15
Electrical accessories
Shunt trip, undervoltage release
S1
ax
m s
o
Is CB
MC
Shunt trip
Factory installation
Voltage
48VAC/60VDC
220/250VAC
24 – 30VAC
110 – 130VAC
250VDC
110VDC
48VDC
24VDC
220VDC
K1S4
Catalog number
suffix 1
S1
S2
S3
S4
S5
S6
S7
S8
S9
Field installation 2
Catalog number
S1
K1S1
K1S2
K1S3
K1S4
K1S5
K1S6
K1S7
K1S8
K1S9
$ 212
List
price
$ 197
For remote opening of circuit breaker and includes internal cut-off switch to protect solenoid. All shunt trips are left pole mounted
and can not be used with undervoltage releases. All shunt trips are approved for use in ground fault systems. Shunt trips must
be ordered with correct connector.
Shunt trip connectors
Field installation 2
Type
Voltage
Factory
installation
Catalog number
S1
Fixed mounted
All
Included
K2C-SU
Electrical specifications
List
price
$ 15
24, 120, 240, 480VAC ~ 50/60 Hz
24, 48, 125, 250VDC –
V
For S1
P
S1 with K1S4
List
price adder
100VA~/120W–
Instananeous duty
Undervoltage releases (IEC)
Factory installation
Voltage
Catalog number
suffix 1
380/400VAC
220/230VAC
24VAC
110VAC
110VDC
48VDC
24VDC
48VAC
U1
U2
U3
U4
U6
U7
U8
U9
List
price adder
Field installation 2
Catalog number
S1
K2U1
K2U2
K2U3
K2U4
K2U6
K2U7
K2U8
K2U9
$ 212
List
Price
$ 197
Will trip circuit breaker when connected voltage drops to 35 – 70% of undervoltage release voltage rating. Will allow circuit breaker
to close (ON) when voltage is approximately 85% of rated voltage. All undervoltage releases are left pole mounted and can not
be used with shunt trips. Undervoltage releases must be ordered with correct connector.
15
Undervoltage release connectors
K2U1
Field kit 2
Type
Voltage
Factory
installation
Catalog number
S1
Fixed mounted
All
Included
K2C-SU
Electrical specifications
V
For S1
P
List
Price
$ 15
24, 120, 240, 480VAC ~ 50/60 Hz
24, 48, 125, 250VDC –
6VA~/3W–
Continuous duty
1 For factory installation add suffix given to end of circuit breaker catalog number per accessory format.
2 Not UL approved for field installation.
15.54
AC 1000 - 11/03
Discount schedule SA
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Spec Tech Industrial 203 Vest Ave. Valley Park, MO 63088 Phone: 888 SPECTECH
Fax: 636 537-1405
www.spectechind.com
15
Electrical accessories
Shunt trip, undervoltage release
S3 – S7
Is
MC oma
CB x
s
Shunt trips
Factory installation
Voltage
Field installation
Catalog number
suffix 1
480VAC/250VDC
240VAC
120VAC/125VDC
48VDC
24VAC/VDC
12VDC
List
price adder
S1
S2
S4
S7
S8
S9
Catalog numbers
S3 – S4 – S5
S6 – S7
K5S1
K5S2
K5S4
K5S7
K5S8
K5S9
$ 430
K7S1
K7S2
K7S4
K7S7
K7S8
K7S9
List
price
$ 415
K5S1
Low power shunt trips
Factory installation
Voltage
Field installation
Catalog number
suffix 1
List
price adder
SA
SB
$ 430
24VDC
120VAC
Catalog numbers
S3 – S4 – S5
S6 – S7
K5SA
K5SB
K7SA
K7SB
List
price
$ 415
For remote opening of circuit breaker and includes internal cut-off switch to protect solenoid. All shunt trips are left pole
mounted and can not be used with UVRs. Except for 12VDC, all shunt trips are approved for use in GF systems. Shunt trips
must be ordered with correct connector.
