Standard FiberGuide® Fibre Raceway System
Introduction ..............................................................7.3
Features & Benefits ....................................................7.4
New Products ............................................................7.5
System Description ....................................................7.6
Patch Cord Densities ..................................................7.7
Applications ..............................................................7.8
2x2 System
Fittings ..............................................................7.17
Downspouts and Attachments............................7.18
Straight Section and Junction ............................7.19
2x6 System
Fittings and Downspouts ....................................7.20
Straight Section and Junction ............................7.22
4x4 System
Fittings ..............................................................7.24
Downspouts and Attachments............................7.26
Straight Section and Junction ............................7.28
4x6 System
Fittings ..............................................................7.30
Downspouts and Attachments............................7.32
Straight Section and Junction ............................7.34
4x12 System
Fittings ..............................................................7.36
Downspouts and Attachments............................7.38
Straight Section and Junction ............................7.40
www.adckrone.com
7.1
Fibre Cable Raceway Systems
Fibre Connectivity Solutions
•
6356_au
•
7/06
Fibre Cable Raceway Systems
Fibre Cable Raceway Systems
Fibre Connectivity Solutions
Continued
Express Exit™ Family
4-Inch Express Exit™ ............................................7.42
2-Inch Express Exit™ ............................................7.43
Vertical Slotted Duct System ....................................7.44
Support Kits ............................................................7.46
Accessories ..............................................................7.50
Standard FiberGuide® System Part Dimensions
2x2 System ........................................................7.53
2x6 System ........................................................7.55
4x4 System ........................................................7.57
4x6 System ........................................................7.60
4x12 System ......................................................7.62
Express Exit™ Family ............................................7.65
2x2 System Support Kits ....................................7.66
•
2x6, 4x4, and 4x6 System Support Kits ..............7.67
•
7/06
Fibre Cable Raceway Systems
6356_au
4x12 System Support Kits ........................................7.69
7.2
www.adckrone.com
FiberGuide® Fibre Management System
Introduction
The Industry’s Most Comprehensive Optical Raceway System
The FiberGuide raceway system is designed to protect and route fibre optic patch cords, multi-fibre cable
assemblies and intrafacility fibre cable (IFC) to and from fibre splice enclosures, fibre distribution frames
and fibre optic terminal devices. The FiberGuide system ensures a 50mm minimum bend radius is
maintained throughout. And new tool-less SnapFit™ junctions, cover options and Express Exit™ drops significantly reduce the amount of time required for installation.
The FiberGuide system is a complete set of products designed and manufactured to ensure total offframe protection and ease of use. Basic components include horizontal and vertical straight sections,
horizontal and vertical elbows, downspouts, junctions and numerous support hardware and flex-tube kits.
Available in a variety of sizes:
2x2 – Ideal for smaller installations or for vertical routing of a
maximum of four hundred 2mm fibre optic patch cords. All 2x2
FiberGuide products are shipped with covers.
2x6 – Designed for height-restricted environments, this robust
system provides the same support and system flexibility of the
traditional 4-inch-high system while saving 2 inches of overhead
space. It features a maximum capacity of 1,200, 2mm patch cords.
4x4 – Features the maximum capacity to support 1,600, 2mm patch
cords. It has been engineered to allow straight sections to be selfsupporting over a span of up to 1.83m.
Fibre Cable Raceway Systems
4x6 – Features the same benefits of the 4-inch system and a maximum trough capacity of 2,400, 2mm patch cords.
7/06
•
6356_au
•
Fibre Connectivity Solutions
ADC KRONE’s FiberGuide® raceway offers the greatest breadth of optical raceway products in the industry. In response to customer requirements, ADC KRONE continues to innovate and improve the FiberGuide
system, adding greater flexibility and driving down installation time to ensure
a smooth deployment.
4x12 – The largest system in the FiberGuide family, this 12-inch-wide
trough has a maximum capacity to support nearly 5,000, 2mm patch
cords. Perfect for runs over fibre frame lineups and perimeter routes.
See page 7.7 for patch cord density tables.
www.adckrone.com
7.3
FiberGuide® Fibre Management System
Features and Benefits
Speed of Installation
The FiberGuide® system features a variety of products that allow for quick and easy installation.
Express Exit™ drops as well as tool-less products including Snap-Fit™ junctions, snap-on covers and
new hinged cover options save valuable time for installers.
Speed of Deployment
The Express Exit system enables new drops to be added or removed quickly and easily. A drop can be
added into a fully loaded raceway in seconds—without cutting.
Raceway Flexibility
The FiberGuide system features 38 support structures, over 75 fittings, multiple drop options and
several other components to suit any application you create.
Fibre Protection
ADC KRONE’s broadband expertise translates into maximum protection for your network. 50mm
minimum bend radius is maintained throughout the system regardless of the raceway size.
Strength and Durability
•
100% raceway reliability—stands up to any challenge.
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Features and Benefits
7.4
www.adckrone.com
FiberGuide® Fibre Management System
New Products
ADC KRONE continues to add innovative products to the
FiberGuide® fibre management system to ensure it remains the
most comprehensive solution for all optical raceway requirements
and applications. These new products increase functionality and
flexibility and are compatible with existing raceway components.
To reduce installation time, ADC KRONE introduces tool-less
Snap-Fit™ and hinged cover options. Featuring simple, durable
plastic hardware, these covers install in minutes and require no
tools. The hinged cover option provides easy access, enabling
installers and technicians to deploy the product quickly and
easily. In addition, the covers do not need to be fully opened
for maintenance.
NEW Hinged Cover System
Snap-Fit Junction
ADC KRONE’s Snap-Fit junction is the industry’s first completely
tool-less junction. No additional tools are needed for installation
or removal. Quick and easy to install, the FiberGuide Snap-Fit
junction saves valuable time and money.
Express Exit™ Family
Express Exits™
The FiberGuide system features a number of innovative Express
Exit™ options: Low profile, 2-inch and 4-inch options round out
this product line, designed to meet your most demanding network
requirements. And now Plenum Express Exit systems are also
available. By simply securing an Express Exit to the sidewall of a
Plenum FiberGuide straight section, jumpers can be permanently
or temporarily routed to the Fibre Optic Terminal (FOT) equipment
or fibre frames. No cutting is required. Positioning a drop with a
member of the Express Exit family greatly simplifies installation,
protects the integrity of existing fibres and increases the overall
flexibility of the raceway system.
2x6 FiberGuide system
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
Snap-Fit™ and Hinged Cover Options
2x6 FiberGuide System
The 2x6 FiberGuide system provides another option to securely
route and protect patch cords. Designed for height-restricted
environments, this robust system provides the same support and
system flexibility of the traditional 4x6 system while saving 50mm
of overhead space. A complete set of fittings, straight
sections, junction and an Express Exit drop are available along
with adapters to both the 4x4 and 4x6 systems.
Cut-in T
Raceway Reconfiguration Solutions
ADC KRONE offers two products to facilitate easy on-site raceway
reconfigurations. Available for the 4x4, 4x6 and 4x12 systems, the
cut-in “T” and the expandable straight section offer the required
flexibility to optimise raceway systems in retrofit applications
without jeopardizing the integrity of existing cables.
www.adckrone.com
7.5
FiberGuide® Fibre Management System
System Description
FiberGuide® Materials Product Statement
Raw Material Meets
UL Requirement
Finished Product Meets
UL Requirement
FiberGuide Straight Sections
(All FiberGuide systems)
Flame rated: UL94V-0
UL94V-0 & UL2024
FiberGuide Molded Fittings
(All FiberGuide systems)
Flame rated: UL94V-0
UL94V-0 & UL2024
FiberGuide Flex Tube (2")
Flame rated: UL94V-0
UL2024
FiberGuide Flex Tube (1")
Flame rated: UL94V-0
UL2024
FiberGuide Flex Tube (7/8")
Flame rated: UL94V-2
UL2024
Note: FiberGuide flex tube complies with the National Electrical Code (NEC) Article
770-51 and Underwriters Laboratory UL2024 requirements for General Purpose
Fibre Optic Raceways.
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The FiberGuide fibre management system is a UL-listed (E151158) general purpose fibre optic raceway
system. All FiberGuide products are manufactured from flame-retardant materials. No FiberGuide system
parts contain PVC. The table summarises the fire-resistant properties of FiberGuide straight sections,
moulded parts and flex tube.
7.6
www.adckrone.com
FiberGuide® Fibre Management System
Patch Cord Densities
Recommended capacity takes into consideration random jumper placement into the FiberGuide® system.
Maximum density refers to the maximum number of fibre jumpers in a given cross-section of a
FiberGuide installation. The TracerLight™ Connector Identification system is ADC KRONE’s newest patch
cord solution. It features slightly different dimensions than standard patch cords.
2.0mm
Patch Cords
3.0mm
Patch Cords
120
90
40
4x6
2x6
4x4
4x12
2x2
FiberGuide System FiberGuide System FiberGuide System FiberGuide System FiberGuide System
Trough
Pileup
1.7 2.0
mm mm
3.0
mm
1.7
mm
2.0
mm
3.0
mm
1.7 2.0 3.0
mm mm mm
1.7
mm
2-inch
3-inch
4-inch
480 360
–
–
–
–
160
–
–
1440 1080 480
–
–
–
–
–
–
960 720 320
1440 1080 480
1920 1440 640
1440 1080 480
2160 1620 720
2880 2160 960
2.0 3.0
mm mm
1.7
mm
2.0 3.0
mm mm
2880 2160 960
4320 3240 1440
5760 4320 1920
Maximum Density
Maximum
Patch Cord
Density (per in2)
1.7mm
Patch Cords
2.0mm
Patch Cords
3.0mm
Patch Cords
142
102
44
2x2
4x4
4x6
4x12
2x6
FiberGuide System FiberGuide System FiberGuide System FiberGuide System FiberGuide System
Trough
Pileup
1.7 2.0 3.0
mm mm mm
1.7
mm
2-inch
3-inch
4-inch
568 408 176
–
–
–
–
–
–
1704 1224 528 1136 816 352 1704 1224 528 3408 2448 1056
1704 1224 528 2556 1836 792 5112 3672 1584
–
–
–
2272 1632 704 3408 2448 1056 6816 4896 2112
–
–
–
2.0
mm
3.0
mm
1.7
mm
2.0
mm
3.0
mm
1.7
mm
2.0 3.0
mm mm
1.7
mm
2.0 3.0
mm mm
TracerLight™ Patch Cords—65 Patch Cords per in2
Trough
2x6
2x2
4x4
4x6
4x12
Pileup FiberGuide System FiberGuide System FiberGuide System FiberGuide System FiberGuide System
2-inch
3-inch
4-inch
260
–
–
780
–
–
520
780
1040
www.adckrone.com
780
1170
1560
1560
2340
3120
7.7
Fibre Cable Raceway Systems
6356_au
•
7/06
1.7mm
Patch Cords
Recommended
Patch Cord
Density (per in2)
•
Fibre Connectivity Solutions
Recommended Density
Applications
Combining System Parts
Note: Junction kits are part of this assembly, but have been removed for clarity.
