.460±.003 -A-
30°
2X
.129 2X
.218
.170
ø.120±.003 THRU
C-SINK 82° @ ø.215
2X
.003 M A M B M
.420
R.100±
.002 4X
2X ø.210±.003
.003 M A M B M
Shell Size H
1.975
.180
1.448
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
C
R.107±.002
4X
(.157)
1.615±.002
-A(.724)
.314
-B-
2X R.090±.003
BLEND RADIUS INTO SLOT
30°
2X
.180
SLOT 2X
1.345
Shell Size J
2.375
2.015±.002
-A-
.180
R.107±.002
4X
(.157)
1.848
(.924)
ø.089±.002
C-SINK 82° @ ø.177
2X
.003 M A M B M
2X R.090±.003
BLEND RADIUS INTO SLOT
.314
-B30°
2X
1.740
.180
SLOT 2X
Shell Size K
2.472
2X R.100±.002
.003 M A M B M
2.036
.166 2X
30°
2X
1.696±.003 -A-
.218
.170
.420
2X ø.210±.003
.003 M A M B M
Shell Size L
R.100±
.002 4X
ø.120±.003 THRU
C-SINK 82° @ ø.215
2X
.003 M A M B M
2.770
2X R.100±.002
.003 M A M B M
2.200
2X .156
2X
30°
1.760±.003 -A-
.285
.220
.480±.003
-B4X R.100±.002
2X ø.236±.003
.003 M A M B M
Shell Size M
2Xø.146 THRU
C-SINK 82° @ ø.275
2X
.003 M A M B M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
C-15
www.glenair.com
SERIES 79
MICRO-CRIMP
CRIMP
TERMINATED
CABLE
CONNECTORS
T
oday’s aerospace and defense systems require advanced levels of environmental protection, electromagnetic
shielding and size/weight reduction. The Series 79 Micro-Crimp features a precision D-shaped shell, ideal for highdensity applications such as modular avionic boxes or low-profile tactical computers where traditional circular
connectors cannot be used. Crimp terminated cable connectors are designed for I/O and wire-to-wire interconnections
and feature machined aluminum shells, fluorosilicone face seals and wire grommets for environmental protection.
Contacts are rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged separately. Size #23
signal pins accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG
wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. Connector shell features a groove for
attachment of a low-profile EMI backshell adapter.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497
• Tel: 818-247-6000 • Email: sales@glenair.com • www.glenair.com
www.glenair.com
Series 79
Cable
Connectors
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
How To Order
790-024P Cable Receptacles
PIN CONTACTS WITH CRIMP TERMINATION
Rugged, lightweight 790-024P connectors feature machined aluminum
shells, fluorosilicone face seals and wire grommets for environmental
protection. Contacts are rear-release snap-in crimp type. Connectors are
supplied with crimp contacts packaged separately. Size #23 signal pins
accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire.
Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also
accept coaxial contacts purchased separately. Connector shell features
a groove for attachment of a low-profile EMI backshell adapter 799-015,
ordered separately.
HOW TO ORDER
Sample Part Number
790-024P
C-13
M
P
Base Part
Number
Shell Size Insert
Arrangements
Shell Finish
Hardware Option
790-024P
Cable Receptacle
with Pin Contacts
See Table 1 for
Available Insert
Arrangements.
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
Example:
36P2 is supplied with 2
power pins.
36W2 is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
D
M
Electroless Nickel
general purpose
applications
N
Thru-Hole
No Hardware
MT
Nickel-PTFE
P
Female Jackpost
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
L
ZNU
Zinc-Nickel with Black
Chromate
Low-Profile Captivated
Jackscrew, Hex Head
K
Slot-Head Extended
Jackscrew
tactical applications
(non-reflective black)
Additional shell
finishes are listed on
page C-9.
S
Low-Profile Captivated
Screwlock, Hex Head
SPECIFICATIONS
T
Slot-Head Extended
Captivated Screwlock
MATERIALS AND FINISHES
Current Rating
#23 5 AMPS, #16 13 A., #12 23 A.
Shell
Aluminum alloy
Dielectric Withstanding
Voltage
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
Contacts
Copper alloy, 50 microinches gold
plated
Insulation Resistance
Operating Temperature
Shock
Vibration
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Insulators
Retention Clips
Interfacial Seal, Grommet
Hardware
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
D-1
www.glenair.com
Series 79
Cable
Connectors
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
How To Order
Table I Contact Arrangements
Contact
Quantity
Layout
A-5
#23 #16 #12
5
B-9
9
C-13
13
D-15
15
REAR INSULATOR
GROMMET
POTTING
RETAINING CLIP
INTERFACIAL SEAL
WIRE (REF.)
2
B-2P2
Face View
CROSS-SECTIONAL VIEW OF 790-024P
PIN CONTACT
FRONT INSULATOR
GROOVE FOR
EMI ADAPTER
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
SHELL
TABLE 2 HARDWARE OPTION
.190 (4.83)
MAX
3
F-15P2 13 2
D
F-23
23
5
F-5P5
G-33
33
H-10P4
6
4
N
P
No Mating Hardware
Jackposts
Connector is supplied with thru-holes. Shell
sizes H and L are .148" (3.76) diameter, other
shell sizes are .092" (2.34) diameter. Accepts
standard Micro-D M83513 hardware.
.155
(3.94)
MAX
H-29P7 22 7
H-36P2 34
Connector is supplied with removable
jackposts. Shell sizes H and L have #4-40
UNC thread, other sizes have #2-56 thread.
Stainless steel. Conforms to M83513/05.
.925
(23.50)
MAX
2
H-54P2 52 2
5
H-5P5
H-66
66
K
Extended Jackscrews
Connector is supplied with stainless steel
non-removable low profile jackscrews. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread.
J-17P4 13 4
J-25P2 23 2
J-33
L
Hex Head Jackscrews
Connector is supplied with stainless steel slot
head non-removable jackscrews. Shell sizes
H and L have #4-40 UNC thread, other sizes
have #2-56 thread.
33
7
J-7P7
.925
(23.50)
MAX
.290 (7.37)
MAX
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
S
T
Hex Head Screwlocks
Extended Screwlocks
Connector is supplied with stainless steel
non-removable low profile screwlocks. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread. Screwlocks allow
the connector to be mated before the screws
are fastened.
Connector is supplied with stainless steel
non-removable slot head screwlocks. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread. Screwlocks allow
the connector to be mated before the screws
are fastened.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-2
Series 79
Cable
Connectors
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
Dimensions
790-024P Cable Receptacle Dimensions
CRIMP TERMINATION
1.435
MAX
1.435(36.45)
(1.80) MAX
A MAX
B BASIC
C MAX
1.215 (30.86) BASIC
1.079 (27.41) MAX
.395
(10.03)
MAX
.308 (7.82) MAX
.096/.088 (2.44/2.24)
DIA 2 PLACES
.096/.088 (2.44/2.24)
DIA 2 PLACES
.195 ± .003
(4.95 ± 0.08)
.195 ± .003
(4.95 ± 0.08)
.760 (19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
GROOVE FOR
ATTACHMENT OF
EMI ADAPTER
799-015
.760
(19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
1.055 (26.80)
MAX
D MAX
SHELL SIZE G
D
2.575
(65.41)
MAX
SHELL SIZES A, B, C, D, E, F, J, K
2.200
E MAX
F BASIC
G MAX
( 55.88 )
1.745
(44.32)
MAX
.410 (10.41)
MAX
.195 ± .003
(4.95 ± 0.08)
.152/.145 (3.86/3.68)
DIA 2 PLACES
.470
(11.94)
MAX
.195±.003
(4.95±0.08)
.148/.140
(3.76/3.56)
DIA 2 PLACE
.760 (19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
.760
(19.30)
MAX
.093±.005
(2.36±0.13)
H MAX
1.740
(44.20)
MAX
SHELL SIZE H AND L
SHELL SIZE M
790-024P DIMENSIONS
Shell
Size
A
B
C
D
E
F
H
J
K
L
A Max.
In.
.785
.935
1.085
1.185
1.335
1.485
—
1.845
2.240
—
mm.
19.94
23.75
27.65
30.10
33.91
37.72
—
46.86
56.90
—
B Basic
In .
.565
.715
.865
.965
1.115
1.265
—
1.615
2.015
—
mm.
14.35
18.16
21.97
24.51
28.32
32.13
—
41.02
51.18
—
C Max.
In.
.400
.551
.701
.801
.951
1.101
—
1.460
1.860
—
mm.
10.16
14.00
17.81
20.35
24.16
27.96
—
37.08
47.24
—
D Max.
In.
.390
.540
.690
.790
.940
1.090
—
1.450
1.840
—
mm.
9.91
13.72
17.53
20.07
23.88
27.69
—
36.83
46.74
—
E Max.
In.
—
—
—
—
—
—
2.175
—
—
2.420
mm.
—
—
—
—
—
—
55.25
—
—
61.47
F Basic
In.
—
—
—
—
—
—
1.800
—
—
2.036
mm.
—
—
—
—
—
—
45.72
—
—
51.71
G Max.
In.
—
—
—
—
—
—
1.450
—
—
1.686
mm.
—
—
—
—
—
—
36.83
—
—
42.82
H Max.
In.
—
—
—
—
—
—
1.440
—
—
1.675
mm.
—
—
—
—
—
—
36.58
—
—
42.55
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
D-3
www.glenair.com
Series 79
Cable
Connectors
790-025S
Crimp Terminated Cable Plug Connector,
Socket Contacts
How To Order
790-025S Cable Plugs
SOCKET CONTACTS WITH CRIMP TERMINATION
790-025S connectors feature machined aluminum shells and wire
grommets for environmental protection. Contacts are rear-release
snap-in crimp type. Connectors are supplied with crimp contacts
packaged separately. Size #23 signal pins accept up to #22 AWG
wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts
accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial
contacts purchased separately. Connector shell features a groove for
attachment of a low-profile EMI adapter 799-015, ordered separately.
HOW TO ORDER
D
Sample Part Number
790-025S
H-5P5
E
Part Number
Shell Size Insert
Arrangement
EMI Spring
790-025S
Cable Plug With
Socket Contacts
See Table 1 for
Available Insert
Arrangements
E
Hardware Option
general purpose
applications
N
Example:
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
See Section
B for coaxial
contacts purchased
separately.
Shell Finish
Electroless Nickel
No Spring
36W2 is supplied
less the power pins.
S
M
EMI Spring
To order a
connector without
size #16 or #12
power pins,
substitute “W”
instead of “P” in the
insert arrangement.
36P2 is supplied
with 2 power pins.
M
N
MT
Thru-Hole
No Hardware
Nickel-PTFE
EMI Spring
1000 Hour Grey™
maximum corrosion
protection and
durability
(non-reflective grey)
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
Additional shell
finishes are listed on
page C-9.
SPECIFICATIONS
L
Low-Profile Captivated
Jackscrew, Hex Head
S
Low-Profile Captivated
Screwlock, Hex Head
P
Female Jackpost
K
Slot-Head Extended
Jackscrew
T
Slot-Head Extended
Captivated Screwlock
MATERIALS AND FINISHES
Current Rating
#23 5 AMPS, #16 13 A., #12 23 A.
Shell
Aluminum alloy
Dielectric Withstanding
Voltage
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
Contacts
Copper alloy, 50 microinches gold
plated, stainless steel hood
Insulation Resistance
Operating Temperature
Shock
Vibration
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Insulators
Retention Clips
Grommet
Hardware
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-4
Series 79
Cable
Connectors
790-025S
Crimp Terminated Cable Plug Connector,
Socket Contacts
How To Order
Table I Contact Arrangements
Contact
Quantity
Layout
A-5
B-2P2
B-9
C-13
D-15
D-3P3
D-7P2
E-11P2
E-19
E-7P3
F-15P2
F-23
F-5P5
#23 #16 #12
5
Face View
CROSS-SECTIONAL VIEW OF 790-025S
2
WIRE (REF.)
9
13
FRONT INSULATOR
15
3
5
2
9
2
4
SHELL
GROOVE FOR
EMI ADAPTER
19
TABLE 2 HARDWARE OPTION
3
.190 (4.83)
MAX
13 2
23
5
G-33
33
H-10P4
6
N
H-36P2 34
No Mating Hardware
Jackposts
2
Connector is supplied with thru-holes. Shell
sizes H and L are .148" (3.76) diameter, other shell
sizes are .092" (2.34) diameter. Accepts standard
Micro-D M83513 hardware.
Connector is supplied with removable jackposts.
Shell sizes H and L have #4-40 UNC thread,
other sizes have #2-56 thread. Stainless steel.
Conforms to M83513/05.
H-54P2 52 2
.155
(3.94)
MAX
5
H-5P5
D
P
4
H-29P7 22 7
H-66
RETAINING CLIP
EMI SPRING
CONTACT SOCKET
REAR INSULATOR
GROMMET
POTTING
.925
(23.5)
MAX
66
J-17P4 13 4
J-25P2 23 2
J-33
33
K
Extended Jackscrews
Connector is supplied with stainless steel nonremovable low profile jackscrews. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread.
7
J-7P7
L
Hex Head Jackscrews
Connector is supplied with stainless steel slot
head non-removable jackscrews. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread.
K-27P4 23 4
K-35P2 33 2
K-43
.925
(23.50)
MAX
.290 (7.37)
MAX
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
S
T
Hex Head Screwlocks
Extended Screwlocks
Connector is supplied with stainless steel nonremovable low profile screwlocks. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread. Screwlocks allow the connector to
be mated before the screws are fastened.
Connector is supplied with stainless steel nonremovable slot head screwlocks. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread. Screwlocks allow the connector to
be mated before the screws are fastened.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
D-5
www.glenair.com
Series 79
Cable
Connectors
790-025S
Crimp Terminated Cable Plug Connector,
Socket Contacts
Dimensions
790-025S Dimensions
E MAX
F BASIC
A MAX
B BASIC
C MAX
G MAX
.410 (10.41)
MAX
.308 (7.82) MAX
.096/.088 (2.44/2.24)
DIA 2 PLACES
.152/.145 (3.86/3.68)
DIA 2 PLACES
.183 ± .003
(4.65 ± 0.08)
.183 ± .003
(4.65 ± 0.08)
.760 (19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
GROOVE FOR
ATTACHMENT OF
EMI ADAPTER
799-015
D
.760 (19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
H MAX
D MAX
SHELL SIZE H AND L
2.575
(65.41)
MAX
SHELL SIZES A, B, C, D, E, F, J, K
2.200
( 55.88 )
1.675
(42.55)
MAX
MAX
1.435 (36.45)
(1.80) MAX
1.215 (30.86) BASIC
1.010 (25.65) MAX
.407
(10.34)
MAX.
.395
(10.03)
MAX
.183±.003
(4.65±0.08)
.096/.088 (2.44/2.24)
DIA 2 PLACES
.470
(11.94)
MAX
.148/.140
(3.76/3.56)
DIA 2 PLACES
.183 ± .003
(4.65 ± 0.08)
.760
(19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
.760
(10.41)
MAX
.093±.005
(2.36±0.13)
1.740
(44.20)
MAX
1.055 (26.80)
MAX
SHELL SIZE G
SHELL SIZE M
790-025S DIMENSIONS
Shell
Size
A
B
C
D
E
F
H
J
K
L
A Max.
In.
mm.
.785 19.94
.935 23.75
1.085 27.56
1.185 30.10
1.335 33.91
1.485 37.72
—
—
1.845 46.86
2.240 56.90
—
—
B Basic
In .
mm.
.565 14.35
.715 18.16
.865 21.97
.965 24.51
1.115 28.32
1.265 32.13
—
—
1.615 41.02
2.015 51.18
—
—
C Max.
In.
mm.
.335
8.51
.485 12.32
.635 16.13
.735 18.67
.885 22.48
1.035 26.29
—
—
1.390 35.61
1.795 45.59
—
—
D Max.
In.
mm.
.390
9.91
.540 13.72
.690 17.53
.790 20.07
.940 23.88
1.090 27.69
—
—
1.450 36.83
1.840 46.74
—
—
E Max.
In.
mm.
—
—
—
—
—
—
—
—
—
—
—
—
2.175 55.25
—
—
—
—
2.420 61.47
F Basic
In.
mm.
—
—
—
—
—
—
—
—
—
—
—
—
1.800 45.72
—
—
—
—
2.036 51.71
G Max.
In.
mm.
—
—
—
—
—
—
—
—
—
—
—
—
1.385 35.18
—
—
—
—
1.623 41.22
H Max.
In.
mm.
—
—
—
—
—
—
—
—
—
—
—
—
1.440 36.58
—
—
—
—
1.675 42.55
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-6
Series 79
Panel Mount
Connectors
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
How To Order
790-026P Panel Mount Receptacles
PIN CONTACTS WITH CRIMP TERMINATION
790-026P connectors are designed for rear-panel mounting and are
supplied with conductive panel gaskets. These connectors feature
machined aluminum shells, fluorosilicone face seals and wire grommets
for environmental protection. Contacts are rear-release snap-in crimp
type. Connectors are supplied with crimp contacts packaged separately.
Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts
accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG
wire. Size 12 and 16 cavities also accept coaxial contacts purchased
separately. Attach optional shielding adapters (799-016) for EMI
protection.
HOW TO ORDER
Sample Part Number
790-026P
L-6P6
MT
G
Part Number
Shell Size Insert Arrangement
Shell Finish
Hardware Option
790-026P
Rear Panel Mounted
Receptacle with Pin
Contacts
See Table 1 for
Available Insert
Arrangements
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
M
Electroless Nickel
MT
36W2 is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
P
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
Example:
36P2 is supplied with 2
power pins.
E
general purpose applications
N
No Hardware
Female Jackpost
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
G
Guide Pin
S
Female Guide Socket
Additional shell finishes are
listed on page C-9.
SPECIFICATIONS
MATERIALS AND FINISHES
Current Rating
#23 5 AMPS, #16 13 A., #12 23 A.
Shell
Aluminum alloy
Dielectric Withstanding
Voltage
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
Contacts
Copper alloy, 50 microinches gold
plated
Insulation Resistance
Operating Temperature
Shock
Vibration
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Insulators
Retention Clips
Interfacial Seal, Grommet
Hardware
Panel Gasket
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-1
www.glenair.com
Series 79
Panel Mount
Connectors
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
How To Order
Table I Contact Arrangements
Contact
Quantity
Layout
A-5
#23 #16 #12
5
2
B-2P2
B-9
9
C-13
13
D-15
15
.195 (4.95)
.025 (0.64)
EMI GASKET
INTERFACIAL SEAL
PIN CONTACT
WIRE (REF.)
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
GUIDE PIN
SHELL
.007
(0.18)
3
F-15P2 13 2
TABLE 2 HARDWARE OPTION
23
5
F-5P5
E
RETAINING CLIP
FRONT INSULATOR
REAR INSULATOR
GROMMET
POTTING
3
D-3P3
F-23
Face View
CROSS-SECTIONAL VIEW OF 790-026P
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
H-54P2 52 2
5
H-5P5
H-66
66
N
P
No Mating Hardware
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and L
have #4-40 UNC thread, other sizes have #256 thread. Stainless steel.
J-17P4 13 4
J-25P2 23 2
J-33
33
7
J-7P7
K-27P4 23 4
G
S
K-35P2 33 2
Guide Pins
Guide Sockets
K-43
Connector is supplied with stainless steel
non-removable guide pins. Mates with type
"S" guide sockets on corresponding plug
connector.
43
9
K-9P9
Connector is supplied with stainless steel
non-removable bushings. Mates with type "G"
guide pins on corresponding plug connector.
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-2
www.glenair.com
Series 79
Panel Mount
Connectors
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
Dimensions
790-026P Shell Size A, B, C, D, E, F, J, K Dimensions
BLIND MATE
A MAX
B BASIC
.308 (7.82)
MAX
C BASIC
D MAX
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR
REFERENCE. SEE
ORDERING INFORMATION
FOR OTHER OPTIONS.
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
.170 (4.32)
.335 (8.51)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
E MAX
C BASIC
E
.215 (5.46)
MAX
.485 (12.32)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
790-026P Dimensions for Size A-F, J and K
Shell
Size
A
B
C
D
E
F
J
K
A Max.
B Basic
In.
mm.
In.
1.211
30.76
.925 23.50
1.361
1.511
1.611
1.761
1.911
34.57
38.38
40.92
44.73
48.54
2.261 57.43
2.661 67.59
mm.
1.075
1.225
1.325
1.475
1.625
27.31
31.12
33.66
37.47
41.28
1.975 50.17
2.375 60.33
C Basic
In.
mm.
.565 14.35
.715
.865
.965
1.115
1.265
18.16
21.97
24.51
28.32
32.13
1.615 41.02
2.015 51.18
D Max.
In.
mm.
.401 10.19
.551
.701
.801
.951
1.101
14.00
17.81
20.35
24.16
27.96
1.460 37.08
1.860 47.24
E Max.
In.
mm.
.760 19.30
.910
1.060
1.160
1.310
1.460
21.11
26.92
29.46
33.27
37.08
1.810 45.97
2.210 56.13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-3
www.glenair.com
Series 79
Panel Mount
Connectors
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
Dimensions
790-026P Shell Size G Dimensions
1.861 (47.27) MAX
BLIND MATE
1.575 (40.01) BASIC
1.215 (30.86) BASIC
.387 (9.83)
MAX
1.079 (27.41) MAX
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
.170 (4.32)
JACKPOST SHOWN FOR REFERENCE.
SEE ORDERING INFORMATION FOR
OTHER OPTIONS.
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
.335 (8.51)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
1.410 (35.81)
MAX
1.215 (30.86) BASIC
.215 (5.46)
MAX
.575 (14.61)
MAX
E
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
790-026P Shell Size H and L Dimensions
F MAX
G BASIC
H BASIC
J MAX
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
BLIND MATE
.410 (10.41)
MAX
JACKPOST SHOWN FOR REFERENCE.
SEE ORDERING INFORMATION FOR
OTHER OPTIONS.
.170 (4.32)
.385 (9.78)
MAX
.093 ± .005
(2.36 ± 0.13)
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE
MISALIGNMENT
FROM CENTERLINE
.640 (16.26)
MAX
K MAX
790-026P SIZE H & L DIMENSIONS
H BASIC
.265 (6.73)
MAX
.600 (15.24)
MAX
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
Shell
Size
H
L
F Max.
In.
mm.
G Basic
In.
mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.450 36.83
1.686 42.82
2.045 51.94
2.281 57.94
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-4
www.glenair.com
Series 79
Panel Mount
Connectors
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
Dimensions
790-026P Shell Size M Dimensions
3.085 (78.36) MAX
2.770 70.36) BASIC
2.200 (55.88) BASIC
.150
(3.81)
MIN 2X
1.745 (44.32) MAX
.660
(16.76)
MAX
2X 6-32 UNC-2B
X .150 (3.81) MIN
.470
(11.94)
MAX
GUIDE PIN SHOWN FOR REFERENCE
SEE TABLE I (DWG. SHEET #1)
.170 (4.32)
.093±.005
(2.36±0.13)
.385 (9.78)
MAX.
.640 (16.26)
MAX.
E
2.485 MAX.
.320 (8.13)
MAX.
2.200 (55.88) BASIC
BLIND MATE
4-40 UNC-2B
X (.150) MIN DEEP.
2 PLACES
SHELL SIZE M
+/- .050 (0.76) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-5
www.glenair.com
Series 79
Panel Mount
Connectors
790-027S
Crimp Terminated Panel Mount Plugs,
Socket Contacts
How To Order
790-027S Panel Mount Plugs
socket contacts with CRIMP TERMINATION
790-027S connectors are designed for rear-panel mounting and are
supplied with conductive panel gaskets. These connectors feature machined
aluminum shells and wire grommets for environmental protection. Contacts
are rear-release snap-in crimp type. Connectors are supplied with crimp
contacts packaged separately. Size #23 signal pins accept up to #22 AWG
wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept
#12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts
purchased separately. Attach optional shielding adapters (799-016) for EMI
protection.
How To Order
790-027S
H-66
Part Number
Shell Size Insert Arr.
790-027S
E
Rear Panel Mounted
Plug with Socket
Contacts
See Table 1 for
Available Insert
Arrangements
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in
the insert arrangement.
Example:
36P2 is supplied with 2
power pins.
36W2 is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
Specifications
Sample Part Number
M
E
P
Shell Finish
EMI Spring
Hardware Option
M
E
Electroless Nickel
EMI Spring
MT
N
general purpose applications
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
N
No Hardware
No Spring
EMI
SPRING
G
Guide Pin
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
Additional shell finishes
are listed on page C-9.