Shunt trip connectors (required)
S5 with K5S2
Type
circuit breaker
Voltage
Factory
installation 1
Fixed mounted
Plug-in/Draw-out
All
All
included
included
Field kit catalog number
S3 – S4 – S5 – S6
S7
K6C-SU
K6C-SUP
K7C-SU
K7C-SUP
List price
$ 15
Electrical specifications – shunt trips (standard)
V
24, 120, 240, 480VAC ~ 50/60 Hz
12, 24, 48, 125, 250 VDC –
For S3-S5
P
For S6-S7
100 VA~/120W–
Instantaneous duty
150 VA~/150W–
Undervoltage releases
Factory installation
K5U1
Voltage
480VAC
240VAC
120VAC
24VAC
250VDC
125VDC
48VDC
24VDC
K6C-SUP
Field installation
Catalog number
suffix 1
List
price adder
U1
U2
U4
U3
U5
U6
U7
U8
Catalog numbers
S3 – S4 – S5
S6 – S7
K5U1
K5U2
K5U4
K5U3
K5U5
K5U6
K5U7
K5U8
$ 430
K7U1
K7U2
K7U4
K7U3
K7U5
K7U6
K7U7
K7U8
List
price
$ 415
Will trip CB when connected voltage drops to 35-70% of UVR voltage rating. Will allow CB to close (ON) when voltage is
approximately 85% of rated voltage. All UVRs are left pole mounted and can not be used with shunt trips. UVRs must be
ordered with correct connector.
Undervoltage release connectors (required)
Field kit catalog number
Type
circuit breaker
Voltage
Factory
1
installation
S3 – S4 – S5 – S6
S7
List price
Fixed mounted
Plug-in/Draw-out
All
All
included
included
K6C-SU
K6C-SUP
K7C-SU
K7C-SUP
$ 15
Electrical specifications – UVR & low power shunt trips
V
24, 120, 240, 480 VAC ~ 50/60 Hz
24, 48, 125, 250 VDC –
For S3-S5
P
For S6-S7
6 VA~/3W–
Continuous duty
10 VA~/4W–
1 For factory installation add suffix given to end of circuit breaker catalog number per accessory format.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Discount schedule SA
15.55
AC 1000 - 11/03
15
15
ax
m s
o
Is CB
MC
Electrical accessories
Auxiliary contacts
S1 – S7
Auxiliary contacts — S1
Field installation 2
Factory install
Contacts
Catalog number
suffix 1
List
price adder
Catalog number
S1
List
price
2 Form Cs
1 BA & 1 C
A
BA
$ 190
K1AS
K1BA
$ 175
The auxiliary contacts are accessory contacts for the indication of circuit breaker open-closed or tripped. Bell alarm contacts
(B.A.) can be used to indicate circuit breaker tripping. All contacts are right pole mounted
Auxiliary contact connectors — S1
Field installation 2
Type
Voltage
Factory
installation
Catalog number
S1
List
price
Fixed mounted
All
Included
K2C-AB
$ 15
S1 with auxiliaries
Electrical specifications — S1
K5AS
Voltage
Maximum contact amperage rating
30 VDC
127 VDC
220 VAC
4A
4A
4A
N.O. = contact is open as circuit breaker is open
N.C. = contact is closed when circuit breaker is open
B.A. = will open/close only when circuit breaker trips
Auxiliary contacts — S3 – S7
Factory installation
Contacts
2 Form Cs
1 BA & 1 C
1 B BA & 1A + 1B
Field installation
Catalog number
suffix 1
List
price adder
A
BA
BA3
$ 275
Catalog numbers
S3 – S4 – S5
S6 – S7
K5AS
K5BA
—
365
K7AS
K7BA
K7BA-3
List
price
$ 260
350
The auxiliary contacts are accessory contacts for the indication of circuit breaker open-closed or tripped. Bell alarm contacts
(B.A.) can be used to indicate circuit breaker tripping. All contacts are right pole mounted.
