PRO
PRODUCT PB PRO15
SERIES
DESCRIPTION
CATEGORY
TYPE:
POWER
AMPLIFIERS
Clean, reliable power is vital to protecting the gear in your rack systems. Designed with convenience and versatility in mind, the PowerBrite series of power conditioners are exceptionally useful in any rack. From the simplicity of the powerstrip to the large, easy-toread front panel metering system on the PowerBrite15
Pro, PowerBrites from Samson are a necessity in any rack system.
> 19-inch rack mount power conditioner with
LED lighting
> 8 rear panel AC outlets plus an additional front panel convenience outlet
> 3-point protection: surge protection, peak voltage spike clamping and RFI/EMI filtering
> Lifetime guaranteed high-intensity LED lamps with dimmer control
> Rear rack lighting with included LED gooseneck lamp
> Dual digital multi-meters display input voltage and load amperes of both the switched and unswitched outlets
The Powerbrite PB15 Pro shall be a 19 inch standard rack mount power conditioner. It shall have a front panel unswitched convenience outlet and a front panel power switch to turn on or off the 8 rear panel power outlets. The
PB15 Pro shall have power surge protection, peak voltage spike protection and RFI/EMI power filtering. The PB15
Pro shall also have a front panel resettable 15 amp circuit breaker to protect equipment plugged into the rear outlets.
It shall also have two front panel retractable lamp tubes with LED lamps with a dimmer control for lighting rack units mounted below and shall have digital voltage and amperage
LED metering. The PB1 shall also have a rear panel LED gooseneck light for lighting of the rear panel.
FRONT PANEL
BACK PANEL
©2007 Samson v1.1 2/07
PRODUCT SPECIFICATION SHEET
SERIES DESCRIPTION
Number of Outlets ...........................8 switched, 1 unswitched
Max. Current .................................. 15 Amp (circuit breaker protected)
Input Voltage (RMS) .......................0 to 130 Vac continuous
Spike Protection Mode ..................... Hot to Neutral, Hot to
Ground, and Neutral to Ground
Max. Clamping Voltage (@ 50 A) ......340 Vac
Response Time ...............................1 nanosecond
Max. Surge Current ........................ 6,000 Amps
(8 x 20µS pulse)
Max. Spike Energy ..........................70 Joules per leg
Noise Attenuation ........................... >20 dB, 1.5 MHz to 200 MHz
Power Cord ...................................Attached, 14 gauge
LED Light Life (Typical) ..................100,000 Hours
Weight ............................................
7.0 lbs. • 3.2 kg
Dimensions (H x W x D) ................... 1.75” x 19” x 7.5”
44mm x 482mm x 183mm
CATEGORY
PB PRO15
433mm
TOP
482mm
FRONT
44mm