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
P
Female Jackpost
S
Female Guide Socket
Materials and Finishes
Contacts
Insulators
Retention Clips
Grommet
Hardware
Panel Gasket
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-6
www.glenair.com
Series 79
Panel Mount
Connectors
790-027S
Crimp Terminated Panel Mount Plugs,
Socket Contacts
How To Order
Table I Contact Arrangements
Contact
Quantity
Layout
A-5
#23 #16 #12
5
CROSS-SECTIONAL VIEW OF 790-027S
RETAINING CLIP
Face View
FRONT INSULATOR
REAR INSULATOR
EMI GASKET
GROMMET
EMI SPRING
2
B-2P2
B-9
9
C-13
13
D-15
15
.183 (4.65)
.025 (0.64)
POTTING
SOCKET CONTACT
WIRE (REF.)
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
SHELL
.007
(0.18)
3
F-15P2 13 2
F-23
TABLE 2 HARDWARE OPTION
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
N
H-54P2 52 2
5
H-5P5
H-66
E
2
66
J-17P4 13 4
P
No Mating Hardware
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and L
have #4-40 UNC thread, other sizes have #256 thread. Stainless steel.
J-25P2 23 2
J-33
33
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
G
S
Guide Pins
Guide Sockets
Connector is supplied with stainless steel
non-removable guide pins. Mates with
type "S" guide sockets on corresponding
receptacle connector.
Connector is supplied with stainless steel
non-removable bushings. Mates with type
"G" guide pins on corresponding receptacle
connector.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-7
www.glenair.com
Series 79
Panel Mount
Connectors
790-027S
Crimp Terminated Panel Mount Plugs,
Socket Contacts
Dimensions
790-027S Shell Size A, B, C, D, E, F, J and K Dimensions
A MAX
B BASIC
C BASIC
D MAX
.158
(4.01)
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
BLIND MATE
.233 (5.92)
MAX
JACKPOST SHOWN FOR
REFERENCE.
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
SPRING,
EMI
.335 (8.51)
.640
MAX
(16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
E MAX
C BASIC
E
.215 (5.46)
MAX
.485
(12.32)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
790-027S Shell Size A-F, J and K Dimensions
790-027S SIZE A-F, J, K DIMENSIONS
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
B Basic
In . mm.
C Basic
In.
mm.
D Max.
In.
mm.
E Max.
In.
mm.
1.211 30.76
1.361 34.57
1.511 38.38
.925 23.50
1.075 27.31
1.225 31.12
.565 14.35
.715 18.16
.865 21.97
.335
8.51
.485 12.32
.635 16.13
.760 19.30
.910 21.11
1.060 26.92
1.611 40.92
1.761 44.73
1.325 33.66
1.475 37.47
.965 24.51
1.115 28.32
.735 18.67
.885 22.48
1.160 29.46
1.310 33.27
1.911 48.54
2.261 57.43
2.661 67.59
1.625 41.28
1.975 50.17
2.375 60.33
1.265 32.13
1.615 41.02
2.015 51.18
1.035 26.29
1.390 35.31
1.795 45.59
1.460 37.08
1.810 45.97
2.210 56.13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-8
www.glenair.com
Series 79
Panel Mount
Connectors
790-027S
Crimp Terminated Panel Mount Plugs,
Socket Contacts
Dimensions
790-027S Shell Size G Dimensions
1.861 (47.27) MAX
1.575 (40.01) BASIC
1.215 (30.86) BASIC
BLIND MATE
.320 (8.13)
MAX
1.010 (25.65) MAX
.158 (4.01)
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR
REFERENCE.
.335 (8.51)
MAX
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
1.410 (35.81)
MAX
1.215 (30.86) BASIC
E
.215 (5.46)
MAX
.575 (14.61)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-9
www.glenair.com
Series 79
Panel Mount
Connectors
790-027S
Crimp Terminated Panel Mount Plugs,
Socket Contacts
Dimensions
790-027S Shell Size H and L Dimensions
F MAX
G BASIC
H BASIC
J MAX
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
BLIND MATE
.349 (8.86)
MAX
JACKPOST SHOWN FOR REFERENCE.
SEE ORDERING INFORMATION FOR
OTHER OPTIONS.
.158 (4.01)
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
.385 (9.78)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
K MAX
790-027S SIZE H & L DIMENSIONS
H BASIC
.265 (6.73)
MAX
.600 (15.24)
MAX
E
Shell
Size
H
L
F Max.
In.
mm.
G Basic
In.
mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
2.045 51.94
2.281 57.94
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
790-027S Shell Size M Dimensions
3.085 (78.36) MAX
2.770 70.36) BASIC
2.200 (55.88) BASIC
.150 (3.81)
MIN.
2X
1.675 (42.65) MAX.
.660
(16.76)
MAX
2X 6-32 UNC-2B
X .150 (3.81) MIN
.407 (10.34)
MAX.
JACKPOST SHOWN FOR REFERENCE
SEE TABLE I (DWG. SHEET #1 )
.093±.005
(2.36±0.13)
.158 (4.01)
BLIND MATE
.385 (9.78)
MAX.
.640 (16.26)
MAX.
2.485 MAX.
.320 (8.13)
MAX.
2.200 (55.88) BASIC
SHELL SIZE M
+/- .050 (0.76) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
4-40 UNC-2B
X (.150) MIN DEEP.
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-10
www.glenair.com
Series 79
Panel Mount
Connectors
790-050P
Crimp Terminated Rear Panel
Float Mount Receptacles, Pin Contacts
How To Order
790-050P Rear Panel Float Mount Receptacles
PIN CONTACTS WITH CRIMP TERMINATION
790-050P connectors are equipped with rear-panel float mounting
assemblies to provide additional mounting leeway in rack and panel
applications. These connectors feature machined aluminum shells and
wire grommets for environmental protection. Contacts are rear-release
snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16
contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG
wire. Size 12 and 16 cavities also accept coaxial contacts purchased
separately. Attach optional shielding adapters (799-016) for EMI protection.
HOW TO ORDER
790-050P
H-66
Part Number
790-050P
Rear Panel
Float Mounted
Receptacle with
Pin Contacts
Sample Part Number
M
P
Shell Size Insert Arrangements
Shell Finish
Hardware Option
See Table I for Available Insert
Arrangements
Electroless Nickel
To order a connector without size
#16 or #12 power pins, substitute
“W” instead of “P” in the insert
arrangement.
Example:
36P2 is supplied with 2 power pins.
M
general purpose applications
N
No Hardware
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection and
durability
(non-reflective grey)
36W2 is supplied less the power
pins.
See Section B for coaxial contacts
purchased separately.
G
Guide Pin
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
S
Female Guide Socket
Additional shell finishes are
listed on page C-9.
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
SPECIFICATIONS
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
MATERIALS AND FINISHES
Contacts
Insulators
Retention Clips
Grommet
Hardware
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-11
www.glenair.com
E
Series 79
Panel Mount
Connectors
790-050P
Crimp Terminated Rear Panel
Float Mount Receptacles, Pin Contacts
How To Order
CROSS-SECTIONAL VIEW OF 790-050P
Table I Contact Arrangements
Contact
Quantity
Layout
A-5
#23 #16 #12
RETAINING CLIP
Face View
FRONT INSULATOR
5
2
B-2P2
B-9
9
C-13
13
D-15
15
.195
(5.0)
REAR INSULATOR
INTERFACIAL
SEAL
GROMMET
WIRE
(REF. ONLY)
PIN
CONTACT
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
ALIGNMENT POST
HOUSING
.025 (0.64)
3
FLOAT MOUNT
ASSEMBLY
F-15P2 13 2
F-23
5
F-5P5
E
TABLE 2 HARDWARE OPTION
23
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
N
H-54P2 52 2
H-66
No Mating Hardware
5
H-5P5
G
66
J-17P4 13 4
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Guide Pins
Connector is supplied with stainless steel
non-removable guide pins. Mates with
type “S” guide sockets on corresponding
receptacle connector.
J-25P2 23 2
J-33
33
S
Guide Sockets
7
J-7P7
Connector is supplied with stainless steel
non-removable bushings. Mates with
type “G” guide pins on corresponding
receptacle connector.
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-12
www.glenair.com
Series 79
Panel Mount
Connectors
790-050P
Crimp Terminated Rear Panel
Float Mount Receptacles, Pin Contacts
Dimensions
790-050P Shell Sizes A, B, C, D, E, F, J and K Dimensions
AA MAX
Max.
BBBASIC
Basic
CCBASIC
Basic
B
.308
(7.82)
MAX
DDMAX
Max.
.150 (3.81)
MIN 2X
B
SEE SECTION B-B
FOR FLOATMOUNT DETAILS
.195 ±.003
(4.95 ±0.08
BLIND MATE
Jackpost
ShownSHOWN
JACKPOST
for
Reference
FOR
REFERENCE
.810
(20.57)
MAX
.645
(16.38)
MAX
.093 ±.003
(2.36 ±0.13)
SHELL SIZES A, B, C, D, E, F, G, J, K
±.030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
EEMAX
Max.
.215 (5.46)
MAX
CCBASIC
Basic
.040 RADIAL FLOAT
BETWEEN CONNECTOR
AND HARDWARE
.218
.138
.485
(12.32)
MAX
Connector
Hardware
.093
SECTION B-B
FOR SIZES “A, B, C, D, E, F, G, J & K”
CONNECTORS
(HARDWARE IS FOR #2-56 SCREW)
2-56 UNC-2B
2X
790-050P SIZES A, B, C, D, E, F, G, J & K DIMENSIONS
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
B Basic
In . mm.
C Basic
In.
mm.
D Max.
In.
mm.
E Max.
In.
mm.
1.600 40.64
1.700 43.18
1.125 28.58
1.275 32.38
.565 14.35
.715 18.16
.401 10.19
.551 14.00
.760 19.30
.910 21.11
1.900 48.26
2.000 50.80
2.150 54.61
1.425 36.20
1.525 38.74
1.675 42.55
.865 21.97
.965 25.51
1.115 28.32
.701 17.81
.801 20.35
.951 24.16
1.060 26.92
1.160 29.46
1.310 33.27
2.300 58.42
2.650 67.31
3.050 77.47
1.825 46.36
2.175 55.25
2.575 65.41
1.265 32.13
1.615 41.02
2.015 51.18
1.101 27.96
1.456 36.98
1.860 47.24
1.460 37.08
1.810 45.97
2.210 56.13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-13
www.glenair.com
E
Series 79
Panel Mount
Connectors
790-050P
Crimp Terminated Rear Panel
Float Mount Receptacles, Pin Contacts
Dimensions
790-050P Shell Size G Dimensions
2.250
2.250(57.15)
(57.15) Max.MAX
1.775(45.08)
(45.08) Basic
1.775
BASIC
1.215
BASIC
1.215(30.86)
(30.86) Basic
B
1.079 (24.71)
(24.71) Max.MAX
1.079
.150 (3.81)
MIN 2X
B
.195 ±.003
(4.95 ± 0.08)
.387
(9.83)
MAX
SEE SECTION B-B
FOR FLOATMOUNT DETAILS
Jackpost ShownSHOWN
JACKPOST
For Reference
FOR
REFERENCE
.218
.810 (20.57)
MAX
.645 (16.38)
MAX
.093 ±.003
(2.36 ±0.13)
E
.040 RADIAL
FLOAT
BETWEEN
CONNECTOR
AND
HARDWARE
.138
Connector
Hardware
.093
SECTION B-B
FOR SIZES “A, B, C, D, E ,F, G, J &
K” CONNECTORS
(HARDWARE IS FOR #2-56 SCREW)
1.410
MAX
1.410(35.81)
(35.81) Max.
1.215(30.86)
(30.86) Basic
1.215
BASIC
.215
.215 (5.46)
(5.46)
MAX
Max.
.575
(14.61)
MAX
2-56 UNC-2B
2X
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-14
www.glenair.com
Series 79
Panel Mount
Connectors
790-050P
Crimp Terminated Rear Panel
Float Mount Receptacles, Pin Contacts
Dimensions
790-050P Shell Sizes H and L Dimensions
FF Max.
MAX
GGBASIC
Basic
H HBASIC
Basic
JJMAX
Max.
A
.150 (3.81)
MIN 2X
A
.415
(10.54)
MAX
.195 ±.003
(4.95 ±0.08
SEE SECTION A-A
FOR FLOATMOUNT DETAILS
JACKPOST SHOWN
FOR REFERENCE
.810
(20.57)
MAX
.645
(16.38)
MAX
.093 ±.003
(2.36 ±0.13)
Max.
KKMAX
.265
.265(6.73)
(6.73)
MAX
Max.
H HBASIC
Basic
.250
.040 RADIAL
FLOAT
BETWEEN
CONNECTOR
AND
HARDWARE
.170
.600
.600
(15.24)
(15.24)
Max.
MAX
Connector
Hardware
.120
Section A-A
SECTION
B-B
For Size "H & L" Connector
FOR SIZES
“H &IsL”For
CONNECTORS
(Hardware
#4-40 Screw)
(HARDWARE IS FOR #4-40 SCREW)
4-40 UNC-2B
2X (.150) MIN DEEP
BLIND MATE
790-050P SIZES H & L DIMENSIONS
A Max.
Shell
Size In.
mm.
2.780 70.61
H
3.016 76.61
L
B Basic
In . mm.
C Basic
In.
mm.
D Max.
In.
mm.
E Max.
In.
mm.
2.415 61.34
2.651 67.34
1.800 45.72
2.036 51.71
1.450 36.83
1.686 42.82
2.045 51.94
2.281 57.94
SHELL SIZES H, L
±.040 (1.02) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-15
www.glenair.com
E
Series 79
Panel Mount
Connectors
790-050P
Crimp Terminated Rear Panel
Float Mount Receptacles, Pin Contacts
Dimensions
790-050P Shell Size M Dimensions
3.450 (87.63)
(87.63) Max.
3.450
MAX
3.350 (85.09)
3.350
(85.09)
3.005(76.33)
(76.33) Max.
3.005
MAX
.150 (3.81)
MIN 2X
2.200(55.88)
(55.88) Basic
2.200
BASIC
1.745(44.32)
(44.32) Max
1.745
MAX
A
A
.660
.660
(16.76)
(16.76)
Max
MAX
SEE SECTION A-A
FOR FLOATMOUNT DETAILS
.195 ±.003
(4.95 ± 0.13)
.470
.470
(11.94)
(11.94)
Max
MAX
Jackpost
ShownSHOWN
For Reference
JACKPOST
FOR REFERENCE
.810
.810 (20.57)
(20.57)
Max.
MAX
.645
.645 (16.38)
(16.38)
MAX
Max.
.093±.003
.093
±.003
(2.36±0.13)
(2.36
±0.13)
2.485 (63.12)
(63.12) Max.
2.485
MAX
E
.270
.170
2.200(55.88)
(55.88) Basic
2.200
BASIC
.050 RADIAL
FLOAT
BETWEEN
CONNECTOR
AND
HARDWARE
Connector
Hardware
.120
Section A-A
SECTION
A-A
For Size "M" Connector
FOR(Hardware
SIZE “M”
CONNECTOR
Is For
#4-40 Screw)
(HARDWARE IS FOR #4-40 SCREW)
4-40 UNC-2B
X (.150) MIN DEEP
2 PLACES
BLIND MATE
SHELL SIZE M
±.050 (1.27) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-16
www.glenair.com
Series 79
Panel Mount
Connectors
790-049S
Crimp Terminated Rear Panel
Float Mount Plugs, Socket Contacts
How To Order
790-049S Rear Panel Float Mount Plugs
SOCKET CONTACTS WITH CRIMP TERMINATION
790-049S connectors are equipped with rear-panel float mounting
assemblies to provide additional mounting leeway in rack and panel
applications. These connectors feature machined aluminum shells and
wire grommets for environmental protection. Contacts are rear-release
snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16
contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG
wire. Size 12 and 16 cavities also accept coaxial contacts purchased
separately. Attach optional shielding adapters (799-016) for EMI protection.
HOW TO ORDER
790-049S
H-66
Part Number
790-049S
Rear Panel
Float Mounted
Receptacle with
Socket Contacts
Sample Part Number
M
E
P
Shell Size Insert Arrangements
Shell Finish
EMI Spring
Hardware Option
See Table I for Available
Insert Arrangements
Electroless Nickel
EMI Spring
MT
No Spring
To order a connector
without size #16 or #12
power pins, substitute “W”
instead of “P” in the insert
arrangement.
Example:
36P2 is supplied with 2
power pins.
36W2 is supplied less the
power pins.
See Section B for coaxial
contacts purchased
separately.
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
SPECIFICATIONS
M
E
general purpose applications
N
N
No Hardware
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
EMI
SPRING
G
Guide Pin
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
Additional shell finishes
are listed on page C-9.
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
S
Female Guide Socket
MATERIALS AND FINISHES
Contacts
Insulators
Retention Clips
Grommet
Hardware
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-17
www.glenair.com
E
Series 79
Panel Mount
Connectors
790-049S
Crimp Terminated Rear Panel
Float Mount Plugs, Socket Contacts
How To Order
CROSS-SECTIONAL VIEW OF 790-049S
Table I Contact Arrangements
Contact
Quantity
Layout
A-5
#23 #16 #12
5
B-9
9
C-13
13
D-15
15
FRONT INSULATOR
RETAINING CLIP
REAR INSULATOR
2
B-2P2
Face View
WIRE
(REF. ONLY)
EMI SPRING
.183
GROMMET
SOCKET
CONTACT
ALIGNMENT
BUSHING
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
HOUSING
.025
3
FLOAT MOUNT
ASSEMBLY
F-15P2 13 2
F-23
5
F-5P5
E
TABLE 2 HARDWARE OPTION
23
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
N
H-54P2 52 2
H-66
No Mating Hardware
5
H-5P5
G
66
J-17P4 13 4
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Guide Pins
Connector is supplied with stainless steel
non-removable guide pins. Mates with
type “S” guide sockets on corresponding
receptacle connector.
J-25P2 23 2
J-33
S
33
Guide Sockets
Connector is supplied with stainless steel
non-removable bushings. Mates with type
“G” guide pins on corresponding receptacle
connector.
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-18
www.glenair.com
Series 79
Panel Mount
Connectors
790-049S
Crimp Terminated Rear Panel
Float Mount Plugs, Socket Contacts
Dimensions
790-049S Shell Sizes A, B, C, D, E, F, J and K Dimensions
AAMAX
Max.
BBBASIC
Basic
CCBASIC
Basic
B
.233
(5.92)
MAX
AD MAX
Max.
.150 (3.81)
MIN 2X
B
SEE SECTION B-B
FOR FLOATMOUNT DETAILS
.183 ±.003
(4.65 ±0.08)
BLIND MATE
EMI
SPRING
JACKPOST SHOWN
FOR REFERENCE
.795
.795
(20.19)
(20.19)
Max.
MAX
.645
.645
(16.38)
(16.38)
Max.
MAX
.093 ±.003
(2.36 ±0.13)
EE MAX
Max.
SHELL SIZES A, B, C, D, E, F, G, J, K
±.030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
.215
.218
.215(5.46)
(5.46)
MAX
Max.
CCBASIC
Basic
.485
(12.32)
MAX
.138
.040 RADIAL
FLOAT
BETWEEN
CONNECTOR
AND
HARDWARE
Connector
Hardware
.093
SECTION B-B
FOR SIZES “A, B, C, D, E, F, G, J & K”
CONNECTORS
(HARDWARE IS FOR #2-56 SCREW)
2-56 UNC-2B
2X
790-049S SIZES A, B, C, D, E, F, G, J & K DIMENSIONS
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
B Basic
In . mm.
C Basic
In.
mm.
D Max.
In.
mm.
E Max.
In.
mm.
1.600 40.64
1.700 43.18
1.125 28.58
1.275 32.38
.565 14.35
.715 18.16
.335
8.51
.485 12.32
.760 19.30
.910 21.11
1.900 48.26
2.000 50.80
2.150 54.61
1.425 36.20
1.525 38.74
1.675 42.55
.865 21.97
.965 25.51
1.115 28.32
.635 16.13
.735 18.67
.885 22.48
1.060 26.92
1.160 29.46
1.310 33.27
2.300 58.42
2.650 67.31
3.050 77.47
1.825 46.36
2.175 55.25
2.575 65.41
1.265 32.13
1.615 41.02
2.015 51.18
1.035 26.29
1.390 35.31
1.795 45.59
1.460 37.08
1.810 45.97
2.210 56.13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-19
www.glenair.com
E
Series 79
Panel Mount
Connectors
790-049S
Crimp Terminated Rear Panel
Float Mount Plugs, Socket Contacts
Dimensions
790-049S Shell Size G Dimensions
2.250(57.15)
(57.15) Max.MAX
2.250
1.775
BASIC
1.775(45.08)
(45.08) Basic
1.215
BASIC
1.215(30.86)
(30.86) Basic
B
.320
.320(8.13)
(8.13)
MAX
Max
1.010(25.65)
(25.65) Max.MAX
1.010
.150 (3.81)
MIN 2X
B
.183 ±.003
(4.65 ±0.08)
SEE SECTION B-B
FOR FLOATMOUNT DETAILS
JACKPOST SHOWN
FOR REFERENCE
EMI Spring
EMI
SPRING
.218
.795
.795 (20.19)
(20.19)
MAX
Max.
.645
.645(16.38)
(16.38)
MAX
Max.
.093
±.003
.093±.003
(2.36
±0.13)
(2.36±0.13)
1.215(30.86
(30.86) Basic
1.215
BASIC
.138
Connector
Hardware
.093
SECTION B-B
FOR SIZES “A, B, C, D, E, F, G, J & K”
CONNECTORS
(HARDWARE IS FOR #2-56 SCREW)
1.410
1.410 (35.81)
(35.81) Max.MAX
E
.040 RADIAL
FLOAT
BETWEEN
CONNECTOR
AND
HARDWARE
.215
.215 (5.46)
(5.46)
MAX
Max.
.570.570
(14.48)
(14.48)
Max.
MAX
UNC-2B
2-562-56
UNC-2B
2X
2X
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-20
www.glenair.com
Series 79
Panel Mount
Connectors
790-049S
Crimp Terminated Rear Panel
Float Mount Plugs, Socket Contacts
Dimensions
790-049S Shell Sizes H and L Dimensions
Max.
FFMAX
G GBASIC
Basic
H BASIC
H Basic
.349 (8.86)
.349
(8.86
MAX
Max
J JMAX
Max.
A
.150
(3.81)
MIN 2X
A
.183
±.003
.183±.003
(4.65
(4.65±0.08)
±0.08)
SEE SECTION A-A
FOR FLOATMOUNT DETAILS
Jackpost ShownSHOWN
JACKPOST
For Reference
FOR
REFERENCE
EMI Spring
EMI
SPRING
.040 RADIAL
FLOAT
BETWEEN
AND
HARDWARE
.795 (20.19)
(20.19)
.795
MAX
Max.
.645
.645 (16.38)
(16.38)
MAX
Max.
.093
±.003
.093±.003
(2.36
± 0.13)
(2.36±0.13)
.250
.170
CONNECTOR
Max.
K KMAX
.265
.265 (6.73)
(6.73)
MAX
Max.
H Basic
H BASIC
HARDWARE
.120
.120
Section A-A
SECTION
A-A
For Size "H & L" Connector
FOR SIZES
“H Is
& for
L” #4-40
CONNECTORS
(Hardware
Screw)
(HARDWARE IS FOR #4-40 SCREW)
.600
.600
(15.24)
(15.24)
Max.
MAX
BLIND MATE
4-40 UNC-2B
4-40
UNC-2B
X (.150)
Min
Deep.
X
(1.50)
MIN
DEEP
790-050P SIZES H & L DIMENSIONS
F Max.
Shell
Size In.
mm.
2.780 70.61
H
3.016 76.61
L
G Basic
In . mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.415 61.34
2.651 67.34
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
2.045 51.94
2.281 57.94
SHELL SIZES H, L
±.040 (1.02) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-21
www.glenair.com
E
Series 79
Panel Mount
Connectors
790-049S
Crimp Terminated Rear Panel
Float Mount Plugs, Socket Contacts
Dimensions
790-049S Shell Size M Dimensions
3.450 (87.63) Max.
3.350 (85.09)
3.005 (76.33) Max.
.150
(3.81)
MIN 2X
2.200 (55.88) Basic
1.675 (42.65) Max.
A
A
.660
(16.76)
Max
See Section A-A
for Floatmount
Details
.183±.003
(4.65±0.08)
.407 (10.34)
Max.
Jackpost Shown For Reference
.795 (20.19)
Max.
.645 (16.38)
Max.
.093±.003
(2.36±0.13)
2.485 (63.12) Max.
E
2.200 (55.88) Basic
BLIND MATE
4-40 UNC-2B
X (.150) Min Deep.