K6C-ABP
15
Auxiliary contact connectors (required) — S3 – S7
Field kit catalog number
Type
circuit breaker
Voltage
Factory
installation1
S3 – S4 –- S5 – S6
Fixed mounted
Plug-in/Draw-out
All
All
included
included
K6C-AB
K6C-ABP
S7
K7C-AB
K7C-ABP
List price
$ 15
Electrical specifications
Voltage
Maximum contact amperage rating
125 VDC
250 VDC
250 VAC
0.3 A
0.15 A
6A
N.O. = contact is open as circuit breaker is open
N.C. = contact is closed when circuit breaker is open
B.A. = will open/close only when circuit breaker trips
S5 with K6C-AB
1 For factory installation add suffix given to end of circuit breaker catalog number per accessory format.
2 Not UL approved for field installation.
15.56
AC 1000 - 11/03
Discount schedule SA
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
15
Electrical accessories
Motor operators, stored energy motor operators
S3 – S7
Is
MC oma
CB x
s
Motor operator
Catalog number
S3 – S4 – S5
Voltage
240VAC/250VDC
120VAC/125VDC
48VDC
24VDC
K5M2
K5M2
K5M4
K5M7
K5M8
List
price
$ 678
For remote control of circuit breaker opening and closing.
Complete with manual operating lever, padlock device and emergency opening push-button.
When ordering the connector always specify type and version of the circuit-breaker.
The following options are also available:
– key lock for open position
– key lock for open position of two or more circuit breakers (using the same key for groups of circuit breakers)
Motor operator connectors (required)
Type
circuit breaker
Voltage
Fixed mounted
Plug-in/Draw-out
All
All
Field kit catalog number
S3 – S4 – S5
K6C-M
K6C-MP
List
price
$ 15
Electrical specifications
120, 240VAC ~ 50/60 Hz
24, 48, 125, 250 VDC –
V
S4 with K5M2
P inrush
P normal
Close time
500 VA~/500W–
350 VA~/500W–
0.1 s
Open time
0.1 s
Stored-energy motor operator
Catalog number
Voltage
K6C-M
S6
240VAC/250VDC
120VAC/125VDC
48VDC
24VDC
K6M2
K6M4
K6M7
K6M8
S7
K7M2
K7M4
K7M7
K7M8
List
price
$ 2407
• Stored-energy motor operator with springs automatically pre-loaded by motor.
• Complete with shunt opening and closing release, and compartment door flange.
• When ordering the connector always specify type and version of the circuit-breaker.
• The following options are also available:
– key lock for open position
– key lock for open position of two or more circuit-breakers (using the same key for groups of circuit-breakers).
15
Stored-energy motor operator connectors (required)
Field kit catalog number
Type
circuit breaker
Voltage
Fixed mounted
Plug-in/Draw-out
All
All
S6
K6C-M
K6C-MP
S7
K7C-M
K7C-MP
List
price
$ 15
K6M2
Electrical specifications
V
120, 240 VAC ~ 50/60 Hz
24, 48, 125, 250 VDC –
P inrush
P normal
Close time
660 VA~/600W–
180 VA~/180W–
0.09 s
Open time
1.2 s
Reset time
2.0 s
S7 with K7M4
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Discount schedule SA
15.57
AC 1000 - 11/03
15
ax
m s
o
Is CB
MC
External accessories
Lugs and termination kits
S3 – S7
Standard cable lug kits
K4TB
Set of 2
catalog
number
Wire
range
Amps1
For breakers
List
price
Set of 3
catalog
number
List
price
S3
S3 – S4
S3 – S4
S3 – S4 – S5
S4
60
100
150
225
250
14AWG
14AWG
2AWG
4AWG
6AWG
–
–
–
–
–
2AWG
1/0
4/0
300kcmil
350kcmil
K3TA-2
K4TB-2
K4TC-2
K4TD-2
K4TE-2
$4
4
4
10
20
K3TA
K4TB
K4TC
K4TD
K4TE
$6
6
6
15
30
S5
S5
S6
S6
S7
300
400
600
800
1200
250kcmil
(2) 3/0
(2) 250kcmil
(3) 2/0
(4) 4/0
–
–
–
–
–
500kcmil
250kcmil
500kcmil
400kcmil
500kcmil
K5TF-2
K5TG-22
K6TH-2
K6TJ-22
K7TK-2
30
30
50
90
120
K5TF
K5TG2
K6TH
K6TJ2
K7TK
45
45
75
135
180
Standard cable lugs, for use on line and load side of circuit breaker. Suitable for use with Cu or Al. Special versions available
with taps and screws for control wire connection. Note: S6 and S7 lugs are Al9Cu (90°C); all others Al7Cu (75°C).