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
A combination of components from the various sized raceway systems typically comprise overhead
FiberGuide® installations. Adapters are used to make the transition between sizes. An example of an
overhead system that combines many of ADC KRONE’s FiberGuide systems can be seen below.
7.8
www.adckrone.com
Applications
Downspout Drop Options
2" Flex Tube Drop Option
Fibre Cable Raceway Systems
2"x 2" Rigid Drop Option
7/06
•
6356_au
•
Fibre Connectivity Solutions
The rigid 2-inch drop option and 2-inch flex tube option are two methods for directing fibres out of
overhead FiberGuide® downspouts and into optical equipment bays. The rigid system is recommended
because it offers excellent bend radius control and ensures a quality fibre backbone installation.
www.adckrone.com
7.9
Applications
Express Exit™ Drop Options
•
2"x 2" Rigid Drop Option
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The rigid 2-inch drop option and 2-inch flex tube drop option are two methods for delivering patch cords
out of overhead FiberGuide® straight sections and into optical equipment bays. The Express Exit™ allows a
vertical transition virtually anywhere along FiberGuide straight sections.
7.10
www.adckrone.com
2" Flex Tube Drop Option
Applications
Trumpet Flare Options
Horizontal T and Trumpet Flare
Downspout with Trumpet Flare
When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS-MJWR-A
junction must be used. This junction is only required to connect the vertical part; the FGS-MFAW-X
junction can be used to connect the horizontal parts.
7/06
•
Fibre Cable Raceway Systems
FGS-MFAW-X
6356_au
•
Fibre Connectivity Solutions
The trumpet flare is recommended at the bottom of a downspout when directing fibres into a fibre
distribution bay. Trumpet flares provide bend radius protection and allow for a large number of fibre
patch cords to transition into a fibre bay. A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts
and a 4x6 trumpet flare is used for the 4x12 downspout.
FGS-MJWR-A
Shown Assembled
www.adckrone.com
Exploded View
7.11
Applications with Raceway Reconfigurations
Cut-in T and Fitting
Fixture attached to sidewall of raceway
Fixture protects cables during cutting of sidewall
Fitting fills gap left by removed sidewall
Supplied hardware secures fitting to raceway
and completes installation
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The innovative cut-in T fitting and fixture enable on-site raceway modifications without jeopardising
the integrity of installed fibres. Available in 4, 6, and 12-inch widths, the cut-in T fitting can be
retrofitted to any installed 4, 6, and 12-inch straight section using the cut-in T fixture and the
hardware supplied with the fitting. No special tools are required.
7.12
www.adckrone.com
Applications with Raceway Reconfigurations
Expandable Straight Sections
Raceway system with gap between opposing runs
Expandable straight section extends to connect runs
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The FiberGuide® expandable straight section simplifies installation and enhances the overall flexibility
of the raceway system. The innovative straight section also provides an access point for future
reconfigurations. Available in 4, 6, and 12-inch widths, the expandable straight section reduces the
installation time necessary to connect opposing runs and provides continuous support for patch cords.
Completed installation
www.adckrone.com
7.13
Applications
4x12 Island T
4x12 Island T shown installed over an FOT storage bay
ADC KRONE also offers a 12-inch island T with recessed spool. Designed to be used over the NGF or
FOT storage bay, it is used in applications where the drop is positioned high above the frame and protection is required for exiting cables. The part is shipped as a T with a factory-installed, recessed
spool. A junction and fitting can then be attached to manage the exiting cables.
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The 4x12 Island T is designed to be used over the ADC KRONE Next Generation Frame (NGF) or a FOT
storage bay. The 4x12 Island T, a horizontal T with spool and factory-installed trumpet flare, channels
fibre directly into the vertical cableways below.
7.14
www.adckrone.com
Applications
Supporting Overhead Systems
A variety of support kits are available for each FiberGuide® system. Whenever possible, FiberGuide
support kits should be attached to existing hardware (cable racks, digital cableways, existing threaded
rods or equipment racks).
4x12 System
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x6, 4x4, 4x6 Systems
www.adckrone.com
7.15
Applications
The straight sections on the 4x12 FiberGuide® system are exceptionally strong, making frequent
placement of supports beneath them unnecessary. Whenever possible the supports on the 4x12
system should be placed under the fittings using the mounting bosses as shown (photos 1 and 2).
This placement provides the strongest system and requires the least amount of support hardware to
be used. Occasionally it is not possible to attach the support bracket to the mounting bosses on the
fittings; in those instances the variable fitting support locator can be installed on the bottom of the
fitting, allowing the support to be attached anywhere along the fitting bottom (photos 3, 4 and 5).
When combining several 4x12 straight sections, it is recommended that support brackets are
installed on both sides of each junction.
Typical 4x12 system installation over a Next Generation Frame Line-up
2
1
3
4
5
•
Variable Fitting Support Locator
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Supporting 4x12 Systems
7.16
Note: see page 7.36 for 4x12 system fittings.
www.adckrone.com
2x2 System Fittings
2"H x 2"W
Yellow System
Catalogue Number
FGS-MHTA-C
Orange System
Catalogue Number
FGSO-MHTA-C
Number of
Junctions
3
FGS-MHXP-C
FGSO-MHXP-C
2+2
FGS-MH4A-C
FGSO-MH4A-C
2
FGS-MH9A-C
FGSO-MH9A-C
2
FGS-MH9A-C-45/2
FGSO-MH9A-C-45/2
2
FGS-MU4A-C
FGSO-MU4A-C
2
FGS-MU9A-C
FGSO-MU9A-C
2
FGS-MD4A-C
FGSO-MD4A-C
2
FGS-MD9A-C
FGSO-MD9A-C
2
FGS-MDSA-AC
FGSO-MDSA-AC
FGS-HMEC-C
FGSO-HMEC-C
(1) 2x2, (1) 4x4
––
2x2 Horizontal T
FGS-MHTA-C
2x2 Horizontal Cross
FGS-MHXP-C
2x2 45°
Horizontal Elbow
FGS-MH4A-C
2x2 90°
Horizontal Elbow
FGS-MH9A-C
2x2 90° Extended
Horizontal Elbow
FGS-MH9A-C-45/2
2x2 45° Up Elbow
FGS-MU4A-C
2x2 45° Down Elbow
FGS-MD4A-C
2x2 to 4x4
Straight Adapter
FGS-MDSA-AC
2x2 End Cap
FGS-HMEC-C
www.adckrone.com
7.17
Fibre Cable Raceway Systems
Description
2x2 horizontal T
cover included
2x2 horizontal cross
cover included—two 2x2
junctions included; two
additional 2x2 junctions
required
2x2 45° horizontal elbow
cover included
2x2 90° horizontal elbow
cover included
2x2 90° extended horizontal elbow
cover included;
similar to two 45° horizontal
elbows joined
2x2 45° up elbow
cover included
2x2 90° up elbow
cover included
2x2 45° down elbow
cover included
2x2 90° down elbow
cover included
2x2 to 4x4 straight adapter
cover included
2x2 end cap
includes 2x2 junction
7/06
•
6356_au
•
Fibre Connectivity Solutions
Ordering Information
2x2 System Downspouts and Attachments
2"H x 2"W
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
Number of
Junctions
2x2 standard downspout
cover included
FGS-MSDS-C
FGSO-MSDS-C
2
2x2 extended downspout
cover included
FGS-MDSP-C
FGSO-MDSP-C
1
2x2 extended downspout, kit with 2"
flex tube
cover included, with 2" flex tube, 610mm long
FGS-KDH2-C
FGSO-KDH2-C
1
2x2 trumpet flare—includes 2x2 junction
FGS-MTRM-C
FGSO-MTRM-C
–
Flex tube clamp kit of 10
attaches 7/8" flex tube to rack
FGS-HSHC-10
FGS-HSHC-10
–
2x2 flex tube attachment
includes 2" flex tube and a 2x2 junction
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-MEX1-C-5F
FGS-MEX1-C-10F
FGS-MEX1-C-15F
FGSO-MEX1-C-5F
FGSO-MEX1-C-10F
FGSO-MEX1-C-15F
–
–
–
Dual 7/8" flex tube attachment
includes two lengths of 7/8" flex tube and a
2x2 junction
(2) 1.52m length (5')
(2) 3.05m length (10')
(2) 4.57m length(15')
FGS-KT03-C
FGS-KT03-C-10F
FGS-KT03-C-15F
FGSO-KT03-C
FGSO-KT03-C-10F
FGSO-KT03-C-15F
–
–
–
2x2 Extended Downspout
FGS-MDSP-C
FGS-KDH2-C
Shown Attached to
2x2 FiberGuide system
Dual 7/8" Flex Tube
Attachment
FGS-KT03-C
FGS-KT03-C Shown
Attached to Downspout
2x2 Trumpet Flare
FGS-MTRM-C
•
7/06
Fibre Cable Raceway Systems
2x2 Standard Downspout
FGS-MSDS-C
6356_au
•
Fibre Connectivity Solutions
Description
7.18
www.adckrone.com
2x2 System Straight Section and Junction
2"H x 2"W
Straight Section
Ordering Information
Orange System
Yellow System
Catalogue Number Catalogue Number
Description
2x2 horizontal
straight section
1.83m long (6'), cover included
FGS-MSHA-C
2x2 Horizontal Straight Section
FGS-MSHA-C
FGSO-MSHA-C
Junction
The 2x2 junction is used for mechanically joining FiberGuide® sections.
No tools are required for assembly.
Ordering Information
Description
2x2 junction
Yellow System
Orange System
Catalogue Number Catalogue Number
FGS-MJWR-C
FGSO-MJWR-C
2x2 Junction
FGS-MJWR-C
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The 2x2 straight section is a U-shaped trough that provides a
protective raceway for optical fibres. Available in 1.83m (6') lengths,
the straight section carries fibres horizontally throughout the system.
It can also be installed vertically when routing around obstructions.