2 Places
.270
.170
.050 Radial Float
Between Connector and
Hardware
Connector
SHELL SIZE M
±.050 (1.27) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
Hardware
.120
Section A-A
For Size "M" Connector
(Hardware Is For #4-40 Screw)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
E-22
www.glenair.com
Series 79
Straight
PCB Connectors
790-028P
Straight PCB Terminated
Panel Mount Receptacle, Pin Contacts
How To Order
790-028P Straight PCB Panel Mount Receptacle
PIN CONTACTS WITH STRAIGHT PCB TERMINATION
790-028P connectors are designed for rear-panel mounting and are supplied
with conductive panel gaskets. These connectors feature machined aluminum
shells, fluorosilicone face seals and straight printed circuit board contacts.
Contacts are epoxy-encapsulated and are non-removable. Contacts are gold
plated. Connector shells provide blind threaded holes for attaching to panel
and to printed circuit board. Available in 29 different insert arrangements,
these connectors feature size #23 contacts for signal and data. For higher
current applications, size #16 contacts provide up to 13 amps and size #12
contacts handle up to 23 amps.
HOW TO ORDER
Sample Part Number
790-028P
J-25P2
M
P
A
Part Number
Shell Size Insert
Arrangements
Shell Finish
Hardware Option
PC Tail Length
790-028P
Rear Panel Mounted
Receptacle with PC
Tail Pin Contacts
for Termination
to Backplanes or
Flexible Circuits
See Table 1 for
Available Insert
Arrangements
M
A
Electroless Nickel
.125 Inch (3.2 mm.)
general purpose applications
N
B
No Hardware
MT
.250 inch (6.4 mm.)
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
G
F
Guide Pin
ZNU
Zinc-Nickel with Black
Chromate
PC TAIL
LENGTH
tactical applications
(non-reflective black)
P
Female Jackpost
Additional shell finishes are
listed on page C-9.
S
Female Guide Socket
Current Rating
SPECIFICATIONS
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16 1800 VAC
Dielectric Withstanding Voltage
RMS
Insulation Resistance
5000 megohms minimum
Operating Temperature
-65° C. to +150° C.
Shock
300 g.
Vibration
37 g.
Shell
MATERIALS AND FINISHES
Contacts
Insulators
Retention Clips
Interfacial Seal
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-1
www.glenair.com
Series 79
Straight
PCB Connectors
790-028P
Straight PCB Terminated
Panel Mount Receptacle, Pin Contacts
How To Order
Table I Contact Arrangements
CROSS-SECTIONAL VIEW OF 790-028P
Contact
Quantity
Layout
A-5
#23 #16 #12
5
INSULATOR
EPOXY
2
B-2P2
B-9
9
C-13
13
D-15
15
INTERFACIAL SEAL
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
SHELL
.007
(0.18)
3
TABLE 2 HARDWARE OPTION
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
H-54P2 52 2
5
H-5P5
H-66
CONTACT PIN
PC TAIL
F-15P2 13 2
F
EMI GASKET
.025 (0.64)
3
D-3P3
F-23
.195 (4.95)
Face View
N
P
No Mating Hardware
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and
L have #4-40 UNC thread, other sizes have
#2-56 thread.
66
J-17P4 13 4
J-25P2 23 2
J-33
33
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
S
Guide Sockets
Connector is supplied with stainless steel
non-removable guide pins. Mates with type
"S" guide sockets on corresponding plug
connector.
43
9
K-9P9
G
Guide Pins
Connector is supplied with stainless steel
non-removable bushings. Mates with type
"G" guide pins on corresponding plug
connector.
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-2
Series 79
Straight
PCB Connectors
790-028P
Straight PCB Terminated
Panel Mount Receptacle, Pin Contacts
Dimensions
790-028P Shell Size A, B, C, D, E, F, J and K Dimensions
A MAX
CONTACT TAIL DIA
#23 CONTACT
.018/.022 (0.46/0.56)
#16 CONTACT
.060/.064 (1.52/1.63)
B BASIC
.308 (7.82)
MAX
C BASIC
D MAX
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST
SHOWN FOR
REFERENCE.
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
BLIND MATE
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
.170 (4.32)
.335 (8.51)
MAX
.510 (12.95)
MAX
.093 ± .005
(2.36 ± 0.13)
E MAX
C BASIC
.215 (5.46)
MAX
.485 (12.32)
MAX
F
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
790-028P DIMENSIONS FOR SIZE A-F, J AND K
Shell
Size
A
B
C
D
E
F
J
K
A Max.
B Basic
C Basic
D Max.
E Max.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
In.
mm.
1.211
1.361
1.511
1.611
1.761
30.76
34.57
38.38
40.92
44.73
.925
1.075
1.225
1.325
1.475
23.50
27.31
31.12
33.66
37.47
.565
.715
.865
.965
1.115
14.35
18.16
21.97
24.51
28.32
.401
.551
.701
.801
.951
10.19
14.00
17.81
20.35
24.16
.760
.910
1.060
1.160
1.310
19.30
21.11
26.92
29.46
33.27
1.911 48.54
2.261 57.43
2.661 67.59
1.625 41.28
1.975 50.17
2.375 60.33
1.265 32.13
1.615 41.02
2.015 51.18
1.101 27.96
1.460 37.08
1.860 47.24
1.460 37.08
1.810 45.97
2.210 56.13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-3
www.glenair.com
Series 79
Straight
PCB Connectors
790-028P
Straight PCB Terminated
Panel Mount Receptacle, Pin Contacts
Dimensions
790-028P Shell Size G Dimensions
1.861 (47.27) MAX
1.575 (40.01) BASIC
1.215 (30.86) BASIC
2-56 UNC-2B
X .150 (3.81) MIN
2 PLACES
.387 (9.83)
MAX
1.079 (27.41) MAX
JACKPOST SHOWN FOR
REFERENCE.
.170 (4.32)
.335 (8.51)
MAX
.018/.022
(0.46/0.56)
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.510 (12.95)
MAX
.093 ± .005
(2.36 ± 0.13)
BLIND MATE
1.410 (35.81)
MAX
1.215 (30.86) BASIC
.215 (5.46)
MAX
.575 (14.61)
MAX
F
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-4
Series 79
Straight
PCB Connectors
790-028P
Straight PCB Terminated
Panel Mount Receptacle, Pin Contacts
Dimensions
790-028P Shell Size H and L Dimensions
F MAX
G BASIC
H BASIC
J MAX
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
#12 CONTACT .096/.092 (2.44/2.34)
.410 (10.41)
MAX
BLIND MATE
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
JACKPOST SHOWN FOR
REFERENCE.
.170 (4.32)
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
.335 (8.51)
.510 (12.95)
MAX
MAX
.093 ± .005
(2.36 ± 0.13)
K MAX
790-028P SIZE H & L DIMENSIONS
H BASIC
.265 (6.73)
MAX
.600 (15.24)
MAX
Shell
Size
H
L
F Max.
In.
mm.
G Basic
In.
mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.450 36.83
1.686 42.82
2.045 51.94
2.281 57.94
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
790-028P Shell Size M Dimensions
3.085 (78.36)
MAX MAX
3.085
(78.36)
2.770 (70.36)
70.36) BASICBASIC
2.770
2.200 (55.88)
BASICBASIC
2.200
(55.88)
1.745 (44.32)
MAX MAX
1.745
(44.32)
F
.150 (3.81)
MIN 2X
.660
.660
(16.76)
(16.76)
MAX
MAX
.170
(4.32)
.170 (4.32)
2X
UNC-2B
2X 6-32
6-32 UNC-2B
X .150
.150 (3.81)
X
(3.81) MIN
MIN
JACKPOST SHOWN
FOR REFERENCE
.470
.470
(11.94)
(11.94)
MAX
MAX
.093
±.005
.093±.005
(2.36±0.13)
(2.36
±0.13)
.335 (8.51)
MAX
BLIND MATE
.510
(12.96)
.510 (12.96)
MAX.
MAX
MAX. MAX
2.4852.485
(63.1)
.320
(8.13)
.320 (8.13)
MAX
MAX.
2.200 (55.88)
BASICBASIC
2.200
(55.88)
SHELL SIZE M
+/- .050 (1.27) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
4-40 UNC-2B
X 1.50 (3.81) MIN 2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-5
www.glenair.com
Series 79
Straight
PCB Connectors
790-043P
Straight PCB Terminated
Free-Standing Receptacle, Pin Contacts
How To Order
790-043P Straight PCB Free-Standing Receptacles
PIN CONTA
CONTACTS WITH STRAIGHT PCB TERMINATION
790-043P connectors feature thru-hole termination to rigid or flexible circuits.
These free-standing vertical mount headers mate with 790-025S cable connectors.
29 contact arrangements include size #16 and #12 power contacts for maximum
design flexibility. Contacts are epoxy encapsulated and are non-removable.
Fluorosilicone face seal provides watertight sealing when mated. One-piece
machined aluminum shell has threaded holes for board attachment.
HOW TO ORDER
Sample Part Number
790-043P
K-9P9
M
P
A
Part Number
Shell Size Insert
Arrangements
Shell Finish
Hardware Option
PC Tail Length
790-043P
Receptacle with Straight
PC Tail Pin Contacts for
Termination to Backplanes
or Flexible Circuits
See Table 1 for
Available Insert
Arrangements
M
A
Electroless Nickel
.125 Inch (3.2 mm.)
general purpose applications
B
MT
.250 inch (6.4 mm.)
Nickel-PTFE
N
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
No Hardware
ZNU
F
Zinc-Nickel with Black
Chromate
PC TAIL
LENGTH
P
tactical applications
(non-reflective black)
Female Jackpost
Additional shell finishes are
listed on page C-9.
MATERIALS AND FINISHES
SPECIFICATIONS
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulators
Interfacial Seal
Jackpost
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Flourosilicone rubber
300 series stainless steel
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-6
Series 79
Straight
PCB Connectors
790-043P
Straight PCB Terminated
Free-Standing Receptacle, Pin Contacts
How To Order
Table I Contact Arrangements
CROSS-SECTIONAL VIEW OF 790-043P
Contact
Quantity
Layout
A-5
#23 #16 #12
INSULATOR
EPOXY
Face View
PIN CONTACT
5
PC TAIL
2
B-2P2
B-9
9
C-13
13
D-15
15
INTERFACIAL SEAL
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
SHELL
TABLE 2 HARDWARE OPTION
3
F-15P2 13 2
F-23
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
H-54P2 52 2
P
No Mating Hardware
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Jackposts
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and
L have #4-40 UNC thread, other sizes have
#2-56 thread.
5
H-5P5
H-66
N
F
66
J-17P4 13 4
J-25P2 23 2
J-33
33
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-7
www.glenair.com
Series 79
Straight
PCB Connectors
790-043P
Straight PCB Terminated
Free-Standing Receptacle, Pin Contacts
Dimensions
790-043P Shell Size A-G, J and K Dimensions
CONTACT TAIL DIA
#23 CONTACT
.018/.022 (0.46/0.56)
#16 CONTACT
.060/.064 (1.52/1.63)
A MAX
B BASIC
C MAX
.308 (7.82) MAX
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
#2-56 JACKPOST
2 PLACES
.195 ± .003
(4.95 ± 0.08)
790-043P SHELL SIZE A-K, J & K
DIMENSIONS
.485 (12.32)
MAX
Shell
Size
A
B
C
D
E
F
J
K
.215 (5.46)
MAX
B BASIC
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
A Max.
In.
mm.
B Basic
In . mm.
C Max.
In.
mm.
.785 19.94
.935 23.75
1.085 27.56
.565 14.35
.715 18.16
.865 21.97
.400 10.16
.551 14.00
.701 17.81
1.185
1.335
1.485
1.845
2.240
30.10
33.91
37.72
46.86
56.90
.965
1.115
1.265
1.615
2.015
24.51
28.32
32.13
41.02
51.18
.801
.951
1.101
1.460
1.860
20.35
24.16
27.96
37.08
47.24
790-043P Shell Size G Dimensions
1.435 (1.80) MAX
1.215 (30.86) BASIC
F
.018/.022
(0.46/0.56)
1.079 (27.41) MAX
.395
(10.03)
MAX
#2-56 JACKPOST
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.195 ± .003
(4.95 ± 0.08)
.485 (12.32)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-8
Series 79
Straight
PCB Connectors
790-043P
Straight PCB Terminated
Free-Standing Receptacle, Pin Contacts
Dimensions
790-043P Shell Size H and L Dimensions
A MAX
B BASIC
C MAX
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
#12 CONTACT .096/.092 (2.44/2.34)
.410 (10.41)
MAX
.410 (10.41)
MAX
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
# 4-40 JACKPOST 2 PLCS.
.195 ± .003
(4.95 ± 0.08)
.485 (12.32)
MAX
790-043P DIMENSIONS
SHELL SIZE H & L
B BASIC
.265 (6.73)
MAX
Shell
Size
H
L
A Max.
In.
mm.
B Basic
In.
mm.
C Max.
In.
mm.
2.175 55.25
2.420 61.47
1.800 45.72
2.036 51.71
1.450 36.83
1.686 42.82
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
790-043P Shell Size M Dimensions
2.575 (65.41) MAX
2.200 (55.88)
1.745 (44.32) MAX
.470
.470
(11.94)
(11.94)
MAX
MAX
2X .150
(3.81)
MIN
F
.018/.022
.018/.022
(0.46/0.56)
(0.46/0.56)
PC
PC TAIL TAIL
LENGTH LENGTH
±.020 (0.51) (0.51)
±.020
(CODE A: .125 (3.18)
CODE
A: .125 (3.18)
CODE B" .250 (6.35)
CODE B: .250 (6.35)
.195
±.003 JACKPOST, 6-32 UNC 2-B THREAD
.195±.003
(4.95±0.08)
(4.95
±0.08)
SHOWN FOR REFERENCE
.485(12.32)
.485(12.32)
MAX
MAX
2.200 (55.88)
.270 (6.86)
MAX
#4-40 UNC-2B
X(.150) MIN DEEP 2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-9
www.glenair.com
Series 79
Straight
PCB Connectors
790-028P and 790-043P
Straight PCB Connectors
Receptacle PCB Hole Patterns
790-028P and 790-043P Receptacle PCB Hole Patterns
This section contains printed circuit
board footprints for vertical mounted
Series 79 receptacles. The contact
identification numbers are shown for
the connector mounting side of the
PC board. Contact tails are gold over
nickel plated.
Insert Arrangement
#23
#16
#12
.018-.022
.060-.064
.092-.096
0.46-0.56
1.52-1.63
2.34-2.44
790-028P AND 790-043P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
.565 (14.35)
.2825
(7.18)
A-5
PC Tail Diameter
Ø Diameter
In.
mm.
Contact
Size
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.003 M A M
3
2
1
.003 M A M
4
5
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.715 (18.16)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.270 (6.86)
.003 M A M
B-2P2
.094 ± .003
(2.39 ±0.08) 2x
A1
A2
.003 M A M
F
.175 (4.45)
.715 (18.16)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
.2075 (5.27)
.075 (1.91)
TYP
B-9
.003 M A M
.094 ± .003
(2.39 ±0.08) 2x
3
2
1
4
5
.003 M A M
6
8
7
9
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.865 (21.97)
.2075 (5.27)
C-13
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
2
1
3
4
5
6
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.003 M A M
7
.003 M A M
8
9 10
.0375 (0.95)
TYP
11
12
13
.0325 (0.83)
TYP
.065 (1.65)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-10
Series 79
Straight
PCB Connectors
790-028P and 790-043P
Straight PCB Connectors
Receptacle PCB Hole Patterns
Insert Arrangement
790-028P AND 790-043P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
.965 (24.51)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 15x)
.220 (5.59)
D-15
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
3
2
1
4
5
7
6
.003 M A M
8
.003 M A M
10
9
13 14
12
11
15
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.965 (24.51)
.3075 (7.81)
D-3P3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
.175 (4.45)
2x
.003 M A M
.094 ± .003
(2.39 ±0.08) 2x
A1
A3
A2
.003 M A M
.965 (24.51)
D-7P2
.094 ± .003
(2.39 ±0.08) 2x
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.4075 (10.35)
.2275 (5.78)
.410 (10.41)
.075 (1.91)
TYP
1
A1
2
.003 M A M
3
A2
.003 M A M
4
5
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.0375 (0.95)
TYP
.003 M A M
.0325 (0.83)
TYP
.065 (1.65)
1.115 (28.32)
.445 (11.30)
.278 (7.06)
E-11P2
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
3
2
1
A1
4
.003 M A M
F
A2
.003 M A M
5
7
6
8
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
9
.0375
(0.95)
.003 M A M
TYP
.0325 (0.83)
TYP
.065 (1.65)
.559 (14.20)
1.115 (28.32)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 19x)
.220 (5.59)
E-19
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
1
2
3
4
5
6
7
8
.003 M A M
10
9
.003 M A M
11 12
13 14
15 16
17 18
19
.0375 (0.95)
TYP
.0325 (0.83)
TYP
.065 (1.65)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-11
www.glenair.com
Series 79
Straight
PCB Connectors
790-028P and 790-043P
Straight PCB Connectors
Receptacle PCB Hole Patterns
Insert Arrangement
790-028P AND 790-043P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 4x)
1.115 (28.32)
.5575 (14.16)
E-7P3
.094 ± .003
(2.39 ±0.08) 2x
.175 (4.45)
2x
1
A2
A1
.003 M A M
2
A3
.003 M A M
4
3
.0375 (0.95)
TYP
.1225 (3.11)
.595 (15.11)
1.265 (32.13)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.445 (11.30)
.2805 (7.13)
F-15P2
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
1
A1
3
2
4
5
6
.0325 (0.83)
TYP
.065 (1.65)
.003 M A M
A2
.003 M A M
7
8
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
13
10 11 12
9
.0375 (0.95)
TYP
.704 (17.88)
.003 M A M
.0325 (0.83)
TYP
.065 (1.65)
1.265 (32.13)
.220 (5.59)
F-23
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
3
2
1
4
5
6
7
8
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.003 M A M
10 11 12
9
.003 M A M
13 14
15 16
17 18
19
20
21 22 23
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
1.265 (32.13)
F
.2825 (7.18)
F-5P5
.094 ± .003
(2.39 ±0.08) 2x
A1
A4
A3
A2
A5
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.175 (4.45)
4x
.003 M A M
1.215 (30.86)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.195 (4.95)
.075 (1.91) TYP
G-33
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
1
2
3
13 14
24 25
4
5
15 16
26 27
6
7
17 18
28 29
8
19
30
9
20
31
.003 M A M
10 11 12
21 22 23
32 33
.0375 (0.95)
TYP
.065 (1.65)
TYP
.130(3.30)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-12
Series 79
Straight
PCB Connectors
790-028P and 790-043P
Straight PCB Connectors
Receptacle PCB Hole Patterns
Insert Arrangement
790-028P AND 790-043P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
1.800 (45.72)
.428 (10.87)
H-10P4
.125 ± .003
(3.18 ±0.08) 2x
.0375 (0.95)
TYP
.075 (1.91)
TYP
2
1
A2
A1
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 6x)
A3
3
.003 M A M
6
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 4x)
.003 M A M
.472 (11.99)
.944 (23.98)
1.800 (45.72)
.290 (7.37)
H-29P7
.125 ± .003
(3.18 ±0.08) 2x
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX
DIA CONTACT 22x)
.175 (4.45) TYP
.075 (1.91)
.050 (1.27)
TYP
2
3
1
5
6
A1
8
11
14
12
10
A2
17
15
18
16
13
20
A7
A6
.003 M A M
1.800 (45.72)
H-36P2
.125 ± .003
(3.18 ±0.08) 2x
.0375 (0.95)
TYP
.075 (1.91)
TYP
3
2
1
A1
.003 M A M
18
19
26 27
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 34x)
.003 M A M
4
20
5
7
6
13 14
10 11 12
9
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 7x)
.100 (2.54)
TYP
.175 (4.45) 6x
.428 (10.87)
21
22
19
A5
A4
A3
.375 (9.53)
.043 (1.09) TYP
.100 (2.54)
.057 (1.45)
.003 M A M
9
7
4
.065 (1.65)
A4
5
4
.236 (5.99)
.0325 (0.83) TYP
.003 M A M
30
31
.065 (1.65) TYP
8
15 16
21 22 23
28 29
A2
17
24 25
32 33
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 2x)
34
.1725 (4.38)
.003 M A M
.944 (23.98)
1.800 (45.72)
.320 (8.13)
H-54P2
.125 ± .003
(3.18 ±0.08) 2x
1
2
.0375 (0.95)
TYP
.075 (1.91)
TYP
3
4
5
6
15 16
A1
.003 M A M
28 29
18
17
30
40 41 42
31
43
19
21
20
45
10 11 12
9
8
24
22 23
34 35 36
32 33
44
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 52x)
.003 M A M
7
46
47
.0325 (0.83) TYP
37
25
38
48 49 50
.0325 (0.83) TYP
.065 (1.65) TYP
13 14
27
26
A2
39
51 52
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.0925 (2.35)
.003 M A M
1.160 (29.46)
1.800 (45.72)
.428 (10.87)
.125 ± .003
(3.18 ±0.08) 2x
H-5P5
A1
A2
A3
A4
A5
.003 M A M
.236 (5.99)
4x
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 5x)
.944 (23.98)
.003 M A M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-13
www.glenair.com
F
Series 79
Straight
PCB Connectors
790-028P and 790-043P
Straight PCB Connectors
Receptacle PCB Hole Patterns
Insert Arrangement
790-028P AND 790-043P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
1.800 (45.72)
.300 (7.62)
H-66
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 66x)
.0375 (0.95)
TYP
.125 ± .003
(3.18 ±0.08) 2x
3
2
1
19
17 18
4
20
5
.003 M A M
7
6
21 22 23
8
10 11 12
9
26 27
24 25
30
28 29
31
.0325 (0.83) TYP
.065 (1.65) TYP
15 16
13 14
32 33
.003 M A M
34 35
50 51
36 37
52 53
38 39
54 55
40
56
41
57
42
58
43 44
59 60
45
46 47
62 63
61
48 49
64 65 66
.1725 (4.38)
.075 (1.91) TYP
1.615 (41.02)
.003 M A M
.150 (3.81)
.2575 (6.54)
J-17P4
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
A1
1
A2
3
2
4
5
7
6
A4
A3
.003 M A M
8
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
13
10 11 12
9
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95)
TYP
1.100 (27.94)
.175 (4.45)
.003 M A M
1.615 (41.02)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.395 (10.03)
.2575 (6.54)
J-25P2
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
1
A1
3
2
4
.003 M A M
5
8
7
6
10 11 12
9
A2
.003 M A M
15 16
13 14
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
19
17 18
20
21 22 23
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95) TYP
1.100 (27.94)
.003 M A M
1.615 (41.02)
.2075 (5.27)
F
J-33
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
1
3
2
4
5
.003 M A M
8
7
6
10 11 12 13 14
9
15 16
17
.003 M A M
18
19
20
21 22 23
24
25
26 27 28 29
30
31 32 33
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95) TYP
1.615 (41.02)
.2825 (7.18)
J-7P7
.094 ± .003
(2.39 ±0.08) 2x
A3
A2
A1
A5
A4
A7
A6
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.175 (4.45) 6x
.003 M A M
2.015 (51.18)
.4325 (10.99)
K-27P4
.094 ± .003
(2.39 ±0.08) 2x
A1
A2
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.0375 (0.95)
TYP
.075 (1.91)
TYP
.595 (15.11)
1
2
3
4
5
6
.003 M A M
7
8
9
10 11
12
A3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
.003 M A M
A4
.003 M A M
13 14
.2575 (6.54)
15 16
17
18
19
20
21 22 23
1.150 (29.21)
1.500 (38.1)
.0325 (0.83)
TYP
.065 (1.65)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-14
Series 79
Straight
PCB Connectors
790-028P and 790-043P
Straight PCB Connectors
Receptacle PCB Hole Patterns
Insert Arrangement
790-028P AND 790-043P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.4075 (10.35)
.2575 (6.54)
K-35P2
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
.075 (1.91)
TYP
2
1
A1
3
6
5
4
7
8
10 11 12 13 14
9
15 16
17
A2
.003 M A M
18
19
20
21 22 23
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
24
25
26 27 28 29
30
31 32 33
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95) TYP
1.500 (38.1)
.003 M A M
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 43x)
.0375 (0.95) TYP
K-43
.220 (5.59)
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
2
1
3
5
4
6
7
8
9
10 11
.065 (1.65) TYP
15 16
12 13 14
17
18
19
20
21 22
.003 M A M
23
28
24 25 26 27
29 30 31
32
33 34 35
36
37 38 39 40 41
42
43
.0325 (0.83)
TYP
2.015 (51.18)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 9x)
.3075 (7.81)
K-9P9
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
A1
A3
A2
.003 M A M
A5
A4
A7
A6
A8
A9
.175 (4.45)
2.036 (51.71)
.428 (10.87)
.125 ± .003
(3.18 ±0.08) 2x
L-6P6
A1
A2
A3
A4
A6
A5
.003 M A M
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 6x)
.236 (5.99)
5x
.003 M A M
.3055 (7.76)
.075 (1.91) TYP
2.036 (51.71)
.038 (.97)
TYP
L-78
.125 ± .003
(3.18 ±0.08) 2x
.065 (1.65)
TYP
1
19
40
58
39
20
.003 M A M
.0325 (.83)
TYP
78
59
(HOLE TO ACCEPT
#23 CONTACT 78x)
.003 M A M
.350 (8.89)
.065 (1.65)
TYP
.075 (1.91) TYP
2.200 (55.88)
.038 (.97)
TYP
M-102
.125 ± .003
(3.18 ±0.08) 2x
.003 M A M
1
21
42
62
83
.0325 (.83)
TYP
20
41
61
82
102
(HOLE TO ACCEPT
#23 CONTACT 102x)
.003 M A M
.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-15
www.glenair.com
F
Series 79
Straight
PCB Connectors
790-029S
Straight PCB Terminated
Panel Mount Plugs, Socket Contacts
How To Order
790-029S Straight PCB Panel Mount Plugs
socket contacts with STRAIGHT PCB TERMINATION
Lightweight, rugged vertical mount headers feature gold-plated PC
tail contacts for thru-hole printed circuit board termination. 790-029S
connectors are designed for rear-panel mounting and are supplied with
conductive panel gaskets. Contacts are permanently installed and are
sealed with epoxy. Shells are aluminum alloy. Threaded board mounting
holes and integral standoffs simplify installation. Available in 29 different
contact arrangements, these connectors feature size #23 signal contacts
along with #16 and #12 power contacts for up to 23 amps current rating.