Standard cable lug kits with control power taps
K4ET-250
Set of 2
catalog
number
Wire
range
Amps1
For breakers
List
price
Set of 3
catalog
number
List
price
S3 – S4
S3 – S4
S3 – S4 – S5
S4
100
150
225
250
14AWG
2AWG
4AWG
6AWG
–
–
–
–
1/0
4/0
300kcmil
350kcmil
K4TB-2C
K4TC-2C
K4TD-2C
K4TE-2C
$8
8
14
24
K4TBC
K4TCC
K4TDC
K4TEC
$ 12
12
21
36
S5
S5
S6
S6
S7
300
400
600
800
1200
250kcmil
(2) 3/0
(2) 250kcmil
(3) 2/0
(4) 4/0
–
–
–
–
–
500kcmil
250kcmil
500kcmil
400kcmil
500kcmil
K5TF-2C
K5TG-2C2
K6TH-2C
K6TJ-2C2
K7TK-2C
34
34
54
94
124
K5TFC
K5TGC2
K6THC
K6TJC2
K7TKC
51
51
81
141
186
Extended front termination kits
K4TES
Suitable for
use with
S3 – S4
S5
S6
S6
S7
Maximum
amps
Set of 6
catalog number
List
price
250
400
630
800
1250
K4ET-250
K5ET-400
K6ET-600
K6ET-800
K7ET-1250
$ 46
114
150
170
240
For adding onto standard circuit breaker front terminals, extending available connection area for user termination. Suitable for
spaded cable or bus connection. S3 – S5 include terminal covers.
15
Saddle cable lug kits (Cu cable only)
K4TER
Suitable for
use with
Max
amps
Wire
range
Set of 6
catalog number
List
price
S3 – S4
250
14AWG – 250kcmil
K4TES
$ 30
S5
400
250kcmil – 500kcmil
K5TGS
90
These special non-aluminum cable lugs are for use with copper cable. Lugs are intended for use with copper cable or where
non-aluminum connectors are required (marine, salt or corrosive environments).
Rear cable lug kits (Cu cable only)
Suitable for
use with
Max
amps
S3 – S4
S5
S6
S6
250
400
600
800
Wire
range
Set of 6
catalog number
6AWG – 250kcmil
250kcmil – 500kcmil
(2) 2/0 – 350kcmil
(3) 250kcmil – 350kcmil
K4TER
K5TGR
K6THR
K6TJR
List
price
$ 30
90
150
170
For use where cable connection from the back-rear of the breaker is desired.
Distribution cable lug kit
K4TN
Suitable for
use with
Max
amps
S3 – S4
S5
250
400
Wire
range
(6) #14 - 6
(6) #14 - 1/0
Set of 3
catalog number
List
price
K4TN
K5TGD
$ 125
240
1 Suggested lugs for circuit breaker up to amps shown. Cable size and type determine maximum amperes.
2 Includes required lug covers.
15.58
AC 1000 - 11/03
Discount schedule SA
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
15
External accessories
Rotary and variable depth handle operators
S1 – S7
Is
MC oma
CB x
s
Rotary handle operating mechanism
Catalog
number
Frame
S3 – S4 – S5
S6
S7
List
price
K5RH
K6RH
K7RH
$ 108
124
145
Mounts directly onto breaker. Includes door interlock to prevent CB door opening while CB is in ON position. Padlock
provision included to padlock CB in open position. Can also be key locked with optional cylinder lock assembly. Door interlock
bracket must be ordered separately, if required. See page 15.62.