A warning label is included with each junction kit.
www.adckrone.com
7.19
2x6 System Fittings and Downspouts
2"H x 6"W
Ordering Information
Yellow System
Catalogue Number
FGS-MDSP-G
2
2x6 horizontal T
FGS-MHRT-G
3
2x6 horizontal cross
FGS-MHXP-G
4
2x6 90° horizontal elbow
FGS-MH9E-G
2
2x6 90° down elbow
FGS-MD9E-G
2
2x6 45° horizontal elbow
FGS-MH4E-G
2
2x6 45° up elbow, metal cover included
FGS-MU4E-G
2
2x6 45° down elbow
FGS-MD4E-G
2
2x6 to 4x4 adapter
FGS-MDSA-GA
(1) 2x6, (1) 4x4
2x6 to 4x6 adapter
FGS-MDSA-GB
(1) 2x6, (1) 4x4
2x6 trumpet flare
FGS-MTRM-G
–
2x6 end cap
FGS-HMEC-G
–
2x6 dual 2" flex tube attachment
FGS-KT03-G-5F
–
6356_au
•
7/06
Fibre Cable Raceway Systems
7.20
Number of
Junctions
2x6 to 2x2 downspout
•
Fibre Connectivity Solutions
Description
www.adckrone.com
2x6 System Fittings and Downspouts
2x6 to 2x2 Downspout
FGS-MDSP-G
2x6 Horizontal T
FGS-MHRT-G
2x6 Horizontal Cross
FGS-MHXP-G
2x6 90° Horizontal Elbow
FGS-MH9E-G
2x6 90° Down Elbow
FGS-MD9E-G
2x6 45° Horizontal Elbow
FGS-MH4E-G
2x6 45° Up Elbow
FGS-MU4E-G
Metal cover included
2x6 45° Down Elbow
FGS-MD4E-G
2x6 to 4x4 Adapter
FGS-MDSA-GA
2x6 to 4x6 Adapter
FGS-MDSA-GB
2x6 Trumpet Flare
FGS-MTRM-G
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
2"H x 6"W
www.adckrone.com
7.21
2x6 System Straight Section
2"H x 6"W
The unique four-channel design of the 2x6 FiberGuide® straight
section allows the standard system to be attached to the support
structure without the need to cut or drill any holes within the
trough. This ensures that the patch cords will not come in contact
with any screw heads or bolts.
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
7.22
2x6 Straight Section
FGS-MSHS-G
Yellow System
Catalogue Number
Description
2x6 horizontal straight section, 1.83m (6')
FGS-MSHS-G
New 2x6 hinged cover kit for
horizontal straight section
includes three mounting hinges and three clips
FGS-MSNC-B/G
6-inch snap-on cover kit for
horizontal straight section
includes six capture clips with mounting clasps
FGS-MSSC-B/G
Kit-10 black capture clips*
FGS-DHCP
NEW Hinged Cover Kit for
Horizontal Straight Section
FGS-MSNC-B/G
*See drawings on page 7.57 for more detail on how capture clips and
hinges are used
6-inch snap-on cover
FGS-MSSC-B/G
Express Exit™
Designed for low-ceiling or height-restricted environments, the
Express Exit™ for the 2x6 FiberGuide® system extends only 50.8mm
above the straight section sidewall. The Express Exit accommodates
up to 150 (3mm) patch cords, includes removable rear cable guides
for additional cable management, and features a 2x2 exit opening.
It is designed specifically for the 2x6 FiberGuide system and should
not be used on any other FiberGuide system.
Express Exit™ 2x6
FGS-MEXP-LP-G
Ordering Information
Yellow System
Catalogue Number
Description
Express Exit™ for 2x6 system
includes base, cover, mounting hardware, and support bracket
www.adckrone.com
FGS-MEXP-LP-G
2x6 System Junction
2"H x 6"W
The one-piece junction employs factory-installed setscrews to assure
strength and durability. No cutting or drilling of the components
is required for assembly. A warning label is included with each
junction kit.
Description
Yellow System
Catalogue Number
2x6 junction
FGS-JUNC-G
2x6 Junction
FGS-JUNC-G
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
www.adckrone.com
7.23
4x4 System Fittings
4"H x 4"W
Ordering Information
Orange System Fixed
Orange System Snap-on Cover Metal Cover
Catalogue No.
Catalogue No.
Catalogue No.
FGS-MHRT-A
FGS-SHRT-A
FGSO-MHRT-A
FGSO-SHRT-A
FGS-CHRT-A
3
4x4 horizontal cross
FGS-MHXP-A
FGS-SHXP-A
FGSO-MHXP-A
FGSO-SHXP-A
FGS-CHXP-A
4
4x4 90° horizontal elbow FGS-MH9E-A
FGS-SH9E-A
FGSO-MH9E-A
FGSO-SH9E-A
FGS-CH9E-A
4x4 90° up elbow
metal cover included
FGS-MU9E-A
FGS-SU9E-A
FGSO-MU9E-A
FGSO-SU9E-A
4x4 90° down elbow
FGS-MD9E-A
FGS-SD9E-A
FGSO-MD9E-A
FGSO-SD9E-A
FGS-CD9E-A
FGS-MH4E-A
FGS-SH4E-A
FGSO-MH4E-A
FGSO-SH4E-A
FGS-CH4E-A
4x4 45° up elbow
metal cover included
FGS-MU4E-A
FGS-SU4E-A
FGSO-MU4E-A
FGSO-SU4E-A
4x4 45° down elbow
FGS-MD4E-A
FGS-SD4E-A
FGSO-MD4E-A
FGSO-SD4E-A
FGS-CD4E-A
4x4 to 4x6 straight
adapter
FGS-MDSA-AB
FGS-SDSA-AB
FGSO-MDSA-AB
FGSO-SDSA-AB
FGS-CDSA-AB
4x4 expandable
straight section
FGS-MVAR-A
FGSO-MVAR-A
4x4 cut-in T
assembly hardware
included
FGS-MHIS-A
FGSO-MHIS-A
Cut-in T fixture
4x4 end cap
FGS-MHIS-JIG-A/B/F
FGS-HMEC-A
FGS-MHIS-JIG-A/B/F
FGS-HMEC-A
6356_au
•
www.adckrone.com
2
2
4x4 45° horizontal elbow
7/06
Fibre Cable Raceway Systems
7.24
Number of
Junctions
4x4 horizontal T
•
Fibre Connectivity Solutions
Description
Yellow System
Yellow System Snap-on Cover
Catalogue No.
Catalogue No.
2
2
2
2
(1) 4x4,
(1) 4x6
2
4x4 System Fittings
4x4 Horizontal T
FGS-MHRT-A
4x4 Horizontal Cross
FGS-MHXP-A
4x4 90° Horizontal Elbow
FGS-MH9E-A
4x4 90° Up Elbow
FGS-MU9E-A
Metal cover included
4x4 90° Down Elbow
FGS-MD9E-A
4x4 45° Horizontal Elbow
FGS-MH4E-A
4x4 45° Up Elbow
FGS-MU4E-A
Metal cover included
4x4 45° Down Elbow
FGS-MD4E-A
4x4 to 4x6 Straight Adapter
FGS-MDSA-AB
4x4 Expandable Straight Section
FGS-MVAR-A
4x4 Cut-in T
FGS-MHIS-A
Cut-in T Fixture
FGS-MHIS-JIG-A/B/F
(Shown on straight section)
4x4 End Cap
FGS-HMEC-A
Snap-on Plastic Cover
(Shown attached to 45° horizontal
elbow with junctions)
FGS-SH4E-A
www.adckrone.com
7.25
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
4"H x 4"W
4x4 System Downspouts and Attachments
An array of 4x4 downspout options are available to feed fibre from overhead straight sections
into fibre optic equipment below.
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
7.26
Description
Yellow System
Orange System
Catalogue Number Catalogue Number
4x4 downspout
FGS-MDSP-A
Cover for 4x4 downspout
FGS-MCDS-AB
FGSO-MCDS-AB
–
4x4 extended downspout
FGS-MDSP-EX-A
FGSO-MDSP-EX-A
2
Cover for 4x4 extended downspout
FGS-MCDS-EX-AB
FGSO-MCDS-EX-AB
–
4x4 insertable downspout
FGS-MDSP-A/I
FGSO-MDSP-A/I
–
4x4 trumpet flare used on both
4x4 and 4x6 downspouts—
no 4" junction kit required
FGS-MTRM-A
FGSO-MTRM-A
–
4x4 downspout exit junction kit
FGS-MJWR-A
FGSO-MJWR-A
–
4x4/4x6 downspout insert
converts bottom of downspout to
2"x 2" without using 2" to 4"
adapter, saving vertical space
FGS-HDSI-AB
FGS-HDSI-AB
–
4" square to 2" round adapter with
flex tube—one 4x4 junction kit
(FGS-MJWR-A) required to attach
to a downspout drop
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-ASRI-5F
FGS-ASRI-10F
FGS-ASRI-15F
FGSO-ASRI-5F
FGSO-ASRI-10F
FGSO-ASRI-15F
1
1
1
4x4 dual 2" flex tube attachment
no 4x4 junction kit required
(2) 1.52m length (5')
(2) 3.05m length (10')
(2) 4.57m length (15')
FGS-KT03-A
FGS-KT03-A10F
FGS-KT03-A15F
FGSO-KT03-A
FGSO-KT03-A10F
FGSO-KT03-A15F
–
–
–
4x4 single 2" flex tube attachment
no 4x4 junction kit required
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-KT03-A1
FGS-KT03-A1-10F
FGS-KT03-A1-15F
FGSO-KT03-A1
FGSO-KT03-A1-10F
FGSO-KT03-A1-15F
–
–
–
4x4 quad 2" flex tube attachment
no 4x4 junction kit required
(4) 1.52m length (5')
(4) 3.05m length (10')
(4) 4.57m length (15')
FGS-KT03-A4-5F
FGS-KT03-A4-10F
FGS-KT03-A4-15F
FGSO-KT03-A4-5F
FGSO-KT03-A4-10F
FGSO-KT03-A4-15F
–
–
–
4x4 quad 7/8" flex tube attachment
no 4x4 junction kit required
(4) 1.52m length (5')
(4) 3.05m length (10')
(4) 4.57m length (15')
FGS-KT07-A4-5F
FGS-KT07-A4-10F
FGS-KT07-A4-15F
FGSO-KT07-A4-5F
FGSO-KT07-A4-10F
FGSO-KT07-A4-15F
–
–
–
FGSO-MDSP-A
Number of
Junctions
2*
*A third junction is needed if drop is to a fitting or straight section. This drop junction must be a
junction type FGS-MJWR-A.
www.adckrone.com
4x4 Downspout
FGS-MDSP-A
Cover for 4x4 Downspout
FGS-MCDS-AB
4x4 Extended Downspout
FGS-MDSP-EX-A
(Shown with and without cover)
4x4 Insertable Downspout
FGS-MDSP-A/I
4x4 Trumpet Flare
FGS-MTRM-A
4x4 Downspout Exit
Junction Kit
FGS-MJWR-A
4x4/4x6 Downspout Insert
FGS-HDSI-AB
4" Square to 2" Round
Adapter with Flex Tube
FGS-ASRI
Requires FGS-MJWR-A
Junction Kit
4x4 Dual 2"
Flex Tube Attachment
FGS-KT03-A
Fibre Cable Raceway Systems
4x4 Single 2"
Flex Tube Attachment
FGS-KT03-A1
2" Quad Flex
Tube Attachment
FGS-KT03-A4
7/06
•
6356_au
•
Fibre Connectivity Solutions
4x4 System Downspouts and Attachments
www.adckrone.com
7.27
4x4 System Straight Section
4"H x 4"W
The unique four-channel design of the 4x4 FiberGuide® straight section allows the standard system to
be attached to the support structure without the need to cut or drill any holes within the trough. This
ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x4 systems where higher cable counts apply increased pressure on patch cords at the
bottom of the trough.