Optional EMI spring improves shell-to-shell conductivity and shielding
performance. Stainless steel jackposts are non-removable.
How To Order
790-029S
K-43
Part Number
Shell Size Insert
Arrangements
See Table 1
790-029S
for Available
Rear Panel Mounted
Insert
Plug with Straight PC Tail
Contacts for Termination Arrangements
to Backplanes or Flexible
Circuits
F
Sample Part Number
M
E
Shell Finish
EMI Spring
M
Electroless Nickel
general purpose
applications
P
N
No Spring
a
N
No Hardware
MT
Nickel-PTFE
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
Additional shell
finishes are listed
on page C-9.
.125 Inch (3.2 mm.)
B
.250 inch (6.4 mm.)
EMI
SPRING
1000 Hour Grey™
maximum corrosion
protection and
durability
(non-reflective grey)
G
Guide Pin
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
Hardware Option PC Tail Length
E
EMI Spring
B
PC TAIL
LENGTH
P
Female Jackpost
S
Female Guide Socket
Materials and Finishes
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated, with stainless steel hoods
Liquid crystal polymer (LCP)
300 series stainless steel
Fluorosilicone, conductive
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-16
Series 79
Straight
PCB Connectors
790-029S
Straight PCB Terminated
Panel Mount Plugs, Socket Contacts
How To Order
Table I Contact Arrangements
CROSS-SECTIONAL VIEW OF 790-029S
Contact
Quantity
Layout
A-5
#23 #16 #12
5
2
B-2P2
B-9
9
C-13
13
D-15
15
EMI GASKET
.025 (0.64)
INSULATOR
EPOXY
EMI SPRING
CONTACT SOCKET
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
SHELL
.007
(0.18)
3
TABLE 2 HARDWARE OPTION
F-15P2 13 2
F-23
.183 (4.65)
Face View
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
H-54P2 52 2
5
H-5P5
H-66
66
N
P
No Mating Hardware
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and
L have #4-40 UNC thread, other sizes have
#2-56 thread.
J-17P4 13 4
J-25P2 23 2
J-33
33
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
S
Guide Sockets
Connector is supplied with stainless steel
non-removable guide pins. Mates with
type "S" guide sockets on corresponding
receptacle connector.
9
K-9P9
G
Guide Pins
Connector is supplied with stainless steel
non-removable bushings. Mates with type
"G" guide pins on corresponding receptacle
connector.
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-17
www.glenair.com
F
Series 79
Straight
PCB Connectors
790-029S
Straight PCB Terminated
Panel Mount Plugs, Socket Contacts
Dimensions
790-029S Shell Size A, B, C, D, E, F, J and K Dimensions
A MAX
CONTACT TAIL DIA
#23 CONTACT
.018/.022 (0.46/0.56)
#16 CONTACT
.060/.064 (1.52/1.63)
B BASIC
.233 (5.92)
MAX
C BASIC
D MAX
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST
SHOWN FOR
REFERENCE.
BLIND MATE
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
.158 (4.01)
.335 (8.51)
MAX
.510 (12.95)
MAX
.093 ± .005
(2.36 ± 0.13)
E MAX
C BASIC
.215 (5.46)
MAX
.485 (12.32)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
F
790-029S SIZE A-F, J, K DIMENSIONS
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
1.211
1.361
1.511
1.611
1.761
30.76
34.57
38.38
40.92
44.73
1.911 48.54
2.261 57.43
2.661 67.59
B Basic
In . mm.
.925
1.075
1.225
1.325
1.475
23.50
27.31
31.12
33.66
37.47
1.625 41.28
1.975 50.17
2.375 60.33
C Basic
In.
mm.
.565
.715
.865
.965
1.115
14.35
18.16
21.97
24.51
28.32
1.265 32.13
1.615 41.02
2.015 51.18
D Max.
In.
mm.
.335
.485
.635
.735
.885
8.51
12.32
16.13
18.67
22.48
1.035 26.29
1.390 35.31
1.795 45.59
E Max.
In.
mm.
.760
.910
1.060
1.160
1.310
19.30
21.11
26.92
29.46
33.27
1.460 37.08
1.810 45.97
2.210 56.13
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-18
Series 79
Straight
PCB Connectors
790-029S
Straight PCB Terminated
Panel Mount Plugs, Socket Contacts
Dimensions
790-029S Shell Size G Dimensions
1.861 (47.27) MAX
BLIND MATE
1.575 (40.01) BASIC
1.215 (30.86) BASIC
1.010 (25.65) MAX
.158 (4.01)
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
.320 (8.13)
MAX
JACKPOST SHOWN
FOR REFERENCE.
.335 (8.51)
MAX
.018/.022
(0.46/0.56)
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
.510 (12.95)
MAX
.093 ± .005
(2.36 ± 0.13)
1.410 (35.81)
MAX
1.215 (30.86) BASIC
.215 (5.46)
MAX
.575 (14.61)
MAX
F
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-19
www.glenair.com
Series 79
Straight
PCB Connectors
790-029S
Straight PCB Terminated
Panel Mount Plugs, Socket Contacts
Dimensions
790-029S Shell Size H & L Dimensions
F MAX
G BASIC
H BASIC
J MAX
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
#12 CONTACT .096/.092 (2.44/2.34)
.349 (8.86)
MAX
BLIND MATE
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
JACKPOST SHOWN FOR
REFERENCE. SEE DETAIL ‘A’
.158 (4.01)
.335 (8.51)
.510 (12.95)
MAX
MAX
.093 ± .005
(2.36 ± 0.13)
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
K MAX
H BASIC
.265 (6.73)
MAX
.600 (15.24)
MAX
790-029S SIZE H & L DIMENSIONS
Shell
Size
H
L
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
F Max.
In.
mm.
G Basic
In.
mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
2.045 51.94
2.281 57.94
790-029S Shell Size M Dimensions
3.085 (78.36) MAX
F
2.770 70.36) BASIC
2.200 (55.88) BASIC
.150 (3.81)
MIN.
2X
1.675 (42.65) MAX.
.660
(16.76)
MAX
2X 6-32 UNC-2B
X .150 (3.81) MIN
.407 (10.34)
MAX.
JACKPOST SHOWN FOR REFERENC E
SEE TABLE I (DWG. SHEET #1 )
BLIND MATE
.093±.005
(2.36±0.13)
.158 (4.01)
.335 (8.51)
MAX.
.510 (12.96)
MAX.
2.485 MAX.
.320 (8.13)
MAX.
2.200 (55.88) BASIC
SHELL SIZE M
+/- .050 (1.27) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
4-40 UNC-2B
X (.150) MIN DEEP.
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-20
Series 79
Straight
PCB Connectors
790-044S
Straight PCB Terminated
Free Standing Plugs, Socket Contacts
How To Order
790-044S Straight PCB Free-Standing Plugs
Socket Contacts with STRAIGHT PCB TERMINATION
Free-standing, rugged vertical mount headers feature gold-plated PC tail contacts
for thru-hole printed circuit board termination. Contacts are permanently installed
and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting
holes and integral standoffs simplify installation. Available in 29 different contact
arrangements, these connectors feature size #23 signal contacts along with #16 and
#12 power contacts for up to 23 amps current rating. Optional EMI spring improves
shell-to-shell conductivity and shielding performance. Stainless steel jackposts are
non-removable.
How To Order
Sample Part Number
790-044S
D-15
MT
E
P
B
Part Number
Shell Size Insert
Arrangements
Shell Finish
EMI Spring
Hardware Option
PC Tail Length
See Table 1
790-044S
Plug with Straight Thru- for Available
Insert
Hole PC Tail Contacts
Arrangements
for Termination to
Backplanes or Flexible
Circuits
M
Electroless Nickel
general purpose
applications
E
N
MT
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
Additional shell
finishes are listed on
page C-9.
EMI
SPRING
B
.250 inch (6.4 mm.)
N
No Hardware
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
.125 Inch (3.2 mm.)
No Spring
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and
durability
(non-reflective grey)
a
EMI Spring
F
P
PC TAIL
LENGTH
Female Jackpost
Materials and Finishes
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
Jackposts
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
300 series stainless steel
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-21
www.glenair.com
Series 79
Straight
PCB Connectors
790-044S
Straight PCB Terminated
Free Standing Plugs, Socket Contacts
How To Order
Table I Contact Arrangements
CROSS-SECTIONAL VIEW OF 790-044S
Contact
Quantity
Layout
A-5
#23 #16 #12
5
INSULATOR
EPOXY
Face View
EMI SPRING
CONTACT SOCKET
PC TAIL
2
B-2P2
B-9
9
C-13
13
D-15
15
SHELL
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
TABLE 2 HARDWARE OPTION
3
F-15P2 13 2
F-23
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
N
P
No Mating Hardware
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and
L have #4-40 UNC thread, other sizes have
#2-56 thread.
2
H-54P2 52 2
F
5
H-5P5
H-66
66
J-17P4 13 4
J-25P2 23 2
J-33
33
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-22
Series 79
Straight
PCB Connectors
790-044S
Straight PCB Terminated
Free Standing Plugs, Socket Contacts
Dimensions
790-044S Shell Size A, B, C, D, E, F, J and K Dimensions
A MAX
B BASIC
C MAX
.233 (5.92)
MAX
CONTACT TAIL DIA
#23 CONTACT
.018/.022 (0.46/0.56)
#16 CONTACT
.060/.064 (1.52/1.63)
.308 (7.82) MAX
#2-56 JACKPOST
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.183 ± .003
(4.65 ± 0.08)
.485 (12.32)
MAX
B BASIC
790-044S DIMENSIONS
SHELL SIZE A-G, J, K
Shell
Size
A
B
C
D
E
F
J
K
.215 (5.46)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
A Max.
In.
mm.
B Basic
In . mm.
C Max.
In.
mm.
.785 19.94
.935 23.75
.565 14.35
.715 18.16
.335
8.51
.485 12.32
1.085
1.185
1.335
1.485
27.56
30.10
33.91
37.72
1.845 46.86
2.240 56.90
.865
.965
1.115
1.265
21.97
24.51
28.32
32.13
1.615 41.02
2.015 51.18
.635
.735
.885
1.035
16.13
18.67
22.48
26.29
1.390 35.61
1.795 45.59
790-044S Shell Size G Dimensions
F
1.435 (1.80) MAX
1.215 (30.86) BASIC
.320 (8.13)
MAX
1.010 (25.65) MAX
.018/.022
(0.46/0.56)
.395
(10.03)
MAX
#2-56 JACKPOST
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.183 ± .003
(4.65 ± 0.08)
.485 (12.32)
MAX
1.215 (30.86) BASIC
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-23
www.glenair.com
Series 79
Straight
PCB Connectors
790-044S
Straight PCB Terminated
Free Standing Plugs, Socket Contacts
Dimensions
790-044S Shell Size H & L Dimensions
A MAX
B BASIC
C MAX
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
#12 CONTACT .096/.092 (2.44/2.34)
.349 (8.86)
MAX
.410 (10.41)
MAX
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
# 4-40 JACKPOST 2 PLCS.
.183 ± .003
(4.65 ± 0.08)
.485 (12.32)
MAX
790-044S DIMENSIONS
SHELL SIZE H & L
B BASIC
.265 (6.73)
MAX
Shell
Size
H
L
A Max.
In.
mm.
B Basic
In.
mm.
C Max.
In.
mm.
2.175 55.25
2.420 61.47
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
790-044S Shell Size M Dimensions
2.575
(65.41)
MAX
F
2.200
( 55.88 )
1.675
(42.55)
MAX
.470
(11.94)
MAX
.407
(10.34)
MAX
2X .150
(3.81)
MIN.
.018/.022
(0.46/0.56)
JACKPOST, 6-32 UNC-2B THREAD
SHOWN FOR REFERENCE
SEE TABLE 1 (DWG SHEET #1)
.183±.003
(4.65±0.08)
PC TAIL LENGTH
±.020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.485
(12.32)
MAX
2.200
( 55.88 )
4-40 UNC-2B
X (.150) MIN DEEP
2 PLACES
© 2011 Glenair, Inc.
.270
(6.86)
MAX
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-24
Series 79
Straight
PCB Connectors
790-029S and 790-044S
Straight PCB Connectors
Plug PCB Hole Patterns
790-029S and 790-044S Plugs PCB Hole Patterns
This section contains printed circuit board
footprints for vertical mounted Series 79
plugs. The contact identification numbers
are shown for the connector mounting
side of the PC board. Contact tails are
gold over nickel plated.
Contact
Size
PC Tail Diameter
Ø Diameter
In.
mm.
#23
#16
#12
.018-.022
.060-.064
.092-.096
0.46-0.56
1.52-1.63
2.34-2.44
790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS
Insert
Arr.
Component Mounting Side of PCB
.565 (14.35)
.2825
(7.18)
A-5
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.003 M A M
3
2
.003 M A M
5
1
4
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.715 (18.16)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.270 (6.86)
.003 M A M
B-2P2
.094 ± .003
(2.39 ±0.08) 2x
A1
A2
.003 M A M
F
.175 (4.45)
.715 (18.16)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
.2075 (5.27)
B-9
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
3
4
5
2
1
.003 M A M
8
9
7
6
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.865 (21.97)
.2075 (5.27)
C-13
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
7
6
5
4
3
2
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.003 M A M
1
.003 M A M
13
12
11
10
9
.0375 (0.95)
TYP
8
.0325 (0.83)
TYP
.065 (1.65)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-25
www.glenair.com
Series 79
Straight
PCB Connectors
790-029S and 790-044S
Straight PCB Connectors
Plug PCB Hole Patterns
790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS
Insert
Arr.
Component Mounting Side of PCB
.965 (24.51)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 15x)
.220 (5.59)
D-15
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
7
8
3
4
5
6
2
.003 M A M
1
.003 M A M
15
14
12 11 10
13
9
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.965 (24.51)
.3075 (7.81)
D-3P3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
.175 (4.45)
2x
.003 M A M
.094 ± .003
(2.39 ±0.08) 2x
A3
A1
A2
.003 M A M
.965 (24.51)
.2275 (5.78)
D-7P2
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.4075 (10.35)
.410 (10.41)
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
3
A2
2
.003 M A M
1
A1
.003 M A M
4
5
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
F
.0375 (0.95)
TYP
.003 M A M
.0325 (0.83)
TYP
.065 (1.65)
1.115 (28.32)
.445 (11.30)
E-11P2
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
.075 (1.91)
TYP
.278 (7.06)
.094 ± .003
(2.39 ±0.08) 2x
3
4
A2
2
1
.003 M A M
A1
.003 M A M
5
6
7
8
9
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.0375
(0.95)
.003 M A M
TYP
.0325 (0.83)
TYP
.065 (1.65)
.559 (14.20)
1.115 (28.32)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 19x)
.220 (5.59)
E-19
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
10
9
8
7
6
5
4
3
2
.003 M A M
1
.003 M A M
19
18 17
16 15
14 13
.0375 (0.95)
TYP
12 11
.0325 (0.83)
TYP
.065 (1.65)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-26
Series 79
Straight
PCB Connectors
790-029S and 790-044S
Straight PCB Connectors
Plug PCB Hole Patterns
790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS
Insert
Arr.
Component Mounting Side of PCB
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 4x)
1.115 (28.32)
.5575 (14.16)
E-7P3
.094 ± .003
(2.39 ±0.08) 2x
.175 (4.45)
2x
2
A2
A3
.003 M A M
1
A1
.003 M A M
4
3
.1225 (3.11)
.0375 (0.95)
TYP
.595 (15.11)
.0325 (0.83)
TYP
.065 (1.65)
1.265 (32.13)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.445 (11.30)
.2805 (7.13)
F-15P2
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
3
4
5
6
A2
.003 M A M
1
2
A1
.003 M A M
13
12 11 10
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
7
8
9
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
.704 (17.88)
.003 M A M
1.265 (32.13)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.220 (5.59)
F-23
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
12 11 10
7
8
9
4
5
6
3
.003 M A M
2
1
.003 M A M
23 22 21
20
19
16 15
18 17
14 13
.0325 (0.83)
TYP
.065 (1.65)
.0375 (0.95)
TYP
1.265 (32.13)
.2825 (7.18)
F-5P5
.094 ± .003
(2.39 ±0.08) 2x
A4
A5
A3
A1
A2
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.175 (4.45)
4x
.003 M A M
1.215 (30.86)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.195 (4.95)
.075 (1.91) TYP
G-33
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
12
11 10
23 22 21
33 32
9
20
31
8
19
30
7
6
5
29 28
4
16 15
18 17
27 26
3
2
.003 M A M
1
14 13
25 24
.0375 (0.95)
TYP
.065 (1.65)
TYP
.130(3.30)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-27
www.glenair.com
F
Series 79
Straight
PCB Connectors
790-029S and 790-044S
Straight PCB Connectors
Plug PCB Hole Patterns
790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS
Insert
Arr.
Component Mounting Side of PCB
1.800 (45.72)
.428 (10.87)
H-10P4
.125 ± .003
(3.18 ±0.08) 2x
.0375 (0.95)
TYP
.075 (1.91)
TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 6x)
2
A2
3
.003 M A M
A1
4
5
6
.236 (5.99)
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 4x)
.003 M A M
.472 (11.99)
.944 (23.98)
1.800 (45.72)
.290 (7.37)
H-29P7
.125 ± .003
(3.18 ±0.08) 2x
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX
DIA CONTACT 22x)
.175 (4.45) TYP
.075 (1.91)
.050 (1.27)
TYP
21
18
20
22
17
A7
15
14
16
19
12
A5
9
11
8
A4
7
H-36P2
.125 ± .003
(3.18 ±0.08) 2x
.0375 (0.95)
TYP
.075 (1.91)
TYP
8 7
A2
A3
A1
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 7x)
.100 (2.54)
TYP
.003 M A M
3
4
5
14 13
2
25 24
23 22 21
33 32
31
30
18
27 26
29 28
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 2x)
.1725 (4.38)
F
.065 (1.65) TYP
A1
9
19
20
.003 M A M
.944 (23.98)
1.800 (45.72)
.320 (8.13)
H-54P2
.125 ± .003
(3.18 ±0.08) 2x
14 13
A2
27
.003 M A M
.0375 (0.95)
TYP
.075 (1.91)
TYP
12 11 10
9
26
39
25
38
52 51
24
37
8
7
21
20
36 35 34
50 49 48
47
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 52x)
.003 M A M
23 22
19
45
18
31
44
3
4
5
6
33 32
46
.0325 (0.83) TYP
1
12 11 10
.003 M A M
34
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 34x)
.003 M A M
6
16 15
17
A2
1
4
1.800 (45.72)
.428 (10.87)
2
3
5
6
10
.175 (4.45) 6x
.375 (9.53)
.043 (1.09) TYP
.100 (2.54)
.057 (1.45)
.003 M A M
13
A6
.065 (1.65)
.003 M A M
1
A3
A4
.0325 (0.83) TYP
17
30
43
2
16 15
.0325 (0.83) TYP
.065 (1.65) TYP
1
A1
29 28
42 41 40
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.0925 (2.35)
.003 M A M
1.160 (29.46)
1.800 (45.72)
.428 (10.87)
.125 ± .003
(3.18 ±0.08) 2x
H-5P5
A5
A4
A3
A2
A1
.003 M A M
.236 (5.99)
4x
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 5x)
.944 (23.98)
.003 M A M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-28
Series 79
Straight
PCB Connectors
790-029S and 790-044S
Straight PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
1.800 (45.72)
.300 (7.62)
H-66
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 66x)
.0375 (0.95)
TYP
16 15
.125 ± .003
(3.18 ±0.08) 2x
33 32
.003 M A M
31
49 48
66 65 64
30
29 28
47 46
45
63 62
44 43
41
58
3
4
5
6
23 22 21
25 24
42
60 59
7
8
9
27 26
61
.0325 (0.83) TYP
.003 M A M
12 11 10
14 13
20
18 17
35 34
51 50
53 52
55 54
56
.065 (1.65) TYP
1
19
37 36
39 38
40
57
2
.075 (1.91) TYP
1.615 (41.02)
.003 M A M
.150 (3.81)
.2575 (6.54)
J-17P4
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
A4
7
A3
3
4
5
6
2
A2
1
A1
.003 M A M
13
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
12 11 10
8
9
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95)
TYP
1.100 (27.94)
.175 (4.45)
.003 M A M
1.615 (41.02)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.395 (10.03)
.2575 (6.54)
J-25P2
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
12
A2
11 10
.003 M A M
8
9
7
5
6
3
4
2
1
A1
.003 M A M
23 22 21
20
19
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
16 15
18 17
14 13
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95) TYP
1.100 (27.94)
.003 M A M
1.615 (41.02)
.2075 (5.27)
J-33
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
17
16 15
F
.003 M A M
14 13 12 11 10
8
9
7
3
4
5
6
2
1
.003 M A M
33 32 31
30
29 28 27 26
25
24
23 22 21
20
19
18
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95) TYP
1.615 (41.02)
.2825 (7.18)
J-7P7
.094 ± .003
(2.39 ±0.08) 2x
A7
A6
A5
A4
A3
A2
A1
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.175 (4.45) 6x
.003 M A M
2.015 (51.18)
.4325 (10.99)
K-27P4
.094 ± .003
(2.39 ±0.08) 2x
A4
A3
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.0375 (0.95)
TYP
.075 (1.91)
TYP
.595 (15.11)
12
11 10
9
8
7
.003 M A M
6
5
4
3
2
1
A2
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
.003 M A M
A1
.003 M A M
23 22 21
.2575 (6.54)
20
19
18
17
16 15
14 13
1.150 (29.21)
1.500 (38.1)
.0325 (0.83)
TYP
.065 (1.65)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
F-29
www.glenair.com
Series 79
Straight
PCB Connectors
790-029S and 790-044S
Straight PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.4075 (10.35)
.2575 (6.54)
K-35P2
.003 M A M
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
14 13 12 11 10
16 15
17
A2
9
8
7
6
5
2
3
4
1
A1
.003 M A M
33 32 31
30
29 28 27 26
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
25
24
23 22 21
20
19
18
.0325 (0.83)
TYP
.065 (1.65)
TYP
.0375 (0.95) TYP
1.500 (38.1)
.003 M A M
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 43x)
.0375 (0.95) TYP
.220 (5.59)
K-43
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
22 21
20
19
17
18
16 15
.065 (1.65) TYP
11 10
14 13 12
9
8
7
6
5
2
3
4
1
.003 M A M
43
42
41 40 39 38 37
36
35 34 33
32
31 30 29
28
27 26 25 24
23
.0325 (0.83)
TYP
2.015 (51.18)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 9
.3075 (7.81)
K-9P9
.094 ± .003
(2.39 ±0.08) 2x
A8
A9
.003 M A M
.003 M A M
A7
A5
A6
A4
A3
A1
A2
.175 (4.45)
2.036 (51.71)
.428 (10.87)
F
.125 ± .003
(3.18 ±0.08) 2x
L-6P6
A6
A5
A4
A3
A2
A1
.003 M A M
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 6x)
.236 (5.99)
5x
.003 M A M
.3055 (7.76)
.075 (1.91) TYP
2.036 (51.71)
.038 (.97)
TYP
L-78
.125 ± .003
(3.18 ±0.08) 2x
.065 (1.65)
TYP
.0325 (.83)
TYP
1
19
39
.003 M A M
20
58
40
59
78
(HOLE TO ACCEPT
#23 CONTACT 78x)
.003 M A M
.350 (8.89)
.065 (1.65)
TYP
.075 (1.91) TYP
2.200 (55.88)
.038 (.97)
TYP
M-102
.125 ± .003
(3.18 ±0.08) 2x
.003 M A M
20
1
61
42
102
83
.0325 (.83)
TYP
21
41
82
62
(HOLE TO ACCEPT
#23 CONTACT 102x)
.003 M A M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
F-30
Series 79
90° PCB
Connectors
790-036P
Right Angle PCB Terminated
Panel Mount Receptacle, Pin Contacts
How To Order
790-036P Right Angle PCB Panel Mount Receptacles
PIN CONTACTS WITH RIGHT ANGLE PCB TERMINATION
Lightweight, rugged right angle headers feature gold-plated contacts for thruhole printed circuit board termination. 790-036P connectors are designed for
rear-panel mounting and are supplied with conductive panel gaskets. Contacts
are permanently installed and are sealed with epoxy. Shells are aluminum alloy.
