Pump and Fluid Systems
T25 Triplex Pump
Pump Specifications
Rated (HP, kW)
25
18.6
2.36
59.9
T25H
5,060
349
T25L
1,650
114
Stroke length (in., mm)
Maximum discharge pressure (PSI, Bar)
Rated rod load (lb, kg)
3,975
1803
Intermittent duty speed, RPM
430
Maximum continuous duty speed, RPM
300
Minimum speed, RPM
90
Crankshaft dimensions (in., mm)
Diameter
2.00
50.8
Length (both sides)
4.00
101.6
.500 × .250
12.7× 6.4
Oil capacity (gal, l)
2.2
10.0
Weight (lb, kg); estimates only
615
Keyway, width × depth (in., mm)
Mechanical efficiency
279.0
90%
Standard Equipment
• Forged duplex stainless steel, or forged carbon steel
fluid ends
• Duplex stainless steel stuffing boxes
• Disc valve
Flange Connections
• Tungsten carbide coated plungers over stainless steel
base or solid ceramic plungers
Pump
Model
Discharge Connection
Sizes (in., mm)
Suction Connection
Sizes (in., mm)
T25H
1.0 (25.4) NPT
2.0 (50.8) NPT
T25L
1.5 (38.1) NPT
3.0 (76.2) NPT
• Double extended crankshaft
• Multiple plunger packing arrangements offered
Optional Accessories
• Packing lubricators
• Customized plunger packing arrangements
• Complete pump packages
Technical Support
pumps@weatherford.com
1-281-252-7867
weatherford.com/pumps
1
© 2014 Weatherford. All rights reserved.
TIS0113.00
Pump and Fluid Systems
T25 Triplex Pump
Performance Ratings
Model
(standard)
100 RPM
150 RPM
250 RPM
300 RPM
Intermittent Duty
430 RPM
Gallons Per
Revolution
Maximum
Pressure
PSI
GPM
BPD
GPM
BPD
GPM
BPD
GPM
BPD
GPM
BPD
GPM
BPD
1.000
1.250
1.500
1.750
2.000
2.250
2.500
0.0241
0.0376
0.0542
0.0738
0.0964
0.1220
0.1506
5,060
3,240
2,250
1,650
1,270
1,000
810
2.2
3.4
4.9
6.6
8.7
11.0
13.6
74
113
167
228
297
376
465
2.4
3.8
5.4
7.4
9.6
12.2
15.1
83
129
186
253
330
418
516
3.6
5.6
8.1
11.1
14.5
18.3
22.6
124
194
279
379
496
627
774
6.0
9.4
13.6
18.4
24.1
30.5
37.6
207
323
465
632
826
1,046
1,291
7.2
11.3
16.3
22.1
28.9
36.6
45.2
248
387
558
759
991
1,255
1,549
10.4
16.2
23.3
31.7
41.4
52.5
64.8
355
555
799
1,088
1,421
1,798
2,220
Plunger
Diameter
(in.)
Liters Per
Revolution
Maximum
Pressure
BAR
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
LPM
M3/hr
1.000
1.250
1.500
1.750
2.000
2.250
2.500
0.0912
0.1425
0.2052
0.2793
0.3648
0.4617
0.5700
349
223
155
114
87
69
56
8.2
12.8
18.5
25.1
32.8
41.6
51.3
0.5
0.8
1.1
1.5
2.0
2.5
3.1
9.1
14.2
20.5
27.9
36.5
46.2
57.0
0.5
0.9
1.2
1.7
2.2
2.8
3.4
13.7
21.4
30.8
41.9
54.7
69.3
85.5
0.8
1.3
1.8
2.5
3.3
4.2
5.1
22.8
35.6
51.3
69.8
91.2
115.4
142.5
1.4
2.1
3.1
4.2
5.5
6.9
8.5
27.4
42.7
61.6
83.8
109.4
138.5
171.0
1.6
2.6
3.7
5.0
6.6
8.3
10.3
39.2
61.3
88.2
120.1
156.9
198.5
245.1
2.4
3.7
5.3
7.2
9.4
11.9
14.7
T25H
T25L
Model
(metric)
90 RPM
Plunger
Diameter
(in.)
T25H
T25L
90 RPM
100 RPM
150 RPM
250 RPM
300 RPM
Intermittent Duty
430 RPM
General Notes
1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities
are lower, based on discharge pressure and fluid compressibility.
2. API-674 and NACE-compliant designs are available; consult Weatherford for details
and exceptions to these standards.
weatherford.com/pumps
2
3. For operation below 90 RPM, an auxiliary lubrication system is required.
4. Standard plunger sizes are shown, however other sizes are available upon request.
© 2014 Weatherford. All rights reserved.
TIS0113.00
Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative.
Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be
protected by one or more U.S. and/or foreign patents. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the
applicable contract between Weatherford and the client.