Yellow System
Orange System
Catalogue Number Catalogue Number
Description
4x4 horizontal straight section
1.83m (6') long
FGS-MSHS-A
FGSO-MSHS-A
4x4 expandable straight section
FGS-MVAR-A
FGSO-MVAR-A
NEW 4x4 hinged cover kit for horizontal straight
section—includes three mounting hinges and
three clips
FGS-MSNC-A
FGSO-MSNC-A
4x4 snap-on cover kit for horizontal straight section—
includes six capture clips with mounting clasps
FGS-MSSC-A
FGSO-MSSC-A
Vertical spring hinges, kit of 3
FGS-HVHG
FGS-HVHG
Kit—10 black capture clips*
FGS-DHCP
FGS-DHCP
Kit—10 black capture clips and 10 hinges*
FGS-DHHC
(Yellow Hinge)
FGSO-DHHC
(Yellow Hinge)
*See drawings on page 7.60 for more detail on how capture clips and hinges are used.
4x4 Horizontal
Straight Section
FGS-MSHS-A
4x4 Expandable
Straight Section
FGS-MVAR-A
NEW 4x4 Hinged Cover for
Horizontal Straight Section
FGS-MSNC-A
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
7.28
www.adckrone.com
4x4 Snap-On
Cover for Horizontal
Straight Section
FGS-MSSC-A
4x4 Snap-Fit Junction
4"H x 4"W
The Snap-Fit junction assembly is available for the 4-inch FiberGuide®
system. The Snap-Fit junction is a completely tool-less junction. No
additional tools are required for installation or removal. The junction
exhibits superior holding force and accommodates support brackets.
A warning label is included with each junction kit.
Description
4x4 Snap-Fit junction
Yellow System
Orange System
Catalogue Number Catalogue Number
FGS-MFAW-A
4x4 Snap-Fit Junction
FGS-MFAW-A
FGSO-MFAW-A
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
www.adckrone.com
7.29
4x6 System Fittings
4"H x 6"W
Description
Yellow System
Catalogue No.
Yellow System
Snap-on Cover
Catalogue No.
Orange System
Orange System Snap-on Cover
Catalogue No. Catalogue No.
4x6 horizontal T
FGS-MHRT-B
FGS-SHRT-B
FGSO-MHRT-B
FGSO-SHRT-B
FGS-CHRT-B
3
4x6 horizontal
cross
FGS-MHXP-B
FGS-SHXP-B
FGSO-MHXP-B
FGSO-SHXP-B
FGS-CHXP-B
4
4x6 90°
horizontal
elbow
FGS-MH9E-B
FGS-SH9E-B
FGSO-MH9E-B
FGSO-SH9E-B
FGS-CH9E-B
2
4x6 90° up
FGS-MU9E-B
elbow
metal cover included
Number of
Junctions
2
4x6 90° down
elbow
FGS-MD9E-B
FGS-SD9E-B
FGSO-MD9E-B
FGSO-SD9E-B
FGS-CD9E-B
2
4x6 45°
horizontal
elbow
FGS-MH4E-B
FGS-SH4E-B
FGSO-MH4E-B
FGSO-SH4E-B
FGS-CH4E-B
2
4x6 45° up
FGS-MU4E-B
elbow
metal cover included
FGS-SU4E-B
FGSO-MU4E-B
FGSO-SU4E-B
4x6 45° down
elbow
FGS-MD4E-B
FGS-SD4E-B
FGSO-MD4E-B
FGSO-SD4E-B
4x4 to 4x6
straight adapter
FGS-MDSA-AB
FGS-SDSA-AB
FGSO-MDSA-AB FGSO-SDSA-AB FGS-CDSA-AB
4x12 to single
4x6 adapter
FGS-MDSA-FB
FGS-SDSA-FB
FGSO-MDSA-FB FGSO-SDSA-FB
4x6 expandable
straight section
FGS-MVAR-B
FGSO-MVAR-B
4x6 cut-in T
assembly hardware
included
FGS-MHIS-B
FGSO-MHIS-B
Cut-in T fixture
FGS-MHIS-JIG-A/B/F
4x6 end cap
FGS-HMEC-B
FGS-HMEC-B
6356_au
•
www.adckrone.com
2
FGS-CD4E-B
2
(1) 4x4,
(1) 4x6
2
FGS-MHIS-JIG-A/B/F
7/06
Fibre Cable Raceway Systems
7.30
Fixed
Metal Cover
Catalogue No.
FGSO-MU9E-B
•
Fibre Connectivity Solutions
Ordering Information
4x6 System Fittings
4x6 Horizontal T
FGS-MHRT-B
4x6 Horizontal Cross
FGS-MHXP-B
4x6 90° Horizontal Elbow
FGS-MH9E-B
4x6 90° Up Elbow
FGS-MU9E-B
Cover included
4x6 90° Down Elbow
FGS-MD9E-B
4x6 45° Horizontal Elbow
FGS-MH4E-B
4x6 45° Up Elbow
FGS-MU4E-B
Cover included
4x6 45° Down Elbow
FGS-MD4E-B
4x4 to 4x6 Straight Adapter
FGS-MDSA-AB
4x6 Expandable
Straight Section
FGS-MVAR-B
4x6 Cut-in T
FGS-MHIS-B
Cut-in T Fixture
FGS-MHIS-JIG-A/B/F
(Shown on a straight section)
4x12 to Single 4x6 Adapter
FGS-MDSA-FB
Cover: FGS-SDSA-FB
4x6 End Cap
FGS-HMEC-B
Snap-on Plastic Cover
(Shown attached to 45° horizontal
elbow with junctions)
FGS-SH4E-B
www.adckrone.com
7.31
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
4"H x 6"W
4x6 System Downspouts and Attachments
An array of 4x6 downspouts and attachments are available to feed fibre from overhead straight
sections into fibre optic equipment below. All 4x6 downspouts feature 101.6mm (4") exits and attach
to the 101.6mm (4") exit attachments listed below.
Ordering Information
Number of
Yellow System
Orange System
Catalogue Number Catalogue Number junction kits
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Description
4x6 downspout
Note: If a trumpet flare is required use a
4x4 flare (FGS-MTRM-A or FGSO-MTRM-A)
FGS-MDSP-B
FGSO-MDSP-B
2*
Cover for 4x6 downspout and dual downspout
FGS-MCDS-AB**
FGSO-MCDS-AB**
–
4x6 extended downspout
FGS-MDSP-EX-B
FGSO-MDSP-EX-B
2
Cover for 4x6 extended downspout
FGS-MCDS-EX-AB
FGSO-MCDS-EX-AB
–
4x6 insertable downspout
FGS-MDSP-B/I
FGSO-MDSP-B/I
–
4x6 dual drop downspout
FGS-MDSP-2B
FGSO-MDSP-2B
2*
Trumpet flare for dual drop downspout (kit of 2)
FGS-MTRM-2B
FGSO-MTRM-2B
–
4x6 dual drop downspout with divider
FGS-MDSP-2B-IMP
FGSO-MDSP-2B-IMP
2
Trumpet flare for dual drop downspout
with divider (kit of 2)
FGS-MTRM-2B-IMP
FGSO-MTRM-2B-IMP
–
4x4 downspout exit junction
FGS-MJWR-A
FGSO-MJWR-A
–
4x4/4x6 downspout insert—converts bottom
of downspout to 2"x 2" without using
2" to 4" adapter, saving vertical space
FGS-HDSI-AB
FGS-HDSI-AB
–
4x4 trumpet flare used on both 4x4 and 4x6
downspouts—no 4" junction kit required
FGS-MTRM-A
FGSO-MTRM-A
–
4x4 square to 2" round adapter with flex tube—
one 4x4 junction kit (FGS-MJWR-A)
required to attach to a downspout drop
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-ASRI-5F
FGS-ASRI-10F
FGS-ASRI-15F
FGSO-ASRI-5F
FGSO-ASRI-10F
FGSO-ASRI-15F
1
1
1
4x4 dual 2" flex tube attachment
no 4x4 junction kit required
(2) 1.52m length (5')
(2) 3.05m length (10')
(2) 4.57m length (15')
FGS-KT03-A
FGS-KT03-A10F
FGS-KT03-A15F
FGSO-KT03-A
FGSO-KT03-A10F
FGSO-KT03-A15F
–
–
–
4x4 single 2" flex tube attachment
no 4x4 junction kit required
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-KT03-A1
FGS-KT03-A1-10F
FGS-KT03-A1-15F
FGSO-KT03-A1
FGSO-KT03-A1-10F
FGSO-KT03-A1-15F
–
–
–
4x4 quad 2" flex tube attachment
no 4x4 junction kit required
(4) 1.52m length (5')
(4) 3.05m length (10')
(4) 4.57m length (15')
FGS-KT03-A4-5F
FGS-KT03-A4-10F
FGS-KT03-A4-15F
FGSO-KT03-A4-5F
FGSO-KT03-A4-10F
FGSO-KT03-A4-15F
–
–
–
4x4 quad 7/8" flex tube attachment
no 4x4 junction kit required
(4) 1.52m length (5')
(4) 3.05m length (10')
(4) 4.57m length (15')
FGS-KT07-A4-5F
FGS-KT07-A4-10F
FGS-KT07-A4-15F
FGSO-KT07-A4-5F
FGSO-KT07-A4-10F
FGSO-KT07-A4-15F
–
–
–
*A 4x4 junction is needed to drop to a fitting or a straight section. This drop junction must be a junction
type FGS-MJWR-A.
**Dual downspout requires two covers.
7.32
www.adckrone.com
4x6 Downspout
FGS-MDSP-B
Cover for 4x6 Downspout
FGS-MCDS-AB
4x6 Extended Downspout
FGS-MDSP-EX-B
(Shown with and
without cover)
4x6 Insertable Downspout
FGS-MDSP-B/I
4x6 Dual Downspout
FGS-MDSP-2B
4x6 Dual Downspout
with Divider
FGS-MDSP-2B-IMP
Trumpet Flare Kit for 4x6
Dual Downspout
FGS-MTRM-2B
Trumpet Flare Kit for Dual
Downspout with Divider
FGS-MTRM-2B-IMP
4x4 Single 2"
Flex Tube Attachment
FGS-KT03-A1
4x4 Trumpet Flare Kit
FGS-MTRM-A
4x4/4x6 Downspout Insert
FGS-HDSI-AB
Downspout Exit Junction Kit
FGS-MJWR-A
4" Square to 2" Round
Adapter with Flex Tube
FGS-ASRI
Requires FGS-MJWR-A
Junction Kit
4x4 Dual 2"
Flex Tube Attachment
FGS-KT03-A
2" Quad Flex
Flex Tube Attachment
FGS-KT03-A4
www.adckrone.com
7.33
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
4x6 System Downspouts and Attachments
4x6 System Straight Section and Junction
4"H x 6"W
The unique four-channel design of the 4x6 FiberGuide® straight sections allows the standard system
to be attached to the support structure without the need to cut or drill any holes within the trough.
This ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x6 systems where higher cable counts apply increased pressure on patch cords at the
bottom of the trough.
Ordering Information
Yellow System
Catalogue Number
Description
FGS-MSHS-B
FGSO-MSHS-B
4x6 expandable straight section
FGS-MVAR-B
FGSO-MVAR-B
4x6 slack storage straight section
FGS-MSHS-STOR-B
FGSO-MSHS-STOR-B
NEW 4x6 hinged cover kit for horizontal straight
section—includes three mounting hinges
and three clips
FGS-MSNC-B/G
FGSO-MSNC-B/G
6" snap-on cover kit for horizontal straight section—
includes six quick knobs with mounting clasps
FGS-MSSC-B/G
FGSO-MSSC-B/G
Vertical spring hinges, kit of 3
FGS-HVHG
FGS-HVHG
Kit-10 black capture clips
FGS-DHCP
FGS-DHCP
Kit-10 black capture clips and 10 hinges
FGS-DHHC
(yellow hinge)
FGSO-DHHC
(orange hinge)
*See drawings on page 7.61 for more detail on how capture clips and hinges are used.
4x6 Horizontal
Straight Section
FGS-MSHS-B
4x6 Expandable
Straight Section
FGS-MVAR-B
NEW Hinged Cover
Kit for Horizontal
Straight Section
FGS-MSNC-B/G
•
7.34
Orange System
Catalogue Number
4x6 horizontal straight section, 1.82m (6') long
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Straight Section
www.adckrone.com
6" Snap-on Cover
for Horizontal
Straight Section
FGS-MSSC-B/G
4x6 Snap-Fit™ Junction
4"H x 6"W
The Snap-Fit junction assembly is available for the 6-inch FiberGuide®
system. The new junction is a completely tool-less junction. No additional
tools are required for installation or removal. The Snap-Fit junction
exhibits superior holding force and accommodates support brackets.
A warning label is included with each junction kit.
Description
4x6 Snap-Fit junction
Yellow System
Orange System
Catalogue Number Catalogue Number
FGS-MFAW-B
4x6 Snap-Fit Junction
FGS-MFAW-B
FGSO-MFAW-B
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
www.adckrone.com
7.35
4x12 System Fittings
4"H x 12"W
Ordering Information
Description
FGS-MHRT-F
Yellow System
Snap-on Cover
Catalogue No.
FGS-SHRT-F
Orange System
Snap-on Cover
Catalogue Sys.
Number of
Junctions
FGSO-MHRT-F
FGSO-SHRT-F
3
Orange System
Catalogue No.
4x12 horizontal cross
FGS-MHXP-F
FGS-SHXP-F
FGSO-MHXP-F
FGSO-SHXP-F
4
4x12 90° horizontal
elbow
FGS-MH9E-F
FGS-SH9E-F
FGSO-MH9E-F
FGSO-SH9E-F
2
4x12 90° down elbow
FGS-MD9E-F
FGS-SD9E-F
FGSO-MD9E-F
FGSO-SD9E-F
2
4x12 45° horizontal
elbow
FGS-MH4E-F
FGS-SH4E-F
FGSO-MH4E-F
FGSO-SH4E-F
2
4x12 45° up elbow
FGS-MU4E-F
FGS-SU4E-F
FGSO-MU4E-F
FGSO-SU4E-F
2
FGS-MD4E-F
FGS-SD4E-F
FGSO-MD4E-F
FGSO-SD4E-F
FGS-MHRT-F/B
FGS-SHRT-F/B
FGSO-MHRT-F/B
FGSO-SHRT-F/B
(2) 4x12,
(1)4x6
2
4x12 horizontal cross
with two 6" exits
FGS-MHXP-B/F
FGS-SHXP-B/F
FGSO-MHXP-B/F
FGSO-SHXP-B/F
(2) 4x12,
(2) 4x6
4x12 to dual 4x6
adapter
FGS-MDSA-F2B
FGS-SDSA-F2B
FGSO-MDSA-F2B
FGSO-SDSA-F2B
(1) 4x12,
(2) 4x6
4x12 to single 4x6
adapter
FGS-MDSA-FB
FGS-SDSA-FB
FGSO-MDSA-F
FGSO-SDSA-FB
(1) 4x12,
(1) 4x6
4x12 to 4x6 right
adapter
includes fastening hardware
FGS-MDSA-FB-R
FGS-MDSA-FB-R
–
Fixed metal cover for
right adapter
FGS-VDSA-FB-R
FGS-VDSA-FB-R
–
4x12 to 4x6 left adapter
includes fastening hardware
FGS-MDSA-FB-L
FGS-MDSA-FB-L
–
Fixed metal cover for
left adapter
FGS-VDSA-FB-L
FGS-VDSA-FB-L
–
4x12 end cap
FGS-HMEC-F
FGS-HMEC-F
–
4x12 expandable
straight section
FGS-MVAR-F
FGSO-MVAR-F
2
FGS-MHIS-F
FGSO-MHIS-F
–
Cut-in T fixture
FGS-MHIS-JIG-A/B/F
FGS-MHIS-JIG-A/B/F
–
Variable support locator kits
Each kit contains all
necessary mounting
hardware.
Fitting sold separately
Kit for:
FGS-MDSP-F
FGS-MHRT-F
FGS-MHXP-F
FGS-MH9E-F
FGS-MHRT-F/B
FGS-MHXP-B/F
FGS-MDSP-F-VS
FGS-MHRT-F-VS
FGS-MHXP-F-VS
FGS-MH9E-F-VS
FGS-MHRT-F/B-VS
FGS-MHXP-B/F-VS
FGS-MDSP-F-VS
FGS-MHRT-F-VS
FGS-MHXP-F-VS
FGS-MH9E-F-VS
FGS-MHRT-F/B-VS
FGS-MHXP-B/F-VS
•
4x12 cut-in T
7/06
Fibre Cable Raceway Systems
•
4x12 45° down elbow
4x12 horizontal T
with single 6" exit
6356_au
Fibre Connectivity Solutions
4x12 horizontal T
Yellow System
Catalogue No.
Snap-on cover installation
7.36
www.adckrone.com
4x12 System Fittings
4x12 Horizontal T
FGS-MHRT-F
4x12 Horizontal Cross
FGS-MHXP-F
4x12 90° Horizontal Elbow
FGS-MH9E-F
4x12 90° Down Elbow
FGS-MD9E-F
4x12 45° Horizontal Elbow
FGS-MH4E-F
4x12 45° Up Elbow
FGS-MU4E-F
4x12 45° Down Elbow
FGS-MD4E-F
4x12 Horizontal T with
Single 6" Exit
FGS-MHRT-F/B
4x12 Horizontal Cross
with Two 6" Exits
FGS-MHXP-B/F
4x12 to Dual 4x6 Adapter
FGS-MDSA-F2B
4x12 to Single 4x6
Adapter
FGS-MDSA-FB
4x12 to 4x6
Adapter—Right
FGS-MDSA-FB-R
4x12 to 4x6 Adapter—Left
FGS-MDSA-FB-L
4x12 End Cap
FGS-HMEC-F
4x12 Expandable
Straight Section
FGS-MVAR-F
4x12 Cut-in T
FGS-MHIS-F
Cut-in T Fixture
FGS-MHIS-JIG-A/B/F
(Shown on a
straight section)
www.adckrone.com
7.37
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
4"H x 12"W
4x12 System Downspouts and Attachments
An array of 4x12 downspouts and attachments are available to feed fibre from overhead straight
sections into fibre optic equipment below. The 4x12 downspout features a 4x6 exit and accepts the
4x6 exit attachments listed below.
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
FGS-MDSP-F
FGSO-MDSP-F
4X12 Insertable downspout
FGS-MDSP-F/I
FGSO-MDSP-F/I
Cover for 4x12 downspout
FGS-SDSP-F
FGSO-SDSP-F
4x12 trumpet flare
FGS-MTRM-F
FGSO-MTRM-F
4x12 downspout with rear T
FGS-MDRT-F
FGSO-MDRT-F
3*
4x12 Island T with spool and factory
installed trumpet flare designed for use over
ADC KRONE Next Generation Frame Storage Bay
FGS-ISLAND-F
FGSO-ISLAND-F
2
4x12 Island T with trumpet and dividing spool—
designed for use over ADC KRONE 600mm
wide Next Generation Frame—Variable Support
Locator Kit included
FGS-ISLAND-F-513
FGSO-ISLAND-F-513
2
4x12 Island T with recessed dividing spool
FGS-ISLAND3-F
FGSO-ISLAND3-F
3
4x6 dual 2" flex tube attachment
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-KT03-B
FGS-KT03-B-10F
FGS-KT03-B-15F
FGSO-KT03-B
FGSO-KT03-B-10F
FGSO-KT03-B-15F
4x6 trumpet flare kit
used on 4x12 downspouts
FGS-MTRM-B
FGSO-MTRM-B
4x12 to 4x4 downspout converter
converts downspout opening
to accept 4x4 slotted duct
FGS-HDSI-F/D
FGS-HDSI-F/D
4x12 to 2x2 downspout converter
FGS-HDSI-F/C
FGS-HDSI-F/C
*An additional junction is needed if drop is to fitting or straight section. This 4x6 junction must be a
junction type FGS-MFAW-B.
6356_au
•
7/06
Fibre Cable Raceway Systems
7.38
Number of
Junction Kits
4x12 downspout
•
Fibre Connectivity Solutions
Description
www.adckrone.com
2*
4x12 Downspout
FGS-MDSP-F
Cover for 4x12 Downspout
FGS-SDSP-F
4x12 Trumpet Flare
FGS-MTRM-F
4x12 Downspout
with Rear T
FGS-MDRT-F
4x12 Island T
FGS-ISLAND-F
4x12 Island T with Recessed
Dividing Spool
FGS-ISLAND3-F
(Shown with 12" Junction,
90º Down Elbow and
Trumpet Flare)
4x6 Dual 2"
Flex Tube Attachment
FGS-KT03-B
4x6 Trumpet Flare Kit Shown
Alone and Attached to
4x12 Downspout
FGS-MTRM-B
4x12 to 4x4
Downspout Converter
FGS-HDSI-F/D
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
4x12 System Downspouts and Attachments
The FGS-HSDI-F/D Attached to both the 4x12 Downspout
and the 4x4 Slotted Duct without the use of hardware.
www.adckrone.com
7.39
4x12 System Straight Section
4"H x 12"W
The 4x12 system covers feature a snap-on design. This allows the cover to be used in environments with
limited headroom. Two 914.4mm (3') cover sections come with each order; the shorter length makes it
easier for one person to remove the covers. Each cover kit includes a tether kit. The straight section covers are designed to be placed over the 4x12 downspouts, speeding installation time by reducing the
number of measurements and cuts that need to be made.