Threaded board mounting holes and integral standoffs simplify installation. EMI
shroud improves EMI performance. Fluorosilicone face seal provides watertight
interface. Available in 29 different contact arrangements, these connectors
feature size #23 signal contacts along with #16 and #12 power contacts for up to
23 amps current rating.
HOW TO ORDER
Sample Part Number
790-036P
D-7P2
MT
P
A
Part Number
Shell Size Insert
Arrangements
Shell Finish
Hardware Option
PC Tail Length
790-036P
Rear-Panel Mounted
Receptacle with 90° PC
Tail Pin Contacts for
Termination to Backplanes
or Flexible Circuits
See Table 1 for
Available Insert
Arrangements
M
A
Electroless Nickel
.125 Inch (3.2 mm.)
N
general purpose applications
No Hardware
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
G
Guide Pin
PC TAIL
LENGTH
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
B
.250 inch (6.4 mm.)
P
Female Jackpost
G
Additional shell finishes
are listed on page C-9.
S
Female Guide Socket
SPECIFICATIONS
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
MATERIALS AND FINISHES
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
Interfacial Seal
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-1
www.glenair.com
Series 79
90° PCB
Connectors
790-036P
Right Angle PCB Terminated
Panel Mount Receptacle, Pin Contacts
How To Order
Table I Contact Arrangements
Layout
A-5
Contact
Quantity
#23 #16 #12
5
B-2P2
9
C-13
13
D-15
15
D-3P3
Face View
LCP INSULATOR
EMI GASKET
.025 (0.64)
CONTACT PIN
EMI COVER
LCP TRAY
3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
3
F-15P2
13
2
F-23
23
F-5P5
INTERFACIAL SEAL
.007
(0.18)
TABLE 2
HARDWARE OPTION
5
G-33
33
H-10P4
6
H-29P7 22
4
7
H-36P2 34
H-54P2 52
2
2
H-5P5
G
.195 (4.95)
EPOXY
2
B-9
CROSS-SECTIONAL VIEW OF 790-036P
5
H-66
66
J-17P4
13
4
J-25P2
23
2
J-33
33
J-7P7
N
P
No Mating Hardware
Jackposts
Connector is supplied with blind,
tapped holes. Shell sizes H and L
have 6-32 UNC-2B thread, other
sizes are #4-40. Minimum thread
depth is .150" (3.81).
Connector is supplied with nonremovable jackposts. Shell sizes
H and L have #4-40 UNC-2B
thread, other sizes have #2-56
thread.
7
K-27P4
23
4
K-35P2
33
2
K-43
43
K-9P9
9
L-6P6
6
L-78
78
M-102
102
G
S
Male Guide Pins
Female Guide Sockets
Connector is supplied with
stainless steel guide pins to mate
with code S guide sockets. Pins
are non-removable.
Connector is supplied with
stainless steel guide sockets to
mate with code G guide pins.
Sockets are non-removable.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-2
Series 79
90°°° PCB
Connectors
790-036P
Right Angle PCB Terminated
Panel Mount Receptacle, Pin Contacts
Dimensions
790-036P Shell Sizes A-F, J and K Dimensions
BLIND MATE
A MAX
.228 (5.79)
MIN
B BASIC
.308 (7.82)
MAX
C BASIC
D MAX
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
.078 (1.98)
MIN
.500 (12.70)
MAX
2-56 UNC-2B
X .150 (3.81) MIN
2 PLACES
JACKPOST SHOWN
FOR REFERENCE.
.170 (4.32)
.335 (8.51)
MAX
435 (11.05)
MAX
2-56 UNC-2B
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.560 (14.22)
MAX
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
C BASIC
E MAX
G
790-036P SHELL SIZES A-F, J AND K
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
B Basic
In.
mm.
C Basic
In.
mm.
D Max.
In.
mm.
E Max.
In.
mm.
1.211
1.361
1.511
1.611
1.761
30.76
34.57
38.38
40.92
44.73
.925
1.075
1.225
1.325
1.475
23.50
27.31
31.12
33.66
37.47
.565
.715
.865
.965
1.115
14.35
18.16
21.97
24.51
28.32
.401
.551
.701
.801
.951
10.19
14.00
17.81
20.35
24.16
.805
.955
1.105
1.205
1.355
20.45
24.26
28.07
30.61
34.42
1.911
2.261
2.661
48.54
57.43
67.59
1.625
1.975
2.375
41.28
50.17
60.33
1.265
1.615
2.015
32.13
41.02
51.18
1.101
1.460
1.860
27.96
37.08
47.24
1.505
1.855
2.255
38.23
47.12
57.28
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-3
www.glenair.com
Series 79
90° PCB
Connectors
790-036P
Right Angle PCB Terminated
Panel Mount Receptacle, Pin Contacts
Dimensions
790-036P Shell Size G Dimensions
1.855 (47.12) MAX
.228 (5.79)
MIN
1.575 (40.01) BASIC
1.215 (30.86) BASIC
.078 (1.98)
MIN
.387 (9.83)
MAX
1.079 (27.41) MAX
.620 (15.75)
MAX
2-56 UNC-2B
X .150 (3.81) MIN
2 PLACES
JACKPOST SHOWN
FOR REFERENCE.
.170 (4.32)
.335 (8.51)
MAX
.510 (12.95)
TYP
2-56 UNC-2B
2 PLACES
.018/.022
(0.46/0.56)
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.630 (16.00)
MAX
1.215 (30.86) BASIC
1.450 (36.83)
MAX
BLIND MATE
G
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-4
Series 79
90°°° PCB
Connectors
790-036P
Right Angle PCB Terminated
Panel Mount Receptacle, Pin Contacts
Dimensions
790-036P Shell Sizes H and L Dimensions
#2-56 FLAT
HEAD SCREW
#2-56
FLATHEAD
SCREW
790-036P SHELL SIZES H AND L
Shell
Size
H
L
MAX
FF MAX
BASIC
GGBASIC
BASIC
HHBASIC
JJ
.170
(4.32)
.170
(4.32)
4-40
.150
(3.81)
4-40UNC-2B
UNC-2B X X
.150
(3.81)
MIN MIN
PLACES
2 2PLACES
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.450 36.83
1.686 42.82
2.175 55.25
2.411 61.24
.288 (6.05)
PC
TAIL
LENGTH
PC TAIL
LENGTH
± .020 (0.51)
±.020
(0.51)
CODE A: .125 (3.18)
CODE
.125
(3.18)
CODE B:A:
.250
(6.35)
CODE B: .250 (6.35)
CONTACT TAILTAIL
DIA DIA.
CONTACT
#23 CONTACT .018/.022 (0.46/0.56)
#23
CONTACT
0.18/.022
#16 CONTACT
.060/.064
(1.52/1.63)(0.46/0.56)
#12 CONTACT
.096/.092
(2.44/2.34)(1.52/1.63)
#16
CONTACT
.060/.064
#12 CONTACT .096/.092 (2.44/2.34)
JACKPOST
JACKPOST SHOWN
SHOWN FOR
FOR REFERENCE
REFERENCE.
.5075 (12.89)
.700 (17.78)
(17.78)
.700
TYP
MAX
.300
(7.62)
.300
(7.62)
MAX
MAX
4-40UNC-2B
UNC-2B
4-40
PLACES
2 2PLACES
G Basic
In . mm.
MIN MIN
.288 (6.05)
.088
.088
(2.24)
(2.24)
.415
(10.54)
.415 (10.54)
MAX
MAX
.620
.620 (15.75)
(15.75)
MAX
MAX
.320
.320(8.13)
(8.13)
MAX
MAX
F Max.
In.
mm.
BLIND MATE
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
BASIC
HHBASIC
MAX
KK MAX
790-036P Shell Size M Dimensions
2X #2-56 FLATHEAD SCREW
3.085 (78.36 MAX)
2.770 (70.36) BASIC
2.200 (55.88) BASIC
1.745 (44.32) MAX
.5825
(14.80)
BASIC
2X 6-32 UNC-2B
X .150 (3.81) MIN
.078
(1.98)
.350 (889)
MAX
.170 (4.32)
.680
(17.27)
MAX
.470
(11.94)
MAX
GUIDE PIN SHOWN FOR
REFERENCE
.250
(6.35)
MIN
PC TAIL LENGTH
±.020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.018/.022 (0.46/0.56)
.350 (889) MAX
BLIND MATE
.775
(19.69)
MAX
© 2011 Glenair, Inc.
SHELL SIZE M
+/- .050 (1.27) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
2X 4-40 UNC-2B
2.200 (55.88) BASIC
2.575 (65.41) MAX
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-5
www.glenair.com
G
Series 79
90° PCB
Connectors
790-041P
Right Angle PCB Terminated
Free-Standing Receptacle, Pin Contacts
How To Order
790-041P Right Angle Free-Standing Receptacles
PIN CONTACTS WITH RIGHT ANGLE PCB TERMINATION
Lightweight, rugged right angle headers feature gold-plated contacts for thruhole printed circuit board termination. 790-041P connectors are free-standing
(not for panel mounting) and mate to 790-025S cable plugs. Contacts are
permanently installed and are sealed with epoxy. Shells are aluminum alloy.
Threaded board mounting holes and integral standoffs simplify installation.
EMI shroud improves EMI performance. Fluorosilicone face seal provides
watertight interface. Available in 29 different contact arrangements, these
connectors feature size #23 signal contacts along with #16 and #12 power
contacts for up to 23 amps current rating.
HOW TO ORDER
Sample Part Number
790-041P
J-25P2
M
P
A
Part Number
Shell Size Insert
Arrangements
Shell Finish
Hardware Option
PC Tail Length
790-041P
Header Receptacle
with 90° PC Tail Pin
Contacts for Termination
to Backplanes or Flexible
Circuits
See Table 1 for
Available Insert
Arrangements
M
A
Electroless Nickel
.125 Inch (3.2 mm.)
general purpose applications
B
MT
Nickel-PTFE
N
No Hardware
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
PC TAIL
LENGTH
ZNU
Zinc-Nickel with Black
Chromate
P
tactical applications
(non-reflective black)
G
.250 inch (6.4 mm.)
Female Jackpost
Additional shell finishes are
listed on page C-9.
SPECIFICATIONS
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
MATERIALS AND FINISHES
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
EMI Shroud
Interfacial Seal
Jackposts
Tray
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Aluminum alloy
Flourosilicone rubber
300 series stainless steel
Thermoplastic
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-6
Series 79
90° PCB
Connectors
790-041P
Right Angle PCB Terminated
Free-Standing Receptacle, Pin Contacts
How To Order
Table I Contact Arrangements
CROSS-SECTIONAL VIEW OF 790-041P
Contact
Quantity
Layout
A-5
#23 #16 #12
5
B-9
9
C-13
13
D-15
15
INTERFACIAL SEAL
INSULATOR
PIN CONTACT
EPOXY
EMI SHROUD
2
B-2P2
Face View
SHELL
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
TABLE 2 HARDWARE OPTION
3
F-15P2 13 2
F-23
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
H-54P2 52 2
P
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and
L have #4-40 UNC thread, other sizes have
#2-56 thread.
5
H-5P5
H-66
N
No Mating Hardware
66
J-17P4 13 4
J-25P2 23 2
J-33
33
G
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-7
www.glenair.com
Series 79
90° PCB
Connectors
790-041P
Right Angle PCB Terminated
Free-Standing Receptacle, Pin Contacts
Dimensions
790-041P Shell Sizes A-F, J and K Dimensions
790-041P SHELL SIZES A-F, J AND K
A MAX
.167 (4.95)
.228 (5.79)
MIN
.308 (7.82)
MAX
B BASIC
.078 (1.98)
MIN
C MAX
.430 (12.70)
(10.92)
.500
MAX
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
B Basic
In.
mm.
C Max.
In.
mm.
.805 20.45
.565 14.35
.401 10.19
.955 24.26
1.105 28.07
.715 18.16
.865 21.97
.551 14.00
.701 17.81
1.205 30.61
1.355 34.42
1.505 38.23
.965 24.51
1.115 28.32
1.265 32.13
.801 20.35
.951 24.16
1.101 27.96
1.855 47.12
2.255 57.28
1.615 41.02
2.015 51.18
1.460 37.08
1.860 47.24
JACKPOST, #2-56
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.195 (4.95)
2-56 UNC-2B
2 PLACES
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
.540 (13.72)
MAX
.410 (10.41)
B BASIC
A MAX
790-041P Shell Size G Dimensions
.228 (5.79)
MIN
1.455 (36.96) MAX
.209 (5.31)
G
BASICBASIC
1.215 B
(30.86)
1.079 (27.41) MAX
.387 (9.83)
MAX
.078 (1.98)
MIN
.530 (13.46)
MAX
.195 (4.95)
JACKPOST, #2-56
.018/.022
(0.46/0.56)
.615 (15.62)
MAX
.485 (12.62)
2-56 UNC-2B
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
1.215 (30.86) BASIC
1.455 (36.96)
MAX
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-8
Series 79
90° PCB
Connectors
790-041P
Right Angle PCB Terminated
Free-Standing Receptacle, Pin Contacts
Dimensions
790-041P Shell Sizes H & L Dimensions
#2-56 FLAT
HEAD SCREW
#2-56
FLATHEAD
SCREW
AA MAX
MAX
BASIC
BB BASIC
MAX
CCMAX
.222 (5.64)
.222
(5.64)
.415
(10.54)
.415 (10.54)
MAX
MAX
.288
(6.05)
.288 (6.05)
MIN
MIN
.088
.088
(2.24)
(2.24)
.550 (13.97)
.550
(13.97)
MAX
MAX
PCTAIL
TAILLENGTH
LENGTH
PC
±
.020 (0.51)
±.020
(0.51)
CODE A: .125 (3.18)
CODEB:A:.250
.125
(3.18)
CODE
(6.35
CODE B: .250 (6.35)
JACKPOST,
#4-40
#4-40 JACKPOST
CONTACT
TAIL
CONTACT TAIL
DIA DIA.
#23 CONTACT
.018/.022
(0.46/0.56)
#23
CONTACT
0.18/.022
(0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
#16
CONTACT
.060/.064
(1.52/1.63)
#12 CONTACT .096/.092 (2.44/2.34)
#12 CONTACT .096/.092 (2.44/2.34)
.195
(4.95)
.195
(4.95)
.491
.491
(12.47)
(12.47)
.700
.700 (17.78)
(17.78)
MAX
MAX
Shell
Size
H
L
BASIC
BB BASIC
4-40UNC-2B
UNC-2B
4-40
PLCS
22PLCS
790-041P SHELL SIZES H AND L
A MAX
MAX
A
A Max.
In.
mm.
B Basic
In.
mm.
C Max.
In.
mm.
2.185 55.50
2.430 61.72
1.800 45.72
2.036 51.71
1.450 36.83
1.686 42.82
790-041P Shell Size M Dimensions
2X #2-56
FLAT
2X
#2-56
HEAD SCREW
FLATHEAD SCREW
2.575 (65.41)
BASICBASIC
2.575
(65.41)
2.200 (55.88)
BASICBASIC
2.200
(55.88)
1.745 (44.32)
MAX
1.745
(44.32)MAX
.470
.635
.470
.635
(16.13)
(11.94)
(11.94)
(16.13)
MAX.
MAX
MAX
.350 (8.89) MAX
MAX
.566
.566
(14.38)
(14.38)
BASIC
BASIC
.765
.765
(19.43)
MAX
(19.43)
BASIC
2X
6-32 UNC-2B
2X 6-32 UNC-2B
.150 (3.81)
MIN MIN
XX .150
(3.81)
JACKPOST SHOWNSHOWN
FOR REFERENC E
JACKPOST
SEE TABLE I (DWG. SHEET #1 )
FOR REFERENCE
.078
(1.98)
.170 (4.32)
.170
(4.32) .250
PC TAIL LENGTH
.250)
(6.35)
(6.35)
±.020
(0.51)
MIN
MIN
PC TAIL LENGTH
±.020
CODE
A: .125 (3.18)
CODE A: .125 (3.18)
CODE B: .250
CODE
B:(6.35)
.250 (6.35)
.018/.022
(0.46/0.56)
.018/.022
(0.46/0.56)
2X 4-40
UNC-2B
2X
4-40
UNC-2B
2.200(55.88)
(55.88) BASIC
2.200
BASIC
2.575 (65.41)
(65.41) MAXMAX
2.575
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-9
www.glenair.com
G
Series 79
90° PCB
Connectors
790-036P and 790-041P
Right Angle PCB Connectors
Receptacle PCB Hole Patterns
790-036P and 790-041P Receptacle PCB Hole Patterns
This section contains printed circuit
board footprints for right angle Series 79
receptacles. The contact identification
numbers are shown for the connector
mounting side of the PC board. Contact
tails are gold over nickel plated.
Insert
Arr.
Contact
Size
CONNECTOR ORIENTATION
#23
#16
#12
.018-.022
.060-.064
.092-.096
0.46-0.56
1.52-1.63
2.34-2.44
790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
.565 (14.35)
.2825
(7.18)
A-5
PC Tail Diameter
Ø Diameter
In.
mm.
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.003 M A M
5
.003 M A M
4
2
3
1
.075 (1.91)
TYP
.0375 (0.95)
TYP
.715 (18.16)
.270 (6.86)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.003 M A M
B-2P2
.094 ± .003
(2.39 ±0.08) 2x
A1
A2
.003 M A M
.175 (4.45)
.715 (18.16)
.3575 (9.08)
G
B-9
.075 (1.91)
TYP
.003 M A M
9
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
5
8
7
3
4
6
2
1
.075 (1.91)
TYP
.0375 (0.95)
TYP
.865 (21.97)
.4325 (10.99)
C-13
13
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
7
12
6
.075 (1.91)
TYP
5
4
3
.003 M A M
8
10 9
11
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
2
.0375 (0.95)
TYP
1
.075 (1.91)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-10
Series 79
90° PCB
Connectors
790-036P and 790-041P
Right Angle PCB Connectors
Receptacle PCB Hole Patterns
Insert
Arr.
790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
.965 (24.51)
.4825 (12.26)
D-15
.094 ± .003
(2.39 ±0.08) 2x
15
.003 M A M
8
14 13
7
12
10
3
4
5
6
.075 (1.91)
TYP
11
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 15x)
.003 M A M
9
2
1
.075 (1.91)
TYP
.0375 (0.95)
TYP
.965 (24.51)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
.4825 (12.26)
.175 (4.45)
2x
D-3P3
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
A3
A1
A2
.003 M A M
.965 (24.51)
.205 (5.21)
2X
.4825 (12.26)
D-7P2
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
5
A1
2
3
1
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.0375 (0.95)
TYP
.003 M A M
.075 (1.91)
TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
1.115 (28.32)
.5575 (14.16)
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
4
A2
.003 M A M
E-11P2
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.003 M A M
.075 (1.91)
TYP
7
8
9
5
6
A2
G
A1
.003 M A M
3
4
2
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
1
.0375 (0.95) TYP
.075 (1.91)
TYP
.2795 (7.10) 2X
.003 M A M
1.115 (28.32)
.5575 (14.16)
E-19
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
19
10
16 15
18 17
9
8
.075 (1.91)
TYP
7
6
4
.0375 (0.95)
TYP
.003 M A M
12 11
14 13
5
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 19x)
3
2
1
.075 (1.91)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-11
www.glenair.com
Series 79
90° PCB
Connectors
790-036P and 790-041P
Right Angle PCB Connectors
Receptacle PCB Hole Patterns
Insert
Arr.
790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
1.115 (28.32)
.5575 (14.16)
E-7P3
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 4x)
.175 (4.45)
2x
.094 ± .003
(2.39 ±0.08) 2x
3
4
A2
A3
.003 M A M
A1
2
1
.2975 (7.56)
2x
.0375 (0.95)
2x
.075 (1.91)
TYP
1.265 (32.13)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.6325 (16.07)
F-15P2
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
13
11 10
12
A1
6
4
5
3
2
1
.075 (1.91)
TYP
.0375 (0.95)
TYP
.352 (8.94)
2X
.003 M A M
.003 M A M
7
8
9
A2
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
1.265 (32.13)
.6325 (16.07)
F-23
23 22 21
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
.003 M A M
12 11 10
.003 M A M
20
19
16 15
18 17
7
8
9
.075 (1.91)
TYP
3
4
5
6
14 13
2
1
.075 (1.91)
TYP
.0375 (0.95)
TYP
1.265 (32.13)
.6325 (16.07)
G
F-5P5
.094 ± .003
(2.39 ±0.08) 2x
A4
A5
A2
A3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.175 (4.45)
4x
.003 M A M
1.215 (30.86)
.6075 (15.43)
33 32
G-33
A1
.003 M A M
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
23 22 21
12
11 10
31
.075 (1.91) TYP
30
20
9
29 28
19
8
27 26
16 15
18 17
7
6
5
4
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
25 24
.003 M A M
14 13
3
2
1
.0375 (0.95)
TYP
.075 (1.91)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-12
Series 79
90° PCB
Connectors
790-036P and 790-041P
Right Angle PCB Connectors
Receptacle PCB Hole Patterns
790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
Insert
Arr.
1.800 (45.72)
.900 (22.86)
.0375 (0.95)
TYP
.125 ± .003
(3.18 ±0.08) 2x
H-10P4
A4
.075 (1.91)
TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 6x)
6
.003 M A M
4
5
A3
.003 M A M
A1
A2
3
2
1
.075 (1.91)
TYP
.472 (11.99)
.236 (5.99)
TYP
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 4x)
.003 M A M
TYP
1.800 (45.72)
.290 (7.37)
.125 ± .003
(3.18 ±0.08) 2x
H-29P7
.6125
.900 (22.86)
.175 (4.45)
TYP A5
A7
A6
19
22
.003 M A M
21
16
18
20
17
15
14
A4
A3
A2
A1
.175 (4.45)
TYP
13
10
7
4
1
12
9
11
8
6
5
3
2
(HOLE TO ACCEPT
.022 (0.56) MAX
DIA CONTACT 22x)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 7x)
.050 (1.27) TYP
.075 (1.91) TYP
.003 M A M
.003 M A M
.075 (1.91) TYP
.100 (2.54) TYP
1.800 (45.72)
.900 (22.86)
33 32
34
H-36P2
.125 ± .003
(3.18 ±0.08) 2x
31
16 15
17
7
8
30
6
18
12 11 10
4
5
19
20
14 13
3
.0375 (0.95)
2
.075 (1.91) TYP
.003 M A M
27 26
29 28
23 22 21
25 24
A2
.003 M A M
.1725 (4.38)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 34x)
.075 (1.91)
TYP
A1
9
1
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 2x)
.472 (11.99)
.003 M A M
.944 (23.98)
1.800 (45.72)
.580 (14.73)
.900 (22.86)
52
H-54P2
.125 ± .003
(3.18 ±0.08) 2x
51 50
39
A2
27
.003 M A M
26
14
13
38
49
37
25
48
47 46
34
36 35
24 23
12 11 10
22
9
45
33 32
21
8
20 19
7
6
30
31
18
17
4
5
.075 (1.91) TYP
41 40
43 42
44
29 28
A1
16 15
3
2
.075 (1.91) TYP
.003 M A M
G
1
.0375 (0.95) TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 52x)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.003 M A M
1.160 (29.46
1.800 (45.72)
.900 (22.86)
H-5P5
.125 ± .003
(3.18 ±0.08) 2x
A5
A4
A3
A2
A1
.003 M A M
.236 (5.99)
4x
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 5x)
.003 M A M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-13
www.glenair.com
Series 79
90° PCB
Connectors
790-036P and 790-041P
Right Angle PCB Connectors
Receptacle PCB Hole Patterns
Insert
Arr.