K5RH
Variable depth rotary handles
New pistol type 1, 3R, 12
Frame
S1
OHB65J10
Catalog number
mechanism
List
price
Shaft catalog number
(length in inches)
K2VD-M
$ 59
S3–S4–S5 K5VD-M
49
List
price
OXP10X148 (5.8)
OXP10X225 (8.9)
OXP10X500 (19.7)
$ 24
26
32
Handle catalog number
(length in inches)
List
price
OHB45J10
OHG45J10
OHB65J10
OHG65J10
(1.8)
(1.8)
(2.6)
(2.6)
$ 70
OHB95J10
OHG95J10
(3.7)
(3.7)
80
S6
K6VD-M
80
OHB125J10
OHG125J10
(4.9)
(4.9)
90
S7
K7VD-M
80
OHB175J10
OHG175J10
(6.9)
(6.9)
100
Handle catalog number
(length in inches)
List
price
Pistol type 4, 4X
OHB95J10
Frame
S1
OHB125J10
Catalog number
mechanism
List
price
Shaft catalog number
(length in inches)
K2VD-M
$ 59
S3–S4–S5 K5VD-M
49
List
price
OXP10X148 (5.8)
OXP10X225 (8.9)
OXP10X500 (19.7)
$ 24
26
32
OHB45L10
OHG45L10
OHB65L10
OHG65L10
(1.8)
(1.8)
(2.6)
(2.6)
$ 110
OHB95L10
OHG95L10
(3.7)
(3.7)
120
S6
K6VD-M
80
OHB125L10
OHG125L10
(4.9)
(4.9)
130
S7
K7VD-M
80
OHB175L10
OHG175L10
(6.9)
(6.9)
140
Square type 1
S1
K2VD-M
S3–S4–S5 K5VD-M
S6
K6VD-M
S7
K7VD-M
$ 59
49
80
80
K5VD-S12
K7VD-S20
$ 24
27
K2VD-H
K5VD-H
K7VD-H
K7VD-H
$ 25
25
28
28
NOTE: Complete assembly requires a mechanism, shaft and handle.
Variable depth shaft support
K5VD-M, K5VD-S12,
K5VD-H
For frames
Catalog
number
List
price
S3 – S4 – S5
K5VD-LSS
$ 25
New pistol handle catalog number explanation
OHB
125
J
10
Shaft size (diameter in mm)
J = Type 1, 3R, 12
L = Type 1, 3R, 4, 4X, 12
Physical size (length in mm)
Color
B = black
G = gray
Y = yellow / red
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Discount schedule SH
15.59
AC 1000 - 11/03
15
15
ax
m s
o
Is CB
MC
External accessories
Flange handle operators
S1 – S6
Flange handle
Solid shaft linkage
NEMA
type
Breaker
S1
Complete
handle kit
K2FHD-12S12
1,3R,12 K2FHD-17S12
K2FHD-22S12
K2FHD-12S4
K2FHD-17S4
K2FHD-22S4
4, 4X
S3
K3FHD-12S12
1,3R,12 K3FHD-17S12
K3FHD-22S12
K3FHD-12S4
K3FHD-17S4
K3FHD-22S4
4, 4X
S4
K4FHD-12S12
1,3R,12 K4FHD-17S12
K4FHD-22S12
K4FHD-12S4
K4FHD-17S4
K4FHD-22S4
4, 4X
K7FHD-HS12
S5
K5FHD-12S12
1,3R,12 K5FHD-17S12
K5FHD-22S12
K5FHD-12S4
K5FHD-17S4
K5FHD-22S4
4, 4X
S6
K6FHD-12S12
1,3R,12 K6FHD-17S12
K6FHD-22S12
K6FHD-12S4
K6FHD-17S4
K6FHD-22S4
4, 4X
List
price
$ 240
248
255
Mechanism
only
List
price
Shaft
only
Shaft
length
List
price
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
$ 19
27
34
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
K7FHD-S12
K7FHD-S17
K7FHD-S22
Handle
only
List
price
K7FHD-HS12
$ 93
19
27
34
K7FHD-HS4
133
12
17
22.5
19
27
34
K7FHD-HS12
93
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS4
133
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS12
93
280
288
295
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS4
133
240
248
255
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS12
93
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS4
133
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS12
93
K7FHD-S12
K7FHD-S17
K7FHD-S22
12
17
22.5
19
27
34
K7FHD-HS4
133
280
288
295
240
248
255
280
288
295
K2FHD-M
K3FHD-M
240
248
255
280
288
295
523
531
538
K4FHD-M
K5FHD-M
K6FHD-M
$ 128
128
128
128
411
563
571
578
Available as complete kits including flange handle, shaft and breaker operating mechanism. Mechanism mounts directly onto
breaker and shaft can be cut to the desired length for the breaker enclosure. Door is interlocked with the handle when the
breaker is in the closed (ON) position; handles include interlock defeater for emergency override. Handle can be padlocked in
the open (OFF) position. Can be field converted for left hand mounting.