4x12 Horizontal Straight Section
FGS-MSHS-F
4x12 Horizontal Straight Section
Cover (includes two 914.4mm (3')
Lengths and Tethering Hardware)
FGS-MSSC-F
4x12 Expandable
Straight Section
FGS-MVAR-F
New 12" Hinged Cover for
Horizontal Straight Section
FGS-MSNC-F
4x12 Straight Section Cover in
Tethered Position
4x12 Straight Section Cover
Attached to Straight Section
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
Description
4x12 horizontal straight section, 1.83m (6') long
FGS-MSHS-F
FGSO-MSHS-F
4x12 expandable straight section
FGS-MVAR-F
FGSO-MVAR-F
4x12 slack storage straight section
FGS-MSHS-STOR-F
FGSO-MSHS-STOR-F
New 4x12 hinged cover kit
for horizontal straight section, includes five
mounting hinges and three clips
FGS-MSNC-F
FGSO-MSNC-F
Kit-10 black capture clips*
FGS-DHCP
FGSO-DHCP
4x12 snap-on cover kit*
for horizontal straight section includes two
914.4mm (3') covers, optional tethering kit
FGS-MSSC-F
FGSO-MSSC-F
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
The unique nine-channel design of the 4x12 FiberGuide® straight sections provides unmatched strength
and allows the attachment of support structure without the need to cut or drill holes within the raceway.
This ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x4, 4x6, and 4x12 systems where higher cable counts apply increased pressure on the
patch cords at the bottom of the raceway.
*See drawings on page 7.64 for more detail on how capture clips and hinges are used.
7.40
www.adckrone.com
4x12 Snap-Fit™ Junction
4" H x 12" W
The new Snap-Fit™ junction is available for the 12-inch FiberGuide®
system. The Snap-Fit junction is a completely tool-less junction. No
additional tools are required for installation or removal. The Snap-Fit
junction exhibits superior holding force and accommodates support
brackets.
Description
4x12 Snap-Fit junction
Yellow System
Catalogue Number
Orange System
Catalogue Number
FGS-MFAW-F
FGSO-MFAW-F
4x12 Snap-Fit Junction
FGS-MFAW-F
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
www.adckrone.com
7.41
Express Exit™ Family
The patented Express Exit™ family accommodates various raceway environments and applications. By simply securing an Express Exit to the
sidewall of any 4x4, 4x6, or 4x12 FiberGuide® straight section, jumpers
can be permanently or temporarily routed to Fibre Optic
Terminal (FOT) equipment below. No cutting of the FiberGuide system
is required. Positioning a drop with a member of the Express Exit family
greatly simplifies installation, protects the integrity of fibres already
present in the raceway, and increases overall flexibility of the raceway
system. All Express Exits guarantee 50.8mm (2") bend radius protection.
Express
Exit Style
Height Above
Exit
Sidewall
Opening
3mm Patch
2mm Patch
Cord Capacity Cord Capacity
Express Exit Family
Hinged
Rear Cover
Exit Fin
Inserts
2-Inch Express Exit 101.6mm (4")
2" x 2"1
150
350
No
No
Low-Profile
Express Exit
50.8mm (2")
2" x 2"1
150
350
No
No
4-Inch Express Exit 101.6mm (4")
4" x 4"
300
700
Yes
Yes
2
1
Accepts all standard 2"x 2" attachments.
Accepts all standard 4"x 4" attachments.
2
4-Inch Express Exit™
The 4-Inch Express Exit is designed to distribute and manage medium
cable counts to FOT or FDF equipment. It features a 4-inch by 4-inch
exit opening to accept all standard 4x4 downspout attachments and
includes insertable exit fins and removable rear cable guides for
additional cable management.
4-Inch Express Exit
Ordering Information
•
4-Inch Express Exit
includes base, base cover, mounting hardware, support
bracket, and exit inserts
FGS-MEXP-E-A/B/F
FGSO-MEXP-E-A/B/F
4-Inch Express Exit rear hinged cover kit
one 4x4, 4x6, 4x12 rear hinged cover
FGS-MEXC-E-A/B/F
FGSO-MEXC-E-A/B/F
4-Inch Express Exit rear hinged cover for 4x4 raceway
FGS-MEXC-E-A
FGSO-MEXC-E-A
4-Inch Express Exit rear hinged cover for 4x6 raceway
FGS-MEXC-E-B
FGSO-MEXC-E-B
4-Inch Express Exit rear hinged cover for 4x12 raceway
FGS-MEXC-E-F
FGSO-MEXC-E-F
7/06
Fibre Cable Raceway Systems
6356_au
Yellow System
Orange System
Catalogue Number Catalogue Number
Description
•
Fibre Connectivity Solutions
For 4x4, 4x6, and 4x12 Systems
7.42
www.adckrone.com
Express Exit™ Family
For 4x4, 4x6, and 4x12 Systems
2-Inch Express Exit™
2-Inch Express Exit
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
Description
2-Inch Express Exit
includes base, base cover, mounting hardware,
and support bracket
FGS-MEXP-A/B/F
FGSO-MEXP-A/B/F
Low-Profile Express Exit™
Designed for low-ceiling or height-restricted environments, the
low-profile Express Exit features a front-removable cover and
extends only 50.8mm (2") above the FiberGuide® straight section
sidewall. It also includes removable rear cable guides for additional
cable management.
Low-Profile Express Exit
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
Description
Low-Profile Express Exit
includes base, base cover, mounting hardware,
and support bracket
FGS-MEXP-LP-A/B/F FGSO-MEXP-LP-A/B/F
Attachments for 2-Inch Express Exit™ and Low-Profile Express Exit™
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
Description
2x2 trumpet flare
includes junction
FGS-MTRM-C
FGSO-MTRM-C
Single 2" flex tube attachment
includes 2" flex tube and a 2x2 junction to attach to
Express Exit unit
1.52m length (5')
3.05m length (10')
4.57m length (15')
FGS-MEX1-C-5F
FGS-MEX1-C-10F
FGS-MEX1-C-15F
FGSO-MEX1-C-5F
FGSO-MEX1-C-10F
FGSO-MEX1-C-15F
Dual 7/8" flex tube attachment
includes two lengths of 7/8" flex tube and a 2" junction
to attach to Express Exit unit
(2) 1.52m length (5')
(2) 3.05m length (10')
(3) 4.57m length (15')
FGS-KT03-C
FGS-KT03-C-10F
FGS-KT03-C-15F
FGSO-KT03-C
FGSO-KT03-C-10F
FGSO-KT03-C-15F
www.adckrone.com
7.43
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
The 2-Inch Express Exit accommodates up to 350, 2mm patch
cords. The patch cords are routed from a 4x4, 4x6, or 4x12
straight section to FOT equipment below the raceway.
Vertical Slotted Duct Systems
1"x 2" and 2"x 2"
Ordering Information
Yellow System
Orange System
Catalogue Number Catalogue Number
Kits
2"x 2" vertical slotted (4" slot spacing) duct kit
1.83m (6') long—includes duct, cover, hose end clamp and five
universal mounting brackets
2"x 2" vertical slotted (1.5" slot spacing) duct kit
1.83m (6') long—includes duct, cover, hose end clamp and five
universal mounting brackets
2"x 2" vertical solid duct kit
1.83m (6') long—includes duct, cover, hose end clamp and five
universal mounting brackets
2"x 1" vertical slotted duct kit (4" slot spacing)
1.83m (6') long—includes duct, cover, hose end clamp and five
universal mounting brackets
2"x 1" vertical solid duct kit
1.83m (6') long—includes duct, cover, hose end clamp and five
universal mounting brackets
Components
2"x 2" to 2"x 1" conversion piece—order when
converting from 2"x 2" to 2"x 1" system
2"x 2" vertical slotted (4" slot spacing) duct, 1.83m (6') long
2"x 2" vertical slotted (1.5" slot spacing) duct,
1.83m (6') long
Cover for 2"x 2" duct, 1.83m (6') long
2"x 2" vertical slotted duct cover clip
2"x 2" vertical duct universal mounting bracket, kit of 5—
typically five brackets used for every 1.83m (6') section of 2"x 2"
vertical duct
FGS-KTW1-C
FGSO-KTW1-C
FGS-KTW1-CA
FGSO-KTW1-CA
FGS-KTW4-C
FGSO-KTW4-C
FGS-KTW1-E
FGSO-KTW1-E
FGS-KTW4-E
FGSO-KTW4-E
FGS-ACC063
FGSO-ACC063
FGS-MSHS-C
FGSO-MSHS-C
FGS-MSHS-CA
FGS-MSHC-C
FGS-CLIP-C
FGS-HWMB-C
FGSO-MSHS-CA
FGSO-MSHC-C
FGS-CLIP-C
FGS-HWMB-C
2"x 2" Vertical Slotted Duct Kit
4" Slot Spacing
FGS-KTW1-C
2"x 2" Vertical Slotted Duct Kit
1.5" Slot Spacing
FGS-KTW1-CA
2"x 2" Vertical Solid Duct Kit
FGS-KTW4-C
2"x 1" Vertical Slotted
Duct Kit
FGS-KTW1-E
2"x 2" to 2"x 1"
Conversion Piece
FGS-ACC063
2"x 2" Vertical Duct Universal
Mounting Brackets
FGS-HWMB-C
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Description
7.44
www.adckrone.com
Vertical Slotted Duct Systems
2"x 4" and 4"x 4"
Ordering Information
Kits
4"x 4" vertical slotted, (4" slot spacing) duct kit
1.83m (6') long—includes duct, cover and three
mounting brackets
2"x 4" vertical slotted, (1.5" slot spacing) duct kit
1.83m (6') long—includes duct, cover and three
mounting brackets
4"x 4" vertical slotted adapter junction kit—used to join
4"x 4" vertical duct to standard 4x4 FiberGuide® profile
Components
4"x 4" vertical slotted duct, 1.83m (6') long
Cover for 2"x 4" and 4"x 4" vertical slotted duct,
1.83m (6') long
4"x 4" vertical slotted duct mounting bracket—
typically three brackets used for every 1.83m (6') section of
4"x 4" vertical duct
2"x 4" vertical slotted duct mounting bracket—kit of 10
2"x 4" vertical slotted duct cap
2"x 4" vertical slotted duct cover clip
4"x 4" vertical slotted duct cover clip
4"x 4" Vertical
Slotted Duct Kit
FGS-KTW2-D
2"x 4" Vertical
Slotted Duct Kit
FGS-KTW2-E
Yellow System
Catalogue No.
Orange System
Catalogue No.
