S ES ®
SES®-LEISTER Triac S heat gun
for professional use
high performance - continuous operating
This double insulated heat gun is fitted with a sophisticated electronic system. It produces hot air of progressive adjustable
temperature from 20 to 700°C maxi, regardless of the used nozzle and voltage variations.
Double insulation.
Each gun is supplied with a disk where the temperatures corresponding to potentiometer positions are displayed.
The TRIAC heat gun is delivered without nozzle.
- Body
- Heating temperatures
- Tube outlet
- Current
- Power
- Output
- Weight
- Dimensions
:
:
:
:
:
:
:
:
plastic
adjustable between
20 and 700°C
32 mm Ø
220 Volt
1600 Watt
230 l/min
1350 g
330 x 110 x 64 mm
33
type
article number
1A 0594 0001 000 Adjustable temperature: 20 to 700°C
1
33
0594 0011 000 1550 Watt - 20 to 700°C
1
31 A
0594 0016 000 Deflector with normal oblique nozzle Ø 5
1
30 B1
0594 0013 000 Flat deflector 40 mm
1
LEISTER Triac S air gun
Spare heating elements
Accessories
50 B
52 B
63
0594 0012 000 Spoon deflector Ø 30 mm
0594 0014 000 Spoon deflector Ø 50 mm
0594 0015 000 Support
1
1
1
31 A
50 B
30 B1
52 B
63
D7/3-01
III/11
i
D7/3-01
S ES ®
SES®-LEISTER ELECTRON heat gun
for professional use
high performance continuous operating
ELECTRON ST
Body:
plastic
Operating temperatures: 40 to 650°C
Output:
400 to 500 l/min
Current:
230 V - 50 Hz
Tension:
3400 W
Dimensions:
338 x 90 x Ø 56 mm
Weight:
1100 g
Specification:
- equipment, special machinery, equipped with a sophisticated electronic system.
- progressively adjustable temperature with whichever nozzle is used and
regardless of the nozzle used.
- outside tube Ø 50 mm.
- equipped with 2 air filters, removable quickly, easy maintenance.
- Low weight and ergonomic design for a better grip.
type
art. no.
Heat gun LEISTER ELECTRON ST
ST 0594 0002 000
145.606
0594 0027 000
37 A
0594 0022 000
Adjustable temperature from 40 to 650°C
Heating element with 1 pin
Accessories
55
56
63
double insulation
0594 0023 000
0594 0024 000
0594 0015 000
1
230 V - 3300 Watt
1
Flat deflector 70 x 10 mm
1
Sieve deflector Ø 110 mm
1
Sieve deflector Ø 75 mm
Support
145.606
37 A
1
55
1
56
Clean
The two air filters are
cleaned and removed
within seconds.
D7/3-02
Continous
Adjusting of the temperature
of the single air up to 650°C.
63
IV/14
i
D7/3-02
S ES ®
Heat gun SES®
LEISTER HOTWIND PREMIUM
High performance - for professional use continuous use
HOTWIND PREMIUM
Material:
body: plastic
Operating temperatures: adjustable between 20 to 650°C
Airflow:
200 to 900 l/min
Current:
230 V - 50 Hz
Power:
3700 W
Weight:
2200 g
Dimensions:
332 x 179 x 106 mm
Specification:
- Sophisticated electronic system
- NO carbon engine ensuring its longevity
- Adjustable heating power continuously by potentiometer
- Cooling key
- Tube Ø 62 mm
- Extremely quiet
type
article number
Heat gun LEISTER PREMIUM
PREMIUM 0594 0050 000 Adjustable temperature between
20 to 650°C
1
36 B1
0594 0055 000 Nozzle deflector Ø 40 mm
1
37 B2
0594 0057 000 Flat deflector 85 x 15 mm
1
Accessories
37 B1
0594 0056 000 Flat deflector 150 x 12 mm
36 B1
37 B1
1
37 B2
Adjustable heating
power continuously by
potentiometer.
D7/3-03
Automatic cooling
function of the device.
III/15
i
D7/3-03
S ES ®
SES-®LEISTER Ghibli hot air gun
for continuous operation
The SES-LEISTER Ghibli hot air gun is technically very advanced, its motor is fitted with a 2 steps switch and a sophisticated
electronic system to produce hot air from 3 to 350 l/min and progressive adjustable temperatures from 20 to 600°C, regardless
of the nozzles used.
Double insulated.
The SES-LEISTER Ghibli is supplied without nozzle.
-
Body
Heating temperatures
Nozzle outlet
Current
Power
Output
- Weight
- Dimensions
- Noise level dB(A)
:
:
:
:
:
:
:
:
:
plastic
adjustable from 20 to 600°C
22 mm Ø
220 Volt 50/60 Hz
1860 Watt
max. 350 l/min; in 2 steps
with manually operated switch
1200 g with 3 m cable
160 x 195 x 92 mm
67
type
article number
power
Watt
temperature
°C
1P4
0594 0400 000
1860
20 → 600
1
33A.11.107
0594 0410 000
1860
20 → 600
1
31 G
0594 0411 000 Standard Nozzle Ø 5 mm
50 P
0594 0413 000 Curved deflector 25 x 30 mm
Heat gun SES-LEISTER Ghibli (without nozzle)
Spare heating elements
Accessories
50 B3
D7/3-04
0594 0412 000 Curved deflector Ø 34 mm
1
1
1
II/14
31 G
50 B3
50 P
i
D7/3-04