790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
1.800 (45.72)
.900 (22.86)
.075 (1.91) TYP
66 65 64
H-66
.125 ± .003
(3.18 ±0.08) 2x
49 48
.003 M A M
33 32
63 62
47 46
31
16 15
30
61
45
60 59
44 43
42
27 26
29 28
57
41
56
.0375 (0.95)
TYP
20
19
3
4
5
6
35 34
37 36
23 22 21
7
8
9
51 50
53 52
55 54
39 38
40
25 24
11 10
12
14 13
58
18 17
2
1
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 66x)
.075 (1.91) TYP
.003 M A M
1.615 (41.02)
J-17P4
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
13
A4
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.3725 (9.46)
.8075 (20.51)
.003 M A M
12 11 10
8
9
A3
A1
A2
.003 M A M
7
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
3
4
5
6
1
2
.0375 (0.95)
TYP
.075 (1.91)
TYP
.175 (4.45)
TYP
.003 M A M
1.615 (41.02)
.5475 (13.91)
.8075 (20.51)
.075 (1.91) TYP
J-25P2
.094 ± .003
(2.39 ±0.08) 2x
23 22 21
20
19
16 15
18 17
14 13
A2
A1
.003 M A M
12 11 10
8
9
7
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
3
4
5
6
2
1
.075 (1.91)
TYP
.0375 (0.95) TYP
.003 M A M
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
1.615 (41.02)
.8075 (20.51)
.003 M A M
.075 (1.91) TYP
J-33
.094 ± .003
(2.39 ±0.08) 2x
32 31 30
33
.003 M A M
17
16 15
28 27 26
29
14 13 12
11 10
25
9
24
8
23 22 21 20 19
7
6
5
4
3
18
2
1
.075 (1.91)
.0375 (0.95) TYP
1.615 (41.02)
G
.8075 (20.51)
J-7P7
.094 ± .003
(2.39 ±0.08) 2x
A7
A6
A5
A4
A3
A2
A1
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 7x)
.175 (4.45) 6x
.003 M A M
2.015 (51.18)
K-27P4
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
.0375 (0.95)
TYP
.075 (1.91)
TYP
23 22 21
A4
20
19
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.003 M A M
16 15
17
18
A2
11 10
9
8
7
6
5
4
.003 M A M
14 13
A3
12
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
3
2
A1
1
.075 (1.91) TYP
.1.0075 (25.59)
.5755 (14.62)
.175 (4.45)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-14
Insert
Arr.
Series 79
90°°° PCB
Connectors
790-036P and 790-041P
Right Angle PCB Connectors
Receptacle PCB Hole Patterns
790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.1.0075 (25.59)
K-35P2
.094 ± .003
(2.39 ±0.08) 2x
33 32 31
.003 M A M
.075 (1.91)
TYP
30
29 28 27 26
25
24
23 22 21
20
19
18
A2
A1
.003 M A M
11 10
14 13 12
16 15
17
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
9
8
7
6
5
1
.075 (1.91)
.0375 (0.95)
TYP
.003 M A M
2
3
4
.750 (19.05)
2x
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 43x)
.0375 (0.95) TYP
.075 (1.91) TYP
.220 (5.59)
K-43
.094 ± .003
(2.39 ±0.08) 2x
43
.003 M A M
42
22 21
41 40
20 19
39 38
18 17
37 36
16 15
32
35 34 33
14 13
11 10
12
28
29
31 30
9
8
7
27 26 25 24
6
5
2
3
4
23
1
.075 (1.91)
TYP
.1.0075 (25.59)
2.015 (51.18)
K-9P9
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 9x)
.1.0075 (25.59)
.094 ± .003
(2.39 ±0.08) 2x
A8
A9
.003 M A M
.003 M A M
A7
A5
A6
A4
A3
A1
A2
.175 (4.45)
2.036 (51.71)
.428 (10.87)
L-6P6
.125 ± .003
(3.18 ±0.08) 2x
A6
A5
A3
A4
A2
A1
.003 M A M
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 6x)
.236 (5.99)
5x
.003 M A M
HOLE TO ACCEPT .022 (0.56)
MAX DIA CONTACT 78X
.003 M
.075 TYP.
AM
78 77 76
L-78
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59
58 57 56
39 38 37
55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
19 18 17
16 15 14 13 12 11 10 9
AM
M
7
6
5
4
3
2
1
.075
TYP.
2.036
HOLE TO ACCEPT .022 (0.56)
MAX DIA CONTACT 102X
.003
8
1.018
Ø.125±.003 2X
.003 M
G
.0375 TYP.
.075
A M
.038
102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83
82
M-102
81
80
61
41
20
2X Ø.125±.003
.003
M
A M
60
40
19
79
59
39
78
58
38
18
77
57
37
17
16
76
56
36
15
75
55
35
14
74
54
34
13
73
53
33
12
72
52
32
11
71
51
31
10
70
50
30
9
69
49
29
8
68
48
28
7
67
47
27
6
66
46
26
5
65
45
25
4
64
44
24
3
63
43
23
2
62
42
22
21
1
.075 TYP
1.100
2.200
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-15
www.glenair.com
Series 79
90°°° PCB
Connectors
790-037S
Right Angle PCB Terminated
Panel Mount Plugs, Socket Contacts
How To Order
790-037S Right Angle PCB Panel Mount Plugs
socket contacts with RIGHT ANGLE PCB TERMINATION
Lightweight, rugged right angle headers feature gold-plated PC tail contacts
for thru-hole printed circuit board termination. 790-037S connectors are
designed for rear-panel mounting and are supplied with conductive panel
gaskets. Contacts are permanently installed and are sealed with epoxy.
Shells are aluminum alloy. EMI shroud improves shielding performance.
Threaded board mounting holes and integral standoffs simplify installation.
Available in 29 different contact arrangements, these connectors feature
size #23 signal contacts along with #16 and #12 power contacts for up to 23
amps current rating. Optional EMI spring improves shell-to-shell conductivity
and shielding performance.
How To Order
790-037S
Part Number
790-037S
Rear Panel Mounted
Plug with 90° PC
Tail Contacts for
Termination to
Backplanes or
Flexible Circuits
Sample Part Number
H-5P5
Shell Size Insert
Arrangements
See Table 1
for Available
Insert
Arrangements
M
E
P
B
Shell Finish
EMI Spring
Hardware Option
PC Tail Length
M
Electroless Nickel
general purpose
applications
MT
Nickel-PTFE
E
ZNU
G
tactical applications
(non-reflective black)
Additional shell
finishes are listed on
page C-9.
No Spring
No Hardware
B
.250 inch (6.4 mm.)
EMI
SPRING
G
Guide Pin
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
PC TAIL
LENGTH
P
Female Jackpost
S
Female Guide Socket
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
.125 Inch (3.2 mm.)
N
N
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
Zinc-Nickel with Black
Chromate
a
EMI Spring
Materials and Finishes
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
PCB Tray
EMI Shroud
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, gold plated, with
stainless steel hood
Liquid crystal polymer (LCP)
Thermoplastic
Aluminum alloy
300 series stainless steel
Fluorosilicone, conductive
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-16
Series 79
90° PCB
Connectors
790-037S
Right Angle PCB Terminated
Panel Mount Plugs, Socket Contacts
How To Order
Table I Contact Arrangements
Layout
A-5
Contact
Quantity
#23 #16 #12
5
B-2P2
9
C-13
13
D-15
15
D-3P3
.183 (4.65)
Face View
EMI GASKET
.025 (0.64)
INSULATOR
EMI SPRING
EPOXY
2
B-9
CROSS-SECTIONAL VIEW OF 790-037S
SOCKET CONTACT
EMI SHROUD
TRAY
3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
3
F-15P2
13
2
F-23
23
F-5P5
SHELL
.007
(0.18)
TABLE 2
HARDWARE OPTION
5
G-33
33
H-10P4
6
H-29P7 22
4
7
H-36P2 34
H-54P2 52
2
N
2
H-5P5
5
H-66
66
J-17P4
13
4
J-25P2
23
2
J-33
33
J-7P7
P
No Mating Hardware
Connector is supplied with blind,
tapped holes. Shell sizes H and L
have 6-32 UNC-2B thread, other
sizes are #4-40. Minimum thread
depth is .150" (3.81).
Jackposts
Connector is supplied with
non-removable jackposts.
Shell sizes H and L have #4-40
UNC-2B thread, other sizes
have #2-56 thread.
G
7
K-27P4
23
4
K-35P2
33
2
K-43
43
K-9P9
9
L-6P6
6
L-78
78
M-102
102
G
S
Male Guide Pins
Female Guide Sockets
Connector is supplied with stainless
steel guide pins to mate with code
S guide sockets. Pins are nonremovable.
Connector is supplied with
stainless steel guide sockets to
mate with code G guide pins.
Sockets are non-removable.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-17
www.glenair.com
Series 79
90°°° PCB
Connectors
790-037S
Right Angle PCB Terminated
Panel Mount Plugs, Socket Contacts
Dimensions
790-037S Shell Sizes A-F, J and K Dimensions
BLIND MATE
A MAX
.228 (5.79)
MIN
B BASIC
.233 (5.92)
MAX
C BASIC
.078 (1.98)
MIN
D MAX
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
.500 (12.70)
MAX
2-56 UNC-2B
X .150 (3.81) MIN
2 PLACES
JACKPOST
SHOWN FOR
REFERENCE.
.158 (4.01)
.335 (8.51)
MAX
435 (11.05)
TYP
2-56 UNC-2B
2 PLACES
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.560 (14.22)
MAX
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
C BASIC
E MAX
G
790-037S SHELL SIZES A-F, J AND K
Shell
Size
A
B
C
D
E
F
J
K
A Max.
In.
mm.
B Basic
In . mm.
C Basic
In.
mm.
D Max.
In.
mm.
E Max.
In.
mm.
1.211
30.76
.925
23.50
.565
14.35
.335
8.51
.805
20.45
1.361
1.511
1.611
1.761
1.911
2.261
2.661
34.57
38.38
40.92
44.73
48.54
57.43
67.59
1.075
1.225
1.325
1.475
1.625
1.975
2.375
27.31
31.12
33.66
37.47
41.28
50.17
60.33
.715
.865
.965
1.115
1.265
1.615
2.015
18.16
21.97
24.51
28.32
32.13
41.02
51.18
.485
.635
.735
.885
1.035
1.380
1.783
12.32
16.13
18.67
22.48
26.29
35.05
45.29
.955
1.105
1.205
1.355
1.505
1.855
2.255
24.26
28.07
30.61
34.42
38.23
47.12
57.28
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-18
Series 79
90° PCB
Connectors
790-037S
Right Angle PCB Terminated
Panel Mount Plugs, Socket Contacts
Dimensions
790-037S Shell Size G Dimensions
#2-56 FLAT HEAD SCREW
1.855 (47.12) MAX
1.575 (40.01) BASIC
.228 (5.79)
MIN
1.215 (30.86) BASIC
.320 (8.13)
MAX
1.010 (25.65) MAX
.078 (1.98)
MIN
.620 (15.75)
MAX
2-56 UNC-2B
X .150 (3.81) MIN
2 PLACES
JACKPOST SHOWN
FOR REFERENCE.
.158 (4.01)
.355 (9.02)
MAX
.510 (12.95)
TYP
2-56 UNC-2B
2 PLACES
.018/.022
(0.46/0.56)
.630 (16.00)
MAX
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
BLIND MATE
1.215 (30.86) BASIC
1.450 (36.83)
MAX
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-19
www.glenair.com
G
Series 79
90°°° PCB
Connectors
790-037S
Right Angle PCB Terminated
Panel Mount Plugs, Socket Contacts
Dimensions
790-037S Shell Sizes H and L Dimensions
#2-56 FLAT
HEAD SCREW
#2-56
FLATHEAD
SCREW
790-037S SHELL SIZES H AND L
FF MAX
MAX
BASIC
GG BASIC
BASIC
HH BASIC
JJ
Shell
Size
H
L
.349
(8.86)
.349 (8.86)
MAX
MAX
F Max.
In.
mm.
G Basic
In . mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
2.175 55.25
2.411 61.24
.288
(6.05)
.288 (6.05)
MIN
MIN
.088
.088 (2.24)
(2.24)
PC TAIL LENGTH
±.020
PC TAIL(0.51)
LENGTH
± .020 (0.51)
CODE
A: .125 (3.18)
CODE A: .125 (3.18)
CODE
.250
(6.35)
CODE B:B:
.250
(6.35)
.620
(15.75)
.620 (15.75)
MAX
MAX
.320 (8.13)
(8.13)
.320
MAX
MAX
.158
.158(4.01)
(4.01)
.300(7.62)
(7.62)
.300
MAX
MAX
4-40
UNC-2B
4-40
UNC-2B
2 PLACES
2 PLACES
JACKPOST
JACKPOST SHOWN
SHOWN
FOR
FOR
REFERENCE
REFERENCE.
4-40
UNC-2B
X .150
4-40 UNC-2B
X .150
(3.81)(3.81)
MIN MIN.
PLACES
22PLACES
CONTACT
CONTACT TAILTAIL
DIA DIA.
#23 CONTACT
.018/.022
(0.46/0.56)
#23
CONTACT
.018/.022
(0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
#16
CONTACT
.060/.064
(1.52/1.63)
#12 CONTACT
.096/.092
(2.44/2.34)
#12 CONTACT .096/,092 (2.44/2.34)
.5075 (12.98)
(12.89)
.5075
.700(17.78)
(17.78)
.700
TYP
TYP
MAX
MAX
BLIND MATE
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
BASIC
HH BASIC
KK MAX
MAX
790-037S Shell Size M Dimensions
2X #2-56
FLAT FLATHEAD SCREW
2X
#2-56
HEAD SCREW
3.085(78.36)
(78.36) MAX MAX
3.085
2.770(70.36)
70.36) BASICBASIC
2.770
2.200 (55.88)
(55.88) BASICBASIC
2.200
1.675 (42.65)
MAX. MAX
1.675
(42.65)
G
.158
(4.01)
.158 (4.01)
.350 (8.89)
MAX
.5825
.5825
(14.80)
(14.80)
BASIC
BASIC
2X 6-32
UNC-2B
2X
6-32
UNC-2B
X .150 (3.81) MIN
X .150 (3.81) MIN
.680
.407(10.34)
(10.34)
(17.27) .407
MAX.
MAX
MAX
.680
(17.27)
MAX
JACKPOST SHOWN FOR
REFERENCE
JACKPOST
SHOWN
SEE TABLE I (DWG. SHEET
#1)
FOR REFERENCE
.250
(6.35)
MIN
PC TAIL LENGTH
±.020 (0.51)
.078 PC TAIL LENGTH
CODE
A: .125 (3.18)
±.020
.078
(1.98)
CODE A: .125 (3.18)
(1.98)
CODE B: .250
CODE
B:(6.35)
.250 (6.35)
.018/.022 (0.46/0.56)
.018/.022
(0.46/0.56)
.350
(8.89)
MAX
BLIND MATE
.775
.775
(19.69)
MAX
(19.69)
MAX
SHELL SIZE M
+/- .050 (1.27) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
2X 6-32
UNC-2B
2X
4-40
UNC 2B
2.200(55.88)
(55.88) BASICBASIC
2.200
2.575 (65.41)
(65.41) MAX MAX
2.575
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-20
Series 79
90°°° PCB
Connectors
790-042S
Right Angle PCB Terminated
Free-Standing Plugs, Socket Contacts
How To Order
790-042S Right Angle PCB Free-Standing Plugs
socket contacts with PCB TERMINATION
Free-standing rugged right angle headers feature gold-plated PC tail contacts
for thru-hole printed circuit board termination. Not for panel mounting. Contacts
are permanently installed and are sealed with epoxy. Shells are aluminum alloy.
EMI shroud improves shielding performance. Threaded board mounting holes
and integral standoffs simplify installation. Available in 29 different contact
arrangements, these connectors feature size #23 signal contacts along with
#16 and #12 power contacts for up to 23 amps current rating. Optional EMI
spring improves shell-to-shell conductivity and shielding performance. Mates
with 790-024p cable receptacles.
How To Order
790-042S
L-6P6
Part Number
Shell Size Insert
Arrangements
790-042S
Right Angle Plug with
90° PC Tail Contacts
for Termination to
Backplanes or Flexible
Circuits
See Table 1
for Available
Insert
Arrangements
Sample Part Number
M
E
P
A
Shell Finish
EMI Spring
Hardware
Option
PC Tail Length
M
Electroless Nickel
general purpose
applications
E
a
EMI Spring
.125 Inch (3.2 mm.)
N
No Spring
MT
EMI
SPRING
Nickel-PTFE
N
No Hardware
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
Additional shell
finishes are listed on
page C-9.
Note:
EMI Spring
is not
compatible
with chromate
finishes
including
cadmium and
zinc-nickel
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
B
.250 inch (6.4 mm.)
PC TAIL
LENGTH
P
Female Jackpost
G
Materials and Finishes
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
PCB Tray
EMI Shroud
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, gold plated
Liquid crystal polymer (LCP)
Thermoplastic
Aluminum alloy
300 series stainless steel
Fluorosilicone, conductive
Epoxy
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-21
www.glenair.com
Series 79
90° PCB
Connectors
790-042S
Right Angle PCB Terminated
Free-Standing Plugs, Socket Contacts
How To Order
Table I Contact Arrangements
Layout
A-5
Contact
Quantity
#23 #16 #12
5
CROSS-SECTIONAL VIEW OF 790-042S
INSULATOR
Face View
EMI SPRING
EPOXY
SOCKET CONTACT
EMI SHROUD
2
B-2P2
B-9
9
C-13
13
D-15
15
TRAY
SHELL
3
D-3P3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
TABLE 2 HARDWARE OPTION
3
F-15P2 13 2
F-23
23
5
F-5P5
G-33
33
H-10P4
6
4
H-29P7 22 7
H-36P2 34
2
H-54P2 52 2
P
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and
L have #4-40 UNC thread, other sizes have
#2-56 thread.
5
H-5P5
H-66
N
No Mating Hardware
66
J-17P4 13 4
J-25P2 23 2
G
J-33
33
7
J-7P7
K-27P4 23 4
K-35P2 33 2
K-43
43
9
K-9P9
6
L-6P6
L-78
78
M-102
102
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-22
Series 79
90° PCB
Connectors
790-042S
Right Angle PCB Terminated
Free-Standing Plugs, Socket Contacts
Dimensions
790-042S Shell Sizes A-F, J and K Dimensions
.228 (5.79)
MIN
A MAX
B BASIC
.167 (4.95)
.233 (5.92)
MAX
C MAX
.078 (1.98)
MIN
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.430
.500 (10.92)
(12.70)
MAX
MAX
JACKPOST, #2-56
CONTACT TAIL DIA
#23 CONTACT .018/.022 (0.46/0.56)
#16 CONTACT .060/.064 (1.52/1.63)
.183 ± .003
(4.65 ± 0.08)
790-042S SHELL SIZES A-F, J AND K
Shell
Size
A
B
C
D
E
F
J
K
.540 (13.72)
MAX
.410 (10.41)
B BASIC
D MAX
A Max.
In.
mm.
.805
.955
1.105
1.205
1.355
20.45
24.26
28.07
30.61
34.42
1.505 38.23
1.855 47.12
2.255 57.28
B Basic
In.
mm.
.565
.715
.865
.965
1.115
14.35
18.16
21.97
24.51
28.32
1.265 32.13
1.615 41.02
2.015 51.18
C Max.
In.
mm.
.335
.485
.635
.735
.885
8.51
12.32
16.13
18.67
22.48
1.035 26.29
1.380 35.05
1.783 45.29
790-042S Shell Size G Dimensions
.228 (5.79)
MIN
1.455 (36.96) MAX
.209 (5.31)
BASICBASIC
1.215 B
(30.86)
1.010 (25.65) MAX
.320 (8.13)
MAX
.078 (1.98)
MIN
.530 (13.46)
MAX
G
JACKPOST, #2-56
.018/.022
(0.46/0.56)
.183 ± .003
(4.65 ± 0.08)
PC TAIL LENGTH
± .020 (0.51)
CODE A: .125 (3.18)
CODE B: .250 (6.35)
.615 (15.62)
MAX
.485 (12.62)
1.215 (30.86) BASIC
1.455 (36.96)
MAX
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-23
www.glenair.com
Series 79
90° PCB
Connectors
790-042S
Right Angle PCB Terminated
Free-Standing Plugs, Socket Contacts
Dimensions
790-042S Shell Sizes H and L Dimensions
#2-56 FLAT
HEAD
SCREW
#2-56
FLAT
HEAD
SCREW
A
MAX.
A MAX
B BASIC
B
BASIC
C
C
.222
(5.64)
.222 (5.64)
.349
(8.86)
.349 (8.86)
MAX.
MAX
.288
(6.05)
.088
.288 (6.05)
MIN.
MIN
.088
(2.24)
(2.24)
PC
TAIL
LENGTH
PC TAIL
LENGTH
± .020 (0.51)
±.020
(0.51)
CODE A: .125 (3.18)
CODE
.125
(3.18)
CODE B:A:
.250
(6.35)
CODE B: .250 (6.35)
CONTACT TAIL DIA.
CONTACT TAIL DIA
#23
CONTACT
.018/.022
(0.46/0.56)
#23 CONTACT
.018/.022
(0.46/0.56)
#16 CONTACT
.060/.064
(1.52/1.63)
#16
CONTACT
.060/.064
(1.52/1.63)
#12 CONTACT .096/.092 (2.44/2.34)
#12
CONTACT .096/.092 (2.44/2.34)
.550 (13.97)
.550
(13.97)
MAX
MAX.
JACKPOST, #4-40
JACKPOST,
#4-40
.183
.183±.003
± .003
(4.65
± 0.08)
(4.65
± 0.08.)
.491
.491
(12.47)
(12.47)
4-40
UNC-2B X
X
4-40
UNC-2B
.150 (3.81) MIN 2
.150
(3.81) PLCS
MIN.
2 PLCS
.700
(17.78)
.700 (17.78)
MAX
MAX.
790-042S SHELL SIZES H AND L
Shell
Size
H
L
B
BASIC
B BASIC
A
MAX.
A MAX
A Max.
In.
mm.
B Basic
In.
mm.
C Max.
In.
mm.
2.185 55.50
2.430 61.72
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
790-042S Shell Size M Dimensions
2X
FLAT FLAT
2X#2-56
#2-56
HEAD SCREW
HEAD SCREW
2.575 (65.41)
BASICBASIC
2.575
(65.41)
2.200 (55.88)
BASICBASIC
2.200
(55.88)
1.675 (42.65)
MAX. MAX.
1.675
(42.65)
G
.158 (4.01)
.158
(4.01)
.350
.635
.407(10.34)
(10.34)
.407
(16.13)
(16.13)
MAX.
MAX.
.350.350
(8.89) MAX.
(8.89)
MAX.
MAX.
MAX
.566.566(14.38)
(14.38)
BASIC
BASIC
.765
.765
(19.43)
(19.43)
MAX
MAX.
2X
6-32 UNC-2B
2X 6-32 UNC-2B
X .150
(3.81)
MIN MIN.
X
.150
(3.81)
JACKPOST SHOWN
FOR REFERENCE
JACKPOST
SHOWN
FOR
SEE TABLE I (DWG. SHEET #1)
REFERENCE
.250
.250)
(6.35)
(6.35)
MIN.
MIN
.078
.078
(1.98)
(1.98)
PC TAIL LENGTH
±.020 (0.51)
(3.18)
(6.35)
PC TAIL LENGTH
±.020
CODE A: .125
CODE A: .125 (3.18)
CODE
B:(6.35)
.250
CODE
B: .250
.018/.022 (0.46/0.56)
.018/.022
(0.46/0.56)
2X
UNC-2B
2X4-40
4-40
UNC-2B
2.200 (55.88)
BASICBASIC
2.200
(55.88)
2.575 (65.41)
MAX MAX.
2.575
(65.41)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-24
Series 79
90° PCB
Connectors
790-037S and 790-042S
Right Angle PCB Connectors
Plug PCB Hole Patterns
790-037S and 790-042S Plug Hole Patterns
This section contains printed circuit
board footprints for right angle Series
79 plugs. The contact identification
numbers are shown for the connector
mounting side of the PC board.