FGS-KTW2-D
FGSO-KTW2-D
FGS-KTW2-E
FGSO-KTW2-E
FGS-MJWR-D
FGSO-MJWR-D
FGS-MSHS-D
FGSO-MSHS-D
FGS-MSHC-D
FGS-HWMB-D
FGSO-MSHC-D
FGS-HWMB-D
FGS-HKW2-E
FGS-HMEC-E
FGS-CLIP-E
FGS-CLIP-D
FGS-HKW2-E
FGS-HMEC-E
FGS-CLIP-E
FGS-CLIP-D
4"x 4" Vertical Slotted
Adapter Junction Kit
FGS-MJWR-D
Fibre Cable Raceway Systems
4"x 4" Vertical Duct
Mounting Bracket
FGS-HWMB-D
7/06
•
6356_au
•
Fibre Connectivity Solutions
Description
www.adckrone.com
7.45
2x2 System Support Kits
For Yellow and Orange Systems
Direct Support Kits
Ordering Information
Catalogue Number
2x2 ladder rack support kit—for use with 88.9mm (maximum) ladder rack
FGS-HLR2-C
2x2 bay top support short L bracket kit
FGS-BTBS-C
2x2 bay top support long L bracket kit
FGS-BTBL-C
2x2 digital cableway support kit
FGS-HDCB-C
2x2 under floor support kit—can be secured to 15.7mm to 30.5mm round or square post
FGS-HUFB-C
Note: Recommended spacing of direct support kits is every 610mm to 914mm.
Custom brackets are available, please contact ADC KRONE.
2x2 Ladder Rack Support Kit
Shown Alone and Attached to
Ladder Rack: FGS-HLR2-C
2x2 Digital Cableway
Support Kit: FGS-HDCB-C
2x2 Bay Top Support Short L
Bracket Kit: FGS-BTBS-C
2x2 Under Floor Support Kit
Shown Alone and Attached to
15.7mm Round Pipe: FGS-HUFB-C
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Description
7.46
www.adckrone.com
2x2 Bay Top Support Long L
Bracket Kit: FGS-BTBL-C
2x2 System Support Kits
For Yellow and Orange Systems
Track Support Kits
Description
Catalogue No.
Aluminium track support kit, 1.83m long, includes track connecting bar kit—
aluminium track is self-supporting for spans up to 1.83m
FGS-HASK-C
2x2 new threaded rod bracket kit, 5/8"—used to support aluminium track kit
FGS-HTR2-5/8
2x2 new threaded rod bracket kit, 1/2"—used to support aluminium track kit
FGS-HTR2-1/2
2x2 existing thread rod bracket kit for up to two 2x2 FiberGuide® systems
FGS-HTR2-2-5/8
Track connecting bar kit—used to join two aluminium track kits; order only
if extras are needed
FGS-HAEJ-C
2" new threaded rod bracket kit, 12mm
FGS-HTR2-12MM
Note: Recommended spacing of track support kits is every 1.52m to 1.83m.
Custom brackets are available, please contact ADC KRONE.
Aluminium Track Support Kit
FGS-HASK-C
2" New Threaded Rod Bracket
Kit Shown Alone and Attached
to Aluminium Track Support
FGS-HTR2-XX
2" Existing Threaded Rod
Bracket Kit
FGS-HTR2-2-5/8
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Ordering Information
www.adckrone.com
7.47
2x6, 4x4, 4x6 Systems Support Kits
For Yellow and Orange Systems
Ordering Information
Description
Catalogue Number
Ladder rack cantilever support bracket kit
FGS-HDLB-4
L bay support bracket kit
FGS-HLBK
New threaded rod bracket kit (XX = size: 1/2", 5/8", 12mm, 14mm, 16mm, 18mm)
FGS-HETR-XX
Modified new threaded rod bracket kit, 5/8"
FGS-HNTR-5/8-A
Top support low-profile C-bracket kit (XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HNTS-XX-LP
5
Top support C-bracket kit (XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HNTS-XX
Modified existing threaded rod bracket kit, 5/8"
FGS-HETR-5/8-A
Center support bracket kit (XX = size: 1/2", 5/8", 12mm, 14mm, 16mm, 20mm)
FGS-HTUB-XX
Digital cableway bracket kit, 304.8mm (12")
FGS-HCBL-12
Digital cableway bracket kit, 381mm (15")
FGS-HCBL-15
Ladder rack centre support bracket kit
FGS-HNLR-AB
OMX frame centre support bracket kit, 16mm
FGS-HOMX-16MM
Under floor support bracket kit
FGS-HUFB-A
Custom brackets are available, please contact ADC KRONE.
Ladder Rack
Cantilever Support Bracket Kit
FGS-HDLB-4
L Bay Support Bracket
Shown Alone and
Attached to 4x4 FiberGuide
FGS-HLBK
New Threaded Rod Bracket
Kit Shown Alone and
Attached to Threaded Rod
FGS-HNTR-XX
Existing Threaded Rod Bracket
Kit Shown Alone and
Attached to Threaded Rod
FGS-HETR-XX
Modified New Threaded Rod
Bracket Kit Shown Alone and
Attached to Threaded Rod
FGS-HNTR-5/8-A
Top Support C-Bracket
Low Profile
FGS-HNTS-XX-LP
Top Support C-Bracket
FGS-HNTS-XX
Modified Existing Threaded Rod
Bracket Kit Shown Alone and
Attached to Threaded Rod
FGS-HETR-5/8-A
Centre Support Bracket
FGS-HTUB-XX
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
FGS-HNTR-XX
Existing threaded rod bracket kit (XX = size: /2", /8", 12mm, 14mm, 16mm)
1
7.48
www.adckrone.com
4x12 System Support Kits
For Yellow and Orange Systems
Ordering Information
Catalogue Number
New ladder rack centre support bracket kit
FGS-HNLR-F
Existing ladder rack centre support bracket kit
(XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HETP-F-XX
Trapeze bracket kit
(XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HNTP-F-XX
Centre support threaded rod bracket kit
(XX = size: 1/2", 5/8", 12mm, 14mm, 16mm, 20mm)
FGS-HTUB-F-XX
Top support low-profile threaded rod bracket kit
(XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HNTS-F-XX-LP
Top support threaded rod bracket kit
(XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HNTS-F-XX
New threaded rod bracket kit
(XX = size: 5/8", 14mm, 16mm, 18mm)
FGS-HNTR-F-XX
Existing threaded rod bracket kit
(XX = size: 5/8", 14mm, 16mm)
FGS-HETR-F-XX
Custom brackets are available, please contact ADC KRONE.
Existing Ladder Rack Centre
Support Bracket Kit
FGS-HETP-F-XX
Trapeze Bracket Kit
FGS-HNTP-F-XX
Centre Support Bracket Kit
Shown Alone and Attached to
Threaded Rod
FGS-HTUB-F-XX
Top Support Low-Profile Kit
Shown Alone and Attached to
Threaded Rod
FGS-HNTS-F-XX-LP
Top Support Threaded Rod
Bracket Kit
FGS-HNTS-F-XX
New Threaded Rod Bracket Kit
FGS-HNTR-F-XX
Existing Threaded Rod
Bracket Kit
FGS-HETR-F-XX
www.adckrone.com
7.49
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
Description
Accessories
Ordering Information
Yellow System
Catalogue Number
FGS-KT09
FGS-KT09
2" outer diameter slotted flex tube
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MIDY-XF
FGSO-MIDY-XF
1" outer diameter slotted flex tube
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MLDY-XF
FGSO-MLDY-XF
7
/8" outer diameter slotted flex tube
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MFTY-XF
FGSO-MFTY-XF
2" outer diameter solid flex tube
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
FGS-MISY-XF
FGSO-MISY-XF
Single hinges for 4x4 and 4x6 covers
FGS-HHGK
FGS-HHGK
Vertical spring hinges, kit of 3
FGS-HVHG
FGS-HVHG
Retainer rings, kit of 10—used to retain fibres in
2" flex tube
FGS-HFRR-10
FGS-HFRR-10
Flex tube clamp, kit of 10—used to secure
2" flex tube to 2" vertical ducts
FGS-HHEC-10
FGS-HHEC-10
Storage spools for dark fibre jumpers—kit of 2
FGS-MSTOR-A/B/F
FGS-MSTOR-A/B/F
Mitre box with saw—used to cut 2x2, 4x4, 4x6,
and 4x12 FiberGuide® straight sections to size
FGS-MKIT-ABF
FGS-MKIT-ABF
Mitre box with saw—used to cut 2x2, 4x4,
and 4x6 FiberGuide straight sections to size
FGS-MKIT
FGS-MKIT
IFC tie down
for 4x4 system
for 4x6 system
for 4x12 system
FGS-HIFC-A
FGS-HIFC-B
FGS-HIFC-F
FGS-HIFC-A
FGS-HIFC-B
FGS-HIFC-F
Quick knobs with T-bolt
FGS-KQKB
FGS-KQKB
Reverse junction adapter kit for 4x4, 4x6, and 4x12 systems—
used to connect two parts rotated 180°
FGS-HRJA-A/B/F
FGS-HRJA-A/B/F
Retrofit fin, kit of 10
FGS-MFIN-10
FGS-MFIN-10
6356_au
•
7/06
Fibre Cable Raceway Systems
7.50
Orange System
Catalogue Number
Trough cover clip kit
•
Fibre Connectivity Solutions
Description
www.adckrone.com
2" Outer Diameter
Slotted Flex Tube
FGS-MIDY
7/8" Outer Diameter
Slotted Flex Tube
FGS-MFTY
Single Hinges for
4" and 6" Covers
FGS-HHGK
Retainer Rings
FGS-HFRR-10
Flex Tube Clamp
FGS-HHEC-10
Storage Spools
FGS-MSTOR-A/B/F
FGS-MSTOR-A/B/F
(Shown Installed)
Mitre Box and Saw
FGS-MKIT-ABF
Retrofit Fin—Set of 10
FGS-MFIN-10
Quick Knobs—Kit of 10
FGS-KQKB
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
Accessories
www.adckrone.com
7.51
Support Kit Accessories
For Yellow and Orange Systems
Description
Catalogue Number
Threaded rod
5
/8"—11 x 12"
5
/8"—11 x 30"
5
/8"—11 x 72"
1
/2"—13 x 12"
1
/2"—13 x 30"
1
/2"—13 x 72"
FGS-HTHR-5/8-12
FGS-HTHR-5/8-30
FGS-HTHR-5/8-72
FGS-HTHR-1/2-12
FGS-HTHR-1/2-30
FGS-HTHR-1/2-72
Threaded rod; (XX = size: 12mm, 14mm, 16mm)