Door hardware kits — Solid shaft linkage & S1 - S2 Cable operated
15
Catalog
number
Item
Door hardware kit, right hand, 2 point latch for enclosures less than 40 inches high
Roller for 3 point latch, add to FH-DHK
FH-DHK
FH-3RL
List
price
$ 150
30
Enclosure depths
Minimum
Breaker
Depth (inches)
S1
S3 - S5
S6
8
10
11
Maximum
For maximum depth, add 4 inches to the shaft length
1 Cable not included.
15.60
AC 1000 - 11/03
Discount schedule SH
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
15
External accessories
Flange handle operators
S1 – S7
Is
MC oma
CB x
s
Flange handle
Cable linkage
NEMA
type
Mechanism
only
List
price
1,3R,12
K2FHDC-M
$ 198
K6FHDC-036
K6FHDC-060
36”(91cm)
60”(152cm)
$ 114
146
4, 4X
K2FHDC-M
198
K6FHDC-036
K6FHDC-060
36”(91cm)
60”(152cm)
1,3R,12
K4FPM
110
4, 4X
K4FPM
110
1,3R,12
K5FPM
128
4, 4X
K5FPM
128
K5C036
K5C048
K5C060
K5C072
K5C084
K5C096
K5C108
K5C120
1,3R,12
K6FPM
220
4, 4X
K6FPM
220
1,3R,12
K7FPM
220
K7C048
K7C060
K7C072
K7C084
K70096
K7C120
4, 4X
K7FPM
220
Breaker
S1
S3-S4
S5
S6
S7
K7FCH
Cable
only
Cable
length
List
price
Handle
only
List
price
K7FHD-HS12
$ 93
114
146
K7FHD-HS4
133
36” (91cm)
48” (122cm)
60” (152cm)
72” (183cm)
84” (213cm)
96” (244cm)
108" (274cm)
120" (305cm)
114
146
160
175
204
221
238
256
K5FCH
213
K5FCH4
243
K5FCH
213
K5FCH4
243
48” (122cm)
60” (152cm)
72” (183cm)
84” (213cm)
96” (244cm)
120” (305cm)
190
220
256
270
320
350
K7FCH
310
K7FCH4
415
K7FCH
310
K7FCH4
415
Notes: For complete assembly; mechanism, cable and handle are required.
All cables mount onto the right side of the breaker.
Handle can be mounted on the right or left side.