Contact tails are gold over nickel
plated.
Insert
Arr.
Contact
Size
CONNECTOR ORIENTATION
#23
#16
#12
.018-.022
.060-.064
.092-.096
0.46-0.56
1.52-1.63
2.34-2.44
790-037S AND 790-042S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
.565 (14.35)
.2825
(7.18)
A-5
PC Tail Diameter
Ø Diameter
In.
mm.
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.003 M A M
4
.003 M A M
5
2
1
3
.075 (1.91)
TYP
.0375 (0.95)
TYP
.715 (18.16)
.270 (6.86)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.003 M A M
B-2P2
.094 ± .003
(2.39 ±0.08) 2x
A1
A2
.003 M A M
.175 (4.45)
.715 (18.16)
.3575 (9.08)
B-9
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
6
.003 M A M
1
7
8
3
2
9
G
5
4
.075 (1.91)
TYP
.0375 (0.95)
TYP
.865 (21.97)
.4325 (10.99)
C-13
9
8
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
1
2
10
3
11
4
.075 (1.91)
TYP
12
5
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.003 M A M
13
6
.0375 (0.95)
TYP
7
.075 (1.91)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-25
www.glenair.com
Series 79
90° PCB
Connectors
790-037S and 790-042S
Right Angle PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-037S AND 790-042S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
.965 (24.51)
.4825 (12.26)
D-15
.094 ± .003
(2.39 ±0.08) 2x
10
9
.003 M A M
3
2
1
.075 (1.91)
TYP
13 14
12
11
4
5
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 15x)
.003 M A M
15
7
6
8
.075 (1.91)
TYP
.0375 (0.95)
TYP
.965 (24.51)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
.4825 (12.26)
.175 (4.45)
2x
D-3P3
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
A2
A1
.003 M A M
A3
.965 (24.51)
.205 (5.21)
2X
.4825 (12.26)
.094 ± .003
(2.39 ±0.08) 2x
D-7P2
.075 (1.91)
TYP
A2
2
1
3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
.0375 (0.95)
TYP
.003 M A M
G
.094 ± .003
(2.39 ±0.08) 2x
.075 (1.91)
TYP
.075 (1.91)
TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 9x)
1.115 (28.32)
.5575 (14.16)
E-11P2
.003 M A M
5
4
A1
.003 M A M
T
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 5x)
.003 M A M
5
7
6
8
9
A2
A1
.003 M A M
1
2
3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2X)
4
.0375 (0.95) TYP
.075 (1.91)
TYP
.2795 (7.10) 2X
.003 M A M
1.115 (28.32)
.5575 (14.16)
E-19
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
11 12
1
2
13 14
3
4
15 16
5
6
.075 (1.91)
TYP
.0375 (0.95)
TYP
8
.003 M A M
19
17 18
7
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 19x)
9
10
.075 (1.91)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-26
Series 79
90° PCB
Connectors
790-037S and 790-042S
Right Angle PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-037S AND 790-042S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 3x)
1.115 (28.32)
.5575 (14.16)
E-7P3
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 4x)
.175 (4.45)
2x
.094 ± .003
(2.39 ±0.08) 2x
4
3
A2
A1
.003 M A M
A3
1
2
.2975 (7.56)
2x
.0375 (0.95)
2x
.075 (1.91)
TYP
1.265 (32.13)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.6325 (16.07)
F-15P2
.094 ± .003
(2.39 ±0.08) 2x
7
.075 (1.91)
TYP
8
10
9
.003 M A M
13
11 12
A1
A2
.003 M A M
1
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
2
3
4
6
5
.075 (1.91)
TYP
.0375 (0.95)
TYP
.352 (8.94)
2X
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
1.265 (32.13)
.6325 (16.07)
F-23
1
2
.003 M A M
15 16
13 14
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
.003 M A M
3
4
19
17 18
5
6
.075 (1.91)
TYP
7
20
8
21 22 23
10 11 12
9
.075 (1.91)
TYP
.0375 (0.95)
TYP
1.265 (32.13)
.6325 (16.07)
F-5P5
.094 ± .003
(2.39 ±0.08) 2x
A1
A4
A3
A2
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
G
.175 (4.45)
4x
.003 M A M
1.215 (30.86)
.6075 (15.43)
24 25
G-33
A5
.003 M A M
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
.075 (1.91) TYP
26 27
28 29
13
14
15 16
17 18
19
1
2
3
5
7
4
6
30
31
20
8
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
32 33
.003 M A M
21 22 23
9
10 11
12
.0375 (0.95)
TYP
.075 (1.91)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-27
www.glenair.com
Series 79
90° PCB
Connectors
790-037S and 790-042S
Right Angle PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-037S AND 790-042S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
1.800 (45.72)
.900 (22.86)
H-10P4
.0375 (0.95)
TYP
.125 ± .003
(3.18 ±0.08) 2x
6
4
A1
.003 M A M
5
A2
A4
A3
3
.003 M A M
.075 (1.91)
TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 6x)
2
1
.075 (1.91)
TYP
.472 (11.99)
.236 (5.99)
TYP
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 4x)
.003 M A M
TYP
1.800 (45.72)
.290 (7.37)
H-29P7
.6125
.900 (22.86)
TYP .175 (4.45)
A1
.125 ± .003
(3.18 ±0.08) 2x
4
1
.003 M A M
3
2
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 7x)
A2
7
5
6
A5
A4
A3
10
8
9
13
11
14
12
A7
A6
15
16
19
17 18
20
.075 (1.91) TYP
22
21
(HOLE TO ACCEPT
.022 (0.56) MAX
DIA CONTACT 22x)
.003 M A M
.175 (4.45)
TYP
.050 (1.27) TYP
.075 (1.91) TYP
.003 M A M
.100 (2.54) TYP
1.800 (45.72)
.900 (22.86)
26 27
H-36P2
.125 ± .003
(3.18 ±0.08) 2x
20
32 33
13 14
3
2
1
31
21 22 23
10 11 12
9
.003 M A M
30
28 29
19
18
A1
.1725 (4.38)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 34x)
.075 (1.91)
TYP
4
5
.075 (1.91) TYP
.003 M A M
34
24 25
15 16
7
6
.0375 (0.95)
A2
17
8
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 2x)
.472 (11.99)
.003 M A M
.944 (23.98)
1.800 (45.72)
.580 (14.73)
.900 (22.86)
40 41
G
.125 ± .003
(3.18 ±0.08) 2x
H-54P2
42 43
28 29
A1
15 16
.003 M A M
1
2
30
4
45
46 47
48
34
35 36
32 33
31
21
19 20
18
17
3
44
5
6
7
22
8
23
9
49
50 51
37
24
38
25
10 11 12
.075 (1.91) TYP
52
39
26
27
A2
13 14
.0375 (0.95) TYP
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 52x)
.075 (1.91) TYP
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
.003 M A M
1.160 (29.46
1.800 (45.72)
.900 (22.86)
H-5P5
.125 ± .003
(3.18 ±0.08) 2x
A1
A2
A3
A4
A5
.003 M A M
.236 (5.99)
4x
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 5x)
.003 M A M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-28
Series 79
90° PCB
Connectors
790-037S and 790-042S
Right Angle PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-037S AND 790-042S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
1.800 (45.72)
.900 (22.86)
.075 (1.91) TYP
50 51
H-66
.125 ± .003
(3.18 ±0.08) 2x
52 53
34 35
.003 M A M
20
3
2
1
36 37
19
17 18
54 55
56
38 39
57
40
21 22 23
4
5
41
59 60
42
8
61
43 44
26 27
24 25
7
6
58
45
.0375 (0.95)
TYP
64 65 66
46 47
28 29
10 11
9
62 63
12
30
48 49
31
13 14
32 33
15 16
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 66x)
.075 (1.91) TYP
.003 M A M
1.615 (41.02)
J-17P4
.075 (1.91)
TYP
.094 ± .003
(2.39 ±0.08) 2x
8
A1
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 13x)
.3725 (9.46)
.8075 (20.51)
.003 M A M
13
10 11 12
9
A4
A3
A2
.003 M A M
1
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
3
2
4
5
7
6
.0375 (0.95)
TYP
.075 (1.91)
TYP
.175 (4.45)
TYP
.003 M A M
1.615 (41.02)
.5475 (13.91)
.8075 (20.51)
.075 (1.91) TYP
J-25P2
.094 ± .003
(2.39 ±0.08) 2x
15 16
13 14
19
17 18
20
21 22 23
A1
A2
.003 M A M
3
2
1
4
5 6
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
8
7
9
10 11 12
.075 (1.91)
TYP
.0375 (0.95) TYP
.003 M A M
.003 M A M
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
1.615 (41.02)
.8075 (20.51)
.003 M A M
.075 (1.91) TYP
J-33
.094 ± .003
(2.39 ±0.08) 2x
1
21 22 23
19 20
18
.003 M A M
2
3
6
5
4
24
7
25
26 27 28
9
8
10
11
29
30 31 32
12 13
14
33
15 16
17
.075 (1.91)
.0375 (0.95) TYP
1.615 (41.02)
G
.8075 (20.51)
.094 ± .003
(2.39 ±0.08) 2x
J-7P7
A1
A2
A3
A4
A5
A6
A7
.003 M A M
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 7x)
.175 (4.45) 6x
.003 M A M
2.015 (51.18)
K-27P4
.094 ± .003
(2.39 ±0.08) 2x
.003 M A M
13 14
A1
.0375 (0.95)
TYP
.075 (1.91)
TYP
15 16
17
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 23x)
.003 M A M
18
19
20
A3
2
3
4
5
6
7
8
.003 M A M
21 22 23
A2
1
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 4x)
9
10 11
A4
12
.075 (1.91) TYP
.1.0075 (25.59)
.5755 (14.62)
.175 (4.45)
TYP
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
G-29
www.glenair.com
Series 79
90°°° PCB
Connectors
790-037S and 790-042S
Right Angle PCB Connectors
Plug PCB Hole Patterns
Insert
Arr.
790-037S AND 790-042S PRINTED CIRCUIT BOARD PATTERNS
Component Mounting Side of PCB
Mating Face of Connector is Toward Top of Page
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 33x)
.1.0075 (25.59)
K-35P2
.094 ± .003
(2.39 ±0.08) 2x
18
19
.003 M A M
.075 (1.91)
TYP
20
21 22 23
24
25
26 27 28 29
30
31 32 33
A2
A1
.003 M A M
2
1
3
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 2x)
6
5
4
7
8
10 11
9
12 13 14
17
.075 (1.91)
.0375 (0.95)
TYP
.003 M A M
15 16
.750 (19.05)
2x
2.015 (51.18)
(HOLE TO ACCEPT
.022 (0.56) MAX DIA
CONTACT 43x)
.0375 (0.95) TYP
.075 (1.91) TYP
.220 (5.59)
K-43
.094 ± .003
(2.39 ±0.08) 2x
24 25
23
.003 M A M
1
2
3
27 28
26
5
4
29
6
7
30
9
8
32 33
31
10
34 35 36
37 38 39
13 14 15 16
11 12
42
40 41
17 18
19
20
43
21
22
.075 (1.91)
TYP
.1.0075 (25.59)
2.015 (51.18)
(HOLE TO ACCEPT
.064 (1.63) MAX DIA
CONTACT 9x)
.1.0075 (25.59)
K-9P9
.094 ± .003
(2.39 ±0.08) 2x
A1
.003 M A M
.003 M A M
A3
A2
A5
A4
A8
A7
A6
A9
.175 (4.45)
2.036 (51.71)
.428 (10.87)
.125 ± .003
(3.18 ±0.08) 2x
L-6P6
A2
A1
A3
A4
A6
A5
.003 M A M
(HOLE TO ACCEPT
.096 (2.44) MAX DIA
CONTACT 6x)
.236 (5.99)
5x
.003 M A M
HOLE TO ACCEPT .022 (0.56)
MAX DIA CONTACT 78X
G
.003 M
.075 TYP.
AM
.0375 TYP.
78 77 76
L-78
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59
58 57 56
39 38 37
55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
19 18 17
AM
M
7
6
5
4
3
2
1
.075
TYP.
2.036
HOLE TO ACCEPT .022 (0.56)
MAX DIA CONTACT 102X
.003
8
1.018
Ø.125±.003 2X
.003 M
16 15 14 13 12 11 10 9
.075
A M
.038
102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83
82
M-102
81
61
41
20
2X Ø.125±.003
.003
M
A M
80
79
60
40
59
39
19
78
77
58
38
18
57
37
17
16
76
56
36
15
75
55
35
14
74
54
34
13
73
53
33
12
72
52
32
71
51
31
11
10
70
50
30
9
69
49
29
8
68
48
28
7
67
47
27
6
66
46
26
5
65
45
25
4
64
44
24
3
63
43
23
2
62
42
22
21
1
.075 TYP
1.100
2.200
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
G-30
Series 79
Accessories
799-015
Low Profile EMI Backshell
for 790-024 and 790-025 Cable Connectors
How To Order
799-015 Low Profile EMI Backshell
FOR 790-024 AND 790-025 CABLE CONNECTORS
Attach cable braid to connector with 799-015 adapters. These adapters fit securely into
a groove on 790-024 and 790-025 cable connectors. Terminate shields with BAND-IT®
stainless steel straps. Elliptical cable entry provides room for large wire bundles.
Machined T6061 aluminum adapters consist of two interlocking housings, two
fillister head screws and two lockwashers. These lightweight, space-saving adapters
are compatible with captive screws on connector flange. This adapter is non
environmental. Fill with potting compound to prevent water intrusion.
How To Order
799-015T
M
B
Part Number
Shell Finish
02
N
02
Shell
Size
Cable Entry
Size
Band Option
Optional Height Code*
M
A
D
general purpose
applications
B
Electroless Nickel
MT
799-015T
Top Entry
799-015S
Side Entry
Sample Part Number
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and
durability
(non-reflective grey)
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective
black)
Additional shell
finishes are listed
on page C-9.
C
D
E
F
G
H
J
K
L
N
No Band Supplied
Cable
Entry
Code
01
02
03
04
05
06
07
08
09
10
11
12
D
B
E
M
D
In.
mm.
Shell
Size
.140
.290
.440
.540
.690
.810
1.000
1.190
1.305
1.420
1.600
3.56
7.37
11.18
13.72
17.53
20.57
25.40
30.23
33.15
36.07
40.64
A-M
B-M
C-M
D-M
E-M
F-M
H-M
H-M
K-M
K-M
K
1.500
38.10 K and M
BAND-IT™ MicroBand Included. .125
(3.18) Wide.
M
Height
Code
01
02
03
04
05
06
07
08
09
10
Omit
E
In.
.810
.940
1.060
1.190
1.310
1.440
1.560
1.690
1.810
1.940
.690
mm.
20.6
23.9
26.9
30.2
33.3
36.6
39.6
42.9
46.0
49.3
17.5
* For Top Entry Style T,
shortest height code of E
= .69" is limited to shell &
entry size combinations A01,
B02, C03, D04, E05, F06,
G06, H08, J08, K11, L10 &
M12 to ensure adequate wire
clearance. Contact factory for
other combinations. For Side
Entry Style S, shortest height
code E is acceptable for all
shell & entry size combinations
except consideration for
12AWG wire bend radius.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
H-1
www.glenair.com
H
Series 79
Accessories
799-015
Low Profile EMI Backshell
for 790-024 and 790-025 Cable Connectors
How To Order
799-015 Low Profile EMI Backshell
STYLE S - SIDE ENTRY
STYLE T - TOP ENTRY
C
C
D
A
B
A
.320 (8.13)
D
.320 (8.13)
B
E
E
CONNECTOR SHOWN FOR
REFERENCE - NOT SUPPLIED
799-015 DIMENSIONS
H
Shell
Size
A
B
C
D
E
F
G
H
J
K
L
M
A Max.
In.
mm.
B
In .
ENTRY SIZE
mm.
C Max.
In.
mm.
Available
Entries
.385
9.78
.270
6.86
.485 12.32
01
.385
.385
9.78
9.78
.270
.270
6.86
6.86
.635 16.13
.785 19.94
01 thru 02
01 thru 03
.385
.385
9.78
9.78
.270
.270
6.86
6.86
.885 22.48
1.035 26.29
01 thru 04
01 thru 05
.385
9.78
.465 11.81
.495 12.57
.270
.350
.380
6.86
8.89
9.65
1.185 30.10
1.145 29.08
1.525 38.74
01 thru 06
01 thru 06
01 thru 08
.385
.385
9.78
9.78
.270
.270
6.86
6.86
1.545 39.24
1.945 49.40
01 thru 08
01 thru 11
.495 12.57
.555
.380
.440
9.65
1.765 44.83 01 thru 10
1.830
01 thru 10, 12
Component
Entry
Size
01
02
03
04
05
06
07
08
09
10
11
12
D
Available
Sizes
In.
mm.
.140
.290
3.56
7.37
A Thru L
B thru L
.440
.540
.690
11.18
13.72
17.53
C thru L
D thru L
E thru L
.810
1.000
20.57
25.40
F, H, J, K, L
H thru L
1.190
1.305
1.420
30.23
33.15
36.07
H Thru L
K, L
K, L
1.600
1.500
40.64
38.10
K
K and M
Material
HEIGHT CODE
E
CODE
01
02
03
04
05
06
07
08
09
10
11
12
In.
mm.
.810
.940
20.6
23.9
1.060
1.190
1.310
26.9
30.2
33.3
1.440
1.560
36.6
39.6
1.690
1.810
1.940
42.9
46.0
49.3
1.600
1.500
40.6
38.1
Finish
Backshell
Aluminum Alloy
See table below
Hardware
Stainless Steel
Passivated
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
H-2
Series 79
Accessories
799-011
Standard EMI Backshell
for 790-024 and 790-025 Cable Connectors
How To Order
799-011 Standard EMI Backshell
FOR 790-0
790-024P AND 790-025S CABLE CONNECTORS
Terminate shield braid and strain relieve wire bundles with standard EMI
backshells. These backshells fit 790-024P and 790-025S cable connectors.
These one-piece backshells attach to connector with stainless steel clips.
Terminate shields with BAND-IT™ stainless steel straps. Elliptical cable entry
provides room for large wire bundles. These machined T6061 aluminum
backshells are supplied with two clips and mating hardware.
How To Order
Sample Part Number
799-011T
M
C
03
B
N
T
06
Part
Number
Shell Finish
Shell
Size
Cable Entry
Size
Mating
Hardware
Band
Option
Qwik-Ty
Option
Height Code
M
A
E
N
N
Top Entry
Electroless
Nickel
general purpose
applications
799-011T
Top Entry
MT
Nickel-PTFE
1000 Hour
Grey™
maximum
corrosion
protection and
durability
(non-reflective
grey)
799-011S
Side Entry
B
B
ZNU
Zinc-Nickel with
Black Chromate
tactical
applications (nonreflective black)
C
D
E
F
G
H
J
K
L
Cable
Entry
E
Code (In.)
01
02
03
04
05
06
07
08
09
10
11
12
Fillister Head
Jackscrews
Shell
Size
.300
.450
.600
.700
.850
A-M
B-M
C-M
D-M
E-M
.965
1.155
1.345
1.460
F-M
H-M
H-M
K-M
1.580
1.760
1.645
K-M
K
M
No Band
Supplied
M
H
E
BAND-IT™
Standard
Band
Included.
.250 (6.35)
Wide.
Extended
Slotted Head
Jackscrew
B
M
Additional shell
finishes are
listed on page
C-9.
HEIGHT
T
BAND-IT™
Micro-Band
Included. .125
(3.18) Wide.
Hex Socket
Head
Jackscrews
No Qwik-Ty
Qwik-Ty
Option
Included
Qwik-Ty
Height Length
Code
(In.)
06
07
08
09
10
.750
.875
1.000
1.125
1.250
Side Entry
HEIGHT
Height Length
Code
(In.)
F
Female
Jackpost
08
09
10
1.000
1.125
1.250
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
H-3
www.glenair.com
H
Series 79
Accessories
799-011
Standard EMI Backshell
for 790-024 and 790-025 Cable Connectors
How To Order
799-011 Standard EMI Backshell
STYLE T - TOP ENTRY
STYLE S - SIDE ENTRY
C
C
B
B D
.42 (10.7)
E
.40 (10.7)
EXTENDED
JACKSCREW
CODE E
QWIK-TY
(OPTIONAL)
E
.42 (10.7)
D
HEIGHT
HEIGHT
2-56 (SIZES A-G, J & K)
4-40 (SIZES H & L)
Component
Backshell
Hardware
SOCKET HEAD
CODE H
FILLISTER HEAD
CODE B
A MAX
Material
Aluminum Alloy
Stainless Steel
A MAX
Finish
See table below
Passivated
FEMALE JACKPOST
CODE F
799-011 DIMENSIONS
H
Shell
Size
A
B
C
D
E
F
G
H
J
K
L
M
A Max.
In.
mm.
B Max.
In . mm.
ENTRY SIZE
C
In.
D
mm.
In.
mm.
Available
Entries
.935 23.75
1.085 27.56
.450
.450
11.43
11.43
.565 14.35
.715 18.16
.300
.300
7.62
7.62
01
01 thru 02
1.235 31.37
1.335 33.91
.450
.450
11.43
11.43
.865 21.97
.965 24.51
.300
.300
7.62
7.62
01 thru 03
01 thru 04
1.485
1.635
1.585
2.320
1.990
37.72
41.53
40.26
58.93
50.55
.450 11.43
.450 11.43
.533 13.54
.560 14.22
.450 11.43
1.115
1.265
1.215
1.800
1.615
.300
7.62
.300
7.62
.383
9.73
.410 10.41
.300
7.62
01 thru 05
01 thru 06
01 thru 06
01 thru 08
01 thru 08
2.385 60.58
2.556 64.92
2.720 69.01
.450 11.43
.560 14.22
.620 15.75
2.015 51.18
2.036 51.71
2.200 55.88
28.32
32.13
30.86
45.72
41.02
.300
7.62 01 thru 11
.410 10.41 01 thru 10
.470 11.94 01 thru 10; 12
Code
01
02
03
04
05
06
07
08
09
10
11
12
E
In.
mm.
.300 7.62
.450 11.43
.600 15.24
.700 17.78
.850 21.59
.965 24.51
1.155 29.34
1.345 34.16
1.460 37.08
1.581 40.16
1.760 44.70
1.645 41.78
Available
Sizes
A thru L
B thru L
C thru L
D thru L
E thru L
F thru L
H thru L
H thru L
K, L
K, L
K
M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
H-4
Series 79
Accessories
799-016
EMI Backshell for Panel Mount Connectors
How To Order
799-016 EMI Backshell
FOR PANEL MOUNT CONNECTORS
Attach shield braid to panel-mounted connectors with 799-016 EMI
adapters. These one-piece backshells attach to connector with stainless
steel screws. These adapters feature an interlocking tongue that fits inside
the connector for improved EMI shielding. Terminate shields with BANDIT™ stainless steel straps. Elliptical cable entry provides room for large
wire bundles. These machined T6061 aluminum backshells are supplied
with two mounting screws. These adapters fit 790-026 receptacles and
790-027 plugs.
How To Order
Sample Part Number
799-016T
M
F
04
N
09
Part Number
Shell Finish
Shell
Size
Cable Entry
Size
Band Option
Height Code
M
A
E
Electroless
Nickel
B
general purpose
applications
C
M
MT
D
799-016T
Top Entry
799-016S
Side Entry
799-016E
N
No Band
Supplied
Nickel-PTFE
1000 Hour Grey™
maximum
corrosion
protection and
durability
(non-reflective
grey)
E
F
G
H
ZNU
Zinc-Nickel with
Black Chromate
J
tactical
applications (nonreflective black)
K
Additional shell
finishes are listed
on page C-9.
L
Cable
Entry
E
Code (In.)
01
02
03
04
05
06
07
08
09
10
11
12
.255
Shell
Size
BAND-IT™
Micro-Band
Included. .125
(3.18) Wide.
A-M
.405
B-M
.555
.655
.805
.920
C-M
D-M
E-M
F-M
1.110
H-M
1.300
1.415
H-M
K, M
1.535
1.715
K, M
K
1.600 K and M
45° Entry
HEIGHT
HEIGHT
HEIGHT
TOP
ENTRY
(T)
SIDE
ENTRY
(S)
45°
ENTRY
(E)
Entry Style Range
Height
Code
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
Length Top Entry Side Entry 45° Entry
(S)
(In.)