(NN = length: 30cm, 75cm, 180cm)
•
7/06
Fibre Cable Raceway Systems
7.52
FGS-HTHR-XX-NN
Auxiliary framing kit
2" x 9/16" x 3/16" for 5/8" rod
2" x 9/16" x 3/16" for 1/2" rod
FGS-HFCK-5/8
FGS-HFCK-1/2
Adjustable angle support brackets with 5/8" threaded rod
11 x 36" rod
11 x 48" rod
FGS-HASB-5/8-36
FGS-HASB-5/8-48
Adjustable angle support brackets with 1/2" threaded rod
13 x 36" rod
13 x 48" rod
FGS-HASB-1/2-36
FGS-HASB-1/2-48
Ladder rack bracket kit for radiused ladder racking
FGS-HLDR-A
Ladder rack bracket kit, 1/2", 5/8", 12mm, 14mm, 16mm
FGS-HLDR-XX
Unistrut nut kit, /8"
FGS-HDGR
Frame mounting hardware kit (XX = size: 1/2", 5/8", 12mm, 14mm, 16mm)
FGS-HKFM-XX
5
Threaded Rod
FGS-HTHR
Auxiliary Framing Kit
FGS-HFCK
Ladder Rack Bracket Kit
Shown Alone and
Attached to Ladder Rack
FGS-HLDR
Unistrut Nut Kit
FGS-HDGR
6356_au
•
Fibre Connectivity Solutions
Ordering Information
www.adckrone.com
Adjustable Angle
Support Brackets
FGS-HASB
2x2 Horizontal T
FGS-MHTA-C
2x2 Horizontal Cross
FGS-MHXP-C
2x2 45° Horizontal Elbow
FGS-MH4A-C
2x2 90° Horizontal Elbow
FGS-MH9A-C
2x2 90° Horizontal Elbow
FGS-MH9A-C-45/2
2x2 45° Up Elbow
FGS-MU4A-C
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
2x2 System Parts
www.adckrone.com
7.53
2x2 45° Down Elbow
FGS-MD4A-C
2x2 to 4x4 Straight Adapter
FGS-MDSA-AC
2x2 Standard Downspout
FGS-MSDS-C
2x2 Extended Downspout
FGS-KDH2-C
2x2 Horizontal Straight Section
FGS-MSHA-C
2x2 90º Up Elbow
FGS-MU9A-C
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x2 System Parts
2x2 90º Down Elbow
FGS-MD9A-C
7.54
www.adckrone.com
2x6 to 2x2 Downspout
FGS-MDSP-G
2x6 Horizontal T
FGS-MHRT-G
2x6 90º Horizontal Elbow
FGS-MH9E-G
2x6 Horizontal Cross
FGS-MHXP-G
2x6 90º Down Elbow
FGS-MD9E-G
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x6 System Parts
2x6 45º Horizontal Elbow
FGS-MH4E-G
2x6 45º Up Elbow
FGS-MU4E-G
www.adckrone.com
7.55
2x6 to 4x6 Adapter
FGS-MDSA-GB
2x6 to 4x4 Adapter
FGS-MDSA-GA
2x6 Trumpet Flare
FGS-MTRM-G
2x6 45º Down Elbow
FGS-MD4E-G
Low-Profile 2x6
Express Exit™ Downspout
FGS-MEXP-LP-G
2x6 Straight Section
FGS-MSHS-G
•
2x6 Junction
FGS-JUNC-G
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x6 System Parts
Hinged Covers for 2x6 Straight Section
FGS-MSNC-B/G
7.56
Snap-on Covers for 2x6 Horizontal Straight Section
FGS-MSSC-B/G
www.adckrone.com
4x4 Horizontal T
FGS-MHRT-A
4x4 Horizontal Cross
FGS-MHXP-A
4x4 90° Horizontal Elbow
FGS-MH9E-A
4x4 90° Up Elbow
FGS-MU9E-A
4x4 90° Down Elbow
FGS-MD9E-A
4x4 45° Horizontal Elbow
FGS-MH4E-A
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
4x4 System Parts
www.adckrone.com
7.57
4x4 45° Up Elbow
FGS-MU4E-A
4x4 45° Down Elbow
FGS-MD4E-A
4x4 to 4x6 Straight Adapter
FGS-MDSA-AB
4x4 Expandable Straight Section
FGS-MVAR-A
4x4 Downspout
FGS-MDSP-A
•
4x4 Cut-in T
FGS-MHIS-A
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
4x4 System Parts
4x4 Extended Downspout
FGS-MDSP-EX-A
7.58
Snap-On Cover for 4" Straight Section
FGS-MSSC-A
www.adckrone.com
4x4 Trumpet Flare Kit
FGS-MTRM-A
4x4/4x6 Downspout Insert
FGS-HDSI-AB
4" Square to 2" Round Adapter
with Flex Tube
FGS-ASRI
4x4 Horizontal Straight Section
FGS-MSHS-A
4x4 Snap-Fit Junction Assembly
FGS-MFAW-A
www.adckrone.com
7.59
Fibre Cable Raceway Systems
Hinged Cover for 4" Horizontal
Straight Section
FGS-MSNC-A
7/06
•
6356_au
•
Fibre Connectivity Solutions
4x4 System Parts
4x6 Horizontal T
FGS-MHRT-B
4x6 Horizontal Cross
FGS-MHXP-B
4x6 90° Horizontal Elbow
FGS-MH9E-B
4x6 45° Horizontal Elbow
FGS-MH4E-B
4x6 90º Up Elbow
FGS-MU9E-B
4x6 90° Down Elbow
FGS-MD9E-B
4x6 45° Up Elbow
FGS-MU4E-B
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
4x6 System Parts
4x6 45° Down Elbow
FGS-MD4E-B
7.60
www.adckrone.com
4x6 Expandable Straight Section
FGS-MVAR-B
6" Trumpet Flare
FGS-MTRM-B
4x6 Cut-in T
FGS-MHIS-B
4x6 Extended Downspout
FGS-MDSP-EX-B
4x6 Downspout
FGS-MDSP-B
7/06
Hinged Cover for 6" Straight Section
FGS-MSNC-B/G
6" Snap-Fit Junction Assembly
FGS-MFAW-B
www.adckrone.com
6" Slack Storage Straight Section
FGS-MSHS-STOR-B
7.61
Fibre Cable Raceway Systems
Snap-On Cover for 6" Straight Section
FGS-MSSC-B/G
6" Straight Section
FGS-MSHS-B
•
6356_au
•
Fibre Connectivity Solutions
4x6 System Parts
4x12 Horizontal Cross
FGS-MHXP-F
4x12 90° Horizontal Elbow
FGS-MH9E-F
4x12 90° Down Elbow
FGS-MD9E-F
4x12 45° Horizontal Elbow
FGS-MH4E-F
4x12 45° Up Elbow
FGS-MU4E-F
4x12 45° Down Elbow
FGS-MD4E-F
4x12 Horizontal T with (one) 6" Exit
FGS-MHRT-F/B
•
7/06
Fibre Cable Raceway Systems
4x12 Horizontal T
FGS-MHRT-F
6356_au
•
Fibre Connectivity Solutions
4x12 System Parts
7.62
www.adckrone.com
4x12 Horizontal Cross with (two) 6" Exits
FGS-MHXP-F/B
4x12 to 4x6 Dual Adapter
FGS-MDSA-F2B
4x12 to 4x6 Adapter
FGS-MDSA-FB
4x12 End Cap
FGS-HMEC-F
4x12 Expandable Straight Section
FGS-MVAR-F
4x12 Cut-in T
FGS-MHIS-F
4x12 Exit Downspout
FGS-MDSP-F
4x12 Trumpet Kit
FGS-MTRM-F
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
4x12 System Parts
www.adckrone.com
7.63
4x12 Island T
FGS-ISLAND-F
4x12 T with Recessed Dividing Spool
FGS-ISLAND3-F
4x12 Straight Section
FGS-MSHS-F
14.43"
(36.65 cm)
.96"
(2.44 cm)
Side
End
3.67"
(9.32 cm)
Straight Section
(Not Included)
Hinged Cover for 12 Horizontal Straight Section
FGS-MSNC-F
4x12 Downspout with Rear T
FGS-MDRT-F
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
4x12 System Parts
4x12 Snap-Fit Junction
FGS-MFAW-F
7.64
www.adckrone.com
4x12 Slack Storage Straight Section
FGS-MSHS-STOR-F
2-inch Express Exit™
(Shown Attached to 4x6 Straight Section)
FGS-MEXP-A/B/F
Low-Profile Express Exit™
(Shown Attached to 4x4 Straight Section)
FGS-MEXP-LP-A/B/F
Fibre Cable Raceway Systems
4-inch Express Exit™
(Shown Attached to 4x4 Straight Section)
FGS-MEXP-E-A/B/F
7/06
•
6356_au
•
Fibre Connectivity Solutions
Express Exit™ Family
www.adckrone.com
7.65
2" Ladder Rack Support Kit
(Shown Alone and Attached to Ladder Rack)
FGS-HLR2-C
2" Bay Top Support Short
L Bracket Kit
FGS-BTBS-C, FGS-BTBL-C
2" Digital Cable Way
Support Kit
FGS-HDCB-C
2" Under Floor Support Kit
(Shown Attached to .62x2 Round Pipe)
FGS-HUFB-C
Aluminium Track Support Kit
FGS-HASK-C
2" New Threaded Rod Bracket Kit
(Shown Attached to Aluminium Track Support)
FGS-HTR2
•
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x2 System Support Kits
7.66
www.adckrone.com
New Threaded Rod Bracket Kit Shown Alone
and Attached to Threaded Rod
FGS-HNTR
Existing Threaded Rod Bracket Kit Shown Alone
and Attached to Threaded Rod
FGS-HETR
Modified Existing Threaded Rod Bracket Kit Shown Alone
and Attached to Threaded Rod
FGS-HETR-XX-A
Ladder Rack Center
Support Bracket Kit
FGS-HNLR-AB
OMX Frame Center
Support Bracket Kit
FGS-HOMX-16MM
Under Floor Support
Bracket Kit
FGS-HUFB-A
7/06
•
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x6, 4x4, and 4x6 Systems Support Kits
www.adckrone.com
7.67
Support Bracket Shown Alone and Attached
to 4" FiberGuide®
FGS-HLBK
Digital Cableway Bracket Kit Shown Alone and
Attached to 4" FiberGuide®
FGS-HCBL
Unistrut Nut Kit
FGS-HDGR
Center Support Bracket
FGS-HTUB
•
Ladder Rack Cantilever
Support Bracket Kit
FGS-HDLB-4
7/06
Fibre Cable Raceway Systems
6356_au
•
Fibre Connectivity Solutions
2x6, 4x4, and 4x6 Systems Support Kits
Top Support Low-Profile C-Bracket
FGS-HNTS-LP
7.68
www.adckrone.com
Top Support C-Bracket
FGS-HNTS
4x12 System Support Kits
12" FiberGuide
Split Nut
Bracket Clip
Bottom Bracket
Threaded
Rod Ref
Cantilever
Bracket
T-Bolt
16.50"
(41.91 cm)
New Threaded Rod Bracket Kit
(Shown alone and attached to Threaded Rod)
FGS-HNTR-F-XX
Existing Threaded Rod Bracket Kit
FGS-HETR-F-XX
Top Support Threaded Rod C-Bracket Kit
(Shown attached to 4x12 Straight Section)
FGS-HNTS-F-XX
Top Support Low Profile Threaded Rod C-Bracket Kit
(Shown attached to 4x12 Straight Section)
FGS-HNTS-F-XX-LP
Center Support Threaded Rod Bracket Kit
(Shown attached to 2x12 Straight Section)
FGS-HTUB-F-XX
Ladder Rack Center
Support Bracket
FGS-HNLR-F
Fibre Cable Raceway Systems
7/06
•
6356_au
•
Fibre Connectivity Solutions
1.25"
(3.18 cm)
Trapeze Bracket
FGS-HNTP-F
www.adckrone.com
7.69