Door hardware kits — S3 - S7 Cable operated
Catalog
number
Item
Door hardware kit, right hand, 2 point latch for enclosures less than 40 inches high
Door hardware kit, right hand, 3 point latch for enclosures 40 inches high or greater
KDH2R
KDH3R
List
price
$ 200
225
Enclosure depths
Minimum
Breaker
Depth (inches)
S1 - S6
S7
8
10
15
Maximum
Maximum depth is determined by cable length.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Discount schedule SH
15.61
AC 1000 - 11/03
15
ax
m s
o
Is CB
MC
External accessories
S1 – S7
Front locking device
Catalog
number
Item
K5LD
S1
S3 – S4 – S5
S6
S7
K1LD
K5LD
K6LD
K7LD
S3 – S4 – S5
S6
S7
K5LDW 1
K6LDW 1
K7LDW 1
List
price
$ 14
14
16
20
14
16
20
Mounts directly onto front of CB. Includes padlock device for locking CB in open position. Can be used as a manual handle
block, with padlock or with optional key lock accessory. Optional door interlock kit that will prevent CB door from opening while
CB is in the closed (ON) position.
Door interlock bracket
Catalog number
S3 – S7
Item
Bracket
K7DB
List
price
$5
Key locks
Catalog number
Accessory
Keys
Electric operator
different
same
K5KL-EO
K5KL-EO-2
K7KL-EO
K7KL-EO-2
Rotary HM & locking device
different
same
K7KL
K7KL-2
K7KL
K7KL-2
K7KL
S3 – S4 – S5
S6 – S7
List
price
$ 25
Keyed cylinder locks are available for mounting onto Isomax electric operators, rotary handle mechanisms and front locking
devices. Key locks can be for one individual circuit breaker (different keys in each order) or for two circuit breakers using the
same key.
Terminal covers for fixed circuit breakers
Low profile
catalog number
Frame
K6LC
S1
S3 – S4
S5
S6
S7
List
price
High profile
catalog number
$8
8
12
18
40
K1LCH
K4LCH
K5LCH
K6LCH
––
K1LC
K4LC
K5LC
K6LC
K7LC
List
price
$ 16
16
24
32
––
Both high and low types are available for fixed circuit-breakers. Covers provide IP40 degree of protection for fixed mounted
circuit breakers. Lug covers are required and included as standard with S5 400A and S6 800A cable lug kits. Covers up to S6
can be sealed with lug cover seal shown in next section.
15
Terminal cover seals
Used with
LC covers
Suitable for use with breakers
K6LCH
S3 – S4 – S5 – S6
K6LC-S
List
price
$5
These screws prevent the terminal covers from being removed.
DIN rail mounting kits
K6LC-S
Suitable for use with breakers
Catalog
number
S1
S3
S4
S5
K1DMB
K3DMB
K4DMB
K5DMB
List
price
$ 11
24
26
38
Kit consists of mounting bracket to fix S3-S5 breakers onto 75mm DIN rail (EN 50023 rail) and includes 45mm high front face
plate to match up with miniature circuit breakers and manual motor starters. S1 breaker mounts on 35mm DIN rail.
Mechanical interlock plate
K3DMB
Frame
Horizontal
catalog number
List
price
Vertical
catalog number
S3
S4
S5
S6
S7
K3MI-H
K4MI-H
K5MI-H
K6MI-H
K7MI-H
$ 570
570
590
620
630
K3MI-V
K4MI-V
K5MI-V
K6MI-V
K7MI-V
List
price
$ 570
570
590
620
630
Provides for mounting of two similar breakers on a single mounting plate. CBs are interlocked via a “walking beam” type
interlock, preventing breakers from being ON or closed at the same type. Both breakers can be OFF or tripped. MIP is
available in two versions, one with breakers mounted horizontally and then also a version for vertical mounting of breakers.
1 Required for drawout breakers.
15.62
AC 1000 - 11/03
Discount schedule SA
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
15
Accessories
S1 – S7
IEC
Is
MC oma
CB x
s
Rear connected stud kits1
For
breakers
Max.
amps
S3 – S4
S5
S6
S7
250
400
800
1200
Set of 6
catalog number
K4RC
K5RC
K6RC
K7RC
List
price
$ 87
225
280
340
Provides means to connect breakers directly onto rear bus bars.
K4RC
Rear plug-in and draw-out circuit breakers
Isomax breakers are available in both rear plug-in and complete draw-out configurations. Plug-in breakers can be rear bus,
front bus or front cable connected and are available up to the S5 400A size. The draw-out configuration uses a unique racking
system and is available for all breakers from S3 through S7.