(T)
(E)
.313
—
A-F, J, K
—
.375
—
A-F, J, K
—
.438
—
A-L
—
.500
—
A-L
—
.563
A-F, J, K
A-L
A-F, J, K
.625
A-L
A-L
A-G, J, K
.688
A-L
A-L
A-L
.750
A-L
A-L
A-L
.813
A-L
—
A-L
.875
A-L
—
A-L
.938
A-L
—
A-L
1.000
A-L
—
A-L
1.063
A-L
—
A-L
1.125
A-L
—
G, H, L
1.188
G, H, L
—
G, H, L
1.250
G, H, L
—
G, H, L
1.313
G, H, L
—
G, H, L
1.375
G, H, L
—
—
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
H-5
www.glenair.com
H
Series 79
Accessories
799-016
EMI Backshell for Panel Mount Connectors
How To Order
799-016 Standard EMI Backshell
799-016 STYLE T - TOP ENTRY
A
C
B
E
D
.320
(8.13)
799-016 STYLE E - 45° ENTRY
HEIGHT
A
C
.79 (20.1)
REF
F
E
B
D
HEIGHT
2-56 (SIZES A-G, J & K)
4-40 (SIZES H & L)
.79 (20.1)
REF
799-016 STYLE S - SIDE ENTRY
A
C
E
B
.320
(8.13)
D
HEIGHT
.79 (20.1)
REF
Component
Backshell
Hardware
Material
Aluminum Alloy
Stainless Steel
799-016 DIMENSIONS
H
Shell
Size
A
B
C
D
E
F
G
H
J
K
L
M
A Max.
In.
mm.
B Max.
In . mm.
C
In.
ENTRY SIZE
D
mm.
In.
Finish
See table below
Passivated
F
mm.
In.
mm.
.760 19.30
.910 23.11
1.060 26.92
.308
.308
.308
7.82
7.82
7.82
.565 14.35
.715 18.16
.865 21.97
.190
.190
.190
4.83
4.83
4.83
.59
.59
.59
15.0
15.0
15.0
1.160 29.46
1.310 33.27
1.460 36.83
.308
.308
.308
7.82
7.82
7.82
.965 24.51
1.115 28.32
1.265 32.13
.190
.190
.190
4.83
4.83
4.83
.59
.59
.59
15.0
15.0
15.0
1.410
2.045
1.810
2.210
35.81
51.94
45.97
56.13
.395 10.03
.410 10.41
.308
7.82
.308
7.82
1.215
1.800
1.615
2.015
30.86
45.72
41.02
51.18
.275
.300
.190
.190
6.99
7.62
4.83
4.83
.68
.70
.59
.59
17.3
17.8
15.0
15.0
2.281 57.94
2.445 62.10
.410 10.41
.470 11.94
2.036 51.71
2.200 55.88
.300
.360
7.62
9.14
.70
.76
17.8
19.3
Max. Entry
Size
Code
01
01
02
02
03
03
04
04
05
05
06
06
06
07
08
08
08
09
11
10
10
11
01 thru 10; 12
12
E
In.
mm.
.255 6.48
.405 10.29
.555 14.10
.655 16.64
.805 20.45
.920 23.37
1.110 28.19
1.300 33.02
1.415 35.94
1.535 38.99
1.715 43.56
1.600 40.64
Available
Sizes
A thru M
B thru M
C thru M
D thru M
E thru M
F thru M
H thru M
H thru M
K, L
K, L
K
K and M
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
H-6
Series 79
Accessories
799-018 and 799-019
Protective Covers
How To Order
799-018 and 799-019 Protective Covers
FOR SERIES 79 MICRO-CRIMP CONNECTORS
Protect Connectors From
Damage – Machined aluminum
covers prevent ingress of water and
contamination. Plug covers provide
metal-to-metal bottoming for EMI
protection. Receptacle covers feature
conductive fluorosilicone gaskets.
Stainless Steel Fittings and Rings –
Choose small diameter eye fittings
for panel attachment. Larger rings fit
over cable jackets. Split rings can be
installed on fully assembled cables.
Polyurethane-Coated SST Wire
Rope offers high strength, excellent
abrasion resistance and good
flexibility. Or, choose Teflon® jacket for
high temperature exposure.
Braided Nylon Rope provides
excellent flexibility and good abrasion
resistance, and can be ordered with
slip knot fittings for easy installation on
any size cable.
How To Order
Sample Part Number
799-018
Part
Number
E
M
MT
Plug Cover
Nickel-PTFE
1000 Hour
Grey™
maximum
corrosion
protection and
durability
(non-reflective
grey)
ZNU
799-019
Receptacle
Cover
MB
N
6
-04
Attachment
Shell Jackscrew
Length in
Shell Finish Size
Option Lanyard Type
Inches
Electroless
Nickel
general purpose
applications
799-018
E
Zinc-Nickel with
Black Chromate
tactical
applications
(non-reflective
black)
Additional shell
finishes are
listed on page
C-9.
A
MB
C
Slotted
Fillister
Head
Jackscrew
D
MH
B
E
Hex Socket
Head
Jackscrew
F
MF
G
H
J
K
L
M
Female
Jackpost
Nylon Rope
Omit for
Attachment
Type N (no
attachment)
H
Example
N
No Attachment
G
Stainless Steel
Rope, Teflon
jacket
R
"6" equals six
inch length
Attachment Code
Omit for attachment Types N (No
Attachment) and SK (Slip Knot)
Small Ring
Stainless Steel
Rope, PVC jacket
F
Stainless Steel
Rope, Nylon
jacket
Large Ring
01
02
04
06
–
–
–
–
.126 (3.20) I.D.
.145 (3.68) I.D.
.188 (4.78) I.D.
.197 (5.00) I.D.
14
15
16
17
18
19
20
–
–
–
–
–
–
–
.385 (9.78) I.D.
.445 (11.30) I.D.
.570 (14.48) I.D.
.635 (16.13) I.D.
.695 (17.65) I.D.
.885 (22.48) I.D.
1.070 (27.17) I.D.
50
52
54
56
58
60
64
68
–
–
–
–
–
–
–
–
.420 (10.67) I.D.
.480 (12.19) I.D.
.635 (16.13) I.D.
.745 (18.92) I.D.
.885 (22.48) I.D.
1.010 (25.65) I.D.
1.125 (28.58) I.D.
1.345 (34.16) I.D.
U
Stainless
Steel Rope,
Polyurethane
jacket
T
Stainless Steel
Rope, No Jacket
Split Ring
SK
Nylon Rope with
Slip Knot
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
H-7
www.glenair.com
H
Series 79
Accessories
799-018
Protective Plug Covers
How To Order
799-018 Protective Plug Covers
799-018 DIMENSIONS
ATTACHMENT
LENGTH
JACKSCREW
TYPE MH
.320
D THREAD
TYP
GASKET
JACKPOST
TYPE MF
C
A
B
SIZE A - G, J, & K
CONFIGURATION
C
A
Shell
Size
A
B
C
D
E
F
G
H
J
K
L
M
A Max.
In. mm.
B Max.
In . mm.
In.
mm.
D Thread
.308
7.82
.785 19.94
.565 14.35
2-56 UNC
.308
7.82
.935 23.75
.715 18.16
2-56 UNC
.308
7.82 1.085 27.56
.865 21.97
2-56 UNC
.308
7.82 1.185 30.10
.965 24.51
2-56 UNC
.308
7.82 1.335 33.91 1.115 28.32
2-56 UNC
.308
7.82 1.485 37.72 1.265 32.13
2-56 UNC
.395 10.03 1.435 36.45 1.215 30.86
2-56 UNC
.410 10.41 2.170 55.12 1.800 45.72
4-40 UNC
.308
7.82 1.845 46.86 1.615 41.02
2-56 UNC
.308
7.82 2.240 56.90 2.015 51.18
2-56 UNC
.410 10.41 2.406 61.11 2.036 51.71
4-40 UNC
.470 11.94 2.570 65.28 2.200 55.88
6-32 UNC
Component
Backshell
Hardware
Gasket
C
Material
Finish
Aluminum Alloy
See Ordering Info
Stainless Steel
Conductive Fluorosilicone
Passivated
None
B
SIZE H, L & M CONFIGURATION
Lanyard options
Nylon Rope
-55° to +100°C., black, very
flexible, very good abrasion
resistance, good resistance to
fuels, .120" (3mm) diameter
Black polyurethane over stainless
steel rope, -55° to +125°C.,
very flexible, excellent abrasion
resistance, excellent resistance to
Polyurethane Coated Wire Rope fuels, .080" (2mm) diameter
H
Teflon® Jacketed Wire Rope
Slip Knot (SK)
for Attaching Covers to Cable
Translucent FEP jacket over
stainless steel, -55° to +200°C.,
fair flexibility, good abrasion
resistance, .100" diameter
55° to +100°C., black, very
flexible, very good abrasion
resistance, good resistance to
fuels, .120" (3mm) diameter.
Length includes .5" (13mm)
diameter loop.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
H-8
Series 79
Accessories
799-019
Protective Receptacle Covers
How To Order
799-019 Protective Receptacle Covers
799-019 DIMENSIONS
Shell
Size
A
B
C
D
E
F
G
H
J
K
L
M
ATTACHMENT
LENGTH
JACKSCREW
TYPE MH
GASKET
D THREAD
TYP
.160
JACKPOST
TYPE MF
C
A
B
SIZE A - G, J, & K
CONFIGURATION
A Max.
In. mm.
B Max.
In . mm.
In.
mm.
D Thread
.385
7.82
.785 19.94
.565 14.35
2-56 UNC
.385
7.82
.935 23.75
.715 18.16
2-56 UNC
.385
7.82 1.085 27.56
.865 21.97
2-56 UNC
.385
7.82 1.185 30.10
.965 24.51
2-56 UNC
.385
7.82 1.335 33.91 1.115 28.32
2-56 UNC
.385
7.82 1.485 37.72 1.265 32.13
2-56 UNC
.470 10.03 1.435 36.45 1.215 30.86
2-56 UNC
.490 10.41 2.170 55.12 1.800 45.72
4-40 UNC
.385
7.82 1.845 46.86 1.615 41.02
2-56 UNC
.385
7.82 2.240 56.90 2.015 51.18
2-56 UNC
.490 10.41 2.406 61.11 2.036 51.71
4-40 UNC
.550 11.94 2.570 65.28 2.200 55.88
6-32 UNC
Component
Backshell
Hardware
Gasket
C
C
Material
Aluminum Alloy
Stainless Steel
Conductive Fluorosilicone
Finish
See Ordering Info
Passivated
None
A
B
SIZE H, L, & M CONFIGURATION
Lanyard options
Nylon Rope
-55° to +100°C., black, very
flexible, very good abrasion
resistance, good resistance to
fuels, .120" (3mm) diameter
Black polyurethane over stainless
steel rope, -55° to +125°C.,
very flexible, excellent abrasion
resistance, excellent resistance to
Polyurethane Coated Wire Rope fuels, .080" (2mm) diameter
Teflon® Jacketed Wire Rope
Slip Knot (SK)
for Attaching Covers to Cable
Translucent FEP jacket over
stainless steel, -55° to +200°C.,
fair flexibility, good abrasion
resistance, .100" diameter
55° to +100°C., black, very
flexible, very good abrasion
resistance, good resistance to
fuels, .120" (3mm) diameter.
Length includes .5" (13mm)
diameter loop.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: sales@glenair.com
H-9
www.glenair.com
H
SERIES 79
MICRO-CRIMP
M I S S I O N - C R I T I C A L
C O N N E C T O R S
T
he Series 79 Micro-Crimp is a High-density, crimp-contact Micro-D, offering advanced
van
nced
n
ced EMI shielding
and sealing compared to standard D-subs. The connector series is ideally suited for use in missioncritical applications such as satellite payloads. Available in cable, panel-mount and PCB versions, the Micro-Crimp
features snap-in size #23 crimp contacts, snap-in Size #12 and #16 power and/or coax contacts in hybrid layouts, easy
integration into High-Reliability cable assemblies (no splicing or soldering), and guide pin versions (for blind mating).
Series 79 Micro-Crimp is the high-performance, advanced EMC and environmental protection interconnect solution.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497
• Tel: 818-247-6000 • Email: sales@glenair.com • www.glenair.com
www.glenair.com
Series 79
Index
Series 79 Micro-Crimp
Part Number Index
600-052 ....................................B-11
799-016T ................................... H-5
809-119.......................................B-5
600-052-1 .................................B-11
799-018 ..................................... H-7
809-120 ......................................B-5
600-057 ....................................B-11
799-019 ..................................... H-7
809-121 ......................................B-5
600-057-1 .................................B-11
809-001 ......................................B-2
809-122 ......................................B-6
600-058 ....................................B-11
809-002 ......................................B-2
809-123 ......................................B-6
600-061 ....................................B-11
809-005 ......................................B-8
809-124 ......................................B-8
600-083 ....................................B-11
809-013 ....................................B-10
809-125 ......................................B-8
600-083-1 .................................B-11
809-015 ......................................B-8
809-126 ......................................B-9
600-090 ....................................B-11
809-042 ......................................B-2
600-090-1 .................................B-11
809-043 ......................................B-2
790-024P ................................... D-1
809-057 ......................................B-8
790-025S ................................... D-4
809-065A ....................................B-2
790-026P ....................................E-1
809-065C ....................................B-2
790-027S ....................................E-6
809-066A ....................................B-2
790-028P ....................................F-1
809-066C ....................................B-2
790-029S ..................................F-16
809-088 ....................................B-10
790-036P ................................... G-1
809-093 ......................................B-4
790-037S ................................. G-16
809-107-1 .................................B-10
790-041P ................................... G-6
809-107-2 .................................B-10
790-042S ................................. G-21
809-107-3 .................................B-10
790-043P ....................................F-6
809-107-4 .................................B-10
790-044S ..................................F-21
809-110.......................................B-4
790-049S ..................................E-17
809-111 .......................................B-4
852-015-02 .................................B-6
790-050P ..................................E-11
809-112.......................................B-4
852-016-01 .................................B-6
799-011S ................................... H-3
809-113.......................................B-4
852-016-02 .................................B-6
799-011T ................................... H-3
809-114.......................................B-5
852-017 ......................................B-6
799-015S ................................... H-1
809-115.......................................B-5
852-018 ......................................B-6
799-015T ................................... H-1
809-116.......................................B-5
857-010 ......................................B-7
799-016E ................................... H-5
809-117.......................................B-5
857-011.......................................B-7
799-016S ................................... H-5
809-118.......................................B-5
859-006 ......................................B-8
809-127 ......................................B-9
809-128 ......................................B-8
809-129 ......................................B-9
809-130 ......................................B-9
809-131 ....................................B-10
809-132 ....................................B-10
809-133 ......................................B-9
809-134 ......................................B-9
809-135 ......................................B-8
809-136 ......................................B-8
809-137 ......................................B-8
809-138 ......................................B-8
852-015-01 .................................B-6
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
INDEX-1
www.glenair.com
E-Mail: sales@glenair.com
INDEX
Dimensions in Inches (millimeters) are subject to change without notice.
NEW FROM GLENAIR: SERIES 28
HiPer-D
MIL-DTL-24308 INTERMATEABLE
Bringing 21st Century Technology
to the World’s Most Popular
Connector Interface
The Extreme Duty D-Sub Connector
Meet the Series 28 HiPer-D. Intermateable
and intermountable with standard M24308 type
D-Subs, the HiPer-D meets the need for improved
performance in hostile environments. Unlike standard M24308
connectors with stamped steel shells, the HiPer-D is machined
achined
from aluminum or stainless steel. The dielectric inserts are made with
h
thermoset epoxy for unbeatable resistance to chemicals and are capable of 200°C continuous operating
temperature. Aerospace grade fluorosilicone grommets and face seals provide watertight sealing.
Integrated grounding fingers provide advanced electromagnetic compatibility. Best of all, the HiPer-D
is available in every standard and high-density M24308 layout and is stocked for immediate same-day
shipment.
SERIES 28 HiPer-D
The Advanced D-Sub Connector for Reliable
Performance in Hostile Environments
Product Features
•
•
•
•
•
•
•
•
•
•
Environmental, crimp removable rectangular connector
Advanced temperature, vibration and EMC/electrical performance
rma
ance
M24308/D-Sub intermatable
Fits panel and pcb footprint of M24308/D-Sub products
Available in all 11 “standard” insert arrangements
Standard Density (#20) and High Density (#22D)
EMI Spring
High Temperature Thermoset Epoxy Insulators
Watertight Sealing
Rugged Machined One-Piece Shell
Available configurations
• Crimp Termination for Attaching Wire or Cable: Standard Cable, Rear Panel Mount
and Float Mount
• Printed Circuit Board Termination for Rear Panel Mounting: Straight and Right Angle
• Free-Standing Printed Circuit Board Termination: Straight and Right Angle
Size 20HD or 22D
M39029 Pin Contact
Sealing
Compound
BeCu Contact
Retention Clip
Fluorosilicone
Grommet
BeCu Insert
Retention Clip
High Temperature
Thermoset Epoxy
Front and Rear
Insulator
Size 20HD or 22D
M39029 Socket Contact
EMI Spring
Fluorosilicone
Interfacial Seal
Machined
Aluminum or
Stainless Steel
Shell
BeCu Contact
Retention Clip
BeCu Insert
Retention Clip
Sealing
Compound
Fluorosilicone
Grommet
High Temperature
Thermoset Epoxy
Front and Rear
Insulator
Consult factory for complete ordering information
SERIES 28 HiPer-D
Connector Selection Guide
Connectors
with Pin Contacts
Crimp Termination
Printed Circuit Board
Printed Circuit Board
For Attaching Wire or Cable
For Rear Panel Mounting
Free-Standing
Standard
Cable
Rear Panel
Mount
Float
Mount
Straight
PCB
Right
Angle PCB
Straight
PCB
Right
Angle PCB
280-018P
280-020P
280-030P
280-022P
280-024P
280-026P
280-028P
Connectors with Socket
Contacts
Crimp Termination
Printed Circuit Board
Printed Circuit Board
For Attaching Wire or Cable
For Rear Panel Mounting
Free-Standing
Standard
Cable
Rear Panel
Mount
Float
Mount
Straight
PCB
Right
Angle PCB
Straight
PCB
Right
Angle PCB
280-019S
280-021S
280-031S
280-023S
280-025S
280-027S
280-029S
Consult factory for complete ordering information
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497 • Tel: 818-247-6000 • Email: sales@glenair.com • www.glenair.com
The world's broadest
selection of interconnect
products–in stock and
ready for immediate
same-day shipment
Glenair's World
of Interconnect
Solutions
Interconnect
Product
Guide CD,
featuring our
entire library
of Glenair
catalogs and
data sheets.
In addition to over a dozen product line
catalogs, the CD includes a powerful part
number development program that takes all the
pain and confusion out of ordering interconnect
components. An easy-to-use inventory search
program provides ready access to 60,000 MILSTD and commercial part numbers.
A complete overview of Glenair's
innovative range of interconnect
products and services, including
Military Standard and commercial
equivalent connectors, fiber optic
solutions and accessories.
Micro-D Twistpin
Connectors and
Accessories
Glenair offers both Military
Standard 83513 Micro-D connectors
as well as COTS selections,
backshells, mounting hardware and
more. Our TwistPin contact provides
superior performance.
Available now:
Glenair's
Series 89
Nano Miniature Connectors
+LJK3HUIRUPDQFH0LFUR'
'
&RQQHFWRUVDQG&DEOHV
0,/'7/43/¶G3URGXFWVDV:HOODVWKH
KH
:RUOG¶V/DUJHVW6HOHFWLRQRI&RPPHUFLDO6ROXWLRQV
8QLWHG6WDWHV „8QLWHG.LQJGRP „*HUPDQ\ „)UDQFH „
1RUGLF
„
,WDO\ „6SDLQ „-DSDQ
)RXUWK(GLWLRQ‡)HEUXDU\
MIL-DTL-32139 qualified
connectors for mission-critical
board to wire applications. The
world’s highest performing and
most complete .025 inch contact
d e n i s t y c o n n e c t o r o ff e r i n g .
Hundreds of part numbers in stock.
EMI/EMP Filter
Connectors
Series 28
HiPer-D Connectors
MIL-DTL-38999 type EMI/
EMP filter connectors, as well
as other Military Standard and
commercial electromagnetic
shielding technologies. Also
includes Glenair Series 80 “Mighty
Mouse” filter products.
Fully intermateable and
intermountable with standard
MIL-DTL-24308 connectors, the
Series 28 HiPer-D offers advanced
electrical, mechanical and
environmental performance for truly
mission-critical applications.
EMI/EMP
Filter Connectors
High-Reliability Military Standard
tandard
d d an
and
Commercial Connectors for
Suppression
or EMI Sup
United States
„
United Kingdom
„
Germany
„
France
„
Nordic
„
Italy
„
Spain
„
Japan
2nd Edition • September 2008
Fiber Optic
Interconnect Solutions
Series 80 “Mighty Mouse”
Connectors and Cables
Tactical fiber optic connectors,
cables, and termini for airframe,
shipboard, and military ground
vehicles. Catalog features Glenair’s
innovative high-density (GHD)
connector system for reduced size
and weight applications.
Glenair’s revolutionary connector
series that reduces interconnect
system size and weight by 50%
compared to standard MIL-DTL38999 connectors. Now used on
hundreds of mission-critical military
and commercial applications.
Fiber Optic
Interconnect Solutions
Tactical Fiber Optic Connectors, Cables and Termini
U nited
States „ U nited
K i ng d om „ G e r m a n y „ F r a nc e „ N o r d i c „ I t a ly „ Spain „ Japan
6HULHV
1DQRPLQLDWXUH&RQQHFWRUV
0,/'7/4XDOL¿HG&RQQHFWRUVIRU
0LVVLRQ&ULWLFDO%RDUGWR:LUH$SSOLFDWLRQV
8QLWHG6WDWHV
„
8QLWHG.LQJGRP
„
*HUPDQ\
„
)UDQFH
„
1RUGLF
„
,WDO\
„
6SDLQ
„
-DSDQ
6HULHV+L3HU'
'
&RQQHFWRUVDQG$FFHVVRULHV
7KH+LJK3HUIRUPDQFH'6XEPLQLDWXUHIRU
([WUHPH/DQG$LUDQG6SDFH$SSOLFDWLRQV
8QLWHG6WDWHV
„
8QLWHG.LQJGRP
„
*HUPDQ\
„
)UDQFH
„
1RUGLF
„
,WDO\
„
6SDLQ
„
-DSDQ
6HULHV
0LJKW\0RXVH
&RQQHFWRUV&DEOHV
HV
3
In
Stock !
• 43 Insert
Arrangements
7KH6KLHOGHG(QYLURQPHQWDO&RQQHFWRUZLWK
HFWRUZLLLWK
WWK
K
• Six Shell Styles
0LO6SHF3HUIRUPDQFHDQG8OWUDPLQLDWXUH6L]H
LQLDWXUH
H6
H
6LL]H
6
]H
• From One to 130
8 Q L W H G 6 W D W H V 8 Q L W H G . L Q J G R P * H U P D Q \ ) U D Q F H 1 R U G L F , W D O Crimp/PCB
\ 6 S D L Q Contacts
-DSDQ
• Point-to-Point Cordsets
„
„
Visit us at www.glenair.com and use the literature order form for immediate catalog fulfillment
„
„
„
„
„
A World of
Interconnect
Solutions
Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • sales@glenair.com
www.glenair.com
Telephone:
Glenair Power
203-741-1115
Products Group
Facsimile:
860 N. Main Street Extension
203-741-0053
Wallingford, CT
sales@glenair.com
06492
Glenair Microway Systems
7000 North Lawndale Avenue
Lincolnwood, IL
60712
Glenair Electric GmbH
Siemensstrasse 9
D-61449 Steinbach
Germany
Telephone:
847-679-8833
Facsimile:
847-679-8849
Telephone:
+49-6171-5905-0
Facsimile:
+49-6171-5905-90
Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Mansfield
Notts, NG18 5BY England
Glenair Nordic AB
Gustav III : S Boulevard 46
S - 169 27 Solna
Sweden
Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain
Telephone:
+44-1623-638100
Facsimile:
+44-1623-638111
sales@glenair.co.uk
Telephone:
+46-8-50550000
Facsimile:
+46-8-50550001
sales@glenair.se
Telephone:
+ 34-925-89-29-88
Facsimile:
+ 34-925-89-29-87
germany@glenair.com
sales@glenair.es
Telephone:
Glenair Italia S.p.A.
+39-051-780098
Via Cà dell’Orbo Nord, 22
Facsimile:
40055 Villanova di Castenaso
+39-051-782259
Bologna, Italy
info@glenair.it
Telephone:
Glenair France SARL
+33-5-34-40-97-40
7, Avenue Parmentier
Facsimile:
Immeuble Central Parc #2
+33-5-61-47-86-10
31200 Toulouse
sales@glenair.fr
France
© 2011 Glenair, Inc.
Printed in U.S.A.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Glenair:
M22520/2-35