Plug-in (3 pole)1
Separate kits fixed and movable
Fixed base kit
Movable kit
Rear plug-in & drawout
circuit breakers
Frame
Movable
List price
S1
S3
S4
S5
K1PMK
K4PMK
K4PMK
K5PMK
$ 171
203
203
238
List price
$ 171
190
203
278
Rear conn.
K1PFR
K3PFR
K4PFR
K5PFR
List price
Front bus
$ 207
230
243
278
K1PC2
K3PF
K4PF
K5PF
List price
$ 342
393
406
516
Rear conn.
K1PR
K3PR
K4PR
K5PR
List price
$ 378
433
446
516
Draw-out (3 pole) 13
Separate kits fixed and movable
Fixed base kit
Movable kit
K7TUT
Front bus
K1PFC2
K3PFF
K4PFF
K5PFF
Complete plug-in kits
Includes both fixed and movable portion
Frame
Movable
List price
Front bus
List price
S3
S4
S5
S6 Horiz
S6 Vert
S7 Horiz
S7 Vert
K4WMK
K4WMK
K5WMK
K6WMK
K6WMK
K7WMK
K7WMK
$ 203
203
278
523
523
821
821
K3WFF
K4WFF
K5WFF
K6WFF
K6WFF
K7WFF
K7WFF
$ 230
283
318
1346
1346
2111
2111
Complete draw-out kits
Includes both fixed and movable portion
Rear conn.
List price
K3WFR
K4WFR
K5WFR
K6WFR-H
K6WFR-V
K7WFR-H
K7WFR-V
$ 270
323
318
1346
1346
2111
2111
Front bus
K3WF
K4WF
K5WF
K6WF
K6WF
K7WF
K7WF
List price
Rear conn.
List price
$ 433
486
596
1869
1869
2932
2932
K3WR
K4WR
K5WR
K6WR-H
K6WR-V
K7WR-H
K7WR-V
$ 473
526
596
1869
1869
2932
2932
Movable kit = parts needed to modify standard CB to movable type.
Fixed base kit = fix mount onto panel.
Ext Fr bus = fixed base with line and load side extended front bus connectors. (FF)
Rear Conn. = fixed base with line and load side rear bus connectors. (FR)
Complete kit = includes all parts required for plug-in or draw-out connection; does not include CB.
Plug-in = open breaker can be physically removed from fixed base without disconnecting cable or bus from fixed base. (P)
Draw-out = also known as withdrawable, breaker can be removed from fixed base via a through the door crank. Includes
ON, TEST and OFF position. (W)
Four pole versions (plug-in and/or draw-out)
Take the above list prices times 1.35 for four (4) pole versions and add "-4" to the end of the catalog number.
Draw-out crank
Isomax
frames
Catalog
number
List
price
S1 – S7
K7WCR
$ 20
Set of 6
List price
Cable termination kits (3 pole only)1
Compression type cable lug kit used to modify extended front bus connectors for direct cable connection.
Frame
S3
S4
S5
K4FCT
K4FCT
K5FCT
$ 72
72
86
Hand-held test kit (for all electronic trip types)
Isomax
frames
S4 – S5 – S6 – S7
Catalog
number
K7TUT
List
price
$ 210
Isomax hand-held test kit is used to both test and exercise microprocessor trip units in breakers S4 through S7. Unit includes
test forks that insert into the test plugs on all Isomax microprocessor trip units. Tester generates 15VDC signal that performs
diagnostic on electronic trip functions and will confirm test by tripping the CB. Will not test S3 nor any molded case switch
versions.
1 IEC ratings only.
2 Front cable connection.
3 Requires front locking device to prevent drawout while breaker is closed.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Discount schedule SA
15.63
AC 1000 - 11/03
15
15
ax
m s
o
Is CB
MC
Notes
15
15.64
AC 1000 - 11/03
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com